cata
log
ue20
11 -
M02
959C
F -
Rel
. 5
01-1
1
®
2011catalogue
C.I.B. UNIGAS S.p.A.Via L. Galvani, 9 - 35011 CAMPODARSEGO (PD) - ItalyTel. +39 049 9200944 - Fax +39 049 9200945 - 9201269Fax Export +39 049 [email protected] - www.cibunigas.it
Specifi cations and data subject to change without notice. Errors and omissions excepted.
INNOVATION GETS US THERE FIRSTA serious subject deserves to be looked at head-on: today, following standard guidelines is not suffi cient for combating those emissions that contribute to the greenhouse effect. For this reason all of our models have always guaranteed levels of pollutant emission that are decidedly lower than the limits required under international legislation for our sector. Thanks to its “Zero Emissioni NOx” research project, CIB Unigas is taking an active role in setting new standards in the fi eld of environment-friendly design.
213 DAYS AND THEN WE MAKE CHANGESThat’s the average time it takes us to update our range of products: a reaction time dictated by our technological research and our constant desire to keep on surpassing ourselves.
PRODUCTION PHILOSOPHYNot all products are created equal. Including as it does conception, technical planning, product testing, marketing and after-sales assistance, the life-cycle of our products is extremely complex and complete. Everything begins in our research laboratories, where our team of enthusiastic engineers is free to experiment with new materials and new techniques that can create ever cleaner and more effi cient burners. When a prototype is ready, it undergoes testing based on parameters that are much more severe than those required by the market. This is the only way to produce our product lines, with their specifi cally-targeted industrial and private applications.This method based on excellence and constant updating does not, however, prevent CIB Unigas from displaying formidable operational agility, by offering an infi nite range of tailor-made solutions that are surprisingly competitive in terms of time and costs.
THE CONQUEST OF MARKETS: A BIG RESULTIn analysing the relationship between our markets and the company, the management fl exibility of CIB UNIGAS has produced a product that is exported all over the world.The strategic points have been the adaptation to different rules, the specifi c technical and promotional documentation, satisfaction of special requirements and the continuous participation in international exhibitions. In Russia, for example, CIB UNIGAS has defi ned an agreement with an important trade company to promote sales of our burners reserved for that market. It is a big opportunity in a country with great possibilities of development and a satisfying confi rmation of our business policies. Now 55% of our production is exported abroad: an excellent achievment supporting the competitive advantages of CIB UNIGAS.
QUALITY STANDARDS AND CIB UNIGAS: OUR COMMITMENTIn 1995 CIB UNIGAS was certifi ed by one of the most important institutes in Europe for our products and combustion processes: the German TÜV. This is why the Quality System, validated for fi xed terms, assures the company management achieving high standards for their production processes, merchandise control and services. Further encouragement for a company/partner assuring an excellent co-operation for the foreseeable future.
ADVANCING TOWARDS THE FUTUREOne of the goals of CIB UNIGAS was to strengthen the internal distribution of information and to create a new technical structure for the research and development of new industrial products.In the new and modern facility is assembled the nerve centre of the company: General Management, commercial offi ces, control and research labs., production workshops. The qualifi cations of our technicians and the investment in research and human resources, represent the living and continuous engagement to operate and compete in a future assuring stability and dynamism to the company.
CIB UNIGASadvancing towards the future
4
Type:
Model: M- . AB . S . IT. A . 0. 25 . xx
ES Medium-large burners complete with electronic cam, without O2 control, without Inverter.
EO Medium-large burners complete with electronic cam and O2 control, without Inverter.
EI Medium-large burners complete with electronic cam and Inverter, without O2 control.
EK Medium-large burners complete with electronic cam, Inverter and O2 control.
EA Medium-small burners complete with electronic camEB Medium-small burners complete with electronic cam
and inverterEC Medium-small dual fuel burners complete with
electronic camED Medium-small dual fuel burners complete with
electronic cam and inverter
0 2 GAS VALVES1 2 GAS VALVES AND LEAKAGE CONTROLM HYDRAULIC RAMP PRE-HEATERL HYDRAULIC RAM AND PRE-HEATER
EQUIPMENT
A STANDARDY SPECIALB BAKERY OVENSC BAKERY OVENS WITH EXTERNAL AIR INLET
D CHEFG CONTROL PANEL AND JUNCTION BOX E JUNCTION BOXZ WITH EXTERNAL AIR INLET
BURNER MANUFACTURE
IT ITALY... AVAILABLE FOR OTHER COUNTRIES UPON REQUEST
DESTINATION COUNTRY
BLAST TUBE
M - STANDARD DUAL LENGTH BLAST TUBE
L - LONGS - STANDARD
OPERATION
TN - ON/OFFAB - HIGH - LOW FLAMEPR - PROGRESSIVE
MD - FULLY MODULATINGSP - SOFT START
FUEL
M - NATURAL GASL - L.P.G.B - BIOGASC - TOWN GAS G - LIGHT OILA - BIO DIESEL
TYPENG…,P…,R…, S…,LG…,NGX…, LX…,RX…,LO…,G…,PG…,RG…, N…,PN…,RN…,PBY…,HS…,HP…,HR…,KP…,KR…,TP…,TLX …,TG…,TN…,TPBY…,HTP…,KTP…,URB
N - HEAVY OIL UP TO 50 cSt a 50°C (7°E - 50°C)E - HEAVY OIL UP TO 110 cSt a 50°C (15°E - 50°C)D - HEAVY OIL UP TO 400 cSt a 50°C (50°E - 50°C)H - HEAVY OIL UP TO 4000 cSt a 50°C (530°E - 50°C)K - KEROSENEMG - DUAL FUEL BURNERS NATURAL GAS - LIGHT OILMN - DUAL FUEL BURNERS NATURAL GAS - HEAVY OIL
GAS CONNECTION10 1/2”15 1/2”20 3/4”25 1”32 1”1/440 1”1/2
50 2” 65 DN65 80 DN80100 DN100125 DN125
BURNER IDENTIFICATION
5
INDEX
GAS BURNERS Type Output kW Operation Page
IDEA SERIESNG35 - NG70 - NG90
19÷85TNAB
16
IDEA SERIESNG120 - NG140 - NG200
35÷200
TNABPRMD
20
IDEA SERIESNG280 - NG350 - NG400 - NG550
65÷570
TNABPRMD
24
TECNOPRESS SERIESP61 - P65 - P71 - R73A
160÷2.300ABPRMD
30
NOVANTA - CINQUECENTO SERIESR91A - R92A - R93A R512A - R515A - R520A - R525A
480÷8.000PRMD
36
MILLE SERIESR1025 - R1030 - R1040
2.550÷13.000PRMD
42
MINIFLAM SERIESFor kitchens and bakery ovensTecnopan S5 - S10 - S18 / Chef S5
35÷200 TN 45
6
GAS AND DUAL FUEL BURNERS NATURAL GAS/LIGHT OIL LOW NOx
Type Output kW Operation Page
IDEA SERIESNGX35 - NGX70
21÷65
TNABPRMD
52
IDEA SERIESNGX120 - NGX200
35÷150
TNABPRMD
55
IDEA SERIESNGX280 - NGX350 NGX400 - NGX550
60÷490
TNABPRMD
58
TECNOPRESS SERIESLX60 - LX65 - LX72
165÷1.040ABPRMD
63
NOVANTA - CINQUECENTO SERIESRX90 - RX91 RX510 - RX515 - RX520
288÷5.800PRMD
67
CINQUECENTO SERIESHRX512 - HRX515 - HRX520
600÷5.800PRMD
72
MILLE SERIESRX1025 - RX1030
1.000÷10.600PRMD
76
MILLE SERIESHRX1025 - HRX1030
1.000÷10.600PRMD
79
FITTINGS / OPTIONSEXTRA CHARGES FOR MICROPROCESSOR CONTROL
82
7
LIGHT OIL BURNERSLIGHT OIL BURNERS LOW NOx
Type Output kW Operation Page
IDEA SERIESLO35 - LO60 - LO90 LOX35 - LOX60 - LOX90
14÷85
17÷70
TN - AB
TN102
IDEA SERIESLO140 - LO200 LOX140
38÷200
64÷130
TN - AB
TN106
IDEA SERIESLO280 - LO400 - LO550
70÷560TNAB
109
TECNOPRESS SERIESPG30 - PG60 - PG70 - PG81
105÷1.900ABPRMD
112
NOVANTA - CINQUECENTO SERIESRG91 - RG92 - RG93 RG510 - RG515 - RG520 - RG525
550÷8.000ABPRMD
115
MILLE SERIESRG1030 - RG1040
2.550÷13.000PRMD
120
MINIFLAM SERIESFor kitchens and bakery ovensTecnopan G6 - G10 - G18 / Chef G5 - G6
29÷209 TN 122
MINIFLAM 24 Volt DC SERIES(Direct Current)G6-G10-G18
29÷209 TN 124
FITTINGS / OPTIONS 125
8
HEAVY OIL BURNERS Type Output kW Operation Page
MINIFLAM SERIESMechanical atomizationN18
105÷209 TN 128
TECNOPRESS SERIESMechanical atomizationPN30 - PN60 - PN70 - PN81
105÷1.900
TNABPRMD
130
NOVANTA - CINQUECENTO SERIESMechanical atomizationPN91 - PN92 - PN93 RN510 - RN515 - RN520 - RN525
550÷8.000ABPRMD
133
MILLE SERIESMechanical atomizationRN1030 - RN1040
2.550÷13.000PRMD
138
TECNOPRESS - NOVANTA - CINQUECENTO SERIESPneumatic atomizationPBY70PBY90 - PBY91 - PBY92PBY510 - PBY515 - PBY520 - PBY525
290÷7.300PRMD
140
MILLE SERIESPneumatic atomizationPBY1025 - PBY1030 - PBY1040
2.550÷13.000PRMD
144
FITTINGS / OPTIONS 147
9
DUAL FUEL BURNERS NATURAL GAS/LIGHT OIL Type Output kW Operation Page
MINIFLAM SERIESHS5 - HS10 - HS18
35÷200 TN 150
TECNOPRESS SERIESHP20 - HP30 - HP60 - HP72 - HR73A
65÷2.300ABPRMD
153
NOVANTA - CINQUECENTO SERIESHR91A - HR92A - HR93AHR512A - HR515A - HR520A - HR525A
480÷8.000PRMD
158
MILLE SERIESHR1025 - HR1030 - HR1040
2.550÷13.000PRMD
164
FITTINGS / OPTIONS 167
10
DUAL FUEL BURNERS NATURAL GAS/HEAVY OIL
Type Output kW Operation Page
TECNOPRESS SERIESKP60 - KP72 - KP73A
160÷2.300PRMD
170
NOVANTA - CINQUECENTO SERIESKP91A - KP92A - KP93AKR512A - KR515A - KR520A - KR525A
480÷8.000PRMD
173
MILLE SERIESKR1025 - KR1030 - KR1040
2.550÷13.000PRMD
179
FITTINGS / OPTIONS 182
11
BURNER FOR INDUSTRIAL APPLICATIONSWITH SEPARATE FAN
Type Output kW Operation Page
NOVANTA - CINQUECENTO - MILLE SERIESTP90A - TP91A - TP92A - TP93ATP512A - TP515A - TP520A - TP525ATP1030 - TP1050 - TP1080
320÷19.000PRMD
185
NOVANTA - CINQUECENTO - MILLE SERIES(LOW NOx)TLX90 - TLX91TLX510- TLX515 - TLX520TLX1025 - TLX1030
288÷13.000PRMD
185
NOVANTA - CINQUECENTO - MILLE SERIESTG90 - TG91 - TG92 TG510 - TG515 - TG520 - TG525TG1030 - TG1050 - TG1080
264÷19.000PRMD
185
NOVANTA - CINQUECENTO - MILLE SERIESTN90 - TN91 - TN92 TN510 - TN515 - TN520 - TN525TN1030 - TN1050 - TN1080
264÷19.000PRMD
186
NOVANTA - CINQUECENTO - MILLE SERIESTPBY90 - TPBY91 - TPBY92TPBY510 - TPBY515 - TPBY520 - TPBY525TPBY1030 - TPBY1050 - TPBY1080
500÷19.000PRMD
186
NOVANTA - CINQUECENTO - MILLE SERIESHTP90A - HTP91A - HTP92A - HTP93A HTP512A - HTP515A - HTP520A - HTP525AHTP1030 - HTP1050 - HTP1080
320÷19.000PRMD
186
NOVANTA - CINQUECENTO - MILLE SERIESKTP90A - KTP91A - KTP92A - KTP93A KTP512A - KTP515A - KTP520A - KTP525AKTP1030 - KTP1050 - KTP1080
320÷19.000PRMD
187
12
REGISTER BURNERSFOR INDUSTRIAL APPLICATIONS
Type Output kW Operation Page
URB SERIESURB5 - URB10 - URB15 - URB20 - URB25 - URB30 - URB32 - URB35 - URB40 - URB45 - URB50 - URB60 - URB70
7.000÷67.000PRMD
188
13
14
g a s b u r n e r s
idea seriesNG35 - TNNG70 - TN/ABNG90 - TN/ABNG120 - TNNG140 - TN/AB/PR/MD
NG200 - TN/AB/PR/MDNG280 - TN/ABNG350 - TN/PR/MDNG400 - TN/PR/MDNG550 - TN/PR/MD
tecnopress seriesP61 - AB/PR/MDP65 - AB/PR/MDP71 - AB/PR/MDR73A - AB/PR/MD
Tipo
NG120
NG140
NG140
NG200
NG280
NG280
P61
P65
P71
P71
R73A
R91A
R92A
R512A
R515A
R525A
R1025
R1030
R1030
R1040
NG35
(from 600 to 4.500 kW)
(from 480 to 3.050 kW)
(from 480 to 2.670 kW)
(from 320 to 2.300 kW)
(from 300 to 1.650 kW)
(from 300 to 1.200 kW)
(from 270 to 970 kW)
(from 160 to 800 kW)
(from 42 to 200 kW)
(from 35 to 170 kW)
(from 60 to 170 kW)
(from 60 to 120 kW)
NG90
NG70
(from 65 to 300 kW)
(from 95 to 300 kW)
(from 22 to 85 kW)
(from 19 to 68 kW)
(from 770 to 5.200 k
(from 20 to 41 kW)
NG70 (from 30 to 70 kW)
NG90 (from 40 to 85 kW)
NG200 (from 85 to 200 kW)
NG350
NG350
NG400
NG400
NG550 (from 245 to 570 kW)
(from 115 to 420 kW)
(from 185 to 420 kW)
(from 80 to 330 kW)
(from 115 to 330 kW)
NG550 (from 160 to 570 kW)
R520A
R93A (from 550 to 4.100 kW)
Type
15
novanta - cinquecento seriesR91A - PR/MDR92A - PR/MDR93A - PR/MD
R512A - PR/MDR515A - PR/MDR520A - PR/MDR525A - PR/MD
mille seriesR1025 - PR/MDR1030 - PR/MDR1040 - PR/MD
(from 2.550 to 10.600 kW)
(from 2.550 to 9.500 kW)
(from 2.550 to 8.700 kW)
(from 2.000 to 8.000 kW)
W)
(from 1.000 to 6.400 kW)
(from 2.550 to 13.000 kW)
16
These burners are, in dimensions and output, the smallest burners of the new line IDEA-gas.NG35 burner can be arranged to use external combustion air on request. In this case the burner will be supplied with a watertight and airtight air intake, linked outside by means of a duct ten metres long.Combustion air can be easily set by the adjusting screw without removing the cover. The cover, easily removable, is heat resistant (ABS material).The burner is designed to be aesthetic and fun-ctional but at the same time gives prominence to innovative technologies; in fact all components can be fitted into a backing plate which can be moved and attached to special fixings within the burner to make maintenance easier.
NG90 ABNG90 TNNG70 ABNG70 TNNG35 TN
GAS
ideaseriesNG35-NG70-NG90
External air inlet version
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
17
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW Rp
NG35 M-.TN.x.IT.A.0.xx 20 41 230V 1N ac 0.075 1⁄2” NG70 M-.TN.x.IT.A.0.xx 30 70 230V 1N ac 0.1 1⁄2” NG70 M-.AB.x.IT.A.0.xx 19 68 230V 1N ac 0.1 1⁄2” NG90 M-.TN.x.IT.A.0.xx 40 85 230V 1N ac 0.1 1⁄2” - 3⁄4” NG90 M-.AB.x.IT.A.0.xx 22 85 230V 1N ac 0.1 1⁄2” - 3⁄4”
TECHNICAL DETAILS
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
NG35 290 260 490 10 NG70 400 300 520 14 NG90 400 300 520 14
Burner flangeSuggested boiler drilling
For the configuration of the gas train, see pages 98-99
(*) Approximate values
◆ Burner equipped with external air inlet. In compliance with DIRECTIVE 2009/142/CE
GAS
ideaseriesNG35-NG70-NG90
Type Model Overall dimensions* (mm)
A B C D E F G H J K L M N OP
Q R S T W X
min.max. min.max. min. max. min. max. min. max. min.NG35 M-.TN.S.IT.A.0.10 338 34 78 260 305 269 14 255 Ø80 Ø95 86 162 194 M8 158 86 138 112 277 322 109 154 168 27 400 275NG35 M-.TN.L.IT.A.0.10 416 34 156 260 383 269 14 255 Ø80 Ø95 86 162 194 M8 158 86 138 112 277 400 109 232 168 27 400 275NG70 M-.xx.S.IT.A.0.10 365 34 78 287 332 305 14 291 Ø80 Ø95 99 162 218 M8 158 86 138 112 285 330 118 163 168 14 438 299NG70 M-.xx.L.IT.A.0.10 443 34 156 287 410 305 14 291 Ø80 Ø95 99 162 218 M8 158 86 138 112 285 408 118 241 168 14 438 299NG90 M-.xx.S.IT.A.0.10 365 34 70 295 331 305 14 291 Ø80 Ø95 99 162 218 M8 158 86 138 112 293 329 125 203 168 2 438 299NG90 M-.xx.L.IT.A.0.10 443 34 148 295 409 305 14 291 Ø80 Ø95 99 162 218 M8 158 86 138 112 293 407 125 239 168 2 438 299
NG35 NG70 NG90Model Gas train Operation Code Price € Code Price € Code Price €
M-.TN.S.IT.A.0.10 ½” TN 024010141 025010141 025010341M-.TN.L.IT.A.0.10 ½” TN 024010241 025010241 025010441M-.TN.S.IT.A.0.15 ½” TN 024011041 025010941 025010541M-.TN.L.IT.A.0.15 ½” TN 024011141 025011041 025010641M-.TN.S.IT.A.0.20 ¾” TN - - 025010741M-.TN.L.IT.A.0.20 ¾” TN - - 025010841M-.TN.S.IT.Z.0.10 ◆ ½” TN 024010341 - -M-.TN.L.IT.Z.0.10 ◆ ½” TN 024010441 - -M-.TN.S.IT.Z.0.15 ◆ ½” TN 024011241 - -M-.TN.L.IT.Z.0.15 ◆ ½” TN 024011341 - -M-.AB.S.IT.A.0.10 ½” AB - 025010142 025010342M-.AB.L.IT.A.0.10 ½” AB - 025010242 025010442M-.AB.S.IT.A.0.15 ½” AB - 025010942 025010542M-.AB.L.IT.A.0.15 ½” AB - 025011042 025010642M-.AB.S.IT.A.0.20 ¾” AB - - 025010742M-.AB.L.IT.A.0.20 ¾” AB - - 025010842
18
GASNG35-NG70-NG90ideaseries
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
19
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
GAS NG35-NG70-NG90
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
ideaseries
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
20
With the new line IDEA, CIB UNIGAS presents to the market a new concept of modern, functional burners for small and medium appliances.These burners are particularly suitable to work on high efficiency boilers. The burner is designed to be aesthetic and functional but at the same time gives prominence to innovative technologies.The cover, easily removable, is heat resistant (ABS material). Moreover the new boiler connection flange improves the seal and overall dimensions.A sight glass is provided for visualgihting of the flame during operation. All components can be fitted into a backing platewhich can be moved and attached to special fixings within the burner to make maintenance easier.Combustion head can be easily set by the adjusting screw, without removing the cover. A special air inlet ensures the lowest noises level.
NG120 TN
NG140 TN
NG140 AB
NG200 TN
NG200 AB
GASNG120-NG140-NG200ideaseries
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
21
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
NG120/140/200 S 600 370 400 25 NG120/140/200 L 750 370 400 25
Suggested boiler drilling
Burner flange
TECHNICAL DETAILS
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CE
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW Rp
NG120 M-.TN.x.IT.A.0.15 60 120 230V 1N ac 0.18 1⁄2” NG140 M-.TN.x.IT.A.0.xx 60 170 230V 1N ac 0.18 3⁄4” - 1” NG140 M-.xx.x.IT.A.0.xx 35 170 230V 1N ac 0.18 3⁄4” - 1” NG200 M-.TN.x.IT.A.0.xx 85 200 230V 1N ac 0.18 3⁄4” - 1” NG200 M-.xx.x.IT.A.0.xx 42 200 230V 1N ac 0.18 3⁄4” - 1”For the configuration of the gas train, see pages 98-99
(*) Approximate values
GAS NG120-NG140-NG200
Type Model Overall dimensions* (mm)
A B C D G H J K L M N O P Q R S T W X Y
min. max. min.max. min.max. min.max. min.max. min.NG120 M-.xx.S.IT.A.0.15 560 85 170 390 475 374 Ø101Ø128 161 188 245 M8 188 109 158 133 382 467 202 287 180 32 537 340 Ø108NG120 M-.xx.L.IT.A.0.15 660 85 270 390 575 374 Ø101Ø128 161 188 245 M8 188 109 158 133 382 567 202 387 180 32 537 340 Ø108NG140 M-.xx.S.IT.A.0.20 560 85 170 390 475 374 Ø101Ø128 161 188 245 M8 188 109 158 133 382 467 202 287 180 32 537 340 Ø108NG140 M-.xx.L.IT.A.0.20 660 85 270 390 575 374 Ø101Ø128 161 188 245 M8 188 109 158 133 382 567 202 387 180 32 537 340 Ø108NG140 M-.xx.S.IT.A.0.25 560 85 170 390 475 374 Ø101Ø128 161 188 245 M8 188 109 158 133 426 511 202 287 224 32 565 340 Ø108NG140 M-.xx.L.IT.A.0.25 660 85 270 390 575 374 Ø101Ø128 161 188 245 M8 188 109 158 133 426 611 202 387 224 32 565 340 Ø108NG200 M-.xx.S.IT.A.0.20 560 85 170 390 475 374 Ø117Ø137 161 188 245 M8 188 109 158 133 382 467 202 287 180 32 537 340 Ø108NG200 M-.xx.L.IT.A.0.20 660 85 270 390 575 374 Ø117Ø137 161 188 245 M8 188 109 158 133 382 567 202 387 180 32 537 340 Ø108NG200 M-.xx.S.IT.A.0.25 560 85 170 390 475 374 Ø117Ø137 161 188 245 M8 188 109 158 133 426 511 202 287 224 32 565 340 Ø108NG200 M-.xx.L.IT.A.0.25 660 85 270 390 575 374 Ø117Ø137 161 188 245 M8 188 109 158 133 426 611 202 387 224 32 565 340 Ø108
NG120 NG140 NG200Model Gas train Operation Code Price € Code Price € Code Price €
M-.TN.S.IT.A.0.15 ½” TN 026010141 - -M-.TN.L.IT.A.0.15 ½” TN 026010241 - -M-.TN.S.IT.A.0.20 ¾” TN - 026010341 026010941M-.TN.L.IT.A.0.20 ¾” TN - 026010441 026011041M-.TN.S.IT.A.0.25 1” TN - 026010541 026011141M-.TN.L.IT.A.0.25 1” TN - 026010641 026011241M-.AB.S.IT.A.0.20 ¾” AB - 026010342 026010942M-.AB.L.IT.A.0.20 ¾” AB - 026010442 026011042M-.AB.S.IT.A.0.25 1” AB - 026010542 026011142M-.AB.L.IT.A.0.25 1” AB - 026010642 026011242M-.PR.S.IT.A.0.25 1” PR - 026010543 026011143M-.PR.L.IT.A.0.25 1” PR - 026010643 026011243M-.MD.S.IT.A.0.25 1” MD(*) - 026010544 026011144M-.MD.L.IT.A.0.25 1” MD(*) - 026010644 026011244
ideaseries
22
GASNG120-NG140-NG200ideaseries
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
23
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
GAS NG120-NG140-NG200
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
ideaseries
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
24
With the new line IDEA, CIB UNIGAS presents on the market a new conception of modern and functional burners for small and medium appliances. These burners, which are the most powerful of the range IDEA, are particularly suitable to work on boilers with high back pressures. In particular, NG350 and 400 fit a single “modular” blast tube suitable for standard and extensive uses.The series IDEA is the final result of big investments in research and new technologies. For example this new range of burners is provided with a linear and proportional system of supply between gas flow rate and angle of the butterfly valve, to ensure a smooth and regular combustion.The burner, in all versions, are “friendly user”.There are plugs which can be easily connected to the feeding line, all mechanical components are mounted on a plate which can be quickly taken off for maintenance. The head is adjustable through a graduated screw. The gas train can be mounted either on the right side or on the left side.
NG280 TNNG280 ABNG350 TNNG350 PRNG400 TNNG400 PRNG550 TNNG550 PR
GASNG280-NG350-NG400-NG550ideaseries
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
25
TECHNICAL DETAILS
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
NG280/350/400 1120 440 580 42 NG550 1200 460 630 55
Suggested boiler drilling
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW Rp
NG280 M-.TN.x.IT.A.0.xx 95 300 230V 1N ac 0.25 1” - 1”1⁄4 - 1”1⁄2 NG280 M-.AB.x.IT.A.0.xx 65 300 230V 1N ac 0.25 1” - 1”1⁄4 - 1”1⁄2 NG350 M-.TN.M.IT.A.0.xx 115 330 230V 1N ac 0.37 1” - 1”1⁄4 - 1”1⁄2 NG350 M-.PR.M.IT.A.0.xx 80 330 230V 1N ac 0.37 1” - 1”1⁄4 - 1”1⁄2 NG400 M-.TN.M.IT.A.0.xx 185 420 230V 1N ac 0.45 1” - 1”1⁄4 - 1”1⁄2 - 2” NG400 M-.PR.M.IT.A.0.xx 115 420 230V 1N ac 0.45 1” - 1”1⁄4 - 1”1⁄2 - 2” NG550 M-.TN.x.IT.A.0.xx 245 570 230V 1N ac 0.62 1”1⁄4 - 1”1⁄2 - 2” NG550 M-.PR.x.IT.A.0.xx 160 570 230V 1N ac 0.62 1”1⁄4 - 1”1⁄2 - 2”
For the configuration of the gas train, see pages 98-99
(*) Approximate values
Burner flange
GAS NG280-NG350-NG400-NG550
Type Model Overall dimensions* (mm)
A B C D E F G H J K M N O P Q R S T W X Y
stand. exten. stand. exten. 1 2 min.max.NG280 M-.TN.x.IT.A.0.25/32 733 878 163 308 570 596 200 396 117 137 348 215 223 M10 219 131 179 155 541 366 175 128 508 491 108NG280 M-.xx.x.IT.A.0.40 733 878 163 308 570 726 330 396 117 137 348 215 223 M10 219 131 179 155 541 366 175 128 517 491 108NG350 M-.xx.M.IT.A.0.25/32 748 878 178 308 570 596 200 396 125 164 348 215 223 M10 219 131 179 155 541 366 175 89 508 491 144NG350 M-.xx.M.IT.A.0.40 748 878 178 308 570 726 330 396 125 164 348 215 223 M10 219 131 179 155 541 366 175 89 517 491 144NG400 M-.xx.M.IT.A.0.25/32 768 898 198 328 570 596 200 396 144 164 348 215 223 M10 219 131 179 155 541 366 175 89 508 491 144NG400 M-.xx.M.IT.A.0.40 768 898 198 328 570 726 330 396 144 164 348 215 223 M10 219 131 179 155 541 366 175 89 517 491 144NG400 M-.xx.M.IT.A.0.50 768 898 198 328 570 726 330 396 144 164 348 215 223 M10 219 131 179 155 541 366 175 89 567 491 144NG550 M-.xx.x.IT.A.0.32 843 943 253 353 590 671 245 426 158 178 384 241 241 M10 247 157 192 174 552 377 175 69 543 533 155NG550 M-.xx.x.IT.A.0.40 843 943 253 353 590 744 318 426 158 178 384 241 241 M10 247 157 192 174 552 377 175 69 553 533 155NG550 M-.xx.x.IT.A.0.50 843 943 253 353 590 744 318 426 158 178 384 241 241 M10 247 157 192 174 552 377 175 69 603 533 155
ideaseries
26
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CE
Microprocessor-controlled burners (see page 82)
GASNG280-NG350-NG400-NG550
NG280 NG350Model Gas train Operation Code Price € Code Price €
M-.TN.S.IT.A.0.25 1” TN 027011741 -M-.TN.L.IT.A.0.25 1” TN 027011841 -M-.TN.S.IT.A.0.32 1”¼ TN 027011941 -M-.TN.L.IT.A.0.32 1”¼ TN 027012041 -M-.TN.S.IT.A.0.40 1”½ TN 027012141 -M-.TN.L.IT.A.0.40 1”½ TN 027012241 -M-.AB.S.IT.A.0.25 1” AB 027011742 -M-.AB.L.IT.A.0.25 1” AB 027011842 -M-.AB.S.IT.A.0.32 1”¼ AB 027011942 -M-.AB.L.IT.A.0.32 1”¼ AB 027012042 -M-.AB.S.IT.A.0.40 1”½ AB 027012142 -M-.AB.L.IT.A.0.40 1”½ AB 027012242 -M-.TN.M.IT.A.0.25 1” TN - 027010141M-.TN.M.IT.A.0.32 1”¼ TN - 027010241M-.TN.M.IT.A.0.40 1”½ TN - 027010341M-.PR.M.IT.A.0.25 1” PR - 027010143M-.PR.M.IT.A.0.32 1”¼ PR - 027010243M-.PR.M.IT.A.0.40 1”½ PR - 027010343M-.MD.M.IT.A.0.25 1” MD(*) - 027010144M-.MD.M.IT.A.0.32 1”¼ MD(*) - 027010244M-.MD.M.IT.A.0.40 1”½ MD(*) - 027010344
ideaseries
27
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CE
Microprocessor-controlled burners (see page 82)
GAS NG280-NG350-NG400-NG550
NG400 NG550Model Gas train Operation Code Price € Code Price €
M-.TN.M.IT.A.0.25 1” TN 027010441 -M-.TN.M.IT.A.0.32 1”¼ TN 027010541 -M-.TN.M.IT.A.0.40 1”½ TN 027010641 -M-.TN.M.IT.A.0.50 2” TN 027010741 -M-.PR.M.IT.A.0.25 1” PR 027010443 -M-.PR.M.IT.A.0.32 1”¼ PR 027010543 -M-.PR.M.IT.A.0.40 1”½ PR 027010643 -M-.PR.M.IT.A.0.50 2” PR 027010743 -M-.MD.M.IT.A.0.25 1” MD(*) 027010444 -M-.MD.M.IT.A.0.32 1”¼ MD(*) 027010544 -M-.MD.M.IT.A.0.40 1”½ MD(*) 027010644 -M-.MD.M.IT.A.0.50 2” MD(*) 027010744 -M-.TN.S.IT.A.0.32 1”¼ TN - 028010141M-.TN.L.IT.A.0.32 1”¼ TN - 028010241M-.TN.S.IT.A.0.40 1”½ TN - 028010341M-.TN.L.IT.A.0.40 1”½ TN - 028010441M-.TN.S.IT.A.0.50 2” TN - 028010541M-.TN.L.IT.A.0.50 2” TN - 028010641M-.PR.S.IT.A.0.32 1”¼ PR - 028010143M-.PR.L.IT.A.0.32 1”¼ PR - 028010243M-.PR.S.IT.A.0.40 1”½ PR - 028010343M-.PR.L.IT.A.0.40 1”½ PR - 028010443M-.PR.S.IT.A.0.50 2” PR - 028010543M-.PR.L.IT.A.0.50 2” PR - 028010643M-.MD.S.IT.A.0.32 1”¼ MD(*) - 028010144M-.MD.L.IT.A.0.32 1”¼ MD(*) - 028010244M-.MD.S.IT.A.0.40 1”½ MD(*) - 028010344M-.MD.L.IT.A.0.40 1”½ MD(*) - 028010444M-.MD.S.IT.A.0.50 2” MD(*) - 028010544M-.MD.L.IT.A.0.50 2” MD(*) - 028010644
ideaseries
28
GASNG280-NG350-NG400-NG550ideaseries
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
29
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
GAS NG280-NG350-NG400-NG550
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
ideaseries
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
30
P61 AB-PR-MDP65 AB-PR-MD
P71 AB-PR-MD..0.xxP71 AB-PR-MD..1.xx
R73A AB-PR-MD
Tecnopress burners cover a wide range of applications from 65 to 2300 kW and are suitable either for heating generators with high back pressure or suction in combustion chamber. This series represents the highest expression of our experience on gas burners. The combustion head “bell shaped” is able to produce high performance flame. The practicality of all set-up devices together with an easy maintenance procedure and a high quality/price ratio make this product very competitive.For efficient combustion and good mixing between gas and air, the position of the combustion head can be modified backwards and forwards by means of a screw adjustment. In addition, an adjustable cam driven by the modulating motor allows a smooth transition from low to high fire.A circuit board with pre-wired plug connections, inside the control panel, ensures correct wiring in case of maintenance.
