®
CatalogueDomestic Range
Specialists in Stainless Steel Drainage Systems
3
General Index
Shower Channels
SKY Waterproofing Membrane
Stainless Steel Watertight Manhole Covers
Accessories
Kitchen Channels
Domestic, Medium Capacity and Vinyl Floor Drains
Fat Separator
5
SHOWER CHANNELS
73.40
BASIC siphonic shower channel in stainless steel
Ref. Length490070060 600
490070070 700
490070080 800
490070090 900
490070100 1000
Dimensions in mm
600/700/800/900/1000
25
98
70
Grating ref. 015(without aditional costs)
OptionalTrap ref. 360ST Ref. TELA
(2 x 1.5 m)
IncludesGrating ref. Reversible
(two finishes in only one grating)
Siphonic channel for shower made entirely of stainless steel AISI304. Incorporates a 360° super-flat trap made of ABS plastic with a 33 x 33 cm thermo-sealed sheet suitable for waterproofing and a hair-catcher strainer to facilitate cleaning. Includes 2 x 1.5 m SKY waterproofing membrane. Flow capacity: 0.9 l/s.
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
90o
Top piece of the trap with pre-marked fold to bend and adapt to wall-standing facilities
40
Ref. SCD5090º super-flat non-syphonic elbow
®
6
BASIC NOIR siphonic shower channel in stainless steel
Ref. Length490070060N 600
490070070N 700
490070080N 800
490070090N 900
490070100N 1000
Dimensions in mm
SHOWER CHANNELS
73.40
600/700/800/900/1000
25
98
70
grating
channel
trap
thermo-sealed sheet
Trap ref. 360ST Ref. TELA(2 x 1.5 m)
IncludesGrating ref. Reversible
(two finishes in only one grating)
Black finish The treatment that provides the black color is known as Physical Vapor Deposition (PVD). It is a coating method that consists of depositing thin films of different evaporated materials on the stainless steel surface of the channel. The coatings are ceramic, withstand high temperatures and good resistance to corrosion, impact and abrasion. They are also impermeable to ultraviolet degradation, do not fade and are very harsh in acidic, alkaline and salt bath environments, nor are they damaged by chemical and cleaning products. Dangerous by-products are not used so the PVD system is ecological and environmentally friendly.
Siphonic channel for shower made entirely of stainless steel AISI304. Incorporates a 360° super-flat trap made of ABS plastic with a 33 x 33 cm thermo-sealed sheet suitable for waterproofing and a hair-catcher strainer to facilitate cleaning. Includes 2 x 1.5 m SKY waterproofing membrane. Flow capacity: 0.9 l/s.
90o
Top piece of the trap with pre-marked fold to bend and adapt to wall-standing facilities
40
Ref. SCD5090º super-flat non-syphonic elbow
Optional
7
CLASIC siphonic shower channel in stainless steel
filter
Ref. Length397068060 600
397068070 700
397068080 800
Dimensions in mm
non-return valve
trap
6/6.7
600/700/800
11/18
98
68
thermo-sealed sheet
Grating ref. 015(without aditional costs)
OptionalTrap ref. 360ST
IncludesGrating ref. Lisa
Siphonic channel for shower made entirely of stainless steel AISI304. It incorporates a removable filter with non-return valve and a 360° super-flat trap made of ABS plastic with a 33 x 33 cm thermo-sealed sheet suitable for waterproofing and a hair-catcher for easy cleaning. Flow capacity: 0.9 l/s.
It is the lowest height syphonic channel in our range, specially designed for areas with height problems.
90o
40
Ref. SCD5090º super-flat non-syphonic elbow
grating
channel
Top piece of the trap with pre-marked fold to bend and adapt to wall-standing facilities
®
8
ELITE siphonic shower channel in stainless steel
Siphonic channel for shower made entirely of AISI304 stainless steel, with polypropylene body and fully removable trap. Incorporates polypropylene bowl Ø50 mm and flange to waterproof with SKY membrane, also included. The upper part is telescopic, the height can be easily adjusted to fit the final pavement from 90 to 145 mm thanks to pre-marked grooves that facilitate cutting. Flow capacity: 0.8 l/s. Water height: 40 mm.
72
67
600/700/800
30/85
Ref. Length399070060 600
399070070 700
399070080 800
Dimensions in mm
SHOWER CHANNELS
18
grating
channel
trap
bowl
connection sleeve
membrane SKY
Grating ref. 015(without aditional costs)
OptionalRef. TELA(2 x 1.5 m)
IncludesGrating ref. Lisa Ref. CALD 100 H
(horizontal bowl)Ref. CALD 101 V
(vertical bowl)Ref. MANGUITO
(connection sleeve)
flangeEPDM gasket
Ø50
9
PREMIUM siphonic shower channel in stainless steel
Siphonic channel for shower with built-in slope towards the drain point, made entirely of AISI304 stainless steel. Incorporates polypropylene bowl Ø50 mm and flange to waterproof with SKY membrane, also included. Flow capacity: 0.5 l/s. Water height: 25 mm.
600/700/800/900/1000
20
100 130
8
25
100
Ref. Length699100060 600
699100070 700
699100080 800
699100090 900
699100100 1000
Dimensions in mm
Grating ref. Lisa(under request)
Grating ref. Rellenable(under request)
Ref. TELA(de 2 x 1.5 m)
IncludesGrating ref. 015 Ref. CALD 100 H
(horizontal bowl)Ref. MANGUITO
(connection sleeve)
OptionalRef. CALD 101 V
(vertical bowl)
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
8
67Ø50
®
10
BASIC PLUS siphonic shower channel in stainless steel
Siphonic channel for shower made entirely of stainless steel AISI304. Incorporates removable trap WT75. Flow capacity: 0.5 l/s.
SHOWER CHANNELS
600/700/800/900/1000
25
Ø76
83
Ref. Length490090060 600
490090070 700
490090080 800
490090090 900
490090100 1000
Dimensions in mm
8389
20
OptionalTrap ref. WT75
Includes
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
Grating ref. Lisa(under request)
Grating ref. Rellenable(under request)Grating ref. 015
8
8
Ref. CALD 100 H(bowl to seal)
11
Ref. Length
ELG60 600
Other measures on request
680
600
8557
65
160
Ø40
98
Dimensions in mm
11
IncludesTrap ref. 360S
ELEGANCE siphonic shower channel in stainless steel
Siphonic channel for a work shower, concealed for installation behind the bathroom wall. Body and trim with a satin finish, both made of AISI304 stainless steel. It incorporates a 360° super-flat trap made of ABS plastic and suitable for waterproofing with membrane or paint and a hair-catcher strainer to facilitate cleaning. Flow capacity: 0.9 l/s.
internal part of the channel
trim
Ref. SCD5090º super-flat non-syphonic elbow
Optional
®
12
600/700/800/900/1000
DISEÑO siphonic shower channel in stainless steel
Ref. Length590080060 600
590080070 700
590080080 800
590080090 900
590080100 1000
Dimensions in mm
Siphonic channel for shower with built-in slope towards the drain point, made entirely of AISI304 stainless steel. It incorporates a 360° super-flat trap made of ABS plastic with thermo-sealed sheet suitable for waterproofing and a hair-catcher strainer to facilitate cleaning. Includes SKY waterproofing membrane. Flow capacity: 0.9 l/s.
