CATALOGO GENERALE
GENERAL CATALOGUE
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
CATALOGO GENERALE - GENERAL CATALOGUE 1
VAREM
L’AZIENDA
Le attività di Varem oggi si sviluppano nelle sedi di Bovolenta, dov’è ubicata la sede legale dell’azienda, e a Limena.Nei due stabilimenti di Bovolenta, sono prodotti i serbatoi di piccole dimensioni, è realizzato lo stampaggio delle membrane e si trova la sede logistica con il magazzino di spedizione di tutti i prodotti.Nella sede di Limena sono ubicati la Direzione, i laboratori di Ricerca e Sviluppo, l’attrezzeria, e sono realizzati tutti gli altri prodotti, oltre ad ospitare gli uffi ci per la progettazione e prototipazione di nuovi prodotti e linee produttive.
LE ORIGINI DI UN SUCCESSO
La storia di Varem è saldamente ed intimamente legata come origini, territorialità e cultura aziendale al nord est d’Italia. Un’area geografica del Paese che dal primo dopoguerra ha visto la propria economia e sviluppo industriale esplodere in modo tumultuoso ed esponenziale grazie all’abnegazione, al lavoro, all’inventiva, al desiderio ed al coraggio di fare impresa dell’infaticabile popolo veneto.In questo contesto Luigino Benettolo ha fondato Varem, dando il proprio contributo a far diventare il Veneto una delle regioni più industrializzate al mondo, promuovendo e facendo riconoscere il “made in Italy” a livello internazionale come sinonimo di qualità, affidabilità e tecnologia all’avanguardia.Inizialmente precursore e successivamente leader del settore nella produzione di vasi di espansione ed autoclavi, Varem è stata sempre coerente con le proprie origini, rafforzando costantemente nel tempo la sua posizione di leadership e divenendo nel contempo un punto di riferimento per i competitor ed il mercato.
THE COMPANY
Varem’s operations currently take place in the premises in Bovolenta, where it has its registered office, and in Limena.In the two Bovolenta plants small tanks are produced and membranes are molded, and it is here that the logistics department is located, with a warehouse from which all products are shipped.The premises in Limena contain the Management offices, the R&D laboratories, the tooling department and it is here that all other products are manufactured; the offices for the design and prototyping of new products and production lines are also located here.
THE ORIGINS OF SUCCESS
Varem’s history is firmly and closely linked, as origins, territoriality and company culture, to the north-east of Italy. In the post-war period, the economy and industrial development of this geographical area of the country exploded tumultuously and exponentially, thanks to the renuncia-tion, hard work, creativity, spirit and courage to enter into business of the tireless Veneto people.It was in this context that Luigino Benettolo founded Varem, helping to make Veneto one of the most highly industrialized areas in the world, promoting and raising the aware-ness of “Made in Italy” throughout the world as synonym of quality, reliability and cutting edge technology.First as forerunner and then as leader in the field of expansion vessel and autoclave manufacture, Varem has always remained coherent with its origins, constantly streng-thening its leadership position over time and simultaneously setting the standard for com-petitors and for the market.
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
3
SUMMARYINDICE
HEATING LINELINEA RISCALDAMENTO 5
HOT POTABLE WATER MULTIFUNCTION LINELINEA TERMOSANITARIO MULTIFUNZIONE 11
WATER LINELINEA SOLLEVAMENTO 15
HEAT EXCHANGERSSCAMBIATORI DI CALORE 21
BOILERS AND INSULATED TANKSBOLLITORI E SERBATOI COIBENTATI 27
ACCESSORIES AND SPARE PARTSACCESSORI E RICAMBISTICA 37
CATALOGO GENERALE - GENERAL CATALOGUECooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
CATALOGO GENERALE - GENERAL CATALOGUE
GENERAL CATALOGUECATALOGO GENERALE
Il vaso di espansione per impianti termici sopporta la dilatazione di volume dell’acqua causata dall’aumento di temperatura nel circuito e protegge l’impianto da pericolose variazioni di pressione. Il lavoro del vaso di espansione è ancora più importante in fase di avviamento dell’impianto quando l’acqua subisce un notevole aumento di temperatura.
Per ulteriori informazioni sul corretto dimensionamento dei prodotti, visitare il sitowww.varem.com
The expansion vessel for heating systems makes available the volume for water dilation due to temperature increments, and keeps the system safe to dangerous pressure variations. The working of the expansion vessels is more important during system start-up, when water temperature rises very quickly.
For further information about the correct dimensioning of the products, please visit the web site www.varem.com
HEATING LINE
LINEA RISCALDAMENTO
5Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
HEATING LINELINEA RISCALDAMENTO
SCHEMA DI UN IMPIANTO DI RISCALDAMENTO SCHEME OF A HEATING SYSTEM
CATALOGO GENERALE - GENERAL CATALOGUE6
SCHEMA DI UN IMPIANTO SOLARE TERMICO SCHEME OF A SOLAR SYSTEM
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Modello Capacità Pressione max
Raccordo Dimensioni Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Max. pressure
Connection Dimensions Packaging Qty/pallet
lt bar inch mm m3 n.LR 35 UR035231 UR035231CS000000 35 6 3/4’ 320X525 0.064 42LR 50 UR050271 UR050271CS000000 50 6 3/4’ 380X620 0.104 25LR 60 UR060371 UR060371CS000000 60 6 1’ 380X670 0.116 20LR 80 UR080371 UR080371CS000000 80 6 1’ 450X662 0.135 20
LR 100 UR100371 UR100371CS000000 100 6 1’ 450X730 0.173 15LR 150 UR150471 UR150471CS000000 150 6 1’½ 554X807 0.265 8LR 200 UR200471 UR200471CS000000 200 6 1’½ 554X988 0.324 8LR 250 UR250471 UR250471CS000000 250 6 1’½ 624X1006 0.423 6LR 300 UR300471 UR300471CS000000 300 6 1’½ 630X1160 0.481 6LR 400 UR400471 UR400471CS000000 400 6 1’½ 624X1520 0.770 6LR 500 UR500471 UR500471CS000000 500 6 1’½ 775X1250 1.126 1LR 600 UR600471 UR600471CS000000 600 6 1’½ 775X1525 1.349 1LR 700 UR700471 UR700471CS000000 700 6 1’½ 775X1635 1.438 1LR 1000 URN10H61 URN10H61CS000000 1000 6 2’ 900X1923 2.200 1
MAXI
VARE
M LR
CE
Codice standard - Standard Code
CATALOGO GENERALE - GENERAL CATALOGUE
HEATING LINELINEA RISCALDAMENTO
Membrana sostituibile, flangia avvitata da 50 lt. Replaceable membrane, screwed flange from 50 lt.
• Flangia in acciaio zincato fino a 400 lt, verniciata da 500 a 1000 lt
• Pressione di precarica 1,5 bar• Colore rosso
• Galvanized carbon steel flange up to 400 lt, coated from 500 lt to 1000 lt.
• Pre charge pressure 1,5 bar• Red colour
VASI DI ESPANSIONE PER IMPIANTI DI RISCALDAMENTO
EXPANSION VESSELS FOR HEATING SYSTEMS
7
Membrana fissa, flangia aggraffata Fixed membrane, crimped flange
-10 +99 °C
-10 +99 °C
Modello Capacità Press. max
Raccordo Dimensioni Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Max. pressure
Connection Dimensions Packaging Qty/pallet
lt bar inch mm m3 n.LR 5 R1005231 R1005231CS000000 5 6 3/4’ 160x325 0.010 210LR 8 R1008231 R1008231CS000000 8 6 3/4’ 200x330 0.016 144LR 12 UR012231 UR012231CS000000 12 6 3/4’ 270x310 0.024 72LR 18 UR018231 UR018231CS000000 18 6 3/4’ 270x425 0.034 56LR 25 UR025231 UR025231CS000000 25 6 3/4’ 290x468 0.041 42LR 40 UR040231 UR040231CS000000 40 5 3/4’ 320x580 0.068 36
EXTR
AVAR
EM L
R CE
Codice standard - Standard Code
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Modello Capacità Press. max Raccordo Dimensioni Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Max. pressure Connection Dimensions Packaging Qty/pallet
lt bar inch mm m3 n.
LR SI 12 RX012 RX01200000000000 12 10 3/4’M + 3/4’F 270x305 0.024 72LR SI 18 RX018 RX01800000000000 18 10 3/4’M + 3/4’F 270x450 0.034 56
PREVASO SOLARE - SOLAR PRE-TANK
SOLA
R VA
REM
CE
Codice standard - Standard Code
Modello Capacità Press. max Raccordo Dimensioni Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Max. pressure Connection Dimensions Packaging Qty/palletlt bar inch mm m3 n.
LR SV 50 R8050286 R8050281S4000000 50 10 3/4’ 320x620 0.104 25LR SV 60 R8060286 R8060281S4000000 60 10 3/4’ 380x670 0.116 20LR SV 80 R8080286 R8080281S4000000 80 10 3/4’ 450x662 0.135 20LR SV 100 R8100386 R8100381S4000000 100 10 1’ 450x732 0.173 15LR SV 150 R8150486 R8150481S4000000 150 10 1’½ 554x807 0.265 8LR SV 200 R8200486 R8200481S4000000 200 10 1’½ 554x988 0.324 8LR SV 300 R8300486 R8300481S4000000 300 10 1’½ 624x1160 0.481 6LR SV 500 R8500486 R8500481S4000000 500 8 1’½ 780x1250 1.126 1
SOLA
R VA
REM
CE
Codice standard - Standard Code
Modello Capacità Press. max Raccordo Dimensioni Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Max. pressure Connection Dimensions Packaging Qty/palletlt bar inch mm m3 n.