GASP61-P65-P71-R73Atecnopress series
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
31
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW
P61 M-.xx.x.IT.A.0.xx 160 800 230/400V 3N ac 1.1 1”1/4-1”1/2-2” - DN65 P65 M-.xx.x.IT.A.0.xx 270 970 230/400V 3N ac 1.5 1”1/2-2” - DN65 P71 M-.xx.x.IT.A.0.xx 300 1.200 230/400V 3N ac 2.2 1”1/2-2” - DN65 - DN80 P71 M-.xx.x.IT.A.1.xx 300 1.650 230/400V 3N ac 2.2 1”1/2-2” - DN65 - DN80 R73A M-.xx.S.IT.A.1.xx 320 2.300 230/400V 3N ac 3 2” - DN65 - DN80
(*) Approximate values (regarding model with gas train DN 65)(**) Approximate values (regarding model with gas train DN 80)
Type Packaging dimensions* (mm) l p h kg
P61* 1200 670 540 60 P65* 1280 850 760 100 P71** 1280 850 760 120 R73A** 1280 850 760 125
For the configuration of the gas train, see pages 98-99
P61 P65 - P71 - R73A
(*) Approximate values
Suggested boiler drilling
Burner flangeSuggested
boiler drillingBurner flange
GAS P61-P65-P71-R73A
Type Model Overall dimensions* (mm)
AS AL AA BS BL BB C CC D E F G H J K L M N O P Q R S U V W Y Z
min. maxP61 M-.xx.x.IT.A.0.32 1079 1169 99 343 433 314 736 298 812 500 312 184 204 210 240 344 M10 269 190 190 190 341 112 229 444 - 464 162 120P61 M-.xx.x.IT.A.0.40 1079 1169 99 343 433 314 736 298 812 500 312 184 204 210 240 344 M10 269 190 190 190 439 112 327 444 - 464 162 120P61 M-.xx.x.IT.A.0.50 1079 1169 99 343 433 314 736 298 812 500 312 184 204 210 240 344 M10 269 190 190 190 447 112 335 444 - 464 162 120P61 M-.xx.x.IT.A.0.65 1079 1169 99 343 433 314 736 298 997 685 312 184 204 250 240 420 M10 269 190 190 190 515 112 403 540 313 540 162 120P65 M-.xx.x.IT.A.0.40 1129 1219 130 326 416 373 803 316 900 568 332 184 218 208 300 376 M10 330 216 250 233 457 130 327 519 - 531 198 155P65 M-.xx.x.IT.A.0.50 1129 1219 130 326 416 373 803 316 900 568 332 184 218 208 300 376 M10 330 216 250 233 465 130 335 519 - 531 198 155P65 M-.xx.x.IT.A.0.65 1129 1219 130 326 416 373 803 316 998 666 332 184 218 275 300 393 M10 330 216 250 233 533 130 403 565 313 548 198 155P71 M-.xx.x.IT.A.1.40 1188 1298 130 385 495 373 803 316 1026 694 332 234 264 208 300 376 M10 330 216 250 233 457 130 327 519 - 531 198 155P71 M-.xx.x.IT.A.1.50 1188 1298 130 385 495 373 803 316 1026 694 332 234 264 208 300 376 M10 330 216 250 233 465 130 335 519 - 531 198 155P71 M-.xx.x.IT.A.1.65 1188 1298 130 385 495 373 803 316 1104 772 332 234 264 275 300 393 M10 330 216 250 233 533 130 403 565 313 548 198 155P71 M-.xx.x.IT.A.1.80 1188 1298 130 385 495 373 803 316 1106 774 332 234 264 275 300 407 M10 330 216 250 233 574 130 444 565 344 562 198 155R73A M-.xx.x.IT.A.1.50 1303 - 130 500 - 373 803 316 1026 694 332 234 264 208 300 376 M10 330 216 250 233 465 130 335 519 - 531 198 155R73A M-.xx.x.IT.A.1.65 1303 - 130 500 - 373 803 316 1104 772 332 234 264 275 300 393 M10 330 216 250 233 533 130 403 565 313 548 198 155R73A M-.xx.x.IT.A.1.80 1303 - 130 500 - 373 803 316 1106 774 332 234 264 275 300 407 M10 330 216 250 233 574 130 444 565 344 562 198 155
tecnopress series
32
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CEMicroprocessor-controlled burners (see page 82)
GASP61-P65-P71-R73A
P61 P65Model Gas train Operation Code Price € Code Price €
M-.AB.S.IT.A.0.32 1”1/4 AB 004013942M-.AB.L.IT.A.0.32 1”1/4 AB 004014042M-.AB.S.IT.A.0.40 1”½ AB 004014142 008011542M-.AB.L.IT.A.0.40 1”½ AB 004014242 008012042M-.AB.S.IT.A.0.50 2” AB 004014342 008010942M-.AB.L.IT.A.0.50 2” AB 004014442 008011042M-.AB.S.IT.A.0.65 DN65 AB 004014542 008011142M-.AB.L.IT.A.0.65 DN65 AB 004014642 008011242M-.PR.S.IT.A.0.32 1”1/4 PR 004013943M-.PR.L.IT.A.0.32 1”1/4 PR 004014043M-.PR.S.IT.A.0.40 1”½ PR 004014143 008011543M-.PR.L.IT.A.0.40 1”½ PR 004014243 008012043M-.PR.S.IT.A.0.50 2” PR 004014343 008010943M-.PR.L.IT.A.0.50 2” PR 004014443 008011043M-.PR.S.IT.A.0.65 DN65 PR 004014543 008011143M-.PR.L.IT.A.0.65 DN65 PR 004014643 008011243M-.MD.S.IT.A.0.32 1”1/4 MD(*) 004013944M-.MD.L.IT.A.0.32 1”1/4 MD(*) 004014044M-.MD.S.IT.A.0.40 1”½ MD(*) 004014144 008011544M-.MD.L.IT.A.0.40 1”½ MD(*) 004014244 008012044M-.MD.S.IT.A.0.50 2” MD(*) 004014344 008010944M-.MD.L.IT.A.0.50 2” MD(*) 004014444 008011044M-.MD.S.IT.A.0.65 DN65 MD(*) 004014544 008011144M-.MD.L.IT.A.0.65 DN65 MD(*) 004014644 008011244
tecnopress series
33
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)■ = Burner equipped with external air inletIn compliance with DIRECTIVE 2009/142/CEMicroprocessor-controlled burners (see page 82)
GAS P61-P65-P71-R73A
P71 R73AModel Gas train Operation Code Price € Code Price €
M-.AB.S.IT.A.0.40 1”½ AB 008014142M-.AB.L.IT.A.0.40 1”½ AB 008014242M-.AB.S.IT.A.0.50 2” AB 008014342 -M-.AB.L.IT.A.0.50 2” AB 008014442 -M-.AB.S.IT.A.0.65 DN65 AB 008014542 -M-.AB.L.IT.A.0.65 DN65 AB 008014642 -M-.AB.S.IT.A.0.80 DN80 AB 008014742 -M-.AB.L.IT.A.0.80 DN80 AB 008014842 -M-.PR.S.IT.A.0.40 1”½ PR 008014143M-.PR.L.IT.A.0.40 1”½ PR 008014243M-.PR.S.IT.A.0.50 2” PR 008014343 M-.PR.L.IT.A.0.50 2” PR 008014443 -M-.PR.S.IT.A.0.65 DN65 PR 008014543 -M-.PR.L.IT.A.0.65 DN65 PR 008014643 -M-.PR.S.IT.A.0.80 DN80 PR 008014743 -M-.PR.L.IT.A.0.80 DN80 PR 008014843 -M-.MD.S.IT.A.0.40 1”½ MD* 008014144M-.MD.L.IT.A.0.40 1”½ MD* 008014244M-.MD.S.IT.A.0.50 2” MD(*) 008014344 -M-.MD.L.IT.A.0.50 2” MD(*) 008014444 -M-.MD.S.IT.A.0.65 DN65 MD(*) 008014544 -M-.MD.L.IT.A.0.65 DN65 MD(*) 008014644 -M-.MD.S.IT.A.0.80 DN80 MD(*) 008014744 -M-.MD.L.IT.A.0.80 DN80 MD(*) 008014844 -M-.AB.S.IT.A.1.40 ■ 1”½ AB 008014152M-.AB.L.IT.A.1.40 ■ 1”½ AB 008014252M-.AB.S.IT.A.1.50 ■ 2” AB 008014352 008015452M-.AB.L.IT.A.1.50 ■ 2” AB 008014452 -M-.AB.S.IT.A.1.65 ■ DN65 AB 008014552 008015552 M-.AB.L.IT.A.1.65 ■ DN65 AB 008014652 -M-.AB.S.IT.A.1.80 ■ DN80 AB 008014752 008015652 M-.AB.L.IT.A.1.80 ■ DN80 AB 008014852 -M-.PR.S.IT.A.1.40 ■ 1”½ PR 008014153M-.PR.L.IT.A.1.40 ■ 1”½ PR 008014253M-.PR.S.IT.A.1.50 ■ 2” PR 008014353 008015453M-.PR.L.IT.A.1.50 ■ 2” PR 008014453 -M-.PR.S.IT.A.1.65 ■ DN65 PR 008014553 008015553M-.PR.L.IT.A.1.65 ■ DN65 PR 008014653 -M-.PR.S.IT.A.1.80 ■ DN80 PR 008014753 008015653M-.PR.L.IT.A.1.80 ■ DN80 PR 008014853 -M-.MD.S.IT.A.1.40 ■ 1”½ MD(*) 008014154M-.MD.L.IT.A.1.40 ■ 1”½ MD(*) 008014254M-.MD.S.IT.A.1.50 ■ 2” MD(*) 008014354 008015454M-.MD.L.IT.A.1.50 ■ 2” MD(*) 008014454 -M-.MD.S.IT.A.1.65 ■ DN65 MD(*) 008014554 008015554M-.MD.L.IT.A.1.65 ■ DN65 MD(*) 008014654 -M-.MD.S.IT.A.1.80 ■ DN80 MD(*) 008014754 008015654M-.MD.L.IT.A.1.80 ■ DN80 MD(*) 008014854 -
tecnopress series
34
P61 AB-PR-MD
P71 AB-PR-MD..0.xx P71 AB-PR-MD..1.xx
GASP61-P65-P71-R73Atecnopress series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
35
Rp 1”1/4 (32)
Rp 1”1/2 (40)
Rp 2” (50)
DN50
P61 AB-PR-MD
P71 AB-PR-MD..0.xx
Rp 1”1/2 (40)
Rp 2” (50)
DN65
DN80
50
P71 AB-PR-MD..1.xx
Rp 1”1/2 (40)
R73A AB-PR-MD
Rp 1”1/2 (40)
Rp 2” (50)
DN50
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
GAS P61-P65-P71-R73A
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
tecnopress series
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
) M
inim
um in
let
gas
pre
ssur
e (m
bar
)
36
Monoblock burners made in die-cast aluminium housing with relative flange to work on heating generators. These burners include the NOVANTA series up to 4100 kW and CINQUECENTO series up to 8000 kW. All burners are built in compliance with the directive 2009/142/CE.These burners, available with Progressive or Modulating operation, are provided with a combustion head “bell shaped” for high performance and low emissions.The electrical servomotor acts both on the butterfly valve and on the air damper; it works through a variable profile cam in order to achieve the best results of combustion. The control panel facia is printed with a mimic diagram complete with lamps to show the sequential stages of the burner operation. Despite to its considerable dimension, this series permit all standard maintenance operations to be carried out by one single person.The new air inlet system with built-in silencer ensures the lowest noise levels.
R91A PR-MDR92A PR-MDR93A PR-MD
R512A PR-MDR515A PR-MDR520A PR-MDR525A PR-MD
GASR91A-R92A-R93A-R512A-R515A-R520A-R525A
Electronic set up (optional)
novanta-cinquecentoseriesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
37
Type Model Overall dimensions* (mm)
A AA B BB C CC D E F G H J K L M N O P Q R S U V W Y Z
min. maxR91A M-.xx.S.IT.A.1.50 1333 242 490 419 843 422 1294 860 434 265 295 329 360 464 M12 417 280 310 295 522 148 374 624 216 649 228 185R91A M-.xx.S.IT.A.1.65 1333 242 490 419 843 422 1391 957 434 265 295 288 360 464 M12 417 280 310 295 551 148 403 750 292 649 228 185R91A M-.xx.S.IT.A.1.80 1333 242 490 419 843 422 1393 959 434 265 295 307 360 464 M12 417 280 310 295 592 148 444 750 322 649 228 185R91A M-.xx.S.IT.A.1.100 1333 242 490 419 843 422 1483 1049 434 265 295 447 360 464 M12 417 280 310 295 672 148 524 824 382 649 228 185R92A M-.xx.S.IT.A.1.50 1333 242 490 419 843 422 1294 860 434 269 299 329 360 464 M12 417 280 310 295 522 148 374 624 216 649 228 185R92A M-.xx.S.IT.A.1.65 1333 242 490 419 843 422 1391 957 434 269 299 288 360 464 M12 417 280 310 295 551 148 403 750 292 649 228 185R92A M-.xx.S.IT.A.1.80 1333 242 490 419 843 422 1393 959 434 269 299 307 360 464 M12 417 280 310 295 592 148 444 750 322 649 228 185R92A M-.xx.S.IT.A.1.100 1333 242 490 419 843 422 1483 1049 434 269 299 447 360 464 M12 417 280 310 295 672 148 524 824 382 649 228 185R93A M-.xx.S.IT.A.1.50 1338 242 495 460 843 422 1294 860 434 304 344 329 360 464 M12 417 280 310 295 522 148 374 624 216 649 228 185R93A M-.xx.S.IT.A.1.65 1338 242 495 460 843 422 1391 957 434 304 344 288 360 464 M12 417 280 310 295 551 148 403 750 292 649 228 185R93A M-.xx.S.IT.A.1.80 1338 242 495 460 843 422 1393 959 434 304 344 307 360 464 M12 417 280 310 295 592 148 444 750 322 649 228 185R93A M-.xx.S.IT.A.1.100 1338 242 495 460 843 422 1483 1049 434 304 344 447 360 464 M12 417 280 310 295 672 148 524 824 382 649 228 185
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW
R91A M-.xx.S.IT.A.1.xxx 480 2.670 230/400V 3N ac 4 2” - DN65 - 80 - 100 R92A M-.xx.S.IT.A.1.xxx 480 3.050 230/400V 3N ac 5.5 2” - DN65 - 80 - 100 R93A M-.xx.S.IT.A.1.xxx 550 4.100 230/400V 3N ac 7.5 2” - DN65 - 80 - 100
(*) Approximate values (regarding model with gas train DN 100)
Type Packaging dimensions* (mm) l p h kg
R91A 1730 1280 1020 250 R92A 1730 1280 1020 260 R93A 1730 1280 1020 300
For the configuration of the gas train, see pages 98-99
(*) Approximate values
Suggested boiler drilling
Burner flange
GAS R91A-R92A-R93A-R512A-R515A-R520A-R525Anovanta-cinquecentoseries
38
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW
R512A M-.xx.S.IT.A.1.xxx 600 4.500 230/400V 3N ac 9.2 2” - DN65 - 80 - 100 R515A M-.xx.S.IT.A.1.xxx 770 5.200 230/400V 3N ac 11 2” - DN65 - 80 - 100 R520A M-.xx.S.IT.A.1.xxx 1.000 6.400 230/400V 3N ac 15 2” - DN65 - 80 - 100 R525A M-.xx.S.IT.A.1.xxx 2.000 8.000 400V 3N ac 18.5 DN65 - 80 - 100
(*) Approximate values (regarding model with gas train DN 100)
Type Packaging dimensions* (mm) l p h kg
R512A 1570 1350 1120 300 R515A 1570 1350 1120 300 R520A 1570 1350 1120 350 R525A 1720 1500 1150 400
For the configuration of the gas train, see pages 98-99
(*) Approximate values
Suggested boiler drilling
Burner flange
GASR91A-R92A-R93A-R512A-R515A-R520A-R525A
Type Model Overall dimensions* (mm)
A AA AD B BB C CC D E F G H J K L M N O P Q R S U V W Y ZR512A M-.xx.S.IT.A.1.50 1475 323 35 530 508 945 446 1714 1071 643 340 380 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270R512A M-.xx.S.IT.A.1.65 1475 323 35 530 508 945 446 1692 1049 643 340 380 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270R512A M-.xx.S.IT.A.1.80 1475 323 35 530 508 945 446 1727 1084 643 340 380 494 540 628 M14 552 390 390 685 150 535 875 322 898 328 270R512A M-.xx.S.IT.A.1.100 1475 323 35 530 508 945 446 1810 1167 643 340 380 494 540 641 M14 552 390 390 792 150 642 942 382 911 328 270R515A M-.xx.S.IT.A.1.50 1475 323 35 530 508 945 446 1714 1071 643 380 420 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270R515A M-.xx.S.IT.A.1.65 1475 323 35 530 508 945 446 1692 1049 643 380 420 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270R515A M-.xx.S.IT.A.1.80 1475 323 35 530 508 945 446 1727 1084 643 380 420 494 540 628 M14 552 390 390 685 150 535 875 322 898 328 270R515A M-.xx.S.IT.A.1.100 1475 323 35 530 508 945 446 1810 1167 643 380 420 494 540 641 M14 552 390 390 792 150 642 942 382 911 328 270R520A M-.xx.S.IT.A.1.50 1475 323 35 530 508 945 446 1714 1071 643 400 440 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270R520A M-.xx.S.IT.A.1.65 1475 323 35 530 508 945 446 1692 1049 643 400 440 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270R520A M-.xx.S.IT.A.1.80 1475 323 35 530 508 945 446 1727 1084 643 400 440 494 540 628 M14 552 390 390 685 150 535 875 322 898 328 270R520A M-.xx.S.IT.A.1.100 1475 323 35 530 508 945 446 1810 1167 643 400 440 494 540 641 M14 552 390 390 792 150 642 942 382 911 328 270R525A M-.xx.S.IT.A.1.50 1475 145 35 530 650 945 571 1714 1071 643 434 484* 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270R525A M-.xx.S.IT.A.1.65 1475 145 35 530 650 945 571 1692 1049 643 434 484* 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270R525A M-.xx.S.IT.A.1.80 1475 145 35 530 650 945 571 1727 1084 643 434 484* 494 540 628 M14 552 390 390 685 150 535 875 322 898 328 270R525A M-.xx.S.IT.A.1.100 1475 145 35 530 650 945 571 1810 1167 643 434 484* 494 540 641 M14 552 390 390 792 150 642 942 382 911 328 270
novanta-cinquecentoseries
39
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CE
Microprocessor-controlled burners (see page 82)
GAS R91A-R92A-R93A-R512A-R515A-R520A-R525A
R91A R92A R93AModel Gas train Operation Code Price € Code Price € Code Price €
M-.PR.S.IT.A.1.50 2” PR 012014853 012015253 012015653M-.PR.S.IT.A.1.65 DN65 PR 012014953 012015353 012015753M-.PR.S.IT.A.1.80 DN80 PR 012015053 012015453 012015853M-.PR.S.IT.A.1.100 DN100 PR 012015153 012015553 012015953M-.MD.S.IT.A.1.50 2” MD(*) 012014854 012015254 012015654M-.MD.S.IT.A.1.65 DN65 MD(*) 012014954 012015354 012015754M-.MD.S.IT.A.1.80 DN80 MD(*) 012015054 012015454 012015854M-.MD.S.IT.A.1.100 DN100 MD(*) 012015154 012015554 012015954
R512A R515AModel Gas train Operation Code Price € Code Price €
M-.PR.S.IT.A.1.50 2” PR 029010153 029010553M-.PR.S.IT.A.1.65 DN65 PR 029010253 029010653M-.PR.S.IT.A.1.80 DN80 PR 029010353 029010753M-.PR.S.IT.A.1.100 DN100 PR 029010453 029010853M-.MD.S.IT.A.1.50 2” MD(*) 029010154 029010554M-.MD.S.IT.A.1.65 DN65 MD(*) 029010254 029010654M-.MD.S.IT.A.1.80 DN80 MD(*) 029010354 029010754M-.MD.S.IT.A.1.100 DN100 MD(*) 029010454 029010854
R520A R525AModel Gas train Operation Code Price € Code Price €
M-.PR.S.IT.A.1.50 2” PR 029010953 -M-.PR.S.IT.A.1.65 DN65 PR 029011053 029011453M-.PR.S.IT.A.1.80 DN80 PR 029011153 029011553M-.PR.S.IT.A.1.100 DN100 PR 029011253 029011653M-.MD.S.IT.A.1.50 2” MD(*) 029010954 -M-.MD.S.IT.A.1.65 DN65 MD(*) 029011054 029011454M-.MD.S.IT.A.1.80 DN80 MD(*) 029011154 029011554M-.MD.S.IT.A.1.100 DN100 MD(*) 029011254 029011654
novanta-cinquecentoseries
40
0
2
4
6
8
10
12
14
16
400 800 1200 1600 2000 2400 2800
0
2
4
6
8
10
12
14
16
400 800 1200 1600 2000 2400 2800 3200
0
2
4
6
8
10
12
14
16
500 1500 2500 3500 45000
2
4
6
8
10
12
14
16
18
20
500 1500 2500 3500 4500
0
2
4
6
8
10
12
14
16
18
20
500 1500 2500 3500 4500 55000
5
10
15
20
500 1500 2500 3500 4500 5500 6500
0
5
10
15
20
25
1500 2500 3500 4500 5500 6500 7500 8500
R512A PR-MD
R520A PR-MDR515A PR-MD
R525A PR-MD
GASR91A-R92A-R93A-R512A-R515A-R520A-R525Anovanta-cinquecentoseries
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
41
0
10
20
30
40
50
60
70
80
90
100
400 800 1200 1600 2000 2400 2800
Rp 2" (50)
DN65
DN80
DN100
0
20
40
60
80
100
120
140
400 800 1200 1600 2000 2400 2800 3200 3600
Rp 2" (50)
DN100
DN80
DN65
0
40
80
120
160
200
500 1500 2500 3500 4500
Rp 2" (50)
DN65
DN80
DN100
0
40
80
120
160
200
500 1500 2500 3500 4500
Rp 2" (50)
DN65
DN80
DN100
0
50
100
150
200
250
300
500 1500 2500 3500 4500 5500
Rp 2" (50)
DN65
DN80
DN100
0
50
100
150
200
250
300
350
400
450
500 1500 2500 3500 4500 5500 6500 7500
Rp 2" (50)
DN65
DN80
DN100
0
50
100
150
200
250
300
350
1500 2500 3500 4500 5500 6500 7500 8500
DN65
DN80
DN100
R512A PR-MD
R520A PR-MDR515A PR-MD
R525A PR-MD
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
GAS R91A-R92A-R93A-R512A-R515A-R520A-R525A
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
novanta-cinquecentoseries
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
) M
inim
um in
let
gas
pre
ssur
e (m
bar
) M
inim
um in
let
gas
pre
ssur
e (m
bar
)
42
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000
R1025 PR-MDR1030_65 PR-MD
R1030 PR-MDR1040 PR-MD
GASR1025-R1030-R1040
Designed and developed by the need to satisfy the most demanding applications in the industrial field, this burner is the biggest among the “monobloc” ranges and is manufactured with an aluminum housing that incorporates a backward curved centrifugal impeller. With a performance ranging from 2550 to 13000 kW, the burner has a 1:3 modulating ratio.A modulating ratio of 1:10 is available upon request by varying the position of the combustion head either electronical ly or manual ly thus changing the geometry of the flame. This is a highly customizable product able to satisfy many different solutions. Upon request these burners are available with a separate floor standing or wall mounting control panel incorporating Inverter control and micro-processor systems, including O2 trim, thus optimizing the combustion. All the models can be provided with silencers or acoustic shroud box. The new system of air inlet with built-in silencer ensures the lowest noise level.The new air inlet system with built-in silencer ensures the lowest noise levels.
Electronic set up (optional)
milleseriesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
43
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW
R1025 M-.xx.S.IT.A.1.xxx 2.550 8.700 400V 3N ac 18.5 DN65 - 80 - 100 R1030 M-.xx.S.IT.A.1.65 2.550 9.500 400V 3N ac 22 DN65 R1030 M-.xx.S.IT.A.1.xxx 2.550 10.600 400V 3N ac 22 DN80 - 100 R1040 M-.xx.S.IT.A.1.xxx 2.550 13.000 400V 3N ac 30 DN80 - 100 - 125
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CEMicroprocessor-controlled burners (see page 82)
For the configuration of the gas train, see pages 98-99
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
R1025/1030 2270 1720 1320 550 R1040 2380 1730 1460 600
(*) Approximate values
Suggested boiler drilling
Burner flange
GAS R1025-R1030-R1040
R1025 R1030 R1040Model Gas train Operation Code Price € Code Price € Code Price €
M-.PR.S.IT.A.1.65 DN65 PR 023011953 023012253 -M-.PR.S.IT.A.1.80 DN80 PR 023012053 023012353 023012553M-.PR.S.IT.A.1.100 DN100 PR 023012153 023012453 023012653M-.PR.S.IT.A.1.125 DN125 PR - 023012753M-.MD.S.IT.A.1.65 DN65 MD(*) 023011954 023012254M-.MD.S.IT.A.1.80 DN80 MD(*) 023012054 023012354 023012554M-.MD.S.IT.A.1.100 DN100 MD(*) 023012154 023012454 023012654M-.MD.S.IT.A.1.125 DN125 MD(*) - - 023012754
Type Model Overall dimensions * (mm)
A AA AD AN AP B BB C CC D E F G H J K L M N O P Q R RR S SS U V W Y Z
R1025 M-.xx.S.IT.A.1.65 1888 377 25 827 118 544 641 1291 680 2121 1299 822 400 450 709 660 816 M16 651 460 460 914 200 265 714 80 1092 292 1146 379 330R1025 M-.xx.S.IT.A.1.80 1888 377 25 841 132 544 641 1291 680 2123 1301 822 400 450 709 660 816 M16 651 460 460 936 200 265 736 80 1092 322 1146 379 330R1025 M-.xx.S.IT.A.1.100 1888 377 25 854 145 544 641 1291 680 2139 1317 822 400 450 709 660 816 M16 651 460 460 842 200 265 642 80 1092 382 1146 379 330R1030 M-.xx.S.IT.A.1.65 1888 377 25 827 118 544 657 1291 680 2121 1299 822 454 504 709 660 816 M16 651 460 460 914 200 265 714 80 1092 292 1146 372 330R1030 M-.xx.S.IT.A.1.80 1888 377 25 841 132 544 657 1291 680 2123 1301 822 454 504 709 660 816 M16 651 460 460 936 200 265 736 80 1092 322 1146 372 330R1030 M-.xx.S.IT.A.1.100 1888 377 25 854 145 544 657 1291 680 2139 1317 822 454 504 709 660 816 M16 651 460 460 842 200 265 642 80 1092 382 1146 372 330R1040 M-.xx.S.IT.A.1.80 1888 377 25 841 132 544 657 1291 680 2123 1301 822 514 564 709 660 816 M16 651 460 460 936 200 265 736 80 1192 322 1146 408 330R1040 M-.xx.S.IT.A.1.100 1888 377 25 854 145 544 657 1291 680 2139 1317 822 514 564 709 660 816 M16 651 460 460 842 200 265 642 80 1192 382 1146 408 330R1040 M-.xx.S.IT.A.1.125 1888 377 25 884 175 544 657 1291 680 2254 1432 822 514 564 709 660 816 M16 651 460 460 954 200 265 754 80 1192 480 1146 408 330
milleseries
44
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 90000
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 110000
5
10
15
20
25
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000
R1040 PR-MD
0
100
200
300
400
2000 3000 4000 5000 6000 7000 8000 9000
DN65
DN80
DN100
0
100
200
300
400
2000 3000 4000 5000 6000 7000 8000 9000 10000
0
50
100
150
200
250
300
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
DN80
DN100
0
50
100
150
200
250
300
350
400
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000
DN100
DN80
R1040
DN125
DN65
Min
ima
pre
ssio
ne
gas
in r
ete
(mb
ar)
Min
ima
pre
ssio
ne
gas
in r
ete
(mb
ar)
GASR1025-R1030-R1040
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
milleseries
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
) M
inim
um in
let
gas
pre
ssur
e (m
bar
)
45
This burners series has been produced to work on bakery and rotary ovens. The customers of this series are commercial kitchens, big hotels and restaurants.They feature the same main characteristics of the standard burners plus the possibility to manually decrease the output up to 40% on light oil burners, and up to 50% on gas burners. On the burner case we have installed an ON/OFF switch and a switch to regulate the output. These burners are equipped with a double protection shield and a blast tube in thermalsteel for high temperature operation.
Type Model Overall dimensions* (mm) Burner flange* (mm)
A B BL C CL D E G K H P min P max M N l p h kg
S5 M-.TN.x.IT.B.0.15 320 0÷80 0÷180 400 500 310 230 80 190 90 85 134 M8 155,5 360 300 560 16,8 S10 M-.TN.x.IT.B.0.20 350 180 275 530 625 340 255 113 210 125 105 134 M8 169,7 420 340 620 22 S18 M-.TN.x.IT.B.0.25 350 205 300 555 650 340 255 126 210 132 105 134 M8 169,7 420 340 620 24 Chef S5 M-.TN.S.IT.D.0.15 320 0÷80 0÷180 400 500 310 230 80 190 90 85 134 M8 155,5 360 300 560 16,8(*) Approximate values
In compliance with DIRECTIVE 2009/142/CE
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW Rp
Tecnopan S5 M-.TN.x.IT.B.0.15 35 70 230V 1N ac 0.10 1⁄2” Tecnopan S10 M-.TN.x.IT.B.0.20 65 120 230V 1N ac 0.15 3⁄4” Tecnopan S18 M-.TN.x.IT.B.0.25 80 200 230V 1N ac 0.15 1” Chef S5 M.TN.S.IT.D.0.15 35 70 230V 1N ac 0.10 1⁄2”
Suggested boiler drilling
For the configuration of the gas train, see pages 98-99
Packaging dimensions* (mm)
GAS tecnopan S5-S10-S18-chef S5BURNERS FOR KITCHENS AND BAKERY OVENS
S5 S10 S18Model Gas train Operation Code Price € Code Price € Code Price €
M-.TN.S.IT.B.0.15 ½” TN 001010341 - -M-.TN.L.IT.B.0.15 ½” TN 001010441 - -M-.TN.S.IT.B.0.20 ¾” TN - 002010541 -M-.TN.L.IT.B.0.20 ¾” TN - 002010641 -M-.TN.S.IT.B.0.25 1” TN - - 002010741M-.TN.L.IT.B.0.25 1” TN - - 002010841M-.TN.S.IT.D.0.15 (Chef) ½” TN 001010641 - -
TECHNICAL DETAILS
minif lam series
46
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
GAStecnopan S5-S10-S18-chef S5
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
minif lam series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
47
49
The basis of true progress is the distribution of the advantages it brings, among which improved living standards and the protection of the environment are most certainly included. Well-aware of the vital role it plays in the development of ecologically compatible products and vaunting over thirty years of experience in the design and manufacture of burners for civil and industrial use, CIB UNIGAS S.p.A. ranks among the European leaders in its sector.Continuous investments in the perfection of technologically advanced products at the company’s modern research laboratory have created the conditions necessary for the creation of special burners suited to applications that demand the lowest NOx emissions.These burners homologated with the CE Mark (Gas Appliances Directive) by one of the most authoritative european certification agencies in the sector (GASTEC) are used in our entire range of product, starting from our burners for civil applications (27 kW) up to our industrial application burners (15 MW).Working closely with our Research & Development Department, our technicians specialised and dedicated to the implementation of these products, have capitalised on the experience accumulated over the years in the field of standard burners (with normal emission) in order to create a parallel range of low environmental impact burners.In addition to scrupulously respecting the limits prescribed by European directives regulating pollutant emission, all these models guarantee values amply below those established by regulations and vaunt emissions of less than 80 mg/kWh.Our low NOx burners benefit from the installation of an innovative combustion head that re-distributes the gaseous element according to different weights and in a negative pressure zone, in this way letting a part of the combusted gases circulate freely inside.The applications in which these values are required vary widely, such as in the systems provided for cultivation in greenhouses, for example.