SHOWER CHANNELS
815115
15
21.5 26.572
Grating ref. Lisa Grating ref. Rellenable(under request)
OptionalTrap ref. 360ST Ref. TELA
(2 x 1.5 m)
Includes
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
90o
Ø40
Ref. SCD5090º super-flat non-syphonic elbow
Top piece of the trap with pre-marked fold to bend and adapt to wall-standing facilities
®
14
VINYL SHOWER CHANNELS
BASIC vinyl siphonic shower channel in stainless steel
Siphonic channel for shower made entirely of stainless steel AISI304 and specially designed for vinyl flooring. It is manufactured with a screwed tray that acts as a gripper tray for the vinyl, fixing it much more firmly than if it were a perimeter flange. The fixing screws are hidden inside, making it more hygienic since it is not exposed to the passage of people and/or machines and, of course, much more aesthetic. Location of the exit to be determined. It incorporates a 360° super-flat trap made of ABS plastic with a hair-catcher strainer to facilitate cleaning. It is made on request. Deadline to be specified. Flow capacity: 0.9 l/s.
length as desired
70118
length + 102.898
screws
Available gratingsRef. Lisa Ref. Rellenable Ref. LineTrap ref. 360S
Includes
grating
clamp tray
channel
trap
30.373.10
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
Ref. SCD5090º super-flat non-syphonic elbow
Optional
Ref. 480070XXX
40
Grating ref. 015
15
Available gratings
BASIC PLUS vinyl siphonic shower channel in stainless steel
Siphonic channel for shower made entirely of stainless steel AISI304 and specially designed for vinyl flooring. It is manufactured with a screwed tray that acts as a clamping flange for the vinyl, fixing it much more firmly than if it were a perimeter flange. The fixing screws are hidden inside, making it more hygienic since it is not exposed to the passage of people and/or machines and, of course, much more aesthetic. Location of the exit to be determined. Incorporates removable trap WT75. It is made on request. Deadline to be specified. Flow capacity: 0.5 l/s.
length as desired
90138
20
100200
80
Ø76
20
27
130.3
length + 102.8
Ref. Lisa Ref. Rellenable Ref. 015Trap ref. WT75
Includes
Ø76
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
130.330.3
Ref. 480090XXX
Ref. CALD 100 H(bowl to seal)
OptionalGrating ref. Line
17
DOMESTIC DRAINS
KIT ECONOMIC for shower tray with stainless steel grating
Ref. Dimensions cm Outlet
800100H 10x10 Horizontal
800100V 10x10 Vertical
800150H 15x15 Horizontal
800150V 15x15 Vertical
Kit for shower tray composed of a frame, perforated grating with an original design and screws made of AISI304 stainless steel. The siphonic body made of polypropylene is completely removable and incorporates a non-return valve, bowl with clamping flange for the SKY waterproofing membrane of 2 x 1.5 m, also included and PVC connection sleeve. The cylindrical upper part can be easily cut to adjust the height to the final pavement, according to the needs of the installation. Flow capacity: 0.5 l/s.
stainless steel frame
non-return valve
bowl
stainless steel grating 15x15
stainless steel grating 10x10
membrane SKY
anti-odor cover
connection sleeve
150
80
Ø50
20/80
67
100
80
Ø50
20/80
67
100
Ø50
20/80
20/80
150
Ø50
10560
10560
Ref. 800100H
Ref. 800100V
Ref. 800150H
Ref. 800150V
screws
flange
EPDM gasket
trap
Ref. TELA(2 x 1.5 m)
IncludesBowl
(horizontal or vertical)Ref. MANGUITO
(connection sleeve)
®
18
®
KIT ECONOMIC NOIR for shower tray with stainless steel grating
Ref. Dimensions cm Outlet
800100HN 10x10 Horizontal
800100VN 10x10 Vertical
800150HN 15x15 Horizontal
800150VN 15x15 Vertical
Ref. 800100HN
Ref. 800100VN
Ref. 800150HN
Ref. 800150VN
DOMESTIC DRAINS
stainless steel frame
non-return valve
bowl
blackstainless steel
grating
membrane SKY
anti-odor cover
connection sleeve
screws
flange
EPDM gasket
Kit for shower tray composed of frame, slotted grating and screws made of AISI304 stainless steel. The siphonic body made of polypropylene is completely removable and incorporates a non-return valve, bowl with clamping flange for the SKY waterproofing membrane of 2 x 1.5 m, also included and PVC connection sleeve. The cylindrical upper part can be easily cut to adjust the height to the final pavement, according to the needs of the installation. Flow capacity: 0.5 l/s.
150
80
Ø50
20/80
67
100
80
Ø50
20/80
67
100
Ø50
20/80
20/80
150
Ø50
10560
10560
trap
Ref. TELA(2 x 1.5 m)
IncludesBowl
(horizontal or vertical)Ref. MANGUITO
(connection sleeve)
19
ECONOMIC NOIR siphonic drains
Fully removable siphonic body drains made of polypropylene. Includes a non-return valve and anti-odor cover. The frame and the slotted grating are made of AISI304 stainless steel and are finished in black. Flow capacity: 0.5 l/s.
stainless steel frame
non-return valve
bottom
stainless steel grating
anti-odor cover
Ø50
88
150
47
Ø50
90
150
65
90
Ø5065
100
100
88
Ø50
47
Ref. Dimensions cm Outlet Units/box
TB101N 10x10 Vertical 12
TB102N 10x10 Horizontal 12
TB151N 15x15 Vertical 12
TB152N 15x15 Horizontal 12
connection sleeve
Ref. TB101N
Ref. TB102N
Ref. TB152N
Ref. TB151N
Black finish The treatment that provides the black color is known as Physical Vapor Deposition (PVD). It is a coating method that consists of depositing thin films of different evaporated materials on the stainless steel surface of the drain. The coatings are ceramic, withstand high temperatures and good resistance to corrosion, impact and abrasion. They are also impermeable to ultraviolet degradation, do not fade and are very harsh in acidic, alkaline and salt bath environments, nor are they damaged by chemical and cleaning products. Dangerous by-products are not used so the PVD system is ecological and environmentally friendly.
trap
IncludesRef. MANGUITO
(connection sleeve)
20
® DOMESTIC DRAINS
ECONOMIC siphonic drains
Fully removable siphonic body drains made of polypropylene. It incorporates a non-return valve and an anti-odor cover. The frame and the perforated grating are made of AISI304 stainless steel and have a satin finish. Flow capacity: 0.5 l/s.
stainless steel frame
non-return valve
bottom
anti-odor cover
Ref. Dimensions cm Outlet Units/box
TB101 10x10 Vertical 12
TB102 10x10 Horizontal 12
TB151 15x15 Vertical 12
TB152 15x15 Horizontal 12
connection sleeve
Ref. TB102
Ref. TB101
Ref. TB151
Ref. TB152
20
Ø50
88
150
47
Ø50
90
150
65
90
Ø5065
100
100
88
Ø50
47
trap
IncludesRef. MANGUITO
(connection sleeve)
stainless steel grating 15x15
stainless steel grating 10x10
21
Ref. CD20A
Ref. CLL15 / CLL20
Ref. Dimensions cm GratingCD20A 20x20 Plate
CLL15 15x15 Refillable
CLL20 20x20 Refillable
DISEÑO ECONOMIC siphonic drains
plate gratingrefillable grating
Square siphonic drains with plate and refillable gratings, both made of AISI304 stainless steel. The body
trap is made of polypropylene and totally removable, incorporates a non-return valve, bowl with flange for SKY waterproofing membrane
2 x 1.5 m, also included and PVC connection sleeve. The cylindrical upper part can be easily cut to adjust the height to the final pavement, according to the needs of
the installation. Flow capacity: 0.8 l/s.
