Measurement of potential between buried structure and a reference electrode is the most frequent test performed in operation of a cathodic protection system. Test station is a simple method to monitoring this potential in order to ensure that adequate current is supplied to buried metallic structures.
made from high impact strength molded plastic, cast iron and concrete as well. Most of the time, the test stations are
test termination is composed of corrosion resistant nickel plated brass lugs to guarantee long term accurate reading, and all parts is easy to be removed with standard replacement.
CATHODIC PROTECTION TEST STATION
Material Cast Iron, Sheet Steel, Concrete and Molded Plastic
Number of Terminals
Conduit
Color
Locking Device
Ambient Temperature
Climate
Humidity
Documentation
5 -10 nos.
1500 - 2000 mm
Black, Orange, Blue and Gray
Available on Cast Iron and Concrete type
Tag plates and name plate supplied with SS316L with screw sets
Up to 55 degree centigrade
Onshore corrosive environment
95 % at 43 deegre centigrade
60
Type:
Cast Iron Test Station
Up to 10 nos.
Height
Diameter
Color
Door Locker
1500 - 3000 mm
76.2 mm / 3”, 102 mm / 4”
Orange/Gray/White/Red/Blue
Available
Terminal
61
Type:
Sheet Steel Test Station
Terminal Up to 10 nos.
Height
Terminal Box
Color
Door Locker
50 mm diam. x 1500 mm
400 x 250 x 150 mm”
Orange/Gray/White/Red/Blue
Available
62