The quality Made in Italy
PRODUCTS CATALOGUE
Teknel: Italian leader in mobile induction heating systems
www.teknelinduction.com MADE IN ITALY
Workshop equipment®
Workshop equipment
The best equipment for your workshopAbout teknel: who we areTeknel is an Italian producer of workshop equipment, leader in mobile induction heating systems. Backed with over 15 years’ experience in the market, it o�ers a huge range of products and is able to satisfy the most di�erent and various requests within heavy workshop.
Always present at the most important branch trade fairs, Teknel has become a well known company, asserting itself over the years and consolidating its position of leader company in the field of induction heating.
Competence, experience and innovation are the strength points of our company. Keeping an eye on the future, we aim at a constant technological development which enables us to keep in step with the times.
The constant commitment in the research aimed to improvement, grade materials and the passion that we put in our work, are the key of Teknel products quality. All entirely MADE IN ITALY, from the design to the final product.
Our equipment is well known for its incredible performances. With a wide range of machines continuously growing (now from 0,4 to 200 kW), Teknel o�ers the perfect working tool for each situation.
Besides, Teknel is able to provide you with a customised solution for your work, because every problem is di�erent from another, and we’re here to solve it.
Teknel induction heatersHeat every kind of metal (aluminium included) and ferrous material, in few seconds.
Thanks to our heaters you can definitevely quit the use of welding torch and you can even work near parts sensible to heat like cables or pipes, without the risk of damaging them: with the induction technique, heat is generated directly inside the metal itself. While the welding torch brings the surface temperature of the metal to more than 3000°C modifying inevitably the characteristics of the metal itself, induction heating generates heat directly inside it at a depth of 5mm only in the requested point: it is su�cient to stop heating at a temperature of 500/600°C to carry out the most common operations of straightening, bending, replacing of bolts and bearings.
All our machines are designed to guarantee the highest performance and reliability: for this reason each of them is equipped with an INSULATION TRANSFORMER, to ensure the user maximum safety, even in the most unfavourable and unpredictable situations.
Fields of applicationTrucks and repairing works, construction steel, petrochemical products, industrial plants, shipyards, railways, agricultural machinery, big construction yards, quarries, mines, construction of bridges and galleries, construction of containers.
THE VERSATILITY OF CUSTOMIZATIONThanks to the incredible versatility of our machines, it's possible to command them with computerised processes through PLC, timer or other systems. By connecting pyrometer, thermocamera or other measuring tools you can control the working temperature in order to achieve an absolute precision when heating. The customisation of the heating inductor allows the installation of the machine on any industrial plant, through the study of a solution created specifically for your needs.
THE TECHNOLOGY INSIDE TEKNELTeknel machines are run by a powerful microprocessor ARM-Cortex M4 of latest generation with exclusive DIP (Digital Induction Processing) technology; it guarantees at the same time a complete reliability of the process, a high precision in the regulation and a high level of adaptability to the di�erent working conditions.All the devices on our power boards are mounted using the Surface Mount Technology, which guarantees an incredibly higher quality and reliability of the circuits compared to the obsolete PTH technology. Besides, SMT allows to have lower resistance and inductance at the connection and better EMC performance, which guarantee a rate of faults of our electronics below 0,5%.
ECO-LOGICDespite their high power, consumption of Teknel induction heaters is really low: this is due to very short working times. In terms of monetary savings you can save more than 50% if compared to the use of gas tanks.By using Teknel machines, you’ll have not only a monetary saving, but you’ll also help the enviroment, avoiding the burning of gas for heating the part to work and optimizing the consumptions by using a high e�ciency machine.Our machines have passed strict tests with sophisticated devices and have obtained all the certifications foreseen by the European regulations also regarding the emissions of electromagnetic fields.
Workshop equipment®
Workshop equipment®
DRAGONFLY
0,4kW DENT REMOVER
Teknel DragonFly is an innovative product, useful for removing small and medium dents on the car body, for example dents caused by hail. Thanks to INDUCTION technology, the accessory touches lightly the car body, heating it and pulling the dent in few seconds without damaging the paint; this means that you don't need to paint the car body again. It's easy to use thanks to its power regulator.
freq. kHzAM 20°C
220-60
230V, 16A
0,4 kW
mKglt
XY
Z
cm.m
4/ 25x15x2633 Air Cooling20 minutes
MAX POWER
It's possible to work up to a distance of 6 metres, thanks to the long power cable and long accessory cable. (They have both a length of 3 metres). It's easy to transport because it's small and very light (it weighs only 4 kilos) and has a strong stainless steel handle. Besides the button to start the induction is situated directly on the accessory, so that you can work even in the most di�cult places without the need of moving repeatedly a pedal button.
cod: DF1
DRAGONFLY 3
3,0kW BODY SHOP MULTIPURPOSE
Machine designed to carry out various body shop works with 4 interchangeable tools: dent removal tool, label removal tool, windshield removal tool and bolt removal tool. It's the ideal machine to dismantle every kind of material glued on metal support without damaging the piece that has to be dismantled. It allows to unlock rusty bolts, to remove paint, to remove thermal rear windows, side windows, moldings, sound deadening sheaths, insulating sheaths, stickers without leaving any glue residue. With the tools for removing stickers, windscreens and bolts it's even possible to work on aluminium.