anti-odor cover
non-return valve
connection sleeve
bowl
membrane SKY
100
200
20105.4
100
150/200
20105.4
OptionalRef. TELA(2 x 1.5 m)
IncludesRef. CALD 100 H(horizontal bowl)
Ref. CALD 101 V(vetical bowl)
Ref. MANGUITO(connection sleeve)
flange
EPDM gasket
trap
stainless steel frame
50
5067
67
22
®
Ref. Dimensions cmTR22A 20 x 20 x 28.75
DISEÑO ECONOMIC triangular siphonic drain
Triangular siphonic drain with plate grating made of AISI304 stainless steel, specially designed for corners. Fully removable polypropylene body
and trap. It incorporates polypropylene bowl and flange to waterproof with SKY membrane, also included. The upper part is telescopic, that is, the height can be
easily graduated to adjust it to the final pavement from 90 to 145 mm thanks to the pre-marked grooves that facilitate cutting. Flow capacity: 0.8 l/s.
Ref. Dimensions cm Units/box
SB201 11.5x11.5 12
115
10094
89
Ø50
Ø40
ECONOMIC mixed siphonic drain
Square siphonic drain with gloss polished finish grating made of AISI304 stainless steel with central part in circular shape removable for easy cleaning. Body trap in PVC. The outlet can be both horizontal and vertical incorporating a cover to close the unwanted outlet. It also incorporates a reducing piece. Flow capacity: 0.5 l/s.
Ø50Reducing
pieceCover
connection sleeve
plate grating
DOMESTIC DRAINS
bowl
membrane SKY
stainless steel frame
OptionalRef. TELA(2 x 1.5 m)
IncludesRef. CALD 100 H(horizontal bowl)
Ref. CALD 101 V(vertical bowl)
Ref. MANGUITO(connection sleeve)
20
146
200
287.50
100
80.5
flange
EPDM gasket
trap
5067
23
Ref. 510200 Ref. 510201
100
Ø50Ø80
100
73 Ø50
Ø80
68
150
Ø50Ø80
68
150
73 Ø50
Ø80
200
Ø75Ø160
105
200
105 Ø75
Ø160
DISEÑO ECONOMIC siphonic drains with mirror polished stainless steel
Ref. Dimensions cm Outlet510100 10x10 Vertical
510101 10x10 Horizontal
510150 15x15 Vertical
510151 15x15 Horizontal
Ref. Dimensions cm Outlet510200 20x20 Vertical
510201 20x20 Horizontal
Square drains made entirely of AISI304 stainless steel, with a mirror polished finish. It incorporates an integrated trap and a perforated grating. Available in horizontal and vertical outlets. Flow capacity: 0.7 l/s.
Ref. 510100 Ref. 510101 Ref. 510150 Ref. 510151
DISEÑO ECONOMIC siphonic drains with mirror polished stainless steel
Square drains made entirely of AISI304 stainless steel, with a mirror polished finish. It incorporates an integrated trap and a perforated grating with the central part in a round and removable shape to facilitate cleaning. Available in various sizes and horizontal and vertical outlets. Flow capacity: 0.5 l/s.
IncludesRef. MANGUITO
(connection sleeve)
24
®
Grey Glass
Ref. Description Dimensions cm500001 Drain without trap in white glass finish 11x11
500002 Drain without trap in grey glass finish 11x11
500003 Drain without trap and plate grating in stainless steel finish 11x11
500004 Drain without trap and perforated grating in stainless steel finish 11x11
DISEÑO ECONOMIC drains
White Glass
Plate Stainless Steel Perforated Stainless Steel
110
110
68Ø50
110
110
55
Square drains with frame and grating made of AISI304 stainless steel, with different finishes: white glass, gray glass, plate stainless
steel grating or perforated stainless steel grating. They incorporate a removable filter and non-return valve.
DOMESTIC DRAINS
Ref. Description Dimensions cm500001sif Drain in white glass finish 11x11
500002sif Drain in grey glass finish 11x11
500003sif Drain and plate grating in stainless steel finish 11x11
500004sif Drain and perforated grating in stainless steel finish 11x11
Available finishes
40
25
BASIC siphonic drains in stainless steel
Ref. Dimensions cm Flow l/s Units/box082100040 10x10 0.4-0.5 20
082150040 15x15 0.4-0.5 10
Ref. Description Dimensions cm Flow l/s083100040 Round stainless siphonic drain Ø10 0.34
Ref. 082100040
100
56
30
Ø40Ø85
Ref. 082150040
Ø90100
50
28
Ø40Ø86
Ref. 083100040
Square siphonic drain made of AISI304 stainless steel with mirror polished finish grating. The central part in a round and
removable shape for easy cleaning. Available in various sizes.
Siphonic drain with round body and plate grating in a polished finish and made entirely of AISI304 stainless steel.
Ø127150
35
70
Ø40Ø120
26
® DOMESTIC DRAINS
PREMIUM 084 siphonic drains in stainless steel
Ref. 084100040
Ref. 084150050 Ref. 084200050T
Ref. Description Dimensions cm Flow l/s Units/box
084100040 Drain 10x10 0.5 12
084100040T Drain with screw 10x10 0.5 12
084150050 Drain 15x15 0.7 8
084150050T Drain with screw 15x15 0.7 8
084200050T Drain with screw 20x20 0.7 8
100
42.50
33
Ø50Ø4025
4873
Ø5025
23
150
52.50
4873
200
52.50
4873
23
25Ø50
Siphonic drains with body and grating made of stainless steel AISI304. It incorporates an integrated trap and a mixed horizontal and vertical outlet pipe in ABS. This mixed outlet is very versatile since it allows mounting the drain according to the type of outlet (V/H) and the diameter (Ø40/50 mm) to adapt it to the installation needs.
Ref. 084100040T
Ref. 084150050T
Four possible connectionsvertical outlet
Ø50 mmhorizontal outlet
Ø40 mm Ø50 mm Ø40 mm
Two possible connectionsvertical outlet
Ø50 mmhorizontal outlet
Ø50 mm
27
150
Ø76
70
21
91,5
Non-siphonicRef. Dimensions cm
086100075 10x10
086150075 15x15
086150110 15x15
086200110 20x20
PREMIUM 086 siphonic drains in stainless steel
Vertical outlet drains with body and grating made of AISI304 stainless steel, in various sizes and outlet diameters.
There is the option of converting it into siphonic, incorporating a removable trap adapted to the different available diameters. It is an
ideal drain for installation in concrete or tiled floors, especially for terraces. The perforated grating with 8x8 mm square holes is “bare feet” and it is also
possible to choose a plate grating and a refillable grating.
