Ccna day1

2

Communications and Services Certifications

3

4

CCNA Exam

Exam Number - 640-801Total Marks - 1000Duration – 90 MtsPassing score – 849Questions -45-55Multiple ChoiceSimulationsDrag and Drop

5

Benefits

Peer Validation Personal Potential Employer

Career advancement

6

Cisco Icons and Symbols

7

Data Networks

Sharing data through the use of floppy disks is not an efficient or cost-effective manner.

Businesses needed a solution that would successfully address the following three problems: • How to avoid duplication of equipment and resources • How to communicate efficiently • How to set up and manage a network

Businesses realized that networking technology could increase productivity while saving money.

8

Networking Devices

Equipment that connects directly to a network segment is referred to as a device.

These devices are broken up into two classifications. End-user devices Network devices

End-user devices include computers, printers, scanners, and other devices that provide services directly to the user.

Network devices include all the devices that connect the end-user devices together to allow them to communicate.

9

Network Interface Card

A network interface card (NIC) is a printed circuit board that provides network communication capabilities to and from a personal computer. Also called a LAN adapter.

10

Hub

Connects a group of Hosts

11

Switch

Switches add more intelligence to data transfer management.

12

Router

Routers are used to connect networks together Route packets of data from one network to another Cisco became the de facto standard of routers because of their high-quality router products Routers, by default, break up a broadcast domain

13

Network Topologies

Network topology defines the structure of the network.

One part of the topology definition is the physical topology, which is the actual layout of the wire or media.

The other part is the logical topology,which defines how the media is accessed by the hosts for sending data.

14

Bus Topology

A bus topology uses a single backbone cable that is terminated at both ends.

All the hosts connect directly to this backbone.

15

Ring Topology

A ring topology connects one host to the next and the last host to the first.

This creates a physical ring of cable.

16

Star Topology

A star topology connects all cables to a central point of concentration.

17

Extended Star Topology

An extended star topology links individual stars together by connecting the hubs and/or switches.This topology can extend the scope and coverage of the network.

18

Mesh TopologyA mesh topology is implemented to provide as much protection as possible from interruption of service. Each host has its own connections to all other hosts. Although the Internet has multiple paths to any one location, it does not adopt the full mesh topology.

19

Physical and Logical Topology

20

LANs, MANs, & WANs

One early solution was the creation of local-area network (LAN) standards which provided an open set of guidelines for creating network hardware and software, making equipment from different companies compatible.

What was needed was a way for information to move efficiently and quickly, not only within a company, but also from one business to another.

The solution was the creation of metropolitan-area networks (MANs) and wide-area networks (WANs).

21

LANs

22

WANs

23

Virtual Private Network

A VPN is a private network that is constructed within a public network infrastructure such as the global Internet. Using VPN, a telecommuter can access the network of the company headquarters through the Internet by building a secure tunnel between the telecommuter’s PC and a VPN router in the headquarters.

24

Bandwidth

25

Measuring Bandwidth

26

Internetworking Devices

27

What Are The Components Of A Network ?

Main OfficeBranch Office

Home Office

Mobile Users

Internet

28

Network Structure & Hierarchy

Distribution Layer

Core Layer

AccessLayer

29

Institute of Electrical and Electronics Engineers (IEEE) 802 Standards

IEEE 802.1: Standards related to network management.

IEEE 802.2: General standard for the data link layer in the OSI Reference Model. The IEEE divides this layer into two sublayers -- the logical link control (LLC) layer and the media access control (MAC) layer.

IEEE 802.3: Defines the MAC layer for bus networks that use CSMA/CD. This is the basis of the Ethernet standard.

IEEE 802.4: Defines the MAC layer for bus networks that use a token-passing mechanism (token bus networks).

IEEE 802.5: Defines the MAC layer for token-ring networks.

IEEE 802.6: Standard for Metropolitan Area Networks (MANs)

30

31

Why do we need the OSI Model?

