Product catalogue
2007/08
www.migomag.com.au
2
Contents
Section Products Pages Section 1 MIG Machines 3 to 11
Product Guide 3
Single Phase 4 to 6
Three Phase 7 to 8
Migomag Drive Rollers 8
Multi Function Welders 9
OTC Machines 10 to 11
Section 2 Tig & Arc Machines 12 to 17
Product Guide 12
Tig & Arc Machines 13 to 14
AC/DC Inverter 15
OTC Machines 16 to 17
Section 3 Plasma Machine 18 to 19
Product Guide 18
Plama Machines 19
Section 4 Cutting Machines 20 to 25
Section 5 Spot Welders 26
Section 6 Arc Welding Electrodes 27 to 31
Product Guide 27
Kobe Welding Electrodes 28
Kiswel Welding Electrodes 29
Stainless Steel Electrodes 30
Hard Facing Electrodes 31
Section 7 Semi-Automatic Mig Wires 32 to 37
Section 8 Tig & Gas Filler Wires 38 to 39
Section 9 Mig Torches 40 to 44
Section 10 Tig, Tungstens & Spare parts 45 to47
Section 11 Gas cutting equipment 48 to 49
Section 12 Safety & Accessories 50 to 51
Legal disclaimerLawvale Pty Ltd (trading as "Migomag") has taken all reasonable care to ensure that the information in this catalogue is true and correct at the date of publication. Nothing in this catalogue is intended to constitute a warranty, guarantee, representation or assurance as to the accuracy of the information or content in this catalogue and errors and omissions may occur. To the extent permitted by law, Migomag shall not be liable for any loss or damage which may directly or indirectly result from any advice, opinion, information, representa-tion or omission, whether negligent or otherwise contained in this catalogue. All information in this catalogue is supplied upon the condition that the person receiving it will make their own independent determination as to the accuracy and suitability for a purpose prior to purchase or any other act of reliance. Migomag reserves the right to change design and/or specifications of products without notice.
www.migomag.com.au
The OTC Daihen Corporation is Japan’s leading welding equipment manufacturer. OTC are at the forefront of Technology through rapid introduction of State of the Art technologies, fuzzy logic control technologies, and applied optic technologies to develop complete lines of compact, easy to use welding machines, and laser processing machines enabling ultra-high precision processing.
3
MIg MachInes Over the past 30 years the Migomag has built a reputation for suppling, reliable high quality products. The Migomag brand is synonymous with durable, hassle free machines and the highest regard for quality services and support. The Migomag MIG range now includes a 230 Amp with a separate wire feeder to ensure all your welding needs are catered for. Every Migomag is tested in the factory and approved by a quality control expert. Thus ensuring that Migomag machines work flawlessly out of the box every time. All Migomag Mig machines come with a 5/3 year warranty.
www.migomag.com.au
MIg Machines Product guIdeProduct Page Part# Class WireSpool WeldingCurrent MainVoltage PreciseVoltage Capableof Range Control weldingplate Switch upto...
Monomig190 4 AAM190 • 15kg 35-190Amps 240V50HZ15Amps 6position 6mm
Supamig200C 4 AASM200C • 5kg 30-180Amps 240V50HZ15Amps 6position 5mm
Monomig205 4 AAM205 • 5-15kg 30-180Amps 240V50HZ15Amps 6position 5mm
Monomig215/215PF 5 AAM215/PF3 • 5-15kg 40-215Amps 240V50HZ15Amps 6position 7mm
Migomag230/230PF3 5 AAM230/PF3 • 5-15kg 30-230Amps 240V50HZ15Amps 16position 8mm
Migomag260/260PF3 6 AAM260/PF3 • 5-15kg 30-260Amps 240V50HZ15Amps 16position 12mm
MigomagSP355 6 AASP355PF3 • 5-15kg 70-400Amps 240/415/480V 16position 12mm
MigomagClassic315/315PF3 7 AAM315/PF3 • 5-15kg 30-320Amps 240V50HZ15Amps 24position 16mm
Migomag350/350PF3 7 AAM350/PF3 • 5-15kg 30-350Amps 240V50HZ15Amps 24position 16mm
Migomag400/400PF3 8 AAM400/PF3 • 5-15kg 35-395Amps 240V50HZ20Amps 36position 20mm
OTCXD400/500 10 AAXD400/500 • 5-15kg 35-190Amps 240V50HZ15Amps 6position 20mm
OTCDigitalPulseInverter 11 AADP400A • 5-15kg 35-190Amps 240V50HZ15Amps 20mm+400MIGALUMINIUM
SINGLE
PHASE
THREE
PHASE
ClassKEY:•=LightIndustrial•=Industrial•=HeavyIndustrialAllMIGMachinescomewith3meterMigtorch,flowregulator,gashoseandfittings,3meterearthleadsandclamps,plug,sparerollersandoperationalinstructions.
SECTION 1
5
SECT
ION
1
www.migomag.com.au4
MonoMIg 190The Migomag 190 is a powerful single phase mig. It accommodates a 15kg spool of wire and is very versatile with excellent welding characteristics on thin gauge materials but also has the capacity to weld up to 6mm. It also has excellent welding characteristics for welding aluminum.
Comes with:• 3 meter Mig torch• flow regulator• gas hose and fittings• 3 meter earth leads and clamps• plug• spare rollers• operational instructions
Features:• 5/3 year warranty on major parts • Single Phase • Manufacutured in Hungary • Automatic thermal overload protection • 6 position switches for precise voltage control • Reversible polarity for gasless wire welding • Straightforward control panel • Forced air cooling
suPaMIg 200cPortable compact unit weighing only 48kgs, it holds a 5 kg spool of wire. The Supamig 200C comes with an extendable handle, making it easier to maneuver. It has a fan cooled unit and is capable of producing the smooth arc required to weld thin gauge metal, the power to weld heavier sheet up to 5mm and is excellent for welding Aluminum using 1.0mm wire.
Comes with:• 3 meter Mig torch• flow regulator• gas hose and fittings• 3 meter earth leads and clamps• plug• spare rollers• operational instructions
Features:• 5/3 year warranty on major parts • Single Phase • Manufacutured in Hungary • Automatic thermal overload protection • 6 position switches for precise voltage control • Reversible polarity for gasless wire welding • Straightforward control panel • Forced air cooling
MonoMIg 205The Monomig 205 is fitted with wheels & gas bottle holder, this fan cooled unit accommodates a 15kg spool of wire. This compact machine produces the smooth arc required to weld thin gauge metal, the power to weld heavier sheet up to 5mm and excellent for Aluminum welding using 1.0mm wire.
Comes with:• 3 meter Mig torch• flow regulator• gas hose and fittings• 3 meter earth leads and clamps• plug• spare rollers• operational instructions
Features:• 5/3 year warranty on major parts • Single Phase • Manufacutured in Hungary • Automatic thermal overload protection • 6 position switches for precise voltage control • Reversible polarity for gasless wire welding • Adjustable Burnback control • Forced air cooling
AAM190
AASM200C
AAM205
Single Phase
Specifications:Mains Voltage: 240V 50HZ Amps Aluminium Wire Size: 0.8 – 1.0mmWelding Current Range: 35 – 190 Amps OCV: 17 – 32VWelding Current Cycle: 30% at 145 Amps Dimensions: 480x260x390mmVolt Steps: 6 Weight: 49kgSteel & Stainless wire size: 0.6 – 0.8mm
Specifications:Mains Voltage: 240V 50HZ 15Amps Aluminium Wire Size: 0.8 – 1.0mmWelding Current Range: 30 – 180 Amps OCV: 17 – 31VWelding Current Cycle: 30% at 150 Amps Dimensions: 480x260x390mmVolt Steps: 6 Weight: 48kgSteel & Stainless wire size: 0.6 – 0.8mm
Specifications:Mains Voltage: 240V 50HZ 15Amps Aluminium Wire Size: 0.8 – 1.0mmWelding Current Range: 30 – 180 Amps OCV: 17 – 31VWelding Current Cycle: 30% at 155 Amps Dimensions: 820x330x500mmVolt Steps: 6 Weight: 56.5kgSteel & Stainless wire size: 0.6 – 0.8mm
www.migomag.com.au
SECTION 1
MIg MachInes
5
Comes with:• 3 meter Mig torch• flow regulator• gas hose and fittings• 3 meter earth leads and
clamps• plug• spare rollers• operational instructions
MonoMIg 215/215PFThe Monomig 215 is a portable mig welder fitted with wheels and gas bottle holder. This fan cooled unit accommodates a 15kg spool of wire, it has a easy to use front panel with a digital amp meter. This machine has the capability of producing a smooth arc to weld thin gauge metal, the power to weld heavier sheet up to 7mm and is excellent for welding Aluminum using 1.0mm and 1.2mm wire. The Monomig 215 has the option of a separate wire feed with a 10 meter interconnecting cable allowing the portability needed for difficult to access jobs.
Features:• 5/3 year warranty on major parts • Single Phase • Wire feed speed 18m/min • Automatic thermal overload protection • 6 position switches for precise voltage control • Enclosed integrated wire feed unit • Hinged compartment door to keep wire sterile • Adjustable burnback control • Straight forward control panel • Complete with gas bottle holder and security chain, rubber tyred wheels • Positive drive wire feed system including step less electronic speed control
MIgoMag 230/230PF3The Migomag 230 is a compact, robust mig machine capable of welding up to 8mm thick-ness. This unit has a positive start and excel-lent arc characteristics ideal for welding steel, stainless and aluminum. The 230PF3 separate wire feed option gives the portability required for difficult to access jobs without moving the power source.
AAM215
AAM215PF
Single Phase
Specifications:Mains Voltage: 240V 50HZ 15Amps Aluminium Wire Size: 1.0 – 1.2mm Dimensions: 215 Compact 820x450x720Welding Current Range: 40 – 215 Amps OCV: 18 – 37V Weight: 215 Compact 70kgWelding Current Cycle: 30% at 200 Amps Steel & Stainless wire size: 0.6 – 1.0mm Dimensions: Sep w/feed 615x245x425Volt Steps: 6 Weight: 215 PF 82kg
Specifications:Mains Voltage: 240V 50HZ Amps Aluminium Wire Size: 0.9 – 1.2mmWelding Current Range: 30 – 230 Amps OCV: 17.5 – 35VWelding Current Cycle: 60% at 190 Amps Dimensions: 800x325x690mmVolt Steps: 16 Weight: 83kgSteel & Stainless wire size: 0.6 – 0.9mm
AAM230PF
Features:• 5/3 year warranty on major parts • Single Phase • Wire feed spread 18m/min • Automatic thermal overload protection • Available withseparate wire feeder (10 metre traveller) a wire control & mode selection PF3.
• Optional 4 wheel PF4 seperate wire feed unit. • 16 position switches for precise voltage control • Enclosed integrated wire feed unit • Complete with gas bottle holder and security chain, rubber tyred wheels. • Hinged compartment door to keep wire sterile • Adjustable burnback control • Straight forward contol panel • Positive drive wire feed system including step less electronic speed control
Comes with:• 3 meter Mig torch• flow regulator• gas hose and fittings• 3 meter earth leads and clamps• plug• spare rollers• operational instructions
The Migomag SP355 operates on 480, 415 or 240 volt single phase input power and produces up to 400 amps of output power when used with 480V or 415V and 330 amps on 240 volts. Power source designed and manufactured in Australia, positive 40mm two wheel driven wire feed system with step less electronic speed control. The unit is capable of welding steel, stainless and aluminum and comes standard with Migomags PF3 wire feed unit with 10 meter interconnecting cables.
Comes with:• 3 meter Mig
torch• flow regulator• gas hose and
fittings• 3 meter earth
leads and clamps
• plug• spare rollers• operational
instructions
Features:• 5/3 year warranty on major parts • Single Phase • Manufactured in Australia • Available with separate wire feeder (10 meter traveler) / a wire feed control and mode selection PF3 • Optional 4 wheel PF4 separate wire feed unit • Wire feed speed 18m/min • Automatic thermal overload protection • 16 position switches for precise voltage control • Reversible polarity for gasless wire welding • Enclosed integrated wire feed unit • Complete with gas bottle holder and security chain, rubber tyred wheels. • Hinged compartment door to keep wire sterile • Adjustable burnback control
5
SECT
ION
1
www.migomag.com.au6
MIgoMag 260/260PF3
MIgoMag sP355
Welding up to 12mm plate the Migomag 260 is perfect for a large number of applications. The 260PF3 separate wire feed option gives the portability required for difficult to access jobs without moving the power source.
AAM260PF3
AAM355
Single Phase
Specifications:Mains Voltage: 240V 50HZ 15Amps Aluminium Wire Size: 0.9 – 1.2mm Dimensions: Power Source 800x325x690mmWelding Current Range: 30 – 260 Amps OCV: 17 – 37.5V Weight: Power Source 87kgWelding Current Cycle: 60% at 230 Amps Steel & Stainless wire size: 0.6 – 1.0mm Dimensions: PF3 w/feed 600x220x450Volt Steps: 16 Wire Feed Speed: 18m/min Weight: PF3 w/feed 18kg
Comes with:• 3 meter Mig
torch• flow regulator• gas hose and
fittings• 3 meter earth
leads and clamps
• plug• spare rollers• operational
instructions AAM260
Features:• 5/3 year warranty on major parts • Single Phase • Manufactured in Hungary • Available with separate wire feeder (10 meter traveler) / a wire feed control and mode selection PF3 • Optional 4 wheel PF4 separate wire feed unit • Wire feed speed 18m/min • Automatic thermal overload protection • 16 position switches for precise voltage control • Reversible polarity for gasless wire welding • Enclosed integrated wire feed unit • Complete with gas bottle holder and security chain, rubber tyred wheels. • Hinged compartment door to keep wire sterile • Adjustable burnback control
Specifications:Mains Input Voltage: 480V 50HZ 32 Amps Steel & Stainless wire size: 0.8 – 1.6mmMains Input Voltage: 415V 50HZ 37 Amps Aluminium Wire Size: 0.9 – 1.6mmMains Input Voltage: 240V 50HZ 50 Amps Wire Feed Speed: 18m/minWelding Current Range 480/415: 70 – 400 Amps Dimensions: Power Source 880x370x600mmWelding Current Range 240V: 70 – 330 Amps Weight: Power Source 104kgWelding Current Cycle: 60% at 355 Amps Dimensions: PF3 w/feed 600x220x450mmVolt Steps: 16 Weight: PF3 w/feed 18kgOCV: 16 – 43V
Comes with:• 3 meter Mig torch• flow regulator• gas hose and fittings• 3 meter earth leads and clamps• plug• spare rollers• operational instructions
www.migomag.com.au
SECTION 1
MIg MachInes
7
The high performing Migomag 350 provides excellent arc characteristics for welding steel, stainless and aluminum. Suitable for production welding from light gauge sheet metal up to 16mm. The Migomag 350 comes with a separate wire feeder with control & mode selector options, giving the portability required for difficult to access jobs without moving the power source.