Ref. WT75
100
Ø76
70
21
91,5
150
Ø110
70
21
91,5
200
Ø110
70
21
91,5
Ref. WT110
Technical data traps
22
3557
68102
92.96
14
6579
Ref. 086100075 Ref. 086150075 Ref. 086150110 Ref. 086200110
SiphonicRef. Dimensions cm Flow l/s
086100075WT 10x10 0.5
086150075WT 15x15 0.5
086150110WT 15x15 1.7
086200110WT 20x20 1.7
Optional gratings (on request)Ref. Lisa Ref. Rellenable
28
®
Ref. Description Dimensions cm082150050 Siphonic stainless drain with vertical outlet Ø50 mm 15x15
082150050C Siphonic stainless drain with vertical outlet Ø50 mm (with filter basket) 15x15
082200063 Siphonic stainless drain with vertical outlet Ø63 mm 20x20
082200063T Siphonic stainless drain with vertical outlet Ø63 mm (with screw) 20x20
082200063C Siphonic stainless drain with vertical outlet Ø63 mm (with filter basket) 20x20
082250080C Siphonic stainless drain with vertical outlet Ø80 mm (with filter basket) 25x25
082300110C Siphonic stainless drain with vertical outlet Ø110 mm (with filter basket) 30x30
Ref. 082250080C
Ref. 082150050C Ref. 082200063C
Ref. 082300110C
SEMI-INDUSTRIAL siphonic drains in stainless steel
150
35 80
50
Ø50Ø110
200
50 80
50
Ø63.5Ø150
250
50 115
50
Ø80Ø195
300
60 126
50
Ø110Ø220
The semi-industrial siphonic drains are made of AISI304 and AISI316L stainless steel (on request) and designed for installation both in indoor and outdoor areas where a specific evacuation flow is required and that support heavy loads. Thanks to their great resistance, they are ideal for parking lots, terraces, shopping areas...
DOMESTIC DRAINS
29
Ref. Description Dimensions cm082150050H Siphonic stainless drain with horizontal outlet Ø50 mm 15x15
082150050CH Siphonic stainless drain with horizontal outlet Ø50 mm (with filter basket) 15x15
082200063H Siphonic stainless drain with horizontal outlet Ø63 mm 20x20
082200063CH Siphonic stainless drain with horizontal outlet Ø63 mm (with filter basket) 20x20
082250080CH Siphonic stainless drain with horizontal outlet Ø80 mm (with filter basket) 25x25
082300110CH Siphonic stainless drain with horizontal outlet Ø110 mm (with filter basket) 30x30
Ref. 082250080CH
Ref. 082150050CH Ref. 082200063CH
Ref. 082300110CH
150
35135
Ø50
Ø110
200
50150
Ø63.5
Ø150
250
17525
Ø80
Ø195
300
60240
Ø110
Ø220
30
® MEDIUM CAPACITY DRAINS
DISEÑO siphonic drains in stainless steel (with removable trap)
Ref. Description Dimensions cmCAI 150 MC VA 050 K3 Drain with vertical outlet Ø50 mm 15x15
CAI 150 MC VA 075 K3 Drain with vertical outlet Ø75 mm 15x15
CAI 150 MC VA 110 K3 Drain with vertical outlet Ø110 mm 15x15
Ref. CAI 150 MC VA 050 K3
Ref. CAI 150 MC VA 075 K3
Ref. CAI 150 MC VA 110 K3
grating fixing screws
pedestrian grating
trap
anchoring tab
strainer
210 5
25
132.50
11.50
60
Ø50
210 5
25
132.50
11.50
60
Ø75
210 5
144
Ø110
The medium capacity siphonic drains are made of AISI304 and AISI316L stainless steel (on request)
and designed for different types of pavements or coverings such as tiling, continuous floors, epoxy
resin... They incorporate both removable trap and strainer. There is a wide range of gratings to meet any requirement,
round and square, screwed or not... As for the possibility of drains with variable height, within this same range, we find
telescopic drains, which with their two rounded bodies and the screwed clamping flange allows height adjustment and facilitates waterproofing.
In general, thanks to their multiple features and easy cleaning, they are ideal for changing rooms and showers, nursing homes, shopping centers...
Flow capacity: 1.7 l/s.
31
DISEÑO round drain with vertical outlet in stainless steel (with removable trap)
Ref. Description Dimensions cmCAI 160R MC VA 110 K3 Round drain with vertical outlet Ø110 mm Ø16
Ø160
5
Ø110
145
Ref. Description Dimensions cmCAI 150 MC HA 050 K3 Drain with horizontal outlet Ø50 mm 15x15
CAI 150 MC HA 075 K3 Drain with horizontal outlet Ø75 mm 15x15
CAI 150 MC HA 110 K3 Drain with horizontal outlet Ø110 mm 15x15
Ref. CAI 150 MC HA 050 K3
Ref. CAI 150 MC HA 075 K3
Ref. CAI 150 MC HA 110 K3
pedestrian grating
trap
anchoring tab
strainer
210
Ø110
165
170
1.50
2
10
132.50
Ø110
128
60
Ø50
2
10
132.50
Ø110
128
60
Ø75
grating fixing screws
32
®
Ref. CAI 150 MC VA2 050 K3
MEDIUM CAPACITY DRAINS
DISEÑO telescopic siphonic drains in stainless steel (with removable trap)
Ref. CAI 150 MC VA2 110 K3
Ref. CAI 150 MC VA2 075 K3
Ref. Description Dimensions cmCAI 150 MC VA2 050 K3 Drain with vertical outlet Ø50 mm 15x15
CAI 150 MC VA2 075 K3 Drain with vertical outlet Ø75 mm 15x15
CAI 150 MC VA2 110 K3 Drain with vertical outlet Ø110 mm 15x15
Ø137
150
130
65-105
60
Ø50
Ø137
150
130
65-105
60
Ø75
Ø137
150
130
65-105
60
Ø110
trap
leveling legs and anchoring tab
strainer
gasket
flange
lower part vertical outlet
grating fixing screws
pedestrian grating
33
Ref. Description Dimensions cmCAI 150 MC HA2 050 K3 Drain with horizontal outlet Ø50 mm 15x15
CAI 150 MC HA2 075 K3 Drain with horizontal outlet Ø75 mm 15x15
CAI 150 MC HA2 110 K3 Drain with horizontal outlet Ø110 mm 15x15
Ref. CAI 150 MC HA2 050 K3
Ref. CAI 150 MC HA2 075 K3
Ref. CAI 150 MC HA2 110 K3
trap
flange
lower part horizontal outlet
Ø137
150
129
65-105
60
Ø50135
Ø137
150
129
65-105
60
Ø75135
Ø137
150
129
65-105
60
Ø110 135
leveling legs and anchoring tab
grating fixing screws
pedestrian grating
strainer
gasket
34
®
Ref. Description Dimensions cmCAI 200 MC VA 075 Drain with vertical outlet Ø75 mm 20x20
CAI 200 MC VA 110 Drain with vertical outlet Ø110 mm 20x20
CAI 200 MC HA 075 Drain with horizontal outlet Ø75 mm 20x20
CAI 200 MC HA 110 Drain with horizontal outlet Ø110 mm 20x20
Ref. CAI 200 MC VA 075
Ref. CAI 200 MC HA 075
Ref. RA13 Anti-slip mesh
Class L
Ref. RA14Plate
Class M
Ref. RA15 LadderClass M
Ref. RA11 Perforated
sheet Class L
DISEÑO siphonic drains in stainless steel (with removable trap)
Standard grating Optional gratings on requestAvailable gratings
Ref. CAI 200 MC VA 110
Ref. CAI 200 MC HA 110
strainer
trap
anchoring tab
standard grating
200
Ø75Ø110
60
2415
16
149.50
MEDIUM CAPACITY DRAINS
200
Ø110
2415
16
137
200
Ø75
Ø110 60
2415
16
149.50 145
200
170
Ø110
2415
16
182
35
DISEÑO RODDING EYES siphonic drains in stainless steel (with removable trap)
Ref. Description Dimensions cmCAI 150 E VA 110 Rodding eye with vertical outlet Ø110 mm with handle 15x15
CAI 160 RE MC VA 110 Rodding eye with vertical outlet Ø110 mm (suction cup included) Ø16
CAI 160 RE VA 110 VIN Rodding eye for vinyl floor vertical outlet Ø110 mm with handle Ø16
Ref. CAI 150 E VA 110
Ref. CAI 160 RE MC VA 110
Ref. CAI 160 RE VA 110 VIN
Suction cup included
Ø220
165
Ø164
Ø110
Ø160
Ø110
14327
Ø110
10
120
150
Siphonic drains made of stainless steel AISI304 and AISI316L, adaptable to different types of flooring, with removable trap to avoid odors and easy to open using a handle or suction cup. Especially designed for commercial and industrial use where strict hygiene and tightness guaranteed by EPDM gasket are required, such as in laboratories, clean rooms, hospitals... Flow capacity: 1.7 l/s.
