Zhengzhou Azeus Machinery Co., Ltd

Email:anna@azeusmachinery.com.cn Skype:lixiangfang311

Tel: 0086-371-6599 6917 Fax: 0086-371-6590 3401 MB: 0086-13938450532

Catalogue of floating fish food extruder

Dry Type

Model AZSG60-B AZSG70-B AZSG80-B AZSG90-B

Capacity 120-120KG/H 180-250KG/H 300-350KG/H 400-450KG/H

Power 15+0.4+0.4KW 18.5+0.4+0.4KW 22/27+0.4+1.5KW 30/37+0.4+1.5KW

Screw dia Φ60mm Φ70mm Φ80mm Φ90mm

Model AZSG120-B AZSG135-B AZSG160-B AZSG200-B

Capacity 500-700KG/H 800-1000KG/H 1.2-1.5T/H 1.8-2.0T/H

Power 55+0.4+2.2KW 75+0.4+2.2KW 90+1.5+2.2KW 132+1.5+3.0KW

Screw dia Φ120mm Φ135mm Φ155mm Φ195mm

Wet Type

Model AZSS60-B AZSS70-B AZSS80-B AZSG90-B

Capacity 180-200KG/H 250-300KG/H 350-400KG/H 400-450KG/H

Power 15+0.4+0.75+0.37KW 18.5+0.75+0.75+1.5KW22/30+0.75+0.75+1.5KW 37+1.1+1.1+2.2KW

Screw dia Φ60mm Φ70mm Φ80mm Φ90mm

Model AZSS120-B AZSS135-B AZSS160-B AZSS200-B

Capacity 800-900KG/H 1-1.2T/H 0.8-2.0T/H 2.5-4T/H

Power 55+1.1+1.1+2.2KW 75+1.5+2.2+2.2KW 90+2.2+2.2+3.5KW 132+2.2+3.0+4.5KW

Screw dia Φ120mm Φ135mm Φ155mm Φ195mm

Zhengzhou Azeus Machinery Co., Ltd

Email:anna@azeusmachinery.com.cn Skype:lixiangfang311

Tel: 0086-371-6599 6917 Fax: 0086-371-6590 3401 MB: 0086-13938450532

IntroductionThis is a series of “Dry” (“Wet”) feed extruders, the new generation, suitable for processing of floating and

Demersal fish feed, pet food, Ornamental feed etc.

Working principle:

Moisture of raw material: 16%-22%

Starch content for floating feed: 20%-30%

Pellet diameter is φ0.6-16mm

It’s significantly different between pet food and traditional feeding method. The machine is based on the raw

material of corn, soybean, fish powder, bone powder etc. Then the material can be expanded to pellet feed

which is different shaped, unique taste and rich nutrition, suitable for dog, cat, fish, bird, rabbit fox etc.

Application:

The machine fits for professional farmers, middle & small sized feed factory and research institutions.

Instructions of operation:

1. Start the machine → 2. Add a little water and start the cutter → 3. Add wet material; start the feeder When the

puffed Position in front becomes heat →4. Adjust the cutter speed