MIgoMag 350/350PF3
Features:• 5/3 year warranty on major parts • Three Phase • Manufactured in Hungary • Available with separate wire feeder (10 meter traveler) / a wire feed control and mode selection PF3
The Migomag 315 Classic has been available on the Australian market for over 20 years. This upgraded model comes with a positive geared drive system and the latest PCB. The classic 315 provides excellent arc characteristics for welding steel, stainless & aluminum. Suitable for production welding ranging from light gauge sheet metal up to 16mm plate. The Classic 315 is available with a separate wire feed, the Portable unit has wire feed control and mode selector and allows for access to difficult to access jobs without moving the power source.
Features:• 5/3 year warranty on major parts • Three Phase • Manufactured in Hungary • Available with separate wire feeder (10 meter traveler) / a wire feed control and mode selection PF3
Comes with:• 3 meter Mig torch• flow regulator• gas hose and fittings• 3 meter earth leads and clamps• plug• spare rollers• operational instructions
AAC315
AAC315PF3
AAM350
AAM350PF3
Three Phase
MIgoMag classIc 315/315PF3
Specifications:Mains Voltage: 415V 50HZ 15 Amps Aluminium & F/cored Wire Size: 0.9 – 1.2mmWelding Current Range: 30 – 320 Amps Wire Feed Speed: 18m/minWelding Current Cycle: 60% at 280 Amps Dimensions: Power Source 780x330x680mmVolt Steps: 24 Weight: Power Source 115 / 122kgOCV: 17.5 – 35.5V Dimensions: PF3 w/feed 600x220x450mmSteel & Stainless wire size: 0.6 – 1.2mm Weight: PF3 w/feed 18kg
Specifications:Mains Voltage: 415V 50HZ 15Amps Aluminium Wire Size: 0.9 – 1.2mm Dimensions: Power Source 970x390x735mmWelding Current Range: 30 – 350 Amps OCV: 17.5 – 36V Weight: Power Source 122 / 135kgWelding Current Cycle: 60% at 315 Amps Steel & Stainless wire size: 0.6 – 1.2mm Dimensions: PF3 w/feed 600x220x450Volt Steps: 24 Wire Feed Speed: 18m/min Weight: PF3 w/feed 18kg
5
SECT
ION
1
www.migomag.com.au8
For MIgoMag MachInes Part BreaKdoWns Please VIsIt WWW.MIgoMag.coM.au MIGOMAG DRIVE ROLLERS
MIGOMAG MACHINE NUMBER
Migomag 190/ 200C 205
0.6-0.8mm Natta
30mm
0.8-1.0mm
Natta 30mm
1.0-1.2mm Natta
30mm
1.2-1.6mm
Natta 30mm
0.8-1.0mm Natta
30mm -
1.2-1.6mm
Natta 30mm - -
0.8-1.0mm
Natta 30mm
1.0-1.2mm
Natta 30mm -
Part Number 86003029 86003030 86003031 86003050 86003045 - 86003032 - - 86003046 86003033 -
Migomag 195/ 230
0.6-0.8mm Band
30mm
0.8-1.0mm
Band 30mm
1.0-1.2mm Band
30mm
1.2-1.6mm
Band 30mm
0.8-1.0mm Band
30mm
1.0-1.2mm
Band 30mm
1.2-1.6mm
Band 30mm - -
0.8-1.0mm
Band 30mm
1.0-1.2mm
Band 30mm
1.2-1.6mm
Band 30mm
Part Number 86003027 86003038 86003028 86003048 86003037 86003035 86003036 - - 86003047 86003034 86003068
Old Migomags
0.6-0.8mm Boss
30mm
0.8-1.0mm
Boss 30mm - - - -
1.2-1.6mm
Boss 30mm - - -
1.0-1.2mm
Boss 30mm
1.2-1.6mm
Boss 30mm
Part Number 86003023 86003024 - - - - 86003025 - - - 86003022 86003049
Migomag 260/ 260PF3/ 315/ 315PF3/ 350/
350PF3/ 355PF3/ 400/ 400PF3/ 400PF4
0.6-0.8mm Band
40mm
0.8-1.0mm
Band 40mm
1.0-1.2mm Band
40mm
1.2-1.6mm
Band 40mm
0.8-1.0mm Band
40mm
1.0-1.2mm
Band 40mm
1.2-1.6mm
Band 40mm
1.6-2.0mm
Band 40mm
2.0-2.4mm
Band 40mm
0.8-1.0mm
Band 40mm
1.0-1.2mm
Band 40mm
1.2-1.6mm
Band 40mm
Part Number 8600350A 86003051 86003052 86003053 86003057 86003058 86003059 86003060 86003061 86003065 86003066 86003067
Aluminium Wire U-GrovedSolid Wire V-Grooved Gasless Wire Flux Cored
30MM BOSS 30MM NATA 30MM BAND 40MM BAND
The Migomag 400 is designed to give optimum performance to the industrial fabricator. The large operational range and three inductance levels allows welding of thin material and sec-tions of 20mm thickness. Suitable for steel, stainless and aluminum. The Migomag 400 has an optional portable separate wire feed unit including wire feed control and mode selection options. The Migomag 400 comes with a positive 40mm two wheel driven wire feed system with step less electronic speed control. The Migomag 400 is also available with a optional digital volt and amp kit (Part #: AAM400VA)
MIgoMag 400/400PF3
Comes with:• 3 meter Mig torch• flow regulator• gas hose and fittings• 3 meter earth leads and clamps• plug• spare rollers• operational instructions
Features:• 5/3 year warranty on major parts • Three Phase • Manufactured in Hungary • Available with separate wire feeder (10 meter traveler)/a wire feed control and mode selection PF3
AAM400
AAM400PF3
Three Phase
Specifications:Mains Voltage: 415V 50HZ 20Amps Aluminium Wire Size: 0.9 – 1.6mm Dimensions: Power Source 970x390x735mmWelding Current Range: 35 – 395 Amps OCV: 18 – 44V Weight: Power Source 125 / 138kgWelding Current Cycle: 60% at 340 Amps Steel & Stainless wire size: 0.6 – 1.2mm Dimensions: PF3 w/feed 600x220x450Volt Steps: 36 Wire Feed Speed: 18m/min Weight: PF3 w/feed 18kg
www.migomag.com.au
SECTION 1
MIg MachInes
9
The Migomag 340 Elektropuls incorporates new twin puls technology, it memorizes welding parameters (automatically adjusted) and has trip tronic settings. The arc height and wire feed speed is easily adjusted, aluminium welding is easily achieved using the 340s minimum penetration for very thin welds without distortion.
MIgoMag 340 eleKtroPuls
Features:• Powertec torch, allowing arc height and
power to be adjusted directly from the torch, and the recall of memorized weld-ing programs
The new Migomag Cereberus single phase machine uses the latest in European technology. It is capable of multi processing processes Mig, Tig & DC Tig.Features:• Mig Welding Gas or Gasless • Mig Welding Stainless Steel, mild steel or Aluminium • Arc Welding • DC Tig Welding
Comes with:• 3 meter Mig torch• flow regulator• gas hose and fittings• 3 meter earth leads and clamps• plug• spare rollers• operational instructions
AAMT161
AAM340EP
Multi Function Welding Machines
MIgoMag cereBrus 180 InVerterMig / tig / stickaaMt161
Specifications: Electrode TIG MIGMains Voltage: 415V 50HZ 15 AmpsWelding Current 40%: 150 Amps 160 Amps 160 AmpsWelding Current 60%: 130 Amps 130 Amps 135 AmpsWelding Current 100%: 105 Amps 105 Amps 105 AmpsOCV: 21.0 - 26V 10.3 - 16.4V 15.7 - 22VDimensions: 470x205x355mmWeight: 19kg
Specifications:Mains Voltage: 400V 55HZWelding Current Range: 25 – 320 AmpsWelding Current Cycle: 60% at 270 AmpsOCV: 18 – 44VDimensions: Power Source 745x340x498mmWeight: Power Source 35kg
5
SECT
ION
1
www.migomag.com.au10
New Generation ONE TOUCH Thyristor controlled Migs with Micro Processor. Updated model from the XS and XC 350/500. Featuring Penetration control and duel parameter welding operation
otc Xd400 / otc Xd500
The OTC Daihen Corporation is Japan’s leading welding equipment manufacturer. OTC are at the fore-front of Technology through rapid introduction of State of the Art technologies, fuzzy logic control technologies, and applied optic energy technologies to develop complete lines of compact, easy to use welding machines, and laser processing machines enabling ultra-high precision processing.
Comes with:• OTC 3m Mig gun, • spare fuses, • spare drive rollers and earth leads. • 10m leads to PF unit
Remote ContRoL Box
ContRoL PaneL
Specifications: XD400Rated Input Voltage: 415V +10% -10% Output Voltage Range: 15 – 36VRated Input Power: 20kVA, 18.3kW Max. no-load Voltage: 58VRated Input Current: 28 Amps Rated Duty Cycle: 35%Rated Output Current: 400 Amps Temperature Rise: 160ºCRated Load Voltage: 26V Weight: 115kgOutput Current Range: 50 – 400 Amps Dimensions: 380x798x730
Features:• One knob synergic control. The machine delivers a built in preset voltage program to accommodate the amperage (wire speed feed) • Separate control mode with infinite control over amperage and voltage • Cutting edge 'penetration control' is one flip of a knob away. This keeps the depth of penetration at a constant level even when tip to work distance varies for assured quality of welding.
• Powerful wire feed with solid state 110W motor and wire straightening Crater fill/dual parameter welding function for tre-mendous operator flexibility
• Extra long 12m inter connecting cable group for maximum flex-ibility
• User friendly design with simple operating panel
• Self diagnostic system for ease of fault finding
• Terminals for robotic & auto-matic maching
• Power saving design, shielding gas saving function, on demand cooling fan, power saving sequence
• Safety design. Covers on input and output terminals, thermostat for preventing over heating and low voltage drive for feeder for 24VDC
Specifications: XD500Rated Input Voltage: 415V +10% -10% Rated Load Voltage: 45V Rated Duty Cycle: 60%Rated Input Power: 31.5kVA, 28kW Output Current Range: 50 – 500Amps Temperature Rise: 160ºCRated Input Current: 43.9 Amps Output Voltage Range: 15 – 45V Weight: 184kgRated Output Current: 500 Amps Max. no-load Voltage: 68V Dimensions: 460x660x859
XD400XD500
www.migomag.com.au
SECTION 1
MIg MachInes
11
Comes with:• OTC 3m Mig gun, • spare fuses, • spare drive rollers and
earth leads.
UseR FRiendLy toUCh PaneL
ContRoL LayoUt
Remote ContRoL Box
wave PULsed weLding PRodUCes the Bead-Like aPPeaRanCe oF
tig weLding
AAPD400A
Specifications: Rated Welding Current: 400 Amps Wire Feed Speed: 22m/minRated Input: 22kVA Power Source Dimensions: 250x640x544Output Voltage Range: 12 – 38V Wire Feeder Dimensions: 215x543x350Fuse/Braker Capacity: 50 Amps Total Weight: 61kgOutput Current Range: 30 – 400 Amps Std Interconnecting Lead Kit: 7m
otc dIgItal Pulse InVerter 400 MIg aluMInIuM The OTC DP400 digital inverter has all the function-ality of pulse welding, plus the ability to perform digital short arc welding. It comes with full robot compatibility and is extremely useful for semi auto-matic welding. Take complete control of welding with the most accurate features made possible only through advances available with digital technology, all controlled by a simple to use front panel.
Features:• Incredible arc stability & welding speeds from
very low to high amperage when welding Aluminium, stainless, steel, galvnised steel & alloys
• Smaller & lighter 80kHz IGBT Digital Inverter
• Four-Roll Encoder Wire Feeder as standard equipment
• 100 job memory for semi-automatic use
• Factory optimised pulse waveforms
• Pulse welding programs for titanium & inconel
• Adjustable pulse waveform via function key
For the latest from Migomag or OTC Please Visit
www.migomag.com.au
5www.migomag.com.au12
SECT
ION
2Tig & Arc Machines
In 2007 Migomag introduces a new list of products to its ARC MMA range. The Migomag Tig & Arc range now includes the Migomag Flashgun, the Migomag 100DCI & a Migomag 185 High Frequency Tig Machine.
ClassKEY:•=LightIndustrial•=Industrial•=HeavyIndustrial
tIg & arc Machines Product guIdeProduct Page Part# Class VRD WeldingCurrent Generator
Range Safe
MigomagFlashgun25 13 AAFLASHGUN25 • - 60%at50Amps YES
Migomag100 13 AAT100DCI • - 30%at150Amps YES
Migomag155DCI 13 AAT155DCI • - 35%at150Amps YES
Migomag155TIGHF 13 AAT155TIGHF • - 35%at150Amps YES
Migomag161VRD 14 AAT161VRD • YES 35%at160Amps YES
Migomag185TIGHF 14 AAT185TIGHF • - 35%at180Amps YES
Migomag180ACDC 14 AAT180AC/DC • - 35%at180Amps YES
Migomag220ACDC 15 AAT220AC/DC • - 30%at220Amps YES
Migomag260ACDC 15 AAT260AC/DC • - 30%at250Amps YES
13
tIg & arc MachInes
www.migomag.com.au
SECTION 2
MIgoMag Flash-gun 25Inverter stick WelderAs easy to use as a drill, the Migomag flashgun 25 allows you to run 2.5mm Electrodes in the palm of your hand. At only 2 kgs the flashgun has synergic-regulation, a quick electrode coupler, it has Arc-Force, Anti-Stick and Anti-Shock. It comes with an ways to store case and is ready to go.
Features:• 12 months warranty • Single Phase • Generator safe • Lightweight • Hot start Arc function
MIgoMag 155dcI InverterThe 155DCI 150 Amp inverter is ideal for MMA (stick) welding & scratch start TIG welding. It is a light, robust, heavy duty unit and is the third generation of the Migomag 155DCI. It features a INPUT POWER SAFE MODE. The machine will switch itself off if the input voltage is out of balance or reaches a dangerous level and will restart as soon as the power is correct.
Optional Accessories:• 3m Arc and earth lead set (WLS2003M)• 4m 17V TIG torch (7051453)• Argon regulator (CZ101-327)
Features:• 18 months warranty • Single Phase • Input power safe mode • Generator safe • Thermal overload protection • Fan cooled • Lightweight • Hot start Arc function
AAT155DCI
Specifications:Mains Voltage: 240V 50HZ 16 Amps -15% +10%Welding Current Range: 15 – 155 AmpsWelding Current Cycle: 35% at 150 AmpsOCV: 55VDimensions: 152x225x290mmWeight: 6kg
AAFLASHGUN25
MIgoMag 100dcI Kit Inverter
The new Migomag 100 DCI comes complete in a compact carry case. Included in the case are Earth leads, welding shield, sample electrodes and wire brush.
Specifications:Mains Voltage: 240V 50HZ 16 AmpsWelding Current Range: 3 – 105 AmpsWelding Current Cycle: 30% at 105 AmpsOCV: 60VDimensions: 217x107x210mmWeight: 3.2kg
Specifications:Mains Voltage: 230V 10 AmpsWelding Current Range: 30 – 90 AmpsWelding Current Cycle: 60% at 50 AmpsOCV: 54VWeight: 2kg
AAT100DCI
5www.migomag.com.au14
SECT
ION
2Industrial Inverters
Optional Accessories:• 3m Arc and earth lead set (WLS2003M)• 4m 17V TIG torch (7051453)• Argon regulator (CZ101-327)
MonoMIg 161 Vrd InverterThe Migomag 161VRD has optimum dynamic characteristics for electrode and Tig welding. The Single phase machine is lightweight and compact, build into a aluminum casing. The unit is fitted with V.R.D. matching Australian standards, to reduce open circuit voltage and maintain users safe-ty. The 161VRD is capable of Tig DC Welding, Lift Arc Strike, and Variable slope (0-10 seconds). It can be used with long extension cables, and is IP23 weather protected.