LR S 5 R80052** R8005241CS000000 5 ** 3/4’ 160x327 0.02 210LR S 8 R80082** R8008241CS000000 8 ** 3/4’ 200x343 0.031 144LR S 12 R80122** R8012241CS000000 12 ** 3/4’ 270x305 0.024 72LR S 18 R80182** R8018241CS000000 18 ** 3/4’ 270x422 0.034 56LR S 25 R80252** R8025241CS000000 25 ** 3/4’ 290x468 0.041 63LR S 40 R80402** R8040241CS000000 40 ** 3/4’ 320x576 0.066 36
SOLA
R VA
REM
CE
Codice standard - Standard Code
CATALOGO GENERALE - GENERAL CATALOGUE
HEATING LINELINEA RISCALDAMENTO
• Membrana resistente a picchi di 130°Pressione di precarica 2,5 bar
• Membrane resistant to peaks of 130°Pre charge pressure 2,5 bar
VASI DI ESPANSIONE PER IMPIANTI SOLARI
EXPANSION VESSELS FOR SOLAR SYSTEMS
8
**Configurazioni:41. flangia in acciaio inox aggraffata, membrana fissa, colore rosso, pressione massima 8 bar 48. flangia in acciaio inox aggraffata, membrana fissa, colore bianco, pressione massima 8 bar86. flangia in acciaio inox avvitata, membrana sostituibile, colore rosso, pressione massima 10 bar
**Configurations:41. stainless steel crimped flange, fixed membrane, red color, max pressure 8 bar48. stainless steel crimped flange, fixed membrane, white color, max pressure 8 bar86. stainless steel screwed flange, replaceable membrane, red color, max pressure 10 bar
Flangia in acciaio inox avvitata, membrana sostituibile, colore rosso
Stainless steel screwed flange, replaceable membrane, red color
Serbatoio a doppio raccordo senza membrana Double connection tank without membrane
-10 +130 °C
-10 +130 °C
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Modello Capacità Press. Max Raccordo Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Max. pressure Connection Packaging Qty/pallet
lt bar Inch std m3 n.
LR O 7.5 C7007231G C7007231CSG00000 7.5 4 3/4’ 110x493x192 0.08 144
LR O 10 C7010231 C7010231CS000000 10 4 3/4’ 110x633x192 0.08 56
Codice standard - Standard Code
Vasi a membrana fissa, flangia in acciao zincato - fix membrane tanks, galvanised steel flange
Dimensioni
Dimensions
mm
EXTR
AVAR
EM L
R
VASI DI ESPANSIONE OVALI - OVAL SHAPE EXPANSION VESSELS
Modello Capacità Press. Max Raccordo Imballo Qtà/scatolaItem Vecchio - Old Nuovo - New Capacity Max. pressure Connection Packaging Qty/carton
lt bar Inch std m3 n.LR P 504 7 C6007931 C600793100000000 7 3 3/8’ 203x504x66 0.08 2LR P 504 8 C6008931 C600893100000000 8 3 3/8’ 203x504x74 0.09 2
LR P 504 10 C6010931 C601093100000000 10 3 3/8’ 203x504x107 0.09 1LR P 504 12 C6014931 C601493100000000 12 3 3/8’ 203x504x116 0.09 1
Codice standard - Standard Code DimensioniDimensions
mm
FLAT
VARE
M
Modello Capacità Press. Max Raccordo Imballo Qtà/scatolaItem Vecchio - Old Nuovo - New Capacity Max. pressure Connection Packaging Qty/carton
lt bar Inch std m3 n.LR P 325 6 C2006231 C200623100000000 6 3 3/8’ 325x103 0.052 4LR P 325 8 C2008231 C200823100000000 8 3 3/4’ 325x128 0.06 4
LR P 325 10 C2010231 C201023100000000 10 3 3/4’ 325x136 0.067 4LR P 325 12 C2012231 C201223100000000 12 3 3/4’ 325x160 0.074 4LR P 385 5 C1005B31 C1005931B0000000 5 3 3/4’ 385x76 0.078 5LR P 385 6 C1006231 C100623100000000 6 3 3/4’ 385x86 0.078 5LR P 385 7 C1007231 C100723100000000 7 3 3/4’ 385x92 0.078 5LR P 385 8 C1008231 C100823100000000 8 3 3/4’ 385x103 0.088 5
LR P 385 10 C1010231 C101023100000000 10 3 3/4’ 385x110 0.095 5LR P 385 12 C1012231 C101223100000000 12 3 3/4’ 385x142 0.092 4LR P 385 14 C1014231 C101423100000000 14 3 3/4’ 385x160 0.097 4LR P 385 18 C1018231 C101823100000000 18 3 3/4’ 385x190 0.033 1LR P 392 6 C3006B31 C3006931B0000000 6 3 3/8’ 392x86 0.078 3
DimensionsCodice standard - Standard Code
mm
FLAT
VARE
M
Dimensioni
Connection 1/4’, 3/8’, 1/2’, 3/4’ radial or axial can be available upon request
CATALOGO GENERALE - GENERAL CATALOGUE
HEATING LINELINEA RISCALDAMENTO
• Membrana fissa a diaframma• Pressione di precarica 1 bar• Colore rosso
• Diaphragm fix membrane• Pre charge pressure 1 bar• Red color
VASI DI ESPANSIONE PIATTI E OVALI PER CALDAIE
FLAT AND OVAL EXPANSION VESSELS FOR BOILERS
9
Connessione 1/4’, 3/8’, 1/2’, 3/4’ radiale o assiale possono essere disponibili a richiesta
-10 +99 °C
-10 +99 °C
-10 +99 °C
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
CATALOGO GENERALE - GENERAL CATALOGUE
I vasi di espansione Varem della linea Multifunzione LC vengono utilizzati negli impianti di acqua calda sanitaria o in funzione anti colpo d’ariete.Forniscono un’adeguata risposta ai problemi di dilatazione termica degli impianti di riscaldamentoe al problema del colpo d’ariete. Fungono inoltre da volano idraulico.Progettati per contenere acqua potabile, sono tutti dotati di membrana con certificazione di alimentarietà.
Per ulteriori informazioni sul corretto dimensionamento dei prodotti, visitare il sitowww.varem.com
The expansion vessels of the Varem LC Multifunction line are used in the domestic hot water systems or as water hammerarrester. The LC expansion vessels protect the system against the thermal dilation of the water in the heating systems and against water hammer.They work as hydraulic flywheel too. Being designed for potable water, they contain a membrane with certification of potability.
For further information about the correct dimensioning of the products, please visit the web site www.varem.com
HOT POTABLE WATER MULTIFUNCTION LINE
LINEA TERMOSANITARIO MULTIFUNZIONE
11
GENERAL CATALOGUECATALOGO GENERALE
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
CATALOGO GENERALE - GENERAL CATALOGUE
HOT POTABLE WATER MULTIFUNCTION LINELINEA TERMOSANITARIO MULTIFUNZIONE
12
SCHEMA DI UTILIZZO PER ACQUA CALDA SANITARIA E ANTI COLPO D’ARIETE SCHEME OF UTILIZATION FOR DOMESTIC HOT WATER AND AS WATER HAMMER ARRESTER
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Modello Capacità Raccordo Membrana Dimensioni Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Connection Membrane Dimensions Packaging Qty/pallet
lt inch mm m3 n.
LC 0.16 R1016828 R1016823S4000000 0.16 15 3.5 1/2’ FIX 65x105 0.035 Min.10 pcsLC 2 R1002828 R1002823S4000000 2 10 3.5 1/2’ FIX 125x237 0.050 576LC 5 R1005228 R1005223S4000000 5 8 3.5 3/4’ FIX 160x325 0.020 210LC 8 R1008228 R1008223S4000000 8 8 3.5 3/4’ FIX 200x337 0.031 144
LC 12 R1012228 R1012223S4000000 12 8 3.5 3/4’ FIX 270x300 0.024 72LC 18 R1018228 R1018223S4000000 18 8 3.5 3/4’ FIX 270x422 0.034 56LC 25 R1025228 R1025223S4000000 25 8 3.5 3/4’ FIX 351x338 0.044 63LC 40 R1040228 R1040223S4000000 40 8 3.5 3/4’ FIX 320x560 0.080 36
Codice standard - Standard Code
EXTR
AVAR
EM L
C CE
bar
Pressione max
Max. pressure
Utilizzo: impianti di riscaldamento, bollitori, elettropompe, acqua calda sanitaria, anti colpo d’ariete
Use: heating systems, boilers, pumps, hot potable water, water hammer arresting
Modello Capacità Raccordo Imballo Qtà/palletItem Vecchio - Old Nuovo - New Capacity Connection Packaging Qty/pallet
lt inch m3 n.
LC O 2 C7002828 C7002823S4000000 2 1/2’ 82x120x325 -LC O 3 C7003828 C7003823S4000000 3 1/2’ 82x120x475 -LC O 4 C7004828G C7004823S4G00000 4 1/2’ 82x120x652 -
LC L 2.5 C4025828 C4025823S4000000 2.5 1/2’ 125x291 0.008 -LC L 3 C4003828 C4003823S4000000 3 1/2’ 125x348 0.010 -LC L 4 C4004828 C4004823S4000000 4 1/2’ 125x427 0.010 -LC L 6 C4006828 C4006823S4000000 6 1/2’ 162x360 0.012 -
88
1010108
Codice standard - Standard Code
Utilizzo: acqua calda e fredda sanitaria - Use: hot and cold potable water
EXTR
AVAR
EM L
C Pressione max DimensioniMax. pressure Dimensions
bar mm
Modello Capacità Raccordo Membrana Dimensioni Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Connection Membrane Dimensions Packaging Qty/pallet
lt inch mm m3 n.
