SECTIONAL DOORSResidencial
Industrial
Sectional Doors
Automatic Devices
High Speed Doors
Automatic Glass Doors
Sectional Doors
Panel and Colours
Composition and Accessories
Residential Sectional Doors
Composition
Accesories
Automatic Devices for Residential Doors
Industrial Sectional Doors
Composition
Accessories
Automatic Devices for Industrial Doors
Recognised Quality
Flexidoor sectional doors fulfil all the safety requirements of theEN 13241-1:2003 standard.
All the safety components, further defined, are anintegral part of our doors. Our customers therefore have the ga-rantee that our products are designed with a view to their safetyand well-being.
Flexidoor
Contents
Technical Assistance
Flexidoor has a specialised and skilled technical
team, both in the commercial and manufacturing
sectors,which offers you all the necessary support
from the planning tothe installation phase. In this
way, safety will be at your side at the time of the
execution of the work.
We all give increasing impotance to the aesthetic
appearance of our homes, since it is essential for us to feel
good in what is, after all, our house. Thus, we provide you
with different types of sectional doors in wide-ranging
shapes so that you can make use of
everything that you desire.
allways
Well-being is allwayson our mind!
Sectional Doors
Sectional door
Aware of the demands of the market, Flexidoor launched
a range of produts that can adapt to i ts
most complex realities. Thus, having as our primary
aim the satisfaction of our customers, we provide
them wi th p roduc ts tha t comb ine qua l i t y,
robustness, aesthetics and class with which they fit
into any type of edifice, i.e. house or building.
Flexibility, Quality, Robustness and Elegance are the
characteristics that best define our doors.
The panel
The panel is a key component in the composition of a
sectional door, appearing in two different shapes: Groove
and Frame. Both have identical characteristics of comfort,
safety, robustness and reliability by virtue of their being
composed of a double steel plate of 0.5 mm in thickness of
40 mm, to which a rubber is applied, providing a perfect
water-tightness, making the door insulated to the
maximum.
The panels Groove (plain) and Frame (cushioned)
are eqipped with an anti-finger catching safety system and
present a wooden effect when seen from outside.
Tecnical Characteristics
Thermal Insulation
Acoustic Insulation
Water tightness
Wind Pressure Load
Colour Range
Sectional Doors
Lacquered Brown Ral 8014
(Groove)
Lacquered in white similar
Ral 9010
Lacquered in G Ral 9006
(Industrial)
rey Coated in PVC wood
imitation (Groove)
Lacquered in Green Ral
(Groove)
Lacquered Beige Ral 1015
(Groove)
Lacquered in Blue Ral
5010 (Groove)
Acrylic paint of 2 Ral components
chosen by the customer
Lacquered in Red
Ral 3000 (Groove)
S a f e t y i s n o t l e f t t o c h a n c e ! ! !
Flexidoor has in its doors a set of solutions wich do not leave the safety of their users to chance. The anti-finger catching system
is one ofe these solutions, not permitting any kind of pinching, even in cases of negligence.
Th e r o b u s t n e s s o f a p r o d u c t ! ! !
The panel used in the manufacture of sectional doors has an interior reinforcement, turning it into a product of remarkable
robustness. The interior reinforcement is an invariable component in panels for industrial and residential doors.
C o m p o s i t i o n o f a F l e x i d o o r D o o r
Acessories are of primary importance in the fabrication and functioning of our doors. As such, each acessory was the subject
of rigorous tests before being selected to be inclued in the manufacturing process, in order to ensure the final quality of the
product and therefore guarentee the utmost satisfaction of all of our customers. accordingly, there were multiple criteria for
the selection of these accessories, of which we wish to highlight the following:
1. Silence during use
2. Durability of materials and, subsequently, of the door
3. Balancing and dimension of lintel
4. Anti-finger pinching safety
H and l e
Flexidoor doors allow the customer to choose between two
different types of hendles: Lever and Embedded.
The decision depends on aesthetic and funtional factors or
simply the personal taste of each customer.
L o c k
O p t i o n a l A c c e s s o r i e s f o ra F l e x i d o o r Doo r
All the sectional doors are equipped with a set of accessories that
provide them with the safety, aesthetic elements and robustness
necessary for their perfect functioning. There is, however, a series of
other extra (optional) accesssories thet may be added to a final
product according to the wishes of the customers. Accessories of this
type are aesthetically an added value for our doors. Flexidoor is a
company that seeks a solution and has something to
say with regard to the manufacturing of these products.
always always
L e v e r H a n d l e E m b e d d e d Ha n d l e|
I n t e r i o r L a t c h
Sectional Doors
Characteristics - Accessories - Options
RE
SID
EN
TIA
L
The use of this accessory is another guaranteee of the safety level of Flexidoor
doors. In the case that a spring breaks, this element is automatically added,
immobilising the door and making it safer. Its use is obligatory, taking into account the
strict observance of current European Standards.
S p r i n g B r e a k a g eD e v i c e
App l i c a t i o n s
F i x e d o n t h e L i n t e lF i x e d t o t h e A n g l e B a r
The central hinges in galvanised
steel unite perfectly all the door panels.