Features:• 18 month warranty • Single Phase • Input power safe mode • Generator safe • Thermal overload protection • Fan cooled • Lightweight • Hot start Arc function • VRD Security system • HF or Lift Arc • 2 & 4 torch function • Optional amp control Tig torch • Optional PCB chip to remove VRD AAT161VRD
Specifications:Mains Voltage: 240V 50HZ Welding Current Range/TIG: 5 – 160 AmpsWelding Current Range/MMA: 5 – 150 AmpsWelding Current Cycle: 35% at 160 AmpsOCV: 60VDimensions: 350x130x280mmWeight: 6kg
Features:• 18 month warranty • Single Phase • Input power safe mode • Thermal overload protection • Fan cooled • Lightweight • Hot start Arc function • HF or Lift Arc • 2 & 4 torch function • Optional amp control Tig torch • Optional PCB chip to remove VRD
MIgoMag 185tIghF
Specifications:Mains Voltage: 240V 50HZ Welding Current Range: 3 – 180 AmpsWelding Current Cycle: 35% at 180 AmpsOCV: 85VDimensions: 410x152x243mmWeight: 8kg
AAT185TIGHF
Optional Accessories:• 3m Arc and earth lead set (GD5M-2535)• 4m 17V TIG torch (7051453)• Adjustable TIG torch (7051470)• Argon regulator (CZ101-327)
MIgoMag 155tIghFThe 155TIGHF is a 150Amp inverter specifically designed for professional TIG welding. The machine allows for exceptional control over the arc and comes standard with INPUT POWER SAFE MODE to protect the machine.
Optional Accessories:• 3m Arc and earth lead set (WLS2003M)• 4m 17V TIG torch (7051453)• Adjustable TIG torch (7051466)• Argon regulator (CZ101-327)
Features:• 18 month warranty • Single Phase • Input power safe mode • Generator safe • Thermal overload protection • Fan cooled • Lightweight • Hot start Arc function • HF or Lift Arc • 2 & 4 torch function • Optional amp control Tig torch • Optional PCB chip to remove VRD
Specifications:Mains Voltage: 240V 50HZ 16 Amps -15% +10% Welding Current Range: 3 – 155 AmpsWelding Current Cycle: 35% at 150 AmpsOCV: 84VDimensions: 152x243x327mmWeight: 6.8kg
15
tIg & arc MachInes
www.migomag.com.au
SECTION 2Industrial Inverters
MIgoMag 220 ac/dc heavy Industrial InverterThe Migomag 220 AC/DC is designed for professional Tig welding using all types of materials including Aluminum. Using 240 volt single phase power, this machine is user friendly and comes with INPUT POWER SAFE MODE.
Optional Accessories:• 3m Arc and earth lead set (GD5M-2535)• 4m 17 Tig Torch (7051461)• 4m 26 Tig Torch (7051468)• 4m 26 Tig Torch- Amp Controlled(7051470)• 4m 17 Tig Torch- Amp Controlled(7051460)• Argon regulator (CZ101-327)
MIgoMag 260 ac/dc heavy Industrial InverterThe Migomag 260 AC/DC is a portable light weight unit that uses three phase power. The machine is available with an optional trolley (020213/MT) and Migoamg water cooler (020258/MI) as shown in picture. The 260 AC/DC comes standard with INPUT POWER SAFE MODE.
Optional Accessories:• 3m Arc and earth lead set (GD5M-2535)• 4m 26 Tig Torch (7051468)• 4m 26 Tig Torch- Amp Controlled(7051470)• Argon regulator (CZ101-327)
AAT220AC/DC
AAT260AC/DC
Specifications:Mains Voltage: 240V 50HZ -15% +10%Welding Current Range/TIG: 3 – 220 AmpsWelding Current Range/MMA: 30 – 200 AmpsWelding Current Cycle: 30% at 220 AmpsOCV: 60VDimensions: 407X209X372mmWeight: 19kg
Specifications:Mains Voltage: 415V 3PHWelding Current Range/TIG: 5 – 250 AmpsWelding Current Range/MMA: 30 – 230 AmpsWelding Current Cycle: 30% at 250 AmpsOCV: 60VDimensions: 450X209X372mmWeight: 22kg
Optional Accessories:• 3m Arc and earth lead set (GD5M-2535)• 4m 17 Tig Torch (7051461)• 4m 26 Tig Torch (7051468)• 4m 26 Tig Torch- Amp Controlled(7051470)• 4m 17 Tig Torch- Amp Controlled(7051460)• Argon regulator (CZ101-327)
MIgoMag 180 ac/dc heavy Industrial
Specifications:Mains Voltage: 240V 50HZ -15% +10%Welding Current Range/TIG: 3 – 180 AmpsWelding Current Range/MMA: 30 – 180 AmpsWelding Current Cycle: 35% at 180 AmpsOCV: 60VDimensions: 407x209x372mmWeight: 19kg
Features:• 18 month warranty• Three Phase• Input power safe mode• Generator safe• Thermal overload protection• Fan cooled• Digital Amp meter• Up and down slope adjustment• Full pulse adjustment• Hot start Arc function• HF or Lift Arc• 2 & 4 torch function• Optional amp control Tig torch• Optional PCB chip to remove VRD• AC wave shape adjustment
Features:• 18 month warranty • Single Phase • Input power safe mode • Generator safe • Thermal overload protection • Fan cooled • Digital Amp meter • Up and down slope adjustment • Full pulse adjustment • Hot start Arc function • HF or Lift Arc • 2 & 4 torch function • Optional amp control Tig torch • Optional PCB chip to remove VRD • AC wave shape adjustment
AAT180AC/DC
Features:• 18 month warranty • Single Phase • Input power safe mode • Generator safe • Thermal overload protection • Fan cooled • Digital Amp meter • Up and down slope adjustment
• Full pulse adjustment • Hot start Arc function • HF or Lift Arc • 2 & 4 torch function • Optional amp control Tig torch • Optional PCB chip to remove VRD • AC wave shape adjustment
The Migomag 180 AC/DC inverter is a professional Tig machine suitable for Aluminum welding using single phase power. The machine is user friendly and easy to use. The 180AC/DC comes standard with INPUT POWER SAFE MODE.
accutIg 300PIC. Thyristor controlled high performance pulse tig welding machine. Using pulsed Tig technol-ogy, high quality and difficult welding is done easily. The dynamic reactor control produces a rectangular AC wave giving excellent arc stability and control. Adjustable cleaning width func-tion gives one knob control over cleaning width, bead appearance and penetration.
Comes with:• 4m water cooled Tig Torch• 4m remote control• earth lead and spare fuse
AAEP300
AAMR315
Features:• Adjustable cleaning function • Full adjustment over pulse • Pre and post gas flow • Up and down crater fill
• Arc spot timer • Hand remote control • Pressure detection function • Water cooling torch
Specifications:Main Voltage: 415V 29kV DC Output Current Range/TIG: 5 – 300 Amps Change-over SystemPhase: 3PH DC Output Current Range/STICK: 20 – 300 Amps Up slope: 0.1 – 5 secFuse/Braker: 60 Amps slow blow (D curve) AC Output Current Range/TIG: 20 – 300 Amps Down slope: 0.1 – 5 secRated Input/TIG: 28.8 (12.9kW) AC Output Current Range/STICK: 20 – 300 Amps Gas pre-flow: 0.3 secRated Input/STICK: 23.8 (15.1kW) Initial Crater-Filler Current DC/TIG: 5 – 300 Amps Gas post-flow: 3 – 20 secRated Duty Cycle: 40% Initial Crater-Filler Current DC/TIG: 20 – 300 Amps Crater Filler Control: ON, OFF, RepeatMax. no-load voltage: 78V Pulse TIG function/Pulse: 0.03 – 1.2 sec Weight: 176kgInitial Voltage (DC TIG): 100V Pulse TIG function/Bare: 0.05 – 2.5 sec Dimensions: 859x460x663mm
Mr315tIC. Thyristor controlled high performance pulse tig welding machine. Multi mode for high performance. High welding quality and high efficiency with DC TIG, Pulsed DC TIG and DC Stick. High efficiency with low spatter is achieved from 2.6 to 5mm thick electrode. Wide Application. Powerful performance for pressure vessel, pipes, plant maintenance etc.
Comes with:• 4m water cooled Tig Torch• 4m remote control• earth lead and spare fuse
Specifications:Main Voltage: 415V Crater-Fill/Initial Current Range: 5 – 315 Amps Gas pre-flow time: 0.3/0.6 secPhase: 3PH Pulse/Base Current Range: 5 – 315 Amps Gas after-flow time: 3 – 20 secRated Input Power: 16kVA (10kW) Rated Output Voltage: 22.5V (STICK 32.6V) Pulse ratio: 15 - 85%Rated Output Current: 315 Amps Down slope time: 0.1 – 5 sec Pulse freqency: 0.5 – 15HzRated Duty Cycle: 40% Up slope time: 0.1 – 5 sec Dimensions: 642x348x592mmMax. Open Circuit Voltage: 57V Crater Filler Control: ON, OFF, Repeat Weight: 120kg
Features:• High Performance • Multi-mode • Pulsed DC TIG & DC STICK • Low Pulse control • Initial Current • Up slope, down slope & crater control • High effeciency DC Stick • Low spatter
5www.migomag.com.au16
OTC Pulse Tig WeldingSE
CTIO
N 2
AAVP300
aVP 300 hybrid Pulse tIgWelding Aluminium is easy and with high quality utilizing current wave form control. 18 types of Tig welding are attainable by combining basic waves forms (rectangular, sine & AC/DC hybrid). AC TIG arc with excellent concentration. Simplifies welding of dissimilar metals, different plate thickness or materials with gaps. Enhanced efficiency in ultra-thin sheet welding down to 0.3mm.
Comes with:• 4m 18 series water cooled
Tig Torch• 4m remote control• earth lead and spare fuse
Specifications:Main Voltage: 415VPhase: 3PHRated Input Power: 13.2kVADC Output Current Range: Tig 4 - 300 AmpsDC Output Current Range: Stick 10 – 250 AmpsAC Output Current Range: 20 – 300 Amps HighAC Wave Form/Standard: 10 – 300 AmpsAC Wave Form/Soft: 10 – 200 AmpsAC-DC Hybrid Output: 20 – 300 Amps HighCurrent Range: (AC Wave Form) 10 – 300 Amps StdCurrent Range: (AC Wave Form) 10 – 200 Amps SoftRated Load Voltage: AC Tig 22VRated Load Voltage: DC Tig 20VRated Load Voltage: DC Stick 30VInitial Crater-filler Current: 20 – 300 Amps AC HighInitial Crater-filler Current: 10 – 300 Amps AC StdInitial Crater-filler Current: 10 – 200 Amps AC SoftInitial Crater-filler Current: 4 – 300 Amps DCMax. no-load Voltage: 68VGas pre-flow: 0.3 secUp Slope: 0.1 – 5 secPulse Frequency: High: 10 – 500HzPulse Frequency: Low: 5 – 15HzAC-DC Changeover: 0.5 – 20 (Hyb Tig)Down Slope: 0.1 – 5 secArc Spot Timer: 0.2 – 5 secGas Post Flow: 3 – 30 secRated Duty Cycle: 40%Crater-Filler Control: On, Off, RepeatWeight: 83kgDimensions: 376x654x831mm
17
tIg & arc MachInes
www.migomag.com.au
SECTION 2OTC Pulse Tig Welding
To Find Your Nearest Migomag Weld Centre Please Visit
www.migomag.com.au
5www.migomag.com.au18
Plasma MachinesSE
CTIO
N 3
Migomags plasma range is manufactured in Europe keeping in mind the Australian workplace conditions. The plasmas are robust and reliable and have been manufactured using proven materials and components for tough Australian conditions.
ClassKEY:•=LightIndustrial•=Industrial•=HeavyIndustrial
PlasMa Machines Product guIdeProduct Page Part# Class QualityCut Severance Cutting Power Thickness Cut Current
MigomagJACKLEPlasma60 19 AAP60 • 15mm 20mm 60Amps 3Phase
MigomagJACKLEPlasma70 19 AAP70 • 20mm 25mm 20-70Amps 3Phase
MigomagJACKLEPlasma30-120 19 AAP30-120 • 35mm 45mm 30/60/90/120Amps 3Phase
19
PlasMa MachInes
www.migomag.com.au
SECTION 3
Features:• In built pressure regulator • HF-Ignition • Thermal Overload Protection • Robust and Reliable Design
MIgoMag Plasma 60air-cooled single-step Plasma cutting Machine
AAP60
AAP30-120
The Migomag Plasma 60 is a robust and reliable design that has excellent performance characteristics. Its constant cutting current of 60 Amps allows for cutting direct on thin sheet metal up to 20mm severance cut.
Specifications:Supply Voltage: 50HZ 415, 3PH Severance Cut: 20mmFuse: 20 Amps Slow System of protection: IP22Max Power Draw: 18kVA Insulation class: H (180ºC)Cutting Current: 60 Amps System of cooling: FOCV: 290V Compressed air supply: 5,5 bar, 160l/minDuty Cycle (20ºC) 50%: 60 Amps 140V Dimensions: 480x540x920mmQuality Cut: 15mm Weight: 75kg
Features:• Thyristor control • Step-less adjustable cutting current • Compressed air compatable • HF ingition • Thermostat controlled
• Low noise fan • Thermal overload protection • Robust & reliable design • Clear & service friendly • Switch & control system inside dust proof compartment
MIgoMag Plasma 70sair-cooled step-less Plasma cutting Machine
AAP70S
The Migomag Plasma 70S is a robust and reliable 3 phase machine that comes with thyristor control, and step-less adjustable cutting current.
Specifications:Supply Voltage: 50HZ 415, 3PH Severance Cut: 25mmFuse: 20 Amps Slow System of protection: IP22Max Power Draw: 19kVA Insulation class: H (180ºC)Cutting Current: 20 – 70 Amps System of cooling: FOCV: 250V Compressed air supply: 5,5 bar, 160l/minDuty Cycle (20ºC) 60%: 70 Amps 108V Dimensions: 530x610x810mmDuty Cycle (20ºC) 100%: 50 Amps 100V Weight: 95kgQuality Cut: 20mm
Features:• Compressed Air compatable • HF Ignition • Central connection with Plasma torch • Low noise fan
• Thermal overload protection • Thermostat controlled • Robust, reliable design • Clean & service friendly design
MIgoMag Plasma 30-120air-cooled step-switched Plasma cutting MachineThe Migomag Plasma 30-120 incorporates 4 cutting steps.