LC V 60 UC060367 UC060362S4000000 60 10 2 1’ REP 380x671 0.112 20LC V 80 UC080367 UC080362S4000000 80 10 2 1’ REP 450x650 0.135 20
LC V 100 UC100367 UC100362S4000000 100 10 2 1’ REP 450x731 0.173 15LC V 150 UC150467 UC150462S4000000 150 10 2 1’1/2 REP 554x808 0.265 8LC V 200 UC200467 UC200462S4000000 200 10 2 1’1/2 REP 554x988 0.324 8LC V 250 UC250467 UC250462S4000000 250 10 2 1’1/2 REP 624x1006 0.423 6LC V 300 UC300467 UC300462S4000000 300 10 2 1’1/2 REP 624x1160 0.481 6LC V 400 UC400467 UC400462S4000000 400 10 2 1’1/2 REP 624x1520 0.771 6
Codice standard - Standard Code
MAXI
VARE
M LC
CE Utilizzo: impianti di riscaldamento, bollitori, elettropompe, acqua calda sanitaria, anti colpo d’ariete
Use: heating systems, boilers, pumps, hot potable water, water hammer arresting
Pressione max
Max. pressure
bar
CATALOGO GENERALE - GENERAL CATALOGUE
• Flangia in acciaio inox• Colore bianco (blu oltre 60 lt)• Marchio CE (non applicabile fino a 5 lt)
• Stainless steel steel frange• White color (blue over 60 lt)• CE Mark (not applyable up to 5 lt)
MULTIFUNCTION EXPANSION VESSELS
HOT POTABLE WATER MULTIFUNCTION LINELINEA TERMOSANITARIO MULTIFUNZIONE
VASI DI ESPANSIONE MULTIFUNZIONE
13
Membrana sostituibile, flangia avvitata Replaceable membrane, screwed flangePressione di precarica 2 bar Pre charge pressure 2 bar .
Membrana fissa, flangia aggraffata Fixed membrane, crimped flangePressione di precarica 3,5 bar Pre charge pressure 3,5 bar
-10 +99 °C
-10 +99 °C
-10 +99 °C
Membrana fissa, flangia aggraffata Fixed membrane, crimped flangePressione di precarica 3,5 bar Pre charge pressure 3,5 bar
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
CATALOGO GENERALE - GENERAL CATALOGUE
Le autoclavi della linea Varem LS sono serbatoi a pressione che costituiscono un elemento fondamentale per la durata e l’efficienza dei sistemi di distribuzione e pompaggio dell’acqua potabile.Le autoclavi accumulano l’acqua in pressione degli impianti di pompaggio fungendo da volano idrodinamico nelle fasi di prelievo.Questa funzione riduce la frequenza di riaccensione del gruppo di pompaggio. Un pressostato regola la pressione all’interno del circuito e attiva la pompa solo quando l’acqua del serbatoio ha una pressione inferiore alla minima richiesta. Alla riaccensione, la pompa riempie nuovamente il serbatoio di accumulo.
Per ulteriori informazioni sul corretto dimensionamento dei prodotti, visitare il sitowww.varem.com
The pressure tanks of Varem LS line are a basic element for long lasting and efficiency of a potable water distribution system.The pressure tank stores the pressurized water of the booster systems working as hydrodynamic flywheel during drawing.This application reduces the frequency of switching on of the booster system. A pressure switch adjusts the internal pressure and activates the pump only if the water pressure in the tank is lower than the minimum required. Switching on,the pump loads the storage tank again.
For further information about the correct dimensioning of the products, please visit the web site www.varem.com
WATER LINE
LINEA SOLLEVAMENTO
15
GENERAL CATALOGUECATALOGO GENERALE
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
CATALOGO GENERALE - GENERAL CATALOGUE
WATER LINELINEA SOLLEVAMENTO
16
SCHEMA DI GRUPPO DI POMPAGGIO CON AUTOCLAVE SCHEME OF A BOOSTER SYSTEM WITH PRESSURE TANK
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Modello Capacità Raccordo Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Connection Packaging Qty/palletlt inch m3 n.
LS 5 S2005361 S2005361CS000000 5 1’ 160x332 0.010 210LS 8* S2008361 S2008361CS000000 8 1’ 200x348 0.015 144
LS 12* S2012361 S2012361CS000000 12 1’ 270x308 0.024 72LS 19* S2019361 S2019361CS000000 19 1’ 270x421 0.031 63LS 20 S2020361 S2020361CS000000 20 1’ 250x500 0.038 56
S2024361 S2024361CS000000
E10243D1 E10243D1CS000000
LS 25* S2025361 S2025361CS000000 25 1’ 290x480 0.041 63LS 40* S2040361 S2040361CS000000 40 1’ 320x587 0.066 36
LS 24* 24 540.045351x3481’8
88
888
Max. pressurebar
108
Codice standard - Standard Code
INTE
RVAR
EM L
S CE
Dimensioni
Dimensionsmm
Pressione max
Modello Capacità Raccordo Imballo Qtà/pallet
Item Vecchio - Old Nuovo - New Capacity Connection Packaging Qty/palletlt inch m3 n.
LS V 50 S3050361 US050361CS000000 50 1’ 379x759 0.126 15LS V 60 US060361 US060361CS000000 60 1’ 379x815 0.131 15LS V 80 US080361 US080361CS000000 80 1’ 450x789 0.170 15LS V 100 US100361 US100361CS000000 100 1’ 450x910 0.200 15LS V 150 US150461 US150461CS000000 150 1’1/2 554x1020 0.340 8LS V 200 US200461 US200461CS000000 200 1’1/2 554x1213 0.407 8LS V 300 US300461 US300461CS000000 300 1’1/2 624x1373 0.596 6LS V 500 US500461 US500461CS000000 500 1’1/2 775x1460 1.300 1
LS V 750** US750461 US750461CS000000 750 1’1/2 786x1925 2.000 1LS V 1000** USN10H61 USN10H61CS000000 1000 2’ 900x1923 2.200 1LS V 2000** USN20H61 USN20H61CS000000 2000 2’ 1280x2241 2.500 1
Codice standard - Standard Code
mm
MAX
IVAR
EM L
S CE
Dimensioni
Max. pressure Dimensionsbar
101010
Pressione max
1010
101010101010
CATALOGO GENERALE - GENERAL CATALOGUE
• Vasi idrici multifunzione verticali• Membrana sostituibile• Flangia in acciaio zincato
o verniciato• Colore rosso• Pressione di precarica 2 bar
• Vertical multifunction water tanks• Replaceable membrane• Available with galvanised
or painted flange• Red color• Pre charge pressure 2 bar
Available s/s flange and blue upon request* Available version in white color, s/s flange and 3,5 bar pre charge pressure* connection ¾ available upon request
WATER LINE
WATER LINE VERTICAL
LINEA SOLLEVAMENTO
LINEA SOLLEVAMENTO VERTICALI
Disponibile flangia inox e colore blu su richiesta* Disponibile versione in colore bianco, flangia inox e precarica 3,5 bar* raccordo ¾’ disponibile su richiesta
** Disponibile versione senza marchio CE, anche con capacità 1500 lt e 3000 lt.
** Available version not CE marked also with capacity 1500 lt and 3000 lt.
17
-10 +99 °C
-10 +99 °C
Available stainless steel flange and blue upon request
Disponibile flangia inox e colore blu su richiesta
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Modello Capacità Imballo Qtà/palletItem Vecchio - Old Nuovo - New Capacity Packaging Qty/pallet
lt m3 n.
LS P 8 S5008361 S5008361CS000000 8 160x332 0.015 144LS P 20 S5020361 S5020361CS000000 20 250x509 0.038 56
LS PV 50 S5050361 S5050361CS000000 50 379x759 0.128 15LS PV 80 S5080361 S5080361CS000000 80 453x789 0.170 15
LS PV 100 S5100361 S5100361CS000000 100 453x915 0.200 15LS PV 200 S5200461 S5200461CS000000 200 556x1218 0.407 8
LS PV 300** S5300461CE S5300461CS000000 300 626x1373 0.596 6LS PV 500** S5500461CE S5500461CS000000 500 777x1457 1.300 1LS PV 750*** S5750461 S5750461CS000000 750 786x1925 2.000 1
LS PV 1000*** S5N10H61 S5N10H61CS000000 1000 900x1923 2.200 1
PLUS
VARE
M
161’
Max. pressure
16
16
16
1612141616
bar mm
1’1/21’1/2
1’1’
2’1’1/21’1/2
1’
16
Codice standard - Standard Code
1’
ALTA PRESSIONE - HIGH PRESSURE
Connection DimensionsPressione max Raccordo Dimensioni
Modello Capacità Imballo Qtà/palletItem Vecchio - Old Nuovo - New Capacity Packaging Qty/pallet
lt m3 n.