The power cable of the machine and the tool cable are both 3 metres long, so it's possible to work up to a total distance of 6 metres. The machine is equipped with sound signal, has a powerful cooling fan and a strong stainless steel handle. Moreover the button to start the induction is situated direclty on the tool, not on the pedal: this means that it is much more comfortable to work even in the most di�cult places (for example to remove a sticker on a coach), without the need of moving continuously a pedal button.
freq. kHzAM 20°C
2020-60
SHUCKO 16A
3,0 kW
mKglt
XY
Z
cm.m
9 / 39x26x1933 Air Cooling20 minutes
MAX POWER
cod: DF3
cod: DF3DR
DENT REMOVER STICKER REMOVER
BOLT HEATER GLASS REMOVER
cod: DF3DR cod: DF3SR
cod: DF3BH cod: DF3GR
Workshop equipment®
DRAGON’S BREATH
1,6kW PLASTIC WELDER
Machine designed to repair the damaged plastic parts of the car body. Through a temperature-controlled air jet it is able to melt some plastic rods which will interact and amalgamate perfectly with the repaired part, assuring better resistance and elasticity. No smoke inhalation during this working and welding phase, also thanks to a special pistol. Possibility to regulate the temperature directly on the pistol, digital thermometer on it. Pressure regulator and manometer the pistol tube 2,75 metres long and the power cable 2,8 metres long allow you to work up to a total distance of 5,55 metres. It is possible to repair broken plastic portions and even rebuild missing plastic portions. Coupling for the air compressorNozzles kit for air exitYou can work the repaired portion of plastic after only few seconds
DRAGON’S CLAW
3,7V PLASTIC STAPLER
Teknel Dragon’s Claw is a staple welder for plastic, used to repair broken or cracked plastic parts of the body shop. It heats a steel clip, which penetrates the plastic and strenghtens its structure. Powered by battery, light and easy to handle, you can use it in the most di�cul and dark places, thanks to its LED light which illuminates the point where you’re working. It comes up with 3 di�erent types of clips, to adapt to every type of reparation and application. There is a battery charger with 4 di�erent plugs for every kind of wall socket and a handy case for the transport. It is equipped with a LI-ION battery for a longer lasting charge.
cod: DB16
Workshop equipment®
BUTTERFLY
3,5kW PORTABLE INDUCTION HEATER
Teknel is proud to present the smallest and lighter induction heater ever. Despite its incredibly compact dimensions and weight, the Butterfly o�ers top performances and very high reliability.The Butterfly is the smallest high-power induction heater with liquid cooling system ever: with a power of 3,5kW and more than 30 minutes of non-stop working time, it is unmatched. With just 7Kg of weight and dimensions comparable to a small welder, this machine is one of a kind. These incredible performances are possible thanks to its unique miniaturized cooling system, consisting of a tank for the cooling liquid and of an e�cient pump.The machine is completely built with the latest Surface Mount Technology, which guarantees the highest quality of the circuits and an incredibly high reliability, resulting in a rate of faults of our electronics below 0,5%.
IT PATENT PENDING
NEW SPECIAL INDUCTOR WITH FAST CONNECTIONThe new Butterfly comes up with the new special fast-connection inductor: with its patented new locking method, you can change it in just a few seconds really easily. Thanks to its special shape designed from our engineers, the power e�cien-cy is much higher than in the previous ones.
The Butterfly is also equipped with an INSULATION TRANSFORMER, to protect the operator even in the most unpredictable and unfavorable situations.
71 21x45x2641,82020-60 Liquid Cooling
mKglt
freq. kHzAM 20°C
XY
Z
cm.m230V, 16A
3,5 kW 30 minutes
MAX POWER
cod: BFH01
cod: IND358FRNM
cod: IND358NM
Workshop equipment®
DRAGON 300
3,7kW INDUCTION HEATER
Machine of high power and exceptional e�ciency designed to heat ferrous materials and metals in general, aluminium included. It creates heat directly inside the metal at a depth of 5 mm. It's able to bring to a red hot temperature (800°C) a surface of 20 x 20mm (5mm thick) in only 8 seconds. The absence of free flames allows to work even near cables, pipes or other parts sensible to heat. While the oxygen flames bring the surface temperature of the metal to more than 3000°C modifying inevitably the characteristics of the metal itself, induction heating generates heat direclty inside it at a depth of 5mm only in the requested point; it is su�cient to stop heating at a temperature of 500/600°C to carry out the most common operations of straightening, bending, replacing of bolts and bearings. It's equipped with a special INSULATION TRANSFORMER, which guarantees maximum safety to the user even in the most unfavourable conditions. The liquid-cooled heating torch gives the possibility to change the inductor, to heat also frontally.