RODDING EYES
36
®
Ref. CAI 160R MC HA 110 VIN
Ref. CAI 160R MC VA 110 VIN
MEDIUM CAPACITY vinyl floor drains in stainless steel
Ref. Description Dimensions cm Flow l/sCAI 160R MC VA 110 VIN Round vinyl floor drain with vertical outlet Ø16 1.7
CAI 160R MC HA 110 VIN Round vinyl floor drain with horizontal outlet Ø16 1.7
Ø164
Ø220
25
155
Ø170
Ø110
Ø164
Ø220
25
155
Ø110
In spaces where maximum hygiene and durability are required, it is common to install vinyl floors, which are continuous floors, watertight and highly water-resistant. CAINOX offers several drains options, manufactured in AISI304 and AISI3016L (on request) that adapt to this type of floor, with round and square, perforated, plate or refillable gratings, with flange or clamping trays with hidden screws and EPDM gaskets that guarantee tightness. Depending on the model, they incorporate a trap and/or a waste basket that is removable for easy cleaning.
VINYL FLOOR DRAINS
36
37
Optional gratings (on request)
PREMIUM 086 vinyl floor drains in stainless steel
Ref. 086100075VIN
A
B
A+48A+111.7
40.3
121.581.2
Ref. Lisa Ref. Rellenable
Ref. 086150075VIN Ref. 086150110VIN Ref. 086200110VIN
grating
clamping tray
screws
body
Non-siphonicRef. Dimensions cm (A) Dimensions cm (B)
086100075VIN 10x10 Ø75
086150075VIN 15x15 Ø75
086150110VIN 15x15 Ø110
086200110VIN 20x20 Ø110
SiphonicRef. Dimensions cm (A) Dimensions cm (B) Flow l/s
086100075WTVIN 10x10 Ø75 0.5
086150075WTVIN 15x15 Ø75 0.5
086150110WTVIN 15x15 Ø110 1.7
086200110WTVIN 20x20 Ø110 1.7
Ref. WT75 Ref. WT110
Technical data traps
22
3557
68102
92,96
14
6579
38
® ACCESSORIES
Bowls
Ref. DescriptionCALD100H Polypropylene bowl, horizontal outlet (with flange clamping)
CALD101V Polypropylene bowl, vertical outlet (with flange clamping)
CALD102H PVC bowl, horizontal outlet (without flange clamping)
CALD103V PVC bowl, vertical outlet (without flange clamping)
CALDMIXTA100 PVC bowl, mixed vertical/horizontal outlet (without flange clamping)
CALDMIXTA150 PVC bowl, mixed vertical/horizontal outlet (without flange clamping)
Ø200
Ref. CALD100H Ref. CALD101V
Ref. CALD102H Ref. CALD103V
Ref. CALDMIXTA100 Ref. CALDMIXTA150
100
Ø50
80
67
Ø200
Ø50
10560
Ø159
Ø5090
Ø159
Ø50
101
Ø50
Ø75
Ø7550
97
Ø235Ø149
156
ReductionØ173
Ø40
64,5
Ø105
Ø40
Ref. Description Units/box360S Super-flat ABS plastic trap suitable for waterproofing with SKY membrane, outlet Ø40 mm 1
360ST Super-flat ABS plastic trap with thermo-sealed waterproofing membrane, outlet Ø40 mm 1
SCD50 ABS plastic elbow with sealing gasket, horizontal outlet Ø50 mm 1
MANGUITO50 PVC connection sleeve with female joint to connect to any tube of Ø50 mm 12
Ø66,60 Ø51
79
Ø50.30
Ø50
Ø50
130
Accessories
90o
48.40
Ø4098
330170
Ref. 360S
Ref. 360ST
Ref. SCD50
Ref. MANGUITO50
hair-catching strainer
Ø4
0Ø
40
98
.04
8.4
5.6
97.5130.4
29
.4
98.0
48
.4
47.9
42
.8
97.5
Ø4
0Ø
40
98
.04
8.4
5.6
97.5130.4
29
.4
98.0
48
.4
47.9
42
.8
97.5
Top piece of the trap with pre-marked fold to bend and adapt to wall-standing facilities
39
Frames and Gratings in stainless steel
Ref. 695100
Ref. Description Dimensions cm Units/box695100 Frame and screwed grating with two fixing brackets 10x10 10
695150 Frame and screwed grating with two fixing brackets 15x15 10
Ref. 695150
120
150
6
13
100
2
84
Frames in stainless steel
Gratings in stainless steel
Ref. 697015 (pedestrian grating)
Ref. Description Dimensions cm6852020 Square stainless steel frame 20x20x2.5
6853030 Square stainless steel frame 30x30x2.5
685100100 Rectangular stainless steel frame 10x100x2.5
685150100 Rectangular stainless steel frame 15x100x2.5
685100150 Rectangular stainless steel frame 10x150x2.5
685150150 Rectangular stainless steel frame 15x150x2.5
Ref. Description Dimensions cm6970302020 Square grating for 20x20 cm frame for medium traffic 16.7x16.7x2.5
6970303030 Square grating for 30x30 cm frame for medium traffic 26.7x26.7x2.5
6971680002 Square grating for pedestrian 20x20 cm frame 16.7x16.7x2.5
69703010100 Rectangular grating for Medium Traffic 10x100x2.5
69703015100 Rectangular grating for Medium Traffic 15x100x2.5
69703010150 Rectangular grating for Medium Traffic 10x150x2.5
69703015150 Rectangular grating for Medium Traffic 15x150x2.5
69701510100 Pedestrian rectangular grating 10x100x2.5
69701515100 Pedestrian rectangular grating 15x100x2.5
69701510150 Pedestrian rectangular grating 10x150x2.5
69701515150 Pedestrian rectangular grating 15x150x2.5
Ref. 697030 (mesh grating)
FRAMES AND GRATINGS
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
41
KITCHEN CHANNELS
Ref. 510300
Ref. 510301
300
Ø110Ø186
115
50
300
Ø75
Ø186
115
50
Ref. Dimensions cm Flow l/s510300 30x30 1.6
510301 30x30 1.6
DISEÑO ECONOMIC siphonic drains in stainless steel
The evacuation needs of each kitchen depend on several factors, from the equipment available to the different areas into which it is divided and the function of each one. In order to guarantee the highest efficiency and cover all your requirements, CAINOX offers a wide variety of channels, gratings and drains, giving special importance to hygiene but, without forgetting, the great evacuation capacity, the elimination of bad odors, safety in the work area...
