Catalogo team associated b4.2RS

I O

A CB

D

2:: Introduction

:: KIT Features

:: Additional

:: Other Helpful Items

Associated Electrics, Inc.26021 Commercentre Dr.Lake Forest, CA 92630

http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook

Customer ServiceTel: 949.544.7500Fax: 949.544.7501

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10 B4.2. Please take a moment to read through this manual to help familiarize yourself with these steps.

We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before you start to build.

Features in the B4.2 RS RTR:

• Fully assembled 2WD buggy based on the 5-time I.F.M.A.R. World Champion and 6-time R.O.A.R. National Champion platform

• XP SC500-BL Brushless water resistant speed control with LiPo cutoff

• Powerful Reedy 3300kV brushless motor

• XP 2.4 GHz 2-channel radio system with digital metal gear servo

• Water-resistant enclosed receiver box

• Blue anodized aluminum V2 coil-over shock absorbers

• Heavy-duty sealed gear differential with adjustable slipper clutch

• Factory finished Interceptor 2.0 polycarbonate body

• High traction tires pre-mounted on white hex drive wheels

• Molded composite chassis and battery strap that fits NiMH or LiPo battery packs

• Rugged steel turnbuckles for adjustable camber and front toe-in

• Vertical ball ends for roll center adjustments, front & rear

Your new B4.2 RS RTR comes factory assembled including radio gear, motor, and ESC. However, there are some items you will need to complete your kit (refer to catalog for suggestions):

• AA-size batteries for transmitter (x8)• 6 cell NiMH battery pack or 2 cell LiPo battery pack• Battery charger (we recommend a peak detection charger)

Tools included:• Allen wrenches #6950 (.050”, 1/16”, 3/32”, 5/64”)• 1.5mm allen wrench • Molded tools #6956• Camber gauge #1719 • Shock building tool #6429

• Silicone Shock Fluid (Refer to catalog for complete listings)• Body Scissors (AE Part # 1737) • Reamer / Hole Punch • Wire Cutters • Hobby Knife • FT Hex Wrenches (AE Part # 1655) • Needle Nose Pliers • Multi Tool (AE Part #7494)• Soldering Iron • Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105)

4/13

3:: Table of Contents

:: Notes

This symbols indicates a special note or instruction in the manual.

!There is a 1:1 hardware foldout page in the back of the manual. To check the size of a part, line up your hardare with the correct drawing until you find the exact size. Each part in the foldout has a number assigned to it for ordering replacement parts.

1................... Cover

2................... Introduction

3................... Table of Contents

4 - 5..............Steering Build

5 - 7............. Front Suspension Build

7 - 9............. Transmission Build

10 - 11.........Rear End Build

12.................Rear Hub Build

13 - 14........ Shocks Build

15 - 18........ Electronics Build

18 - 19....... Wheels, Tires and Body Install

19.................Servo Chart

20 - 21....... Tuning Tips

22 - 30....... Catalog

31................ Setup Sheet “Kit Setup”

32................ 1:1 Hardware “Fold Out”

33................ Setup Sheet “Blank”

34................ Back Cover

Associated Electrics, Inc.26021 Commercentre Dr.Lake Forest, CA 92630

http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook

Customer ServiceTel: 949.544.7500Fax: 949.544.7501

:: Steering Build - Step 2

:: Steering Build - Step 3

4:: Steering Build - Step 1

Remove bolt and washer, continue

assembly per instructions.

* With supplied wrench, tighten servo sacer bolt completely, until it

hits bottom. Do not overtighten.

* With supplied wrench, tighten servo sacer bolt completely.

Do not overtighten.

!

!

!

9659Servo saver

(lower)

9659Servo saver

(lower)

9659Servo saver

(upper)

9659Servo saver

(lower)

9610Servo saver

bolt

9610Servo saver

bolt

9610Servo saver

washer(upper)

9610Servo saver

washer(upper)

black grease

#6588

9610Servo saver

washer(lower)

9659Block

carrier bushing

22214-40 x 7/16

bhcs

9659Bellcrank

6272Dust cover

foam

9659Steering

rack

6276Ballstud.20 short (silver)

6276Ballstud.20 short (silver)

6272Dust cover

foam

9610Servo saver

washer(upper)

9610Servo saver

bolt

9657Heavy dutyservo saver

spring

x2

x2

x2

x2

x2

5:: Steering Build - Step 4

:: Front Suspension Build - Step 1


Install the C Clip into the groove

shown below.

!

Build 2 (1 left, 1 right) Build 2!!

7496B4 front axle, hex

39773/16x3/8bearing

9882C-clip, 3/16

Do not overtighten steering bolts. Make sure there is free

movement in the steering rack.

!

3856Steering

rack bushing

69254-40 x 1/2

shcs

69154-40 x 5/8

fhcs

9640Steering

bolt(left)

9659Steering

brace

x4

x3

x2

9640Steering

bolt(right)

9563Front

bulkhead

9560B4

chassis

9566Top plate

6272Foam dust cover

39773/16 x 3/8

bearing

73691/16”

universal roll pin

7497B4 wheel

hex adapter(thin)

44494-40 x 3/16aluminum

locknut

9880Steering blocks

hex style(left, right)

4187.030 washer

(nylon)

6277Ballstud.30 long(silver)

Build left and right sides!

!Align the C clip on

the front axles with the D shape

inside the steering blocks.

!

6:: Front Suspension Build - Step 3



9562Front

bumper

x269154-40x5/8

fhcs

96452-56 x 1/8

bhcs

72604-40 small

plain nut

9580Caster

block 25˚(left, right)

9622Kingpin

Build left and right sides!

6272Foam dust cover

3983Ballstud.30 short(black)

x296452-56x1/8

bhcs

7922Spacer

9622Hinge pin,front outer

9578B4 a-arms,

front

9564Front hinge pin brace

9621Hinge pin,front inner

43342-56x5/16

bhcs

x2x2

77384-40 x 7/8

shcs

9568B4 front

shock tower

62954-40

plain nut

6277Ballstud .30silver, long

x2

x2

x2

x2

9630Ballstud washer

6272Dust cover

foam

x2

#1596

thread lock

7:: Front Suspension Build - Step 6


:: Transmission Build - Step 1

Front Camber Turnbuckle1.26” (32.00mm)

1.44” (36.50mm)Steering Turnbuckle

Orient the notch to the left

throughout the car. It indicates

which end has the left hand threads!

!

7230ball cup(large)

7230ball cup(large)

62632.06”

turnbuckle

62632.06”

turnbuckle

x2

x2

black grease

#6588

black grease

#6588

black grease

#6588

9828Diff gear

cover

98880.5mm gear

diff shim 98302x8mm

round end pin

x2

x2

98313.6x0.7mm

o-ring

98314.7x1.42mm

o-ring

9830Outdrive

cup

Build two!

69244-40x3/8

shcs

x4

8:: Transmission Build - Step 2



9601Top shaft

9602Top shaft

spacer

9826Transmission case(1 left, 1 right)

3977Ball bearing

3/16x3/8

9361Idler gear

shaft

9360Idler gear

3977Ball bearing

3/16x3/8

9832Ball bearing10x16mm

x2

x2

x2

x2

Align pin with groove in sun gear

!

black grease

#6588

blac

k gr

ease

#6588

blac

k gr

ease

#6588

9828Diff gear52T, 48P

98880.5mm gear

diff shim

98302x8mm

round end pin

98314.7x1.42mm

o-ring

9829Sun gear

Align pin with groove in sun gear

!

black grease

#6588

black grease

#6588

black grease

#6588

9829Planet gear

shims

9829Planet gear

46752.5x6mm

fhcs

x4

x4

x2

x49829Sun gear

9829Cross pin

Use the 1.5mm allen wrench to tighten the 2.5x6mm fhcs on the

diff gear cover

Align flat spots

Ensure free outdrive rotation before

installation!

!

!

!

!

9831Diff gear

seal

9:: Transmission Build - Step 5



Compress spring first.

!

#1596

thread lock

69134-40x1 1/4

shcs

9600Motor plate

9587Wing mounts

(1 left, 1 right)

x2

x2

x2

69194-40 x 5/16

bhcs

69254-40 x 1/2

shcs

9630.030 alum.

ballstud washer

9819Motor guard

69284-40 x 1

shcs

x2

x3

x3

Compress spring first.