LS H 19* S2019361BP S2019361CS000000 19 270x421 0.031 63LS H 20* S2020361BP S2020361CS000000 20 250x500 0.038 56LS H 40 S3041361 US041361CS000000 40 320x587 0.066 36LS H 50 S3051361 US051361CS000000 50 379x759 0.126 15LS H 60 US061361 US061361CS000000 60 379x815 0.131 20LS H 80 US081361 US081361CS000000 80 450x789 0.170 15LS H 100 US101361 US101361CS000000 100 450x910 0.200 15LS H 200 US201461 US201461CS000000 200 554x1213 0.407 8LS H 300 US301461 US301461CS000000 300 624x1373 0.596 6
Codice standard - Standard Code
ORIZZONTALI - HORIZONTAL
1’
barDimensions
mm
INTE
RVAR
EMMA
XIVA
REM
LS C
E
RaccordoConnection
DimensioniPressione maxMax. pressure
1’1/2
1’1/2
1’
1’
1’
1’
10
8
10
10
10
1’
1’
10
10
10
10
CATALOGO GENERALE - GENERAL CATALOGUE
WATER LINELINEA SOLLEVAMENTO
LINEA SOLLEVAMENTO ORIZZONTALI / ALTA PRESSIONE
WATER LINE HORIZONTAL / HIGH PRESSURE
• Vasi idrici multifunzione orizzontali• Membrana sostituibile• Flangia in acciaio zincato o verniciato• Colore rosso • Pressione di precarica 2 bar
• Horizontal multifunction water tanks• Replaceable membrane• Available with galvanised or painted flange• Red color • Pre charge pressure 2 bar
22 bar su richiesta
* Disponibile versione con flangia inox e Precarica 3,5 bar* fino a 40 lt raccordo ¾’ su richiesta
** 16 bar disponibili non marchiati ce
*** Non marchiati CE
22 bar upon request
* Available version with s/s flange and 3,5 bar pre charge pressure* up to 40 lt connection ¾’ upon request
** 16 bar available not marked ce
*** Not marked CE
18
Disponibile versione con flangia inox Available version with s/s flange
-10 +99 °C
-10 +99 °C
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Modello Codice stand. Raccordo Imballo Qtà/palletItem Std. Code Vecchio - Old Nuovo - New Connection Packaging Qty/pallet
lt inch m3 n.
LS ZV 100 SZ100361 V2H20360S40BP000 100 1’ 450x910 0.200 15LS ZV 200 SZ200461 V2051360S4000000 200 1’1/2 554x1213 0.407 8LS ZV 300 SZ300461 V2101360S4000000 300 1’1/2 624x1373 0.596 6LS ZV 500 SZ500461 V2201460S4000000 500 1’1/2 775x1460 1.300 1
Codice standard - Standard Code
ZINC
VARE
M LS
CE
1010
VERTICALI ZINCATI - GALVANIZED VERTICAL
Pressione max DimensioniMax. pressure Dimensions
bar mm
1010
Modello Codice stand. Raccordo Imballo Qtà/palletItem Std. Code Vecchio - Old Nuovo - New Connection Packaging Qty/pallet
lt inch m3 n.
LS XH 20 V2020360BP V2H20360S40BP000 20 1’ 275x492 0.040 56LS XH 50 V2051360 V2051360S4000000 50 1’ 450x545 0.104 25LS XH 100 V2101360 V2101360S4000000 100 1’ 525x745 0.200 15LS XH 200 V2201460 V2201460S4000000 200 1’1/2 610x1095 0.400 8LS XH 300 V2301460 V2301460S4000000 300 1’1/2 710x1155 0.600 6
Codice standard - Standard Code
ORIZZONTALI INOX - STAINLESS STEEL HORIZONTAL
Pressione max DimensioniMax. pressure Dimensions
bar mm
INOX
VARE
M LS
CE
8
8888
Modello Codice stand. Raccordo Imballo Qtà/palletItem Std. Code Vecchio - Old Nuovo - New Connection Packaging Qty/pallet
lt inch m3 n.
LS X 20 V2020360 V2020360S4000000 20 1’ 260x492 0.040 56LS XV 50 V2050360 V2050360S4000000 50 1’ 365x863 0.131 15LS XV 100 V2100360 V2100360S4000000 100 1’ 480x925 0.240 15LS XV 200 V2200460 V2200460S4000000 200 1’1/2 540x1280 0.400 8LS XV 300 V2300460 V2300460S4000000 300 1’1/2 635x1385 0.600 6LS XV 500 V2500460 V2500460S4000000 500 1’1/2 780x1450 1.300 1
Codice standard - Standard Code DimensioniDimensions
mm VERTICALI INOX - STAINLESS STEEL VERTICAL
Max. pressurebar
Pressione max
INOX
VARE
M LS
CE
888888
• Vasi inox AISI304 con membrana intercambiabile
• Vasi zincati con membrana intercambiabile
• Pressione di precarica 2 bar
• Stainless steel tanks AISI304 with replaceable membrane
• Galvanized tanks with replaceable membrane
• Pre charge pressure 2 bar
WATER LINES/STEEL - GALVANIZED
LINEA SOLLEVAMENTO INOX - ZINCATI
CATALOGO GENERALE - GENERAL CATALOGUE
WATER LINELINEA SOLLEVAMENTO
19
-10 +99 °C
-10 +99 °C
-10 +99 °C
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Modello Capacità Max Press. Raccordo Imballo Qtà/palletItem Vecchio - Old Nuovo - New Capacity Connection Packaging Qty/pallet
[lt] [bar] [inch] [m3] n.
LS U 5 S200536C S200536CS4000000 5 10 1” 160x332 0.01 210LS U 8 S200836C S200836CS4000000 8 10 1” 200x348 0.015 144
LS U 12 S201236C S201236CS4000000 12 10 1” 270x308 0.024 72LS U 19 S201936C S201936CS4000000 19 10 1” 270x421 0.031 63LS U 24 S202436C S202436CS4000000 24 10 1” 351x347 0.045 54LS U 25 S202536C S202536CS4000000 25 10 1” 290x480 0.041 63LS U 40 S204036C S204036CS4000000 40 10 1” 320x587 0.066 36
LS UV 50 S305036C US05036CS4000000 50 10 1” 379x759 0.126 15LS UV 60 US06036C US06036CS4000000 60 10 1” 379x815 0.131 15LS UV 80 US08036C US08036CS4000000 80 10 1” 450x789 0.17 15
LS UV 100 US10036C US10036CS4000000 100 10 1” 450x910 0.2 15LS UV 150 US15046C US15046CS4000000 150 10 1”½ 554x1020 0.34 8LS UV 200 US20046C US20046CS4000000 200 10 1”½ 554x1213 0.407 8LS UV 300 US30046C US30046CS4000000 300 10 1”½ 624x1373 0.596 6LS UV 500 US50046C US50046CS4000000 500 10 1”½ 775x1460 0.9 1
LS UH 20 S202036CBP S2H2036CS40BP000 19 10 1” 300x418 0.038 56LS UH 40 S304136C US04136CS4000000 40 10 1” 352x590 0.071 36LS UH 50 S305136C US05136CS4000000 50 10 1” 412x601 0.104 25LS UH 60 US06136C US08036CS4000000 60 10 1” 412x649 0.114 20
LS UH 100 US10136C US10136CS4000000 100 10 1” 484x756 0.183 15
ULTR
AVAR
EM
DimensioniDimensions
[mm]in line
vertical
horizontal
Codice standard - Standard Code
CATALOGO GENERALE - GENERAL CATALOGUE
WATER LINELINEA SOLLEVAMENTO
20
• Membrana sostituibile, 99°C• Controflangia inox• pre carica 2 bar• Colore bianco poliestere ad alta resistenza
• Replaceable membrane 99°C• Stainless steel coverflange• pre charge pressure 2 bar• White color high resistance polyester
WATER LINEULTRAVAREM
LINEA SOLLEVAMENTOULTRAVAREM
GARANZIA 3 ANNI3 YEARS WARRANTY
-10 +99 °C
Consigliati per condizioni di utilizzo particolarmente aggressive
Recommended for particularly aggressive operating conditions
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
THE CE MARKINGIL MARCHIO CE
CATALOGO GENERALE - GENERAL CATALOGUE36
Il marchio CE per i recipienti a pressione nasce con la direttiva europea 97/23/CE PED. La direttiva ha lo scopo di rendere agevole la circolazione dei prodotti all’interno dell’Unione Europea uniformandone la regolamentazione. Ogni prodotto che soddisfa i requisiti della direttiva PED ha apposto il marchio CE. La PED suddivide i recipienti a pressione in categorie a seconda del fluido contenuto e in base al prodotto dei valori di volume (V) e pressione (PS). Senza marchio CE (PS x V < 50) Non rientrano nella marcatura CE i prodotti con PS x V minore di 50. Per questi prodotti il fabbricante si rende garante della qualità di costruzione e risponde in proprio di eventuali danni. Rientrano in questa tipologia molti prodotti Varem di piccola dimensione, ad esempio: Extravarem LR 8 l 8 l 5 bar PS x V = 40
Intervarem 5 l 5 l 8 bar PS x V = 40
Categoria I (50 < PS x V < 200) Rientrano in questa categoria i recipienti con prodotto PS x V maggiore di 50 e minore o uguale a 200. Per questi recipienti il fabbricante garantisce la qualità di progettazione, costruzione e verifica finale e può porre il marchio CE. Rientrano in questa categoria molti prodotti Varem, ad esempio: Intervarem 20 l 20 l 10 bar PS x V = 200
Extravarem LR 40 l 40 l 5 bar PS x V = 200
Categoria II (200 < PS x V < 1000) Rientrano in questa categoria i recipienti con prodotto PS x V maggiore di 200 e minore o uguale a 1000. Per questi recipienti il fabbricante garantisce la qualità di progettazione, costruzione e verifica finale sotto la sorveglianza di un ente notificato a sua scelta, che lo autorizza a porre il marchio CE. Rientrano in questa categoria molti prodotti Varem, ad esempio: Maxivarem LR 60 l 60 l 6 bar PS x V = 360
Maxivarem LS 100 l 100 l 10 bar PS x V = 1000
Categoria III (1000 < PS x V < 3000) Rientrano in questa categoria i recipienti con prodotto PS x V maggiore di 1000 e minore o uguale a 3000. Per questi recipienti il fabbricante garantisce la qualità di progettazione e costruzione. La verifica finale viene sorvegliata da un ente notificato a sua scelta, che lo autorizza a porre il marchio CE. Rientrano in questa categoria molti prodotti Varem, ad esempio: Maxivarem LR 500 l 500 l 6 bar PS x V = 3000
Maxivarem LS 300 l 300 l 10 bar PS x V = 3000
Categoria IV (PS x V > 3000) Rientrano in questa categoria i recipienti con prodotto PS x V maggiore di 3000. Per questi recipienti il fabbricante garantisce la qualità di progettazione e costruzione. La verifica finale viene sorvegliata da un ente notificato a sua scelta, che lo autorizza a porre il marchio CE. Rientrano in questa categoria i prodotti Varem di maggiori dimensioni, ad esempio: Maxivarem LS 500 l 500 l 10 bar PS x V = 5000
Maxivarem LS 1000 l 1000 l 10 bar PS x V = 10000
L’ente di sorveglianza notificato alla Commissione dell’Unione Europea sottopone il fabbricante a differenti livelli di controllo a seconda della categoria del recipiente per cui è richiesta la marcatura CE. Per le categorie con valori superiori i controlli sono più estesi. Le modalità vengono scelte dal fabbricante.