To address the problem of networks increasing in size and in number, the International Organization for Standardization (ISO) researched many network schemes and recognized that there was a need to create a network model

This would help network builders implement networks that could communicate and work together

ISO therefore, released the OSI reference model in 1984.

32

Don’t Get Confused.

ISO - International Organization for Standardization

OSI - Open System Interconnection

IOS - Internetwork Operating SystemTo avoid confusion, some people say “International Standard Organization.”

33

The OSI Reference Model

7 Application

6 Presentation

5 Session

4 Transport

3 Network

2 Data Link

1 Physical

The OSI Model will be used throughout your entire networking career!

Memorize it!

34

OSI Model

Data Flow Layers

Transport

Data-Link

Network

Physical

Application (Upper) Layers

Session

Presentation

Application

35

Layer 7 - The Application Layer

7 Application

6 Presentation

5 Session

4 Transport

3 Network

2 Data Link

1 Physical

This layer deal with networking applications.

Examples: Email Web browsers

PDU - User Data

Each of the layers have Protocol Data Unit (PDU)

36

Layer 6 - The Presentation Layer

7 Application

6 Presentation

5 Session

4 Transport

3 Network

2 Data Link

1 Physical

This layer is responsible for presenting the data in the required format which may include:Code FormattingEncryptionCompression

PDU - Formatted Data

37

Layer 5 - The Session Layer

7 Application

6 Presentation

5 Session

4 Transport

3 Network

2 Data Link

1 Physical

This layer establishes, manages, and terminates sessions between two communicating hosts.Creates Virtual CircuitCoordinates communication between systems Organize their communication by offering three different modes

SimplexHalf DuplexFull Duplex

Example: Client Software

( Used for logging in)

PDU - Formatted Data

38

Half Duplex

• It uses only one wire pair with a digital signal running in both directions on the wire.

• It also uses the CSMA/CD protocol to help prevent collisions and to permit retransmitting if a collision does occur.

• If a hub is attached to a switch, it must operate in half-duplex mode because the end stations must be able to detect collisions.

• Half-duplex Ethernet—typically 10BaseT—is only about 30 to 40 percent efficient because a large 10BaseT network will usually only give you 3 to 4Mbps—at most.

39

Full Duplex

In a network that uses twisted-pair cabling, one pair is used to carry the transmitted signal from one node to the other node. A separate pair is used for the return or received signal. It is possible for signals to pass through both pairs simultaneously. The capability of communication in both directions at once is known as full duplex.

40

Layer 4 - The Transport Layer

7 Application

6 Presentation

5 Session

4 Transport

3 Network

2 Data Link

1 Physical

This layer breaks up the data from the sending host and then reassembles it in the receiver.

It also is used to insure reliable data transport across the network.Can be reliable or unreliableSequencingAcknowledgmentRetransmissionFlow Control

PDU - Segments

41

Layer 3 - The Network Layer

7 Application

6 Presentation

5 Session

4 Transport

3 Network

2 Data Link

1 Physical

Sometimes referred to as the “Cisco Layer”.End to End DeliveryProvide logical addressing that routers use for path determinationSegments are encapsulatedInternetwork CommunicationPacket forwardingPacket FilteringMakes “Best Path Determination”Fragmentation

PDU – Packets – IP/IPX

42

Layer 2 - The Data Link Layer

7 Application

6 Presentation

5 Session

4 Transport

3 Network

2 Data Link

1 Physical

Performs Physical AddressingThis layer provides reliable transit of data across a physical link.Combines bits into bytes and bytes into framesAccess to media using MAC addressError detection, not correctionLLC and MACLogical Link Control performs Link establishmentMAC Performs Access method

PDU - FramesPreamble DMAC SMAC Data length DATA FCS

43

Layer 1 - The Physical Layer

7 Application

6 Presentation

5 Session

4 Transport

3 Network

2 Data Link

1 Physical

This is the physical media through which the data, represented as electronic signals, is sent from the source host to the destination host.