!x2x2

x2x29604Slipper hub

9603Slipper

pad

965181T 48Pspur gear

See page 20 for gear mesh, and slipper clutch

setting instructions!!

!

66295-40

locknut

9605Slipper spring

10:: Rear End Build - Step 1

:: Rear End Build - Step 2


92695-40x1/2

fhcs

x2

9621Hinge pin, rear inner

9582Rear B4 a-arms (1 left, 1 right)

96452-56x1/8

bhcs

9818Rear chassis

plate

9818Rear arm

mount (3+2)

x2

x2

x2

92695-40x1/2

fhcs

x4

6272Dust cover

foam

6277Ballstud.30 long(silver)

9630.030 alum.

ballstud washer

9564Rear chassis

brace

x2

x2 x2

96435-40x7/16

shcs

x2

11:: Rear End Build - Step 4



69224-40x1/2

fhcs

x2

9572Rear shock

tower

#1596thread lock

9572Rear shock

tower

#1596thread lock

72604-40 smallplain nut

x2

69274-40 x 3/4

shcs

x29644

5-40x9/16shcs

96435-40x7/16

shcs

x2 x2

69244-40x3/8

shcs69154-40x5/8

fhcs

x2

x2

12:: Rear Hub Build - Step 1

:: Rear Hub Build - Step 2

:: Rear Hub Build - Step 3

9671B4

dogbone

Build x2 (right and left side)

Orient the notch to the left

throughout the car. It indicates

which end has the left hand threads!

!

9622Hinge pin,rear outer

4187Spacer

Rear Camber Turnbuckle1.41” (36mm)

7230ball cup(large)

62632.06”

turnbuckle

x2

x2

x2


LEFT SIDE SHOWN

6272Dust cover

foam

73691/16

universal roll pin

7497B4 wheel

hex adapter(thick)

9584Rear hub carrier

(left, right)3983

Ballstud.30 short (black)

72604-40 smallplain nut

!Build left and right sides!

9622


96452-56x1/8

bhcs

5407O-ring

9670Rear axle

3977Ball bearing3/16 x 3/8

7377Bearing spacer

73683/16 axle

shim

x2

13:: Shocks Build - Step 1

:: Shocks Build - Step 2


Piston

1

FrontShock

FrontShock

FrontShock

RearShock

RearShock

RearShock

Remove spurs

7217Pivot ball

7217Pivot ball

7217Eyelet 7217

Eyelet4187

Downstopthin

1/32”

Piston number hereUse #1 = front shocksUse #1 = rear shocks

5407Red

o-ring

6465Shock piston

#1

6465Shock piston

#1

6299E-clip

6299E-clip

6299E-clip

6299E-clip

5407Red

o-ring

9680V2 RTR

front shock body 0.89”

stroke (blue)

9681V2 RTR rear shock body

1.18” stroke (blue)

7484Shock

internal spacer

6460Shock shaft 0.71” stroke

6459Shock shaft 1.02” stroke

7484Shock

internal spacer

6469Shock cap

o-ring

6469Shock cap

o-ring

7484Lower shock

seal cap

7484Lower shock

seal cap

14:: Shocks Build - Step 4



Use outside hole in

front arm!

!

6472Shock

mount nut

6472Shock

mount nut

* Shock Bleeding Steps:

1. Pull shock shaft down.2. Fill shock body 3/4 full with silicone fluid.3. Slowly move the shock shaft up and down to remove air from under piston.4. Wait for bubbles to come to surface.5. Fill shock body to top with silicone fluid.6. Place several drops of oil in the cap and on cap threads.7. Install cap and tighten completely.8. Slowly compress shaft all the way to the top. If there is pressure at the top of the stroke, there is too much oil or air. You must bleed it out. 9. Slowly pull shaft down.10. Unscrew the cap 3/4 turn and tilt the shock at a slight angle.11. Slowly compress the shaft to push out excess oil and air. You should see bubbles coming out from under the cap.12. With the shaft compressed, tighten the cap and re-check for pressure at the top of the stroke. If there is still pressure, repeat steps 9 thru11.Step 7Step 5-6Step 3-4Step 1-3

6441Shock cap

(molded)

Shock fluid

30wt #5422

Shock fluid

30wt #5422

6493Front spring

(brown)2.80lb

6481Rear

spring (black)1.74lb

6475Spring collar

6475Spring collar8846

Preload spacers

8846Preload spacers

6475Spring

cup

6475Spring

cup

FrontShock

RearShock .03

x1

.24

x1

.12

x1x1

.06

x1

.12

x1

.24

x1

.03

77384-40x7/8

shcs

6473Shock

bushing

6473Shock

bushing

Use inside hole in

rear arm!

!

69254-40x1/2

shcsFront x2 Rear x2

15:: Electronics Build - Step 1

:: Electronics Build - Step 2


9170Servo link

Leave a 2mm gap!

!

Offset the servo horn by 5-10 degrees

(approximately one notch)! (approximately one notch)!

7337Gold

washer

3981Ballstud, .20 black, short

6272Dust cover

foam

9180Servohorn

x4

x2x4

x2x2

7336Servo

spacers

69174-40x3/8

bhcs

315313x6mm

bhcs

6936Washer #4aluminum

825821T, 48P pinion

(w/setscrew)

Screw supplied with servo!

See page 19 for correct servo spacing on the

servo chart!!

7336Servo mount

x2Servo

Motor

x262924-40x3/8

fhcs




See page 20 for gear mesh setting

instructions!

7460Gear cover

(black)

7460Gear cover

button

62854-40x1/4

shcs

x2

!

!

!

!

9878Wire

grommet plug

Receiver

9878Receiver

box grommet

Receiver grommet plug can be removed if you use a personal transponder!

Install the ESC and servo wires into the wire

grommet before installing the grommet into the

receiver box!

You may need to reposi-tion the receiver in order

to get it to fit with the plugs installed and the receiver

box lid installed.Once you find a good fit,

use #6727 servo tape to install your receiver.

9877Receiver

box(bottom)

96435-40 x 7/16

shcs!



6727Servo tape

6727Servo tape

Speed Control(ESC)

Leave a 2.5mmgap!

!

!

96435-40 x 7/16

shcs

38625-40 x 1/8setscrew

6338Antenna and cap

9878Receiver box seal

x29877

Receiver box (top)

98794-40 x 1/2setscrew

9879Thumb knob

9793Battery strap (w/ foam pad)

x2

x2

Receiver(Rx)

Battery


:: Wheels / Tires and Body - Step 1


69538-32

LP steellocknut

x2

#1597

ca glue #1597

ca glue

x29695Buggy rear wheel hex,

white

9690Buggy front wheel hex,

white 9663B4.2 frontwheel/tire

pre-mounted(white)

9664B4.2 rearwheel/tire

pre-mounted(white)

x2

x2 x2

Carefully apply tire adhesive to the tire bead on

both sides.Do one side at a time, allow it to

dry before gluing the other side!

!

x269528-32

locknut, steel

To remove your battery pack from the vehicle, twist the thumb knobs to the unlocked position, remove the battery strap, and then remove the battery.When you install the battery, make sure the thumb knobs are locked before operation.

You may need to adjust the height of the thumb knobs and/or the set screws that the thumb knobs are attached to for your specific battery pack type.

Unlocked Locked

19:: Wheels / Tires and Body - Step 3


:: Servo Chart

Steering Servo ChartAssociated

* Not all servo’s are listed* Make sure servo linkage clears the servo through full travel in both directions. Use #7336 servo spacers to adjust the servos position (to make the steering link as straight as possible)

XP-1015, XP-1313 F

F

F

A

A

H

H

J

J

J

# 9180servo arm

94102

HS-5625MG, HS-5645MG, HS645MG

Z4750, Z2750

Z250, Z550

S9204, S9250, S9450

S9404

94257, 94258, 94357, 94358, 94452, 94453, 94755

HS-965, HS-985MG, HS-5965, HS-5985MG

PS-401, PS-2001, PS-2004, PS-2015, PS-2173, PS-2174, PS-2123, PS-2143, PS-2144

Airtronics

Airtronics

Hitec

Hitec

JR

JR

Futaba

Futaba

KO

x29587Wing shims

69294-40x3/8

shcs(w/hole)

x26332Body clips

RTR Wing(#9682 - Red)(#9683 - Blue)

*Racers Tip:Instead of using the included body clips (#6332) and the #6929 SHCS for the top

plate to install your body, you can use hook and loop tape

on the inside of the body, and the sides of the chassis to

keep your body in place!