20°C
All the machines now come up with the new spe-cial fast-connection inductor: with its patented new locking method, you can change it in just a few seconds really easily. Thanks to its special shape designed from our engineers, the power e�ciency is much higher than in the previous ones.
395 43x43x62632020-60 Liquid Cooling
mKglt
freq. kHzAM
XY
Z
cm.m230V, 16A
3,7 kW 45 min.MAX POWER
cod: IHD03
IT PATENT PENDING
NEW SPECIAL INDUCTOR WITH FAST CONNECTION
cod: IND358FRNM
cod: IND358NM
Workshop equipment®
EVOLUTION
3,7kW INDUCTION + BODYSHOP TOOLS
Innovative induction heater which combines the 3,7kW power of the Dragon 300 liquid-cooled with the characteristics of the Dragonfly3 (body shop multipurpose). It has the possibility to use all accessories of a normal, liquid-cooled induction heater plus the 4 tools essential for the car body (dent removal tool, label removal tool, windshield removal tool and bolt removal tool).
freq. kHzAM 20°C
2020-60
230V, 16A
3,7 kW
mKglt
XY
Z
cm.m
395 43x43x6263 Liquid Cooling
cod: IHDEVO
IT PATENT PENDING
NEW SPECIAL INDUCTOR WITH FAST CONNECTION
cod: IND358FRNM
cod: IND358NM
All the machines now come up with the new spe-cial fast-connection inductor: with its patented new locking method, you can change it in just a few seconds really easily. Thanks to its special shape designed from our engineers, the power e�ciency is much higher than in the previous ones.
cod: DF3DR
DENT REMOVER
cod: DF3DR
STICKER REMOVER
cod: DF3SR
BOLT HEATER
cod: DF3BH
GLASS REMOVER
cod: DF3GR
45 minutes(accessories air cooling 20 min.)
MAX POWER
Workshop equipment®
DRAGON 500
5,4kW INDUCTION HEATER
Machine of high power and exceptional e�ciency designed to heat ferrous materials and metals in general, aluminium included; incredibily versatile, it has immediately become Teknel's best seller. It cre-ates heat directly inside the metal at a depth of 2,5mm. It's able to make red-hot (800°C) a surface of 40 x 40mm (5mm thick) in only 3 seconds. The absence of free flames allows to work even near cables, pipes or other parts sensible to heat. While the oxygen flames bring the surface temperature of the metal to more than 3000°C modifying inevi-tably the characteristics of the metal itself, induction heating generates heat inside it only in the requested point; it is su�cient to stop heating at a temperature of 500/600°C to carry out the most common operations of straightening, ben-ding, replacing of bolts and bearings. It's equipped with a special INSULATION TRANSFORMER, which guarantees maximum safety to the user even in the most unfavourable situations.
freq. kHzAM 20°C
2520-50
230V, CE 2P+T
5,4 kW
mKglt
XY
Z
cm.m
6520 43x43x104103 Liquid Coolingcontinuous
cod: IHD05
All the machines now come up with the new spe-cial fast-connection inductor: with its patented new locking method, you can change it in just a few seconds really easily. Thanks to its special shape designed from our engineers, the power e�ciency is much higher than in the previous ones.
IT PATENT PENDING
NEW SPECIAL INDUCTOR WITH FAST CONNECTION
cod: IND358FRNM
cod: IND358NM
16A
Workshop equipment®
DRAGON 800
8kW INDUCTION HEATER
Machine with three-phase power supply but with small dimensions; it creates heat directly inside the metal at a depth of 3,5mm. It's able to make red-hot (800°C) a surface of 40x40mm (6mm thick) in only 3 seconds. The absence of free flames allows to work even near cables, pipes or other parts sensible to heat. While the oxygen flames bring the surface temperature of the metal to more than 3000°C modifying inevitably the characteristics of the metal itself, induction heating generates heat directly inside it only in the requested point; it is su�cient to stop heating at a temperature of 500/600°C to carry out the most common operations of straightening, bending, replacing of bolts and bearings. It's equipped with a special INSULATION TRANSFORMER, which guarantees maximum safety to the user even in the most unfavourable situations.
freq. kHzAM
8020 43x43x1041041615-50 Liquid Cooling
m20°C Kglt
XY
Z
cm.m
8 kW
MODEL
IHD08 continuous
400V, CE 3P+T
cod: IHD08
All the machines now come up with the new spe-cial fast-connection inductor: with its patented new locking method, you can change it in just a few seconds really easily. Thanks to its special shape designed from our engineers, the power e�ciency is much higher than in the previous ones.