strainer
mesh grating
trap
vertical body
horizontal body
®
42
Ref. Dimensions cm (A) Dimensions cm (B) Outlet699C2001000S/V 200 1000 Vertical
699C2001000S/H 200 1000 Horizontal
699C2001500S/V 200 1500 Vertical
699C2001500S/H 200 1500 Horizontal
699C300600S/V 300 600 Vertical
699C300600S/H 300 600 Horizontal
699C3001000S/V 300 1000 Vertical
699C3001000S/H 300 1000 Horizontal
Ref. Dimensions cm (A x B) Outlet699C.300.300S/V 300 x 300 Vertical
699C.300.300S/H 300 x 300 Horizontal
699C.400.400S/V 400 x 400 Vertical
699C.400.400S/H 400 x 400 Horizontal
KITCHEN CHANNELS
Kitchen channels for tiled or resin flooring
A x B
75
110Ø75
A x B
75
110
Ø110
A+30
B+30
B
Ø110
Ø75
86.33
110
50
50
60
60 86.33
110
Ø110
25
22
22
127.5
127.5Ø110
B
B+30
A
85
196.5
110
Ø110
Kitchen siphonic channel made entirely of stainless steel AISI304 and AISI316L (on request) for concrete, tiled or resin flooring. It incorporates a removable trap to eliminate bad odors and a waste basket to prevent food waste from reaching the general network. It is a low height channel ideal for places where there are installation limitations. Flow capacity: 1.7 l/s.
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
43
55.420
110Ø75
custom
Ø110
190
custom + 111.7custom + 48
Ref. 689C.XXX.XXXS/H
Kitchen channels for vinyl flooring
Ø110
19055.4
20110
custom
Ø110
2055.4 75.3
190
Ø110
Ø110
Ø75
110
custom
custom
custom + 111.7custom + 48
custom + 111.7
custom + 111.7
custom + 48custom
cust
om
cust
om +
48
Kitchen siphonic channel made entirely of stainless steel AISI304 and AISI316L (on request), specially designed for vinyl flooring. It incorporates a trap and a waste basket both removable for easy cleaning. It is manufactured with a screwed tray that acts as a clamping flange for the vinyl, fixing it much more firmly than if it were a perimeter flange. The fixing screws are hidden inside, making it more hygienic since it is not exposed to the passage of people and/or machines and, of course, much more aesthetic. It is made on request. Deadline to be specified. Flow capacity: 1.7 l/s.
SPECIAL LENGTHSCUSTOM-MADE PRODUCTION
clamping tray with hidden screws (from 200 mm width it is manufactured with double row of screws)
Ref. 689C.XXX.XXXS/V
Ref. 689C.XXX.XXXS/HRef. 689C.XXX.XXXS/V
44
®
The current regulations on environmental contamination oblige, both the industrial and catering sectors, to treat the waste generated in their activity, prohibiting direct discharges to the general network of food waste, oils, fats..., so the installation of fat separators is almost essential in any hotel kitchen project, restaurants, hospitals, communities...
The elimination of food residues and fats using the CAINOX biological fat separator, made of AISI304 or AI-SI316L stainless steel (on request), is based on the use of microorganisms (enzymes) capable of converting, through its own metabolism, fats and oils in biodegradable organic compounds, non-toxic and innocuous, automatically scheduling dosages of the enzyme product to facilitate its use and maintenance.
Reference Model Dishes Volume Dimensions (mm)services aprox. litres A B C D E F G H
970070110A Mini Hasta 50 58 684 578 289 110 89 200 100 100
970090110A Standard de 50 a 150 114 756 506 500 110 145 355 100 100
970135110A Midi de 150 a 300 191 756 506 700 110 145 555 100 100
970180110A Maxi de 300 a 500 250 1006 506 700 110 145 555 100 100
970200110A Plus de 500 a 800 300 1200 600 800 110 145 655 100 100
A
B
H
C
D DE
F
G
FAT SEPARATOR
Biological Fat Separator in stainless steel
Dosing device
105
mm
100 mm105 mm
45
SEPARATION
The residual water enters the separator where dividing plates reduce the fat into smaller particles for better suspension.
DIGESTION
Enzymes in the tank and newly incorporated enzymes begin the work of breaking down contaminants.
ELIMINATION
The fats are reduced and once decomposed, they are evacuated to the network with the residual water.
There are three stages in the operation of a biological fat separator:
Automatic dosing device
Enzymatic product drum
Tube with grade (recommended not to exceed 8 m)
Fat tank
Operation:
45
®
46
SKY WATERPROOFING MEMBRANE
In places where the humidity is constant, this can become a very serious problem and an expensive solution. To achieve lasting and effective prevention and protection, it is not necessary to carry out major works. CAINOX SKY Membrane allows an easy, fast and clean installation offering the installer great advantages over other more traditional systems.Waterproofing membrane with high water resistance, composed of two sheets of PP - Polypropylene welded with an intermediate of PE - Polyethylene.
It is characterized by high elasticity, high resistance to traction, elongation and abrasion, total resistance to chemical loads that contain all ceramic coatings and/or cementitious materials, and good flexibility at low temperatures.
Complies with the Construction Regulation (EU) No. 305/2011 and is manufactured under the standardsinternational ISO 9001 standard obtaining the CE certificate.