They have an anti-finger catching
system that prevents finger pinching and thus increases
the safety of our doors.
This is another item that contributes to the safety
level of our doors. The cable breakage device with
a tuner is a component that immobilises the door
in the event of discovering a rupture in the steel
cables.
C a b l e B r e a k a g e De v i c ew i t h t u n e r
Mounting RLF Reduced Lintel. Suitable for residencial
construction with reduced lintel, if the lintel (H1) is
between 170mm and 200mm, and with low lintel, if the
lintel is between 200mm and 300mm. These types of
mounting are for span heights (H) bellow 2800mm. To the
reduced lintel the span height (H) is smaller than
2600mm.
Mounting NL Standard Sectional door with normal lintel
(H1) for residential construction. For a span height (H)
bellow 2800mm the arrow lintel is 300mm.
Mounting IL Special sectional door. To determine the
inclination, measure the distance A (A=2000mm) then
measure the distance X.
Note: Usable only up to 8º inclination.
An t i - f i n g e r Ca t c h i n gS y s t emH i n g e
For this reason, the Flexidoor sectional door is equipped with a cable and spring safety breakage device, both manual and automatic.
W h y r i s k i f y o u c a n h a v ea s a f e s o l u t i o n ?
The strong nylon rollers allow a better and more correct
sliding in a a quiet manner.
(On the photo, applied in a superior bracket in a
double pipe, duly protected).
Ou r L i n t e l s !
Support bracket with gal-
vanised steel hinge, adjus-
table in height and depth.
This component has an
anti-finger pinching system
.
An t i - f i n g e r Ca t c h i n gS y s t e m B r a c k e t
N y l o n R o l l e r
R e d u c e d - RF L L i n t e l - N LL i n t e l N o r m a l|
I n c l i n e d - I LL i n t e l
A=
Adjustable bracket to allow
an easy assembly of
the door.
Zinces springs on residential doors, thus avoiding their
deterioration through corrosion.
Bottom Bracket
Sp r i n g s
C o m p o s i t i o n o f t h e D o o r
W i n dows
E x t r a A c c e s s o r i e s
Ve n t i l a t i o n G r i l l e s
P l a i n W i n d o wP l a i n Ac r y l i c
Lozenge WindowP l a i n Ac r y l i c
Squa red WindowP l a i n Ac r y l i c
S u n e f f e c t w i t h 5 a c r y l i c w i n d o w s
The aesthetic appearance, together with safety, is one of the most valued characteristics by Flexidoor.
For that reason, the company has several types of windows that can be furnished with different effects
and materials, according to the taste of each customer. The introduction of this accessory makes the
door aesthetically more pleasing, decisively contributing to the adornment of the location where it is
installed.
S u n e f f e c t w i t h 3 a c r y l i c w i n d o w s
P l a i n W i n d o wD o u b l e L a m i n a t e d G l a s s
P l a i nA l u m i n i u m F r a m e
Squa red WindowD o u b l e L a m i n a t e d G l a s s
P l a i nA l u m i n i u m F r a m e
Lozenge WindowD o u b l e L a m i n a t e d G l a s s
P l a i nA l u m i n i u m F r a m e
D imen s i o n s
W i d t h : 5 3 0 m mHe igh t : 365 m m
C o m m o n d i m e n s i o n sfo r a l l r es i den t i a l doo r
w i n d o w s .
Granu l a t e d G l a s s
A l s o a v a i l a b l e i n :
Da r k G l a s s
Lacquered Aluminium Grille for
better ventilation.
D imen s i o n s
W i d t h : 5 3 0 m mHe igh t : 365 mm
W i d t h : 3 3 8 m mHe igh t : 132 mm
Ventilation Grille with Latch for
evacuation of toxic gases.
D imen s i o n s
Imag e L o c k
De t a i l e
Im a g eS i d e v i ew
De t a i l e
IN
DU
ST
RIA
L
Characteristics / Accessories / Options
Flexidoor industrial doors are the ideal solution for the economisation of
the interior space of the location in which they are installed, since the
panels are places vertically next to the wall or parallel to the roof, avoi-
ding possible accidents.
Note: Reinforcements starting from 5250mm.
Flexidoor doors can be adapted to any building owing to the numerous
types of guides based on innovative techniques. These factors, along with
durability and visibility, are decisive with regard to choosing our products.
A d v a n t a g e s
C o m p o s i t i o n o f t h e D o o r
F l e x i d o o r u p t o s a f e t y s t a n d a r d s !Ou r L i n t e l s !
Mounting NL - Standard sectional door with normal lintel
(H1) for industrial construction. For a span height (H)
between 2800mm and 4500mm the lintel (H1) is 420mm,
for (H) above 4500mm the lintel is 650mm.
Mounting RLF - low lintel. Suitable for industria contruction
with lintels (H1) higher than 320mm and span height
between 2800mm and 4000mm. When the door is manual
or with cable breakage devices, it stands inside the span,
160mm after opening.