Specifications:Supply Voltage: 50HZ 415, 3PH Quality Cut: 35mmFuse: 40 Amps Slow Severance Cut: 45mmMax Power Draw: 30kVA System of protection: IP22Cutting Current: 30/60/90/120 Amps Insulation class: H (180ºC)OCV: 300V System of cooling: FDuty Cycle (20ºC) 40%: Compressed air supply: 5,5 bar, 230l/minDuty Cycle (20ºC) 70%: 120 Amps 128V Dimensions: 800x500x800mmDuty Cycle (20ºC) 100%: 90 Amps 116V Weight: 165kg
5www.migomag.com.au20
SECT
ION
4Cutting Machines
KoIKe IK-12BeetlePortable automatic gascutting Machine
The IK-12 beetle has been designed to be a highly compact and light unit without any loss of accuracy and capability. The easy to operate unit automatically cuts straight lines, circles and bevels.
Migomag have an affiliation with Japan's leading cut-ting machine corporation. Koike Japan offers a wide range of cutting machines for your needs. All units are manufactured to typical Japanese quality and advanced technological standards.
KoIKe IK-12 BeetleWith two torch set
IK12BEETLE/2
Enables parallel and bevel cutting with spacing of 80-300mm.
Standard Speed Acetylene Tips: Standard Speed LPG Tips:Tip Size: Plate Thickness Part # Tip Size: Plate Thickness Part #00 0mm – 5mm 102/00 00 0mm – 5mm 106/000 5mm – 10mm 102/0 0 5mm – 10mm 106/01 10mm – 15mm 102/1 1 10mm – 15mm 106/12 15mm – 30mm 102/2 2 15mm – 30mm 106/23 30mm – 40mm 102/3 3 30mm – 40mm 106/34 40mm – 50mm 102/4 4 40mm – 50mm 106/45 50mm – 100mm 102/5 5 50mm – 100mm 106/56 100mm – 150mm 102/6 6 100mm – 150mm 106/67 150mm – 250mm 102/7 7 150mm – 250mm 106/7
Comes with:• circle cutting attachment• counterweightOptional extras:• circle cutting attachment for
cutting circles from 30mm-2400mm (part # 60031858)
• additional 1.8m rail (part # PC18rail)
Specifications:Cutting Thickness: 5 – 50mm (1/4 – 2")Cutting Speed: 150 – 800mm (6 – 32")Motor: Condenser-induction AC 100/200V, 9W/10WPower Source: AC 100/200V, 50/60HzWeight: 9.5kg – one torch set
Comes with:• cutting torch• cutting adjustment brackets• extended racking bar• counterweight• gas distribution manifold• set of gas hoses• 1 Acelylene tip• tip cleaners & spanners
IK-12BEETLE
21
cuttIng MachInes
www.migomag.com.au
SECTION 4
KoIKe IK-600ccoordinate drive Flame shape cutting MachineThe IK-600C is a unique cutting machine. This two in one machine uses a combination of both portable and stationary type cutting machines. The IK-600C offers the individual respective advantages of both portable and stationary and can handle work which conventional portable machines are inadequate.
Comes with:• torch• #1 & #2 tips• tip cleaners• lighter• spanner• source lamps• fuses• 5m power cable• gas hose• cutting oxygen,
preheat oxygen, fuel gas
Features:• New revolutionary coordinate drive tracing system • HL-90 tracer - allows following edge of lines and patterns on a drawing optically • Moves in both X and Y directions • HL-90 tracer incorporates kerf compensations • Automatic lead in and Automatic off-line stop • Simplicity of operation • Operating functions in centralised front panel • Ease of relocation • Weighs only 35kg • Compact gas distribution unit • Solenoid valve flow control
IK-600C
Specifications:Tracing Range: Width 600mmTracing Range: Length 600mmCutting Range: Width 600mmCutting Range: Length 600mmMinimum torch spacing: 75mmNumber of torches: 2Cutting thickness capacity: 5 – 60mmCutting surface shape: Square cutting (l-shape)Straight line cutting: Possible. When 4 direction switch is used without energizing tracer head, machine will strip (parallel cut) in any of the 4 preselected directionsAutomatic lead-in: Possible in 4 directionsCutting Speed: 100 – 750mm/minTracer: HL-90 LinatrolDrive: Coordinate drive by X & Y motorsTracing: Circle scanning edge tracingLine width: 0.6mm & wider silhouette drawing is permissibleKerf compensation: ±1.5mmTracing accuracy: ±0.25mm deviation from edge of line on straight linePosition of control assembly: Right side of the machineTravel of the Machine: Roller friction travel controlled by DC servo motor with reduction gearCutting Oxygen: ON/OFF operations are performed by solenoid valvesCutting Oxygen Emergency: Works on any emergency, linked with the tracer shut off solenoid valvePower Source: Single PH AC 100V/115V, 50Hz/60HzOxygen/Fuel gas pressure: Pressure to be decided in accor dance with our cutting dataWeight: 35kg
IK54-D
KoIKe IK54-dautomatic gas shape cutting MachineThe IK-54D is a precision built gas cutter designed for high production accuracy. Cut-ting oxygen and motor can be actuated at the same time, and adjustment and control functions are located near the torch for optimal operators convenience. Template holder adjustment has been made easier and the powerful magnetic roller employed allows the use of templates that are thinner and therefore easier to make., without any mistakes, the cutting speed is kept stable by an S.C.R. control system.
Comes with:• size 1 acetylene tip• tip cleaners• wire brush• spanner & alignment device
Specifications:Cutting Thickness: 3 – 100mmCutting Accuracy: ±0.5mmEffective Circle Cutting: 30 – 700mm diadia with Attachments: 600 – 1700mm disEffective Cutting Circle: 30 – 600mmwith Attachments: 500 – 1200Cutting Speed: 100 – 1000mm/minPower: AC 240V
5www.migomag.com.au22
SECT
ION
4Cutting Machines
KoIKe handy autoautomatic gas shape cutting torch
BAAW0184
Hand operated automatic gas cutting torch for all types of cutting in any shape possible.
Comes with:• square cutting attachment• auxillary wheel for square cutting• bevelling wheel (32ºC-45ºC)• small circle cutting attachment• manual guide lever• 2 cutting tips• wrench and spare fuse
Specifications:Cutting Thickness: 5 – 50mm (.2 – 2")Cutting Speed: 200 – 700mm (8 – 28")Speed Control: Transistor controlWheel Drive: Friction driveMotor: DC 12V, 7200 rpmPower Source: AC 120/220V, /DC 12VWeight: 2.7kgTip: 100 series for any fuel gas
KoIKe handy auto Plus Kit
AAHAPK
The Koike Auto PLUS kit is a portable universal cutter. It is suitable for onsite operations due to its built-in auto ignition lighter.
Comes with:• standard wheel• auxillary wheel• bevelling wheel (32ºC-45ºC)• small circle cutting attachment• running guide lever• cutting tip 102 or 106• cutting tips #0, #1, #2• spanner for nozzle replacement• spare fuses• carry case
Specifications:Input Power: AC 100V-240VSpeed Control: Transistor controlDrive System: Friction DriveRunning Speed: 150 – 530mm/minCutting Thickness: 5 – 30mm (102 or 106 – #0, #1, #2)Overall Length: 500mmWeight: 3.5kgStandard Wheel: Attached to machine body
Features:• Ignition is achieved by simply pressing a lever • Exinguished by pressing reset-button • After valves for preheating flame are adjusted before operations, no longer a need to continuously adjust • 100% ignition with LP gas - in the past difficult • Safety aparatus is built in with preheating flame adjustment valves, once valves for preheating gas and preheating oxygen are set, the flame will remain unchanged even if the knob of the valves are moved
23
cuttIng MachInes
www.migomag.com.au
SECTION 4
Wel-handY MultItractor for MIg WeldingWith a wide range of torch positioning for horizontal and vertical fillet welding and high speed welding.
Wel-handY MultItwin torchtractor for MIg WeldingEquipped with twin torch capable of welding both sides of vertical plate with strong pulling power of 30kg.
TY-0518
Wel-handY MultItacKtractor for MIg WeldingEquipped with tack welding functions such as setting of welding length, rapid travel distance and crater porcessing conditions.
Wel-handY MultIWeaVIngtractor for MIg WeldingEquipped with weaving functions such as setting of amplitude, frequency and stop time.
Specifications:Operating Switches:
Torch Adjustment Range:Distance Setting (tack):Weaving Setting:
Time Setting:
Drive System:
Tracking Method:Guide Roller Height:Torch Angel:Torch UP/Down:Torch Fwd/Bwd:Torch:Torch Holder:Automatic Stop:Input Power:Weight:Dimensions:Pulling Power:Travel Speed:Unwelded Area:
Multi/Standard:Start/Stop, direction, travel speed setting knob, test arc
welding length 1 – 999mmdry run length 1 – 999mm reverse distance of crater processing 0 – 9.9mmArc time 0.1 – 9.9 sec crater processing 0.1 – 9.9 4 rubber wheel attached by permanent magnetVertical plate with guide20mm (adjust. 3 heights)40 – 55mm45mm45mmDedicated straigt torchFor the straight torchLimit switches both ends100V 50 – 60Hz6.9kg260x262x265mm16kg150 – 1,500mm/minStart 125 / End 140
Multi/Twin Torch:Start/Stop, direction, travel speed setting knob, test arc0 – 50mm
4 rubber wheel attached by permanent magnetVertical plate with guide20mm (adjust. 3 heights)40 – 55mm45mm45mmDedicated straigt torchFor the straight torchLimit switches both ends100V 50 – 60Hz16kg520x270x486mm30kg150 – 1,500mm/minStart & End approx. 267
Multi Track:Digital display, travel speed setting knob, power, tack test arc, direction, on/offwelding length 1 – 999mmdry run length 1 – 999mm reverse distance of crater processing 0 – 9.9mmArc time 0.1 – 9.9 sec crater processing 0.1 – 9.9 4 rubber wheel attached by permanent magnetVertical plate with guide20mm (adjust. 3 heights)40 – 55mm45mm45mmDedicated straigt torchFor the straight torchLimit switches both ends100V 50 – 60Hz6.8kg260x269x265mm16kg150 – 1,500mm/minStart 25 / End 140
Multi Weaving:Digital display, travel speed setting knob, power, tack test arc, direction, on/offAmplitude 3 – 20mmFrequency 3 – 120 p/min stop time (R, C, L) 0.1 – 9.9 secondsArc time 0.1 – 9.9 sec crater processing 0.1 – 9.9 4 rubber wheel attached by permanent magnetVertical plate with guide20mm (adjust. 3 heights)40 – 55mm45mm45mmDedicated straigt torchFor the straight torchLimit switches both ends100V 50 – 60Hz6.9kg300x295x265mm16kg150 – 1,500mm/minStart & End approx. 315
WHMTWINTCH
5www.migomag.com.au24
SECT
ION
4Cutting Tips
KoIKe PIcle Pipe cutterautomatic gas Pipe cutting Machine
AAPICLE-1
The Koike Picle, with smooth dependable drive, is ideal for accurate square and bevel edge circum-ferential flame cutting. Designed for optimum stability, the unit cuts pipes of a wide range of diameters and thicknesses with quick changeover between different diameters. The control valves are located near the operator and away from the heat. A graduated scale is provided for accurate bevelling.
Specifications:Cutting Thickness: Up to 50mmPipe Diameter: 114 – 600mm for over 600mm additional chain availableWeight: 9kg
KoIKe auto PIcle Pipe cutterMotorised Pipe cutter
AAAUTOPICLEThe Auto Picle is a portable auto cutting ma-chine designed to improve labour savings and includes all the best features of the Picle.
Specifications:Pipewall Thickness: 5 – 50mmCutting Speed: 100 – 700mm/minPipe Diameter: 150 – 600mm for over 600mm additional chain availableBevel Angle: Up to 45ºPower Source: 240VWeight: 9kg
MonograPh 1650 Plasma cuttercnc Plasma cutting Machine
AAC1650
The latest in Plasma cutting machines, this com-pact and complete unit allows quick and easy installation. The CNC control is easy to operate with multi-track function possibilities. The unit is equipped with a plasma power source with ad-vanced, intelligent technology, which gives power to cut with great speed, quality and efficiency.
Specifications:Effective Cutting Area: 1500 x 3000mmMax Plate Thickness: 19mmRapid Traverse Speed: 36,000mm/minWeight: 1135kgDimensions: 1,620x2115x4850mm
25
cuttIng MachInes
www.migomag.com.au
SECTION 4
KoIKe 3 seat gas cutting tipsQuality tips assure more accurate, economical and safer cuttingKoike has gained a world wide reputation as a lead-ing manufacturer in the field of gas cutting machines, especially in relation to their tips, which Koike con-sider the core of the cutting machine. Since the tip is the essential part of the gas-cutting machine, a poor quality tip cannot produce quality cutting no matter how good the cutting machine is.