The use of special combustion heads permits the use of flue gas for the injection of the CO2 required for the growth of plants into
the greenhouses without the risk of the CO emissions that are so dangerous for the personnel working inside.Our burners can be equipped with the most modern automatic mechanical or electronic modulation systems
that maintain the correct gas/air ratio.In this way, the burner’s thermal load is adapted with
precision to the need for heat in every moment of operation in order to guarantee optimised throughput at every point in combustion.The electronic modulation system makes the fullest
use of the fuel/combustion air curve, which proves to be more extended than the curve provided by
mechanical modulation, in this way making the electronic system both faster
and more punctual and optimising the adjustment phase.In addition, thanks to the presence of the microprocessor that controls the various phases of the process, the most absolute precision is ensured in the repetition of the operational sequences.The reliability of this product has been proven through close work with some of the leading European boiler manufacturers, while the company’s remarkable versatility permits the widest and most complete offer of low pollutant emission burners for the satisfaction of the most particular and specific requests from the clientele.Precisely due to the particularity of the applications for which they have been designed, low Nox burners require specific technical skills and experience that CIB UNIGAS S.p.A. is happy to supply thanks to its technical assistance organisation that operates around the world and is regularly re-trained during courses held at the company’s headquarters.Far from representing mere compliance to the latest standards and regulations or the exclusive consequence of marketing logic, these results have been achieved as part of our mission to improve standards of living because we believe our natural environment to be much more than just an abstract concept and more precisely, the home to our present and future.
CIB UNIGAS and its mission:Natural gas low NOx burners
50
(from 27 to 41 kW)
(from 40 to 65 kW)
(from 21 to 65 kW)
(from 75 to 120 kW)
(from 35 to 120 kW)
(from 85 to 150 kW)
(from 40 to 150 kW)
(from 93 to 190 kW)
(from 60 to 190 kW)
(from 65 to 260 kW)
(from 90 to 350 kW)
(from 132 to 490 kW)
RX515-HRX515
RX510-HRX512
RX520-HRX520
RX1025-HRX1025
RX1030-HRX1030
RX1030-HRX1030
(from 165 to 540 kW)
(from 165 to 720 kW)
(from 270 to 970 kW)
(from 241 to 1.040 kW)
(from 288 to 1.480 kW)
(from 674 to 2.008 kW)
(fro
RX90
RX91
idea seriesNGX35 - TNNGX70 - TN/ABNGX120 - TN/ABNGX200 - TN/AB/PR/MD
NGX280 - TN/ABNGX350 - PR/MDNGX400 - PR/MDNGX550 - PR/MD
tecnopress seriesLX60 - AB/PR/MDLX65 - AB/PR/MDLX72 - AB/PR/MD
l o w N O x g a s b u r n e r s
For outputs above 15 MW contact the producer
Type
51
om 800 to 3.250 kW)
(from 770 to 4.400 kW)
(from 1.000 to 5.800 kW)
(from 1.000 to 8.600 kW)
(from 2.550 to 10.600 kW)
(from 2.550 to 9.500 kW)
novanta - cinquecento seriesRX90 - PR/MDRX91 - PR/MDRX510 - PR/MDRX515 - PR/MDRX520 - PR/MD
HRX512 - PR/MDHRX515 - PR/MDHRX520 - PR/MD
mille seriesRX1025 - PR/MDRX1030 - PR/MDHRX1025 - PR/MDHRX1030 - PR/MD
52
0
0,5
1
1,5
2
2,5
3
10 20 30 40 50 60 70 80
NGX35 TNNGX70 TNNGX70 AB
In its market actions priorities, CIB UNIGAS pays continuous attention to the development of products that can perform the lowest flue gas emissions.Particular attention is reserved to civil application burners for domestic heating systems and sanitary water production with outputs up to 65 kW. The 35 and 70 IDEA series performs these applications properly, strictly observing the regulations about emissions reduction, thanks to the new combustion head designed to match both the pressurised and flame reversal boilers.
LOW NOx BURNERS
GASNGX35-NGX70low NOx series
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
53
TECHNICAL DETAILS
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
NGX35 290 260 490 10 NGX70 400 300 520 14
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW Rp
NGX35 M-.TN.x.IT.A.0.xx 27 41 230V 1N ac 0.075 ½” NGX70 M-.TN.x.IT.A.0.xx 40 65 230V 1N ac 0.1 ½” - ¾” NGX70 M-.AB.x.IT.A.0.xx 21 65 230V 1N ac 0.1 ½” - ¾”
For the configuration of the gas train, see pages 98-99
(*) Approximate values
Boilerdrilling* (mm)
Burnerflange* (mm)
◆ Burner equipped with external air inlet.In compliance with DIRECTIVE 2009/142/CE
Suggested boiler drilling
Burner flange
GAS NGX35-NGX70
NGX 35 NGX 70Model Gas train Operation Code Price € Code Price €
M-.TN.S.IT.A.0.10 ½” TN 024010541M-.TN.L.IT.A.0.10 ½” TN 024010641M-.TN.S.IT.A.0.15 ½” TN 024011441 025012141M-.TN.L.IT.A.0.15 ½” TN 024011541 025012241M-.TN.S.IT.Z.0.10 ◆ ½” TN 024010741 -M-.TN.L.IT.Z.0.10 ◆ ½” TN 024010841 -M-.TN.S.IT.Z.0.15 ◆ ½” TN 024011641 -M-.TN.L.IT.Z.0.15 ◆ ½” TN 024011741 -M-.TN.S.IT.A.0.20 ¾” TN - 025012341M-.TN.L.IT.A.0.20 ¾” TN - 025012441M-.AB.S.IT.A.0.15 ½” AB - 025012142M-.AB.L.IT.A.0.15 ½” AB - 025012242M-.AB.S.IT.A.0.20 ¾” AB - 025012342M-.AB.L.IT.A.0.20 ¾” AB - 025012442
Type Model Overall dimensions* (mm)
A B C D E F G J L Q R S T W X H M N P K O min max min max min max min max min max
NGX35 M-.TN.S.IT.A.0.xx 338 58 98 240 280 269 14 255 80 86 194 257 297 89 129 168 7 400 266 95 M8 153 108 145 96 120 NGX35 M-.TN.L.IT.A.0.xx 418 58 178 240 360 269 14 255 80 86 194 257 417 89 209 168 7 400 266 95 M8 153 108 145 96 120 NGX70 M-.xx.S.IT.A.0.xx 393 76 299 304 14 291 80 99 218 296 130 168 7 438 291 95 M8 153 108 145 96 120 NGX70 M-.xx.L.IT.A.0.xx 461 76 149 294 377 304 14 291 80 99 218 292 375 125 208 168 7 438 291 95 M8 153 108 145 96 120
low NOx series
54
4
6
8
10
12
14
25 30 35 40 45 50
Rp 1/2" (15)
Rp 1/2" (10)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
GASNGX35-NGX70
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
low NOx series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
55
0
1
2
3
4
5
6
20 40 60 80 100 120 140 160 180
NGX120 TN
NGX200 TNNGX120 AB
NGX200 AB
The recent european provisions about respect for environment have speed up the development of burners observing these regulations. Our R&D Dept. has developed the IDEA series for this purpose.These burners can be installed on pressurised boilers up to 150 kW and are easy to use thanks to the mechanical and electronic components arrangement, assuring easier maintenance, optimised efficiency and air/fuel mixing. All these features are achieved thanks to the new combustion head that allows a balanced comburent air flow in order to let the flame progressively and harmoniously light up along the combustion chamber.
GAS NGX120-NGX200LOW NOx BURNERS
low NOx seriesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
56
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CE
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
NGX120..S 600 370 400 24 NGX120..L 750 370 400 25 NGX200..S 600 370 400 24 NGX200..L 750 370 400 25
(*) Approximate values
Boilerdrilling* (mm)
Burnerflange* (mm)
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW Rp
NGX120 M-.TN.x.IT.A.0.20 75 120 230V 1N ac 0.18 3⁄4” NGX120 M-.AB.x.IT.A.0.20 35 120 230V 1N ac 0.18 3⁄4” NGX200 M-.TN.x.IT.A.0.xx 85 150 230V 1N ac 0.18 3⁄4” - 1” NGX200 M-.xx.x.IT.A.0.xx 40 150 230V 1N ac 0.18 3⁄4” - 1”
TECHNICAL DETAILS
For the configuration of the gas train, see pages 98-99
Suggested boiler drilling
Burner flange
GASNGX120-NGX200
NGX120 NGX200Model Gas train Operation Code Price € Code Price €
M-.TN.S.IT.A.0.20 ¾” TN 026011341 026011741
M-.TN.L.IT.A.0.20 ¾” TN 026011441 026011841
M-.TN.S.IT.A.0.25 1” TN 026011941M-.TN.L.IT.A.0.25 1” TN 026012041M-.AB.S.IT.A.0.20 ¾” AB 026011342 026011742M-.AB.L.IT.A.0.20 ¾” AB 026011442 026011842M-.AB.S.IT.A.0.25 1” AB 026011942M-.AB.L.IT.A.0.25 1” AB 026012042M-.PR.S.IT.A.0.25 1” PR 026011943M-.PR.L.IT.A.0.25 1” PR 026012043M-.MD.S.IT.A.0.25 1” MD(*) 026011944M-.MD.L.IT.A.0.25 1” MD(*) 026012044
Type Model Overall dimensions* (mm)
A B C D G J L Q R S T W X H M N P K O min max min max min max min max min max
NGX120 M-.xx.S.IT.A.0.20 581 85 170 390 475 373 108 158 245 421 506 201 286 220 32 560 340 128 M8 188 133 188 108 158 NGX120 M-.xx.L.IT.A.0.20 681 85 270 390 575 373 108 158 245 421 506 201 286 220 32 560 340 128 M8 188 133 188 108 158 NGX200 M-.xx.S.IT.A.0.25 581 85 170 390 475 373 115 158 245 421 506 201 286 220 32 560 340 134 M8 188 133 188 108 158 NGX200 M-.xx.L.IT.A.0.25 681 85 270 390 575 373 115 158 245 421 506 201 286 220 32 560 340 134 M8 188 133 188 108 158
low NOx series
57
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
GAS NGX120-NGX200
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
low NOx series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
58
0
1
2
3
4
5
6
7
8
9
50 150 250 350 450 550
NGX280 TNNGX280 AB
NGX 350 PR-MDNGX400 PR-MDNGX550 PR-MD
As far as pressurised and flame reverse boilers, output up 490 kW, the new IDEA series NGX burners are designed in order to get emission values under the 80 mg/kWh NOx emission limit.The correct mixing of air and fuel is achieved thanks to the simple and efficient combustion head adjusting system, assuring the very low nitric oxide levels stated by law. By mantaining a right combustion ratio, the flame can be optimised for all the combustion chamber length. Some of this series burner components, as the noiseinsulating air inlet, the ABS cover and the burner synoptic panel make this product range advanced in the low polluting emissions burners market.
LOW NOx BURNERS
GASNGX280-NGX350-NGX400-NGX550low NOx series
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
59
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW Rp
NGX280 M-.TN.x.IT.A.0.xx 93 190 230V 1N ac 0.25 1”- 1”1⁄4 - 1”1⁄2 NGX280 M-.AB.x.IT.A.0.xx 60 190 230V 1N ac 0.25 1”- 1”1⁄4 - 1”1⁄2 NGX350 M-.xx.x.IT.A.0.xx 65 260 230V 1N ac 0.37 1” - 1”1⁄4 - 1”1⁄2 NGX400 M-.xx.x.IT.A.0.xx 90 350 230V 1N ac 0.45 1”- 1”1⁄4 - 1”1⁄2 - 2” NGX550 M-.xx.x.IT.A.0.xx 132 490 230V 1N ac 0.62 1”1⁄4 - 1”1⁄2 - 2”For the configuration of the gas train, see pages 98-99
(*) Approximate values
TECHNICAL DETAILS
Suggested boiler drilling
Burner flange
GAS NGX280-NGX350-NGX400-NGX550
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
NGX280/350/400 1120 440 580 42 NGX550 1200 460 630 55
Type Model Overall dimensions* (mm)
A BC D E F G H J
KL M N
OP Q R S T W X Y
stand. exten. stand. exten. 1 2 min.max.NGX280 M-.xx.x.IT.A.0.25/32 754 899 163 308 570 596 200 396 113 164 348 215 223 - M10 219 131 179 155 541 366 175 128 508 491 144NGX280 M-.xx.x.IT.A.0.40 754 899 163 308 570 726 330 396 113 164 348 215 223 - M10 219 131 179 155 541 366 175 128 517 491 144NGX350 M-.xx.x.IT.A.0.25/32 778 908 178 308 570 596 200 396 131 164 348 215 223 - M10 219 131 179 155 541 366 175 89 508 491 144NGX350 M-.xx.x.IT.A.0.40 778 908 178 308 570 726 330 396 131 164 348 215 223 - M10 219 131 179 155 541 366 175 89 517 491 144NGX400 M-.xx.x.IT.A.0.25/32 798 928 198 328 570 596 200 396 148 168 348 215 223 - M10 219 131 179 155 541 366 175 89 508 491 144NGX400 M-.xx.x.IT.A.0.40 798 928 198 328 570 726 330 396 148 168 348 215 223 - M10 219 131 179 155 541 366 175 89 517 491 144NGX400 M-.xx.x.IT.A.0.50 798 928 198 328 570 726 330 396 148 168 348 215 223 - M10 219 131 179 155 541 366 175 89 567 491 144NGX550 M-.xx.x.IT.A.0.32 874 974 253 353 590 671 245 426 168 198 384 241 241 384 M10 247 157 192 174 552 377 175 69 543 533 155NGX550 M-.xx.x.IT.A.0.40 874 974 253 353 590 744 318 426 168 198 384 241 241 384 M10 247 157 192 174 552 377 175 69 553 533 155NGX550 M-.xx.x.IT.A.0.50 874 974 253 353 590 744 318 426 168 198 384 241 241 384 M10 247 157 192 174 552 377 175 69 603 533 155
low NOx series
60
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CEMicroprocessor-controlled burners (see page 82)
GASNGX280-NGX350-NGX400-NGX550
NGX280 NGX350Model Gas train Operation Code Price € Code Price €
M-.TN.S.IT.A.0.25 1” TN 027012341 -
M-.TN.L.IT.A.0.25 1” TN 027012441 -
M-.TN.S.IT.A.0.32 1”¼ TN 027012541 -M-.TN.L.IT.A.0.32 1”¼ TN 027012641 -M-.TN.S.IT.A.0.40 1”½ TN 027012741 -M-.TN.L.IT.A.0.40 1”½ TN 027012841 -M-.AB.S.IT.A.0.25 1” AB 027012342 -M-.AB.L.IT.A.0.25 1” AB 027012442 -M-.AB.S.IT.A.0.32 1”¼ AB 027012542 -M-.AB.L.IT.A.0.32 1”¼ AB 027012642 -M-.AB.S.IT.A.0.40 1”½ AB 027012742 -M-.AB.L.IT.A.0.40 1”½ AB 027012842 -M-.PR.M.IT.A.0.25 1” PR 027010843M-.PR.M.IT.A.0.32 1”¼ PR 027010943M-.PR.M.IT.A.0.40 1”½ PR 027011043M-.MD.M.IT.A.0.25 1” MD(*) 027010844M-.MD.M.IT.A.0.32 1”¼ MD(*) 027010944M-.MD.M.IT.A.0.40 1”½ MD(*) 027011044
NGX400 NGX550Model Gas train Operation Code Price € Code Price €
M-.PR.M.IT.A.0.25 1” PR 027011143 -
M-.PR.M.IT.A.0.32 1”¼ PR 027011243 -
M-.PR.M.IT.A.0.40 1”½ PR 027011343 -M-.PR.M.IT.A.0.50 2” PR 027011543 -M-.PR.S.IT.A.0.32 1”¼ PR - 028010943M-.PR.L.IT.A.0.32 1”¼ PR - 028011043M-.PR.S.IT.A.0.40 1”½ PR - 028011143M-.PR.L.IT.A.0.40 1”½ PR - 028011243M-.PR.S.IT.A.0.50 2” PR - 028011343M-.PR.L.IT.A.0.50 2” PR - 028011443M-.MD.M.IT.A.0.25 1” MD(*) 027011144 -M-.MD.M.IT.A.0.32 1”¼ MD(*) 027011244 -M-.MD.M.IT.A.0.40 1”½ MD(*) 027011344 -M-.MD.M.IT.A.0.50 2” MD(*) 027011544 -M-.MD.S.IT.A.0.32 1”¼ MD(*) - 028010944M-.MD.L.IT.A.0.32 1”¼ MD(*) - 028011044M-.MD.S.IT.A.0.40 1”½ MD(*) - 028011144M-.MD.L.IT.A.0.40 1”½ MD(*) - 028011244M-.MD.S.IT.A.0.50 2” MD(*) - 028011344M-.MD.L.IT.A.0.50 2” MD(*) - 028011444
low NOx series
61
GAS NGX280-NGX350-NGX400-NGX550low NOx series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
62
Rp 1”1/2 (40)
Rp 1”1/2 (40)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
GASNGX280-NGX350-NGX400-NGX550
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
low NOx series
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
63
1
3
5
7
9
11
0
2
4
6
8
10
100 200 300 400 500 600 700 800 900 1000 1100 1200
LX60 AB-PR-MDLX65 AB-PR-MDLX72 AB-PR-MD
The low NOx TECNOPRESS series represents the average output range. This series is the result of the CIB UNIGAS great experience in projects involving outputs up to 1040 kW, and is characterised for simple mechanical or electronic adjusting procedure and simple maintenance, thanks to the optimised components positiong.The combustion head is designed in order to reduce the polluting emissions to the minimum. It is very simple to adjust and provided with a graduated index that shows its position. The synopitc panel is provided with signalling LEDs showing each operating stage of the burner, in order to make the operator surveying easier.
GAS LX60-LX65-LX72LOW NOx BURNERS
low NOx seriesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
64
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW
LX60 M-.xx.x.IT.A.0.xx 165 720 230/400V 3N ac 1.1 1”1/2 - 2” - DN65 LX65 M-.xx.x.IT.A.0.xx 270 970 230/400V 3N ac 1.5 1”1/2 - 2” - DN65 LX72 M-.xx.x.IT.A.0.xx 241 1.040 230/400V 3N ac 2.2 2” - DN65 - 80
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
LX60 1200 670 540 60 LX65 1280 850 760 100 LX72 1280 850 760 110
(*) Approximate values
For the configuration of the gas train, see pages 98-99
LX65 - LX72LX60
Suggested boiler drilling
Burner flangeSuggested
boiler drillingBurner flange
GASLX60-LX65-LX72
Type Model Overall dimensions* (mm)
AS AL AA BS BL BB C CC D E F G H J K L M N O P Q R S U V W Y Z
min. maxLX60 M-.xx.x.IT.A.0.40 1026 1206 99 252 432 314 736 298 812 500 312 185 204 210 240 344 M10 269 190 190 190 439 112 327 444 - 464 162 120LX60 M-.xx.x.IT.A.0.50 1026 1206 99 252 432 314 736 298 812 500 312 185 204 210 240 344 M10 269 190 190 190 447 112 335 444 - 464 162 120LX60 M-.xx.x.IT.A.0.65 1026 1206 99 252 432 314 736 298 997 685 312 185 204 250 240 420 M10 269 190 190 190 515 112 403 540 313 540 162 120LX65 M-.xx.x.IT.A.0.40 1129 1219 130 326 416 373 803 316 900 568 332 195 228 208 300 376 M10 330 216 250 233 457 130 327 519 - 531 198 155LX65 M-.xx.x.IT.A.0.50 1166 1256 130 326 416 373 803 316 900 568 332 185 228 208 300 376 M10 330 216 250 233 465 130 335 519 - 531 162 155LX65 M-.xx.x.IT.A.0.65 1166 1256 130 326 416 373 803 316 998 666 332 185 228 275 300 393 M10 330 216 250 233 533 130 403 565 313 548 162 155LX72 M-.xx.x.IT.A.1.50 1139 1224 130 300 385 373 803 316 1104 772 332 219 249 275 300 393 M10 330 216 250 233 533 130 403 565 313 548 198 155LX72 M-.xx.x.IT.A.1.65 1139 1224 130 300 385 373 803 316 1106 774 332 219 249 275 300 407 M10 330 216 250 233 574 130 444 565 344 562 198 155LX72 M-.xx.x.IT.A.1.80 1139 1224 130 300 385 373 803 316 1106 774 332 219 249 275 300 407 M10 330 216 250 233 574 130 444 565 344 562 198 155
low NOx series
65
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CEMicroprocessor-controlled burners (see page 82)
GAS LX60-LX65-LX72
LX60 LX65 LX72Model Gas train Operation Code Price € Code Price € Code Price €
M-.AB.S.IT.A.0.40 1”½ AB 004012442 008015142 -M-.AB.L.IT.A.0.40 1”½ AB 004012542 008015242 -M-.AB.S.IT.A.0.50 2” AB 004012642 008012442 008012842M-.AB.L.IT.A.0.50 2” AB 004012742 008012542 008012942M-.AB.S.IT.A.0.65 DN65 AB 004012842 008012642 008013042M-.AB.L.IT.A.0.65 DN65 AB 004012942 008012742 008013142M-.AB.S.IT.A.0.80 DN80 AB - - 008013242M-.AB.L.IT.A.0.80 DN80 AB - - 008013342M-.PR.S.IT.A.0.40 1”½ PR 004012443 008015143 -M-.PR.L.IT.A.0.40 1”½ PR 004012543 008015243 -M-.PR.S.IT.A.0.50 2” PR 004012643 008012443 008012843M-.PR.L.IT.A.0.50 2” PR 004012743 008012543 008012943M-.PR.S.IT.A.0.65 DN65 PR 004012843 008012643 008013043M-.PR.L.IT.A.0.65 DN65 PR 004012943 008012743 008013143M-.PR.S.IT.A.0.80 DN80 PR - - 008013243M-.PR.L.IT.A.0.80 DN80 PR - - 008013343M-.MD.S.IT.A.0.40 1”½ MD(*) 004012444 008015144 -M-.MD.L.IT.A.0.40 1”½ MD(*) 004012544 008015244 -M-.MD.S.IT.A.0.50 2” MD(*) 004012644 008012444 008012844M-.MD.L.IT.A.0.50 2” MD(*) 004012744 008012544 008012944M-.MD.S.IT.A.0.65 DN65 MD(*) 004012844 008012644 008013044M-.MD.L.IT.A.0.65 DN65 MD(*) 004012944 008012744 008013144M-.MD.S.IT.A.0.80 DN80 MD(*) - - 008013244M-.MD.L.IT.A.0.80 DN80 MD(*) - - 008013344
low NOx series
66
Rp 1” 1/2 (40)
Rp 2” (50)
DN65
Rp 1” 1/2 (40)
Rp 2” (50)
DN65
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
) 50
60
GASLX60-LX65-LX72
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
low NOx series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
67
0
2
4
6
8
10
12
14
16
18
20
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
RX90 PR-MDRX91 PR-MD
RX510 PR-MDRX515 PR-MDRX520 PR-MD
GAS RX90-RX91-RX510-RX515-RX520LOW NOx BURNERS
The NOVANTA-CINQUECENTO series is designed for industrial boilers up to 5.8 MW, and represent the best evolution in the technology development for the nitric oxide low emissions (<80 mg/kWh). This series is designed for either mechanical or electronic combustion control with or without inverter, with or without oxygen trim control. It assures reliability and efficiency.The electronic version preforms communication via BUS. Thanks to the balanced air/gas ratio distribution, the extreme flexibility of the new combustion head allows a homogeneous flame along the combustion chamber axis to form.The burner is made of die-casting aluminium body on which all mechanical and electronic regulating components are mounted. The synoptic control panel shows the operating stages. As far as CINQUECENTO series, the new-designed air inlet allows the lowest noise levels in the market.The new air inlet system with built-in silencer ensures the lowest noise levels.
low NOx seriesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
68
(*) Approximate values
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW
RX90 M-.xx.S.IT.A.1.xxx 288 1.480 230/400V 3N ac 3 2” - DN65 - 80 - 100 RX91 M-.xx.S.IT.A.1.xxx 674 2.008 230/400V 3N ac 4 2” - DN65 - 80 - 100
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
RX90 1730 1280 1020 230 RX91 1730 1280 1020 280
For the configuration of the gas train, see pages 98-99
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CEMicroprocessor-controlled burners (see page 82)
TECHNICAL DETAILS
GASRX90-RX91-RX510-RX515-RX520
Suggested boiler drilling
Burner flange
RX90 RX91Model Gas train Operation Code Price € Code Price €
M-.PR.S.IT.A.1.50 2” PR 012016053 012016453
M-.PR.S.IT.A.1.65 DN65 PR 012016153 012016553
M-.PR.S.IT.A.1.80 DN80 PR 012016253 012016653M-.PR.S.IT.A.1.100 DN100 PR 012016353 012016753M-.MD.S.IT.A.1.50 2” MD(*) 012016054 012016454M-.MD.S.IT.A.1.65 DN65 MD(*) 012016154 012016554M-.MD.S.IT.A.1.80 DN80 MD(*) 012016254 012016654M-.MD.S.IT.A.1.100 DN100 MD(*) 012016354 012016754
Type Model Overall dimensions* (mm)
A AA AD AN AP B BB C CC D E F G H J K L M N O P Q R S U V W Y Z
min maxRX90 M-.xx.S.IT.A.1.50 1168 242 35 429 100 290 419 843 422 1294 860 434 228 258 329 360 464 M12 417 280 310 295 522 148 374 624 216 649 228 185RX90 M-.xx.S.IT.A.1.65 1168 242 35 406 118 290 419 843 422 1391 957 434 228 258 288 360 464 M12 417 280 310 295 551 148 403 750 292 649 228 185RX90 M-.xx.S.IT.A.1.80 1168 242 35 439 132 290 419 843 422 1393 959 434 228 258 307 360 464 M12 417 280 310 295 592 148 444 750 322 649 228 185RX90 M-.xx.S.IT.A.1.100 1168 242 35 592 145 290 419 843 422 1483 1049 434 228 258 447 360 464 M12 417 280 310 295 672 148 524 824 382 649 228 185RX91 M-.xx.S.IT.A.1.50 1168 242 35 429 100 290 419 843 422 1294 860 434 273 303 329 360 464 M12 417 280 310 295 522 148 374 624 216 649 228 185RX91 M-.xx.S.IT.A.1.65 1168 242 35 406 118 290 419 843 422 1391 957 434 273 303 288 360 464 M12 417 280 310 295 551 148 403 750 292 649 228 185RX91 M-.xx.S.IT.A.1.80 1168 242 35 439 132 290 419 843 422 1393 959 434 273 303 307 360 464 M12 417 280 310 295 592 148 444 750 322 649 228 185RX91 M-.xx.S.IT.A.1.100 1168 242 35 592 145 290 419 843 422 1483 1049 434 273 303 447 360 464 M12 417 280 310 295 672 148 524 824 382 649 228 185
low NOx series
69
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CEMicroprocessor-controlled burners (see page 82)
For the configuration of the gas train, see pages 98-99
Type Model Power kW Electric power Fan motor Gas connections min. max. supply kW
RX510 M-.xx.S.IT.A.1.xxx 800 3.250 230/400V 3N ac 7.5 2” - DN65 - 80 - 100 RX515 M-.xx.S.IT.A.1.xxx 770 4.400 230/400V 3N ac 11 2” - DN65 - 80 - 100 RX520 M-.xx.S.IT.A.1.xxx 1.000 5.800 230/400V 3N ac 15 2” - DN65 - 80 - 100
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
RX510 1570 1350 1120 300 RX515 1720 1500 1150 320 RX520 1720 1500 1150 370
(*) Approximate values
Type Packaging dimensions* (mm) l p h kgh
RX510 1570 1350 1120 300
Suggested boiler drilling Burner flange
GAS RX90-RX91-RX510-RX515-RX520
TECHNICAL DETAILS
Type Model Overall dimensions* (mm)
A AA AD B BB C CC D E F G H J K L M N O P Q R S U V W Y ZRX510 M-.xx.S.IT.A.1.50 1359 323 35 400 468 924 446 1714 1071 643 318 350 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270RX510 M-.xx.S.IT.A.1.65 1359 323 35 400 468 924 446 1692 1049 643 318 350 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270RX510 M-.xx.S.IT.A.1.80 1359 323 35 400 468 924 446 1727 1084 643 318 350 494 540 626 M14 552 390 390 685 150 535 875 322 896 328 270RX510 M-.xx.S.IT.A.1.100 1359 323 35 400 468 924 446 1810 1167 643 318 350 494 540 641 M14 552 390 390 792 150 642 942 382 911 328 270RX515 M-.xx.S.IT.A.1.50 1514 323 35 530 508 924 446 1714 1071 643 305 345 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270RX515 M-.xx.S.IT.A.1.65 1514 323 35 530 508 924 446 1692 1049 643 305 345 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270RX515 M-.xx.S.IT.A.1.80 1514 323 35 530 508 924 446 1727 1084 643 305 345 494 540 626 M14 552 390 390 685 150 535 875 322 896 328 270RX515 M-.xx.S.IT.A.1.100 1514 323 35 530 508 924 446 1810 1167 643 305 345 494 540 641 M14 552 390 390 792 150 642 942 382 772 328 270RX520 M-.xx.S.IT.A.1.50 1514 323 35 530 508 924 446 1714 1071 643 340 372 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270RX520 M-.xx.S.IT.A.1.65 1514 323 35 530 508 924 446 1692 1049 643 340 372 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270RX520 M-.xx.S.IT.A.1.80 1514 323 35 530 508 924 446 1727 1084 643 340 372 494 540 626 M14 552 390 390 685 150 535 875 322 896 328 270RX520 M-.xx.S.IT.A.1.100 1514 323 35 530 508 924 446 1810 1167 643 340 372 494 540 641 M14 552 390 390 792 150 642 942 382 772 328 270
RX510 RX515 RX520Model Gas train Operation Code Price € Code Price € Code Price €
M-.PR.S.IT.A.1.50 2” PR 029011753 029012153 029012553M-.PR.S.IT.A.1.65 DN65 PR 029011853 029012253 029012653M-.PR.S.IT.A.1.80 DN80 PR 029011953 029012353 029012753M-.PR.S.IT.A.1.100 DN100 PR 029012053 029012453 029012853M-.MD.S.IT.A.1.50 2” MD(*) 029011754 029012154 029012554M-.MD.S.IT.A.1.65 DN65 MD(*) 029011854 029012254 029012654M-.MD.S.IT.A.1.80 DN80 MD(*) 029011954 029012354 029012754M-.MD.S.IT.A.1.100 DN100 MD(*) 029012054 029012454 029012854
low NOx series
70
0
2
4
6
8
10
12
14
16
18
20
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
RX520 PR-MD
0
2
4
6
8
10
12
14
16
18
20
0 500 1000 1500 2000 2500 3000 3500 4000 4500
RX515 PR-MD
GASRX90-RX91-RX510-RX515-RX520low NOx series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
71
0
40
80
120
160
200
240
500 1000 1500 2000 2500 3000 3500 4000 4500 5000
DN65
DN80
Rp 2" (50)
DN100
RX515 PR-MD
0
100
200
300
400
500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500
DN65
DN80
Rp 2" (50)
DN100
RX520 PR-MD
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
GAS RX90-RX91-RX510-RX515-RX520
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
low NOx series
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
72
GAS/LIGHT OILHRX512-HRX515-HRX520LOW NOx BURNERS
GG
Available in both progressive or modulating operation, the dual fuel gas/light oil series CINQUECENTO, represents the culmination of our experience in the combustion field in the medium to high output. As for all the other models that use two fuels, they combine perfectly the requirements for gas firing with those necessary for the liquid fuels. These burners are provided with an independent electric motor for the operation of the light oil pump. During gas firing, the pump motor does not operate and remains off. When firing gas, these burners are equipped with a combustion head to give a high irradiating flame, when working with light oil they are equipped with a by pass nozzle that by means of a pressure regulating valve in the return line gives a turndown ratio of 1:3. The burner mounted control panel contains all of the burner management system and gives visual indication of the firing sequence and possible faults. The flame protection system is by means of a UV photocell. This new series of burners integrates the well known performance and reliability characteristics and has the new air inlet system with built-in silencer and the new combustion head that is particularly Eco friendly (<80 mg/kWh).