The CE marking for pressurized tanks was born with the 97/23/EC PED directive. The purpose of the directive is to facilitate the circulation of products within the EU as an unique technical standard. The CE marking is affixed to all products that comply with the PED requirements. The PED divides the pressurized tanks into categories according to the fluid contained and to the product of volume (V) and pressure (PS). Without CE marking (PS x V < 50) If the product of PS x V is less than or equal to 50 the manufacturer ensures the quality of construction and is solely responsible for any damages and the CE marking is not affixed. Many smaller Varem products are included in this category, such as: Extravarem LR 5 lt. 8 lt. 5 bar PS x V = 40
Intervarem 5 lt. 5 lt. 8 bar PS x V = 40
Category I (50 < PS x V < 200) This category includes tanks with product of PS x V greater than 50 and less than or equal to 200. The manufacturer ensures the quality of design, manufacturing and final inspection of these vessels and may affix the CE marking. Many Varem products are included in this category, such as: Intervarem 20 l 20 l 10 bar PS x V = 200
Extravarem LR 40 l 40 l 5 bar PS x V = 200
Category II (200 < PS x V < 1000) This category includes tanks with product of PS x V greater than 200 and less than or equal to 1000. The manufacturer ensures the quality of design and manufacturing. A notified body of his choice monitor the final inspection and authorizes him to affix the CE marking. Many Varem products are included in this category, such as: Maxivarem LR 60 lt. 60 lt. 6 bar PS x V = 360
Maxivarem LS 100 lt. 100 lt. 10 bar PS x V = 1000
Category III (1000 < PS x V < 3000) This category includes tanks with product of PS x V greater than 1000 and less than or equal to 3000. The manufacturer ensures the quality of design and manufacturing. A notified body of his choice monitors the final inspection and authorizes him to affix the CE marking. Many Varem products are included in this category, such as: Maxivarem LR 500 lt. 500 lt. 6 bar PS x V = 3000
Maxivarem LS 300 lt. 300 lt. 10 bar PS x V = 3000
Category IV (PS x V > 3000) This category includes tanks with product of PS x V greater than 3000. The manufacturer ensures the quality of design and manufacturing. A notified body of his choice monitors the final inspection and authorizes him to affix the CE marking. The larger Varem products are included in this category, such as: Maxivarem LS 500 lt. 500 lt. 10 bar PS x V = 5000
Maxivarem LS 1000 lt. 1000 lt. 10 bar PS x V = 10000
The monitoring body, which must be notified by the UE Commission, subjects the manufacturer to different levels of control according to the category of vessel for which CE marking is requested. For high categories the tests are more extensive although the manufacturer may choose from different procedures and therefore different controls to attain the same results. Further than the CE PED and ISO9001:2008 Varem obtained the main
international certifications including:
Oltre alla certificazione CE PED 3 ISO9001:2008 Varem ha ottenuto le principali certificazioni internazionali tra cui:
Further than the CE PED and ISO9001:2008 Varem obtained the main international certifications including:
Il marchio CE per i recipienti a pressione nasce con la direttiva europea 97/23/CE PED. La direttiva ha lo scopo di rendere agevole la circolazione dei prodotti all’interno dell’Unione Europea uniformandone la regolamentazione. Ogni prodotto che soddisfa i requisiti della direttiva PED ha apposto il marchio CE. La PED suddivide i recipienti a pressione in categorie a seconda del fluido contenuto e in base al prodotto dei valori di volume (V) e pressione (PS). Senza marchio CE (PS x V < 50) Non rientrano nella marcatura CE i prodotti con PS x V minore di 50. Per questi prodotti il fabbricante si rende garante della qualità di costruzione e risponde in proprio di eventuali danni. Rientrano in questa tipologia molti prodotti Varem di piccola dimensione, ad esempio: Extravarem LR 8 l 8 l 5 bar PS x V = 40
Intervarem 5 l 5 l 8 bar PS x V = 40
Categoria I (50 < PS x V < 200) Rientrano in questa categoria i recipienti con prodotto PS x V maggiore di 50 e minore o uguale a 200. Per questi recipienti il fabbricante garantisce la qualità di progettazione, costruzione e verifica finale e può porre il marchio CE. Rientrano in questa categoria molti prodotti Varem, ad esempio: Intervarem 20 l 20 l 10 bar PS x V = 200
Extravarem LR 40 l 40 l 5 bar PS x V = 200
Categoria II (200 < PS x V < 1000) Rientrano in questa categoria i recipienti con prodotto PS x V maggiore di 200 e minore o uguale a 1000. Per questi recipienti il fabbricante garantisce la qualità di progettazione, costruzione e verifica finale sotto la sorveglianza di un ente notificato a sua scelta, che lo autorizza a porre il marchio CE. Rientrano in questa categoria molti prodotti Varem, ad esempio: Maxivarem LR 60 l 60 l 6 bar PS x V = 360
Maxivarem LS 100 l 100 l 10 bar PS x V = 1000
Categoria III (1000 < PS x V < 3000) Rientrano in questa categoria i recipienti con prodotto PS x V maggiore di 1000 e minore o uguale a 3000. Per questi recipienti il fabbricante garantisce la qualità di progettazione e costruzione. La verifica finale viene sorvegliata da un ente notificato a sua scelta, che lo autorizza a porre il marchio CE. Rientrano in questa categoria molti prodotti Varem, ad esempio: Maxivarem LR 500 l 500 l 6 bar PS x V = 3000
Maxivarem LS 300 l 300 l 10 bar PS x V = 3000
Categoria IV (PS x V > 3000) Rientrano in questa categoria i recipienti con prodotto PS x V maggiore di 3000. Per questi recipienti il fabbricante garantisce la qualità di progettazione e costruzione. La verifica finale viene sorvegliata da un ente notificato a sua scelta, che lo autorizza a porre il marchio CE. Rientrano in questa categoria i prodotti Varem di maggiori dimensioni, ad esempio: Maxivarem LS 500 l 500 l 10 bar PS x V = 5000
Maxivarem LS 1000 l 1000 l 10 bar PS x V = 10000
L’ente di sorveglianza notificato alla Commissione dell’Unione Europea sottopone il fabbricante a differenti livelli di controllo a seconda della categoria del recipiente per cui è richiesta la marcatura CE. Per le categorie con valori superiori i controlli sono più estesi. Le modalità vengono scelte dal fabbricante. oltre alla certificazione CE PED 3 ISO9001:2008 Varem ha ottenuto le principali certificazioni internazionali tra cui:
The CE marking for pressurized tanks was born with the 97/23/EC PED directive. The purpose of the directive is to facilitate the circulation of products within the EU as an unique technical standard. The CE marking is affixed to all products that comply with the PED requirements. The PED divides the pressurized tanks into categories according to the fluid contained and to the product of volume (V) and pressure (PS). Without CE marking (PS x V < 50) If the product of PS x V is less than or equal to 50 the manufacturer ensures the quality of construction and is solely responsible for any damages and the CE marking is not affixed. Many smaller Varem products are included in this category, such as: Extravarem LR 5 lt. 8 lt. 5 bar PS x V = 40
Intervarem 5 lt. 5 lt. 8 bar PS x V = 40
Category I (50 < PS x V < 200) This category includes tanks with product of PS x V greater than 50 and less than or equal to 200. The manufacturer ensures the quality of design, manufacturing and final inspection of these vessels and may affix the CE marking. Many Varem products are included in this category, such as: Intervarem 20 l 20 l 10 bar PS x V = 200
Extravarem LR 40 l 40 l 5 bar PS x V = 200
Category II (200 < PS x V < 1000) This category includes tanks with product of PS x V greater than 200 and less than or equal to 1000. The manufacturer ensures the quality of design and manufacturing. A notified body of his choice monitor the final inspection and authorizes him to affix the CE marking. Many Varem products are included in this category, such as: Maxivarem LR 60 lt. 60 lt. 6 bar PS x V = 360
Maxivarem LS 100 lt. 100 lt. 10 bar PS x V = 1000
Category III (1000 < PS x V < 3000) This category includes tanks with product of PS x V greater than 1000 and less than or equal to 3000. The manufacturer ensures the quality of design and manufacturing. A notified body of his choice monitors the final inspection and authorizes him to affix the CE marking. Many Varem products are included in this category, such as: Maxivarem LR 500 lt. 500 lt. 6 bar PS x V = 3000
Maxivarem LS 300 lt. 300 lt. 10 bar PS x V = 3000
Category IV (PS x V > 3000) This category includes tanks with product of PS x V greater than 3000. The manufacturer ensures the quality of design and manufacturing. A notified body of his choice monitors the final inspection and authorizes him to affix the CE marking. The larger Varem products are included in this category, such as: Maxivarem LS 500 lt. 500 lt. 10 bar PS x V = 5000
Maxivarem LS 1000 lt. 1000 lt. 10 bar PS x V = 10000
The monitoring body, which must be notified by the UE Commission, subjects the manufacturer to different levels of control according to the category of vessel for which CE marking is requested. For high categories the tests are more extensive although the manufacturer may choose from different procedures and therefore different controls to attain the same results. Further than the CE PED and ISO9001:2008 Varem obtained the main
international certifications including:
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Varem offre una completa gamma di ricambi per tutti i prodotti delle gamme offerte, un set di accessori a corredo delle gamme di vasi ad espansione per riscaldamen-to, multifunzione e solleva-mento ed alcuni componenti a completamento della serie Thermovarem .