Features:• Reduced upper and under slag • Limited under edge melting • Small kerf • Cutting with higher speeds
• Steady and safe cutting functions • Cutting with reduced gas • Extra high speed 106DZ divergent nozzles with stainless steel inserts for improved performance and nozzle life
standard speed acetylene tipsPlate thickness: tip: Part #: Pressure kg/cm2: Consumption ni/hr: Preheat Fuel Cut speed size: oxy: Fuel gas: Cutting oxygen: oxygen: gas: mm/min:0mm – 5mm 00 102/00 1.5 0.2 690 410 370 -6605mm – 10mm 0 102/0 2.0 0.2 1200 410 370 660 – 55010mm – 15mm 1 102/1 2.5 0.2 2100 480 430 550 – 49015mm – 30mm 2 102/2 3.0 0.2 3400 480 430 490 – 40030mm – 40mm 3 102/3 3.0 0.2 4300 480 430 400 – 35040mm – 50mm 4 102/4 3.5 0.25 6500 550 500 350 – 32050mm – 100mm 5 102/5 4.0 0.30 11000 690 630 320 – 200100mm – 150mm 6 102/6 4.0 0.35 15000 770 700 200 – 150150mm – 250mm 7 102/7 4.5 0.4 22000 1060 960 150 – 80250mm – 300mm 8 102/8 4.5 0.4 28000 1060 960 80 – 45standard speed LPg tipsPlate thickness: tip Part #: Pressure kg/cm2: Consumption ni/hr: Preheat Fuel Cut speed size: oxy: Fuel gas: Cutting oxygen: oxygen: gas: mm/min:0mm – 5mm 00 106/00 1.5 0.2 690 1180 310 -6605mm – 10mm 0 106/0 2.0 0.2 1200 1180 310 660 – 55010mm – 15mm 1 106/1 2.5 0.2 2100 1180 310 550 – 49015mm – 30mm 2 106/2 3.0 0.25 3400 1370 360 490 – 40030mm – 40mm 3 106/3 3.0 0.25 4300 1370 360 400 – 35040mm – 50mm 4 106/4 3.5 0.3 6500 1860 490 350 – 32050mm – 100mm 5 106/5 4.0 0.3 11000 1860 490 320 – 200100mm – 150mm 6 106/6 4.0 0.3 15000 3040 800 200 – 150150mm – 250mm 7 106/7 4.5 0.4 22000 3270 980 150 – 80250mm – 300mm 8 106/8 4.5 0.4 28000 3270 980 80 – 45Plated LPg high speed tipsPlate thickness: tip Part #: Pressure kg/cm2: Consumption ni/hr: Preheat Fuel Cut speed size: oxy: Fuel gas: Cutting oxygen: oxygen: gas: mm/min:0mm – 5mm 00 P106/00 7.0 0.2 750 1180 310 -6605mm – 10mm 0 P106/0 7.0 0.2 1100 1180 310 750 – 68010mm – 15mm 1 P106/1 7.0 0.2 2500 1180 310 680 – 60015mm – 30mm 2 P106/2 7.0 0.25 3800 1370 360 600 – 50030mm – 40mm 3 P106/3 7.0 0.25 5400 1370 360 500 – 45040mm – 50mm 4 P106/4 7.0 0.3 7300 1860 490 450 – 40050mm – 100mm 5 P106/5 7.0 0.3 10000 18600 490 400 – 260100mm – 150mm 6 P106/6 7.0 0.3 14000 3040 800 260 – 180150mm – 250mm 7 P106/7 7.0 0.4 22000 3720 980 180 – 100250mm – 300mm 8 P106/8 7.0 0.4 35000 3720 980 100 – 70standard high speed LPg tipsPlate thickness: tip Part #: Pressure kg/cm2: Consumption ni/hr: Preheat Fuel Cut speed size: oxy: Fuel gas: Cutting oxygen: oxygen: gas: mm/min:0mm – 5mm 00 106Z5/00 5.0 0.2 850 1180 310 -7005mm – 10mm 0 106Z5/0 5.0 0.2 1600 1180 310 770 – 62510mm – 15mm 1 106Z5/1 5.0 0.2 2400 1180 310 625 – 55015mm – 30mm 2 106Z5/2 5.0 0.25 3600 1370 360 550 – 47530mm – 40mm 3 106Z5/3 5.0 0.25 4300 1370 360 475 – 42540mm – 50mm 4 106Z5/4 5.0 0.3 5600 1860 490 425 – 35050mm – 100mm 5 106Z5/5 5.0 0.3 8800 1860 490 350 – 250100mm – 150mm 6 106Z5/6 5.0 0.3 13500 3040 800 250 – 175150mm – 250mm 7 106Z5/7 5.0 0.4 24000 3720 980 175 – 90250mm – 300mm 8 106Z5/8 5.0 0.4 31000 3720 980 90 – 60 CUTTIP 102CUTTIP 106
CUTTIP 106D7
CUTTING TIPS
5www.migomag.com.au26
SECT
ION
5Spot Welders
MIller hand held sPot WelderThis lightweight, air-cooled unit is portable, easy to operate and provides a quick and effective means for spot welding mild, galvanised and stainless materials. It is an excellent choice for maintenance work and spot welding applications that require portability and lower amperage welding.
MR900377
Features:• Spot welding capacity up to 4.7mm combined • Accomodates a wide variety of tongs and tips • Hand lever locks tongs firmly on materials,
ensures positive, accurate fit-up• Quick and easy adjustment for material
thickness• Reversible for left or right operation
Specifications:
Input: 240V 20 Amps
Output at 60% DC: 2.5VA
Rated out put with
305mm tongs: 5800 Amps
Work capacity with
305mm tongs: 4.7mm combined thickness
Max open circuit V: 2.5V
Dimensions: 152x63x406mm
Weight: 14kg
27
arc WeldIng electrodes
www.migomag.com.au
SECTION 6KOBE Electrodes
arc Welding electrodes Product guIde
Product Page Part# Standard/Grade
KobeElectrodesKobeRB-26 28 RB26/ AWSA5.1E6013KobeLB-5218 28 LB5218/ AWSA5.1E7018KobeLB-52U 28 LB52U/ AWSA5.1E7016Kobe6010 28 6010/ AWSA5.1E6010
KiswelSteelElectrodesKiswelK7014 29 K7014/ AWSE7014ApprovedbyABS,KR,LR,NK,CBW,JIS
KiswelCastIronElectrodesKiswelKFN-50 29 KFN-50/ AWSENife-CIKiswelKSN-100 29 KSN-100/ AWSENi
KiswelStainlessSteelElectrodesKiswelKST-316L 30 KST316L/ AWSE316L-16ApprovedbyABS,BV,DNV,GL,KR,LR,CWB,TUVKiswelKST-308L 30 KST308L/ AWSE308L-16ApprovedbyABS,BV,GL,KR,LR,CWB,TUVKiswelKST-309L 30 KST-309L/ AWSE309L-16KiswelKST-312 30 KST312/ AWSE312-16
KiswelHardFacingElectrodesKiswelKM-350 31 KM-350/KiswelKM-700 31 KM-700/KiswelKM-800 31 KM-800/
5www.migomag.com.au28
Arc Welding ElectrodesSE
CTIO
N 6
KOBE ELECTRODES
KoBe rB-26aWs a5.1 e6013The RB26 versatile general-purpose, mild steel electrode is a high titania type covered electrode, A very stable arc with little spatter gives it a lustrious bead. • All positional electrode
Sizes available and recommended currents (AC, DP-EP or DC-EN):Dia (mm) 2.0 2.6 3.2 4.0 5.0Length (mm) 300 350 350 400 400Amp. F & VD 30-65 45-95 60-125 105-170 150-220Amp. VU & OH 30-65 45-95 60-125 100-150 125-190
KoBe lB-5218aWs a5.1 e7018The LB-5218 is an iron powdered low hydrogen electrode for weld-ing mild steel and 190N/mm2 high tensile steels. Usability is best when using DC+ among low hydrogen type electrodes.
Sizes available and recommended currents (AC, DP-EP or DC-EN):Dia (mm) 2.6 3.2 4.0 5.0Length (mm) 350 400 450 450Amp. F 65-95 90-130 130-190 190-250Amp. V & OH 60-90 80-120 110-170 165-210
KoBe lB-52uaWs a5.1 e7016The LB52U is alow hydrogen electrode for mild steel and up to 490N/mm2 high tensile steel. Arc stability is extremely good to perform one-sided welding with relatively low currents. LB52U provides good slag resolvability and smooth weld beads.
Sizes available and recommended currents (AC, DP-EP or DC-EN):Dia (mm) 2.6 3.2 4.0Length (mm) 350 400 400Amp. OSW 30-80 60-110 90-140Amp. F 60-90 90-130 130-180Amp. V & OH 50-80 80-120 110-170
KoBe 6010aWs a5.1 e6010The K6010 is a high cellulose type electrode for API grades up to X52 steels on DC current only. It is suitable for all-position welding of pipes and general structures. Weld penetration is deeper and less slag makes welding manipulation easier. Porosities are not easily formed and X-ray soundness is better.
Sizes available and recommended currents (AC, DP-EP or DC-EN):Dia (mm) 2.4 3.2 4.0 4.8Amp. F 40-75 70-130 90-180 140-225Amp. V & OH 40-75 70-130 90-180 140-225
Typical chemical composition of Kobe Rods (%): C si mn P sB-17 0.09 0.08 0.6 0.012 0.006RB26 0.08 0.3 0.37 0.012 0.010LB52U 0.08 0.64 0.86 0.012 0.008LB5218 0.07 0.59 0.97 0.013 0.007K6010 0.12 0.18 0.51 0.009 0.010ZERODE 27 0.07 0.41 0.69 0.018 0.010
Typical mechanical properties of weld metal: yP t-s ei i.v. n/mm2(kgf/mm2) n/mm2(kgf/mm2) % J(kgf.m)B-17 0.09 470(48) 31 110(11)RB26 0.08 510(52) 25LB52U 0.08 560(57) 31 130(13)LB5218 0.07 560(57) 31 210(21)K6010 0.12 490(50) 27 70(7.1)ZERODE 27 0.07 500(51) 30 78(8.0)
KIsWel K7014aWs e7014 approved by aBs, Kr, lr, nK, cBW, JIs
Semi Iron Powder coated all position electrode for mild and medium tensile steels. K7014 proves high efficiency in single and multiple pass welding and has excellent slag removal and good bead appearance. Migomag also stocks a range of Kiswel cellulose (6010 & 6011) and full iron powder (7024) electrodes.
Typical chemical composition of all-weld-metal (%):C si mn P s0.08 0.35 0.6 0.015 0.01
Typical mechanical properties of all-weld-metal:y.P t.s ei Charpy v-notchn/mm2 (kgf/mm2) n/mm2 (kgf/mm2) (%) J (kgf.m) (-20ºC)470(48) 550(56) 30 80(8)
KIsWel KFn-50aWs enife-cIThe KFN-50 Graphite type electrode is typically used in joining of spheroidal graphite cast iron, repairing of cast iron products such as cylinder covers, motor beds, casings and gears. KFN-50 is conveniently supplied in 2kg packets.
Characteristics on usage:• Good crack resistance and mechanical properties • Preheat at 150-300ºC • Temp to be applied varies in accordance with kind, size and shape of base plate • Re-dry the electrode at 100-130ºC for 30-60 min prior to use
Sizes available and recommended currents (AC OR DC+):Dia (mm) 2.6 3.2 4.0Length (mm) 300 350 350Amp. 60-90 80-120 120-150
KIsWel Ksn-100aWs eni-cIGraphite type KSN-100 electrode is generally used for repairing and joining of various kinds of cast iron products such as cylinder covers, motor beads, casings and gears. Also repairing of mee-hanite cast iron, alloy cast iron and malleable cast iron. KSN-100 electrodes are conveniently supplied in 2kg packets.
Characteristics on usage:• Easily machinable deposited weld metal • Chip off base place completely at the repairing part • Preheat at 150-200ºC • Temp to be applied varies in accordance with kind, size and shape of base plate
Sizes available and recommended currents (AC OR DC+):Dia (mm) 2.6 3.2 4.0Length (mm) 300 350 350Amp. 60-90 70-110 110-130
Typical chemical composition of all-weld-metal (%): C si mn P sKFN-50 0.08 0.36 1.45 Rem 55.5KSN-100 0.55 0.4 0.35 0.85 Rem
Typical mechanical properties of all-weld-metal: ts hardness Charpy v-notch n/mm2(kgf/mm2) hv hv hsKFN-50 550(56) 180-210 171-200 110(11)KSN-100 420(43) 160-190 25
KISWELL STEEL ELECTRODES
KISWELL CAST IRON ELECTRODES
29
arc WeldIng electrodes
www.migomag.com.au
SECTION 6Kiswell Electrodes
5www.migomag.com.au30
Stainless Steel ElectrodesSE
CTIO
N 6
KISWEL STEEL ELECTRODES
KIsWel Kst-316laWs e316l-16approved by aBs, BV, dnV, gl, Kr, lr, cWB, tuV
The KST-316L electrode is a lime titania coated electrode used in welding low carbon 18%CR-12%Ni-Mo stainless steels and certain other austenitic stainless steels. The electrode has good crack resistance and usability because of austenitic structure with suitable ferrite in the deposited weld metal. And as low carbon welded metal can be obtained, intergranular corrosion resistance is superior to that of the 316 type.
Typical chemical composition of all-weld-metal (%):C si mn Cr ni mo0.03 0.72 1.08 18.4 12.5 2.3
Typical mechanical properties of all-weld-metal:y.P ei 5% h2s04 boilingn/mm2 (kgf/mm2) (%) 550(56) 44 5.0g/m2 hr
Sizes available and recommended currents (AC or DC+):Dia (mm) 2 2.6 3.2 4.0 5.0Length (mm) 250 300 350 350 350Amp. F 40-50 55-70 80-110 110-140 140-180Amp. V & OH 35-45 45-60 70-90 80-120
KIsWel Kst-308laWs e308l-16approved by aBs, BV, gl, Kr, lr, cWB, tuV
Lime titania type coated KST-308L electrodes are used for welding of low carbon 18%CR-8%Ni stainless steel (AISI (SUS) 304L). Due to the deposition rate this electrode achieves excellent welding efficiency.
Typical chemical composition of all-weld-metal (%):C si mn Cr ni0.03 0.76 1.18 18.8 9.5
Typical mechanical properties of all-weld-metal:y.P ei 40% hn03 boilingn/mm2 (kgf/mm2) (%) 550(56) 44 0.06g/m2 hr
Sizes available and recommended currents (AC or DC+):Dia (mm) 2.6 3.2 4.0Length (mm) 300 350 350Amp. F 55-80 90-130 110-130Amp. V & OH 45-60 70-90 90-130
KIsWel Kst-309laWs e309l-16Lime titania coated KST-309L electrode is typically used for weld-ing of 22%CR-12%NI steel an heat-resisting castings and clad stainless steel. Additionally the welding of dissimilar metal such as carbon steel to stainless steel. As it's deposited weld metal has austentic structure, with suitable ferrite, crack resistance is good and intergranular corrosion resistance is superior to that of E309 type.
Typical chemical composition of all-weld-metal (%):C si mn Cr ni0.03 0.71 1.34 23.7 12.6
Typical mechanical properties of all-weld-metal:y.P ei 40% hn03 boilingn/mm2 (kgf/mm2) (%) 550(56) 44 0.06g/m2 hr
Sizes available and recommended currents (AC or DC+):Dia (mm) 2.6 3.2 4.0Length (mm) 300 350 350Amp. F 55-80 80-110 110-150Amp. V & OH 45-60 70-90 90-130
KIsWel Kst-312aWs e312-16The KST-312 electrode is lime titania coated and used for welding of 29%CR-9%Ni type cast steels and difficult to weld steels. Also joint welding and hardfacing of stainless steel and heat resisting steels. The electrode has good crack resistance due to the high quality of ferrite in the deposited weld metal.
Typical mechanical properties of all-weld-metal:t.s. ein/mm2 (kgf/mm2) (%) 770 (79) 24
Sizes available and recommended currents (AC or DC+):Dia (mm) 2.6 3.2 4.0Length (mm) 300 350 350Amp. F 40-80 70-110 110-140Amp. V & OH 35-75 70-90 80-120
KIsWel KM350This low hydrogen electrode is typically used in the hard facing of fans, upper rollers, shafts and sprockets.
Characteristics on usage:• Machinable • Hardness increases by quenching after matching • Suitable for intermetallic abrasions and moderate impact abrasion • Re-dry the electrode at 300-350ºC for 30-60 min prior to use
Typical chemical composition of all-weld-metal (%):C si mn Cr0.36 0.65 0.74 2.0
Typical hardness of all-weld-metal: Conditions HV HRC HSAs welded Interpass temperature 150ºC 356 36.1 49 900ºC oil quenching 440 44.5 59Heat treated 650ºC stress relief 300 29.8 42
Sizes available and recommended currents (AC OR DC+):Dia (mm) 3.2 4.0 5.0Length (mm) 350 400 400Amp. 90-130 140-180 190-240
KIsWel KM-700The KM-700 low hydrogen electrode is used in hard facing of cutter knives, dedgers and mixers.
Characteristics on usage:• The deposited weld metal has martensite structure • For multi-layer build up it is advantageous to use low hydrogen carbon steel electrodes as an underlay • Pre-heat at 150ºC and post heat at 600ºC
KIsWel KM-800The KM-800 Kiswel hardfacing electrode is a low hydrogen electrode typically used in hardfacing of impellers and pump casings.