!

RTR Body(#9682 - Red)(#9683 - Blue)

Front

20:: Tuning TipsTips for Beginners:

Before making any changes to the standard setup, make sure you can get around the track without crashing. Changes to your vehicle will not be beneficial if you can’t stay on the track. Your goal is consistent laps.

Once you can get around the track consistently, start tuning your vehicle. Make only ONE adjustment at a time, testing it before making another change. If the result of your adjustment is a faster lap, mark the change on the included setup sheet (make adddtional copies of the sheet before writing on it). If your adjustment results in a slower lap, revert back to the previous setup and try another change.

When you are satisfied with your vehicle, fill in the setup sheet thoroughly and file it away. Use this as a guide for future track days or conditions.

Peridicaly check all moving suspension parts. Suspension components must be kept clean and move freely without binding to prevent poor and/or inconsistent handling.

Motor Maintenance:

Brushed motors require frequent maintenance to keep performance levels at their maximum. Between runs and after letting the motor cool completely, inspect the brushes to ensure that they are moving freely in their holders. Remove the springs and slide the brushes in and out of their holders checking for any resistance or rough spots. If found, remove the brush and carefully wipe it clean. Removing buildup will allow the brush to slide freely and create maximum contact with the commutator resulting in maximum power output.After every 3-5 runs, remove the brushes from their holders and inspect the tips for wear or burning. If there is noticeable wear (less than 75% of the brush remaining), it is best to cut the commutator and replace the brushes with a new pair. If the tips become a burned blue color, the lubricant in the brush has been burned away and new brushes should be installed.Occasionally, the motor should be cleaned with a soft brush to prevent dirt build up around the brush hood area and ball bearings. At this time, it is a good idea to add one drop of bushing / bearing oil to each bushing or ball bearing.

If using a brushless motor, please refer to the motor manufacturer’s guidelines for proper maintenance.

Slipper Clutch:

The assembly instructions give you a base setting for your clutch. Turn the nut on the shaft so that the end of the top shaft is even with the outside of the nut. At the track, tighten or loosen the nut in 1/8 turn increments until you hear a faint slipping sound for 1-2 feet on takeoffs. Another popular way to set the clutch is to hold both rear tires firmly in place and apply short bursts of throttle. If the clutch is properly set, the front tires should lift slightly up off the surface.

Motor Gearing:

Proper motor gearing will result in maximum performance and run time while reducing the chance of overheating and premature motor failure. The gear ratio chart lists recommended starting gear ratios for the most widely used motor types. Gear ratios will vary depending upon motor brand, wind, and electronic speed control. Consult your motor and electronic speed control manufacturers for more information. Team Associated is not responsible for motor damage due to improper gearing. * These gearings are for use with advanced timing speed control settings!

Set The Gear Mesh:

You should be able to rock the spur gear back and forth in the teeth of the pinion gear without making the pinion gear move. If the spur gear mesh is tight, then loosen the #31532 screws and move the motor away, then try again. A gear mesh that is too tight or too loose will reduce power and damage the gear teeth.

27T Reedy Stock19T Reedy Super Stock

17.5 Reedy Sonic Brushless *17.5 Reedy Sonic Brushless

13.5 Reedy Sonic Brushless *13.5 Reedy Sonic Brushless10.5 Reedy Sonic Brushless9.5 Reedy Sonic Brushless8.5 Reedy Sonic Brushless7.5 Reedy Sonic Brushless6.5 Reedy Sonic Brushless

3300kV Brushless3900kV Brushless4900kV Brushless6100kV Brushless

232223322230242322212121211918

818178758175818181818181818181

9.15:19.57:18.82:16.09:19.57:16.50:18.78:19.15:19.57:1

10.02:110.02:110.02:110.02:111.08:111.70:1

Motor Pinion Spur FDRB4.2 Gear Ratio Chart (Internal Gear Ratio 2.60:1)

21:: Tuning Tips (cont.)Front Camber Links:

Changing the length of the camber link is considered a bigger step than adjusting the ball end height on the tower. Shortening the camber link (or lowering the ball end) will give the front end less roll and quicken steering response. Lengthening the camber link (or raising the ball end) will give the front more roll and slower steering response. Longer camber links are typically used on high grip tracks and shorter links tend to work better on medium-grip loose tracks.

*Raise or lower the ball end by adding

or subtracting washers here

!

Caster:

Caster describes the angle of the kingpin as it leans toward the rear of the vehicle. Positive caster means the kingpin leans rearward at the top. The supplied 30° caster blocks (#7922) are recommended in most cases. For less corner entry steering and more exit steering, try the optional 25° blocks (#7919).

Rear Camber Link:

Changing the length of the camber link is considered a bigger step than adjusting the ball end height on the rear chassis brace. Shortening the camber link (or lowering the ball end) will give the rear end less roll and the car will tend to accelerate or “square up” better. Lengthening the camber link (or raising the ball end) will give the rear more roll and more cornering grip. Longer camber links are typically used on high grip tracks, while shorter links tend to work better on medium grip loose tracks. The kit setting is the best compromise of cornering grip and acceleration.

Wheelbase Adjustment:

You have three options for rear hub spacing, Forward, Middle, & Back. The kit setting provides the most rear traction, and will be used most often. For improved handling in bumps or rhythm sections, try moving the hubs to the Middle or Back position. This can also make the car handle better in 180° turns.

Rear Camber:

Camber describes the angle at which the tire and wheel rides when looked at from the back. Negative camber means that the tire leans inward at the top. A good starting camber setting is -1°. Use the included #1719 camber gauge to set your camber. Adding a small amount of positive camber, where the top of the tire is leaning out, will tend to improve straight-line acceleration on loose tracks.

Anti-Roll Bars:

The optional #9635 rear anti-roll bar kit (also called the “swaybar”) allows you to add roll resistance to the rear end with minimal effect on handling over bumps and jumps. It is an especially helpful tuning item on high-grip tracks (try the gold bar). The silver and black anti-roll bars are typically used on medium-grip loose tracks.

Ride Height:

Ride height is the distance from the ground to the bottom of the chassis.The standard front ride height setting is with the front arms level (reffered to as “arms level”) or 24mm (Ride Height Gauge #1449). Check the ride height by lifting up the entire car about 8-12 inches off the bench and drop it. After the suspension “settles” into place, measure ride height (Ride Height Gauge #1449). Raise or lower the shock collars as necessary so that the left & right arms appear to be level.

The rear ride height setting you should use most often is with the outdrive, driveshaft, and axles all on the same imaginary horizontal line (reffered to as “bones level”) or 24mm (Ride Height Gauge#1449). Check the ride height by lifting up the entire car about 8-12 inches off the bench and drop it. After the suspension “settles” into place, measure ride height (Ride Height Gauge #1449). Raise or lower the shock collars as necessary so that the left & right driveshafts appear to be level.

Front Camber:

Camber describes the angle at which the tire and wheel rides when looked at from the front. Negative camber means that the tire leans inward at the top. A good starting camber setting is -1°. Use the included #1719 camber gauge to set your camber. Positive camber, where the top of the tire is leaning out, is not recommended.

*Testing camber with camber gauge

!

*Raise or lower the ball end by

adding or subtracting

washers here

*Spacers to the rear will place hubs for-ward, shortening the wheelbase

*Front arms should be in a straight line when ride height is set at “arms level”

*CVA bones should be in a straight line when ride height is set at “CVA bones

level”

!

!

!

!

*Spacers to the rear

22:: Optional Ball Differential65736574657565816582658976647666767798529853

261

121212111

Diff Thrust Washer & BoltPrecision Diff Thrust Balls, 5/64”Locking T-Nut, Diff Thrust Bolt, & Cover3/32” Carbide Diff BallsDiff Thrust SpringBall Bearing, 5/32 x 5/16” unflangedDiff Gear 52TDiff Drive Rings, 2.60:1B4 / T4 / GT Diff Rebuild KitSC10 Ball Diff OutdrivesSC10 Complete Ball Differential

9853

:: Shocks

:: Springs

:: Shock Fluid

5407629964416459646064656466646964736475

6925721774847738884696809681

1581

1582

649364946496649782326478648064816482743474357436

81241111441

62161

Pr.Pr.