Electronic set up (optional)
0
2
4
6
8
10
12
14
16
18
20
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
HRX520 PR-MDHRX515 PR-MDHRX512 PR-MD
low NOx seriesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
73
GAS/LIGHT OIL HRX512-HRX515-HRX520LL
Type Model Overall dimensions* (mm)
A AA AD B BB C CC D E F G H J K L M N O P Q R S U V W Y ZHRX512 MG.xx.S.IT.A.1.50 1359 323 35 400 468 924 446 1714 1071 643 305 345 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270HRX512 MG.xx.S.IT.A.1.65 1359 323 35 400 468 924 446 1692 1049 643 305 345 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270HRX512 MG.xx.S.IT.A.1.80 1359 323 35 400 468 924 446 1727 1084 643 305 345 494 540 626 M14 552 390 390 685 150 535 875 322 896 328 270HRX512 MG.xx.S.IT.A.1.100 1359 323 35 400 468 924 446 1810 1167 643 305 345 494 540 641 M14 552 390 390 792 150 642 942 382 911 328 270HRX515 MG.xx.S.IT.A.1.50 1514 323 35 530 508 924 446 1714 1071 643 305 345 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270HRX515 MG.xx.S.IT.A.1.65 1514 323 35 530 508 924 446 1692 1049 643 305 345 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270HRX515 MG.xx.S.IT.A.1.80 1514 323 35 530 508 924 446 1727 1084 643 305 345 494 540 626 M14 552 390 390 685 150 535 875 322 896 328 270HRX515 MG.xx.S.IT.A.1.100 1514 323 35 530 508 924 446 1810 1167 643 305 345 494 540 641 M14 552 390 390 792 150 642 942 382 772 328 270HRX520 MG.xx.S.IT.A.1.50 1514 323 35 530 508 924 446 1714 1071 643 340 372 494 540 597 M14 552 390 390 755 150 605 843 216 867 328 270HRX520 MG.xx.S.IT.A.1.65 1514 323 35 530 508 924 446 1692 1049 643 340 372 494 540 612 M14 552 390 390 633 150 483 843 292 882 328 270HRX520 MG.xx.S.IT.A.1.80 1514 323 35 530 508 924 446 1727 1084 643 340 372 494 540 626 M14 552 390 390 685 150 535 875 322 896 328 270HRX520 MG.xx.S.IT.A.1.100 1514 323 35 530 508 924 446 1810 1167 643 340 372 494 540 641 M14 552 390 390 792 150 642 942 382 772 328 270
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
HRX510 1570 1350 1120 350 HRX515 1720 1500 1150 370 HRX520 1720 1500 1150 420
(*) Approximate values
For the configuration of the gas train, see pages 98-99
Type Model Power kW Electric power Fan motor Pump motor Gas connections min. max. supply kW kW
HRX512 MG.xx.S.IT.A.1.xxx 600 3.500 230/400V 3N ac 9.2 1.1 2” - DN65 - 80 - 100 HRX515 MG.xx.S.IT.A.1.xxx 770 4.400 230/400V 3N ac 11 1.5 2” - DN65 - 80 - 100 HRX520 MG.xx.S.IT.A.1.xxx 1.000 5.800 230/400V 3N ac 15 1.5 2” - DN65 - 80 - 100
TECHNICAL DETAILS
HRX512 HRX515 HRX520Model Gas train Operation Code Price € Code Price € Code Price €
MG.PR.S.IT.A.1.50 2” PR 029072453 029072853 029073253MG.PR.S.IT.A.1.65 DN65 PR 029072553 029072953 029073353MG.PR.S.IT.A.1.80 DN80 PR 029072653 029073053 029073453MG.PR.S.IT.A.1.100 DN100 PR 029072753 029073153 029073553MG.MD.S.IT.A.1.50 2” MD(*) 029072454 029072854 029073254MG.MD.S.IT.A.1.65 DN65 MD(*) 029072554 029072954 029073354MG.MD.S.IT.A.1.80 DN80 MD(*) 029072654 029073054 029073454MG.MD.S.IT.A.1.100 DN100 MD(*) 029072754 029073154 029073554
Suggested boiler drilling
Burner flange
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CEIn compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
N.B. For burners with output up to 15 MW, quotations upon requestMicroprocessor-controlled burners (see page 82)
low NOx series
74
0
2
4
6
8
10
12
14
16
18
20
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
HRX520 PR-MD
0
2
4
6
8
10
12
14
16
18
20
0 500 1000 1500 2000 2500 3000 3500 4000 4500
HRX512 PR-MD
0
2
4
6
8
10
12
14
16
18
20
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000
HRX515 PR-MD
GAS/LIGHT OILHRX512-HRX515-HRX520 GGGGGGGG
low NOx series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
75
0
40
80
120
160
200
500 1000 1500 2000 2500 3000 3500 4000
DN65
DN50
DN80
DN100
HRX512 PR-MD
HRX520 PR-MD
0
100
200
300
400
500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500
0
100
200
300
500 1000 1500 2000 2500 3000 3500 4000 4500 5000
HRX515 PR-MD
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
DN65
DN50
DN80
DN100
DN65
DN50
DN80
DN100
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
GAS/LIGHT OIL HRX512-HRX515-HRX520LL
low NOx series
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
76
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 120000 1000
RX1030 PR-MDRX1030 PR-MD...1.65RX1025 PR-MD
The die-cast aluminium burner is a product for specific applications, as far as output and dimensions are concerned. Anyway it allows, for smaller models, very easy maintenance operations thanks to the adjustable combustion head, thanks to the cover that can be easily removed to gain access to the fan wheel- head group and to the adjusting elements.The MILLE series can reach outputs up to 10.600 kW, in applications with steam boilers and in the environment-friendlyversion it allows to get the lowest NOx according to the law in force about pollution. As for the other series, also this one can be provided with microprocessor-controlled operation, optimising the regulation and the combustion.
LOW NOx BURNERS
GASRX1025-RX1030low NOx series
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
77
Type Model Power kW Electric power Fan motor Pump motor Gas connections min. max. supply kW kW
RX1025 M-.xx.S.IT.A.1.xxx 1.000 8.600 400V 3N ac 18.5 4 DN65 - 80 - 100 RX1030 M-.xx.S.IT.A.1.65 2.550 9.500 400V 3N ac 22 4 DN65 RX1030 M-.xx.S.IT.A.1.xxx 2.550 10.600 400V 3N ac 22 4 DN80 - 100
(*) Approximate values
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CE
N.B. For burners with output up to 15 MW, quotations upon request
Microprocessor-controlled burners (see page 82)
For the configuration of the gas train, see pages 98-99
Suggested boiler drilling
Burner flange
TECHNICAL DETAILS
GAS RX1025-RX1030
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
RX1025 2270 1720 1320 600 RX1030 2500 1720 1320 700
RX1025 RX1030Model Gas train Operation Code Price € Code Price €
M-.PR.S.IT.A.1.65 DN65 PR 023012853 023013153
M-.PR.S.IT.A.1.80 DN80 PR 023012953 023013253
M-.PR.S.IT.A.1.100 DN100 PR 023013053 023013353M-.MD.S.IT.A.1.65 DN65 MD(*) 023012854 023013154M-.MD.S.IT.A.1.80 DN80 MD(*) 023012954 023013254M-.MD.S.IT.A.1.100 DN100 MD(*) 023013054 023013354
Type Model Overall dimensions* (mm)
A AA AD AN AP B BB C CC D E F G H J K L M N O P Q R RR S SS U V W Y Z
RX1025 M-.xx.S.IT.A.1.65 1891 377 25 827 118 544 641 1294 680 2039 1217 822 425 475 709 660 816 M16 651 460 460 914 200 265 714 80 1092 292 1146 425 330RX1025 M-.xx.S.IT.A.1.80 1891 377 25 841 132 544 641 1294 680 2041 1219 822 425 475 709 660 816 M16 651 460 460 939 200 265 739 80 1092 322 1146 425 330RX1025 M-.xx.S.IT.A.1.100 1891 377 25 854 145 544 641 1294 680 2057 1235 822 425 475 709 660 816 M16 651 460 460 842 200 265 642 80 1092 382 1146 425 330RX1030 M-.xx.S.IT.A.1.65 1891 377 25 827 118 544 657 1294 680 2039 1217 822 454 504 709 660 816 M16 651 460 460 914 200 265 714 80 1092 292 1146 372 330RX1030 M-.xx.S.IT.A.1.80 1891 377 25 841 132 544 657 1294 680 2041 1219 822 454 504 709 660 816 M16 651 460 460 939 200 265 739 80 1092 322 1146 372 330RX1030 M-.xx.S.IT.A.1.100 1891 377 25 854 145 544 657 1294 680 2057 1235 822 454 504 709 660 816 M16 651 460 460 842 200 265 642 80 1092 382 1146 372 330
low NOx series
78
RX1025 PR-MD
0
5
10
15
20
25
1000 2000 3000 4000 5000 6000 7000 8000 90000
10
30
20
40
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
RX1030 PR-MD…1.65
0
10
30
20
40
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
RX1030 PR-MD
0
100
200
300
400
1000 2000 3000 4000 5000 6000 7000 8000 9000
DN65
DN80
DN100
RX1025 PR-MD RX1030 PR-MD…1.65
0
100
200
300
400
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
RX1030 PR-MD
0
50
100
150
200
250
300
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
DN80
DN100
DN65
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
GASRX1025-RX1030low NOx series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
79
GAS/LIGHT OIL HRX1025-HRX1030LOW NOx BURNERS
The HRX1000 series, represent because of their output and dimensions, the most powerful range of our dual fuel LOW NOx gas-light oil burners (up to 10.600 kW). These burners, in a monoblock aluminium housing, are suitable for both industrial (thermal plants) and civil (hospitals, universities,…) applications. The possibility to use two different fuels and the user-friendly maintenance facility, notwithstanding its dimensions, makes this product unique. The burner is produced in Progressive and Modulating version and upon request it can be supplied with a micro processor system giving digital control and also O2 trim if required. The controls would then be supplied in a separate control cabinet, floor standing or wall hung.This new burner series combines our well known performance and reliability characteristics, the new air inlet system with built-in silencer and with a new combustion head can give particularly low emission levels (<80 mg/kWh).
Electronic set up (optional)
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 120000 1000
HRX1030 PR-MDHRX1030 PR-MD...1.65HRX1025 PR-MD
LL
low NOx seriesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
80
HRX1025-HRX1030
Suggested boiler drilling
Burner flange
TECHNICAL DETAILS
Type Model Overall dimensions* (mm)
A AA AB AC AD AE AN AP B BB C CC D E F G H J K L M N O P Q R RR S SS U UU V W Y ZHRX1025 MG.xx.S.IT.A.1.65 2087 377 1450 683 25 580 828 118 544 641 1543 680 2039 1217 822 425 475 710 660 815 M16 651 460 460 914 200 265 714 80 1092 155 292 1145 425 330HRX1025 MG.xx.S.IT.A.1.80 2087 377 1450 683 25 580 842 132 544 641 1543 680 2041 1219 822 425 475 710 660 815 M16 651 460 460 939 200 265 739 80 1092 155 322 1145 425 330HRX1025 MG.xx.S.IT.A.1.100 2087 377 1450 683 25 580 855 145 544 641 1543 680 2057 1235 822 425 475 710 660 815 M16 651 460 460 842 200 265 642 80 1092 155 382 1145 425 330HRX1030 MG.xx.S.IT.A.1.65 2527 817 1450 683 25 580 828 118 544 657 1983 680 2039 1217 822 550 600 710 ND 815 M16 ND 460 ND 964 250 265 714 80 1092 155 292 1190 550 375HRX1030 MG.xx.S.IT.A.1.80 2527 817 1450 683 25 580 842 132 544 657 1983 680 2041 1219 822 550 600 710 ND 815 M16 ND 460 ND 989 250 265 739 80 1092 155 322 1190 550 375HRX1030 MG.xx.S.IT.A.1.100 2527 817 1450 683 25 580 855 145 544 657 1983 680 2057 1235 822 550 600 710 ND 815 M16 ND 460 ND 892 250 265 642 80 1092 155 382 1190 550 375
(*) Approximate values
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
HRX1025 2270 1720 1320 650 HRX1030 2500 1720 1320 750
GAS/LIGHT OILGG
For the configuration of the gas train, see pages 98-99
Type Model Power kW Electric power Fan motor Pump motor Gas connections min. max. supply kW kW
HRX1025 MG.xx.S.IT.A.1.xxx 1.000 8.600 400V 3N ac 18.5 4 DN65 - 80 - 100 HRX1030 MG.xx.S.IT.A.1.65 2.550 9.500 400V 3N ac 22 4 DN65 HRX1030 MG.xx.S.IT.A.1.xxx 2.550 10.600 400V 3N ac 22 4 DN80 - 100
HRX1025 HRX1030Model Gas train Operation Code Price € Code Price €
MG.PR.S.IT.A.1.65 DN65 PR 023072553 023072853
MG.PR.S.IT.A.1.80 DN80 PR 023072653 023072953
MG.PR.S.IT.A.1.100 DN100 PR 023072753 023073053MG.MD.S.IT.A.1.65 DN65 MD(*) 023072554 023072854MG.MD.S.IT.A.1.80 DN80 MD(*) 023072654 023072954MG.MD.S.IT.A.1.100 DN100 MD(*) 023072754 023073054
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95)In compliance with DIRECTIVE 2009/142/CEIn compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
N.B. For burners with output up to 15 MW, quotations upon requestMicroprocessor-controlled burners (see page 82)
low NOx series
81
GAS/LIGHT OIL HRX1025-HRX1030LLL
HRX1025 PR-MD
0
5
10
15
20
25
1000 2000 3000 4000 5000 6000 7000 8000 90000
10
30
20
40
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
HRX1030 PR-MD…1.65
0
10
30
20
40
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
HRX1030 PR-MD
0
100
200
300
400
1000 2000 3000 4000 5000 6000 7000 8000 9000
DN65
DN80
DN100
HRX1025 PR-MD HRX1030 PR-MD…1.65
0
100
200
300
400
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
HRX1030 PR-MD
0
50
100
150
200
250
300
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
DN80
DN100
DN65
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
low NOx series
OUTPUT (kW)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
) B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
B
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
POWER (kW)
POWER (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
82
MICRO PROCESSOR CONTROLLED BURNERSFor low and medium power burners
CIB UNIGAS Spa can provide our small, and medium size burners (up to 8000 kW), with an electronic control system. It can be used both on single fuel burners (gas or light oil), and on dual fuel burners (gas/light oil).
This system offers many features:
• Reduction of mechanical moving parts
• Built-in fl ame detection box
• Integrated gas proving system
• Possibility to install different types of
fl ame sensors, so that the electronic
cam system can be used on all
applications
• Variable speed drive VSD (only on
certain versions)
• Error-code display on screen in case
of lock-out
• Possibility to program or to exclude
the post purge time
• Display of hours run
83
OPERATION SCHEME
Modbus communication system, only upon request, through the software (to be quoted separately), except the base version.
Optimal air/fuel ratio regulation, with high precision and repeatability of the regulations made.
Easy programming, both through the AZL, or the proper software.
84
Electronic control box Programme AZL21
Programme AZL23 Servomotor SQN14..
Servomotor SQM33.. Inverter
BURNERS COMPLETE WITH GAS LEAKAGE CONTROLAccessories for gas burners
85
LMV20..
Series Burner type Extra charge €
IDEANG350 – NG400 – NG550 – NGX350 – NGX400 – NGX550
LG350 – LG400 – LG550
AZL21 Servomotor AIR SQN14..
Servomotor GAS SQN14..
LMV20..
Series Burner type Extra charge €
TECNOPRESSP61...1.32/40/50/65LX60...1.32/40/50/65
TECNOPRESSP65...1.50/65LX65...1.50/65
TECNOPRESSP71...1.50LX72...1.50
TECNOPRESS R73A...1.50
AZL23 Servomotor AIR SQM33..
Servomotor GAS SQN14..
GAS BURNERS Electronically operated without inverter
Complete with leakage control
86
GAS BURNERS Electronically operated without inverterComplete with leakage control
LMV20..
Series Burner type Extra charge €
TECNOPRESSP71...1.65/80LX72...1.65/80
TECNOPRESS R73A...1.65/80
NOVANTA
R91A...1.50/65/80/100R92A...1.50/65/80/100R93A...1.50/65/80/100RX90...1.50/65/80/100RX91...1.50/65/80/100
CINQUECENTO
R512A...1.50/65/80/100R515A...1.50/65/80/100R520A...1.50/65/80/100R525A...1.50/65/80/100RX510...1.50/65/80/100RX515...1.50/65/80/100RX520...1.50/65/80/100
AZL23 Servomotor AIR SQM33..
Servomotor GAS SQM33..
87
LIGHT OIL BURNERSElectronically operated without inverter
LMV20..
Series Burner type Extra charge €
TECNOPRESS PG60
TECNOPRESS PG70 – PG81
NOVANTA RG91 – RG92 – RG93
CINQUECENTO RG510 – RG515 – RG520 – RG525
AZL23 Servomotor AIR SQM33..
Servomotor GAS SQM33..
LMV26.. AZL23 Servomotor AIR SQM33..
Servomotor GAS SQM33..
Series Burner type Extra charge €
TECNOPRESS HP60...1.32/40/50/65
TECNOPRESS HP72...1.50/65/80
TECNOPRESS HR73A...1.50/65/80
NOVANTAHR91A...1.50/65/80/100HR92A...1.50/65/80/100HR93A...1.50/65/80/100
CINQUECENTO
HR512A...1.50/65/80/100HR515A...1.50/65/80/100HR520A...1.50/65/80/100HR525A...1.50/65/80/100
DUAL FUEL BURNERS NATURAL GAS/LIGHT OILElectronically operated without inverter
Complete with leakage control
88
AZL23 Servomotor AIR SQM33..
GAS BURNERSElectronically operated complete with inverter
LMV37..
Series Burner type
TECNOPRESS P61 – P65
Servomotor GAS SQN14..
Inverter
AZL23 Servomotor AIR SQM33..
LMV37..
Series Burner type
TECNOPRESS P71 – R73A
NOVANTA R91A – R92A – R93A
CINQUECENTO R512A – R515A – R520A – R525A
Servomotor GAS SQM33..
Inverter
89
LIGHT OIL BURNERSElectronically operated complete with inverter
AZL23 Servomotor AIR SQM33..
LMV37..
Series Burner type
TECNOPRESS PG60 – PG70 – PG81
NOVANTA RG91 – RG92 – RG93
CINQUECENTO RG510 – RG515 – RG520 – RG525
Servomotor GAS SQM33..
Inverter
AZL23 Servomotor AIR SQM33..
LMV26..
Series Burner type
TECNOPRESS HP60 – HP72 – HR73A
NOVANTA HR91A – HR92A – HR93A
CINQUECENTO HR512A – HR515A – HR520A – HR525A
Servomotor GAS SQM33..
Inverter
DUAL FUEL BURNERS NATURAL GAS/LIGHT OILElectronically operated complete with inverter
90
ELECTRONIC SUPERVISION AND CONTROL SYSTEMFor medium and high output burners
CIB UNIGAS S.p.A. has adopted an electronic cam and control system in its line of burners.This innovative system, which has been divided into two types of flame control box, can be used for both civil and industrial applications (up to 67 MW) and burners designed for use with a single or mixed fuel with continuous or intermittent operation, and permits the command and control of all the various elements that play a part in the correct mixture of the fuel and combustion air by means of an appropriately programmed flame control box.This versatile solution oriented to the future permits the achievement of the maximum precision in combustion adjustment.The system can also be expanded through interface with an oxygen control probe and/or a fan speed adjustment inverter in order to improve performance even further, in this way obtaining the highest savings in energy in terms of both the fuel and the electric power required.
The command and control system is composed of a twinmicroprocessor electronic unit for the integration of all burner command and control functions, and a local programming and adjustment unit.In tegrated funct ions include air/ fuel rat io adjustment (with work p o i n t c o n f i g u r a t i o n p o s s i b i l i t y ) , P I D temperature or pressure regulator, gas va lve l e a k a g e c o n t r o l , adjustable cycle times, p re - c o n f i g u re d f u e l trains, and input/output c o n f i g u r a t i o n . T h e programming levels are protected by password for the three types of use r (manu fac tu re r, servicing personnel, final user); dialogue between the servocontrol and the sensors is performed using twin-hannelCAN Bus protocol in order to guarantee the greatest safety and reliability, and the unit can be installed directly in the machine or inside a separate electric control panel positioned no further away than 100 meters.Using the appropriate designated optional software, the system can be configured directly by PC.
Flame control box integrated functions:• Burner control;• Electronic cam;• Power regulator;• Gas valve leakage control system;• Oxygen control;• Inverter control;• Dialogue with BMS systems or PLC (MOD Bus);• Burner commissioning and configuration via PC-tool;• Simple programming with AZL and PC-tool;• Complete self-diagnostic function (error memory, number of firings, burner operation time, clock, etc.);• 3 levels of parameter access: (manufacturer, servicing personnel, final user);• Remote diagnostics;• All components can be easily interchanged;• Parameter upgrading with PC-tool;• Dialogue with MOD Bus protocol.
91
ACCESSORIES FOR GAS BURNERSDescriptions
Electronic control boxLMV 51.100 (without O2 trim)
Electronic control boxLMV 52.200 (with O2 trim)
Programme (AZL 5xx)
Servomotor Air (SQM 4xx) Servomotor Gas (SQM 4xx)
Oxigen probe Inverter
Servomotor Oil (SQM 4xx)
92
Fuel Burner type Extra charge €
GASR91A - R92A - R93A - R512A - R515A - R520A - R525A
R1025 - R1030..DN65 - R1030 - R1040
LIGHT OILRG91 - RG92 - RG93 - RG510 - RG515 RG520 - RG525 - RG1030 - RG1040
HEAVY OILPN91 - PN92 - PN93 - RN510 - RN515 RN520 - RN525 - RN1030 - RN1040
Electronically operated burners without O2 trim and inverter NO modulation probe
Fuel Burner type Extra charge €
DUAL FUELGAS-LIGHT OIL
HR91A - HR92A - HR93A - HR512A - HR515A - HR520A - HR525AHR1025 - HR1030..DN65 - HR1030 - HR1040
DUAL FUEL GAS-HEAVY OIL
KP91A - KP92A - KP93A - KR512 - KR515 - KR520 - KR525KR1030 - KR1040
Electronically operated burners without O2 trim and inverter NO modulation probe
Fuel Burner type Extra charge €
GASR91A - R92A - R93A - R512A - R515A - R520A
R525A - R1025 - R1030..DN65 - R1030 - R1040
Electronically operated burners complete with O2 trim without inverter. Oxygen probe included. NO modulation probe
ACCESSORIES FOR GAS BURNERS
93
Fuel Burner type Extra charge €
DUAL FUELGAS-LIGHT OIL
HR91A - HR92A - HR93A - HR512A - HR515A - HR520A HR525A - HR1025 - HR1030..DN65 - HR1030 - HR1040
DUAL FUELGAS-HEAVY OIL *
KP91A - KP92A - KP93A - KR512A - KR515A - KR520A KR525A - KR1025 - KR1030..DN65 - KR1030 - KR1040
Electronically operated burners with O2 trim without inverter. With oxygen probe. NO modulation probe
Fuel Burner type Extra charge €
GASR91A - R92A - R93A - R512A - R515A - R520A - R525A
R1025 - R1030..DN65 - R1030 - R1040
LIGHT OILRG91 - RG92 - RG93 - RG510 - RG515 - RG520 - RG525
RG1030 - RG1040
HEAVY OILPN91 - PN92 - PN93 - RN510 - RN515 RN520 - RN525
RN1030 - RN1040
Electronically operated burners complete with inverter without oxygen trim. NO modulation probe
Fuel Burner type Extra charge €
DUAL FUELGAS-LIGHT OIL
HR91A - HR92A - HR93A - HR512A - HR515A - HR520A - HR525AHR1025 - HR1030..DN65 - HR1030 - HR1040
DUAL FUEL GAS-HEAVY OIL
KP91A - KP92A - KP93A - KR512A - KR515A - KR520AKR525A - KR1025 - KR1030..DN65 - KR1030 - KR1040
Electronically operated burners complete with inverter NO oxygen trim. NO modulation probe
(*) The O2 trim can be performed only when working with gas.
ACCESSORIES FOR GAS BURNERS
94
Fuel Burner type Extra charge €
GASR91A - R92A - R93A - R512A - R515A - R520A
R525A - R1025 - R1030..DN65 - R1030 - R1040
Electronically operated burners complete with inverter and O2 trim. With Oxigen probe. NO modulation probe
Fuel Burner type Extra charge €
DUAL FUELGAS-LIGHT OIL
HR91A - HR92A - HR93A - HR512A - HR515A - HR520A HR525A - HR1025 - HR1030..DN65 - HR1030 - HR1040
DUAL FUEL GAS-HEAVY OIL *
KP91A - KP92A - KP93A - KR512A - KR515A - KR520AKR525A - KR1025 - KR1030..DN65 - KR1030 - KR1040
Electronically operated burners complete with inverter O2 trim*. With Oxigen Probe. NO modulation probe
Motor output kW Burner type Extra charge €
4 R/RG/HR/PN/KP 91
5,5 R/RG/HR/PN/KP 92
7,5 R/RG/RN/HR/PN/KP 93/510
9,2 R/HR/KR 512
11 R/RG/RN/HR/KR 515
15 R/RG/RN/HR/KR 520
18,5 R/RG/RN/HR/KR 1025
22 R/RG/RN/HR/KR 1030
30 R/RG/RN/HR/KR 1040
Inverter
(*) The O2 trim can be performed only when working with gas.
ACCESSORIES FOR GAS BURNERS
95
ACCESSORIES FOR GAS BURNERS
(*) Hot air probe
PROBES FOR SIEMENS MODULATORS
Variable to be checked Temperature/Pressure scale Code Price €
Temperature* -15 ÷ 50°C 2.56.01.35 Temperature 30 ÷ 130°C 2.56.01.01 Temperature 0 ÷ 350°C 2.56.01.77 Temperature 0 ÷ 1200°C 2.56.01.42 Pressure 1,6bar 2.56.01.A3 Pressure 10bar 2.56.01.A4 Pressure 16bar 2.56.01.A5 Pressure 25bar 2.56.01.A6 Pressure 40bar 2.56.01.A7
LEAKAGE CONTROLS
Description Code Price €
DUNGS VPS 504 2.19.16.06
LEAKAGE CONTROLS MOUNTING KITS (for groups with separate valves only)
Description Code Price €
DUNGS VPS 504 2.19.12.01 GAS MAXIMUM PRESSURE SWITCH KIT 2.19.12.41
specia l components
PNEUMATICALLY OPERATED SLIDE FOR BURNERS UP TO 800 kW (without stokehole closing, neither automatic nor manual)
Description Code Price €
For burners P61 (control fluid: 8 bar compressed air) 3.11.00.14 For burners P65 - P71 - R73A (control fluid: 8 bar compressed air) 3.11.00.15
Wheel over ACOUSTIC SHROUD (made in sheet steel, oven painted and coated with soundproofing material)
Description Price €
Idea series Tecnopress series Novanta series Cinquecento series Mille series
96
AIR INLET ATTENUATORS directly mounted on the burner (made in sheet steel, oven painted and coated with soundproofing material)
Description Code Price €
Suitable for burners up to 800 kW (P61) 3.15.01.13 Suitable for burners up to 2.300 kW (P65 - P71) 3.15.01.08
SPACERS
Height mm Burner type Code Price €
100 S10 - S18 3.07.03.04 175 S10 - S18 3.07.03.05100 NG280 - 350 - 400 - LO280 - 350 - 400 3.07.03.11100 NG550 - LO550 3.07.03.12100 P61 3.07.03.15 200 P61 3.07.03.18100 P65 - P71 - R73A 3.07.03.21 220 P65 - P71 - R73A 3.07.03.25 100 R91A - R92A - R93A 3.07.03.28150 R91A - R92A - R93A 3.07.03.29200 R91A - R92A - R93A 3.07.03.30 250 R91A - R92A - R93A 3.07.03.31 150 R512A - R515A - R520A - R525A 3.07.03.36 250 R512A - R515A - R520A - R525A 3.07.03.39 150 R1025 - R1030 - R1040 3.07.03.44250 R1025 - R1030 - R1040 3.07.03.45
MANUAL ISOLATION VALVES, THREADED (ball type)
Gas connections Model Code Price €
1⁄2” V15 2.81.00.01 3⁄4” V20 2.81.00.02 1” V25 2.81.00.03 1”1⁄2 V40 2.81.00.05 2” V50 2.81.00.06
MANUAL ISOLATION VALVES, FLANGED (ball type)
Gas connections Model Code Price €
DN65 V65 2.81.00.12 DN80 V80 2.81.00.13 DN100 V100 2.81.00.14
ACCESSORIES FOR GAS BURNERS
97
BELLOWS UNIT (threaded)
Gas connections Model Code Price €
1⁄2” GA15 2.34.00.62 3⁄4” GA20 2.34.00.76 1” GA25 2.34.00.77 1”1⁄2 GA40 2.34.00.78 2” GA50 2.34.00.79
GAS FILTERS (flanged)
Gas connections Model Code Price €
DN65 F65 2.09.01.17 DN80 F80 2.09.01.12 DN100 F100 2.09.01.13
PRESSURE GOVERNORS WITH GAS FILTERS (threaded) Pe max 1bar
Gas connections Model Code Price €
1⁄2” S.P.15 2.80.00.66 3⁄4” S.P.20 2.80.00.47 1” S.P.25 2.80.00.72 1”1⁄2 S.P.40 2.80.00.65 2” S.P.50 2.80.00.67
BELLOWS UNIT (flanged)
Gas connections Model Code Price €
DN65 GA65 2.34.00.81 DN80 GA80 2.34.00.82 DN100 GA100 2.34.00.83
GAS FILTERS (threaded)
Gas connections Model Code Price €
1⁄2” F15 2.09.01.01 3⁄4” F20 2.09.01.02 1” F25 2.09.01.03 1”1⁄2 F40 2.09.01.05 2” F50 2.09.01.19
PRESSURE GOVERNORS WITH GAS FILTERS (flanged) Pe max 1bar
Gas connections Model Code Price €
DN65 S.P.65 2.80.00.69 DN80 S.P.80 2.80.00.71 DN100 S.P.100 2.80.00.74
ACCESSORIES FOR GAS BURNERS
98
INSTALLATORECOSTRUTTORE
12
3
4 5
7 8
94
12
5
7 8
94
16
4
3
12
54
6 7 8
10
4
12
54
6 7 8
10
16
4
1
3
2
54
6 7 8
13124
12
4
6 7 8
51312
16
4
Gas train with valves group MB-DLE (2 valves + gas filter + pressure governor) + leakage control VPS504.
Gas train with valves group MB-DLE (2 valves + gas filter + pressure governor) + leakage control pressure switch
Gas train with valves group VGD with built-in gas pressure governor + leakage control VPS504.
Gas train with valves group VGD with built-in gas pressure governor + leakage control pressure switch
Gas train with valves group DMVDLE + leakage control VPS504.