Mounting IL - Special sectional door. To determine the
inclination, measure the distance A (A=2000mm), then
measure the distance X.
Mounting HL - Sectional door for industrial construction
with high lintel. The maximum ceiling height is below (L),
400mm. It used with lintels (H1) that are between 800mm
and 4000mm, depending on the size of the door, the
4000mm may be reduced.
Mounting VL - Sectional door with vertical elevation. Used
for high lintels. The lintel (H1) is above or equal to the span
height, plus 450mm.
S p r i n g B r e a k a g e D e v i c e
The use of this accessory is another guarantee of the safety level of Flexidoor doors. In
the case that a spring breaks, this element is automatically added, immobilising the door
and making it safer. Its use is obligatory, taking into account the strict observance of
current European Standards.
C a b l e B r e a k a g e De v i c ew i t h t u n e r
This is another item that
contributes to the safety level of
our doors. The cable breakage
device with a tuner is a
component that immobilises the
door in the event of discovering
a rupture in the steel cables.
I n d u s t r i a l B r a c k e t
The central hinges in galvanised
steel unite perfectly all the door
�������
Support bracket with galvanised steel hinge
adjustable in height and depth.
I n d u s t r i a lH i n g e
N y l o n R o l l e r
Mounting AL and VAL - Sectional door for industrial
construction with high and vertical lintel. Suitable for
doors of any height (H) up to 7000mm with lintels (H1) of
at least 1200mm. The section pipe is squared between
600 a 900mm from beginning of the lintel (MT).
The strong nylon rollers allow a better and
more correct sliding in a quiet manner.
L ow L i n t e l - R F L i n t e l - N LN o r m a l L|
H i g h L i n t e l - H L Ve r t i c a l E l e v a t i o n L i n t e l - V L|
L i n t e l w i t h I n c l i n e d Roo f - I L
Ve r t i c a l E l e v a t i o n L i n t e lL i n t e l ( w / c o r b e l - VA L H i g h E l e v a t i o n ( w / c o r b e l ) - A L|
A =
L
C o m p o s i t i o n o f t h e D o o r
Coun t l e s s o p t i o n s e n s u r i n g t h a t F l e x i d o o ra l w a y s h a s w h a t y o u a r e l o o k i n g f o r ! ! !
I n d u s t r i a l W i n d o w s
Lateral device with steel cable and spring with the objective
of closing a door, with normal lintel and shaft motor or
differential, preventing the respective steel cables from
unrolling.
C a b l e Te n s o r
By turning one of its sides, the
shaft junction enables constantly
similar movements, thus reducing
alignment deviations.
Sw i v e l
Composed of a circular steel chain, its function
is to enable the manual lifting of the door.
D i f f e r e n t i a l
D imen s i o n s
W i d t h :He igh t :
6 8 0 m m3 7 3 m m
Wid th :He igh t :
6 6 3 m m3 4 3 m m
W i d t h : 6 3 0 m mHe igh t : 195 mm
Flexidoor has not overlooked the aesthetic appearance of industrial doors as well. With a framework of synthetic material,
there are three types of windows available in different dimensions.
Lacquered Aluminium Grille
for better ventilation.
Ve n t i l a t i o n G r i l l e
D i men s i o n s
W i d t h : 5 3 0 m mHe igh t : 365 mm
The acrylic or plated panels can be perfectly combined with sandwich panels, providing them with an unsurpassable robustness,
elegance, durability, reliability and thermal insulation.
De t a i l e
I m a g e S i d e V i ew
A door characterised by its elegance, manufactured in aluminium and acrylic profiles, fitting perfectly in any type of space,
whether modernly designed exhibition space or common pavilions, irrespective of their design.
B I G A L USo l u t i o n s t o a n y a p l i c a t i o n ! ! !
BIGALU panels fulfil the strictest safety and quality standards. They
are manufactured in extruded aluminium profiles, making them very
robust and resistant to the most diverse atmospheric conditions.
Furthermore, they provide water-tightness and perfect thermal
insulation due to a high-quality rubber added to the respective
panels fittings. On the other hand, the aluminium used can be
lacquered in any of the colours available in the RAL catalogue,
giving the door a great and unique aesthetic appearance. BIG ALU
also comprises a double acrylic with a thickness of 3 or more mm,
wich enables sunlight to enter, clearly contributing to a better
illumination of the space where the door is installed.
E x t r a A c c e s s o r i e s
QUALITY AUTOMATIONSAdd : #351 &352, Kempegowda Layout, Outer Ring Road, Laggere, Bangalore - 560058. INDIA _ Tel. +91 080 28397671 / + 91 9591975597 / +91 9686077009 Email - [email protected] , Website : www.qualityautomations.com
QUALITY AUTOMATIONSAdd : #351 &352, Kempegowda Layout, Outer Ring Road, Laggere, Bangalore - 560058. INDIA _ Tel. +91 080 28397671 / + 91 9591975597 / +91 9686077009 Email - [email protected] , Website : www.qualityautomations.com