Varem offers a complete range of spare parts for all the produced items, a set of ac-cessories to complement the range of espansion vessels for heating, multifunction and water line, together with seve-ral components to complete the Thermovarem series.
CATALOGO GENERALE - GENERAL CATALOGUE 37
SPARE PARTS AND ACCESSORIES
RICAMBISTICA E ACCESSORI
GENERAL CATALOGUECATALOGO GENERALE
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Vecchio - Old Nuovo - New Vecchio - Old Nuovo - New Vecchio - Old Nuovo - New Vecchio - Old Nuovo - New5 V42008 MB008S2P00000000 V46008 MB008S6S00000000
8 V42008 MB008S2P00000000 V46008 MB008S6S00000000
12 V42012 MB012S2P00000000 V46012 MB012S6S00000000
19 V42019 MB019S2P00000000 V46019 MB019S6S00000000 V48024 MB024S8P00000000
19 Osmovarem V42019OS MB019S2O00000000
20 V42019 MB019S2P00000000
24 V42019 MB019S2P00000000 V48024 MB024S8P00000000
25 V42019 MB019S2P00000000 V46019 MB019S6S00000000
40 V42040 MB040S2P00000000 V46040 MB040S6S00000000
50 V42060 MB060S2P00000000
60 V42060 MB060S2P00000000 V44060 MB060S4H00000000 V46060 MB060S6S00000000 V48060 MB060S8P00000000
80 V42080 MB080S2P00000000 V44080 MB080S4H00000000 V46080 MB080S6S00000000 V48080 MB080S8P00000000
100 V42080F MB080F2P00000000 V44080 MB080S4H00000000 V46080 MB080S6S00000000 V48080 MB080S8P00000000
100 Inoxvarem V42080 MB080S2P00000000
150 V42150 MB150F2P00000000 V44150 MB150S4H00000000 V46150 MB150S6S00000000 V48150 MB150S8P00000000
200 V42200 MB200F2P00000000 V44150 MB150S4H00000000 V46200 MB200S6S00000000 V48200 MB200S8P00000000
250 V44200 MB200S4H00000000 V48200 MB200S8P00000000
300 V42300 MB300F2P00000000 V44200 MB200S4H00000000 V46300 MB300S6S00000000 V48300 MB300S8P00000000
400 V44300 MB300S4H00000000 V48300 MB300S8P00000000
500 V42500 MB500F2P00000000 V44500 MB500S4H00000000 V46500 MB500S6S00000000
700 V44500 MB500S4H00000000
750 V421000 MBN10F2P00000000
1000 V421000 MBN10F2P00000000
1500 V421000 MBN10F2P00000000
2000 V421000 MBN10F2P00000000
Mem
bran
e di
rica
mbi
o –
Spa
re m
embr
anes
Capacità vasi
Tank capacity
MAXIVAREM LR
MAXIVAREM LS
ZINCVAREM
Modello vasi – Tank model
Codice standard - Standard Code Codice standard - Standard Code Codice standard - Standard Code Codice standard - Standard CodeULTRAVAREM
OSMOVAREMINOXVAREMPLUSVAREM
INTERVAREM LS
SOLARVAREMMAXIVAREM LC
IDROVAREM
Le membrane per i Solarvarem possono resistere fino a 130° per brevi periodi in soluzioni di acqua e glicole.
Le membrane per la linea sollevamento sono certificate per la potabilità.
Le membrane sono formulate in gomma sintetica. The membranes are made on synthetic rubber.
The membranes for Solarvarem can resist up to 130° for short periods with solutions of water and glycol.
The membranes for water booster system line are potable water-proof certified.
Modello vaso Raccordo
Tank model Connector
Vecchio - Old Nuovo - New Vecchio - Old Nuovo - New Vecchio - Old Nuovo - New Vecchio - Old Nuovo - New5-12 lt. 3/4" V50008 SPCFL512ZN200000 - - V52008 SPCFL512S4200000 - -5-12 lt. 1” V50009 SPCFL512ZN300000 - - V52009 SPCFL512S4300000 - -
19-100 lt. 3/4” V50024 SPCFL191ZN200H28 - - V52024 SPCFL191S4200000 - -19-100 lt. 1” V50025 SPCFL191ZN300000 - - V52025 SPCFL191S4300000 V54025 SPCFL191S630000019 Osmov 1/4” - - - - V52019 SPCFL019S4O00000 - -200-300 lt. 1” 1/2 - - V50300 SPCFL230ZN4V0000 V52300 SPCFL230S4400000 V54300 SPCFL230S6400000500-750 lt. 1” 1/2 - - V50500 SPCFL575VE400000 - - - -
1000-2000 lt. 2” - - V501000 SPCFLN12VEHE0000 - - - -500 lt.
Plusvarem1” 1/2 - - V50500H SPCFL575VE4P0000 - - - -
750 lt. Plusv/CE 1” 1/2 - - V50750H SPCFL750VE4P0000 - - - -
1000 lt. Plusv/CE 2” - - V50N10H SPCFLN12VEHC0000 - - - -
1000-2000 lt. 2” - - - - V52N10B SPCFLN12S4HC0000 V54N10B SPCFLN12S6HC0000500-750 lt. 1/2" - - V50500A SPDIS575VE000000 - - - -
1000-2000 lt. 2” - - V50N10A SPDISN12VE0C0000 - - - -
250-300-400 lt. Maxivarem
1” 1/2 - - V50300R SPCFL254ZN400000 V52300R SPCFL230S44R0000 - -
500-600-700 lt. Maxivarem 1” 1/2 - - V50500R SPCFL500VE400000 - - - -
A ttacco superio re 100 lt. 1/2" V50401 SPATT100ZN000000 V50402 SPATT100S4000000 V50403 SPATT100S6000000
T o p f lange
150-300 lt. HOR
1/2" V50301 SPATT153ZN0H0000 - - V52301 SPATT153S40H0000 V54301 SPATT153S6000000
150-300 lt. VRT
1/2” V50310 SPATT153ZN0V0000 V52310 SPATT153S40V0000 V54310 SPATT153S60V0000
500-750-1000-1500 lt.
1/2" V50305 SPATT515ZN000000 - - V52501 SPATT510S4000000 V54501 SPATT752S6000000
Codice standard - Standard Code Codice standard - Standard Code Codice standard - Standard Code Codice standard - Standard CodeStainless steel A ISI 316Stainl. steel A ISI 304C o ated steelGalvanized steel
A cciaio ino x A ISI 316A cciaio ino x A ISI 304
SPCFL152S44C0000
SPATTN20S4000000
SPTAP120S4000000
SPCFL575S6400000
-
-
--V52880
Rica
mbi
– S
pare
par
ts
1/ 2" nut with gasket100-2000 lt. 2” V50880 SPTAP120ZN000000
V52N20- -
D ado 1/ 2" co n guarnizio ne - -
V52200R
A ttacco sup. membrana
M embr. upper co nnect .2000 lt. 1/2" V50N20 SPATTN20VE000000 -
150-200 lt. Maxivarem 1” 1/2 - - V50200R
V52500B
C o ntro f langia piatta fo rata
C o ated disk co verf lange
C o ntro f langia co n tubo dif fuso re
D iffuser tube co verf lange
SPCFL152ZN400000 -
- - - V54500BD isco co ntro f langia ino xF lange disk SPCFL575S4400000500-750 lt. 1/2" -
C o ntro f langia
C o verf lange
Modello
M odel
A cciaio zincato A cciaio verniciato
RICAMBI PER VASI
CATALOGO GENERALE - GENERAL CATALOGUE38
SPARE PARTS FOR TANKS
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
CATALOGO GENERALE - GENERAL CATALOGUE 39
ACCESSORI PER VASIACCESSORIES FOR TANKS
Vecchio - Old Nuovo - New
V50800 ACVALH21PR000000
V50801 ACVALH27PR000000
V50802 ACVAL200PR000000
V50901 ACFIT5VI00H72000
V50902 ACFIT5VI00H82000
V50903 ACFIT5VI00H92000
V50941 ACMAND50PT006000
V50951 ACMAND50RD006000
V50952 ACMAND50RD010000
5 pz V50950 ACVALD50KT016000
V50606 ACPSWVM5MN000000
V50601 ACPSWPM5MN000000
V50602 ACPSWPT5TR000000
V50604 ACPSWM12MN000000
V50605 ACPSWT12TR000000
FLS001 ACFLX003MF060000
FLS002 ACFLX003MF080000
FLS003 ACFLX003MF100000
Coprivalvola TPL09 ACCAP519NE000000
Valve cap TPL12 ACCAP024BL000000
TPL06 ACCAP100NE000000
V50920 ACBRK24000000000
V50930 ACBRK54000WLM000
V50940 ACBRK25400000000
Codice standard - Standard Code
capacità 25-40 l – capacity 25-40 lts.
capacità 5-40 l – capacity 5-40 lts.