Gas train with valves group DMVDLE + leakage control pressure switch
GAS TRAINS
MANUFACTURER INSTALLER
99
INSTALLATORECOSTRUTTORE
12
4 5
6 7 8
11
15 155
7 8
143
4
12
4 5
6 7 8
11
16
15 155
7 8
14
4
1 Burner2 Butterfly valve3 Leakage control device (optional if output < 1200 kW)4 Maximum gas pressure switch (optional)5 Minimum gas pressure switch6 Gas filter7 Bellow joint8 Manual cock9 Valves group MB-DLE
10 Valves group VGD12 Pressure governor13 Valves group DMV-DLE14 Pressure governor15 Solenoid valve16 Leakage control pressure switch (optional if output < 1200 kW)
(*) The max gas pressure switch can be either mounted before or after the gas valve, but always before the butterfly valve (see scheme - element 4).
KEY
Gas train with valve group VGD, c/w built-in pressure governor+leakage control VPS504. Pilot train with double valve and filter/governor.
Gas train with valve group VGD, c/w built-in pressure governor+leakage control pressure switch. Pilot train with double valve and filter/governor.
GAS TRAINS
MANUFACTURER INSTALLER
100
l i g h t o i l b u r n e r s
idea seriesLO35 - TNLO60 - TN/ABLO90 - TN/AB LO140 - TN/AB
LO200 - TN/ABLO280 - TN/AB LO400 - TN/AB LO550 - TN/AB
tecnopress seriesPG60 - AB/PR/MDPG70 - AB/PR/MDPG81 - AB/PR/MD
LO35
LO35
PG81
RG510
RG510
RG520
RG1030
RG1040
(from 1
(from 1.314 to 3.953 kW)
(from 264 to 1.900 kW)
(from 21 to 41 kW)
(from 14 to 41 kW)
RG91
RG91
RG92
(from 1.280 to 2.558 kW)
(from 698 to 2.093 kW)
(from 1.047 to 2.093 kW)
(from 849 to 2.558 kW)
RG92
LO90
LO60
LO200
LO200
(from 80 to 200 kW)
(from 38 to 200 kW)
LO140
LO140
(from 38 to 160 kW)
(from 80 to 160 kW)
(from 35 to 85 kW)
(from 30 to 60 kW)
LO60 (from 25 to 60 kW)
LO90 (from 24 to 85 kW)
LO550
LO550
PG60
PG60
PG70 (from 291 to 1.047 kW)
(from 151 to 791 kW)
(from 145 to 698 kW)
(from 200 to 560 kW)
(from 160 to 560 kW)
LO400
LO400
(from 115 to 420 kW)
(from 195 to 420 kW)
RG93 (from 550 to 4.100 kW)
RG525
LO280
LO280
(from 115 to 310 kW)
(from 70 to 310 kW)
LOX35 (from 17 to 35 kW)
LOX140 (from 64 to 130 kW)
LOX90 (from 28 to 70 kW)
LOX60 (from 24 to 50 kW)
LOX35 - TNLOX60 - TNLOX90 - TNLOX140 - TN
Type
101
novanta - cinquecento seriesRG91 - AB/PR/MDRG92 - PR/MDRG93 - PR/MD
RG510 - PR/MDRG515 - PR/MDRG520 - PR/MDRG525 - PR/MD
mille seriesRG1030 - PR/MDRG1040 - PR/MD
(from 2.550 to 10.600 kW)
(from 2.326 to 6.977 kW)
.628 to 4.884 kW)
(from 2.000 to 8.000 kW)
(from 2.550 to 13.000 kW)
102
These light oil burners cover most of the civil users and represent the best solution in terms of design and reliability.In fact IDEA burners satisfies the specific requirements of the market, ensuring the maximum efficiency of the performance and easy maintenance. In particular, the possibility to simplify the operations of services moving the baking plate of the components, makes the maintenance shorter and safer.Recently the new LOW NOx series has been implemented.
LO60 AB
LO90 TN
LO60 TN
LO35 TN..PLO35 TN
LOX35 TN
LOX60 TN
LOX90 TNLO90 AB
LIGHT OIL
ideaser iesLO35-LOX35-LO60-LOX60-LO90-LOX90
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
103
TECHNICAL DETAILS
Suggested boiler drilling
Burner flange
LIGHT OIL LO35-LOX35-LO60-LOX60-LO90-LOX90
Type Model Power kW Electric power Fan motor min. max. supply kW
LO35 G-.TN.x.IT.A 21 41 230V 1N ac 0.075 LO35 G-.TN.x.IT.A.P 14 41 230V 1N ac 0.075 LOX35 G-.TN.x.IT.A 17 35 230V 1N ac 0.075 LO60 G-.TN.x.IT.A 30 60 230V 1N ac 0.1 LO60 G-.AB.x.IT.A 25 60 230V 1N ac 0.1 LOX60 G-.TN.x.IT.A 24 50 230V 1N ac 0.1 LO90 G-.TN.x.IT.A 35 85 230V 1N ac 0.15 LO90 G-.AB.x.IT.A 24 85 230V 1N ac 0.15 LOX90 G-.TN.x.IT.A 28 70 230V 1N ac 0.15
(*) Approximate values
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
LO35 290 260 490 10 LOX35 290 260 490 10 LO60 400 300 520 14 LOX60 400 300 520 14 LO90 400 300 520 14 LOX90 400 300 520 14
Type Model Overall dimensions * (mm)
A B C D E F G H II K L M N O P T W Z
min max min max min max minLO35 G-.TN.S.IT.A 338 58 100 238 280 269 14 255 Ø80 Ø95 Ø88 145 194 M8 153 96 120 108 6 266 72LO35 G-.TN.L.IT.A 416 58 178 238 358 269 14 255 Ø80 Ø95 Ø88 145 194 M8 153 96 120 108 6 266 72LOX35 G-.TN.S.IT.A 338 58 100 238 280 269 14 255 Ø80 Ø95 Ø88 145 194 M8 153 96 120 108 6 266 72LOX35 G-.TN.L.IT.A 416 58 178 238 358 269 14 255 Ø80 Ø95 Ø88 145 194 M8 153 96 120 108 6 266 72LO60 G-.xx.S.IT.A 365 58 71 274 307 305 14 291 Ø80 Ø95 Ø88 145 218 M8 153 96 120 108 2 291 72LO60 G-.xx.L.IT.A 443 58 169 274 385 305 14 291 Ø80 Ø95 Ø88 145 218 M8 153 96 120 108 2 291 72LOX60 G-.TN.S.IT.A 365 58 71 274 307 305 14 291 Ø80 Ø95 Ø88 145 218 M8 153 96 120 108 2 291 72LOX60 G-.TN.L.IT.A 443 58 169 274 385 305 14 291 Ø80 Ø95 Ø88 145 218 M8 153 96 120 108 2 291 72LO90 G-.xx.S.IT.A 365 58 71 294 307 305 14 291 Ø80 Ø95 Ø88 145 218 M8 153 96 120 108 2 291 72LO90 G-.xx.L.IT.A 443 58 149 294 385 305 14 291 Ø80 Ø95 Ø88 145 218 M8 153 96 120 108 2 291 72LOX90 G-.TN.S.IT.A 365 58 71 294 307 305 14 291 Ø80 Ø95 Ø88 145 218 M8 153 96 120 108 2 291 72LOX90 G-.TN.L.IT.A 443 58 149 294 385 305 14 291 Ø80 Ø95 Ø88 145 218 M8 153 96 120 108 2 291 72
ideaser ies
104
◆ Burner equipped with external air inlet Burner provided with pre-heating system on the atomization group
In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
LIGHT OILLO35-LOX35-LO60-LOX60-LO90-LOX90
LO35 LO60 LO90Model Operation Code Price € Code Price € Code Price €
G-.TN.S.IT.A TN 024050101 025050901 025050101G-.TN.L.IT.A TN 024050201 025051001 025050201G-.TN.S.IT.Z ◆ TN 024050501 - -G-.TN.L.IT.Z ◆ TN 024050601 - -G-.TN.S.IT.A.P ❖ TN 024050301 - -G-.TN.L.IT.A.P ❖ TN 024050401 - -G-.TN.S.IT.Z.P ◆❖ TN 024050701 - -G-.TN.L.IT.Z.P ◆❖ TN 024050801 - -G-.AB.S.IT.A AB - 025050902 025050102G-.AB.L.IT.A AB - 025051002 025050202
LOX35 LOX60 LOX90Model Operation Code Price € Code Price € Code Price €
G-.TN.S.IT.A TN 024051101 025051901 025052101G-.TN.L.IT.A TN 024051201 025052001 025052201
ideaser ies
105
LOX35 TN
LOX60 TN LOX90 TN
LIGHT OIL LO35-LOX35-LO60-LOX60-LO90-LOX90ideaser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
106
LO200 ABLO200 TN
LO140 ABLOX140 TN
LO140 TN
These light oil burners cover most of the civil users and represent the best solution in terms of design and reliability.In fact IDEA burners satisfies the specific requirements of the market, ensuring the maximum efficiency of the performance and easy maintenance. In particular, the possibility to simplify the operations of services moving the baking plate of the components, makes the maintenance shorter and safer.Recently the new LOW NOx series has been implemented.
LIGHT OILLO140-LOX140-LO200ideaser ies
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
107
(*) Approximate values
Suggested boiler drilling
Burner flange
Type Packaging dimensions* (mm) l p h kg
LO140..S 600 370 400 25 LO140..L 750 370 400 25 LOX140..S 600 370 400 25 LOX140..L 750 370 400 25 LO200..S 600 370 400 25 LO200..L 750 370 400 25
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor min. max. supply kW
LO140 G-.TN.x.IT.A 80 160 230V 1N ac 0.18 LO140 G-.AB.x.IT.A 38 160 230V 1N ac 0.18 LOX140 G-.TN.x.IT.A 64 130 230V 1N ac 0.18 LO200 G-.TN.x.IT.A 80 200 230V 1N ac 0.18 LO200 G-.AB.x.IT.A 38 200 230V 1N ac 0.18
In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
(*) Approximate values
Type Model Overall dimensions* (mm) Boiler drilling* (mm) Burner flange*(mm)
A B C D G Y L T X H M N P K O min max min max min max
LO140 G-.xx.S.IT.A 560 80 170 390 475 373 108 108 244 32 338 128 M8 188 133 188 108 158 LO140 G-.xx.L.IT.A 660 80 270 390 575 373 108 108 244 32 338 128 M8 188 133 188 108 158 LOX140 G-.xx.S.IT.A 560 80 170 390 475 373 108 108 244 32 338 128 M8 188 133 188 108 158 LOX140 G-.xx.L.IT.A 660 80 270 390 575 373 108 108 244 32 338 128 M8 188 133 188 108 158 LO200 G-.xx.S.IT.A 560 65 170 390 475 373 108 108 244 32 338 128 M8 188 133 188 108 158 LO200 G-.xx.L.IT.A 660 65 270 390 575 373 108 108 244 32 338 128 M8 188 133 188 108 158
LO140 LO200Model Operation Code Price € Code Price €
G-.TN.S.IT.A TN 026050101 026050301G-.TN.L.IT.A TN 026050201 026050401G-.AB.S.IT.A AB 026050102 026050302G-.AB.L.IT.A AB 026050202 026050402
LOX140Model Operation Code Price €
G-.TN.S.IT.A TN 026050901G-.TN.L.IT.A TN 026051001
LIGHT OIL LO140-LOX140-LO200ideaser ies
108
LOX140 TN
LIGHT OILLO140-LOX140-LO200ideaser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
109
LO550 ABLO550 TNLO400 ABLO400 TN
LO280 TNLO280 AB
Thanks to the new line IDEA, CIB UNIGAS presents a brand new range of small and medium size burners designed to be aesthetic and functional but at the same time gives prominence to innovative technologies.Compactness, versatility and the optimum geometry of all electronic and mechanical components inside the burner, ensure minimum overall dimensions and higher efficiency. This light oil burners are equipped with a stainless steel blast tube whose length is adjustable according to boiler requirements. Light oil version fits a nozzleholder designed to reduce the air resistance and the special diffuser can be easily moved along a graduated gauge on the nozzle-holder.As for gas burners, also the light oil range is designed to make servicing easier: universal pre-wired electrical plug connections avoid wiring mistakes; mechanical components are fitted onto a backing plate which can be moved and attached to special fixings within the burner; a special combustion air intake maximises the air pressure; the reduced thickness of the flange allows for exploitation of small spaces; the position of the combustion head is adjustable by means of a graduated screw.
LIGHT OIL LO280-LO400-LO550ideaser ies
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
110
TECHNICAL DETAILS
▲ Version with hydraulic ram. In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
(*) Approximate values
(*) Approximate values
Type Model Power kW Electric power Fan motor min. max. supply kW
LO280 G-.TN.x.IT.A 115 310 230V 1N ac 0.25 LO280 G-.AB.x.IT.A 70 310 230V 1N ac 0.25 LO400 G-.TN.M.IT.A 195 420 230V 1N ac 0.37 LO400 G-.AB.M.IT.A 115 420 230V 1N ac 0.37 LO550 G-.TN.x.IT.A 200 560 230V 1N ac 0.62 LO550 G-.AB.x.IT.A 160 560 230V 1N ac 0.62
Type Packaging dimensions* (mm) l p h kg
LO280/350/400 1120 440 580 42 LO550 1200 460 630 55
Type Model Overall dimensions* (mm) Boiler drilling* (mm) Burner flange* (mm)
A AL B BL C F G Y L T X H M N P O K1 K2 min max
LO280 G-.TN.x.IT.A 733 878 163 308 570 396 108 108 348 128 460 128 M10 219 155 131 179 215 223LO280 G-.AB.x.IT.A 733 878 163 308 570 396 108 108 348 128 492 128 M10 219 155 131 179 215 223LO400 G-.xx.x.IT.A 748 878 178 308 570 396 125 144 348 89 491 164 M10 219 155 131 179 215 223LO550 G-.xx.x.IT.A 843 943 253 353 590 426 155 155 384 69 533 175 M10 247 174 157 192 241 241
Suggested boiler drilling
Burner flange
LO280 LO400 LO550Model Operation Code Price € Code Price € Code Price €
G-.TN.S.IT.A TN 027050701 - 028050101G-.TN.L.IT.A TN 027050801 - 028050201G-.TN.M.IT.A TN 027050301 -G-.AB.S.IT.A AB 027050702 - 028050102G-.AB.L.IT.A AB 027050802 - 028050202G-.AB.M.IT.A AB 027050302 -G-.AB.S.IT.A.M ▲ AB - 028050502G-.AB.L.IT.A.M ▲ AB - 028050602G-.AB.M.IT.A.M ▲ AB 027050402
LO280-LO400-LO550 LIGHT OIL
ideaser ies
111
LO280-LO400-LO550
LO280 TNLO280 AB
0
5
3
4
1
2
6
POTENZA/OUTPUT (kW)
Co
ntro
pre
ssio
ne in
cam
era
di c
om
bus
tio
ne (m
bar
)
POTENZA/OUTPUT (kW)
50 100 150 200 250 300 350
0
1
2
3
4
5
6
7
8
9
LO400 AB LO400 TN
LO550 TNLO550 AB
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
100 150 200 250 300 350 400 450
POTENZA/OUTPUT (kW)
150 200 250 300 350 400 450Co
ntro
pre
ssio
ne in
cam
era
di c
om
bus
tio
ne (m
bar
)
POTENZA/OUTPUT (kW)
POTENZA/OUTPUT (kW)
100 150 200 250 300 350 400 450 500 550 600 150 200 250 300 350 400 450 500 550 600
POTENZA/OUTPUT (kW)
Co
ntro
pre
ssio
ne in
cam
era
di c
om
bus
tio
ne (m
bar
)
0
5
3
4
1
2
6
50 100 150 200 250 300 350
LIGHT OIL
ideaser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
112
1
3
5
7
9
11
13
0
2
4
6
8
10
12
14
100
PG81 AB-PR-MDPG70 AB-PR-MD
PG60 PR-MDPG60 AB-PR-MD
300 500 700 900 1100 1300 1500 1700 1900
PG30 PR-MD
These burners are rated from 105 to 1900 kW and have a range of applications including pressurized boilers and hot air generators, hot water and steam boilers; and medium size ovens for thermal treatment.The simple operation together with the safety ensured by our constant tests performed in our laboratory and the conformity to EC directives, makes the burner a sophisticated and reliable machine.A biodiesel version is also available.All burners are equipped with a fan motor and a separate motor for the operation of the light oil pump through a flexible coupling. The control panel is complete with an electronic control box and photoresistor. The control logic is incorporated on a printed circuit. The atomization and fuel supply systems include: nozzle, ignition electrodes, flexibles and filters.
PG30-PG60-PG70-PG81 LIGHT OIL
tecnopress ser iesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
113
PG30-PG60-PG70-PG81
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor min. max. supply kW
PG30 G-.PR.x.IT.A 105 383 230 V 1N ac 0.37 PG60 G-.AB.x.IT.A 145 698 230/400 V 3N ac 1.1 PG60 G-.PR.x.IT.A 151 791 230/400 V 3N ac 1.1 PG70 G-.xx.x.IT.A 291 1.047 230/400 V 3N ac 2.2 PG81 G-.xx.x.IT.A 264 1.900 230/400 V 3N ac 3
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95 and 125)In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CEMicroprocessor-controlled burners (see page 82)
(*) Approximate values
Type Model Overall dimensions* (mm) dimensions* (mm) A AL B BL C D E F G Y L H M N P O K l p h kg min max
PG30 G-.PR.x.IT.A 662 852 150 340 512 516 267 249 121 131 284 151 M10 219 155 155 155 190 1000 550 460 30 PG60 G-.AB.x.IT.A 874 1072 244 442 630 615 330 285 153 162 350 182 M10 269 190 190 190 240 1200 670 540 65 PG60 G-.xx.x.IT.A 1004 1202 244 442 760 630 330 300 153 162 350 182 M10 269 190 190 190 240 1200 670 540 65 PG70 G-.AB.x.IT.A 995 1145 310 460 685 710 360 350 198 198 375 228 M10 330 233 216 250 300 1280 850 760 82 PG70 G-.xx.x.IT.A 1035 1185 310 460 725 780 360 420 198 198 375 228 M10 330 233 216 250 300 1280 850 760 87 PG81 G-.AB.x.IT.A 1025 1175 340 490 685 765 400 365 234 198 375 264 M10 330 233 216 250 300 1280 850 760 95 PG81 G-.xx.x.IT.A 1165 1315 340 490 825 820 400 420 234 198 375 264 M10 330 233 216 250 300 1280 850 760 100
Boilerdrilling* (mm)
Burnerflange* (mm)
PG30 - PG60 PG70 - PG81
Suggested boiler drilling
Burner flangeSuggested
boiler drillingBurner flange
PG30 PG60 PG70 PG81Model Operation Code Price € Code Price € Code Price € Code Price €
G-.AB.S.IT.A AB 004050102 008050102 008051302G-.AB.L.IT.A AB 004050202 008050202 008051402G-.PR.S.IT.A PR 003050103 004050103 008050103 008051303G-.PR.L.IT.A PR 003050203 004050203 008050203 008051403G-.MD.S.IT.A MD(*) 003050104 004050104 008050104 008051304G-.MD.L.IT.A MD(*) 003050204 004050204 008050204 008051404
LIGHT OIL
Packaging
tecnopress ser ies
114
PG30 PR-MD
100 200 300 400
1
2
3
4
5
6
LIGHT OILPG30-PG60-PG70-PG81tecnopress ser ies
OUTPUT (kW) Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW) Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
115
RG510 PR-MDRG93 PR-MD
RG91 PR-MDRG91 AB
RG515 PR-MDRG520 PR-MDRG525 PR-MD
RG92 PR-MD
This monobloc series made of a solid die-cast aluminium housing, represents all our experience made in the field of medium-large output burners.The monobloc version incorporates into the casting the combustion air fan which is mounted direct on the shaft of a three phase motor. The oil pump works through a dedicated motor.The range is divided in two groups: the series NOVANTA (up to 4100 kW), and the series CINQUECENTO (up to 8000 kW), both are equipped with a by-passing nozzle to allow a ratio 1:3.The light oil output can be adjusted through a pressure regulator which effects on the return pipe line.All burners fit a control panel which includes the control box and a mimic diagram with lamps showing the sequential stages of burner operation.
LIGHT OIL RG91-RG92-RG93-RG510-RG515-RG520-RG525novanta-cinquecentoser ies
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
116
TECHNICAL DETAILS
Suggested boiler drilling
Burner flange
Type Model Power kW Electric power Fan motor Pump motor min. max. supply kW kW
RG91 G-.AB.x.IT.A 1.047 2.093 230/400 V 3N ac 4 1.1 RG91 G-.xx.x.IT.A 698 2.093 230/400 V 3N ac 4 1.1 RG92 G-.xx.x.IT.A 849 2.558 230/400 V 3N ac 5.5 1.1 RG93 G-.xx.x.IT.A 550 4.100 230/400 V 3N ac 7.5 1.1
Type Model Overall dimensions * (mm)
AS AL AA AB AC AD AE BS BL BB C CC D E F G H K L M N O P W Y Z
min maxRG91 G-.xx.x.IT.A 1259 1432 242 925 436 35 327 300 473 419 959 422 853 419 434 238 268 360 523 M12 417 280 310 295 708 228 185RG92 G-.xx.x.IT.A 1253 1426 242 925 436 35 327 294 467 419 959 422 853 419 434 266 296 360 523 M12 417 280 310 295 708 228 185RG93 G-.xx.x.IT.A 1253 1426 242 925 436 35 327 294 467 460 959 422 894 460 434 266 296 360 523 M12 417 280 310 295 708 228 185
(*) Approximate values
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
RG91 1730 1280 1020 230 RG92 1730 1280 1020 270 RG93 1730 1430 1130 290
RG91-RG92-RG93-RG510-RG515-RG520-RG525 LIGHT OIL
novanta-cinquecentoser ies
117
RG91-RG92-RG93-RG510-RG515-RG520-RG525
TECHNICAL DETAILS
(*) Approximate values In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Suggested boiler drilling
Burner flange
Type Model Overall dimensions * (mm)
A (AS) A (AL) AA AB AC AD B (BS)B (BL) BB C CC D E F G H K L M N O P W Y ZRG510 G-.xx.x.IT.A 1451 1671 219 217 246 35 310 530 468 1141 571 1314 671 643 329 369 540 496 M14 552 390 390 766 328 270RG515 G-.xx.x.IT.A 1451 1671 219 217 246 35 310 530 508 1141 571 1324 681 643 350 390 540 496 M14 552 390 390 766 328 270RG520 G-.xx.x.IT.A 1451 1671 219 207 250 35 310 530 508 1141 571 1324 681 643 370 410 540 496 M14 552 390 390 880 328 270RG525 G-.xx.x.IT.A 1511 1691 219 197 275 35 350 530 650 1161 571 1341 698 643 434 484 540 496 M14 552 390 390 938 434 270
Type Model Power kW Electric power Fan motor Pump motor min. max. supply kW kW
RG510 G-.xx.x.IT.A 1.314 3.953 230/400 V 3N ac 7.5 1.1 RG515 G-.xx.x.IT.A 1.628 4.884 230/400 V 3N ac 11 1.5 RG520 G-.xx.x.IT.A 2.326 6.977 230/400 V 3N ac 15 1.5 RG525 G-.xx.x.IT.A 2.000 8.000 400 V 3N ac 18.5 3
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
RG510/515/520 1720 1500 1150 330 RG525 1800 1500 1300 350
LIGHT OIL
novanta-cinquecentoser ies
118
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95 and 125) In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Microprocessor-controlled burners (see page 82)
TECHNICAL DETAILS
RG91 RG92 RG93Model Operation Code Price € Code Price € Code Price €
G-.AB.S.IT.A AB 012050902 - -G-.AB.L.IT.A AB 012051002 - -G-.PR.S.IT.A PR 012050903 012051103 012051303G-.PR.L.IT.A PR 012051003 012051203 012051403G-.MD.S.IT.A MD(*) 012050904 012051104 012051304G-.MD.L.IT.A MD(*) 012051004 012051204 012051404
RG510 RG515 RG520 RG525Model Operation Code Price € Code Price € Code Price € Code Price €
G-.PR.S.IT.A PR 029050103 029050303 029050503 029050703G-.PR.L.IT.A PR 029050203 029050403 029050603 029050803G-.MD.S.IT.A MD(*) 029050104 029050304 029050504 029050704G-.MD.L.IT.A MD(*) 029050204 029050404 029050604 029050804
RG91-RG92-RG93-RG510-RG515-RG520-RG525 LIGHT OIL
novanta-cinquecentoser ies
119
0
2
4
6
8
10
12
14
16
18
800 1200 1600 2000 24000
2
4
6
8
10
12
14
16
18
400 800 1200 1600 2000 2400
0
2
4
6
8
10
12
14
16
18
400 800 1200 1600 2000 2400 28000
2
4
6
8
10
12
14
16
18
400 800 1200 1600 2000 2400 2800 3200 3600 4000 4400
0
4
8
12
16
20
24
1000 1800 2600 3400 42000
4
8
12
16
20
24
1200 2000 2800 3600 4400 5200
0
4
8
12
16
20
24
2000 2800 3600 4400 5200 6000 6800 76000
4
8
12
16
20
24
1500 2500 3500 4500 5500 6500 7500 8500
RG91 PR-MD
RG93 PR-MDRG92 PR-MD
RG515 PR-MDRG510 PR-MD
RG525 PR-MDRG520 PR-MD
RG91-RG92-RG93-RG510-RG515-RG520-RG525LIGHT OIL
novanta-cinquecentoser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
120
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000
RG1030 PR-MDRG1040 PR-MD
Thanks to its brand new combustion head specifically designed to optimise efficiency of combustion by means of a by-passing nozzle that ensures a turndown ratio 1:3. The reliable ignition of the burner is ensured by a pilot burner on LPG.Minimum and maximum output is achieved by means of a pressure regulator operated by variable profile cam. This product is the result of our policy made of investments in research and tests in our laboratory to improve o u r re s u l t s c o n t i n u o u s l y with particular care to the environment and reliability.The flame safeguard system is operated through a photoresistor.
Electronic set up (optional)
RG1030-RG1040 LIGHT OIL
milleser iesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
121
RG1030-RG1040
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor min. max. supply kW kW
RG1030 G-.xx.S.IT.A 2.550 10.600 400 V 3N ac 22 4 RG1040 G-.xx.S.IT.A 2.550 13.000 400 V 3N ac 30 5.5
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95 and 125) In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Microprocessor-controlled burners (see page 82)
0
10
20
30
2000 3000 4000 5000 6000 7000 8000 9000 10000 1 10000
10
20
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000
Suggested boiler drilling
Burner flange
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
RG1030/1040 2270 1720 1320 700
RG1030 RG1040Model Operation Code Price € Code Price €
G-.PR.S.IT.A PR 023050903 023051103G-.MD.S.IT.A MD(*) 023050904 023051104
LIGHT OIL
Type Model Overall dimensions* (mm)
A (AS)
A (AL)
AA AB AC AD AE B (BS)
B (BL)
BB C CC D E F G H K L M N O P RR SS UU W Y Z
RG1030 G-.xx.x.IT.A 1914 2108 377 1452 651 25 585 350 544 657 1564 680 1502 680 822 422 472 660 816 M16 651 460 460 265 80 142 1146 379 330RG1040 G-.xx.x.IT.A 1925 2119 377 1452 651 25 585 350 544 657 1575 680 1502 680 822 671 731 660 816 M16 651 460 460 265 80 142 1146 404 330
(*) Approximate values
milleser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
122
(*) Approximate values
Type Model Power kW Electric power Fan motor min. max. supply kW
Tecnopan G6 G-.TN.x.IT.B 29 70 230V 1N ac 0.1 Tecnopan G10 G-.TN.x.IT.B 58 116 230V 1N ac 0.15 Tecnopan G18 G-.TN.x.IT.B 105 209 230V 1N ac 0.18 Chef G5 G-.TN.S.IT.D 29 35 230V 1N ac 0.1 Chef G6 G-.TN.S.IT.D 29 70 230V 1N ac 0.1
This burners series has been produced to work on bakery and rotary ovens. The customers of this series are commercial kitchens, big hotels and restaurants. They feature the same main characteristics of the standard burners plus the possibility to manually decrease the output up to 40% on light oil burners, and up to 50% on gas burners.On the burner case we have installed an ON/OFF switch and a switch to regulate the output.These burners are equipped with a double protection shield and a blast tube in thermalsteel for high temperature operation.
Suggested boiler drilling
BURNERS FOR BAKERY OVENS AND KITCHENS
In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
G5 G6 G10 G18Model Operation Code Price € Code Price € Code Price € Code Price €
G-.TN.S.IT.B TN - 001050501 002050901 002051101G-.TN.L.IT.B TN - 001050601 002051001 002051201G-.TN.S.IT.D TN 001050701 001050801 - -
Burner flange
Type Model Overall dimensions* (mm) Burner flange* (mm)
Boiler drilling* (mm)
AS AL AD B BL C CL D G II L T min.
Z W K O H P M N
min. - max. min. max.G6 G-.TN.x.IT.B 345 455 12 53 - 67 53 - 177 278 - 292 278 - 402 310 Ø80 - 187 - 80 265 162 86 138 Ø101 112 M8 156G10 G-.TN.x.IT.B 351 471 14 81 201 270 270 342 Ø89 Ø105 221 17 80 311 160 120 134 Ø125 132 M8 187G18 G-.TN.x.IT.B 351 471 14 81 201 270 270 342 Ø115 - 221 17 80 311 160 120 134 Ø134 132 M8 187G5 G-.TN.x.IT.D 310 - 12 0 - 33 - 278 - 310 - 310 Ø80 - 187 - 80 265 162 86 138 Ø98 112 M8 156G6 G-.TN.x.IT.D 310 - 12 0 - 33 - 278 - 310 - 310 Ø80 - 187 - 80 265 162 86 138 Ø98 112 M8 156
Type Packaging dimensions* (mm)
l p h kgG6 360 300 560 15G10 420 340 630 18G18 420 340 630 18G5 360 300 560 15G6 360 300 560 15
(*) Approximate values
TECHNICAL DETAILS
tecnopan G6-G10-G18-chef G5-G6 LIGHT OIL
minif lamser ies
123
tecnopan G6-G10-G18-chef G5-G6LIGHT OIL
minif lamser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
124
G6-G10-G18 (24 Volt DC)
The originality of this new burner series is the electrical supply at 24V DC and they cover applications such as the cleaning of rubbish skips or streets. These burners are derived from the series made for bakery ovens and from these they take the sturdy construction that is mandatory in such working environments.The components of the light oil circuit are the same as the traditional burners of which they keep the same friendly user maintenance, the control box, the motor and the solenoid coils, are all suitable for use at 24 V DC. The burners are produced in three versions “On-Off” with a range from 29 to 209 kW. With this new series CIB UNIGAS wants to introduce a product suitable to this highly specific market.
G6 G10 G18Model Operation Code Price € Code Price € Code Price €
G-.TN.S.IT.Y TN 001052201 002053501 002053601G-.TN.L.IT.Y TN 001052301 002053701 002053801
Suggested boiler drilling
Burner flange
Type Packaging dimensions* (mm)
l p h kgG6 360 300 560 18G10 420 340 630 21G18 420 340 630 21
(*) Approximate values
Type Model Overall dimensions* (mm) Burner flange* (mm) Boiler drilling* (mm)
AS AL AD B BL C CL D E F G II L Tmin.
Z W K O H P M N
min. - max. min. max.G6 G-.TN.x.IT.Y 345 455 12 53 - 67 53 - 177 278 - 292 278 - 402 375 65 310 Ø80 - 187 - 80 265 162 86 138 Ø101 112 M8 156G10 G-.TN.x.IT.Y 351 471 14 81 201 270 270 375 33 342 Ø89 Ø105 221 17 80 311 160 120 134 Ø125 132 M8 187G18 G-.TN.x.IT.Y 351 471 14 81 201 270 270 375 33 342 Ø115 - 221 17 80 311 160 120 134 Ø134 132 M8 187
(*) Approximate values
Type Model Power kW Electric power Fan motor min. max. supply kW
G6 G-.TN.x.IT.Y 29 70 24V DC 0.11 G10 G-.TN.x.IT.Y 58 116 24V DC 0.18 G18 G-.TN.x.IT.Y 105 209 24V DC 0.18
TECHNICAL DETAILS
minif lamser ies
125
FILTERS
Description Code Price €
Filter 3⁄8” 0,06 PL 2.09.00.01 Filter 3⁄8” 0,1 P 2.09.00.25 Filter 1” 0,1 small 2.09.00.17 Filter 1” 0,1 big 2.09.00.18
MANOMETER
Description Code Price €
Glycerine gauge, 0 ÷ 40 bar (1⁄4” connection) 2.52.00.03
VACUUM GAUGE
Description Code Price €
Glycerine vacuum gauge, -1 ÷ 0 bar (1⁄4” connection) 2.52.00.08
SUPPORT FOR PRESSURE GAUGE
Description Code Price €
Isolating valve (1⁄4” connection) 2.52.00.05
Note: see on page 95 for modulation probes and accessories.