Characteristics on usage:• The deposited weld metal has an extremely hard martensite structure • Non-machinable • Preheat at 200ºC • Post heat at about 600ºC immediately after welding • Re-dry the electrode at 300-350ºC for 30-60 minutes prior to use
Typical chemical composition of all-weld-metal (%):C si mn Cr0.48 0.8 1.45 4.4
Typical hardness of all-weld-metal: Conditions HV HRC HSAs welded Interpass temperature 200ºC 688 59.6 81Heat treated Post heat 600ºC 585 54.4 73
Sizes available and recommended currents (AC OR DC+):Dia (mm) 3.2 4.0 5.0Length (mm) 350 400 400Amp. 90-130 140-170 190-240
Typical chemical composition of all-weld-metal (%):C si mn Cr1.4 0.5 1.23 5.7
Typical hardness of all-weld-metal: Conditions HV HRC HSAs welded Interpass temperature 150ºC 723 61.1 83As welded Interpass temperature 300ºC 810 64.4 89Heat treated 650ºC Stress relief 535 51.4 69
Sizes available and recommended currents (AC OR DC+):Dia (mm) 3.2 4.0 5.0Length (mm) 350 400 400Amp. 90-130 140-170 190-240
31
hard FacIng electrodes
www.migomag.com.au
SECTION 6
5
SECT
ION
7
www.migomag.com.au32
Semi-Automatic Mig Wires
KIsWel Kc-28 Premium Mig WireaWs a5.18 er70s-6Approved by ABS, BV, DNV, GL, KR, LR, NK, CWB, TUV, CCS, KS, JIS(80% Ar + 20% CO2:ABS, TUV)
KC-28 Mig wire is typically used for welding low to medium strength low alloy steels. Available in 1kg, 5kg, 15kg spools and 250kg, 300kg Pail packs. This premium wire is suitable for high-speed automatic and manual welding in all positions with stable arc and low spatter generation. Flow quantity of shielding gas should be 15 to 20 l/min in general. For best performance use windscreen against wind and keep the distance between tip and base metal within 6 - 15mm for 250AMP and under or within 15-25mm for 250AMP and over of welding current. Can be used with mixed gases.
KISWEL KC-28
Typical chemical composition of all-weld-metal (%):shielding gas C si mn P sC02 0.08 0.5 1.05 0.014 0.01Ar + 20% CO2 0.07 0.52 1.1 0.014 0.01
Typical chemical composition of all-weld-metal (%):shielding gas y.P t.s ei Charpy v-notch i.v n/mm2 (kgf/mm2) n/mm2 (kgf/mm2) (%) J(kgf.m)(-29ºC)CO2 450(46) 550(56) 30 70 (7)Ar + 20% CO2 480(49) 580(59) 28 80 (8)
Sizes available and recommended currents (AC or DC+):Dia (mm) 0.6 0.8 0.9 1.0 1.2 1.6Amp. F 40-150 40-180 50-200 70-250 100-350 200-550Amp. V & OH 40-100 40-120 50-120 50-150 50-180 120-300 Part Numbers: 0.6mm 0.8mm 0.9mm 1.0mm 1.2mm 1.6mm1kg Spools KC284/06 KC284/085kg Spools KC288/06 KC288/08 KC288/0915kg Spools KC28/06 KC28/08 KC28/09 KC28/10 KC28/12 KC28/16
KIsWel coPPer Free Mig WireaWs er70s-6, JIs YgW 12KC28 Copper Free wire is typically used for single arc or tandem application. It is suitable for butt and fillet welding in all positions.
KISWEL KC-28 COPPER FREE WIRE
Typical chemical composition of all-weld-metal (%):shielding gas C si mn P s100% C02 0.08 0.5 1.05 0.014 0.01Ar + 20% CO2 0.07 0.52 1.1 0.014 0.01
Typical chemical composition of all-weld-metal (%):shielding gas y.P t.s ei Charpy v-notch i.v n/mm2 (kgf/mm2) n/mm2 (kgf/mm2) (%) J(kgf.m)(-29ºC)100% CO2 465 556 30 90Ar + 20% CO2 480 580 29 100
Sizes available and recommended currents (AC or DC+):Dia (mm) 0.8 0.9 1.0 1.2 1.6Amp. F 50-120 50-200 70-250 100-350 200-550Amp. V & OH 20-100 50-120 50-150 50-180 120-200 Part Numbers: 0.8mm 0.9mm 1.0mm 1.2mm 1.6mm15kg Spools KC28CF/08 KC28CF/09 KC28CF/10 KC28CF/12 KC28CF/16
Features:• Great feed ability at low and high amps• Longer torch consumable life,
i.e. contact tips and liners• Greater productivity especially for
automated processes
• Excellent for mild steel and galvanised materials
• Safer to weld with as it produces less hazardous fumes and low spatter
KIsWel PaIl PacKshoods & conduct cable
Kiswell the leading manufac-turer of high-speed wires and reliable pail feed systems. To compliment the Pail Pack Migomag have a full range of top quality Japanese Pail Pack hoods for 510mm and 663mm diameter drums. Migomag supply a unique feed conduit, which fits all machines, never requires replacing and has a no hassle inner liner to clog. Liner available in 1,2,3 and 5 meter lengths.
Part Numbers: 0.9mm 1.0mm 1.2mm 1.6mm250kg Pails KC28P/09 KC28P/10 KC28P/12300kg Pails KC28P/160.5% Mo Alloy250kg KC80S-D2P/12250kg Pails KC28CFP/09 KC28CFP/10 KC28CFP/12
K-NGS GASLESS WIRE
MIgoMag gen 2 Mig Wire - 15kg spoolsaWs er70s-6, JIs Z3312, YgW12, Ks d 7025 YgW12, en 440 g3silThe new Gen II Copper coated, low carbon steel Mig wire suitable for mild and medium strength steels. M76 is for positional welding. It is available in 15kg spools in 0.9mm and 1.2mm.
KISWEL PAIL PACK
K-ngs selF shIeldIng gasless WireaWs e71t-gs (dc-Preferred)
Typical chemical composition of all-weld-metal (%):C si mn P s ai0.22 0.38 0.71 0.011 0.008 1.3
Typical mechanical properties of all-weld-metal (%):Transverse Tension test 520N/mm2
Longitudinal guided bend test No defects
Part Numbers: 0.8mm 0.9mm 1.2mm 1.6mm0.9kg Spools KNGS4/08 KNGS4/094.5kg Spools KNGS8/08 KNGS8/0915kg Spools KNGS/12 KNGS/16
Kiswel self shielding gasless wire operates best with DC, but can also be used with DC+. Typically used for lap and fillet welding on thin gauge galvanised and carbon steel in all welding positions and multi pass welding applications. K-NGS gives an excellent welding performance, a smooth arc action, full slag covering and easy slag removal. Available in 0.9kgs, 4.5kgs & 15kgs. Available in 0.8mm, 0.9mm, 1.2mm and 1.6mm diameter wire size.
MIGOMAG GEN 2 MIG WIRE
33
MIg WIres
www.migomag.com.au
SECTION 7
5
SECT
ION
7
www.migomag.com.au34
Semi-Automatic Mig Wires
KIsWel K-71tlF Flux cored c02 WireaWs a5.20 e71t-IApproved by ABS, BV, DNV, GL, KR, LR, NK, TUV, CCS, KS, JIS
K-71TLF is typically used for butt and fillet welding of mild steel and 490N/mm2 class high tensile strength steel for machinery, cars, ship buildings and bridges. Can be used in all positions, has great working efficiency, excellent feed ability and stable arc and low spatter generation.
KISWEL K-71TLF
Typical chemical composition of all-weld-metal (%):shielding gas y.P ei s n/mm2 (kgf/mm2) n/mm2 (kgf/mm2)CO2 0.03 0.3 1.45 0.015 0.01
Typical chemical composition of all-weld-metal (%):shielding gas y.P t.s ei Charpy v-notch i.v n/mm2 (kgf/mm2) n/mm2 (kgf/mm2) (%) J(kgf.m)(-29ºC)CO2 510(52) 550(56) 28 60 (6)(-180ºC)
KIsWel K600ht & K700ht hard Facing Flux cored WiresK600HT & K700HT had flux cored wires are designed to be used with CO2 or a 75% Argon 25% CO2 gas mix. They can be used at low amps, for example 1.2mm can be used with a single phase Mig at only 180amps. Both wires are available in 1.2mm or 1.6mm diameter and use DC+ current.
KISWEL K700HT
Typical chemical composition: C si mn Cr mo wK600HT 0.25 2.18 0.36 6.5 0.03 -K700HT 0.3 2.4 0.5 7 - 0.7
Typical hardness Typical Application: of all-weld-metal:K600HT 590VH For wear & abrasion, hardfacing of shafts, 55RC bulldozers blades and bucketK700HT 690VH For wear & abrasion, hardfacing of rollers, 60RC conveyers, screws and empellers etc.
Part Numbers: 1.2mm 1.6mmK600HT 20kg Spools K600HT/12 K600HT/16K700HT 20kg Spools K700HT/12 K700HT/16
Sizes available and recommended currents (AC or DC+):Dia (mm) 1.2mm 1.6mmAmp. F 120-300 200-450Amp. H-fillets 120-300 200-400Amp. V 120-250 180-220 Part Numbers: 1.2mm 1.6mm1kg Spools K71TLF/12 K71TLF/16
www.migomag.com.au
SECTION 7
MIg WIres
35
Semi-Automatic Mig Wires
Used for butt and fillet welding of mild steel and 50kg/mm2 class high tensile steel on ship hulls, vehicles, buildings and bridges. High weld current (220-280Amp) can be used in all position welding. Less spattering and good slag resolvability. Depositing rate is high com-pared with solid wire. When using mixed gas, a CO2 content of 25% is recommended. DW-50 is approved Grade 3 for mild steel and 50kg/mm2 class high tensile steel by LR, NV, GL. Comes in 1.2mm and 1.6mm wire diameters.
DW-50
Typical chemical composition of weld-metal (%):C si mn P s 0.05 0.48 1.22 0.0013 0.009
Typical mechanical properties of weld-metal (%):0.2%os t.s ei i.vn/mm2 (kgf/mm2) n/mm2 (kgf/mm2) (%) J(kgf.m)510(52) 570(58) 30 110(11)
Sizes available and recommended currents (DC-EP):Dia (mm) 1.2mm 1.6mmAmp. F 120-300 180-450Amp. VU & OH 120-260 180-280Amp. VD 200-300 250-300Amp. HF 120-300 180-400Amp. H 120-280 180-350
Part Numbers: 1.2mm 1.6mm20kg Spools DWA50/12 DWA50/16
dW-50 KoBe forco2 & Mixed gas WeldingaWs a5.20 e71t-1 as2203.1: etP-gcp-W503a.cMI
Typical chemical composition of weld-metal and diffusible hydrogen (%):C mn si P s diffusible hydrogen Content (ml/100g)0.04 1.4 0.67 0.012 0.009 4.2
Typical mechanical properties of weld-metal (%):yield strength tensile strength elongation Reduction impact value Jn/mm2 n/mm2 % area % 0ºC -20ºC510 590 30 69 130 100
Part Numbers: 1.2mm 1.6mm15kg Spools DW50/12 DW50/16
DWA-50 is a Titania flux cored wire applicable for all position welding including vertical down by Ar-CO2 shielding gas. It is used for welding mild steel & 490N/mm2 high tensile steel. DWA-50 provides excellent usability with soft stable arc, less spattering, better bead appearance, better slag removal and less welding fume. It can be used in all positions without weld-ing machine adjustment from approximately 220 to 255 amps.
dWa-50 KoBeFlux cored Wire(mixed gas) aWs a5.20 e71t-1M
KoBe MXa-100 Flux cored Wire(Mixed gas) aWs a5.20 e70t-IM
Typical chemical composition of weld-metal (%):C si mn P s 0.05 0.63 1.58 0.0017 0.011
Typical mechanical properties of weld-metal (%):yP t.s ei i.vn/mm2 (kgf/mm2) n/mm2 (kgf/mm2) (%) J(kgf.m)450(46) 550(56) 33 98(10)
Sizes available and recommended currents (DC-EP):Dia (mm) 1.2mm 1.6mmAmp. F 150-350 250-500Amp. H, HF 150-300 250-450
Part Numbers: 1.2mm 1.6mm20kg Spools MXA100/12 MXA100/16
A metal type flux cored wire is used with Ar-CO2 gas mixture. MXA-100 is used for butt and fillet welding of mild steel and 190N/mm2 high ten-sile steel. A high deposition rate of 10 to 30% can lower costs. The arc stability is excellent and optimum current range for spray transfer arc is wider with low spatter. Little slag is produced which makes it possible to accomplish continuous multi-pass welding without slag removal.
MXA-100
Typical chemical composition of weld-metal (%):C si mn P s 0.05 0.45 1.35 0.0013 0.009
Typical mechanical properties of weld-metal (%):0.2%os t.s ei i.vn/mm2 (kgf/mm2) n/mm2 (kgf/mm2) (%) J(kgf.m)510(52) 570(58) 30 110(11)
Sizes available and recommended currents (DC-EP):Dia (mm) 1.2mm 1.6mmAmp. F 120-300 180-450Amp. VU & OH 120-260 180-280Amp. VD 200-300 250-300Amp. HF 120-300 180-400Amp. H 120-280 180-350
Part Numbers: 1.2mm 1.6mm20kg Spools DW100/12 DW100/16
A Titania flux cored wire applicable for all position welding including ver-tical down by CO2 shielding gas. DW-100 is used for welding mild steel & 50kgf/mm2 high tensile steel. It provides excellent usability with soft stable arc, less spattering, better bead appearance, better slag removal and less welding fume, and is efficient welding due to high deposition rates.
dW-100 KoBe for co2 WeldingaWs a5.10 e71t-1
DW-100
5
SECT
ION
7
www.migomag.com.au36
Semi-Automatic Mig Wires
www.migomag.com.au
SECTION 7
MIg WIres
37
Semi-Automatic Mig Wires
MIgoMag 5356aWs a5.10 er 5356AL5%Mg Wire for welding wrought or cast aluminium alloys containing magnesium as the major alloy element. Suitable for welding selected grades of wrought AL.Mg alloys including 5083, 5454 and 5456.
Part Number 0.9mm 1.0mm 1.2mm 1.6mm0.5kg Spool 5356M 5356M41/09 5356M41/10 5356M41/120.5kg Spool 4043M 4043M41/122kg Spool 5356M 5356M81/10 5356M81/127kg Spool 5356M 5356M/09 5356M/10 5356M/12 5356M/167kg Spool 4043M 4043M/127kg Spool 5183M 5183M/12
Wire dia Current (Amps) Voltage0.9mm 80-180 16-221.0mm 110-220 17-231.2mm 150-250 20-251.6mm 200-350 23-28
MIgoMag 4043aWs a5.10 er 4043AL5%Mg Wire for welding wrought aluminium alloys with up to 2% alloy additions, and aluminium alloy casting with up to 7% silicon.
Wire dia Current (Amps) Voltage0.9mm 90-130 17-191.0mm 100-140 17-191.2mm 150-250 20-251.6mm 200-350 23-28
Wire dia Current (Amps) Voltage1.2mm 120-150 24-29
MIgoMag 5183aWs a5.10 er 5183Aluminium wire with Mg, Mn and Cr. Used for welding 5083 materials in an annealed condition. Especially for low temperature applications, where good ductility and toughness are required: i.e. cryogenic and boat building.