capacità 2-40 l – capacity 2-40 lts.Plate for Extravarem LR/LC
Acce
ssor
i –
Acc
esso
ries
Nero – Black
Blu – Blue
20-100 lt. nero – black
Staffa per Extravarem LR/LC
Tubo flessibile
Flexible hose
Lunghezza 60 cm con curva M_F, 1” GAS – Length 60 cm, allow M-F, 1” GAS
Lunghezza 80 cm con curva M_F, 1” GAS – Length 80 cm, allow M-F, 1” GASLunghezza 100 cm con curva M_F, 1” GAS – Length 100 cm, allow M-F, 1” GAS
V/M5 VAREM – Monofase – Monophase 10 pz
V/PM5 ITALTECNICA – Monofase – Monophase 10 pzV/PT5 ITALTECNICA – Trifase – Three-phase 10 pzV/PM12 ITALTECNICA – Monofase – Monophase 10 pzV/PT12 ITALTECNICA – Trifase – Three-phase 10 pz
Kit valvola + manometro per Maxivarem LSManometro 0-16 bar CE + Valvola di sicurezza 9 bar CE
Pressostato
Pressure switch
Manometro
Pressure gauge
0-6 bar Ø 50 – ¼” posteriore – rear
0-6 bar Ø 50 – ¼” radiale – radial
0-10 bar Ø 50 – ¼” radiale – radial
Raccordo a 5 vie
5-way connector
Lunghezza – lenght 72 mm
Lunghezza – lenght 82 mm
Lunghezza – lenght 92 mm
Modello - Model Descrizione - Description Confezione minima – Minimum Q.ty
Valvola di precarica
Precharge valve
20-24-35-50-100-150 lt. (21 mm)
5-8-12-19-40-60-80-100 SP lt. (27.5 mm)
200-2000 lt.
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Vecchio - Old Nuovo - New
ANODO_A100000 ANODON1000000000Abbinabile a serbatoi da 80÷150 l - Match to 80÷150 lts. tanks
ANODO_A200000 ANODON2000000000Abbinabile a serbatoi da 200÷500 l - Match to 200÷500 lts. tanks
ANODO_A300000 ANODON3000000000Abbinabile a serbatoi da 750÷1500 l - Match to 750÷1500 lts. tanks
ANODO_A400000 ANODON4000000000Abbinabile a serbatoi da 2000÷5000 l - Match to 2000÷5000 lts. tanks
ANODO_A1CONTR ANODO1COTR000000 Abbinabile a serbatoi da 80÷150 l - Match to 80÷150 lts. tanks
ANODO_A2CONTR ANODO2COTR000000Abbinabile a serbatoi da 200÷500 l - Match to 200÷500 lts. tanks
ANODO_A3CONTR ANODO3COTR000000Abbinabile a serbatoi da 750÷1500 l - Match to 750÷1500 lts. tanks
ANODO_A4CONTR ANODO4COTR000000Abbinabile a serbatoi da 2000÷5000 l - Match to 2000÷5000 lts. tanks
ANODO_AE/1000 ANODOE1000000000Abbinabile a serbatoi da 200÷1500 l - Match to 200÷1500 lts. tanks
ANODO_AE/2000 ANODOE2000000000Abbinabile a serbatoi da 2000÷3000 l - Match to 2000÷3000 lts. tanks
ANODO_AE/3000 ANODOE3000000000Abbinabile a serbatoi da 4000÷10000 l - Match to 4000÷10000 lts. tanks
Codice - Item Codice - Item Dettagli - DetailsTermometro sonda con guaina in rame ½” GASProbe thermometer with copper steath ½” GAS
Codice - Item Codice - Item Dettagli - Details
RERT020220114 RERT202201014000 2 kW
REI0020220114 REI0202201014000 2 kW, 220 VREI0030220114 REI0302201014000 3 kW, 220 VREI0040220114 REI0302201014000 4 kW, 220 VREI0040380112 REI0402201014000 4 kW, 380 VREI0050380112 REI0403801012000 5 kW, 380 VREI0060380112 REI0503801012000 6 kW, 380 VREI0080380112 REI0603801012000 8 kW, 380 VREI0100380112 REI0803801012000 10 kW, 380 V
REI0120380112 REI0003801012000 12 kW, 380 V
REIT040380112 REIT043801012000 4 kW, 380 VREIT050380112 REIT053801012000 5 kW, 380 VREIT060380112 REIT063801012000 6 kW, 380 VREIT080380112 REIT083801012000 8 kW, 380 VREIT100380112 REIT103801012000 10 kW, 380 V
REIT120380112 REIT123801012000 12 kW, 380 V
Dettagli - DetailsCodice standard - Standard Code
Resistenze elettriche inox senza termostato - Electric stainless steel resistances without thermostat
Resistenze elettriche inox con termostato - Electric stainless steel resistances with thermostat
TERMOMETRO - THERMOMETER
TERMOMETRO
RESISTENZE ELETTRICHE - ELECTRIC RESISTANCES
TERMOMETRO
Resistenza in rame - Copper resistance
Anodi elettronici - Electronic anodes
Acce
ssor
i per
The
rmov
arem
- Ac
cess
orie
s fo
r The
rmov
arem
ANODI - ANODES
Anodi in magnesio - Magnesium anodes
Anodi in magnesio con controllo - Magnesium anodes with control
ACCESSORIES FOR THERMOVAREMACCESSORI PER THERMOVAREM
CATALOGO GENERALE - GENERAL CATALOGUE40Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
GENERAL SALES CONDITIONSCONDIZIONI GENERALI DI VENDITA
CATALOGO GENERALE - GENERAL CATALOGUE
PremessaLe nostre vendite sono effettuate alle condizioni espresse dalle nostre conferme d’ordine le quali annullano ogni diversa clausola stampata o manoscritta sulle ordinazioni e ogni corrispondenza del compratore.Ogni trasmissione di ordinazioni alla nostra società implica l’adesione del compratore alle condizioni generali di vendita sotto riportate.1. Ordinativi e termini di consegnaI contratti di vendita si intendono sempre effettuati nel domicilio del fornitore qualunque sia il luogo di assunzione della commessa.Le ordinazioni che il compratore conferisce sia a mezzo degli agenti di vendita o altri intermediari si intendono sempre soggette alla riserva di approvazione da parte del fornitore, approvazione che viene data con l’invio della conferma d’ordine.Il compratore al ricevimento della conferma d’ordine è tenuto a verificare tutti i dati riportati e a comunicare immediatamente eventuali discordanze rispetto all’ordine conferito.Il testo della nostra conferma d’ordine prevarrà in ogni caso rispetto a eventuali altri testi di offerte e ordinazioni ed è considerato accettato a tutti gli effetti qualora non intervengano contestazioni da parte del compratore entro un periodo massimo di quindici giorni dalla data di conferma.L’espletamento delle ordinazioni ammette la tolleranza del 10% in più o in meno sul quantitativo globalmente ordinato salvo diversa pattuizione riportata esplicitamente sulla nostra conferma, senza che ciò dia luogo a variazioni di prezzo.2. Spedizioni dei materialiLe spedizioni dei prodotti sono effettuate normalmente a nostra cura secondo le modalità esplicitamente riportate nella conferma d’ordine.Nel caso in cui il ritiro dei prodotti venga effettuato a cura del compratore, lo stesso si impegna a ritirare il materiale presso i nostri magazzini alla data comunicata di messa a disposizione da parte dei nostri servizi. Trascorsi cinque giorni dalla data di comunicazione di merce pronta alla spedizione senza che l’acquirente abbia provveduto al ritiro, la nostra società ha il diritto di spedire i materiali approntati addebitando le spese al compratore.Prima di inviare il mezzo di trasporto per il ritiro della merce, il compratore è obbligato a prendere accordi col venditore sul tempo e luogo di incarico.3. Passaggio della proprietà e dei rischiSalvo pattuizione contraria, che deve espressamente risultare dalla conferma d’ordine, la proprietà dei materiali si trasferisce al compratore solo ed esclusivamente al momento della consegna al vettore.Pertanto, i materiali viaggiano a rischio e pericolo del compratore.Eventuali inconvenienti dipendenti da avarie di viaggio, disguidi ferroviari o navali o soste di qualsiasi natura, non potranno essere imputati al venditore.Eventuali riserve e/o reclami connessi al trasporto possono essere esposti dal compratore esclusivamente nei confronti del vettore. La nostra società non è responsabile per quanto avvenuto dopo la consegna dei materiali al vettore.Nessuna responsabilità può essere imputata alla nostra società per danni ai materiali in conseguenza delle condizioni del carico ma esclusivamente al trasportatore o a terzi.4. ImballaggioLa nostra società provvede all’imballaggio secondo esperienza e usi.L’impiego di imballaggi particolari o l’esclusione dell’imballaggio dovranno essere richiesti espressamente dal compratore all’atto dell’ordinazione e saranno oggetto di trattativa a fini economici.5. Termini di consegnaI termini di approntamento, spedizione o consegna risultante dalle nostre conferme d’ordine hanno solo valore indicativo e sono dati sempre senza garanzia.Eventuali ritardi non daranno luogo in nessun caso al risarcimento di danni o alla risoluzione, anche parziale, del contratto.In tutti i casi di mancanza di materie prime, energia elettrica, guasti ai macchinari, interruzioni di servizi di trasporto, agitazione del personale, pubbliche calamità, ecc., la nostra società è da ritenersi libera da responsabilità per mancata o ritardata consegna.6. Condizioni di pagamentoIl pagamento delle nostre forniture deve essere effettuato netto di ogni spesa, sconto e tassa nei termini pattuiti e riportarti sulla nostra conferma di vendita.Il luogo di pagamento è a tutti gli effetti il domicilio del venditore, anche in caso di emissione di effetti cambiari o di ricevute.Il mancato o ritardato pagamento delle nostre fatture, oltre a dar luogo all’immediata decorrenza degli interessi che saranno addebitati nella misure del “prime rate” maggiorato di 3 punti, dà diritto alla nostra società di pretendere il pagamento anticipato delle restanti fatture e di sospendere o annullare l’espletamento degli altri contratti in corso senza che il compratore possa avanzare pretese di compensi o indennizzi.7. PrezziI prezzi pattuiti e riportati nelle conferme di vendita sono al netto di qualsiasi onere e se non altrimenti specificato si intendono franco stabilimento del venditore.Ogni variazione dei costi, in particolare delle materie prime e della manodopera, che incidano in modo rilevante sul prezzo del prodotto verificatosi durante l’esecuzione del contratto, dà diritto a una proporzionale revisione del prezzo.Tale revisione è in facoltà del venditore anche quando il termine di consegna venga prorogato su richiesta dell’acquirente.Il prezzo è inteso per singolo pezzo.8. ReclamiLe contestazioni sulla qualità e sulla quantità o per merce non corrispondente a quanto precisato nella nostra conferma di vendita, devono essere formulate all’atto stesso del ricevimento della merce, menzionando le differenze riscontrate sul documento di trasporto e successivamente confermate a mezzo lettera raccomandata entro 10 giorni