1

1

Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.

Red O-Rings 1/8” E-ClipsShock Cap, MoldedShock Shaft, 1.02” strokeShock Shaft, 0.71“ strokeShock Pistons, 4 eachShock Down Stops, SetBlack Shock Cap O-RingShock BushingsPreload Spacers 5 thicknesses, Collars & Cups, 4 each4-40 x 1/2“ SHCSShock Rod Ends / Plastic Pivot BallsV2 1/10 Shocks Rebuild Kit4-40 x 7/8” SHCSPreload Spacers, 4 eachV2 RTR Front Shock Bodies 0.89“V2 RTR Rear Shock Bodies 1.18”

Factory Team Buggy Front Spring Kit. I pr of green, silver, blue, black front springsFactory Team Truck Rear Spring Kit. I pr of green, silver, blue, gold, red rear springsFront Buggy Spring Brown 2.80 lb (Kit)Front Buggy Spring Green 3.50 lbFront Buggy Spring Silver 3.85 lbFront Buggy Spring Blue 4.20 lbFront Buggy Spring Black 3.20 lbRear Spring Silver 2.10 lbRear Spring Green 1.90 lbRear Spring Black 1.74 lb (Kit)Rear Spring Gray 2.33 lbRear Spring Blue 2.55 lbRear Spring Gold 2.75 lbRear Spring Red 2.95 lb

5420542154225423542454255426542754285429543054315432543354345435543654375438

2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.2oz.

10 Weight Silicone Shock Fluid20 Weight Silicone Shock Fluid30 Weight Silicone Shock Fluid40 Weight Silicone Shock Fluid22.5 Weight Silicone Shock Fluid80 Weight Silicone Shock Fluid27.5 Weight Silicone Shock Fluid15 Weight Silicone Shock Fluid25 Weight Silicone Shock Fluid35 Weight Silicone Shock Fluid45 Weight Silicone Shock Fluid55 Weight Silicone Shock Fluid32.5 Weight Silicone Shock Fluid37.5 Weight Silicone Shock Fluid42.5 Weight Silicone Shock Fluid50 Weight Silicone Shock Fluid60 Weight Silicone Shock Fluid70 Weight Silicone Shock Fluid47.5 Weight Silicone Shock Fluid

6441 54077484

7484

8846

6475

7217

6475

6466

6299

62996465

54076469

6460 (F)6459 (R)

7738 (F)6925 (R)

9680 (F)9681 (R)

(RTR)

:: Slipper Clutch / Pinions628566297460

7461

96039604960596509651

965296539654

825382548255825682578258

8259826082618263826482658266826782688269827082718272

1261

1

21111

111

111111

1111111111111

4-40 x 1/4 SHCS5-40 LocknutsMolded B4/T4 Gear Cover, black (Kit)Molded B4/T4 Gear Cover, clearB4/T4 Slipper PadSlipper PlateSlipper Spring75T 48P Spur Gear81T 48P Spur Gear(Kit)78T 48P Spur Gear84T 48P Spur Gear87T 48P Spur Gear

16T 48P Pinion Gear17T 48P Pinion Gear18T 48P Pinion Gear19T 48P Pinion Gear20T 48P Pinion Gear21T 48P Pinion Gear(Kit)22T 48P Pinion Gear23T 48P Pinion Gear24T 48P Pinion Gear 26T 48P Pinion Gear27T 48P Pinion Gear28T 48P Pinion Gear29T 48P Pinion Gear30T 48P Pinion Gear31T 48P Pinion Gear32T 48P Pinion Gear33T 48P Pinion Gear34T 48P Pinion Gear35T 48P Pinion Gear

9604

9604

6629

7460

7460

6285

96059651 (81T)

9603

6575

6582

9852

7666

6589

6581

7664

6589

7666

9852

6573

65736574

6575

6575

23

:: Differential Fluids5450545154525453545454555456545754585459

1111111111

Silicone Diff Fluid 1,000CSTSilicone Diff Fluid 2,000CSTSilicone Diff Fluid 3,000CSTSilicone Diff Fluid 5,000CSTSilicone Diff Fluid 7,000CSTSilicone Diff Fluid 10,000CSTSilicone Diff Fluid 20,000CSTSilicone Diff Fluid 30,000CSTSilicone Diff Fluid 60,000CSTSilicone Diff Fluid 100,000CST

:: Turnbuckles / Servo3981626362726292691772307336733791709180

62

2866

121411

Ballstud .20” Black (short)Turnbuckle, 2.06”Foam Ballend Dust Cover4-40 x 3/8” FHCS4-40 x 3/8” BHCSBallcups, largeServo Mount SetGold WasherB4 / T4 Servo LinkServo Horns Set

Steering servo link

Front Camber TurnbuckleSteering Turnbuckle

Rear Camber Turnbuckle

9170

6272

9180

6292

7336

7337

7337

6917

6917

3981

72307230

91709170

6263

:: Gear Differential9827982898299830983198329888

Complete Gear DiffDiff Gear and CoverGear Diff RebuildGear Diff Outdrives, SetGear Diff O-Ring Set10x16mm Bearing0.5mm Gear Diff Shim

1111122

982998289828

98289828

9830

9830 9830

9830

9829

9829

9831

9831

9831

9831

9831

9888

9888

9832

98329828

9828

:: Battery Strap92389793

11

Foam Battery Spacers, SetB4.1 RTR Battery Strap Set

9238

9238

9238

9793

9793

9793

9793

9793

9793

:: Front Arm

:: Rear Arm

3977398341874449627262776925695372607369749674979578958096219622964598809882

26

125

28466

12421

Pr.Pr.118

Pr.6

3977398341875407627269527260736873697497958295849622964596709671

26

12 8

286

121441

Pr.Pr.1811

Ball Bearing 3/16” x 3/8”Ballstud .30” Black (short).030 Nylon Washers4-40 Aluminum LocknutFoam Ballend Dust CoversBallstud .30 Silver (short)4-40 X 1/2” SHCS8-32 Low Profile Locknut, steel4-40 Plain Nut1/16” Universal Roll PinsB4 Front Axle, hexB4 Wheel Hex Adapter SetFront A-Arm B4Caster Block, 25° (left & right)Inner Hinge Pin SetOuter Hinge Pin Set2-56 x 1/8” BHCSSteering Block, Hex C-Clip, 3/16”

Ball Bearing 3/16 x 3/8”Ballstud .30” Black (short).030 Nylon WashersRed O-RingFoam Ballend Dust Cover8-32 Locking Nut, Steel4-40 Plain Nut3/16” Axle Shims1/16” Axle Roll PinsB4 Wheel Hex Adapter SetB4 Rear A-Arms (L&R)B4 / T4 RR Hub Carrier (L&R)B4 Outer Hinge Pin Set2-56 x 1/8” BHCS3/16” Rear AxleB4 RTR Dogbone

24

96229645

9582

6952

9670

6272

5407

9671

3983

7260

4187

4187

3977

3977

7368

7497

7377

7369

9584

95807922

9622

9622

9621

9645

9645

9645

6925

9578

7496

9882

6272

6272

6277

4187

9880

39773977

6953

7497

7369

3983

7260

4449

25:: Front Shock Tower

:: Rear Shock Tower

62726277647264736924773895689630

28444661

10

6332647264736915692774139572958796439644

6446661166

Foam Ballend Dust CoversBallstud .30 Silver (short)4-40/5-40 Plastic NutShock Bushing4-40 x 3/8” SHCS4-40 x 7/8” SHCSB4 Front Shock TowerBallstud Washer

Body Clips4-40/5-40 Plastic NutShock Bushing4-40 x 5/8” FHCS4-40 x 3/4” SHCS4-40 x 3/4 BHCSB4 Rear Shock TowerB4 / T4 Wing Mount / Shim Set5-40 x 7/16” SHCS 5-40 x 9/16” SHCS

6332

6332

6332

6472

6472

9587

9587

9587

9587

95729643

9643

9644

9644

69156915

6272

6272

6473

6473

6473

7738

6927

6927

77389568

6277

6277

9630

9630

6924

6924 6924

6924

6295

6295

6295

6295

6472

6472

:: Wheels966396649690969196959696

222222

B4.2 Front Wheel/Tire Pre Mounts (white)B4.2 Rear Wheel/Tire Pre Mounts (white)Buggy Front Wheel, hex, whiteBuggy Front Wheel, hex, yellowBuggy Rear Wheel Hex, whiteBuggy Rear Wheel Hex, yellow

