[email protected] | www.cyclonelighting.com Pre-anodized aluminum reflector with a 95% minimum reflection level. Lamp 4K = LED 4000 K (neutral white) MH = Metal halide HPS = High pressure sodium S17=medium base S23, S28 & S18=mogul base QL = Induction PLT = Compact fluorescent 5 mils/127 microns polyester powder coating. Meet the ASTM G7, B117 and D1654. A wide variety of RAL colors is available. Electric High power factor of 90%.Tool-free removable tray with quick-disconnect connectors. 120, 208, 240, 277 or 347 volts available Consult factory for other source and ballast types Luminaire Optic / Electric Finish / Options HID RC2-RC3-RC5 IES type II, III or V Segmented reflector with chimney HID-PLT GR3-GR5 IES type III or V Glass refractor HID-PLT RA3-RA5 IES type III or V Prismatic reflector with cone HID-QL-PLT RT2-RT3-RT5 IES type II, III or V Segmented reflector Options DIM: Dimmable driver 0-10 volts HS: House side shield MOM:Multi optimization monitoring system PC: Button type photocell TFBC: Thermal fold back control LED 3L-5L IES type III or V Segmented reflector Square shape. Cast aluminum hood with cupola top a tapered guard with built-in hinges. 4 lenses mechanically secured. FLAC / FLPC: Clear acrylic / polycarbonate FLAF / FLPF: Frosted acrylic / polycarbonate FLAO / FLPO: Opaline acrylic / polycarbonate FLAP / FLPP: POND acrylic / polycarbonate FLGC: Clear tempered glass Tool-free half-turn locking latch opening system. "V" groove seamless silicone gasket. IP66 weatherproof protection. Stainless steel hardware. For 2 3/8"(6cm)Ø tenon, 0.154"(4mm) wall. CLASSIC CL41P1 EPA: 2.7 ft² Weight: 43 lbs - 20 kg CL41P1
Pre-anodized aluminum reflector with a 95% minimum reflection level.
Lamp4K = LED 4000 K (neutral white)
MH = Metal halideHPS = High pressure sodium
S17=medium baseS23, S28 & S18=mogul base
QL = InductionPLT = Compact fluorescent
5 mils/127 microns polyester powder coating.Meet the ASTM G7, B117 and D1654.
A wide variety of RAL colors is available.
ElectricHigh power factor of 90%.Tool-free removable tray with quick-disconnect connectors.120, 208, 240, 277 or 347 volts available
Consult factory for other source and ballast types
Luminaire
Optic / Electric
Finish / Options
HIDRC2-RC3-RC5IES type II, III or VSegmented reflector with chimney
HID-PLTGR3-GR5IES type III or VGlass refractor
HID-PLTRA3-RA5IES type III or VPrismaticreflectorwith cone
HID-QL-PLTRT2-RT3-RT5IES type II, III or VSegmented reflector
OptionsDIM: Dimmable driver 0-10 voltsHS: House side shieldMOM:Multi optimization monitoring systemPC: Button type photocellTFBC: Thermal fold back control
LED3L-5LIES type III or VSegmented reflector
Square shape. Cast aluminum hood with cupola top a tapered guard with built-in hinges.
IES -TM-21 Calculated L70 is over 75 000 hours IES -TM-21 Reported more than 36 000 hours Equivalency should always be verified by a third party photometric test. See latest results and update on website at www.cyclonelighting.com
LED, HID, InductionType III, V
LED (44W & 67 W)Available in all RAL colors
Tool free accessIP66
Options: Photocell,Dimming, MOM control system,TFBC