ACCESSORIES FOR LIGHT OIL BURNERS
126
h e a v y o i l b u r n e r s
miniflam seriesN18 - TN
tecnopress seriesPN30 - TN/ABPN60 - AB/PR/MD
PN70 - AB/PR/MDPN81 - AB/PR/MD
RN520
RN515 (from 1.628 to 4.884 kW
RN510 (from 1.314 to 3.953 kW)
PN92 (from 849 to 2.558 kW)
PN91 (from 698 to 2.093 kW)
PN91 (from 1.047 to 2.093 kW)
PN81 (from 264 to 1.900 kW)
PN70 (from 291 to 1.047 kW)
PN60 (from 151 to 791 kW)
PN60 (from 145 to 698 kW)
PN30 (from 105 to 383 kW)
PN30 (from 163 to 349 kW)
N18 (from 105 to 209 kW)
PBY1025
PBY1030
PBY1040
RN1025
RN1030
RN1040
PBY520
PBY525
PBY515 (fro
PBY510 (from 1.100 to 5.000 kW
PBY92 (from 700 to 3.000 kW)
PBY91 (from 500 to 2.500 kW)
PBY90
PBY70
(from 670 to 2.000 kW)
PN93 (from 550 to 4.100 kW)
RN525
(from 290 to 1.300 kW)
m e c h a n i c a l a t o m i z a t i o nmechanical atomizationnovanta - cinquecento series
PN91 - AB/PR/MDPN92 - PR/MDPN93 - PR/MD
RN510 - PR/MDRN515 - PR/MDRN520 - PR/MDRN525 - PR/MD
m e c h a n i c a l a t o m i z a t i o n
Type
127
tecnopress - novanta - cinquecento seriesPBY70 - ABPBY90 - PR/MDPBY91 - PR/MDPBY92 - PR/MD
PBY510 - PR/MDPBY515 - PR/MDPBY520 - PR/MDPBY525 - PR/MD
mille seriesRN1025 - PR/MDRN1030 - PR/MDRN1040 - PR/MD
(from 2.326 to 6.977 kW)
W)
(from 2.550 to 8.700 kW)
(from 1.800 to 7.300 kW)
(from 2.550 to 10.000 kW)
(from 2.550 to 8.700 kW)
(from 2.550 to 10.600 kW)
(from 2.550 to 13.000 kW)
(from 1.200 to 6.500 kW)
rom 1.200 to 6.000 kW)
W)
(from 2.000 to 8.000 kW)
(from 2.550 to 13.000 kW)
mechanical atomization p n e u m a t i c a t o m i z a t i o nmille seriesPBY1025 - PR/MDPBY1030 - PR/MDPBY1040 - PR/MD
pneumat ic atomizat ion
128
The burner, in its standard version, is suitable to burn oil with max viscosity of 110 cSt at 50°C (15°E at 50°C).The oil heater consists of a tank with an electric element, a system of preset thermostats control the regulation of the fuel temperature in order to ensure the optimum performance of the fuel used.The burner is provided with a cover to protect the internal components which is easily removable for maintenance purposes. The links to the electrical supply line and to the temperature regulators are quite easy and safe thanks to pre-wired connectors.Upon request we can supply the components necessary to ensure the oil supply line complies with UNI 9248.
N18 TN
HEAVY OILN18MECHANICAL ATOMIZATION
minif lamser iesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
129
Burnerflange* (mm)
TECHNICAL DETAILS
In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
N18
Type Model Power kW Electric power Fan motor Resistor min. max. supply kW kW
N18 N-.TN.S.IT.A 105 209 230/400 V 3N ac 0.55 1.5
Model Operation Code Price €
HEAVY OIL 50 cSt at 50°C (7°E - 50°C) N-.TN.S.IT.A TN 002060201 HEAVY OIL 110 cSt at 50°C (15°E - 50°C) E-.TN.S.IT.A TN 002150201
(*) Approximate values
Type Model Overall dimensions* (mm) Boiler drilling* (mm)
A B C D E G L H M N P K O l p h kg min max
N18 N-.TN.S.IT.A 400 69÷201 600 480 300 126 270 133 M8 171 121 160 103 130 800 750 560 59
N18HEAVY OIL
Suggested boiler drilling
Burner flange
Packagingdimensions* (mm)
minif lamser ies
130
PN81 AB-PR-MDPN70 AB-PR-MD
PN60 PR-MDPN60 ABPN30 ABPN30 TN
Thanks to CIB UNIGAS’s thirty years experience in the design and production of oil burners, we produce a highly technical series of products renowned worldwide for their reliability.These burners are available for o i ls wi th s tandard viscosity up to 110 cSt at 50°C (15°E at 50°C).Upon request we can also supply a model for heavy oils up to 400 cSt at 50°C (50°E at 50°C).The oil heater consists of a tank with an electric element, a system of preset thermostats control the regulation of the fuel temperature in order to ensure the optimum performance of the fuel used.Upon request we can supply the components necessary to ensure the oil supply line complies with UNI 9248.
HEAVY OIL
MECHANICAL ATOMIZATION
PN30-PN60-PN70-PN81tecnopress ser ies
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
131
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Resistor min. max. supply kW kW
PN30 x-.TN.x.IT.A 163 349 230/400 V 3N ac 0.75 2.4 PN30 x-.AB.x.IT.A 105 383 230/400 V 3N ac 0.75 2.4 PN60 x-.AB.x.IT.A 145 698 230/400 V 3N ac 1.1 4.5 PN60 x-.xx.x.IT.A 151 791 230/400 V 3N ac 1.1 4.5 PN70 x-.xx.x.IT.A 291 1.047 230/400 V 3N ac 2.2 8 PN81 x-.xx.x.IT.A 264 1.900 230/400 V 3N ac 3 12
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95 and 147) In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
(*) Approximate values
PN70 - PN81PN30 - PN60
PN30-PN60-PN70-PN81HEAVY OIL
Suggested boiler drilling
Suggested boiler drilling
Burner flange
Burner flange
Type Model Overall dimensions * (mm)
AS AL AA BS BL BB C CC D E F G H K L M N O P T W Y Z
min. maxPN30 x-.xx.x.IT.A 670 860 150 340 520 720 270 450 121 151 190 400 M10 219 155 155 155 131PN60 x-.AB.x.IT.A 864 1062 102 244 442 274 620 365 660 330 330 153 182 240 400 M10 269 190 190 190 92 520 162 120PN60 x-.PR.x.IT.A 1051 1186 102 324 459 274 727 365 861 365 496 208 238 240 344 M10 269 190 190 190 92 613 162 120PN70 x-.AB.x.IT.A 1106 1256 138 407 557 373 699 376 871 360 511 220 250 300 475 M10 330 216 250 233 14 630 198 155PN70 x-.PR.x.IT.A 1244 1394 138 407 557 373 837 376 871 360 511 220 250 300 475 M10 330 216 250 233 14 630 198 155PN81 x-.AB.x.IT.A 1080 1230 138 340 490 373 699 376 903 392 511 234 264 300 376 M10 330 216 250 233 14 587 198 155PN81 x-.PR.x.IT.A 1239 1389 138 340 490 373 837 376 903 392 511 234 264 300 376 M10 330 216 250 233 14 598 198 155
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
PN30 1180 930 720 90 PN60 1210 1020 790 130 PN70/81 1580 1010 860 170
PN30 PN60 PN70 PN81Model Operation Code Price € Code Price € Code Price € Code Price €
HEAVY OIL 50 cSt at 50°C (7°E - 50°C)N-.TN.S.IT.A TN 003060101 - - -N-.TN.L.IT.A TN 003060201 - - -N-.AB.S.IT.A AB 003060102 004060102 008060102 008060502N-.AB.L.IT.A AB 003060202 004060202 008060202 008060602N-.PR.S.IT.A PR - 004060103 008060103 008060503N-.PR.L.IT.A PR - 004060203 008060203 008060603N-.MD.S.IT.A MD(*) - 004060104 008060104 008060504N-.MD.L.IT.A MD(*) - 004060204 008060204 008060604HEAVY OIL 110 cSt at 50°C (15°E - 50°C)E-.TN.S.IT.A TN 003150101 - - -E-.TN.L.IT.A TN 003150201 - - -E-.AB.S.IT.A AB 003150102 004150102 008150102 008150502E-.AB.L.IT.A AB 003150202 004150202 008150202 008150602E-.PR.S.IT.A PR - 004150103 008150103 008150503E-.PR.L.IT.A PR - 004150203 008150203 008150603E-.MD.S.IT.A MD(*) - 004150104 008150104 008150504E-.MD.L.IT.A MD(*) - 004150204 008150204 008150604
tecnopress ser ies
132
HEAVY OILPN30-PN60-PN70-PN81tecnopress ser ies
OUTPUT (kW) Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW) Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
133
These a lumin ium monoblock industrial burners with integral fan are available for oils with viscosity up to 110 cSt at 50°C (15°E at 50°C).Upon request we can also supply a model for heavy oils up to 400 cSt at 50°C (50°E at 50°C).Given the particular viscosity of the fuel and the need to keep the oil fluid, the burner uses a preheating system provided with a much lower thermal load electrical element in order to avoid carbon deposits.The maintenance is always easy as the components - for example the solenoid valve group - is mounted on a specific bracket which can be easily removed.
PN93 PR-MDPN92 PR-MDPN91 PR-MD
PN91 AB
RN520 PR-MDRN525 PR-MD
RN515 PR-MDRN510 PR-MD
HEAVY OIL
MECHANICAL ATOMIZATION
PN91-PN92-PN93-RN510-RN515-RN520-RN525novanta-cinquecentoser ies
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
134
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Resistor min. max. supply kW kW kW PN91 x-.AB.x.IT.A 1.047 2.093 230/400 V 3N ac 4 - 12 PN91 x-.xx.x.IT.A 698 2.093 230/400 V 3N ac 4 - 18 PN92 x-.xx.x.IT.A 849 2.558 230/400 V 3N ac 5.5 - 18 PN93 x-.xx.x.IT.A 550 4.100 230/400 V 3N ac 7.5 - 24
HEAVY OILPN91-PN92-PN93-RN510-RN515-RN520-RN525
Suggested boiler drilling
Burner flange
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
PN91/92/93 1730 1280 1020 290
Type Model Overall dimensions * (mm)
AS AL AA BS BL BB C CC D DD E F G H K L M N O P T W Y Z
min. maxPN91 x-.xx.x.IT.A 1315 1505 157 298 488 419 918 532 1052 356 532 520 262 292 360 464 M12 417 280 310 295 45 722 228 185PN92 x-.xx.x.IT.A 1318 1508 157 301 491 419 918 532 1052 356 532 520 292 322 360 464 M12 417 280 310 295 45 722 228 185PN93 x-.xx.x.IT.A 1318 1508 157 301 491 460 918 532 1052 356 532 520 292 322 360 464 M12 417 280 310 295 45 722 228 185
(*) Approximate values
novanta-cinquecentoser ies
135
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Resistor min. max. supply kW kW kW RN510 x-.xx.x.IT.A 1.314 3.953 230/400 V 3N ac 7.5 1.1 24 RN515 x-.xx.x.IT.A 1.628 4.884 230/400 V 3N ac 11 1.5 12 + 18 RN520 x-.xx.x.IT.A 2.326 6.977 230/400 V 3N ac 15 2.2 18 + 24 RN525 x-.xx.x.IT.A 2.000 8.000 400 V 3N ac 18.5 2.2 24 + 24
HEAVY OIL PN91-PN92-PN93-RN510-RN515-RN520-RN525
Suggested boiler drilling
Burner flange
Type Model Overall dimensions * (mm)
A (AS)
A (AL)
AA AB AC AD B (BS)
B (BL)
BB C CC D DD E EE F G H K L M N O P T UU W Y Z
RN510 x-.xx.x.IT.A 1502 1682 221 217 246 35 350 530 468 1152 571 1286 349 643 556 643 345 385 540 496 M14 552 390 390 37 36 897 328 270RN515 x-.xx.x.IT.A 1502 1682 145 217 246 35 350 530 508 1152 598 1286 - 643 - 643 384 424 540 496 M14 552 390 390 37 36 802 328 270RN520 x-.xx.x.IT.A 1502 1682 145 207 250 35 350 530 508 1152 598 1286 - 643 - 643 422 472 540 496 M14 552 390 390 37 36 802 328 270RN525 x-.xx.x.IT.A 1502 1682 145 197 275 35 350 530 650 1152 598 1286 - 643 - 643 434 484 540 496 M14 552 390 390 37 78 844 328 270
(*) Approximate values
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
RN510/515/520 1720 1500 1150 410 RN525 1800 1500 1300 430
novanta-cinquecentoser ies
136
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95 and 147)In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE Microprocessor-controlled burners (see page 82).
HEAVY OILPN91-PN92-PN93-RN510-RN515-RN520-RN525
PN91 PN92 PN93Model Operation Code Price € Code Price € Code Price €
HEAVY OIL 50 cSt at 50°C (7°E - 50°C)N-.AB.S.IT.A AB 012060302 - -N-.AB.L.IT.A AB 012060402 - -N-.PR.S.IT.A PR 012060303 012060503 012061403N-.PR.L.IT.A PR 012060403 012060603 012061503N-.MD.S.IT.A MD(*) 012060304 012060504 012061404N-.MD.L.IT.A MD(*) 012060404 012060604 012061504HEAVY OIL 110 cSt at 50°C (15°E - 50°C)E-.AB.S.IT.A AB 012150302 - -E-.AB.L.IT.A AB 012150402 - -E-.PR.S.IT.A PR 012150303 012150503 012151403E-.PR.L.IT.A PR 012150403 012150603 012151503E-.MD.S.IT.A MD(*) 012150304 012150504 012151404E-.MD.L.IT.A MD(*) 012150404 012150604 012151504
RN510 RN515 RN520 RN525Model Operation Code Price € Code Price € Code Price € Code Price €
HEAVY OIL 50 cSt at 50°C (7°E - 50°C)N-.PR.S.IT.A PR 029060103 029060303 029060503 029060703N-.PR.L.IT.A PR 029060203 029060403 029060603 029060803N-.MD.S.IT.A MD(*) 029060104 029060304 029060504 029060704N-.MD.L.IT.A MD(*) 029060204 029060404 029060604 029060804HEAVY OIL 110 cSt at 50°C (15°E - 50°C)E-.PR.S.IT.A PR 029150103 029150303 029150503 029150703E-.PR.L.IT.A PR 029150203 029150403 029150603 029150803E-.MD.S.IT.A MD(*) 029150104 029150304 029150504 029150704E-.MD.L.IT.A MD(*) 029150204 029150404 029150604 029150804
novanta-cinquecentoser ies
137
RN510 PR-MD RN515 PR-MD
RN525 PR-MDRN520 PR-MD
HEAVY OIL PN91-PN92-PN93-RN510-RN515-RN520-RN525novanta-cinquecentoser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
138
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000
RN1030 PR-MDRN1040 PR-MD
These aluminium monoblock industrial burners with integral fan are available for oils with viscosity up to 110 cSt at 50°C (15°E at 50°C).Upon request we can also supply a model for heavy oils up to 400 cSt at 50°C (50°E at 50°C).These burners use a mechanical atomization system and, given the particular viscosity of the fuel, they are equipped with two preheating tanks provided with electric elements to keep the oil fluid.The elements are electrically rated to avoid carbon deposits.On this version ignition is an independent pilot working with either natural gas or LPG.The burners main features are the relationship between the combustion head and blast tube, and the specific fan guide that allows maximum exploitation of the fan performance. Like all other UNIGAS burners this one is highly reliable and fully compliant thanks to constant tests carried out in our laboratory.
HEAVY OILRN1030-RN1040MECHANICAL ATOMIZATION
milleser iesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
139
TECHNICAL DETAILS
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95 and 147)In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Microprocessor-controlled burners (see page 82)
Type Model Power kW Electric power Fan motor Pump motor Resistor min. max. supply kW kW kW
RN1030 x-.xx.x.IT.A 2.550 10.600 400 V 3N ac 22 5.5 24+24 RN1040 x-.xx.x.IT.A 2.550 13.000 400 V 3N ac 30 5.5 24+24
(*) Approximate values
HEAVY OIL RN1030-RN1040
Suggested boiler drilling
Burner flange
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
RN1030/1040 2270 1720 1320 800
RN1030 RN1040Model Operation Code Price € Code Price €
HEAVY OIL 50 cSt at 50°C (7°E - 50°C)N-.PR.S.IT.A PR 023061603 023061803N-.PR.L.IT.A PR 023061703 023061903N-.MD.S.IT.A MD 023061604 023061804N-.MD.L.IT.A MD 023061704 023061904HEAVY OIL 110 cSt at 50°C (15°E - 50°C)E-.PR.S.IT.A PR 023151603 023151803E-.PR.L.IT.A PR 023151703 023151903E-.MD.S.IT.A MD 023151604 023151804E-.MD.L.IT.A MD 023151704 023151904
Type Model Overall dimensions* (mm)
A (AS)
A (AL)
AA AD B (BS)
B (BL)
BB C CC D E F G H K L M N O P RR SS UU W Y Z
RN1030 x-.xx.x.IT.A 1818 2012 377 25 350 544 657 1468 680 1502 680 822 422 472 660 816 M16 651 460 460 265 80 142 1146 379 330RN1040 x-.xx.x.IT.A 1925 2119 377 25 350 544 657 1575 680 1502 680 822 671 731 660 816 M16 651 460 460 265 80 142 1146 404 330
milleser ies
140
This particular heavy oil burners series has been developed in order to use compressed air or, alternatively, steam as a fluid to atomize the fuel which gives better combustion results when compared to the traditional atomizing systems.These burners are provided with a low pressure nozzle which allows consumption levels to be kept low, but, above all limits the general wear of the whole atomization system.All burners are progressive, and are complete with electrical control cabinet, pump set to be installed separately by the final user, and the nozzle performs an automatic cleaning process at the end of each cycle.The plant must be provided with compressed air or steam at 8 bar. Burners are ignited through a pilot which can works both with natural gas or LPG and are suitable to be used with fuels up to 4000 cSt at 50°C (530°E at 50°C).The standard burner is set up to atomize only with compressed air, when steam is requested for atomization, the burner will be modified through a specific kit. Compressed air must, however, always be present at the burner in the following cases:- cold start ups when no steam is available- valve opening for automatic nozzle cleaning
HEAVY OILPBY70-PBY90-PBY91-PBY92-PBY510-PBY515-PBY520-PBY525PNEUMATIC ATOMIZATION
0
2
4
6
8
10
12
14
16
18
20
22
0 1000 2000 3000 4000 5000 6000 7000 8000
PBY520 PR-MDPBY525 PR-MD
PBY515 PR-MDPBY510 PR-MDPBY92 PR-MDPBY91 PR-MD
PBY70 ABPBY90 PR-MD
tecnopress-novanta-cinquecentoser iesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
141
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Resistor min. max. supply kW kW kW PBY70 H-.AB.S.IT.A 290 1.300 230/400 V 3N ac 2.2 0.75 4.5 PBY90 H-.xx.S.IT.A 670 2.000 230/400 V 3N ac 3 0.75 8 PBY91 H-.xx.S.IT.A 500 2.500 230/400 V 3N ac 4 0.75 8 PBY92 H-.xx.S.IT.A 700 3.000 230/400 V 3N ac 5.5 0.75 12
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95 and 147) In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Microprocessor-controlled burners (see page 82)
HEAVY OIL PBY70-PBY90-PBY91-PBY92-PBY510-PBY515-PBY520-PBY525
Suggested boiler drilling
Burner flange
(*) Approximate values
Type Model Overall dimensions * (mm)
A AA AD AH AI BS BB C CC D E F G H K L M N O P RR SS T TT UU W Y Z
min. maxPBY70 H-.AB.S.IT.A 1050 138 - 146 171 310 373 740 381 772 381 391 198 220 300 376 M10 330 216 250 233 100132 41 - 150730198155PBY90 H-.PR.S.IT.A 1258 237 35 250 479 294 419 964 532 992 532 460 246 276 360 464 M12 417 280 310 295 105 60 43 504 34 693 228 180PBY91 H-.PR.S.IT.A 1262 237 35 250 479 298 419 964 532 992 532 460 262 292 360 464 M12 417 280 310 295 105 60 43 504 34 693 228 180PBY92 H-.PR.S.IT.A 1265 237 35 250 479 301 419 964 532 992 532 460 292 322 360 464 M12 417 280 310 295 105 60 43 504 34 693 228 180
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
PBY70 1280 850 800 150 PBY90/91/92 1730 1280 1020 330
PBY70 PBY90 PBY91 PBY92Model Operation Code Price € Code Price € Code Price € Code Price €
HEAVY OIL 4000 cSt at 50°C (530°E - 50°C)
H-.AB.S.IT.A AB 008180802 - - -H-.PR.S.IT.A PR - 012180903 012181003 012181103H-.MD.S.IT.A MD(*) - 012180904 012181004 012181104
tecnopress-novanta-cinquecentoser ies
142
TECHNICAL DETAILS
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95 and 147) In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Microprocessor-controlled burners (see page 82)
(*) Approximate values
HEAVY OIL
Suggested boiler drilling
Burner flange
Type Model Overall dimensions * (mm)
A (AS)
A (AL)
AA AD AH AI B (BS)
B (BL)
BB C CC D E F G H K L M N O P RR SS T TT W Y Z
PBY510 H-.xx.x.IT.A 1408 1588 219 35 265 448 350 530 468 1058 571 1072 571 501 345 385 540 498 M14 552 390 390 109 115 44 547 827 245 270PBY515 H-.xx.x.IT.A 1408 1588 219 35 265 448 350 530 508 1058 571 1072 571 501 384 424 540 498 M14 552 390 390 109 115 44 547 827 276 270PBY520 H-.xx.x.IT.A 1408 1588 219 35 265 448 350 530 508 1058 571 1072 571 501 422 472 540 498 M14 552 390 390 109 115 44 547 827 300 270PBY525 H-.xx.x.IT.A 1408 1588 219 35 265 448 350 530 642 1058 571 1142 642 501 422 472 540 498 M14 552 390 390 109 115 44 547 827 300 270
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
PBY510/515/520 1730 1430 1130 410 PBY525 1730 1430 1130 430
Type Model Power kW Electric power Fan motor Pump motor Resistor min. max. supply kW kW kW PBY510 H-.xx.S.IT.A 1.100 5.000 230/400 V 3N ac 7.5 0.75 18 PBY515 H-.xx.S.IT.A 1.200 6.000 230/400 V 3N ac 11 0.75 18 PBY520 H-.xx.S.IT.A 1.200 6.500 230/400 V 3N ac 15 0.75 24 PBY525 H-.xx.S.IT.A 1.800 7.300 400 V 3N ac 18.5 0.75 24
PBY70-PBY90-PBY91-PBY92-PBY510-PBY515-PBY520-PBY525
PBY510 PBY515 PBY520 PBY525Model Operation Code Price € Code Price € Code Price € Code Price €
HEAVY OIL 4000 cSt at 50°C (530°E - 50°C)H-.PR.S.IT.A PR 013180703 013180803 013180903 013181903H-.PR.L.IT.A PR 013182003 013182103 013182203 013182303H-.MD.S.IT.A MD 013180704 013180804 013180904 013181904H-.MD.L.IT.A MD 013182004 013182104 013182204 013182304
tecnopress-novanta-cinquecentoser ies
143
0
2
4
6
8
10
12
14
16
600 1000 1400 1800 2200 2600 3000
0
4
8
12
16
20
1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 0
4
8
12
16
20
1000 2000 3000 4000 5000 6000
0
4
8
12
16
20
1000 2000 3000 4000 5000 6000 7000
0
4
8
12
16
20
1000 2000 3000 4000 5000 6000 7000
PBY70 AB
HEAVY OIL PBY70-PBY90-PBY91-PBY92-PBY510-PBY515-PBY520-PBY525tecnopress-novanta-cinquecentoser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
144
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000
PBY1030 PR-MDPBY1040 PR-MD
PBY1025 PR-MD
Just like the corresponding series NOVANTA-CINQUECENTO, these oil burners - up to 4000 cSt at 50°C (530°E at 50°C) - including emulsified oils, were developed in order to use compressed air or, when required, steam as a means of atomization in order to achieve better combustion results compared to the traditional atomization systems.These burners are provided with a low pressure nozzle which allows consumption levels to be kept low, but, above all limits the general wear of the whole atomization system.All burners are progressive, and are complete with electrical control cabinet, pump set to be installed separately by the final user, and the nozzle performs an automatic cleaning process at the end of each cycle.The standard burner is set up to atomize with compressed air only, when steam is requested for atomization, the burner will be modified through a specific kit. Air, or steam, must be present at the burner at a pressure from 6 to 10 bar. Burners are ignited through a pilot that can operate both with natural gas or LPG.
HEAVY OILPBY1025-PBY1030-PBY1040PNEUMATIC ATOMIZATION
milleser iesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
145
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Resistor min. max. supply kW kW kW PBY1025 H-.xx.x.IT.A 2.550 8.700 400 V 3N ac 18.5 0.75 24 PBY1030 H-.xx.x.IT.A 2.550 10.000 400 V 3N ac 22 1.1 18+18 PBY1040 H-.xx.x.IT.A 2.550 13.000 400 V 3N ac 30 1.1 18+18
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, page 95 and 147)In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Microprocessor-controlled burners (see page 82)
(*) Approximate values
HEAVY OIL PBY1025-PBY1030-PBY1040
Suggested boiler drilling
Burner flange
Type Model Overall dimensions * (mm)
A (AS)
A (AL)
AA AD AH AI AM B(BS)
B (BL)
BB C CC D E F G H K L M N O P RR SS T W Y Z
PBY1025 H-.xx.x.IT.A 1758 1952 377 25 304 404 584 350 544 641 1408 680 1312 680 632 422 472 660 815 M16 651 460 460 265 80 49 1145 379 330PBY1030 H-.xx.x.IT.A 1707 1952 377 25 138 608 589 299 544 657 1408 680 1312 680 632 474 524 660 815 M16 651 460 460 265 80 49 1145 400 330PBY1040 H-.xx.x.IT.A - 1981 377 25 138 608 589 - 573 657 1408 680 1312 680 632 671 731 660 815 M16 651 460 460 265 80 49 1145 400 330
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
PBY1025/1030/1040 2280 1730 1360 850
PBY1025 PBY1030 PBY1040Model Operation Code Price € Code Price € Code Price €
HEAVY OIL 4000 cSt at 50°C (530°E - 50°C)H-.PR.S.IT.A PR 023180303 023180403 023180703H-.PR.L.IT.A PR 023181103 023181203 023181303H-.MD.S.IT.A MD 023180304 023180404 023180704H-.MD.L.IT.A MD 023181104 023181204 023181304
milleser ies
146
HEAVY OILPBY1025-PBY1030-PBY1040
PBY 1040 PR-MD
0
5
10
15
20
25
2000 4000 6000 8000 10000 12000 14000
milleser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
147
FILTERS
Description Code Price €
Filter 1” 0,3 small 2.09.02.02 Filter 1” 0,3 big 2.09.02.07
VACUUM GAUGE
Description Code Price €
Glycerine vacuum gauge -1 ÷ 0 bar (1⁄4” connection) 2.52.00.08
SUPPORT FOR PRESSURE GAUGE
Description Code Price €
Isolating valve (1⁄4” connection) 2.52.00.05
MANOMETER
Description Code Price €
Glycerine gauge 0 ÷ 6 bar (1⁄4” connection) 2.52.00.35 Glycerine gauge 0 ÷ 10 bar (1⁄4” connection) 2.52.00.36 Glycerine gauge 0 ÷ 16 bar (1⁄4” connection) 2.52.00.33 Glycerine gauge 0 ÷ 25 bar (1⁄4” connection) 2.52.00.34 Glycerine gauge 0 ÷ 40 bar (1⁄4” connection) 2.52.00.19
Note: see on page 95 for modulation probes and accessories.
Prices on request for:
- Pre heating units for heavy oil- Pumping units for heavy oil- Degassing tank
ACCESSORIES FOR HEAVY OIL BURNERS
148
d u a l f u e l b u r n e r s g a s / l i g h t o i l
miniflam seriesHS5 - TNHS10 - TNHS18 - TN
tecnopress seriesHP20 - AB/PR/MDHP30 - AB/PR/MDHP60 - PR/MD
HP72 - PR/MDHR73A - PR/MD
HS5
HS10
HS18
HP20
HP30
HP60
HP72
HR73A
HR91A
HR92A
HR512A
HR515A
HR520A
HR525A
HR1025
HR1030
HR1030
HR1040
(from 600
(from 480 to 3.050 kW)
(from 480 to 2.670 kW)
(from 320 to 2.300 kW)
(from 330 to 1.200 kW)
(from 170 to 880 kW)
(from 65 to 350 kW)
(from 85 to 230 kW)
(from 80 to 200 kW)
(from 65 to 140 kW)
(from 35 to 70 kW)
HP72 (from 330 to 1.550 kW)
HR93A (from 550 to 4.100 k
Type
149
novanta - cinquecento seriesHR91A - PR/MDHR92A - PR/MDHR93A - PR/MD
HR512A - PR/MDHR515A - PR/MDHR520A - PR/MDHR525A - PR/MD
(from 2.550 to 10.600 kW)
(from 2.550 to 13.000 kW)
(from 2.550 to 9.500 kW)
(from 2.550 to 8.700 kW)
(from 2.000 to 8.000 kW)
(from 1.000 to 6.400 kW)
(from 770 to 5.200 kW)
to 4.500 kW)
kW)
mille seriesHR1025 - PR/MDHR1030 - PR/MDHR1040 - PR/MD
150
This small output series can work both with gas and light oil according to the fuel availability on the plant.Of course all mechanisms have been carefully studied to give the max efficiency and are perfectly compatible to work with gas and liquid fuels; in fact fuel change over is simply achieved by a single electrical switch which prompts the burner to carry out a controlled shutdown.The high perfomance fuel pump is driven by a separate motor running only when oil firing is selected. Moreover, thanks to its small dimensions, this series is particularly suitable to a quick maintenance. The burner’s feature: an housing made in aluminium die-cast, the cover can be easily taken off, a grill on the air inlet prevents any foreign object being drawn into the fan. The combustion head can be adjusted by means of a graduated screw.
HS5 TN
HS10 TN
HS18 TN
GAS/LIGHT OILHS5-HS10-HS18
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
minif lamser ies
151
Burnerflange* (mm)
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Gas connections min. max. supply kW kW Rp
HS5 MG.TN.x.IT.A.0.15 35 70 230V 1N ac 0.1 0.1 1⁄2” HS10 MG.TN.x.IT.A.0.20 65 140 230V 1N ac 0.15 0.1 3⁄4” HS18 MG.TN.x.IT.A.0.25 80 200 230V 1N ac 0.15 0.1 1”
In compliance with DIRECTIVE 2009/142/CEIn compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Type Model Overall dimensions* (mm) Boiler drilling* (mm) A B BL C CL D G L H P M N K O min max min max
HS5 MG.TN.x.IT.A.0.15 320 0÷61 0÷160 380 480 400 80 190 90 92 134 M8 130÷189 162 86 138 HS10 MG.TN.x.IT.A.0.20 351 159 254 510 605 430 108 210 115 105 134 M8 148÷189 162 103 103 HS18 MG.TN.x.IT.A.0.25 348 177 267 525 615 430 126 210 135 105 134 M8 148÷189 162 103 103
(*) Approximate values
For the configuration of the gas train, see pages 98-99.