96959690

9663

96639664

9664

26

:: Transmission3977691369196922692469256928693693609361960096019602963098199826983231531

2666666

1011111

101126

Ball Bearing, 3/16” x 3/8“4-40 x 1 1/4” SHCS4-40 x 5/16” BHCS4-40 x 1/2” FHCS4-40 x 3/8” SHCS4-40 x 1/2” SHCS4-40 x 1” SHCS#4 Washer, AluminumIdler Gear, moldedIdler Gear ShaftB4/T4 Motor PlateB4/T4 Top ShaftB4/T4 Top Shaft SpacerBall End WasherMotor GuardSC10 Transmission Case (left & right)Ball Bearing, 10 x 16mm3 x 6mm BHCS

:: Steering22213856627262766925692995669610964096579659

61

2866411111

4-40 x 7/16” BHCSSteering Bushings, SetFoam Ball end Dust CoversBallstud .20” Silver (short)4-40 x 1/2” SHCS4-40 X 3/8” SHCS, w/holeB4 / T4 Top PlateServo Saver / Steering HardwareB4 / T4 Steering Bolt, left & rightB4 / T4 HD Servo Saver SpringB4 / T4 Steering Set. Includes Rack,Bellcrank, Servo Saver, Steering Brace

3856

9610

9610

96106727

6727

62766276

62769657

9566

6925 6925

6929

6925

9659

9659

9659

9659

9659

9659

2221

2221

96409640

3856

3856

3856

9600

315316936

6936

6924

6924

6922

6922

9819

69196919

3977

3977

9602

9832

9832

9360 9361

9601

9826

9826

69259630

9630

6928

6928

6913

27:: Chassis

386243346272627763386915926995609562956395649621963096439645981898779878

68

28416611111

1068111

5-40 x 1/8” Set Screw2-56 x 5/16” BHCSFoam Ballend Dust CoverBallstud .30” Silver (long)Antenna Tube (black)4-40 x 5/8” FHCS5-40 x 1/2” FHCSB4 Chassis, CompositeFront BumperB4 / T4 / GT2 Front BulkheadRR / FR Hinge BraceInner Hinge Pin Set.030 Ballstud Washer5-40 x 7/16” SHCS 2-56 x 1/8” BHCSRear Arm Mount / Chassis PlateReceiver BoxReceiver Box Seals

9643

9643

3862

9643

6338

6338

9877

9877

9878

9878

11068111

Inner Hinge Pin Set.030 Ballstud Washer5-40 x 7/16” SHCS 2-56 x 1/8” BHCSRear Arm Mount / Chassis PlateReceiver BoxReceiver Box Seals

96439643

98779877

98789878

98789878

6272

6272

9643

9643

6277

6277

9630

9630

9564

4334

4334

9564 9563

9560

69156915

691569159562

9269

9818

9818

9645

9621

9621 9645

:: Lubes & Adhesives / Misc.1105159615976588659166366727

1111112

FT Green Slime Shock LubeFT Locking AdhesiveFT Tire Adhesive, mediumBlack Grease - 4ccS.Diff Lube - 4ccSilicone Grease - 4ccServo Tape

:: XP Electronics291072912529126291272913329134291352913829139291422914329144291452916629167291682920929210292112921229214292152921629251

111111111111111111111111

S1903 Metal Gear SetS1903MG ServoS2008MG ServoXP DS2008/S2008 Metal Gear SetXP DS1903 ServoXP DS1903MG ServoXP DS2008MG ServoXP SC500 Brushless ESCXP SC900-BL Brushless ESCXP ESC Fan OptionXP SC700-BL Brushless ESCXP SC1200 Brushless ESCXP SC1300 Brushless ESCXP DS1313 Digital ServoXP DS1015 Digital ServoXP DS1510MG Digital ServoGear Set, DS1313Gear Set, DS1015Servo Case , DS1313 / DS1015Accessory Pack, DS1313 / DS1015TRS 403-SSi ReceiverXP2G 2.4GHz Radio SystemXP3G 2.4GHz Radio SystemXP DS1505MG Digital Servo

:: Body and Decals961496589675967696829683969297729790979197929782

111111111111

B4 Clear Body & WingB4 Decal SheetB4 Painted Body, Flames, Blue BackgrouondB4 Painted Body, Flames, Red BackgroundB4.2 RTR Body and Wing, RedB4.2 RTR Body and Wing, BlueB4 Vortex Body + Wings Set, clearHigh Downforce Wing 6.5”B4.1 RTR Body, Blue, with spoilerB4.1 RTR Body, Green, with spoilerB4.1 Body Clear, with spoilerB4.2 Decal Sheet

28:: Factory Team and Option Parts140614091585165417341735173617701777177817791780178117873971690669376943738174857486748779227990956195659567956995739577957995839586959295939594959795989599

9600B96239635

963696559665967296739677967997399755978997959796979797989799986498659866986798729890989199179918312373128631327911759117691177

Pr.Pr.Pr.41046141

Pr.44

Pr.42661

Pr.11

Pr.111111

Pr.Pr.Pr.1

Pr.Pr.1

Pr.Pr.11

Pr.1

111

Pr.Pr.Pr.11

Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.122

Pr.Pr.Pr.

4ea.2 ea.

112

FT Ti Turnbuckle, 2.00” (blue)FT Ti Turnbuckle, 1” (sway bar) (blue)FT B4 Aluminum Trailing AxleFT Solid Axle PinsFT Blue Body Clip, 4 long, 6 shortFT Blue Body Clip, longFT Blue Body Clip, shortFT Milled Aluminum Motor Plate, (blue)Blue Aluminum Shock Ball Ends with EyeletsFT Milled Aluminum Motor Plate, (black)FT Servo Mounts, blue aluminumFT Blue Alum. Threaded Shock Bushings (standard)FT Blue Alum. Threaded Shock Bushings (short)FT Battery Strap Thumb ScrewsSteering Rack BearingsBall Bearing, PTFE Sealed 3/16 x 3/8”FT 4-40 Aluminum Locknuts (blue)FT 8-32 Aluminum Locknuts (blue)CVD Rebuild KitFT V2 Slipper HubsFT V2 Slipper Spring and WasherArm Mount Set (2.5, 3, 3.5, 4 deg)Caster Block 30 deg, (left & right)Aluminum Front BulkheadB4 Chassis Carbon, short chassisChassis Brace, Hinge Pin Brace, CarbonTop Plate, CarbonFront Shock Tower B4 CarbonRear Shock Tower Carbon B4Steering Blocks, Inline (B4 req. #9623)Front A-Arm B4 CarbonRear A-Arm B4 CarbonBattery Strap Carbon, B4 (short chassis)Caster Block 20 deg, (left & right)FT Caster Block, 30 deg, (left & right)Battery Strap Woven Carbon, B4 (short chassis)CVD Axle Bones, B4CVD Axles, B4 / T4CVD Set, B4FT Aluminum Motor Plate (blue)FT B4 Front Inline Axle (req. #9577)B4 / T4 Sway Bar Kit. Includes color coded bars,soft (black), med (silver), hard (gold)B4 +8mm Conversion KitB4 Full Carbon Set, (short chassis)FT B4 / T4 Aluminum Hinge Pin BraceFT CVA Bone, B4B4 Shiny CVD DogboneFT CVA Set, B4B4/T4 Aluminum Bellcrank SetSlipper SpringCVA Axle, Rear (B44, B4, T4, SC10)FT Titanium Front Axles, SC10 / B4Ti Nitride Ballstuds 4-40 x 0.20” LongTi Nitride Ballstuds 4-40 x 0.30” LongTi Nitride Ballstuds 4-40 x 0.40” LongTi Nitride Ballstuds 4-40 x 0.20” ShortTi Nitride Ballstuds 4-40 x 0.30” ShortFT Aluminum Hub, 0 degFT Aluminum Hub, 0.5 degFT Aluminum Hub, 1 degFT Aluminum Hub, 1.5 degFT Aluminum Hub Tower Set12mm Alum. Clamping Wheel Hex, Buggy Rear12mm Alum. Clamping Wheel Hex, Buggy FrontAluminum Hub A, CarbonAluminum Hub Tower B, GraphiteCVA Pin Retaining ClipFT Ballstud Washer, aluminum (1mm, 2mm)VCS3 Shock Bottom Cap and O-RingFT VTS Slipper ConversionVTS Slipper HousingVTS Slipper Pads

:: Reedy Motors and ESC’s

:: Factory Team and Option Parts cont.