dal ricevimento.Qualora il reclamo risulti tempestivo e fondato, dopo l’accertamento di nostri tecnici, l’obbligo della nostra società è limitato alla sostituzione o integrazione della merce riconosciuta non corrispondente, nello stesso luogo di consegna della fornitura primitiva, previa restituzione di questa, escluso qualsiasi diritto da parte del compratore di chiedere la risoluzione del contratto.Reclami e proteste non danno diritto al compratore di sospendere il pagamento della fattura della merce contestata.9. GaranziaTutti i prodotti riconosciuti difettosi entro 24 mesi dalla data di costruzione (60 nel caso dei serbatoi coibentati Thermovarem) verranno accreditati. La garanzia non si applica nel caso il difetto sia imputabile a un uso diverso cui il serbatoio è destinato o siano stati fatti superare al serbatoio i limiti di pressione e di temperatura indicati. I serbatoi difettosi dovranno esserci restituiti franco il nostro stabilimento di Limena. La rispedizione verrà fatta franco nostro grossista. Per i serbatoi difettosi non verrà riconosciuto alcun costo extra (montaggio, smontaggio, trasporto, manodopera, etc. ...) oltre a quello del prodotto non conforme. Ci riserviamo il diritto di apportare senza alcun avviso tutte le modifiche che a nostro giudizio rappresentino un miglioramento al prodotto. Non si risponde di eventuali errori riportati nei dati di listino. Tutte le precariche si intendono con una tolleranza di ± 0,2 bar per i primi 6 mesi dalla data di produzione.10. Foro competenteForo esclusivamente competente per ogni controversia relativa alle vendite e relativi contratti conclusi dalla nostra società è quello di Padova.11. I recipienti a pressione sono soggetti a normative e regolamentazioni diverse nei paesi in cui vengono installati. È responsabilità dell’acquirente rispettare tali normative vigenti e richiedere e utilizzare i modelli appropriati.Varem non risponde di errori tipografici o di traduzione.
IntroductionOur sales are subject only to the conditions specified in our Order Confirmation and annul any printed or verbal clauses in the purchaser’s order or correspondence.All orders sent to Varem S.p.A. imply acceptance and observance by the purchaser of the hereunder General Sales Conditions.1. Orders and delivery termsThe sales contracts are understood to be always carried out at any one of the Varem’s plants, regardless of where the order has been accepted. Orders placed by the purchaser or by any other type of intermediary are always subject to approval by Varem. Said approval is given when the Order Confirmation is sent.Upon receipt of the Order Confirmation, the purchaser is required to check all the data given and to immediately communicate any discrepancies with respect to the order placed.The text of our Order Confirmation will prevail in any case over any other offers or orders and is considered accepted to all effects if no complaints are received from the purchaser within a maximum of 3 days from the confirmation date.A tolerance of ± 10% with respect to the overall quantity ordered is permitted in the fulfilment of the order, unless an agreement has been reached and is quoted in our Order Confirmation, without this giving rise to price variations.2. Shipment of goodsShipments are normally carried out by Varem S.p.A. in accordance with the procedures specified in the Order Confirmation.If the purchaser withdraws the goods, said purchaser is to withdraw the goods from our warehouses on the date they are made available from our services. Once 3 days have passed from the date of communication of the goods being ready for delivery without the purchaser withdrawing the orders, Varem S.p.A. is entitled to deliver the goods, charging the purchaser with transport costs.Prior to sending a vehicle for the withdrawal of the goods, the purchaser is obliged to agree with the Varem S.p.A. Dispatching Department on the time and place of loading.3. Transfer of ownership and risksUnless agreed differently, with said agreement written on the Order Confirmation, ownership of the goods is transferred to the purchaser only and exclusively at the time of loading onto the carrier.Consequently the goods travel at the purchasers risk.Any problems arising from damage during transport and/or delays of any kind cannot be attributed to Varem S.p.A..Any reservations and/or complaints connected with transport must be made by the purchaser to the carrier (as Varem S.p.A. is not responsible for whatever happens to the order once it leaves its premises).4. PackingVarem S.p.A. will provide for packing according to its experience and methods normally adopted. The use of special packing or exclusion of such must be explicitly requested by the purchaser at the time of the order and will be subject to negotiation with regards to cost.5. Delivery termsThe preparation, shipment and/or delivery times resulting from our Order Confirmation are only a guide and are not firm.The purchaser will decline the right to claim compensation for damages or termination, full or partial, of the contract.In all cases of lack of materials, electricity, machinery breakdown, interruptions in transport services, staff agitation, public calamities, etc., Varem S.p.A. is exempt from all responsibilities for failure or delayed delivery.6. Payment conditionsPayment of our goods must be made net of all expenses, discounts and taxes in the terms agreed and given in our Order Confirmation.The place of payment, as well as the issue of bills of exchange and receipts, are to all effects the domicile of Varem S.p.A..Failure or delayed payment of our invoices will not only lead to interest charges, but will also lead to the advance payment of remaining invoices and to the suspension or cancellation of the performance of the other contracts in progress without the purchaser having the right to claim compensation or indemnity.7. PricesThe prices agreed or given in the sales confirmations are net of any charges and, if not otherwise specified, are ex-works Varem S.p.A..Any variations in costs, particularly of raw materials and labour, substantially affecting the price of product, which occur during the fulfilment of the contract, will authorize Varem S.p.A. to revise prices in proportion to the increase.Varem S.p.A. also has the right to revise prices when the delivery term is extended by the purchaser beyond the date already established by Varem S.p.A..8. ComplaintsComplaints concerning quality or quantity, or goods not corresponding to our Order Confirmation, must be forwarded upon receipt of the goods, specifying the differences found in the transport document, and subsequently confirmed by registered letter within 7 days from receipt.If the complaint is promptly and properly forwarded, and considered to be founded after inspection by our technicians, Varem S.p.A.’s obligations are confined to replacement or integration of the goods at the same place of delivery of the original supply after return of the mistaken goods; except for all rights on the part of the purchaser to demand termination of the contract.Complaints and protests do not give the purchaser the right to suspend payment of the invoice for the goods in question.9. WarrantyA credit note will be issued for all products that have been accepted as defective by Varem S.p.A. within 24 months (60 months for Thermovarem insulated tanks) from the date of production. The warranty does not apply if the defect is due to use of the tank other than those specified in the authorized price list / catalogue or if the indicated maximum pressure and/or temperature values have been exceeded. All faulty tanks must be returned to Varem S.p.A., Limena at the expense of the sender. Return shipment is made free of charge to Varem S.p.A. wholesaler. No extra cost will be acknowledged for faulty tanks (assembly – disassembly – transport – labour – etc.) besides the cost of the non-conforming product. We reserve the right to carry out, without advance warning, all the changes that in our judgment represent an improvement of the product. Tolerance of the pre-charges is ±0.2 bar of the specified value for the first 6 months from the date of production.10. JurisdictionThe Court of Padua will be exclusively empowered to settle any disputes arising from the sales of contracts concluded by Varem S.p.A..11. Pressure tanks are subject to different norms and regulations in the countries where they are installed. The purchaser is responsible for respecting such norms and for using the proper models. Varem S.p.A. totally declines any responsibility from any case where a tank has been mistakenly used.Varem S.p.A. is not responsible for any typographical or translation errors.
41Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz
Varem s.p.a [email protected], [email protected] tel. +39 049 8840322fax +39 049 8841399 P. Iva 01010270286
Impianto di Bovolenta - sede legaleBovolenta plant - registred officevia Sabbioni 2, I-35024 Bovolenta (PD) - Italy45° 16’ 02.49” N, 11° 55’ 51.49” E
Impianto di Limena - quartier generale Limena plant - headquartersvia del Santo 207, I-35010 Limena (PD) - Italy45° 27’ 43.93” N, 11° 15’ 12.44” EAuto: uscita A4 Padova Ovest, direzione Trento/Bassano, prima uscita Limena By car: exit highway A4 Padova Ovest, way to Trento/Bassano, first exit to Limena
COME RAGGIUNGERCI HOW TO REACH US
CONTATTI: CONTACTS:
LIMENA
LEGNARO
CASALSERUGO
PONTELONGO
TERRASSA
CONSELVE
CARTURA
PIOVE DI SACCO
CARRARA S.GIORGIO
Via del Santo, 207
Via Sabbioni, 2
PADOVA
BOVOLENTA
PD ESTPD OVEST
PADOVA03
/14
- 100
0
Cooke Industries - Phone: +64-9-579 2185 Fax: +64-9-579 2181 Email: [email protected] Web: www.cookeindustries.co.nz