Migomag Aluminium Mig wire range produces a smooth consistent wire feed. The wire conforms to International Standards in both quality and precision. Migomag wires are precision layer-wound and double mechanically shaved with a perfect clean finish.
aluMInIuM MIg WIre
5www.migomag.com.au38
SECT
ION
8
KIsWel steel tIg & oXY rodtgs-50 aWs er70s-6TGS-50 is used for gas and Tig welding on all grades of carbon steel. It is gener-ally used in root pass welding of pipes in all positions. It has excel-lent mechanical and toughness properties in low temperature conditions. Available in 1.6mm & 2.4mm diameters.
KISWEL TGS-50
Tig & Gas Filler Wires
Typical chemical composition of Rod (%): C mn si P sTGS-50 0.07 0.82 1.52 0.01 0.01TGS-70S 0.05 0.5 1.09 0.006 0.007 Typical mechanical properties of all-weld-metal (%):shielding gas y.P t.s ei Charpy v-notch i.v n/mm2 (kgf/mm2) n/mm2 (kgf/mm2) (%) J(kgf.m)(-29ºC)TGS-50 490(50) 580(59) 30 130 (13)TGS-70S 490(50) 570(58) 29 180 (18) Part Numbers: 1.6mm 2.4mmTGS-50 5kg pkt TGS-50/16 TGS-50/24TGS-70 5kg pkt TGS-70S/16 TGS-70S/24
tgs-70saWs er70s-2
For Tig welding on all grades of carbon steel, pipes, offshore drilling rigs and structural steel works. TGS-70S is a multiple deoxidised rod con-taining small amounts of zirconium, titanium and aluminium in addition to the manganese and silicon deoxidizers' characteristics of steel rod group. It produces superior quality welds with minimum porosity even over rust and mill scale. Available in 1.6mm & 2.4mm diameters.
KIsWel staInless steel tIg rodt-308laWs er308lApproved by BV, KR, DNV, CWB, TUV
308L Tig Rod is generally used for welding low carbon 18%Cr-8%Ni steels. Each rod coming individually stamped.
Typical chemical composition of Rod (%): C si mn Cr ni moT-308L 0.02 0.38 1.84 19.9 9.8T-309L 0.01 0.41 1.93 23.2 13.7T-316L 0.02 0.39 1.87 18.6 11.8 2.2 Typical mechanical properties of all-weld-metal (%):a.R t.s ei i.v n/mm2 (kgf/mm2) (%) J(kgf.m)T-308L 570(58) 44 0ºC:160(16) - 196ºC:80(8)T-309L 590(60) 42 0ºC:110(11)T-316L 570(58) 40 0ºC:140(11) - 196ºC:50(5)
Part Numbers: 1.6mm 2.4mm 3.2mmT-308L 5kg pkt 308LF/16 308LF/24T-309L 5kg pkt 309LF/16 309LF/24T-316L 5kg pkt 316LF/16 316LF/24 316LF/32
t-309l aWs er309lApproved by BV, KR, DNV, CWB
The 309L Tig rod is used for welding similar al-loys in wrought or cast forms. Joining type 304 to carbon steel, welding the clad side of type 304 class steels. Each Tig rod is individually stamped.
t-316l aWs er316l Approved byABS, BV, KR, DNV, CWB, TUV
316L Tig Rod is typically used for welding of 18%Cr-12%Ni-Mo steels where corrosion resistant qualities are required. Each tig rod is individually stamped.
39
tIg & gas FIller WIres
www.migomag.com.au
SECTION 8
KoBe staInless steelFlux cored rodtgX-308l tgX-316laWs a5.22 r308ltI-5 aWs a5.22 r309ltI-5
tgX-309l tgX-347aWs a5.22 r316ltI-5 aWs a5.22 r347ltI-5
For root pass in one-sided TIG welding of stain-less steels. TGX series are flux cored filler rods for TIG welding without back shielding in the root pass. A slag is produced which protects the back side from oxidation. Weld costs of one-sided root pass so greatly decreased dueto purging no longer being required.
Part Numbers: 308 309 316 3472.2mm 5kg Pkt TGX308L TGX309L TGX316L TGX347L
aluMInIuMtIg rodMIgoMag 1100FaWs a5.10 r118899.5% pure aluminium alloy rod suitable for gas welding and Tig welding applications. Used for the joining of selected high purity 1XXX series aluminium sheets.
1100FSize: Packet: Part Number:1.6mm 5kg Pkt 1100F/162.4mm 5kg Pkt 1100F/243.2mm 5kg Pkt 1100F/324043FSize: Packet: Part Number:1.6mm 5kg Pkt 4043F/162.4mm 5kg Pkt 4043F/243.2mm 5kg Pkt 4043F/325356FSize: Packet: Part Number:1.6mm 5kg Pkt 5356F/162.4mm 5kg Pkt 5356F/243.2mm 5kg Pkt 5356F/32
MIgoMag 4043FaWs a5.10 r4043Aluminium - 5% silicon alloy rod suitable for gas welding and Tig welding applications.
MIgoMag 5356FaWs a5.10 r5356Aluminium - 5% rod suitable for gas welding and Tig welding applications. Produces intermediate deposit strength and good ductility and corrosion resistance for the welding of a wide range of 3XXX, 5XXX, 6XXX and 5XX aluminium alloys.
5www.migomag.com.au40
Mig Torches
ClassKEY:•=LightIndustrial•=Industrial•=HeavyIndustrialAllMIGMachinescomewith3meterMigtorch,flowregulator,gashoseandfittings,3meterearthleadsandclamps,plug,sparerollersandoperationalinstructions.
MIg torches Product guIdeProduct Page Part# Class Tosuit TorchEnd Sizes
Migomag Connection Available Machine
SECT
ION
9
OTCBLUE11TORCH180AMP 41 WT1800 • Migomag200c,205190&195 Euro,Tweco&Miller 3m&4m
OTCBLUE11TORCH200AMP 41 WT2000 • Migomag215,&230 Euro,Tweco&Miller 3m&4m
OTCBLUE11TORCH350AMP 42 WT3520 • Migomag260,315,350,&400 Euro,Tweco&Miller 3m&4m
OTCBLUE11TORCH500AMP 42 WT5000 • OTCXD&500,Migomag400 Euro 3m,4m&5m
BINZELMB15AKERGOHANDLE 43 0020449 • Migomag200c,205190&195 Euro 3m,4m&5m
BINZELMB24KDERGOHANDLE 43 0120103 • Migomag215,&230 Euro 3m,4m&5m
BINZELMB36KDERGOHANDLE 44 0140143 • Migomag260,315,350,&400, Euro 3m,4m&5m OTCXD400&500
41
MIg torches
www.migomag.com.au
SECTION 9
• Rated at 180 Amps, at a 40% duty cycle • Superior ergonomic handle for easy operation • Spring cable support for smooth wire feeding • Durable metal connection system • The OTC torch has many optional parts for various applications
otc Blue II Mig torch 1800Blue II otc torch 180 amp - co2/Mag
WT1800
The New OTC Blue II Range
The new OTC Blue II range of Mig torches comes with a superior ergonomic handle for ease of opera-tion. Spring cable support for smooth wire feeding. Durable metal connection system and many optional parts for various applications.
• Rated at 200 Amps, at a 80% duty cycle • Comes with a 3 or 4 meter lead • Superior ergonomic handle for easy operation • Spring cable support for smooth wire feeding • Durable metal connection system • The OTC torch has many optional parts for various applications
otc Blue II Mig torch 2000Blue II otc torch 200 amp - co2/Mag
WT2000
wt1800Figure description Part nr1 Nozzle U4186L003 Contact Tip (A Tip - CuCrZr) K980C236 Torch body with O-ring U5020C006-1 O-ring (S9) 3574-0017 Cap U5341G018 Flat Pin (4-16) 3361-2079 Handle (with screw M4x18 : 4pc) U5030G0010 Trigger U5030E0111 Spring U2853C0412 Micro Switch (with cover) U4167T0013 Cable Support (with screw M4x16 : 4pc) U5035K0014 Liner 3m U4353G0115 Power Cable (with screw M5x14) 3m U5341D00
wt2000Figure description Part nr1 Nozzle U5342N003 Contact Tip (A Tip - CuCrZr) K980C246 Torch body with O-ring U5020C006-1 O-ring (S9) 3574-0017 Cap U5341G018 Flat Pin (4-16) 3361-2079 Handle (with screw M4x18 : 4pc) U5030G0010 Trigger U5030E0111 Spring U2853C0412 Micro Switch (with cover) U4167T0013 Cable Support (with screw M4x16 : 4pc) U5035K0014 Liner 3m U4186G0115 Power Cable (with screw M5x14) 3m U5342D00
5www.migomag.com.au42
Binzel Mig TorchesSE
CTIO
N 9
• Rated at 350 Amps, at a 80% duty cycle • Comes with a 3 or 4 meter lead • Superior ergonomic handle for easy operation • Spring cable support for smooth wire feeding • Durable metal connection system • The OTC torch has many optional parts for various applications
otc Blue II Mig torch 3510Blue II otc torch 350 amp - co2/Mag
• Rated at 500 Amps, at a 80% duty cycle
• Comes with a 3 or 4 meter lead • Superior ergonomic handle for easy operation • Spring cable support for smooth wire feeding • Durable metal connection system • The OTC torch has many optional parts for various applications
otc Blue II Mig torch 5000Blue II otc torch 500 amp - co2/Mag
WT3510
WT5000
wt3510Figure description Part nr1 Nozzle U4167G012 Insulator U4167L003 Contact Tip (A Tip - CuCrZr) K980C264 Tip body U4167G035 Orifice U4167G026 Torch body with O-ring U5347B006-1 O-ring (S9) 3574-0017 Cap U5341G018 Flat Pin (4-16) U5035G039 Handle (with screw M4x20 : 2pc/M4x16 : 2pc) U5035G0010 Trigger U5035E0111 Spring U157E0412 Micro Switch (dust proof type) 4254-13713 Cable Support (with screw M4x16 : 4pc) U5035K0014 Liner 3m U4170H0214 Liner 4m U4535G0114 Liner 6m U4172H0115 Power Cable (with screw M5x14) 3m U5347D0015 Power Cable (with screw M5x14) 4m U5348D0015 Power Cable (with screw M5x14) 6m U5349D00
wt5000Figure description Part nr1 Nozzle U4173G012 Insulator U4173L003 Contact Tip (A Tip - CuCrZr) K980C744 Tip body U4173G215 Orifice U4173G026 Torch body with O-ring U5353B006-1 O-ring (S9) 3574-0017 Cap U5341G018 Flat Pin (4-16) U5035G039 Handle (with screw M4x20 : 2pc/M4x16 : 2pc) U5035G0010 Trigger U5035E0111 Spring U157E0412 Micro Switch (dust proof type) 4254-13713 Cable Support (with screw M4x16 : 4pc) U5035K0014 Liner 3m U4173G0414 Liner 4m U4537G0114 Liner 6m U4175G0415 Power Cable (with screw M5x14) 3m U5353D0015 Power Cable (with screw M5x14) 4m U5354D0015 Power Cable (with screw M5x14) 6m U5355D00
43
MIg torches
www.migomag.com.au
SECTION 9Binzell Mig Torches
BInZel MB15aK ergo handleMIg/Mag Welding torch MB15aK air cooled
MB15AK
MB24KD
BInZel MB24Kd ergo handleMIg/Mag Welding torch MB24Kd air cooled
Figure description Part nr1 Swan Neck 50º Bent P00200092 Gas Nozzle holder 00200783 Head Insulator 10pcs 00200504 Nozzle Spring 20pcs 00200586 Torch body, brass 400001147 Torch body, plastic 400004410 Ergonomic handle, cpl with trigger 1800007618 Trigger 2 pol 185003140 Bicox power cable 3m 16006540 Bicox power cable 4m 16007840 Bicox power cable 5m 160009190 Tip M6 0.6 140000890 Tip M6 0.8 140005990 Tip M6 1.0 140025390 Tip M6 0.9 Alum 141000590 Tip M61.0 Alum 1410007100 Gas nozzle, cyl ND 16 1450041103 Gas nozzle, cyl ND 12 1450075104 Gas nozzle, con Extended insulation ND 12 1450107106 Gas nozzle, Tap ND 9.5 1450123108 Spot weld, gas nozzle ND 16.0 1450185110 Spot weld, gas nozzle for stud welding ND 16.0 1450185
Figure description Part nr120 Insulated Liner 1.5/4.5 Blue 3m 1240011 with nipple for wire 0.6-0.8 4m 1240012120 Insulated Liner 2.0/4.5 Red 3m 1240026 with nipple for wire 4m 1240031 1.0-1.2 5m 1240035130 Teflon core liner 1.4/4.0 3m 1260005 red with collet & o-ring for wire 0.6-1.0 4m 1260008130 Teflon core liner 2.0/4.0 3m 1260021 red with collet & o-ring for wire 1.0-1.2 4m 1260026130 Alum wire feed Kit 1.0-1.2mm 3m P141K123200 Spanner 1910001
Figure description Part nr1 Swan Neck 50º Bent 012000110 Ergonomic handle, cpl with trigger 180007618 Trigger 2 pol 185003140 Bicox power cable 3m 160023940 Bicox power cable 4m 160025540 Bicox power cable 5m 160026770 Gas diffuser white 012018380 Tip holder 142000390 Tip M6 0.8 1450005190 Tip M6 1.0 140024290 Tip M6 1.2 140037990 Tip High Temp 1.0 140024590 Tip High Temp 1.2 140038290 Tip M6 1.0 Alum 141000690 Tip M6 1.2 Alum 141001090 Tip M6 1.0 Alum 1410007100 Gas nozzle, cyl ND 17 1450047102 Gas nozzle, cyl ND 12.5 1450080104 Gas nozzle, tap ND 10.0 1450128105 Spot weld, gas nozzle ND 17.0 1450174120 Insulated Liner 1.5/4.5 Blue 3m 1240012 with nipple for wire 0.6-0.8 4m 1240011
Figure description Part nr120 Insulated Liner 2.0/4.5 Red 3m 1240026 with nipple for wire 4m 1240031 1.0-1.2 5m 1240035130 Teflon core liner 1.5/4.0 3m 1260005 red with collet & o-ring for wire 0.6-1.0 4m 1260008130 Teflon core liner 2.0/4.0 3m 1260021 red with collet & o-ring for wire 1.0-1.2 4m 1260026130 Alum wire feed Kit 1.0-1.2mm 3m P141K123200 Spanner 1910001
5www.migomag.com.au44
Binzel Mig TorchesSE
CTIO
N 9
BInZel MB36Kd ergo handleMIg/Mag Welding torch MB36Kd air cooled
BInZel Push-Pull Welding torchPush Pull Welding torch PP24d/26d/36d
Figure description Part nr1.1 Swan Neck 50º Bent 014000610 Ergonomic handle, cpl with trigger 180007618 Trigger 2 pol 185003140 Bicox power cable 3m 160036440 Bicox power cable 4m 160037940 Bicox power cable 5m 160039144 Trigger wire connector 175002245 Insulator sleeve 400011954 Cable support spring 500034371 Gas diffuser long life 014002671 Gas diffuser white 014026182 Tip holder M6 28mm (short) 142000583 Tip holder M6 32mm (long) 142001190 Tip M6 0.8 140005190 Tip M6 1.0 140024290 Tip M6 1.2 140037990 Tip M6 High temp 1.0 140024590 Tip M6 High temp 1.2 140038290 Tip M6 1.0 Alum 141000690 Tip M6 1.2 Alum 1410010104 Gas nozzle, cyl ND 19.0 1450045105 Gas nozzle, cyl ND 16.0 1450078106 Gas nozzle, Tap ND 12.0 1450126108 Spot weld, gas nozzle ND 20 1450172120 Insulated Liner 1.5/4.5 Blue 3m 1240011 with nipple for wire 0.6-0.8 4m 1240012120 Insulated Liner 2.0/4.5 Red 3m 1240026 with nipple for wire 4m 1240031 1.0-1.2 5m 1240035130 Teflon core liner 1.4/4.0 3m 1260005 red with collet & o-ring for wire 0.6-1.0 4m 1260008
Figure description Part nr130 Teflon core liner 2.0/4.0 3m 1260021 red with collet & o-ring for wire 1.0-1.2 4m 1260026130 Alum wire feed Kit 1.0-1.2mm 3m P141K123200 Spanner 1910001
type version motor Cable Length Part numberPP26D Straight 42V 8m 0180033 45º bent 42V 8m 0180035PP36D Straight 42V 8m 0830014 45º bent 42V 8m 0830017
45
tIg, tungstens & sPare Parts
www.migomag.com.au
SECTION 10
tIg torch with hand valve9 – 17 – 26 series• Modular construction• Slim, light and flexible cable assemblies• Most common hand held torches available• SR9V 4m cable BSB 1025 7051415• SR17V 4m cable BSB 1025 7051453• SR26V 4m cable BSB 3550 7051572
Figure description Part nr1.21 Back cap (long) 41V241.22 Back cap (short) 41V331.23 Back cap (medium) 41V351.24 O-ring 16500281.31 Collet 25.4mm long for electrode 1.0mm 13N211.31 Collet 25.4mm long for electrode 1.6mm 13N221.31 Collet 25.4mm long for electrode 2.4mm 13N231.41 Collet body for electrode 0.5-1.0mm 13N261.41 Collet body for electrode 1.6mm 13N271.41 Collet body for electrode 2.4mm 13N281.51 Ceramic gas nozzle, no. 4 6.5mm 13N081.51 Ceramic gas nozzle, no. 5 8.0mm 13N091.51 Ceramic gas nozzle, no. 6 9.5mm 13N101.51 Ceramic gas nozzle, no. 7 11mm 13N111.51 Ceramic gas nozzle, no. 8 12.5mm 13N121.51 Ceramic gas nozzle, no. 10 16.0mm 13N131.7 Collet body with gas lens for elect 0.5-1.0mm 45V421.7 Collet body with gas lens for elect 1.6mm 45V431.7 Collet body with gas lens for elect 2.4mm 45V441.8 Ceramic gas nozzle, no. 4 6.5mm 53N581.8 Ceramic gas nozzle, no. 5 8.0mm 53N591.8 Ceramic gas nozzle, no. 6 9.5mm 53N601.8 Ceramic gas nozzle, no. 7 11mm 53N61
9V TORCH
Technical Data (EN 50 078)SRT 9V / SRT 17V / FXV / SRT 26VType of cooling: AirGas Flow: 5-12l/7-15l/7-18l minInert Gas: DIN EN 439Rated at 35% Duty Cycle: 110/140/180 A DC 95/125/130 A DCElectrode dia: 0.5-1.6/0.5-2.4/0.5-4.0mm
tIg torch accessorY KItsaK-1suit 9V tig torch
Includes:• 1 long backcap• 2 collet bodies (1.0 & 1.6mm)• 2 collets (1.0 & 1.6mm)• 3 alumina nozzles (#4, #5, #6)• 2 x 2% Thoriated tungsten electrodes (1.0 & 1.6mm)
aK-2suit 17, 18 & 26 series tig torches
Includes:• 1 short backcap• 3 collet bodies (1.0, 1.6 & 2.4mm)• 3 collets (1.0, 1.6 & 2.4mm)• 3 alumina nozzles (#4, #5, #6)• 3 x 2% Thoriated tungsten electrodes (1.0, 1.6 & 2.4mm)
5www.migomag.com.au46
SECT
ION
10Tungstens
2% thorIatedred end tipFor dc currentThese are electrode negative tungstens for welding mild and stainless steel.