231232233234235236237238239240241242243244245246908920921922923954955956957958965966967983984985986987

91178911799129991301913039130491305913069130891309913109131491316913259132691327913289132991330913319133291333913349133591336913379133891339913409134191342913439134491345

1111111111111111111111111111111111

11222211

4 ea.1

4 ea.22

Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.Pr.11111

Sonic 540 Mach 2 21.5 Competition Brushless MotorSonic 540 Mach 2 17.5 Competition Brushless MotorSonic 540 Mach 2 13.5 Competition Brushless MotorSonic 540 Mach 2 10.5 Competition Brushless MotorSonic 540 Mach 2 9.5 Competition Brushless MotorSonic 540 Mach 2 8.5 Competition Brushless MotorSonic 540 Mach 2 8.0 Competition Brushless MotorSonic 540 Mach 2 7.5 Competition Brushless MotorSonic 540 Mach 2 7.0 Competition Brushless MotorSonic 540 Mach 2 6.5 Competition Brushless MotorSonic 540 Mach 2 6.0 Competition Brushless MotorSonic 540 Mach 2 5.5 Competition Brushless MotorSonic 540 Mach 2 5.0 Competition Brushless MotorSonic 540 Mach 2 4.5 Competition Brushless MotorSonic 540 Mach 2 4.0 Competition Brushless MotorSonic 540 Mach 2 3.5 Competition Brushless MotorReplacement Rotor 540-SL540-SL Brushless Motor 3300kV540-SL Brushless Motor 3900kV540-SL Brushless Motor 4900kV540-SL Brushless Motor 6100kVSonic 540 Stock Rotor 12.3 x 24.2 (7.25)Sonic 540 Stock Rotor 12.3 x 25.0 (7.25)Sonic 540 Stock Rotor 12.5 x 25.0 (7.25)Sonic 540 Modified Rotor 12.2 x 25.0 (5.0)Sonic 540 Modified Rotor 12.5 x 25.0 (5.0)Reedy 540-SL 3300kV/XP SC700-BL ESC ComboReedy 540-SL 3900kV/XP SC700-BL ESC ComboReedy 540-SL 4900kV/XP SC700-BL ESC ComboReedy 540-SL 3300kV/XP SC1200-BL ESC ComboReedy 540-SL 3900kV/XP SC1200-BL ESC ComboReedy 540-SL 4900kV/XP SC1200-BL ESC ComboReedy 540-SL 6100kV/XP SC1200-BL ESC ComboSonic 540 Modified Rotor 13.0 x 25.0 (5.0)

VTS Slipper PlateFT VTS Slipper Hub, outer12X23mm FT Shock Bodies (front)12X31mm FT Shock Bodies (rear)12MM Shock Cap12MM Threaded Collar and O-Ring21X3mm TiN Shock Shaft (front)27.5X3mm TiN Shock Shaft (rear)12MM Shock Pistons, (1.5, 1.6, 1.7)12MM Shock Rebuild Kit12MM Shock Spring Cups (+0mm, +5mm, +9mm)12MM Shock (B4/B44 Front)12MM Shock (B4/B44 Rear)12MM Front SPRING BRN 2.8512MM Front SPRING BLK 3.0012MM Front SPRING GRN 3.1512MM Front SPRING WHT 3.3012MM Front SPRING GRY 3.4512MM Front SPRING BLU 3.6012MM Front SPRING YLW 3.7512MM Front SPRING RED 3.9012MM Front SPRING ORN 4.0512MM Front SPRING PRL 4.2012MM Rear SPRING BLK 1.9012MM Rear SPRING GRN 2.0012MM Rear SPRING WHT 2.1012MM Rear SPRING GRY 2.2012MM Rear SPRING BLU 2.3012MM Rear SPRING YLW 2.4012mm Big Bore Front Soft Spring Kit12mm Big Bore Front Medium Spring Kit12mm Big Bore Front Hard Spring Kit12mm Big Bore Rear Soft Spring Kit12mm Big Bore Rear Medium Spring Kit

:: Reedy Batteries

:: Reedy Accessories

302303309602628681682683684730731732734736738

247248249250604607609610654655656657658659660661662663664716974975978979980981982992

111111111111111

1111111111111111111111111111

AA Alkaline 1.5V (4)AA 2700mAh NiMH 1.2V Rechargeable (4)LiPo 65C 7000mAh 7.4VLiPo 65C 4100mAh 7.4V ShortyLiPo 60C 5500mAh 7.4V Wolfpack 2400mAh 7.2V w/DEANS® connectorWolfpack 3000mAh 7.2V w/DEANS® connectorWolfpack 3600mAh 7.2V w/DEANS® connectorWolfpack 4200mAh 7.2V w/DEANS® connectorWolfpack LiPo 3000mAh 7.4V 25C w/DEANS®Wolfpack LiPo 3300mAh 7.4V 35C w/DEANS®Wolfpack LiPo 3400mAh 7.4V 35C w/DEANS®Wolfpack LiPo 6500mAh 7.4V 25C w/DEANS®Wolfpack LiPo 5000mAh 7.4V 25CWolfpack LiPo 3800mAh 7.4V 25C Shorty

Sonic 540 Mach 2 Sensor w/bearingSonic 540 Mach 2 Steel Bearing SetSonic 540 Mach 2 Ceramic Bearing SetSonic 540 Mach 2 Insulator Set526-S AC/DC 2S-6S LiPo/LiFe ChargerCharge Harness 2S Standard Pack 4mmTAM to DEANS® charge adapter447-S AC/DC NiMH Peak Charger4.0mm plugs (2M, 2F) 4.0mm plugs (2M, 10F) 4.0mm plugs (10F)4.0mm plugs (100F)4.0mm plugs (10M)4.0mm plugs (30M)3.5mm plugs (3M, 3F)3.5mm plugs (10F)3.5mm plugs (100F)3.5mm plugs (10M)3.5mm plugs (30M)Reedy 09 Decal Set540-SL/550-SL Steel Bearing Set540-SL/550-SL Ceramic Bearing SetFlat Sensor Wire 70mmFlat Sensor Wire 110mmFlat Sensor Wire 150mmFlat Sensor Wire 200mmFlat Sensor Wire 270mmSonic 540 Rotor Spacers

29

:: LRP Speed ControlsLRP80230LRP80250LRP80960LRP80970

1111

Spin Super BrushlessSpin Pro BrushlessFlow CompetitionFlow Works Team

:: LRP Chargers, Power Supply, BalancerLRP41281LRP41555LRP42103LRP42104LRP42105LRP42305LRP42306LRP43200LRP45050LRP45200LRP65800LRP65802LRP65803LRP65804LRP81801

111111111111111

Quadra Pro 2 ChargerPulsar Touch Competition ChargerLiPo Balance Board XHLiPo Balance Board FP/TP LiPo Balance Board PQPulsar Touch Temperature SensorPulsar Touch Sensor Wire SplitterLRP Competition 20A Power SupplyLRP 2in1 LiPo Guard + BECLiPo Parallel BalancerHigh Power Solder StationSoldering Tip 5mmSoldering Tip 1.2mmSoldering HandleLRP Speedo Updater Spec 2

:: LRP Brushless Motors / CombosLRP50430LRP50440LRP50450LRP50460LRP50480LRP50643LRP50644LRP50654LRP50664LRP50674LRP50684LRP50689LRP50694LRP50704LRP80741LRP80742LRP80743

11111111111111111

Vector K4 6.5 TurnVector K4 8.5 TurnVector K4 10.5 TurnVector K4 13.5 TurnVector K4 17.5 TurnVector X-20 10.5 TurnVector X-20 9.5 TurnVector X-20 8.5 TurnVector X-20 7.5 TurnVector X-20 6.5 TurnVector X-20 5.5 TurnVector X-20 5.0 TurnVector X-20 4.5 TurnVector X-20 4.0 TurnSpin Super / K4 17.5 Turn Spin Super / K4 13.5 TurnSpin Super / K4 10.5 Turn

