0800 800 243 [email protected] www.ceg.co
ECODOMESTIC WATER PUMP
WITH ELECTRONIC PRESS CONTROL
FEATURES
SPECIFICATIONS
ECOJET 1000PC
* = 10 lpm at 1.5bar (150kPa)
CAPACITY
304AISI
-0°C +50°C W A T E R & DUST PROTECTED
IP55
MODEL
ECOJET 1000PC
POWER
750W
VOLTAGE
220-240V
CURRENT
5.2A
OUTLET
25mm (1”)
MAX.PRESSURE
46.5m (465kPa)
MAX CAPACITY
80 L/min
INGRESSPROTECTION
IP55
POWER CABLE
LENGTH
1.5m
WEIGHT
10.1kg
PRODUCT CODE
5410102050
The ECOJET Series are self-priming domestic water supply pumps. All parts in contact with the liquid are made from long life, corrosion resistant materials such as: stainless steel AISI 304 and glass reinforced polymer. The ECOJET is created for the Australian and New Zealand markets and uses the latest CAD water hydraulic 3D design technology and manufacturing processes that are used in large commercial models.
■ Electronic automatic constant pressure control system which operates at a constant flow.
■ In built in run dry protection technology.
■ Suction lift up to 8.5m for in ground tanks.
INLET
25mm (1”)
22
Tota
l H
ea
d (M
)
Capacity (lpm)
10
50
45
40
35
30
25
20
15
10
5
0
20 30 40 50 60 70 80 90
ECOJET 1000PC
TECHNICAL DATA
0800 800 243 [email protected] www.ceg.co
20155
10
18498
9814
820
2
354
G1"
G1"80
H
IMPELLERMATERIAL
Stainless Steel 304
MECHANICAL SEAL
Carbon/Ceramic/NBR
SHAFT
Stainless Steel
AISI 420
PUMPBODY
StainlessSteel304
MAX LIQUIDTEMP.
50°C
MAX SUCTION LIFT
8.5m
IMPELLERS
1
Optional ExtraThe installation of a 3L pressure tank after the pump in the system is recommended. This reduces water hammer and pump start/stop cycle, increasing the operating life for your ECOJET and reduces start up wear. By decreasing the pump’s start/stop cycling with a 3L expansion tank, this significantly helps decrease total power consumption.
3L Pressure TankProduct Code 6200104500
Dimensions (mm)