IT PATENT PENDING
NEW SPECIAL INDUCTOR WITH FAST CONNECTION
cod: IND358FRNM
cod: IND358NM
Workshop equipment®
16A
DRAGON 1000
11kW INDUCTION HEATER
Machine of high power and exceptional e�ciency designed to heat ferrous materials and metals in general (aluminium included); it creates heat directly inside the metal at a depth of 6mm and it's able to make red hot (800°C) a surface of 40 x 40mm (16mm thick) in only 6 seconds. The absence of free flames allows to work even near cables, pipes or other parts sensible to heat, without the risk of damaging them. While the oxygen flames bring the surface temperature of the metal hotter than 3000°C modifying inevitably the characteristics of the metal itself, induction heating generates heat directly inside it only in the requested point: it is su�cient to stop heating at a temperature of 500/600°C to carry out the most common operations of straightening, bending, replacing of bolts and bearings. It's equipped with a special INSULATION TRANSFORMER, which guarantees maximum safety to the user even in the most unfavourable situations.
freq. kHzAM 20°C
1615-50
400V, CE 3P+T
11 kW
mKglt
XY
Z
cm.m
9620 50x50x100105 Liquid Coolingcontinuous
NEW HIGH POWER EFFICIENCY INDUCTORAll high power machines come out with this new special high power e�ciency inductor: thanks to its particular shape, it is able to supply much more power than the old ones. It is also provided with a resistant protection cap made of teflon, with a new holding system that allows to hold the ferrite in position without using any type of glue.
cod: IHD1000
16A
Workshop equipment®
cod: IND11NST
Front inductor cod: IND11FRST
Teknel induction heatersHeat every kind of metal (aluminium included) and ferrous material, in few seconds.
Thanks to our heaters you can definitevely quit the use of welding torch and you can even work near parts sensible to heat like cables or pipes, without the risk of damaging them: with the induction technique, heat is generated directly inside the metal itself. While the welding torch brings the surface temperature of the metal to more than 3000°C modifying inevitably the characteristics of the metal itself, induction heating generates heat directly inside it at a depth of 5mm only in the requested point: it is su�cient to stop heating at a temperature of 500/600°C to carry out the most common operations of straightening, bending, replacing of bolts and bearings.
All our machines are designed to guarantee the highest performance and reliability: for this reason each of them is equipped with an INSULATION TRANSFORMER, to ensure the user maximum safety, even in the most unfavourable and unpredictable situations.
Fields of applicationTrucks and repairing works, construction steel, petrochemical products, industrial plants, shipyards, railways, agricultural machinery, big construction yards, quarries, mines, construction of bridges and galleries, construction of containers.
DRAGON 2000
16kW INDUCTION HEATER
Machine of high power and exceptional e�ciency designed to heat ferrous materials and metals in general, aluminium included; it's particularly suitable for works on heavy vehicles, like trucks, trailers or semi-trailers. It creates heat directly inside the metal at a depth of 6mm and it's able to make red-hot (800°C) a surface of 40x40mm (16mm thick) in only 4 seconds. The absence of free flames allows to work even near cables, pipes or other parts sensible to heat. While the oxygen flames bring the surface temperature of the metal to more than 3000°C modifying inevitably the characteristics of the metal itself, induction heating generates heat directly inside it and only in the requested point: it is su�cient to stop heating at a temperature of 500/600°C to carry out the most common operations of straightening, bending, replacing of bolts and bearings. It's equipped with a special INSULATION TRANSFORMER, which guarantees maximum safety to the user even in the most unfavourable situations.
freq. kHzAM 20°C
2515-50
400V, CE 3P+T
16 kW
mKglt
XY
Z
cm.m
15025 51x60x111106 Liquid Coolingcontinuous
NEW HIGH POWER EFFICIENCY INDUCTORAll high power machines come up with this new special high power e�ciency inductor: thanks to its particular shape, it is able to supply much more power than the previous ones. It is also equipped with a resistant protection cap made of teflon, with a new holding system that allows to hold the ferrite in position without using any type of glue.
cod: IHD2000
Workshop equipment®
32A
cod: IND1621ST
Front inductor cod: IND1621FRST
XPERIENCE DUAL CORE
22kW INDUCTION HEATER
XPERIENCE XP21
21kW INDUCTION HEATER
Machine with outstanding power designed for special heating applications that can’t be done with standard machines; it is suitable for ferrous materials and metals in general, aluminium included. It's equipped with a double cooling system for very long working times without interruptions. With its powerful Dual-core processor, this special machine can be used with inductors of di�erent shape, which is impossible for any other machine. This will allow you to have the tool that fits perfectly to the work you have to do.