Move bits between devicesEncodingPDU - Bits

44

Data Encapsulation

Transport

Data-Link

Physical

Network

Upper-Layer Data

Upper-Layer DataTCP Header

DataIP Header

DataLLC Header

0101110101001000010

DataMAC Header

Presentation

Application

Session

Segment

Packet

Bits

Frame

PDU

FCS

FCS

45

Data Encapsulation

46

OSI Model Analogy Application Layer - Source

Host

After riding your new bicycle a few times in Bangalore, you decide that you want to give it to a friend who lives in DADAR, Mumbai.

47

OSI Model Analogy Presentation Layer - Source

Host

Make sure you have the proper directions to disassemble and reassemble the bicycle.

48

OSI Model Analogy Session Layer - Source Host

Call your friend and make sure you have his correct address.

49

OSI Model Analogy Transport Layer - Source Host

Disassemble the bicycle and put different pieces in different boxes. The boxes are labeled “1 of 3”, “2 of 3”, and “3 of 3”.

50

OSI Model Analogy Network Layer - Source Host

Put your friend's complete mailing address (and yours) on each box.Since the packages are too big for your mailbox (and since you don’t have enough stamps) you determine that you need to go to the post office.

51

OSI Model Analogy Data Link Layer – Source Host

Bangalore post office takes possession of the boxes.

52

OSI Model Analogy Physical Layer - Media

The boxes are flown from Bangalore to Mumbai.

53

OSI Model Analogy Data Link Layer - Destination

Dadar post office receives your boxes.

54

OSI Model Analogy Network Layer - Destination

Upon examining the destination address, Dadar post office determines that your boxes should be delivered to your written home address.

55

OSI Model Analogy Transport Layer - Destination

Your friend calls you and tells you he got all 3 boxes and he is having another friend named BOB reassemble the bicycle.

56

OSI Model Analogy Session Layer - Destination

Your friend hangs up because he is done talking to you.

57

OSI Model Analogy Presentation Layer -

Destination

BOB is finished and “presents” the bicycle to your friend. Another way to say it is that your friend is finally getting him “present”.

58

OSI Model Analogy Application Layer - Destination

Your friend enjoys riding his new bicycle in Dadar.

59

Data Flow Through a Network

60

Type of Transmission

UnicastMulticastBroadcast

61

Type of Transmission

62

Broadcast Domain

A group of devices receiving broadcast frames initiating from any device within the group

Routers do not forward broadcast frames, broadcast domains are not forwarded from one broadcast to another.

63

Collision

The effect of two nodes sending transmissions simultaneously in Ethernet. When they meet on the physical media, the frames from each node collide and are damaged.

64

Collision Domain

The network area in Ethernet over which frames that have collided will be detected.

Collisions are propagated by hubs and repeaters

Collisions are Not propagated by switches, routers, or bridges

65

Physical Layer

Defines

• Media type

• Connector type

• Signaling type

Eth

ern

et

802.

3

V.3

5

Ph

ysic

al

EIA

/TIA

-232

802.3 is responsible for LANs based on the carrier sense multiple access collision detect (CSMA/CD) access methodology. Ethernet is an example of a CSMA/CD network.

66

Physical Layer: Ethernet/802.3

Hub

Hosts

Host

10Base2—Thin Ethernet10Base5—Thick Ethernet

10BaseT—Twisted Pair

67

Device Used At Layer 1

A B C D

Physical

• All devices are in the same collision domain.

• All devices are in the same broadcast domain.

• Devices share the same bandwidth.

68

Hubs & Collision Domains

• More end stations means more collisions.

• CSMA/CD is used.

69

Layer 2

DataSource Address FCSLengthDestination Address

Variable266 4

0000.0C xx.xxxx

Vendor Assigned

IEEE Assigned

MAC Layer—802.3

Preamble

Ethernet II uses “Type” here and does not use 802.2.

MAC Address

8Number of Bytes

synchronize senders and receivers

70

Devices On Layer 2(Switches & Bridges)

• Each segment has its own collision domain.

• All segments are in the same broadcast domain.

Data-Link

OR1 2 3 1 24

71

Switches

• Each segment is its own collision domain.