* The results after aging were measured according to section 4.3.8. of EN1389-1: 2010** Test carried out by APPLUS +
PRODUCT CHARACTERISTICSDESCRIPTION STANDARD PERFORMANCE
Mass per unit area EN 1849-2 210 g/m² (+/- 20 g/m²)
Membrane thickness 0.55 mm (550 μm)
Reaction to fire EN 11925-2 Class F
Water vapor resistance Sd EN 1931 Sd > 50m
Water penetration -Watertightness
EN 1928Method A
Before aging Class W1
After aging Class W1
EN 1928:2000Method B
Positive tightness** - Water pressure applied 250 kPa(= 2.5 bar = 25.49 mH2O)
Tensile strength EN 12311-1Before aging Long. 330 N (-50N) Transv. 220 N (-50N)
After aging Long. 310 N (-50N) Transv. 180 N (-50N)
Elongation EN 12311-1Before aging Long. 35% - 70% Transv. 30% - 60 %
After aging Long. 30% - 60% Transv. 25% - 50%
Abrasion resistance EN 12310-1 Long. 190 N (-40N) Transv. 190 N (-40N)
Dimensional stability EN 11072-2 Long. +/- 0.4% Transv. +/- 0.4%
Work temperature From -20° to +70° C
Low temperature flexibility EN 1109 Does not crack at -40 °
PP non woven sheets
extruded PE sheet
liquid/water
47
Ref. Description Dimensions m m2
TELA
SKY waterproofing membrane 1.5 m wide
2x1.5 3
BOBINA 5 5x1.5 7.5
BOBINA 10 10x1.5 15
BOBINA 20 20x1.5 30
Ref. DescriptionINTERIOR 115 Internal corner three-layer membrane
EXTERIOR 120 External corner three-layer membrane
Ref. INTERIOR 115 Ref. EXTERIOR 120
Ref. Description Dimensions m m2
PIEZA
SKY waterproofing membrane 1 m wide
2x1 2
ROLLO 5 5x1 5
ROLLO 10 10x1 10
ROLLO 20 20x1 20
Accessories Waterproofing Membrane
49
* measures 70, 80, 90 and 100 on request
STAINLESS STEEL WATERTIGHT MANHOLE COVERS
TR01MAP300 x 300 400 x 400 500 x 500 600 x 600 *700 x 700 *800 x 800 *900 x 900 *1000 x 1000
TR01MATA 300 x 300 400 x 400 500 x 500 600 x 600 700 x 700 800 x 800 900 x 900 1000 x 1000
B (free span) 210 x 210 310 x 310 410 x 410 510 x 510 610 x 610 710 x 710 810 x 810 910 x 910
Ref. Description Dimensions cmTR01300300MAP Pedestrian matte manhole cover 30x30x7
TR01400400MAP Pedestrian matte manhole cover 40x40x7
TR01500500MAP Pedestrian matte manhole cover 50x50x7
TR01600600MAP Pedestrian matte manhole cover 60x60x7
TR01700700MAP Pedestrian matte manhole cover 70x70x7
TR01800800MAP Pedestrian matte manhole cover 80x80x7
TR01900900MAP Pedestrian matte manhole cover 90x90x7
TR0110001000MAP Pedestrian matte manhole cover 100x100x7
Ref. Descripción Dimensions cmTR01300300MAT Reinforced matte manhole cover 30x30x7
TR01400400MAT Reinforced matte manhole cover 40x40x7
TR01500500MAT Reinforced matte manhole cover 50x50x7
TR01600600MAT Reinforced matte manhole cover 60x60x7
TR01700700MAT Reinforced matte manhole cover 70x70x7
TR01800800MAT Reinforced matte manhole cover 80x80x7
TR01900900MAT Reinforced matte manhole cover 90x90x7
TR0110001000MAT Reinforced matte manhole cover 100x100x7
Manhole cover in matt/plate finish
A
B
70
reinforcements in covers for medium-heavy traffic
Dimensions in mm
®
50
* measures 70, 80, 90 and 100 on request
Manhole cover in anti-slip finish
Ref. Description Dimensions cmTR01.300.300ANT Reinforced anti-slip manhole cover 30x30x7
TR01.400.400ANT Reinforced anti-slip manhole cover 40x40x7
TR01.500.500ANT Reinforced anti-slip manhole cover 50x50x7
TR01.600.600ANT Reinforced anti-slip manhole cover 60x60x7
*TR01.700.700ANT Reinforced anti-slip manhole cover 70x70x7
*TR01.800.800ANT Reinforced anti-slip manhole cover 80x80x7
*TR01.900.900ANT Reinforced anti-slip manhole cover 90x90x7
*TR01.1000.1000ANT Reinforced anti-slip manhole cover 100x100x7
Ref. Description Dimensions cmTR01.300.300ANP Pedestrian anti-slip manhole cover 30x30x7
TR01.400.400ANP Pedestrian anti-slip manhole cover 40x40x7
TR01.500.500ANP Pedestrian anti-slip manhole cover 50x50x7
TR01.600.600ANP Pedestrian anti-slip manhole cover 60x60x7
*TR01.700.700ANP Pedestrian anti-slip manhole cover 70x70x7
*TR01.800.800ANP Pedestrian anti-slip manhole cover 80x80x7
*TR01.900.900ANP Pedestrian anti-slip manhole cover 90x90x7
*TR01.1000.1000ANP Pedestrian anti-slip manhole cover 100x100x7
STAINLESS STEEL WATERTIGHT MANHOLE COVERS
A
B
70
reinforcements in covers for medium-heavy traffic
TR01ANP300 x 300 400 x 400 500 x 500 600 x 600 700 x 700 800 x 800 900 x 900 1000 x 1000
TR01ANTA 300 x 300 400 x 400 500 x 500 600 x 600 700 x 700 800 x 800 900 x 900 1000 x 1000
B (free span) 210 x 210 310 x 310 410 x 410 510 x 510 610 x 610 710 x 710 810 x 810 910 x 910
Dimensions in mm
51
* measures 70, 80, 90 and 100 on request
Ref. Description Dimensions cmTR05300300P Pedestrian refillable manhole cover 30x30x7
TR05400400P Pedestrian refillable manhole cover 40x40x7
TR05500500P Pedestrian refillable manhole cover 50x50x7
TR05600600P Pedestrian refillable manhole cover 60x60x7
TR05700700P Pedestrian refillable manhole cover 70x70x7
TR05800800P Pedestrian refillable manhole cover 80x80x7
TR05900900P Pedestrian refillable manhole cover 90x90x7
TR0510001000P Pedestrian refillable manhole cover 100x100x7
Ref. Description Dimensions cm
TR05300300 Reinforced refillable manhole cover 30x30x8
TR05400400 Reinforced refillable manhole cover 40x40x8
TR05500500 Reinforced refillable manhole cover 50x50x8
TR05600600 Reinforced refillable manhole cover 60x60x8
TR05700700 Reinforced refillable manhole cover 70x70x8
TR05800800 Reinforced refillable manhole cover 80x80x8
TR05900900 Reinforced refillable manhole cover 90x90x8
TR0510001000 Reinforced refillable manhole cover 100x100x8
Manhole cover in refillable finish
A
B
70
reinforcements in covers for medium-heavy traffic
TR05P300 x 300 400 x 400 500 x 500 600 x 600 *700 x 700 *800 x 800 *900 x 900 *1000 x 1000
TR05A 300 x 300 400 x 400 500 x 500 600 x 600 700 x 700 800 x 800 900 x 900 1000 x 1000
B (free span) 210 x 210 310 x 310 410 x 410 510 x 510 610 x 610 710 x 710 810 x 810 910 x 910
Dimensions in mm
53
ACCESSORIES
Stainless steel profiles
Finish Ref. Length Width
Glossy
D1250015B 2500 15
D1250030B 2500 30
D1244040B 2440 40
Satin
D1250015S 2500 15
D1250030S 2500 30
D1244040S 2440 40
Mirror
D1250015E 2500 15
D1250030E 2500 30
D1244040E 2440 40
Wide range of profiles made of AISI304 stainless steel, available in different finishes and dimensions to meet the specific needs of each space. Stainless steel is an excellent material, very strong, durable and decorative, so it is used to protect the edges and corners of tiled surfaces, for the transition between materials, to save the different heights between different pavements, beautify joints and details with decorative finishes.
DECORATIVE. Profile with excellent adhesion thanks to the lateral perforations that incorporates. It provides a decorative finish on ceramic tiles, giving them a touch of elegance, distinction and a striking effect in all types of interiors and environments. The edge face is protected against damage and scratches with a PVC protective tape.