Specifications:Size (mm): Part Number:1.0 70000701.6 70000802.4 70000903.2 70000994.0 7000102
WItstar Ws2torquise end tipFor dc Welding
Specifications:Size (mm): Part Number:1.6 70001962.4 70001983.2 7000200
8% ZIrconIated White end tipFor ac currentFor AC current welding of non ferrous materials, including aluminium and magnesium alloys.
Specifications:Size (mm): Part Number:1.6 70000302.4 70000343.2 70000364.9 7000037
2% cerIated grey end tipFor ac or dc Welding
Specifications:Size (mm): Part Number:1.6 70001672.4 70001693.2 7000170
47
tIg torch
www.migomag.com.au
SECTION 10
tIg torch with trigger switch9 – 17 – 26 series• Modular construction• Slim, light and flexible cable assemblies• Most common hand held torches available• SR9V 4m cable BSB 1025 7051415• SR17V 4m cable BSB 1025 7051453• SR26V 4m cable BSB 3550 7051572
Figure description Part nr1.21 Back cap (long) 41V241.22 Back cap (short) 41V331.24 O-ring 16500121.31 Collet 50.0mm long for electrode 1.0mm 10N221.31 Collet 50.0mm long for electrode 1.6mm 10N231.31 Collet 50.0mm long for electrode 2.4mm 10N241.31 Collet 50.0mm long for electrode 3.2mm 10N251.31 Collet 50.0mm long for electrode 4.0mm 54N201.32 Collet 50.0mm long for electrode 1.0mm 10N22D1.32 Collet 50.0mm long for electrode 1.6mm 10N23D1.32 Collet 50.0mm long for electrode 2.4mm 10N24D1.32 Collet 50.0mm long for electrode 3.2mm 10N25D1.32 Collet 50.0mm long for electrode 4.0mm 54N20D1.40 Collet body for electrode 1.6mm 10N311.40 Collet body for electrode 2.4mm 10N321.40 Collet body for electrode 3.2mm 10N281.40 Collet body for electrode 4.0mm 4064881.51 Ceramic gas nozzle, no. 4 6.5mm 10N501.51 Ceramic gas nozzle, no. 5 8.0mm 10N491.51 Ceramic gas nozzle, no. 6 9.5mm 10N481.51 Ceramic gas nozzle, no. 7 11mm 10N471.51 Ceramic gas nozzle, no. 8 12.5mm 10N461.51 Ceramic gas nozzle, no. 10 16.0mm 10N451.52 Ceramic gas nozzle, no. 5 8.0mm 10N49L1.52 Ceramic gas nozzle, no. 6 9.5mm 10N48L1.52 Ceramic gas nozzle, no. 7 11mm 10N47L1.53 Ceramic gas nozzle with metal shield, no. 5 8.0mm 10N551.53 Ceramic gas nozzle with metal shield, no. 6 9.5mm 10N541.53 Ceramic gas nozzle with metal shield, no. 7 11mm 10N531.53 Ceramic gas nozzle with metal shield, no. 8 12.5mm 10N521.53 Ceramic gas nozzle with metal shield, no. 10 16mm 10N51 Ceramic spot weld nozz with metal shield, no. 8 12.5mm 10N52P1.61 Insulator (alternative for pos 1.71) 54N011.62 Insulator (alternative for os 1.72) 54N631.71 Collet body with gas lens for elect 0.5-1.0mm 45V241.71 Collet body with gas lens for elect 1.6mm 45V251.71 Collet body with gas lens for elect 2.0-2.4mm 45V261.71 Collet body with gas lens for elect 3.2mm 45V271.71 Collet body with gas lens for elect 4.0mm 45V281.72 Collet body with gas lens for elect 1.6mm 45V1161.72 Collet body with gas lens for elect 2.4mm 45V641.72 Collet body with gas lens for elect 3.2mm 9957951.72 Collet body with gas lens for elect 4.0mm 45V631.81 Ceramic gas nozzle, no. 4 6.5mm 54N181.81 Ceramic gas nozzle, no. 5 8.0mm 54N171.81 Ceramic gas nozzle, no. 6 9.5mm 54N161.81 Ceramic gas nozzle, no. 7 11mm 54N151.81 Ceramic gas nozzle, no. 8 12.5mm 54N141.81 Ceramic gas nozzle, no. 12 19.5mm 54N191.82 Ceramic gas nozzle, no. 5 8.0mm 54N17L1.82 Ceramic gas nozzle, no. 6 9.5mm 54N16L1.81 Ceramic gas nozzle, no. 7 11mm 54N15L
Technical Data (EN 50 078)SRT 9V / SRT 17V / FXV / SRT 26VType of cooling: AirGas Flow: 5-12l/7-15l/7-18l minInert Gas: DIN EN 439Rated at 35% Duty Cycle: 110/140/180 A DC 95/125/130 A DCElectrode dia: 0.5-1.6/0.5-2.4/0.5-4.0mm
Figure description Part nr1.83 Ceramic gas nozzle, no. 6 9.5mm 57N751.83 Ceramic gas nozzle, no. 8 12.5mm 57N741.83 Ceramic gas nozzle, no. 10 16mm 53N881.83 Ceramic gas nozzle, no. 12 19.5mm 53N871.84 Ceramic gas nozzle, 24.0mm 53N892 Handle complete without BIS module 1800093
5www.migomag.com.au48
SECT
ION
11Gas & Cutting Equipment
GWKOA
MIgoMag oXYgen& acetYlene KItgWKoaComes complete with Flash back Arrestors in a sturdy case
Comes with:• 4 Flash back arrestors• Cutting tips• Oxy goggles• Circle cutting attachments• Cutting torch• Blowpipe• Cutting guide wheels
• 10 meters of Oxygen and Acetylene hose
• Oxygen regulator• Acetylene regulator• Welding tips• Heating tips• Mixer & Fling lighters
MIgoMag gas regulators
FloW Meter/regulatorMig & tigcZ101-327 - argon & Mixed gas
FloW Meter/regulatorMig & tig side entrycZ101-327s - argon & Mixed gas
oXYgen regulatororegMeets all Australian Standards
acetYlene regulatoraregMeets all Australian Standards
lPgregulatorlreg
CZ101-327
OREG AREG
49www.migomag.com.au
SECTION 11
gas hose setsIMPORTANT HOSE INFORMATION:• It is essential to use the correct hose for your application• Follow the correct colour coding• Oxygen - Blue• Acetylene - Red• LPG - Orange• As a general rule, when using the following it is essential to use
the larger 10mm diameter hose size with the appropriate fittings and Hi-flow Flashback arrestors
• Heating eqipment• Large gouging, welding and cutting tips• Hose lengths over 15m• When in doubt always check to make sure you are using the cor-
rect hose equipment• Hoses comply with Australian standards AS 1335-1995 and come
as a complete assembly
MIgoMag Flash BacK arrestorsall arrestors meet australian standards as 4603-1995, as 4839-2001Every unit is factory tested. Testing machinery to meet FBA annual test requirements
hIgh FloW regulator endFlasha-reFh• High flow fuel gas
Flasha-reoh• High flow oxygen
hIgh FloW torch endFlasha-teFM• High flow fuel gas
Flasha-teoM• High flow oxygen
standard FloW regulator endFlasha-reF• Standard flow fuel gas
Flasha-reo• Standard flow oxygen
standard FloW torch endFlasha-teF• Standard flow fuel gas
Flasha-teo• Standard flow oxygen
Gas & Cutting Equipment
MIgoMagBloW PIPeMBP
MIgoMag cuttIng attachMentMca
5www.migomag.com.au50
SECT
ION
11
description Part nr400 Amp Electrode Holder, quality red simple handle type MEHT400200 Amp Earth Clamp, comes with heavy copper strap MEC200500 Amp Earth Clamp, comes with heavy copper strap MEC500600 Amp G Brass Clamp, jaw opening up to 50mm MECG600
electrode holder and WorK claMPs
MEHT400 MECG600 MEC200
MEC500
Safety Products & Accessories
WeldIng JacKetsMIgoMag leather WeldIng JacKetsSoft collar and Kevlar stitched.
description Part nrMigomag leather jacket - Medium SLJMS/MMigomag leather jacket - Large SLJMS/LMigomag leather jacket - X Large SLJMS/XLMigomag leather jacket - XX Large SLJMS/XXLMigomag leather jacket - XXX Large SLJMS/XXXL
ProBane JacKet WIth leather sleeVes Incorporating safety colours to ensure jackets are easily seen.
description Part nrProbane jacket with leather sleeves - Small PJ100/SProbane jacket with leather sleeves - Medium PJ100/MProbane jacket with leather sleeves - Large PJ100/LProbane jacket with leather sleeves - X Large PJ100/XLProbane jacket with leather sleeves - XX Large PJ100/XXL
ProBane JacKet
description Part nrMigomage proban jacket safety colour - Small SNPWJ30SMigomage proban jacket safety colour - Medium SNPWJ30LMigomage proban jacket safety colour - Large SNPWJ30MMigomage proban jacket safety colour - X Large SNPWJ30XLMigomage proban jacket safety colour - XX Large SNPWJ30XXLMigomage proban jacket safety colour - XXX Large SNPWJ30XXXL
51
saFetY & accessorIes
www.migomag.com.au
SECTION 12
MIgoMag hI-tech helMet070M2s automatic Welding helmet
description Part nrCrimson Banshee Welding Helmet REDSKULLDark Fury Welding Helmet BLACKSKULLSkeletor Welding Helmet WHITESKULLCromeinaor Welding Helmet SILVERSKULL
WeldIng gloVes300/WgM100% Kevlar stitched quality long leather welding gloves
SKELETOR HELMET CROMEINATOR HELMET
Features:• Darkness reaction time: 0.05ms (1/20000 sec)• Viewing area 97mm x 47mm• Perfect colour restitution• Clear Shade 4• 2 Independent sensors• Lens sensitivity control• Variable delay from dark to clear state (from 0.1 to 1 sec)• Solar and Lithium battery• Optimal UV & IR protection• Weight: 463g• Lens Cover plate
description Part nrLens - Outside cover Hi-Tec 070420Lens - Inner Hi-Tec 070421Head Harness Hi-Tec 070425 HI-TEC HELMET
Auto Darkening Lens:• Sensitivity Control provides adjustment adapt-
ability under variable welding light• Tig capability• On/Auto off with reset function• Dark shade adjustment (9-13)• Delay from dark to clear shade (0.1 to 1 sec)Comfortable Head Gear:• Optimal comfort thanks to a fabric headband in
front and comfort cushion in the back of the head gear
• 3 position adjustment with proper depth of head• Viewing angle position• Distance between eyes and lens
HI-TEC HELMET ACCESSORIES
Safety Products & Accessories
www.migomag.com.au
Melbourne Geelong Canberra (03)93124999 (03)52770033 (02)62804883