:: LRP Misc.LRP62415LRP80135LRP82512LRP82515LRP82520LRP82530LRP82531LRP819307LRP819310LRP819315LRP819320

11111111111

LRP Logo Sticker SheetBEC Stabilizing Capacitor SXX Low Profile Fan 30mm Motor Fan/Clamp, GunmetalRadical Cooling Set, Blue SXX Power Cap 3.7-4.8V SXX Power Cap 6.0-7.4V70mm High Flex Sensor Wire100mm High Flex Sensor Wire150mm High Flex Sensor Wire200mm High Flex Sensor Wire

:: 1/18 Kits and RTR’s

:: 1/12, 1/10 Kits and RTR’s

2010320121

2042402070257029703070387039704670487049705070938020802290409041904290509062301013010890005900069000790010

11

1111111111111111111111111

RC18B2 - RC18T2 Team KitSC18 RTR Brushless (ready-to-run)

Nitro TC3 RTR Plus (ready-to-run)FT 12R5.2 KitRC10T4.2 FT KitSC10 Associated/RC10.com Truck RTR (ready-to-run)SC10 KMC Wheels Race Truck RTR (ready-to-run)SC10.2 FT KitRC10T4.2 RS RTR 2.4GHz Brushless (ready-to-run)SC10 RS RTR, Lucas Oil (ready-to-run)SC10 RS RTR, Pro Comp (ready-to-run)SC10 RS RTR, Rockstar/Makita (ready-to-run)SC10 RS RTR, Hart and Huntington (ready-to-run)SC10GT RTR (ready-to-run)FT RC10R5 KitFT RC10R5.1 KitFT RC10B4.1 Worlds KitFT RC10B4.2 KitRC10B4.2 RS RTR 2.4GHz Brushless (ready-to-run)SC10B RS RTR (ready-to-run)FT B44.2 4WD Buggy KitTC4 Club Racer 4WD Touring Car Race RollerFT TC6.1 WC 4WD Touring Car KitSC10 4x4 Lucas Oil RTR (ready-to-run)SC10 4x4 Pro Comp RTR (ready-to-run)SC10 4x4 Rockstar/Makita RTR (ready-to-run)SC10 4x4 FT Kit

:: Qualifier Series Vehicles705220510

30112

11

1

Pro Lite 4x4 RTR, 1/10 Scale (ready-to-run)RIVAL Electric Monster Truck RTR, 1/8 Scale (ready-to-run)APEX Touring V-Type, 1/10 Scale (ready-to-run)

30:: 1/8 Kits and RTR’s205012050220503

20504

809058090680907809088091280933

80934

111

1

111111

1

MGT 4.60 SE RTR (ready-to-run)MGT 8.0 Nitro RTR (ready-to-run)Limited Edition MGT 4.60 Nitro RTR, w/flag body (ready-to-run)Limited Edition MGT 8.0 Nitro RTR, w/flag body (ready-to-run)RC8RS “Race Spec” Nitro Buggy RTR (ready-to-run)RC8.2 Nitro Buggy FT KitRC8.2e Electric Buggy FT KitRC8.2e Electric Buggy RTR (ready-to-run)RC8T Championship EditionSC8.2e Short Course Race Truck, Rockstar/Makita Electric RTR (ready-to-run)SC8.2e Short Course Race Truck, Slick Mist ElectricRTR (ready-to-run)

:: RePlay CamerasRP001RP002RP021RP022RP023RP029RP030RP032RP033RP034RP036RP037RP038RP041RP042RP043RP044RP045RP046RP047RP048RP049RP054

11111111111111111111111

Replay XD1080 Complete Camera SystemReplay XD720 Complete Camera SystemReplay XD1080 Lens Bezel KitReplay XD1080 Clear Lens CoverReplay XD1080 Lens Bezel & Rear Cap O-RingReplay XD1080 HDMI to Mini-HDMIReplay XD1080 Mini 8-pin USB Charge Data CableUSB DC Car Charger 1A StubbyUSB DC Car Charger 500mAhMicro SDHC USB Reader3M VHB 4991 Mount Adhesive for SnapTray3M VHB 5962 Mount Adhesive for Pro Flat Mount3M VHB 5962 Mount Adhesive for SnapTrayReplay XD Suction Cup Arm Mini ClampReplay XD Suction Cup Short Arm BaseReplay XD Skateboard MountReplay XD VHB SnapTray, ConvexReplay XD VHB SnapTray, FlatAu Plug for Universal DC Wall ChargerEu Plug for Universal DC Wall Charger Uk Plug for Universal DC Wall ChargerUniversal USB DC Wall Charger 1AReplay ReView Field Monitor

:: Tools1111111314491541154215431544154515461547154815511553155415611562156315641565156715891590159216551656165716581659166016611662166316641665166616671668166916701671167216731674

1719173737183719372039876429695674947709

1111111111111111111111111111111111111111111

11121212111112

FT Turnbuckle Wrench12mm Big Bore Shock ToolFT Off Road Ride Height GaugeFT Hex Driver Set, (7 pcs)FT .050” Silver Hex DriverFT 1/16” Black Hex DriverFT 1.5mm Purple Hex DriverFT 5/64” Blue Hex DriverFT 3/32” Gold Hex DriverFT 2.5mm Green Hex DriverFT 3mm Red Hex DriverFT Screwdriver SetFT Phillips Silver ScrewdriverFT Silver Spring Hook Tool FT Nut Driver Set, (6 pcs)FT 3/16” Black Nut DriverFT 1/4” Red Nut DriverFT 5.5mm Red Nut DriverFT 11/32” Green Nut DriverFT 8mm Gold Nut DriverFT 5/64” Blue Ball Hex DriverFT 3/32” Gold Ball Hex DriverFT Ball Hex Driver Set, (3 pcs)FT 8-Piece 1/4” Hex Drive SetFT 1/4” Hex Drive Handle, without tipsFT 1/4” Hex Drive .050” TipFT 1/4” Hex Drive 1/16” TipFT 1/4” Hex Drive 5/64” - 2.0mm TipFT 1/4” Hex Drive 3/32” TipFT 1/4” Hex Drive 1.5mm TipFT 1/4” Hex Drive 2.5mm TipFT 1/4” Hex Drive 3/16” Nut Driver TipFT 1/4” Hex Drive 1/4” Nut Driver TipFT 1/4” Hex Drive 11/32” Nut Driver TipFT 1/4” Hex Drive 5.5mm Nut Driver TipFT 1/4” Hex Drive 7.0mm Nut Driver TipFT 1/4” Hex Drive 8.0mm Nut Driver TipFT 1/4” Hex Drive 5/64” - 2.0mm Ball End TipFT 1/4” Hex Drive 3/32” Ball End TipFT 1/4” Hex Drive Standard Screwdriver TipFT 1/4” Hex Drive Phillips Screwdriver TipFT 1/4” Hex Drive 2.5mm Ball End TipFT 1/4” 5 Piece Power Tool Tips Set (5/64-2.0mm, 1.5mm, 2.5mm, 5/64”- 2.0mm ball, 2.5mm ball)FT Camber + Track Width ToolFT Body Scissors12 Inch Nylon Wire Ties6 Inch Nylon Wire Ties8 Inch Nylon Wire TiesFT Droop GaugeShock Building ToolMolded Tools, SetV2 Stamped Multi-tool4 Inch Nylon Wire Ties

:: Notes

:: ApparelSP35**SP36**SP37**SP38SP39

SP66**SP67**SP68**SP69**

SP70**SP71**SP73**SP74**SP75**SP76**SP77**SP78**SP79**SP84**SP85**SP86**SP87**SP102SP103SP411SSP411LSP413SSP413LSP416SP417SP418