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
HS5 580 580 360 23 HS10 510 350 730 30 HS15 510 350 730 31
GAS/LIGHT OIL HS5-HS10-HS18
Suggested boiler drilling
Burner flange
HS5 HS10 HS18Model Gas train Operation Code Price € Code Price € Code Price €
MG.TN.S.IT.A.0.15 ½” TN 001070141 - -MG.TN.L.IT.A.0.15 ½” TN 001070241 - -MG.TN.S.IT.A.0.20 ¾” TN - 002070141 -MG.TN.L.IT.A.0.20 ¾” TN - 002070241 -MG.TN.S.IT.A.0.25 1” TN - - 002070341MG.TN.L.IT.A.0.25 1” TN - - 002070441
minif lamser ies
152
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure.To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
GAS/LIGHT OILHS5-HS10-HS18
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
minif lamser ies
153
HR73A PR-MD
HP20 AB-PR-MD
HP30 AB-PR-MD
HP60 PR-MD
HP72 PR-MD..0.xx
HP72 PR-MD..1.xx
These burners are characterized by the “spiral” line typical of the series TECNOPRESS. They are suitable both for big and for small outputs up to 2300 kW. Moreover they are suitable to burn either natural gas or light oil thanks to the adjustable combustion head which allows a good performance with both fuels. The control panel facia is printed with a mimic diagram fitted with neon lamps to indicate the different stages of the burner operation. Like all other models, they can work with standard and long blast tube. If the blast tube is shorter than the standard one, a spacer is available to adjust the insertion length into the combustion chamber. All regulations and settings devices are simple and practical for both fuels thanks to high quality leverages.
GAS/LIGHT OIL HP20-HP30-HP60-HP72-HR73A
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
tecnopress ser ies
154
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Gas connections min. max. supply kW kW
HP20 MG.xx.x.IT.A.0.25 85 230 230V 1N ac 0.37 0.1 1” HP30 MG.xx.S.IT.A.0.xx 65 350 230V 1N ac 0.37 0.1 1”1/4 - 1”1/2 HP60 MG.xx.S.IT.A.0.xx 170 880 230/400V 3N ac 1.1 0.55 1”1/2 - 2” - DN65 HP72 MG.xx.S.IT.A.0.xx 330 1200 230/400V 3N ac 2.2 0.55 2” - DN65 - 80 HP72 MG.xx.S.IT.A.1.xx 330 1550 230/400V 3N ac 2.2 0.55 2” - DN65 - 80 HR73A MG.xx.S.IT.A.1.xx 320 2300 230/400V 3N ac 3 0.55 2” - DN65 - 80
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
HP20/HP30 980 820 580 70 HP60 1280 850 760 90 HP72/HR73A 1280 850 760 145
For the configuration of the gas train, see pages 98-99.
HP20 - HP30 - HP60 HP72 - HR73A
GAS/LIGHT OILHP20-HP30-HP60-HP72-HR73A
Suggested boiler drilling
Burner flangeSuggested boiler drilling
Burner flange
Type Model Overall dimensions * (mm)
AS AL AA BS BL BB C CC D E F G H J K L M N O P Q R S U V W Y Z
min maxHP20 MG.xx.x.IT.A.0.25 728 813 - 173 258 - 555 - 830 510 320 126 151 178 190 290 M10 219 155 155 155 - - - 360 - - 115 -HP30 MG.xx.S.IT.A.0.xx 855 - - 300 - - 555 - 830 510 320 142 162 178 190 290 M10 219 155 155 155 - - - 360 - - 233 -HP60 MG.xx.S.IT.A.0.40 1119 - 99 383 - 314 736 362 930 500 430 240 280• 210 240 344 M10 269 190 190 190 445 112 327 444 - 464 162 120HP60 MG.xx.S.IT.A.0.50 1119 - 99 383 - 314 736 362 930 500 430 240 280• 210 240 344 M10 269 190 190 190 445 112 335 444 - 464 162 120HP60 MG.xx.S.IT.A.0.65 1119 - 99 383 - 314 736 362 1115 685 430 240 280• 250 240 420 M10 269 190 190 190 845 112 403 540 313 540 162 120HP72 MG.xx.S.IT.A.0.50 1299 - 139 505 - 373 794 382 1022 568 454 300 340• 208 300 376 M10 330 216 250 233 465 130 335 519 - 531 198 155HP72 MG.xx.S.IT.A.0.65 1299 - 139 505 - 373 794 382 1120 666 454 300 340• 275 300 393 M10 330 216 250 233 533 130 403 565 313 548 198 155HP72 MG.xx.S.IT.A.0.80 1299 - 139 505 - 373 794 382 1120 666 454 300 340• 275 300 407 M10 330 216 250 233 574 130 444 565 344 562 198 155HP72 MG.xx.S.IT.A.1.50 1299 - 139 505 - 373 794 382 1148 694 454 300 340• 208 300 376 M10 330 216 250 233 465 130 335 519 - 531 198 155HP72 MG.xx.S.IT.A.1.65 1299 - 139 505 - 373 794 382 1226 772 454 300 340• 275 300 393 M10 330 216 250 233 533 130 403 565 313 548 198 155HP72 MG.xx.S.IT.A.1.80 1299 - 139 505 - 373 794 382 1228 774 454 300 340• 275 300 407 M10 330 216 250 233 574 130 444 565 344 562 198 155HR73A MG.xx.S.IT.A.1.50 1294 - 139 500 - 373 794 382 1026 694 332 234 264 208 300 376 M10 330 216 250 233 465 130 335 519 - 531 198 155HR73A MG.xx.S.IT.A.1.65 1294 - 139 500 - 373 794 382 1104 772 332 234 264 275 300 393 M10 330 216 250 233 533 130 403 565 313 548 198 155HR73A MG.xx.S.IT.A.1.80 1294 - 139 500 - 373 794 382 1106 774 332 234 264 275 300 407 M10 330 216 250 233 574 130 444 565 344 562 198 155
(*) Approximate values (•) Install a counter-flange between the burner and the boiler or in alternative, drill the H hole smaller but higher than the Y point and assemble the blast tube inside the boiler
tecnopress ser ies
155
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, pages 95 and 167)■ = Burner equipped with external air inlet
In compliance with DIRECTIVE 2009/142/CEIn compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Microprocessor-controlled burners (see page 82)
GAS/LIGHT OIL HP20-HP30-HP60-HP72-HR73A
HP60 HP72 HR73AModel Gas train Operation Code Price € Code Price € Code Price €
MG.PR.S.IT.A.0.40 1”½ PR 004070143 - -MG.PR.S.IT.A.0.50 2” PR 004070243 008070143 -MG.PR.S.IT.A.0.65 DN65 PR 004070343 008070243 -MG.PR.S.IT.A.0.80 DN80 PR - 008070343 -MG.PR.S.IT.A.1.50 ■ 2” PR - 008070153 008071753MG.PR.S.IT.A.1.65 ■ DN65 PR - 008070253 008071853MG.PR.S.IT.A.1.80 ■ DN80 PR - 008070353 008071953MG.MD.S.IT.A.0.40 1”½ MD(*) 004070144 -MG.MD.S.IT.A.0.50 2” MD(*) 004070244 008070144MG.MD.S.IT.A.0.65 DN65 MD(*) 004070344 008070244MG.MD.S.IT.A.0.80 DN80 MD(*) - 008070344MG.MD.S.IT.A.1.50 ■ 2” MD(*) - 008070154 008071754MG.MD.S.IT.A.1.65 ■ DN65 MD(*) - 008070254 008071854MG.MD.S.IT.A.1.80 ■ DN80 MD(*) - 008070354 008071954
HP20 HP30Model Gas train Operation Code Price € Code Price €
MG.AB.S.IT.A.0.25 1” AB 003070142 -MG.AB.L.IT.A.0.25 1” AB 003070242 -MG.PR.S.IT.A.0.25 1” PR 003070143 -MG.PR.L.IT.A.0.25 1” PR 003070243 -MG.MD.S.IT.A.0.25 1” MD(*) 003070144 -MG.MD.L.IT.A.0.25 1” MD(*) 003070244 -MG.AB.S.IT.A.0.32 1”1/4 AB - 003070342MG.AB.S.IT.A.0.40 1”1/2 AB - 003070542MG.PR.S.IT.A.0.32 1”1/4 PR - 003070343MG.PR.S.IT.A.0.40 1”1/2 PR - 003070543MG.MD.S.IT.A.0.32 1”1/4 MD(*) - 003070344MG.MD.S.IT.A.0.40 1”1/2 MD(*) - 003070544
tecnopress ser ies
156
HP20 AB-PR-MD HP30 AB-PR-MD
GAS/LIGHT OILHP20-HP30-HP60-HP72-HR73A
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
tecnopress ser ies
157
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Rp 1”1/4 (32)
HP20 AB-PR-MD HP30 AB-PR-MD
Rp 1”1/2 (40)
Rp 1”1/2 (40)
Rp 2” (50)
DN65
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure.To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
GAS/LIGHT OIL HP20-HP30-HP60-HP72-HR73A
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
POWER (kW) POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
tecnopress ser ies
158
Provided with Progressive and Modulating operations, the dual fue l burners ser ies NOVANTA-CINQUECENTO represents the max achievement of our experience on medium-large burners (up to 8000 kW). Like all other dual fuel models they combine all mechanisms to work with two different fuels separately. This is possible because of a separated circuit for the oil pump motor; it means that the oil pump motor is not running when burner is working on natural gas.They are equipped with a high performance combustion head designed to achieve the max efficiency when working onnatural gas; combustion head is also equipped with a by-passing nozzle which, using a pressure regulator, can reach a turndown ratio 1:3.The control panel facia is printed with a mimic diagram fitted with neon lamps to indicate the different stages of the burner operation. The burner is provided by an UV photocell to detect the flame during operation.
HR91A PR-MDHR92A PR-MDHR93A PR-MD
HR512A PR-MDHR515A PR-MDHR520A PR-MDHR525A PR-MD
Electronic set up (optional)
GAS/LIGHT OILHR91A-HR92A-HR93A-HR512A-HR515A-HR520A-HR525A
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
novanta-cinquecentoser ies
159
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Gas connections min. max. supply kW kW
HR91A MG.xx.S.IT.A.1.xx 480 2.670 230/400V 3N ac 4 1.1 2” - DN65 - 80 - 100 HR92A MG.xx.S.IT.A.1.xx 480 3.050 230/400V 3N ac 5.5 1.1 2” - DN65 - 80 - 100 HR93A MG.xx.S.IT.A.1.xx 550 4.100 230/400V 3N ac 7.5 1.1 2” - DN65 - 80 - 100
(*) Approximate values
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
HR91A/HR92A/HR93A 1730 1280 1020 315
For the configuration of the gas train, see pages 98-99.
GAS/LIGHT OIL HR91A-HR92A-HR93A-HR512A-HR515A-HR520A-HR525A
Suggested boiler drilling
Burner flange
Type Model Overall dimensions * (mm)
A AA AB AC AD AE AN AP B BB C CC D E F G H J K L M N O P Q R S U V W Y Z
min maxHR91A MG.xx.S.IT.A.1.50 1431 242 820 425 35 380 429 100 490 419 941 422 1159 725 434 265 295 329 360 505 M12 417 280 310 295 522 148 374 624 216 690 228 185HR91A MG.xx.S.IT.A.1.65 1431 242 820 425 35 380 406 118 490 419 941 422 1309 875 434 265 295 288 360 505 M12 417 280 310 295 551 148 403 750 292 690 228 185HR91A MG.xx.S.IT.A.1.80 1431 242 820 425 35 380 439 132 490 419 941 422 1311 877 434 265 295 307 360 505 M12 417 280 310 295 592 148 444 750 322 690 228 185HR91A MG.xx.S.IT.A.1.100 1431 242 820 425 35 380 592 145 490 419 941 422 1401 967 434 265 295 447 360 505 M12 417 280 310 295 672 148 524 824 382 690 228 185HR92A MG.xx.S.IT.A.1.50 1431 242 820 425 35 380 429 100 490 419 941 422 1159 725 434 269 299 329 360 505 M12 417 280 310 295 522 148 374 624 216 690 228 185HR92A MG.xx.S.IT.A.1.65 1431 242 820 425 35 380 406 118 490 419 941 422 1309 875 434 269 299 288 360 505 M12 417 280 310 295 551 148 403 750 292 690 228 185HR92A MG.xx.S.IT.A.1.80 1431 242 820 425 35 380 439 132 490 419 941 422 1311 877 434 269 299 307 360 505 M12 417 280 310 295 592 148 444 750 322 690 228 185HR92A MG.xx.S.IT.A.1.100 1431 242 820 425 35 380 592 145 490 419 941 422 1401 967 434 269 299 447 360 505 M12 417 280 310 295 672 148 524 824 382 690 228 185HR93A MG.xx.S.IT.A.1.50 1461 242 820 425 35 380 429 100 495 460 966 422 1159 725 434 304 344 329 360 505 M12 417 280 310 295 522 148 374 624 216 690 228 185HR93A MG.xx.S.IT.A.1.65 1461 242 820 425 35 380 406 118 495 460 966 422 1309 875 434 304 344 288 360 505 M12 417 280 310 295 551 148 403 750 292 690 228 185HR93A MG.xx.S.IT.A.1.80 1461 242 820 425 35 380 439 132 495 460 966 422 1311 877 434 304 344 307 360 505 M12 417 280 310 295 592 148 444 750 322 690 228 185HR93A MG.xx.S.IT.A.1.100 1461 242 820 425 35 380 592 145 495 460 966 422 1401 967 434 304 344 447 360 505 M12 417 280 310 295 672 148 524 824 382 690 228 185
novanta-cinquecentoser ies
160
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Gas connections min. max. supply kW kW
HR512A MG.xx.S.IT.A.1.xxx 600 4.500 230/400V 3N ac 9.2 1.1 2” - DN65 - 80 - 100 HR515A MG.xx.S.IT.A.1.xxx 770 5.200 230/400V 3N ac 11 1.5 2” - DN65 - 80 - 100 HR520A MG.xx.S.IT.A.1.xxx 1.000 6.400 230/400V 3N ac 15 1.5 2” - DN65 - 80 - 100 HR525A MG.xx.S.IT.A.1.xxx 2.000 8.000 400V 3N ac 18.5 3 DN65 - 80 - 100
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
HR512A 1730 1430 1130 340 HR515A 1730 1430 1130 360 HR520A 1730 1430 1130 375 HR525A 1800 1500 1300 400
For the configuration of the gas train, see pages 98-99.
GAS/LIGHT OILHR91A-HR92A-HR93A-HR512A-HR515A-HR520A-HR525A
Suggested boiler drilling
Burner flange
Type Model Overall dimensions * (mm)
A AA AB AC AD AE AN AP B BB C CC D E F G H J K L M N O P Q R S U UU V W Y ZHR512A MG.xx.S.IT.A.1.50 1586 323 209 250 35 609 594 100 530 508 1056 446 1722 1079 643 340 380 494 540 492 M14 552 390 390 755 150 605 843 - 216 762 328 270HR512A MG.xx.S.IT.A.1.65 1586 323 209 250 35 609 612 118 530 508 1056 446 1692 1049 643 340 380 494 540 492 M14 552 390 390 633 150 483 843 - 292 762 328 270HR512A MG.xx.S.IT.A.1.80 1586 323 209 250 35 609 626 132 530 508 1056 446 1727 1084 643 340 380 494 540 492 M14 552 390 390 685 150 535 875 - 322 762 328 270HR512A MG.xx.S.IT.A.1.100 1586 323 209 250 35 609 639 145 530 508 1056 446 1810 1167 643 340 380 494 540 492 M14 552 390 390 792 150 642 942 - 382 762 328 270HR515A MG.xx.S.IT.A.1.50 1600 323 209 250 35 672 594 100 530 508 1070 446 1722 1079 643 380 420 494 540 492 M14 552 390 390 755 150 605 843 - 216 762 328 270HR515A MG.xx.S.IT.A.1.65 1600 323 209 250 35 672 612 118 530 508 1070 446 1692 1049 643 380 420 494 540 492 M14 552 390 390 633 150 483 843 - 292 762 328 270HR515A MG.xx.S.IT.A.1.80 1600 323 209 250 35 672 626 132 530 508 1070 446 1725 1084 643 380 420 494 540 492 M14 552 390 390 685 150 535 875 - 322 762 328 270HR515A MG.xx.S.IT.A.1.100 1600 323 209 250 35 672 639 145 530 508 1070 446 1810 1167 643 380 420 494 540 492 M14 552 390 390 792 150 642 942 - 382 762 328 270HR520A MG.xx.S.IT.A.1.50 1670 323 199 254 35 672 594 100 530 508 1140 446 1722 1079 643 400 450 494 540 492 M14 552 390 390 755 150 605 843 114 216 876 328 270HR520A MG.xx.S.IT.A.1.65 1670 323 199 254 35 672 612 118 530 508 1140 446 1692 1049 643 400 450 494 540 492 M14 552 390 390 633 150 483 843 114 292 876 328 270HR520A MG.xx.S.IT.A.1.80 1670 323 199 254 35 672 626 132 530 508 1140 446 1727 1084 643 400 450 494 540 492 M14 552 390 390 685 150 535 875 114 322 876 328 270HR520A MG.xx.S.IT.A.1.100 1670 323 199 254 35 672 639 145 530 508 1140 446 1810 1167 643 400 450 494 540 492 M14 552 390 390 792 150 642 942 114 382 876 328 270HR525A MG.xx.S.IT.A.1.65 1670 145 189 275 35 682 612 118 530 650 1140 598 1692 1049 643 434 484* 494 540 492 M14 552 390 390 633 150 483 843 172 292 934 328 270HR525A MG.xx.S.IT.A.1.80 1670 145 189 275 35 682 626 132 530 650 1140 598 1727 1084 643 434 484* 494 540 492 M14 552 390 390 685 150 535 875 172 322 934 328 270HR525A MG.xx.S.IT.A.1.100 1670 145 189 275 35 682 639 145 530 650 1140 598 1810 1167 643 434 484* 494 540 492 M14 552 390 390 792 150 642 942 172 382 934 328 270
(*) Approximate values
novanta-cinquecentoser ies
161
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, pages 95 and 167) In compliance with DIRECTIVE 2009/142/CEIn compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Microprocessor-controlled burners (see page 82)
GAS/LIGHT OIL HR91A-HR92A-HR93A-HR512A-HR515A-HR520A-HR525A
HR91A HR92A HR93AModel Gas train Operation Code Price € Code Price € Code Price €
MG.PR.S.IT.A.1.50 2” PR 012073753 012074153 012074553MG.PR.S.IT.A.1.65 DN65 PR 012073853 012074253 012074653MG.PR.S.IT.A.1.80 DN80 PR 012073953 012074353 012074753MG.PR.S.IT.A.1.100 DN100 PR 012074053 012074453 012074853MG.MD.S.IT.A.1.50 2” MD(*) 012073754 012074154 012074554MG.MD.S.IT.A.1.65 DN65 MD(*) 012073854 012074254 012074654MG.MD.S.IT.A.1.80 DN80 MD(*) 012073954 012074354 012074754MG.MD.S.IT.A.1.100 DN100 MD(*) 012074054 012074454 012074854
HR520A HR525AModel Gas train Operation Code Price € Code Price €
MG.PR.S.IT.A.1.50 2” PR 029070953MG.PR.S.IT.A.1.65 DN65 PR 029071053 029071453MG.PR.S.IT.A.1.80 DN80 PR 029071153 029071553MG.PR.S.IT.A.1.100 DN100 PR 029071253 029071653MG.MD.S.IT.A.1.50 2” MD(*) 029070954MG.MD.S.IT.A.1.65 DN65 MD(*) 029071054 029071454MG.MD.S.IT.A.1.80 DN80 MD(*) 029071154 029071554MG.MD.S.IT.A.1.100 DN100 MD(*) 029071254 029071654
HR512A HR515AModel Gas train Operation Code Price € Code Price €
MG.PR.S.IT.A.1.50 2” PR 029070153 029070553MG.PR.S.IT.A.1.65 DN65 PR 029070253 029070653MG.PR.S.IT.A.1.80 DN80 PR 029070353 029070753MG.PR.S.IT.A.1.100 DN100 PR 029070453 029070853MG.MD.S.IT.A.1.50 2” MD(*) 029070154 029070554MG.MD.S.IT.A.1.65 DN65 MD(*) 029070254 029070654MG.MD.S.IT.A.1.80 DN80 MD(*) 029070354 029070754MG.MD.S.IT.A.1.100 DN100 MD(*) 029070454 029070854
novanta-cinquecentoser ies
162
GAS/LIGHT OILHR91A-HR92A-HR93A-HR512A-HR515A-HR520A-HR525A
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
novanta-cinquecentoser ies
163
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)M
inim
a p
ress
ione
gas
in r
ete
(mb
ar)
Min
ima
pre
ssio
ne g
as in
ret
e (m
bar
)
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure.To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
GAS/LIGHT OIL HR91A-HR92A-HR93A-HR512A-HR515A-HR520A-HR525A
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW) POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar) novanta-cinquecentoser ies
164
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000
HR1025 PR-MDHR1030_65 PR-MD
HR1030 PR-MDHR1040 PR-MD
GAS/LIGHT OILHR1025-HR1030-HR1040
The burners HR1000 represent in terms of performance curve and dimensions, the larger version of all our dual fuel (gas-light oil) burners (up to 13.000 kW). These burners are made of a solid aluminium housing and thei r applications are not only industrial, but also to public users (hospitals, universities, etc...) and to big heating plants.The possibility to use both fuels separately, the manageability and the easy maintenance notwithstanding its big dimensions, makes this product really special. This burner is produced in different versions both in progressive and modulating operation. To customize our product according to our clients’ specific requests we can manage to install different electric control panels such as remote console type, cabinet type or wall-mounted type. Moreover, apart from the mechanical cam, electronic system is suitable to optimise efficiency through a total control of O2 value at any stage.
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Output (kW)
milleser ies
Electronic set up (optional)
165
TECHNICAL DETAILS
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, pages 95 and 167)In compliance with DIRECTIVE 2009/142/CEIn compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CEFor burners with output up to 15 MW, quotations upon requestMicroprocessor-controlled burners (see page 82)
For the configuration of the gas train, see pages 98-99.
Type Model Power kW Electric power Fan motor Pump motor Gas connections min. max. supply kW kW
HR1025 MG.xx.S.IT.A.1.xx 2.550 8.700 400V 3N ac 18.5 4 DN 65 - 80 - 100 HR1030 MG.xx.S.IT.A.1.65 2.550 9.500 400V 3N ac 22 4 DN65 HR1030 MG.xx.S.IT.A.1.xx 2.550 10.600 400V 3N ac 22 4 DN 80 - 100 HR1040 MG.xx.x.IT.A.1.xx 2.550 13.000 400V 3N ac 30 4 DN80 - 100 - 125
HR1025-HR1030-HR1040GAS/LIGHT OIL
Suggested boiler drilling
Burner flange
HR1025 HR1030 HR1040Model Gas train Operation Code Price € Code Price € Code Price €
MG.PR.S.IT.A.1.65 DN65 PR 023071653 023071953MG.PR.S.IT.A.1.80 DN80 PR 023071753 023072053 023072253MG.PR.S.IT.A.1.100 DN100 PR 023071853 023072153 023072353MG.PR.S.IT.A.1.125 DN125 PR 023072453MG.MD.S.IT.A.1.65 DN65 MD(*) 023071654 023071954MG.MD.S.IT.A.1.80 DN80 MD(*) 023071754 023072054 023072254MG.MD.S.IT.A.1.100 DN100 MD(*) 023071854 023072154 023072354MG.MD.S.IT.A.1.125 DN125 MD(*) - - 023072454
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
HR1025/HR1030/HR1040 2270 1720 1320 700
(*) Approximate values
Type Model Overall dimensions* (mm)
A (AS)
AA AB AC AD AE AN AP B BB C CC D E F G H J K L M N O P Q R RR S SS U UU V W Y Z
HR1025 MG.xx.S.IT.A.1.65 2088 377 1452 651 25 585 827 118 544 641 1544 680 2121 1299 822 400 450 709 660 816 M16 651 460 460 914 200 265 714 80 1092 142 292 1146 379 330HR1025 MG.xx.S.IT.A.1.80 2088 377 1452 651 25 585 841 132 544 641 1544 680 2123 1301 822 400 450 709 660 816 M16 651 460 460 936 200 265 736 80 1092 142 322 1146 379 330HR1025 MG.xx.S.IT.A.1.100 2088 377 1452 651 25 585 854 145 544 641 1544 680 2139 1317 822 400 450 709 660 816 M16 651 460 460 842 200 265 642 80 1092 142 382 1146 379 330HR1030 MG.xx.S.IT.A.1.65 2088 377 1452 651 25 585 827 118 544 657 1544 680 2121 1299 822 454 504 709 660 816 M16 651 460 460 914 200 265 714 80 1092 142 292 1146 372 330HR1030 MG.xx.S.IT.A.1.80 2088 377 1452 651 25 585 841 132 544 657 1544 680 2123 1301 822 454 504 709 660 816 M16 651 460 460 936 200 265 736 80 1092 142 322 1146 372 330HR1030 MG.xx.S.IT.A.1.100 2088 377 1452 651 25 585 854 145 544 657 1544 680 2139 1317 822 454 504 709 660 816 M16 651 460 460 842 200 265 642 80 1092 142 382 1146 372 330HR1040 MG.xx.S.IT.A.1.80 2106 377 1452 651 25 585 841 132 544 657 1562 680 2123 1301 822 514 564 709 660 816 M16 651 460 460 936 200 265 736 80 1192 142 322 1146 408 330HR1040 MG.xx.S.IT.A.1.100 2106 377 1452 651 25 585 854 145 544 657 1562 680 2139 1317 822 514 564 709 660 816 M16 651 460 460 842 200 265 642 80 1192 142 382 1146 408 330HR1040 MG.xx.S.IT.A.1.125 2106 377 1452 651 25 585 884 175 544 657 1562 680 2254 1432 822 514 564 709 660 816 M16 651 460 460 954 200 265 754 80 1192 142 480 1146 408 330
milleser ies
166
0
100
200
300
400
2000 3000 4000 5000 6000 7000 8000 9000
DN65
DN80
DN100
0
100
200
300
400
2000 3000 4000 5000 6000 7000 8000 9000 10000
0
50
100
150
200
250
300
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
DN80
DN100
0
50
100
150
200
250
300
350
400
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000
DN100
DN80
DN125
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 90000
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 110000
5
10
15
20
25
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure.To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
GAS/LIGHT OILHR1025-HR1030-HR1040
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
milleser ies
167
FILTERS
VACUUM GAUGE
Description Code Price €
Glycerine vacuum gauge, -1 ÷ 0 bar (1⁄4” connection) 2.52.00.08
SUPPORT FOR PRESSURE GAUGE
Description Code Price €
Isolating valve (1⁄4” connection) 2.52.00.05
MANOMETER
Description Code Price €
Glycerine gauge, 0 ÷ 40 bar (1⁄4” connection) 2.52.00.03
Note: see on page 95 for modulation probes and accessories.
Description Code Price €
Filter 3⁄8” 0,06 PL 2.09.00.01 Filter 3⁄8” 0,1 P 2.09.00.25 Filter 1” 0,1 small 2.09.00.17 Filter 1” 0,1 big 2.09.00.18
AUTOMATIC SWITCH FUEL COMMUTATION
Description Code Price €
MIXMATIC -
ACCESSORIES FOR DUAL FUEL BURNERS (NATURAL GAS/LIGHT OIL)
168
d u a l f u e l b u r n e r s g a s / h e a v y o i l
tecnopress seriesKP60 - PR/MDKP72 - PR/MDKP73A - PR/MD
novanta - cinquecento seriesKP91A - PR/MDKP92A - PR/MDKP93A - PR/MD
KR512A - PR/MDKR515A - PR/MDKR520A - PR/MDKR525A - PR/MD
KP60
KP72
KP72
KP91A
KP92A
KP93A
KR512A
KR515A
KR520A
(from 480 to 3.050 kW)
(from 330 to 1.550 kW)
(from 330 to 1.200 kW)
(from 160 to 880 kW)
KR1025
KP1030
KR1040
KR1030
KP73A (from 320 to 2.300 kW)
(from 480 to 2.670 kW)
KR525A
Type
169
mille seriesKR1025 - PR/MDKR1030 - PR/MDKR1040 - PR/MD
(from 1.000 to 6.400 kW)
(from 770 to 5.200 kW)
(from 600 to 4.500 kW)
(from 550 to 4.100 kW)
(from 2.550 to 8.700 kW)
(from 2.550 to 9.500 kW)
(from 2.550 to 10.600 kW)
(from 2.550 to 13.000 kW)
(from 2.000 to 8.000 kW)
170
KP60 PR-MD
KP72 PR-MD..1.xxKP73A PR-MD
KP72 PR-MD..0.xx
The need to meet any particolar requests, as building a burner able to burn either natural gas or heavy oil, has lead us to create the KP burner series, suitable for medium and large outputs and for industrial purposes. The output from 170 and 2300 kW allows many adjustments to satisfy all requests. All burners with progressive for modulating operation, have been built to burn oils whose standard viscosity is 50 cSt at 50°C (7°E - 50°C). Upon request it is available the version for heavy oils up to 400 cSt at 50°C (50°E - 50°C). In order to keep the oil fluid, the burner is provided with a pre-heating tank equipped with low thermical load electrical resistance.
KP60-KP72-KP73AGAS/
HEAVY OIL
tecnopress ser iesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
171
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Resistor Gas connections min. max. supply kW kW kW
KP60 MN.xx.S.IT.A.0.xx 160 880 230/400V 3N ac 1.1 0.55 4.5 1”1/2 - 2” - DN65 KP72 MN.xx.S.IT.A.0.xx 330 1.200 230/400V 3N ac 2.2 0.55 8 2” - DN65 - 80 KP72 MN.xx.S.IT.A.1.xx 330 1.550 230/400V 3N ac 2.2 0.55 8 2” - DN65 - 80 KP73A MN.xx.S.IT.A.1.xx 320 2.300 230/400V 3N ac 3 1.1 12 2” - DN65 - 80
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, pages 95 and 182)■ = Burner equipped with external air inletIn compliance with DIRECTIVE 2009/142/CE - In compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CEMicroprocessor-controlled burners (see page 82)
Purely approximate values regarding model with gas train DN65*/80**(•) Install a counter-flange between the burner and the boiler or in alternative, drill the H hole smaller but higher than the Y point and assemble the blast tube inside the boiler
Type Model Overall dimensions (mm) Boiler drilling (mm)
A B C D E F G J Y L U H M N P K O min max
KP60* MN.xx.S.IT.A.0.xx 1116 376 740 1205 685 520 250 250 190 520 540 280• M10 269 190 240 190 190 KP72** MN.xx.S.IT.A.0.xx 1325 505 820 1365 825 540 300 265 212 580 560 340• M10 330 233 300 216 250 KP73A** MN.xx.S.IT.A.0.xx 1320 500 820 1365 825 540 234 265 212 580 560 264 M10 330 233 300 216 250
For the configuration of the gas train, see pages 98-99
Burnerflange (mm)
KP60 KP72 - KP73A
KP60-KP72-KP73AGAS/HEAVY OIL
Type Packaging dimensions* (mm) l p h kg
KP60 1730 1280 1020 176 KP72/KP73A 1730 1280 1020 280
Suggested boiler drilling
Burner flangeSuggested
boiler drillingBurner flange
KP60 KP72 KP73AModel Gas train Operation Code Price € Code Price € Code Price €
MN.PR.S.IT.A.0.40 1”½ PR 004080143 - -MN.PR.S.IT.A.0.50 2” PR 004080243 008080143 -MN.PR.S.IT.A.0.65 DN65 PR 004080343 008080243 -MN.PR.S.IT.A.0.80 DN80 PR - 008080343 -MN.PR.S.IT.A.1.50 ■ 2” PR - 008080153 008080553MN.PR.S.IT.A.1.65 ■ DN65 PR - 008080253 008080653MN.PR.S.IT.A.1.80 ■ DN80 PR - 008080353 008080753MN.MD.S.IT.A.0.40 1”½ MD(*) 004080144 - -MN.MD.S.IT.A.0.50 2” MD(*) 004080244 008080144 -MN.MD.S.IT.A.0.65 DN65 MD(*) 004080344 008080244 -MN.MD.S.IT.A.0.80 DN80 MD(*) - 008080344 -MN.MD.S.IT.A.1.50 ■ 2” MD(*) - 008080154 008080554MN.MD.S.IT.A.1.65 ■ DN65 MD(*) - 008080254 008080654MN.MD.S.IT.A.1.80 ■ DN80 MD(*) - 008080354 008080754
(*) Approximate values
tecnopress ser ies
172
Rp 1”1/2 (40)
Rp 2” (50)
DN65
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure.To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
KP60-KP72-KP73AGAS/
HEAVY OIL
tecnopress ser ies
OUTPUT (kW) Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
173
The dual fuel series KP integrates perfectly the mechanical devices to adjust both the natural gas operation and heavyoil one for industrial purposes up to 8000 kW. These burners are equipped with a separate electrical pump motor therefore they can burn gas and oil separately. As a matter of fact the high performance fuel pump is driven by a separate motor which is only running when oil firing is selected. The UV photocell ensures a reliable flame control system. The burner is provided with a pre-heating tank equipped with low thermical load electrical resistance to ensure oil fluidity. All burners with progressive or modulating operation, have been built to burn fuels whose standard viscosity is 50 cSt at 50°C (7°E - 50°C). Upon request it is available the version for heavy oil up to 400 cSt at 50°C (50°E - 50°C) complete with the heating cable for the oil lance.