SPECIAL APPLICATIONS- PREHEATING OF BIG PIPES FOR WELDING - UNSCREW HOLLOW BOLTS - CUSTOMIZED INDUCTORS - AUTOMATION THROUGH PLC- POSSIBILITY OF CONNECTION TO THE INDUSTRIAL COOLING SYSTEM
freq. kHzAM
19030 101x64x951063215-50 DoubleLiquid Cooling
m20°C Kglt
XY
Z
cm.m
21 kW
MODEL
XP21
XP22
continuous
400V, CE 3P+T
22 kW 10-50 32 continuous 6 10 DoubleLiquid Cooling 30 190 101x64x95
The Xperience XP21 is a machine of outstanding power designed to heat ferrous materials and metals in general, aluminium included; it's equipped with a double cooling system for very long working times without interruptions; it enables to bring to red-hot a surface of 40x40mm (20mm thick) in only 3 seconds. The Xperience XP21 has the same super cooling system and chassis as the XP22, but with a di�erent processor, which allows to have a lot of power concentrated in the standard inductor.
cod: XP22
cod: XP21
Workshop equipment®
32A
32A
cod: IND1621STFront inductor cod: IND1621FRST
TWIN16+
2x16kW INDUCTION HEATER
Machine with a double heating system to work on more points at the same time, or to supply high power on a single piece to work.The TWIN POWER induction heaters series for ferrous materials and aluminium has been designed to meet the needs of the most innnovative workshops and to carry out the most di�cult works: with a TWIN POWER induction heater you can heat more points of a single piece AT THE SAME TIME, doing the operation in less time and easily.
Also available in 2x7,5 and 2x11kW of power
freq. kHzAM 20°C
5015-50
400V, CE 3P+T
32 kW
mKglt
XY
Z
cm.m
2502x25 101x64x95102x6 DoubleLiquid Coolingcontinuous
NEW HIGH POWER EFFICIENCY INDUCTORAll high power machines come out with this new special high power e�ciency inductor: thanks to its particular shape, it is able to supply much more power than the old ones. It is also provided with a resistant protection cap made of teflon, with a new holding system that allows to hold the ferrite in position without using any type of glue.
This induction heaters series, built to guarantee the best performance and reliability, is recommended for the heaviest and most di�cult uses. Suggested for industrial body shops, industries and big mechanical workshops.All our machines are equipped with an INSULATION TRANSFORMER, to ensure the operator and absolute safety, even in the most unfavourable and unpredictable situations.
cod: TWIN16
Workshop equipment®
63A
cod: IND1621ST
Front inductor cod: IND1621FRST
Machine designed to preheat tubes before welding. It's ideal for oil pipelines, gas pipeli-nes, etc.The absence of free flames will allow you to work even near parts sensible to heat, like plastic parts or cables.
Thanks to its double heating winding, you’ll be able to heat simultaneously two parts of the piece to work, or give more heating power to the same part.
PRACTICAL APPLICATIONS - Preheating for welding (pipelines) - Welding tempering - Paint removal - Coatings removal
PRE 32
32kW PRE HEATING FOR WELDING
TECHNICAL FEATURES:Max power: 32kW, separate power adjustmentSupply: 400V@50/60Hz, 50AWork frequency: 10-50kHz auto regulationMax pipe diameter heating: 1000mmCooling system: liquid
Workshop equipment®
X-treme series machines are induction heaters designed specifically to meet the needs of the heavy industries. With a power that goes from 50 to 200kW and its compact dimensions, this series of machines is perfect for the assembly lines.We can produce customized equipment and heating inductors that adapt perfectly to the kind of work you have to carry out.You can simply connect the machine directly to the cooling system of the factory.Our systems use IGBT of latest technology, planned to resist high power and protected from short circuit, overcurrent and misusage.
X-TREME SERIES
50-200kW CUSTOM HIGH POWER INDUCTION HEATER
PRACTICAL APPLICATIONS - Assembly lines - Steel rolling mill - Steel industries - Steel furnaces - Foundries - Steel hardening
Workshop equipment®
CERBERUS
5,4kW INDUCTION + PLASMA CUTTER + WELDER
The ultimate working tool: an induction heater, a plasma cutter and a welder, all in one machine ready and comfortable to use. You can pass from one mode to the other easily and fastly and use the tool you need. There is only one plug for the machine: this means that you won’t have to change multiple plugs every time that you have to switch from one mode to another, just select the one you need with the main switch, and you’re ready to work. All the various tools have their own holder, to have everything always ready and tidy.
INDUCTION HEATER MODEWith an induction heater of 5,4kW you can carry out all the medium and small works that are frequent in a car workshop, like heating a car arm to straighten it up or unlock a rusty bolt. Heat is created directly inside the metal at a depth of 5mm, bringing to red-hot (800°C) the interested point in one second only.
Available also with induction of 8, 11 and 16kW
PLASMA CUTTER MODECut metal up to 12mm thick in a very short time and you will get a precise cut; you only need to connect the machine to the compressed air and it's ready to use.TECHNICAL FEATURESAutomatic control of the pilot arcMax cutting thickness: 12mmDuty cycle: (35%-25A-90V; 60%-17A-86,8V; 100%-13A-85,2V)
cod: IHC500
Workshop equipment®
WELDER MODEAn e�cient welding malchine ready and easy to use. It can be used both in TIG and MMA mode, thanks to the specific torches interchangeable in few seconds. TECHNICAL FEATURESOutput current in MMA mode: 10-140AOutput current in TIG mode: 10-140ADuty cycle (10 min at T=25°C): 35% - 140AAnti-stickingWelding system with inverter technology : lift-TIG start function and MMAHot start controlled through microprocessorEMI filterProtection against overheatingCerberus is equipped with a special INSULATION TRANSFORMER, which guarantees maximum safety to the user even in the most unfavourable situations.