SP420**SP421SSP421LSP422SSP422LSP423SSP423LSP424SSP424L

715110684

111111111

1111111111111111111111

Pr.1111111111

Reedy 09’ White T-Shirt (L, XL, 2XL)Reedy 09’ Black T-Shirt (M, L, XL, 2XL, 3XL)Reedy 2012 T-shirt - Black (S, M, L, XL, 2XL, 3XL)Reedy Trucker HatReedy PatchStencil Blue T-Shirt (S, M, L, XL, 2-6XL)AE Stencil Gray Sweatshirt (S, M, L, XL, 2XL, 3XL)AE Stencil Blue T-Shirt (M, L, XL)AE 26 Time World Championship T-Shirt, Black (S, M, L, XL, 2XL, 3XL)Associated Windbreaker (S, M, L, XL, 3XL)Associated Winter Jacket (S, M, L, XL, 2XL)AE Long Sleeve T-Shirt (S, M, L, XL, 2XL)AE White T-Shirt (S, M, L, XL, 2XL, 3XL, 4XL)AE Blue T-Shirt (S, M, L, XL, 2-6XL)AE Black T-Shirt (S, M, L, XL, 2XL, 3XL, 4XL) AE 2012 T-Shirt, Blue (S, M, L, XL, 2XL, 3XL)AE 2012 T-Shirt, White (S, M, L, XL, 2XL, 3XL)AE 2012 T-Shirt, Black (S, M, L, XL, 2XL, 3XL)Reedy 3D T-Shirt, Black (S, M, L, XL, 2XL, 3XL)Reedy Zip Hoodie, Black (S, M, L, XL, 2XL, 3XL)Reedy Girl’s 3D T-Shirt, Black (S, M, L, XL)AE 2013 Zip Hoodie (S, M, L, XL, 2XL, 3XL)Outer & Inner Boxes, for #SP-416Inner Boxes only, for #SP416AE Hat 11’ Flat Bill Black S/MAE Hat 11’ Flat Bill Black L/XL26 Time World Championship Hat S/M26 Time World Championship Hat L/XLAssociated Car Carrier Bag, Medium1/10 FT Motor BagFactory Team 1/10 Car Carrier BagAE Pit Gloves (M, L, XL)AE 2012 Hat, Black, Flat Bill, S/MAE 2012 Hat, Black, Flat Bill, L/XLAE 2012 Hat, Black, Curved Bill, S/MAE 2012 Hat, Black, Curved Bill, L/XLAE 2012 Hat, White, Flat Bill, S/MAE 2012 Hat, White, Flat Bill, L/XLAE 2012 Hat, White, Curved Bill, S/MAE 2012 Hat, White, Curved Bill, L/XLReedy 2009 Track BannerTeam Associated Track Banner

I O

A CB

Ride Height:

I O

A CB

Driver: Date: Track: Event:Conditions: Indoor Outdoor Temp. Rev.1Setup Sheet

:: For more setups, visit RC10.com and click on “Setup Sheets”

Front Suspension

Front Shocks

Electronics / Weight

DifferentialsDrivetrain

Front Tires

Race and Vehicle Comments

Other

Rear Tires

Track Info

Rear Suspension

Rear Shocks

Anti Roll Bar:

NoneBlack (soft)Silver (med)Gold (hard)

Rear Hub Carriers:0°0.5°1°1.5°

Spring: Piston:Shock Oil: Limiter:

Motor & Wind:Pinion: Spur Gear:Batteries:Battery Placement:Ballast Weight: Chassis Weight:

Slipper:2 Pads 3 Pads 4 PadsNotes:

Ball:Gear:Notes:

Tire:Compound:Insert: Wheel:

Qualify: Main: Finish: TQ:Comments:


Surface:DirtCarpetAstroMulti

Traction:LowMedHigh

Moisture:WetDampDry

Conditions:GroovedDustySmoothBumpyHard PackLoamy

Radio:Throttle / Brake e.p.a:Throttle / Brake expo:Servo: Steering Expo:ESC: ESC Settings:

Body Type:Wing Type: Wing Angle:


Washers:

Washers:

Washers:

Ride Height:

Aluminum Hub Tower:ABC

Caster Block Spacing:ForwardBack

Caster:

20°25°30°

1 2 3

1

1

2

2

Camber:

Inner Toe:

Anti-Squat:

Camber:

Toe:12 3 -1 -1

0 3°

2°

2mm1mm

2mm

Brown

30wt

StockStock

30wt0

Stock

StockStockStock

Stock

21T 81T

Stock

2

Black#1 #1

24mm

24mm

Wheelbase:LongMediumShort

Chassis BraceGround Flat:

Steering Rack:

FrontBack


I O

A CB

32:: Hardware - 1:1 Scale View

Notes:

E-clip 1/8 (6299)

Clips

2-56x1/8 (9645)

2-56x5/16 (4334)

4-40x5/16 (6919)

4-40x3/8 (6917)

4-40x7/16 (2221)

4-40x3/4 (7413)

4-40x7/8 (91311)

3x8mm (31532)

Button Head (bhcs)

4-40 Aluminum Locknut (4449)

4-40 Plastic Nut (6472)

5-40 Diff Locknut (6629)

8-32 LP Steel Locknut (6953)

8-32 Steel Locknut (6952)

Nuts (lock/plain)

5/64 Diff Thrust Balls (6574)

3/32 Carbide Diff Balls (6581)

Diff Balls

Ballstuds

Black .20 Short (3981)

Black .30 Short (3983)

Silver .20 Short (6276)

Silver .30 Long (6277)

Silver .40 (6278)

.030 Ballstud Washer (9630)

.030 Nylon Spacer (4187)

Servo Mount Washer (7337)

#4 Washer (6936)

3/16 Axle Shim - Silver (7368)

FT Ballstud Washer, Aluminum(1mm and 2mm, 4 each) (31286)

Shims and Washers

4-40x3/8 (6292)

4-40x1/2 (6922)

4-40x5/8 (6915)

5-40x1/2 (9269)

Flat Head (fhcs)

Ball Bearings

Steering Rack Bearing (3971)

3/16x3/8 (3977)

3/16x1/2 RS (7935)

10 x 16mm (9832)

Cap Head (shcs)

2-56x 3/16 (9898)

4-40x1/4 (6285)

4-40x5/16” (6932)(4145, aluminum)

4-40x3/8 (6924)w/hole (6929)

4-40x1/2 (6925)

4-40x5/8 (6926)

4-40x3/4 (6927)

4-40x7/8 (7738)

4-40x1 (6928)

4-40x1 1/4 (6913)

4-40x1 3/4 (9833)

5-40x7/16 (9643)

5-40x9/16 (9644)

5-40x7/3/4 (9835)

Ride Height:

I O

A CB

Driver: Date: Track: Event:Conditions: Indoor Outdoor Temp. Rev.1Setup Sheet

:: For more setups, visit RC10.com and click on “Setup Sheets”

Front Suspension

Front Shocks

Electronics / Weight

DifferentialsDrivetrain

Front Tires

Race and Vehicle Comments

Other

Rear Tires

Track Info

Rear Suspension

Rear Shocks

Anti Roll Bar:

NoneBlack (soft)Silver (med)Gold (hard)

Rear Hub Carriers:0°0.5°1°1.5°


Motor & Wind:Pinion: Spur Gear:Batteries:Battery Placement:Ballast Weight: Chassis Weight:

Slipper:2 Pads 3 Pads 4 PadsNotes:

Ball:Gear:Notes:


Qualify: Main: Finish: TQ:Comments:


Surface:DirtCarpetAstroMulti

Traction:LowMedHigh

Moisture:WetDampDry

Conditions:GroovedDustySmoothBumpyHard PackLoamy

Radio:Throttle / Brake e.p.a:Throttle / Brake expo:Servo: Steering Expo:ESC: ESC Settings:

Body Type:Wing Type: Wing Angle:


Washers:

Washers:

Washers:

Ride Height:

Aluminum Hub Tower:ABC

Caster Block Spacing:ForwardBack

Caster:

20°25°30°

1 2 3

1

1

2

2

Camber:

Inner Toe:

Anti-Squat:

Camber:

Toe:12 3

Wheelbase:LongMediumShort


Steering Rack:

FrontBack

11 22Chassis BraceGround Flat:

I O

A CB

Associated Electrics, Inc.26021 Com

mercentre Dr.

Lake Forest, CA 92630 USAhttp://w

ww

.TeamAssociated.com

http://ww

w.RC10.com

http://twitter/Team

_Associatedhttp://bit.ly/AEonFacebook

call: (949) 544-7500 - fax: (949) 544-7501Check out the follow

ing web sites for all of our kits,

current products, new releases, setup help, tips, and racing info!

ww

w.Team

Associated.com. - w

ww

.RC10.com

Date post:	19-Mar-2016
Category:	Documents
Upload:	david-salazar
View:	214 times
Download:	1 times

Catalogo team associated b4.2RS

Documents