• Broadcasts are forwarded to all segments.

Memory

Switch

72

Layer 3 : Network Layer

• Defines logical source and destination addresses associated with a specific protocol

• Defines paths through network

Net

wo

rk

IP, IPX

Dat

a-L

ink

Ph

ysic

al

EIA/TIA-232V.35

Eth

ern

et

Fra

me

Rel

ay

HD

LC

802.2

802.3

73

Layer 3 : (cont.)

DataSource

AddressDestination

AddressIP Header

172.15.1.1

NodeNetwork

Logical Address

Network Layer End-Station Packet

Route determination occurs at this layer, so a packet must include a source and destination address.Network-layer addresses have two components: a network component for internetwork routing, and a node number for a device-specific address. The example in the figure is an example of an IP packet and address.

74

Layer 3 (cont.)

11111111 11111111 00000000 00000000

10101100 00010000 01111010 11001100

BinaryMask

BinaryAddress

172.16.122.204 255.255.0.0

172 16 122 204

255

Address Mask

255 0 0

Network Host

75

Device On Layer 3Router

• Broadcast control

• Multicast control

• Optimal path determination

• Traffic management

• Logical addressing

• Connects to WAN services

76

Layer 4 : Transport Layer

• Distinguishes between upper-layer applications

• Establishes end-to-end connectivity between applications

• Defines flow control

• Provides reliable or unreliable services for data transfer

Net

wo

rk

IPXIP

Tra

nsp

ort

SPXTCP UDP

77

Reliable Service

Synchronize

Acknowledge, Synchronize

Acknowledge

Data Transfer

(Send Segments)

Sender Receiver

Connection EstablishedConnection EstablishedConnection EstablishedConnection Established

78

How They Operate

Hub Bridge Switch Router

Collision Domains:

1 4 4 4 Broadcast Domains:

1 1 1 4

79

80

Why Another Model?

Although the OSI reference model is universally recognized, the historical and technical open standard of the Internet is Transmission Control Protocol / Internet Protocol (TCP/IP).

The TCP/IP reference model and the TCP/IP protocol stack make data communication possible between any two computers, anywhere in the world, at nearly the speed of light.

The U.S. Department of Defense (DoD) created the TCP/IP reference model because it wanted a network that could survive any conditions, even a nuclear war.

81

TCP/IP Protocol StackTCP/IP Protocol Stack

7

6

5

4

3

2

5

4

3

2

Application

Presentation

Session

Transport

Network

Data-Link

Physical1

Application

Transport

Internet

Data-Link

Physical1

82

Application Layer OverviewApplication Layer Overview

*Used by the Router

Application

Transport

Internet

Data-Link

Physical

File Transfer- TFTP*- FTP*- NFS

E-Mail- SMTP

Remote Login- Telnet*- rlogin*

Network Management- SNMP*

Name Management- DNS*

File Transfer- TFTP*- FTP*- NFS

E-Mail- SMTP

Remote Login- Telnet*- rlogin*

Network Management- SNMP*

Name Management- DNS*

83

Transport Layer OverviewTransport Layer Overview

Transmission ControlProtocol (TCP)

User Datagram Protocol (UDP)

Transmission ControlProtocol (TCP)


Application

Transport

Internet

Data-Link

Physical

Connection-Oriented

Connectionless

84

TCP Segment FormatTCP Segment Format

Source Port (16) Destination Port (16)

Sequence Number (32)

HeaderLength (4)

Acknowledgment Number (32)

Reserved (6) Code Bits (6) Window (16)

Checksum (16) Urgent (16)

Options (0 or 32 if Any)

Data (Varies)

20Bytes

Bit 0 Bit 15 Bit 16 Bit 31

85

Port NumbersPort Numbers

TCP

Port Numbers

FTP

TransportLayer

TELNET

DNS

SNMP

TFTP

SMTP

UDP

ApplicationLayer

2121 2323 2525 5353 6969 161161

RIP

520520

86

TCP Port NumbersTCP Port Numbers

SourcePort

SourcePort

DestinationPort

DestinationPort ……

Host A

10281028 2323 ……

SP DP

Host ZTelnet Z

Destination port = 23.