CERBERUS 7,3 - 8 - 11 - 16kW
7,3-8-11-16kW INDUCTION + PLASMA + WELDER
Cerberus is also available with 7,3, 8, 11 and 16kW induction heater. More power for hea-vier works. If you already have a 5, 7,3, 8, 11 or 16kW induction heater, the welder and plasma cutter kit can be also provided to be assembled on your machine.
Liquid CoolingCERBERUS 500IHC500
5,4 kW 103 20 65 43x43x104continuous2520-50
m XY
Z
Kgltfreq. kHz
AMcm.m230 V 400 V
16A
CERBERUS 1000IHC1000
CERBERUS 2000IHC2000
11 kW
16 kW
Liquid Cooling
Liquid Cooling
105
106
20 96 50x50x100
25 150 51x60x111
continuous
continuous
16
25
15-50
15-50
/
/
16A
32A
*
*
* ON REQUEST DIFFERENT PLUGS
Liquid CoolingCERBERUS 800IHC800
8 kW
Liquid CoolingCERBERUS 700IHC700
7,3 kW 103
104
20 43x43x104
20 80 43x43x104
65continuous
continuous
32
16
20-50
15-5016A
32A /
* *
*
*
/
Plasma cutting up to 12mm 35% MAX 25A
Welding TIG (LIFT striking) and MMA
35% @ 140A
/
NEW!
NEW!
NEW!
® 20°C
Workshop equipment®
PHOENIX
5kW BATTERY INDUCTION HEATER
PHOENIX: REACH IMPOSSIBLE GOALS
It's the world's first induction heater powered by battery. With its 5kW of heating power and its small dimensions, Phoenix is the ideal tool to work o�site.Thanks to its extraordinary characteristics Phoenix can be considered unique in the world: with its 5kW of heating power it's the most powerful battery-powered machine on the market; its compact and light design make it incredibly versatile and easy transportable. It allows to carry out works of road assistance, dismantling of guard rails or works in places where electrical connection is not available, for example a cable car: this is an impossible goal for any other machine.
freq. kHzAM 20°C
10020-605 kW
mKglt
XY
Z
cm.m
4013 40x41x80without cable3 Liquid Cooling20 min battery life
+-
UNIQUE IN THE WORLD
cod: PHX05
Workshop equipment®
LIGHTNING 3000
12mm cut PLASMA CUTTER
TEK-WELD 3000
140A MMA + TIG WELDER
Cut metal up to 12mm thick in a fast way with our plasma cutter Lightning 3000 and you get a precise cut. You only have to connect it to the compressed air and it's ready to use.
TECHNICAL FEATURES:Dimensions and weight: 15x26x43cm - 10KGSupply: 230V@50/60HzCompensation ±10% power gridOvervoltage supply protectionAutomatic control of the pilot arcMax cut thickness: 12mmSecurity device for operatorDuty cycle: 35%-25A-90V; 60%-17A-86,8V; 100%-13A-85,2V
An e�cient welding machine ready and easy to use. You can use it both in TIG and in MMA mode, thanks to its specific torches interchangeable in few seconds.
TECHNICAL FEATURES:Dimensions and weight: 15x26x30cm - 8KgSupply: 230V@50/60HzMMA mode output current: 10-140ATIG mode output current: 10-140ADuty cycle (10 min at T=25°C): 35%@140AAnti-stickingContact startHot startMicroprocessor controlledEMI filterOverheating protection
AVAILABLE WELDING TOOLSWELDING KIT INCLUDING: – Helmet for standard welding – Hammer for beating weldings – Spatula with iron bristlesAUTO-DARKENING HELMET “LION KING 2” FOR WELDING
Workshop equipment®
BEARING 100
0,7kW BEARING INDUCTION HEATER
BEARING 300
2,7kW BEARING INDUCTION HEATER
Machine with small dimensions designed to heat bearings of big size up to a 20kg weight. It creates heat directly inside the metal thanks to magnetic induction: you need only few minutes to bring the bearing at the ideal shrink-fitting temperature, without the risk of overheating the metal.
TECHNICAL FEATURES:Power: 0,7kWSupply: 230V@50/60Hz, 2P+TDimensions and weight: 34x18x28cm - 14KgSupply cable length: 3mMax bearing weight: 5KgTemperature regulation on display
Machine with small dimensions designed to heat bearings of big size up to a 20kg of weight. It creates heat directly inside the metal thanks to magnetic induction: you need only few minutes to bring the bearing at the ideal shrink-fitting temperature, without the risk of overheating the metal.