9 mm
1.5 - 3.0 - 4.0 cm
®
54
ACCESSORIES
Stainless steel profiles
Finish Ref. Length Height
Glossy
J1250008B 2500 8
J1250010B 2500 10
J1250012B 2500 12
J1250014B 2500 14
Mirror
J1244008E 2440 8
J1244010E 2440 10
J1244012E 2440 12
J1244014E 2440 14
Finish Ref. Length Height
Glossy
K1250008B 2500 8
K1250010B 2500 10
K1250012B 2500 12
K1250014B 2500 14
Mirror
K1244008E 2440 8
K1244010E 2440 10
K1244012E 2440 12
K1244014E 2440 14
PROFILE J. Curved profile specially designed for the protection and decoration of exterior corners on ceramic surfaces and external edges of tiled floors, steps and platforms... Its curvature provides a symmetrical and secure finish around the corner, avoiding sharp edges. There is no need to miter the tiles, avoiding breaks, especially in areas with a lot of passage.
PROFILE K. Profile specially designed to protect corners and edges on tile walls, exposed to mechanical stresses and ideal for environments with a high degree of hygiene and safety requirements, such as industrial kitchens, food companies, dining rooms...
8-10-12-14 mm25 mm
48-10-12-14 mm
55
Finish Ref. Length Height
Glossy
M1250011B 2500 11
M1250013B 2500 13
M1250015B 2500 15
M1250024B 2500 24
Mirror
M1244011E 2440 11
M1244013E 2440 13
M1244015E 2440 15
M1244024E 2440 24
Finish Ref. Length Height
Glossy
L1250008B 2500 8
L1250010B 2500 10
L1250012B 2500 12
L1250014B 2500 14
Mirror
L1244008E 2440 8
L1244010E 2440 10
L1244012E 2440 12
L1244014E 2440 14
PROFILE L. End profile also used to form a decorative transition line between two adjacent floors that are different (ceramic, marble...) or the same, simply as an aesthetic motif. Produces a modern and stylish interior image.
PROFILE M. Profile specially designed for stairs. Protects the edges of the stair treads from impacts. Very resistant to passage and great anti-slip capacity thanks to its special grooved surface on the upper part, increasing safety and comfort. Also, they act as trims on the floor joints.
48-10-12-14 mm
11-13-15-24 mm
25 mm
10 mm
®
56
ACCESSORIES
Finish Ref. Length Height
Glossy
R1250008B 2500 8
R1250010B 2500 10
R1250012B 2500 12
R1250014B 2500 14
Mirror
R1244008E 2440 8
R1244010E 2440 10
R1244012E 2440 12
R1244014E 2440 14
Finish Ref. Length Height
Glossy
R2250008B 2500 8
R2250010B 2500 10
R2250012B 2500 12
R2250014B 2500 14
Mirror
R2244008E 2440 8
R2244010E 2440 10
R2244012E 2440 12
R2244014E 2440 14
Stainless steel profiles
PROFILE R1. Very versatile square section profile, since it can be used both for finishing and protecting corners as well as for separating pavements and countertop finishing. Ideal for installation horizontally and vertically, providing different decorative touches on any covering.
PROFILE R2. Square profile used for edge protection in exterior corners and decorate edges of ceramic tiles, separate different types of flooring, finish off window sills or countertops... satisfying the specific needs of each project in both domestic and industrial settings.
4 mm
8-10-12-14 mm
8 mm
8-10-12-14 mm
8
57
Finish Ref. Length Width
Glossy
V1250015B 2500 15
V1250020B 2500 20
V1250032B 2500 32
Mirror
V1244015E 2440 15
V1244020E 2440 20
V1244032E 2440 32
Finish Ref. Length Height
GlossyT1250020B 2500 20
T1250025B 2500 25
MirrorT1244020E 2440 20
T1244025E 2440 25
PROFILE T. T-shaped profile that is used as an ex-pansion profile in interior and exterior areas for hard floors with the same height, as separation and deco-ration of surfaces of different materials, giving the spa-ces an aesthetic continuity.
PROFILE V. 90 ° angled profile used as protection in the join of ceramic pieces that can be sharp creating an elegant and care appearance. It is ideal for use in renovation and restoration work, saving deteriorated edges and old finishes, its installation is easy and quick (error-free operation).
10 mm
20-25 mm
15-20-32 mm
®
58
ACCESSORIES
Finish Ref. Length Width
Glossy
Z1250008B 2500 8
Z1250010B 2500 10
Z1250012B 2500 12
Z1250014B 2500 14
Mirror
Z1244008E 2440 8
Z1244010E 2440 10
Z1244012E 2440 12
Z1244014E 2440 14
Finish Ref. Length Width
Glossy
Z2250008B 2500 8
Z2250010B 2500 10
Z2250012B 2500 12
Z2250014B 2500 14
Mirror
Z2244008E 2440 8
Z2244010E 2440 10
Z2244012E 2440 12
Z2244014E 2440 14
Stainless steel profiles
Ramp-shaped profile that is used to join floors of different heights, to guarantee safety and beautify the joints between them. They are installed at the same time the floor is placed, ensuring an aesthetic and harmonious transition between different textures, colors and materials. They are available in various heights.
Finish Ref. Length Width
Glossy
Z3250008B 2500 8
Z3250010B 2500 10
Z3250012B 2500 12
Z3250014B 2500 14
Mirror
Z3244008E 2440 8
Z3244010E 2440 10
Z3244012E 2440 12
Z3244014E 2440 14
08-10-12-14 mm6 mm
08-10-12-14 mm
22 mm
08-10-12-14 mm
22 mm
4 mm
PROFILE Z1
PROFILE Z2
PROFILE Z3
59
Finish Ref. Length Width
Glossy
Z4250010B 2500 10
Z4250012B 2500 12
Z4250014B 2500 14
Mirror
Z4244010E 2440 10
Z4244012E 2440 12
Z4244014E 2440 14
PROFILE Z4. Ramp-shaped profile designed to provide a secure and beautiful connection between two surfaces of different heights, thus avoiding trips and falls. This model is ideal to be installed once the different floors have been laid (marble, parquet, carpet…) or on existing ones to save their different thicknesses.
Stainless steel profiles
Endless Hose Clamp band in stainless steel
Ref. DescriptionSBMULTI Full set
CABEZSBMULTI Clamps (25 clamps)
CINTASBMULTI Band (8 mm x 5 m)
Ref. SBMULTI
suggestions for installation:
Ref. Description Units/boxMORRION Leaf holder in stainless steel for Ø60-Ø120 tubes 1
Ref. MORRION
Leaf holder in stainless steel
30 mm
10-12-14 mm
®
60
Ref. A B C D ECV75 231 40 57 Ø75 2
CV110 318 65 64 Ø110 3,5
CV125 318 70 71 Ø125 4,1
CV160 350 70 70 Ø160 4,1
CV200 450 110 89 Ø200 4,1
CV250 566 144 104 Ø250 6,2
CV315 728 183 144 Ø315 7,7
Non-return Valves
The non-return valves prevent the backflow of black water in homes during periods of heavy rain or when sewage networks are in low areas. They have an os-cillating clapper that works as a shutter and closes the passage by gravity when the sewage circulates in an unwanted direction. They incorporate a lock key.
Antibird protection in stainless steel
Ref. Description Units/boxP60 60 antibird tines of 100 cm 25
P80 80 antibird tines of 100 cm 25
PAG Protection of large birds 1
Ref. P60
Ref. P80 Ref. PAG
ACCESSORIES
Canalizaciones Inoxidables, S.L. C/ de l’Energia, 51 - Pol. Ind. Les Guixeres
08915 - BadalonaBarcelona - EspañaTel. 93 465 46 16