KP92A PR-MDKP93A PR-MD
KR512A PR-MDKR515A PR-MDKR520A PR-MDKR525A PR-MD
KP91A PR-MD
KP91A-KP92A-KP93A-KR512A-KR515A-KR520A-KR525AGAS/HEAVY OIL
novanta-cinquecentoser iesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
174
TECHNICAL DETAILS
Type Model Power kW Electric power Fan motor Pump motor Resistor Gas connections min. max. supply kW kW kW
KP91A MN.xx.S.IT.A.1.xx 480 2.670 230/400V 3N ac 4 1.1 18 2” - DN 65 - 80 - 100 KP92A MN.xx.S.IT.A.1.xx 480 3.050 230/400V 3N ac 5.5 1.1 18 2” - DN 65 - 80 - 100 KP93A MN.xx.S.IT.A.1.xx 550 4.100 230/400V 3N ac 7.5 1.5 24 2” - DN 65 - 80 - 100
(*) Approximate values
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
KP91A/KP92A/KP93A 1730 1280 1020 370
For the configuration of the gas train, see pages 98-99
Suggested boiler drilling
Burner flange
Type Model Overall dimensions * (mm)
AS AA BS BB C CC D DD E EE F G H J K L M N O P Q R S T U V W Y Z
min. maxKP91A MN.xx.S.IT.A.1.50 1538 157 490 419 918 532 1439 356 852 520 587 265 295 449 360 550 M12 417 280 310 295 522 148 374 47 624 216 798 228 185KP91A MN.xx.S.IT.A.1.65 1538 157 490 419 918 532 1636 356 1049 520 587 265 295 447 360 565 M12 417 280 310 295 631 148 483 47 843 292 798 228 185KP91A MN.xx.S.IT.A.1.80 1538 157 490 419 918 532 1671 356 1084 520 587 265 295 447 360 579 M12 417 280 310 295 683 148 535 47 875 322 798 228 185KP91A MN.xx.S.IT.A.1.100 1538 157 490 419 918 532 1754 356 1167 520 587 265 295 447 360 592 M12 417 280 310 295 790 148 642 47 942 382 798 228 185KP92A MN.xx.S.IT.A.1.50 1538 157 490 419 918 532 1439 356 852 520 587 269 299 449 360 550 M12 417 280 310 295 522 148 374 47 624 216 798 228 185KP92A MN.xx.S.IT.A.1.65 1538 157 490 419 918 532 1636 356 1049 520 587 269 299 447 360 565 M12 417 280 310 295 631 148 483 47 843 292 798 228 185KP92A MN.xx.S.IT.A.1.80 1538 157 490 419 918 532 1671 356 1084 520 587 269 299 447 360 579 M12 417 280 310 295 683 148 535 47 875 322 798 228 185KP92A MN.xx.S.IT.A.1.100 1538 157 490 419 918 532 1754 356 1167 520 587 269 299 447 360 592 M12 417 280 310 295 790 148 642 47 942 382 798 228 185KP93A MN.xx.S.IT.A.1.50 1543 157 495 460 918 532 1439 356 852 520 587 304 344 449 360 550 M12 417 280 310 295 522 148 374 47 624 216 798 228 185KP93A MN.xx.S.IT.A.1.65 1543 157 495 460 918 532 1636 356 1049 520 587 304 344 447 360 565 M12 417 280 310 295 631 148 483 47 843 292 798 228 185KP93A MN.xx.S.IT.A.1.80 1543 157 495 460 918 532 1671 356 1084 520 587 304 344 447 360 579 M12 417 280 310 295 683 148 535 47 875 322 798 228 185KP93A MN.xx.S.IT.A.1.100 1543 157 495 460 918 532 1754 356 1167 520 587 304 344 447 360 592 M12 417 280 310 295 790 148 642 47 942 382 798 228 185
KP91A-KP92A-KP93A-KR512A-KR515A-KR520A-KR525AGAS/
HEAVY OIL
novanta-cinquecentoser ies
175
Type Model Power kW Electric power Fan motor Pump motor Resistor Gas connections min. max. supply kW kW kW
KR512A MN.xx.S.IT.A.1.xxx 600 4.500 230/400V 3N ac 9.2 1.5 24 2” - DN 65 - 80 - 100 KR515A MN.xx.S.IT.A.1.xxx 770 5.200 230/400V 3N ac 11 1.5 12 + 18 2” - DN 65 - 80 - 100 KR520A MN.xx.S.IT.A.1.xxx 1.000 6.400 230/400V 3N ac 15 2.2 18 + 24 2” - DN 65 - 80 - 100 KR525A MN.xx.S.IT.A.1.xxx 2.000 8.000 400V 3N ac 18.5 2.2 24 + 24 DN 65 - 80 - 100
For the configuration of the gas train, see pages 98-99
Suggested boiler drilling
Burner flange
TECHNICAL DETAILS
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
KR512A/KR515A/KR520A 1760 1470 1300 470 KR525A 1800 1500 1300 480
Type Model Overall dimensions* (mm)
A AA AC AD AN AP B BB C CC D E F G H J K L M N O P Q R S U UU V W Y ZKR512A MN.xx.S.IT.A.1.50 1586 323 250 35 594 100 530 508 1056 446 1722 1079 643 340 380 494 540 492 M14 552 390 390 755 150 605 843 36 216 762 328 270KR512A MN.xx.S.IT.A.1.65 1586 323 250 35 612 118 530 508 1056 446 1692 1049 643 340 380 494 540 492 M14 552 390 390 633 150 483 843 36 292 762 328 270KR512A MN.xx.S.IT.A.1.80 1586 323 250 35 626 132 530 508 1056 446 1727 1084 643 340 380 494 540 492 M14 552 390 390 685 150 535 875 36 322 762 328 270KR512A MN.xx.S.IT.A.1.100 1586 323 250 35 639 145 530 508 1056 446 1810 1167 643 340 380 494 540 492 M14 552 390 390 792 150 642 942 36 382 762 328 270KR515A MN.xx.S.IT.A.1.50 1600 323 250 35 594 100 530 508 1070 446 1722 1079 643 380 420 494 540 492 M14 552 390 390 755 150 605 843 36 216 762 328 270KR515A MN.xx.S.IT.A.1.65 1600 323 250 35 612 118 530 508 1070 446 1692 1049 643 380 420 494 540 492 M14 552 390 390 633 150 483 843 36 292 762 328 270KR515A MN.xx.S.IT.A.1.80 1600 323 250 35 626 132 530 508 1070 446 1725 1084 643 380 420 494 540 492 M14 552 390 390 685 150 535 875 36 322 762 328 270KR515A MN.xx.S.IT.A.1.100 1600 323 250 35 639 145 530 508 1070 446 1810 1167 643 380 420 494 540 492 M14 552 390 390 792 150 642 942 36 382 762 328 270KR520A MN.xx.S.IT.A.1.50 1670 323 254 35 594 100 530 508 1140 446 1722 1079 643 400 450 494 540 492 M14 552 390 390 755 150 605 843 36 216 876 328 270KR520A MN.xx.S.IT.A.1.65 1670 323 254 35 612 118 530 508 1140 446 1692 1049 643 400 450 494 540 492 M14 552 390 390 633 150 483 843 36 292 876 328 270KR520A MN.xx.S.IT.A.1.80 1670 323 254 35 626 132 530 508 1140 446 1727 1084 643 400 450 494 540 492 M14 552 390 390 685 150 535 875 36 322 876 328 270KR520A MN.xx.S.IT.A.1.100 1670 323 254 35 639 145 530 508 1140 446 1810 1167 643 400 450 494 540 492 M14 552 390 390 792 150 642 942 36 382 876 328 270KR525A MN.xx.S.IT.A.1.65 1670 145 275 35 612 118 530 650 1140 598 1692 1049 643 434 484• 494 540 492 M14 552 390 390 633 150 483 843 78 292 934 328 270KR525A MN.xx.S.IT.A.1.80 1670 145 275 35 626 132 530 650 1140 598 1727 1084 643 434 484• 494 540 492 M14 552 390 390 685 150 535 875 78 322 934 328 270KR525A MN.xx.S.IT.A.1.100 1670 145 275 35 639 145 530 650 1140 598 1810 1167 643 434 484• 494 540 492 M14 552 390 390 792 150 642 942 78 382 934 328 270
(*) Approximate values(•) Install a counter-flange between the burner and the boiler or in alternative, drill the H hole smaller but higher than the Y point and assemble the blast tube
inside the boiler
KP91A-KP92A-KP93A-KR512A-KR515A-KR520A-KR525AGAS/HEAVY OIL
novanta-cinquecentoser ies
176
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, pages 95 and 182)In compliance with DIRECTIVE 2009/142/CEIn compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
Microprocessor-controlled burners (see page 82)
KR520A KR525AModel Gas train Operation Code Price € Code Price €
MN.PR.S.IT.A.1.50 2” PR 029080953 -MN.PR.S.IT.A.1.65 DN65 PR 029081053 029081453MN.PR.S.IT.A.1.80 DN80 PR 029081153 029081553MN.PR.S.IT.A.1.100 DN100 PR 029081253 029081653MN.MD.S.IT.A.1.50 2” MD(*) 029080954MN.MD.S.IT.A.1.65 DN65 MD(*) 029081054 029081454MN.MD.S.IT.A.1.80 DN80 MD(*) 029081154 029081554MN.MD.S.IT.A.1.100 DN100 MD(*) 029081254 029081654
KP91A KP92A KP93AModel Gas train Operation Code Price € Code Price € Code Price €
MN.PR.S.IT.A.1.50 2” PR 012081753 012082153 012081353MN.PR.S.IT.A.1.65 DN65 PR 012081853 012082253 012081453MN.PR.S.IT.A.1.80 DN80 PR 012081953 012082353 012081553MN.PR.S.IT.A.1.100 DN100 PR 012082053 012082453 012081653MN.MD.S.IT.A.1.50 2” MD(*) 012081754 012082154 012081354MN.MD.S.IT.A.1.65 DN65 MD(*) 012081854 012082254 012081454MN.MD.S.IT.A.1.80 DN80 MD(*) 012081954 012082354 012081554MN.MD.S.IT.A.1.100 DN100 MD(*) 012082054 012082454 012081654
KR512A KR515AModel Gas train Operation Code Price € Code Price €
MN.PR.S.IT.A.1.50 2” PR 029080153 029080553MN.PR.S.IT.A.1.65 DN65 PR 029080253 029080653MN.PR.S.IT.A.1.80 DN80 PR 029080353 029080753MN.PR.S.IT.A.1.100 DN100 PR 029080453 029080853MN.MD.S.IT.A.1.50 2” MD(*) 029080154 029080554MN.MD.S.IT.A.1.65 DN65 MD(*) 029080254 029080654MN.MD.S.IT.A.1.80 DN80 MD(*) 029080354 029080754MN.MD.S.IT.A.1.100 DN100 MD(*) 029080454 029080854
KP91A-KP92A-KP93A-KR512A-KR515A-KR520A-KR525AGAS/
HEAVY OIL
novanta-cinquecentoser ies
177
0
2
4
6
8
10
12
14
16
400 800 1200 1600 2000 2400 2800 3200
0
2
4
6
8
10
12
14
16
400 800 1200 1600 2000 2400 2800 3200 3600
0
2
4
6
8
10
12
14
16
0 500 1000 1500 2000 2500 3000 3500 4000 45000
2
4
6
8
10
12
14
16
18
20
500 1500 2500 3500 4500
0
2
4
6
8
10
12
14
16
18
20
500 1500 2500 3500 4500 55000
5
10
15
20
500 1500 2500 3500 4500 5500 6500 7500
0
5
10
15
20
25
1500 2500 3500 4500 5500 6500 7500 8500
KP91A-KP92A-KP93A-KR512A-KR515A-KR520A-KR525AGAS/HEAVY OIL
novanta-cinquecentoser ies
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
178
0
10
20
30
40
50
60
70
80
90
100
400 800 1200 1600 2000 2400 2800 3200
Rp 2" (50)
DN65
DN80
DN100
0
20
40
60
80
100
120
140
400 800 1200 1600 2000 2400 2800 3200 3600
Rp 2" (50)
DN100
DN80
DN65
0
40
80
120
160
200
0 500 1000 1500 2000 2500 3000 3500 4000 4500
Rp 2" (50)
DN65
DN80
DN100
0
50
100
150
200
500 1500 2500 3500 4500
Rp 2" (50)
DN65
DN80
DN100
0
100
200
300
500 1500 2500 3500 4500 5500
Rp 2" (50)
DN65
DN80
DN100
0
50
100
150
200
250
300
350
400
450
500 1500 2500 3500 4500 5500 6500 7500
Rp 2" (50)
DN65
DN80
DN100
0
50
100
150
200
250
300
350
1500 2500 3500 4500 5500 6500 7500 8500
DN65
DN80
DN100 Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure.To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
KP91A-KP92A-KP93A-KR512A-KR515A-KR520A-KR525AGAS/
HEAVY OIL
novanta-cinquecentoser ies
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW) POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
179
These burners represent the larger version of KP series, up to 13.000 kW. These burners are equipped with a separate electrical pump motor therefore they can burn gas and oil separately. As a mat ter of fact the high performance fuel pump is driven by a separate motor which is only running when oil firing is selected. The UV photocell ensures a reliable flame control system. The burner is provided with a preheating tank equipped with low thermical load electrical resistance to ensure oil fluidity. All burners with progressive or modulating operation, have been built to burn oil whose standard viscosity is 50 cSt at 50°C (7°E - 50°C). Upon request it is available the version for heavy oil up to 400 cSt at 50°C (50°E - 50°C).
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000
KR1025 PR-MDKR1030_65 PR-MD
KR1030 PR-MDKR1040 PR-MD
KR1025-KR1030-KR1040GAS/HEAVY OIL
Electronic set up (optional)
milleser iesB
ack-
pre
ssur
e in
co
mb
usti
on
cham
ber
(mb
ar)
Output (kW)
180
TECHNICAL DETAILS
(*) In order for the supply to be completed, the burner must be equipped with the respective modulating probe (see accessory table, pages 95 and 182)In compliance with DIRECTIVE 2009/142/CEIn compliance with DIRECTIVE E.M.C. 2004/108/CE and DIRECTIVE B.T. 2006/95/CE
N.B. as far as burner outputs up to 15MW, quotation on requestMicroprocessor-controlled burners (see page 82)
Type Model Power kW Electric power Fan motor Pump motor Resistor Gas connections min. max. supply kW kW kW
KR1025 MN.xx.S.IT.A.1.xx 2.550 8.700 400V 3N ac 18.5 5.5 24 + 24 DN 65 - 80 - 100 KR1030 MN.xx.S.IT.A.1.65 2.550 9.500 400V 3N ac 22 5.5 24 + 24 DN 65 KR1030 MN.xx.S.IT.A.1.xx 2.550 10.600 400V 3N ac 22 5.5 24 + 24 DN 80 - 100 KR1040 MN.xx.x.IT.A.1.xx 2.550 13.000 400V 3N ac 30 5.5 24 + 24 DN 80 - 100 - 125
For the configuration of the gas train, see pages 98-99
(*) Approximate values
Suggested boiler drilling
Burner flange
(*) Approximate values
Type Packaging dimensions* (mm) l p h kg
KR1025/KR1030 2270 1720 1320 760 KR1030/KR1040 2270 1720 1320 780 GRUPPO SPINTA 1170 770 1610
Type Model Overall dimensions* (mm)
A AA AD AN AP B BB C CC D E F G H J K L M N O P Q R RR S SS U UU V W Y ZKR1025 MN.xx.S.IT.A.1.65 2088 377 25 827 118 544 641 1544 680 2121 1299 822 400 450 709 660 816 M16 651 460 460 914 200 265 714 80 1092 142 292 1146 379 330KR1025 MN.xx.S.IT.A.1.80 2088 377 25 841 132 544 641 1544 680 2123 1301 822 400 450 709 660 816 M16 651 460 460 936 200 265 736 80 1092 142 322 1146 379 330KR1025 MN.xx.S.IT.A.1.100 2088 377 25 854 145 544 641 1544 680 2139 1317 822 400 450 709 660 816 M16 651 460 460 842 200 265 642 80 1092 142 382 1146 379 330KR1030 MN.xx.S.IT.A.1.65 2088 377 25 827 118 544 657 1544 680 2121 1299 822 454 504 709 660 816 M16 651 460 460 914 200 265 714 80 1092 142 292 1146 372 330KR1030 MN.xx.S.IT.A.1.80 2088 377 25 841 132 544 657 1544 680 2123 1301 822 454 504 709 660 816 M16 651 460 460 936 200 265 736 80 1092 142 322 1146 372 330KR1030 MN.xx.S.IT.A.1.100 2088 377 25 854 145 544 657 1544 680 2139 1317 822 454 504 709 660 816 M16 651 460 460 842 200 265 642 80 1092 142 382 1146 372 330KR1040 MN.xx.S.IT.A.1.80 2106 377 25 841 132 544 657 1562 680 2123 1301 822 514 564 709 660 816 M16 651 460 460 936 200 265 736 80 1192 142 322 1146 408 330KR1040 MN.xx.S.IT.A.1.100 2106 377 25 854 145 544 657 1562 680 2139 1317 822 514 564 709 660 816 M16 651 460 460 842 200 265 642 80 1192 142 382 1146 408 330KR1040 MN.xx.S.IT.A.1.125 2106 377 25 884 175 544 657 1562 680 2254 1432 822 514 564 709 660 816 M16 651 460 460 954 200 265 754 80 1192 142 480 1146 408 330
KR1025 KR1030 KR1040Model Gas train Operation Code Price € Code Price € Code Price €
MN.PR.S.IT.A.1.65 DN65 PR 023081653 023081953MN.PR.S.IT.A.1.80 DN80 PR 023081753 023082053 023082253MN.PR.S.IT.A.1.100 DN100 PR 023081853 023082153 023082353MN.PR.S.IT.A.1.125 DN125 PR 023082453MN.MD.S.IT.A.1.65 DN65 MD(*) 023081654 023081954MN.MD.S.IT.A.1.80 DN80 MD(*) 023081754 023082054 023082254MN.MD.S.IT.A.1.100 DN100 MD(*) 023081854 023082154 023082354MN.MD.S.IT.A.1.125 DN125 MD(*) 023082454
KR1025-KR1030-KR1040GAS/
HEAVY OIL
milleser ies
181
0
50
100
150
200
250
300
350
400
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000
DN100
DN80
DN125
0
50
100
150
200
250
300
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
DN80
DN100
0
100
200
300
400
2000 3000 4000 5000 6000 7000 8000 9000 10000
0
100
200
300
400
2000 3000 4000 5000 6000 7000 8000 9000
DN65
DN100
DN80
DN 65
KR1040 PR-MD
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000
0
5
10
15
20
25
30
35
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000
0
5
10
15
20
25
2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000
KR1040 PR-MD
Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure.To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.
KR1025-KR1030-KR1040GAS/HEAVY OIL
milleser ies
POWER (kW) POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
POWER (kW) POWER (kW)
M
inim
um in
let
gas
pre
ssur
e (m
bar
)
Min
imum
inle
t g
as p
ress
ure
(mb
ar)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
OUTPUT (kW)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
Bac
k-p
ress
ure
in c
om
bus
tio
n ch
amb
er (m
bar
)
OUTPUT (kW)
182
FILTERS
Description Code Price €
Filter 1” 0,3 small 2.09.02.02 Filter 1” 0,3 big 2.09.02.07
VACUUM GAUGE
Description Code Price €
Glycerine vacuum gauge -1 ÷ 0 bar (1⁄4” connection) 2.52.00.08
SUPPORT FOR PRESSURE GAUGE
Description Code Price €
Isolating valve (1⁄4” connection) 2.52.00.05
MANOMETER
Description Code Price €
Glycerine gauge 0 ÷ 6 bar (1⁄4” connection) 2.52.00.35 Glycerine gauge 0 ÷ 10 bar (1⁄4” connection) 2.52.00.36 Glycerine gauge 0 ÷ 16 bar (1⁄4” connection) 2.52.00.33 Glycerine gauge 0 ÷ 25 bar (1⁄4” connection) 2.52.00.34 Glycerine gauge 0 ÷ 40 bar (1⁄4” connection) 2.52.00.19
Note: see on page 95 for modulation probes and accessories
Prices on request for:
- Pre heating units for heavy oil- Pumping units for heavy oil- Degassing tank
AUTOMATIC SWITCH FUEL COMMUTATION
Description Code Price €
MIXMATIC
ACCESSORIES FOR DUAL FUEL BURNERS (NATURAL GAS/HEAVY OIL)
183
184
i n d u s t r i a l b u r n e r s
These industrial burners have been designed for all those applications in which single-block models are poorly suited or entirely inadequate, such as wherever the power values at the firing would otherwise require the use of built-in fans of excessive size, whenever combustion air pre-heating is provided, or again, whenever the primary noise source must be shifted to soundproofed areas The range runs from 264 kW to 67 MW power in different constructive versions as required by the type of final system or specific client needs.Aluminium casting is usually used for the lower power models (up to 19 MW), while steel construction is adopted for higher power models. This industrial burner design project was developed to obtain the greatest versatility in order to achieve the objectives posed by the client, and therefore in respect of the widest range of technical specifications. For example, combustion heads with air inlet from above or below the firing, axial or tangential air flow, or registers for turbulence adjustment and other features can be provided. This means that the machines can be personalised as required by size and performance in different industrial sectors that offer differ widely one from another.All the combustion heads are obviously available in the versions for liquid, gaseous or mixed fuels.Personalisation in these cases is almost inevitable and entirely feasible with our range, and all such requests are carefully analysed, one by one. Each system can be further distinguished by the equipment provided:- built-in or separately-mounted (wall or console) control panels- electronic or mechanical adjustment- oxygen flow control- flue gas re-circulation- combustion air heated up to 200°C- combustion oil thrust unit- combustion oil heating unit
INDUSTRIAL
BURNERS FOR INDUSTRIAL APPLICATIONS WITH SEPARATE FAN
novanta-cinquecento-mil leser ies
185
TECHNICAL DETAILS
INDUSTRIAL
TP gas series
Type Min modulation
output kWMin application output
kWMax output
kW
TP90A 320 1.610 2.300TP91A 480 1.869 2.670TP92A 480 2.135 3.050TP93A 550 2.870 4.100TP512A 600 3.150 4.500TP515A 770 3.640 5.200TP520A 1.000 4.480 6.400TP525A 2.000 6.825 9.750TP1030 2.500 9.100 13.000TP1050 3.500 10.850 15.500TP1080 3.500 13.300 19.000
TLX gas series LOW NOx
Type Min modulation
output kWMin application output
kWMax output
kW
TLX90 288 1.036 1.480TLX91 674 1.406 2.008TLX510 800 2.275 3.250TLX515 770 3.080 4.400TLX520 1.000 4.060 5.800TLX1025 1.000 6.020 8.600TLX1030 2.600 9.100 13.000
TG series light oil
Type Min modulation
output kWMin application output
kWMax output
kW
TG90 264 1.330 1.900TG91 698 1.465 2.093TG92 849 1.791 2.558TG510 1.314 2.767 3.953TG515 1.628 3.419 4.884TG520 2.326 4.884 6.977TG525 2.000 6.825 9.750TG1030 2.500 9.100 13.000TG1050 3.500 10.850 15.500TG1080 3.500 13.300 19.000
novanta-cinquecento-mil leser ies
186
INDUSTRIAL
TN series heavy oil viscosity up to 400 cSt at 50°C (50°E at 50°C)
Type Min modulation
output kWMin application output
kWMax output
kW
TN90 264 1.330 1.900TN91 698 1.465 2.093TN92 849 1.791 2.558TN510 1.314 2.767 3.953TN515 1.628 3.419 4.884TN520 2.326 4.884 6.977TN525 2.000 6.825 9.750TN1030 2.500 9.100 13.000TN1050 3.500 10.850 15.500TN1080 3.500 13.300 19.000
TPBY series heavy oil pneumatic atomization with viscosity up to 4000 cSt at 50°C (503°E - 50°C)
Type Min modulation
output kWMin application output
kWMax output
kW
TPBY90 670 1.400 2.000TPBY91 500 1.750 2.500TPBY92 700 2.100 3.000TPBY510 1.100 3.500 5.000TPBY515 1.200 4.200 6.000TPBY520 1.400 4.900 7.000TPBY525 2.000 6.825 9.750TPBY1030 2.550 9.100 13.000TPBY1050 3.100 10.850 15.500TPBY1080 3.800 13.300 19.000
HTP series dual fuel gas/light oil
Type Min modulation
output kWMin application output
kWMax output
kW
HTP90A 320 1.610 2.300HTP91A 480 1.869 2.670HTP92A 480 2.135 3.050HTP93A 550 2.870 4.100HTP512A 600 3.150 4.500HTP515A 770 3.640 5.200HTP520A 1.000 4.480 6.400HTP525A 2.000 6.825 9.750HTP1030 2.500 9.100 13.000HTP1050 3.500 10.850 15.500HTP1080 3.500 13.300 19.000
TECHNICAL DETAILS
novanta-cinquecento-mil leser ies
187
INDUSTRIAL
KTP series dual fuel gas/heavy oil with viscosity up to 400 cSt at 50°C (50°E at 50°C)
Type Min modulation
output kWMin application output
kWMax output
kW
KTP90A 320 1.610 2.300KTP91A 480 1.869 2.670KTP92A 480 2.135 3.050KTP93A 550 2.870 4.100KTP512A 600 3.150 4.500KTP515A 770 3.640 5.200KTP520A 1.000 4.480 6.400KTP525A 2.000 6.825 9.750KTP1030 2.500 9.100 13.000KTP1050 3.500 10.850 15.500KTP1080 3.500 13.300 19.000
TECHNICAL DETAILS
Flange air duct Suggested boiler drilling
Burner flange
Referred to the model TPBY515
Flange air duct Suggested boiler drilling
Burner flange
Referred to the model TP1080 - DN125
novanta-cinquecento-mil leser ies
188
URB s e r i e sREGISTER BURNERS FOR INDUSTRIAL APPLICATIONS 7 MW ÷ 67 MW
TECHNICAL DETAILS
URB series multifuel
Type Min modulation
output kWMin application output
kWMax output
kW
URB5 1.167 4.900 7.000URB10 1.700 7.000 10.200URB15 2.567 10.200 15.400URB20 2.983 15.400 17.900URB25 3.783 17.900 22.700URB30 5.050 22.700 30.300URB32 5.533 30.300 33.200URB35 5.967 33.200 35.800URB40 6.917 35.800 41.500URB45 7.750 41.500 46.500URB50 8.500 46.500 51.000URB60 10.067 51.000 60.400URB70 11.167 60.400 67.000
189
NOx BURNERS SERIESThis low CO and NOx emission burner series, was born to comply with the regulations in force.The value of emissions is well below the more severe limits (< 80 mg/kWh) in the range 14 kW to 10.600 kW.Lower emissions equals more fuel saving and respect for the environment.
PBY AIR ATOMIZATION BURNERSThis particular heavy oil burners series up to 400 cSt at 50°C (530°E at 50°C) was developed in order to use compressed air or, upon request, steam as a means of atomization.
SHORT FLAME BURNERS (SERIES VS)This recent application was created to be used on older boilers with short combustion chambers thus requiring a very compact fl ame.
URB BURNERSThis type of burner can vary their fl ame shape by using the air inlet register and can be easily adapted to different appliances. They are particularly suitable to certain applications like water tube steam generators (up to 67 MW).
COMPLEMENTARY SYSTEMS
190
VARIABLE HEADThis engineered solution is particularly suitable for those applications where the min output of the burner must be very low in order to reduce as much as possible, temperature or steam oscillations. For example on steam boilers, industrial plant, low temperature boilers. The ratio that can be achieved (1:10), allows high performance with related energy saving.
ELECTRONIC CAMThe electronic cam permits the control of the various elements that contribute to the correct mixture of fuel and combustion air through particular system programming. The system can also be expanded for interfacing with probes for oxygen control and/or fan speed control by inverter in order to improve performance and achieve the greatest energy savings both in terms of fuel and the electric power required.
PUMPING UNITFor the preparation of the fuel oil supply to the burner, pumping and heating units with electric, mixed electric/steam, or steam-only preheating can be supplied on request.
ELECTRIC CONTROL PANELSRemote console type, cabinet type or wall-mounted electric control panels can be supplied on request.
COMPLEMENTARY SYSTEMS
Head backward
Head forward
191
FANSFor the combustion air supply to the burner, separate fans suitably sized to the specifi c needs of the system can be supplied on request.
GAS TRAINSThe gas trains supplied as standard with the burners can be complete with gas pressure reducing stations if required.
ACOUSTIC HOODS BOXAcoustic hoods can be supplied whenever requested in order to reduce sound pressure levels in medium and high power burners.When used alone or coupled to silencers, these devices can reduce operating noise to well below the levels prescribed in various national standards.
SILENCERSSilencers mounted on the combustion air inlet permit signifi cant reductions in operating noise levels.
COMPLEMENTARY SYSTEMS
INPUT DATA FOR QUOTATION
Via L. Galvani, 9 (Zona Industriale) - 35011 CAMPODARSEGO (PD) - ItalyTel. +39 049 9200944 - Fax +39 049 9201269E-mail uffi cio ordini: [email protected]
S.p.A.
COMPANY ADDRESS
CITY CITY CODE
TEL. / FAX /
BOILER:
MANUFACTURER: MODEL:
BOILER TYPE: SMOKE TUBES WATER TUBES
BOILER OUTPUT: (kW) STEAM PRODUCTION: (kg/h)
BURNER OUTPUT: (kW)
COMBUSTION CHAMBER PRESSURE: (mbar) COMBUSTION AIR TEMPERATURE: (°C)
COMBUSTION CHAMBER SIZE - LENGHT: WIDTH (or dia): HEIGHT:
THERMAL MEDIUM: STEAM WATER OIL HOT AIR
STEAM PRESSURE bar
FEEDING MEDIUM TEMPERATURE: °C
OUTLET MEDIUM TEMPERATURE (water, air, oil) °C
FUEL DATA
FUEL: LOWER CALORIFIC VALUE (kcal/kg):
DENSITY (kg/m3 ): VISCOSITY: E° (at ……………… °C)
FUEL TEMPERATURE: (°C)
PRESSURE AT GAS TRAIN INLET: mbar
OTHER:
GENERAL:
POWER SUPPLY VOLT Hz
COMBUSTION CONTROL: ON-OFF HIGH-LOW FLAME PROGRESSIVE MODULATING
REQUIRED TURN-DOWN 1:
PROBE: TEMPERATURE °C PRESSURE (bar) OTHER
REQUIRED COMPONENTS: BURNER CONTROL PANEL DRAUGHT AIR FAN GAS TRAIN
OIL HANDLING UNIT
BACK OIL PUMP BACK UP OIL FILTER STEAM HEATER ELECTRIC HEATER
DRAUGHT FAN SPECIFICATION (when existing fan is used):
FLOW RATE (m3/h) AT mbar OUTPUT PRESSURE
ELECTRIC MOTOR POWER (kW) BLOWER MODEL
NOTE:
EDIT BY: DATE:
Mod
. 721
-01
- R
ev. 0
0
193
194
NOTES