TECHNICAL FEATURES:Power: 2,7kWSupply: 230V@50/60Hz, 2P+TDimensions and weight: 42x22x38cm - 18KgSupply cable length: 3mMax bearing weight: 20KgTemperature regulation on display
Workshop equipment®
Melt precious metals like gold and silver with induction heating, generating heat inside them in a fast and controlled way. Contrary to the welding torch which burns the metal surface, induction allows to heat without modifying the characteristics of the metal itself.
TECHNICAL FEATURES:Max power: 7,3kWDimensions and weight: 43x42x\05cm - 70KgSupply: 230V@50/60HzSupply cable length: 10mCooling system: liquid
An e�cient induction machine for braze-welding. Thanks to its pressure pincers it allows to weld electrical conductors, big transformers, engines and big generators.
TECHNICAL FEATURES:Dimensions and weight: 43x42x105cm - 65KgSupply: 230V@50/60HzSupply cable length: 10mCooling system: liquid
AURUM
7,3kW INDUCTION MELTING POT
JAWS
5,4kW COPPER STRIP WELDER
Workshop equipment®
Workshop equipment®
LASER LINER
TRUCKS WHEEL ALIGNMENT SYSTEM
Workshop equipment®
Wheel alignment systems for trucksWheel alignment systems for trucksLASER LINER is an alignment system for trucks, trailers and semi-trailers, designed to be extremely easy to use and to carry out your work in the least time possible. Using Teknel Laser Liner is so easy that you don't need to attend any specific course.
This new model is the perfect combination of technology and experience: it o�ers all the functionalities of the former version together with sophisticated electronics, which make this tool even more precise and reliable.
With Teknel Laser Liner you can measure toe, alignment, camber and caster of an axle in only 5 minutes, without lifting the vehicle or make any adjustment.
LIGHT ALLOY JAW WITH INTEGRATED LASER MODULE: 2 piecesHigh mechanical precision support with integrated laser module; it attaches on steel wheels with powerful magnets or with special supports on light alloy wheels
MAGNETIC TARGETS: 2 piecesAllow you to align wheels to the frame
FLOOR TARGETS: 2 piecesAllow you to measure TOE on all the axles with thelaser beam: one of the rods is equipped with a levelto control the working zone
KINGPIN SUPPORT: 1 pieceThe best system to align a semi-trailer
TRAILER DRAWBAR SUPPORT: 1 pieceThe best system to align a trailer
TURNTABLES: 2 piecesAllow you to steer the front wheels to measure caster;they sustain every vehicle, even at full load
MAGNETIC RODS: 6 piecesAllow you to attach the laser module to the wheelsROD EXTENSIONS: 6 + 6 piecesTo be used on the magnetic rods to operate on deeper wheels
MAGNETIC MATERIAL PLATES: 6 + 6 piecesAllow you to attach the laser module to light alloy wheels
STAFFS WITH CROSS: 2 piecesAllow you to take measures in di�cult parts of the frame, for both iron or light alloy
TIE RODS: 16 pieces in 4 sizesTo hold the laser modules on “problematic” wheels
TIE RODS SUPPORTS: 4 piecesThey adapt the tie rods to di�erent sizes of wheels
ALSO INCLUDED:2 laser battery chargers, outlet for charger, instructions, advertising table
Workshop equipment®
Liqu
id C
oolin
g
Liqu
id C
oolin
g
DRAG
ON
500
IHD
05
DRAG
ON
800
IHD
08
DRAG
ON
100
0IH
D10
00
DRAG
ON
200
0IH
D20
00
EXPE
RIEN
CE D
UAL
CO
REXP
22
5,4
kW
8 kW
11 k
W
16 k
W
22 k
W
EVO
LUTI
ON
Liqu
id C
oolin
g
IHD
EVO
3,7
kW
Liqu
id C
oolin
g
Liqu
id C
oolin
g
Liqu
id C
oolin
g
BUTT
ERFL
YLi
quid
Coo
ling
BFH
011
41,
8
DRAG
ON
FLY
-3D
F33
kW
DRAG
ON
FLY
DF1
0,4
kW
DRAG
ON
700
IHD
077,
3 kW
EXPE
RIEN
CEXP
2121
kW
TWIN
PO
WER
16+
16TW
IN16
32 k
W
33
33
63
103
103
104
105
106
106
106
102
X 6
DO
UBL
ELi
quid
Coo
ling
Air
Cool
ing
Air
Cool
ing
/9
39x2
8x19
/4
25x1
5x26
DRAG
ON
300
Liqu
id C
oolin
gIH
D03
3,7
kW20
-60
205
3943
x43x
626
3
5 39
43x4
3x62
2065
43x4
3x10
4
2043
x43x
104
2080
43x4
3x10
4
2096
50x5
0x10
0
2515
051
x60x
111
3019
010
1x64
x95
3019
0
25+2
525
0
PHO
ENIX
WIT
HO
UT
CABL
E/
//
/ / / / / / / / / / / / /
DO
UBL
ELi
quid
Coo
ling
DO
UBL
ELi
quid
Coo
ling
13
NEW
!
NEW
!
NEW
!
NEW
!
65
101x
64x9
5
101x
64x9
5
cont
inuo
us
cont
inuo
us
cont
inuo
us
cont
inuo
us
cont
inuo
us
cont
inuo
us
cont
inuo
us
cont
inuo
us
2 20
20-6
0
20-6
0
(DEN
T RE
MO
VER)
(4 A
CCES
SORI
ES)
PHX0
5
7
Liqu
id C
oolin
gBA
TTER
Y LI
FE20
MIN
UTE
S
20 20 100
25 32 16 16 25 32 32 50
20-6
0
20-6
0
20-6
0
20-5
0
20-5
0
15-5
0
15-5
0
15-5
0
15-5
0
10-5
0
15-5
0
3,5
kW
5 kW
3
/ / / / /
/ / / / /
/ / / / /
/ / / / / /
/ / /
20 m
inut
esM
AX P
OW
ER
20 m
inut
esM
AX P
OW
ER
4040
x41x
80
21x4
5x26
mX
Y
Z
Kglt
freq
. kH
zA
Mcm
.m
+-
SHU
CKO
230
V2P
+T+P
E 50
-60H
z
DRAG
ON
400
IHD
043,
7 kW
20-6
020
cont
inuo
us3
//
/10
2063
43x4
3x10
4BO
OST
EDLi
quid
Coo
ling
230
V40
0 V
16A
16A
32A
32A
32A
63A
16A
30 m
inut
esM
AX P
OW
ER
45 m
inut
esM
AX P
OW
ER
45 m
inut
es(a
cces
sorie
s ai
r co
olin
g 20
min
.) M
AX P
OW
ER
32A
/
on re
ques
t16
A*
**
* * * * * *
Liqu
id C
oolin
gCE
RBER
US
500
IHC5
005,
4 kW
103
2065
43x4
3x10
4co
ntin
uous
2520
-50
mX
Y
Z
Kglt
freq
. kH
zA
Mcm
.m
230
V40
0 V
16A
CERB
ERU
S 10
00IH
C100
0
CERB
ERU
S 20
00IH
C200
0
11 k
W
16 k
W
Liqu
id C
oolin
g
Liqu
id C
oolin
g
105
106
2096
50x5
0x10
0
2515
051
x60x
111
cont
inuo
us
cont
inuo
us
16 25
15-5
0
15-5
0
/ /
16A
32A
* *
* O
N R
EQU
EST
DIF
FERE
NT
PLU
GS
Liqu
id C
oolin
gCE
RBER
US
800
IHC8
008
kW
Liqu
id C
oolin
gCE
RBER
US
700
IHC7
007,
3 kW
103
104
2043
x43x
104
2080
43x4
3x10
4
65co
ntin
uous
cont
inuo
us
32 16
20-5
0
15-5
016
A
32A
/
**
* *
/
Plas
ma
cutt
ing
up to
12
mm
35%
MAX
25A
Wel
ding
TIG
(LIF
T st
rikin
g) a
nd M
MA
35
% @
140
A
/
NEW
!
NEW
!
NEW
!
Wor
ksho
p eq
uipm
ent
®
Wor
ksho
p eq
uipm
ent
®
20°C
20°C
SUMMARY TABLE Workshop equipment®
Workshop equipment®
Teknel s.r.l.Via Montello 48, Visco (UD), 33040 ITALY
Tel. English: +39 346 962 1411 / +39 370 124 4705Tel. Deutsch: +39 370 124 4705
Teknel: italian leader in mobile induction heating systems
www.teknelinduction.comMADE IN ITALY
LIGHT ALLOY JAW WITH INTEGRATED LASER MODULE: 2 piecesHigh mechanical precision support with integrated laser module; it attaches on steel wheels with powerful magnets or with special supports on light alloy wheels
MAGNETIC TARGETS: 2 piecesAllow you to align wheels to the frame
FLOOR TARGETS: 2 piecesAllow you to measure TOE on all the axles with thelaser beam: one of the rods is equipped with a levelto control the working zone
KINGPIN SUPPORT: 1 pieceThe best system to align a semi-trailer
TRAILER DRAWBAR SUPPORT: 1 pieceThe best system to align a trailer
TURNTABLES: 2 piecesAllow you to steer the front wheels to measure caster;they sustain every vehicle, even at full load
MAGNETIC RODS: 6 piecesAllow you to attach the laser module to the wheelsROD EXTENSIONS: 6 + 6 piecesTo be used on the magnetic rods to operate on deeper wheels
MAGNETIC MATERIAL PLATES: 6 + 6 piecesAllow you to attach the laser module to light alloy wheels
STAFFS WITH CROSS: 2 piecesAllow you to take measures in di�cult parts of the frame, for both iron or light alloy
TIE RODS: 16 pieces in 4 sizesTo hold the laser modules on “problematic” wheels
TIE RODS SUPPORTS: 4 piecesThey adapt the tie rods to di�erent sizes of wheels
ALSO INCLUDED:2 laser battery chargers, outlet for charger, instructions, advertising table