Send packet to my

Telnet

application.

87

TCP Port Numbers

mk:@MSITStore:D:%5CBootcamp%5CBootCampPPTs%5C640-801%20Cisco%20CCNA%5CCCNA_Cisco_Certified_Network_Associate_Study_Guide.chm::/8153final/images/f02%2D07%5F0%2Ejpg

88

Send SYN (seq = 100 ctl = SYN)

SYN Received

Send SYN, ACK (seq = 300 ack = 101 ctl = syn,ack)

Established(seq = 101 ack = 301 ctl = ack)

Host A Host B

1

2

3

SYN Received

TCP Three-Way Handshake/Open Connection

TCP Three-Way Handshake/Open Connection

89

Opening & Closing Connection

90

Windowing

• Windowing in networking means the quantity of data segments which is measured in bytes that a machine can transmit/send on the network without receiving an acknowledgement

91• Window Size = 1

Sender ReceiverSend 1

Receive 1

Receive ACK 2 Send ACK 2

Send 2Receive 2

Receive ACK 3Send ACK 3

Send 3Receive 3

Receive ACK 4 Send ACK 4

TCP Simple Acknowledgment

TCP Simple Acknowledgment

92

TCP Sequence and Acknowledgment Numbers

TCP Sequence and Acknowledgment Numbers

SourcePort

SourcePort

DestinationPort

DestinationPort ……

SequenceSequence AcknowledgmentAcknowledgment

10281028 2323

Source Dest.

11111111

Seq.

101101

Ack.

10281028 2323

Source Dest.

10101010

Seq.

100100

Ack.

102810282323

Source Dest.

11111111

Seq.

100100

Ack.

102810282323

Source Dest.

12121212

Seq.

101101

Ack.

I just got number11, now I need number 12.

I justsent number11.

93

Windowing

There are two window sizes—one set to 1 and one set to 3.

When you’ve configured a window size of 1, the sending machine waits for an acknowledgment for each data segment it transmits before transmitting another

If you’ve configured a window size of 3, it’s allowed to transmit three data segments before an acknowledgment is received.

94

Windowing

95

Transport Layer Reliable Delivery

96

Flow Control

Another function of the transport layer is to provide optional flow control.

Flow control is used to ensure that networking devices don’t send too much information to the destination, overflowing its receiving buffer space, and causing it to drop the sent information

The purpose of flow control is to ensure the destination doesn't get overrun by too much information sent by the source

97

Flow Control

SEQ 1024

SEQ 2048

SEQ 3072

AB

30723

Ack 3073 Win 0

Ack 3073 Win

3072

98


User Datagram Protocol (UDP) is the connectionless transport protocol in the TCP/IP protocol stack.

UDP is a simple protocol that exchanges datagrams, without acknowledgments or guaranteed delivery. Error processing and retransmission must be handled by higher layer protocols.

UDP is designed for applications that do not need to put sequences of segments together.

The protocols that use UDP include: • TFTP (Trivial File Transfer Protocol) • SNMP (Simple Network Management Protocol) • DHCP (Dynamic Host Control Protocol) • DNS (Domain Name System)

99

• No sequence or acknowledgment fields

UDP Segment FormatUDP Segment Format

Source Port (16) Destination Port (16)

Length (16)

Data (if Any)

1Bit 0 Bit 15 Bit 16 Bit 31

Checksum (16)

8Bytes

100

TCP vs UDP

101

Internet Layer OverviewInternet Layer Overview

•In the OSI reference model, the network layer corresponds to the TCP/IP Internet layer.

Internet Protocol (IP)

Internet Control MessageProtocol (ICMP)

Address ResolutionProtocol (ARP)

Reverse AddressResolution Protocol (RARP)

Internet Protocol (IP)

Internet Control MessageProtocol (ICMP)

Address ResolutionProtocol (ARP)

Reverse AddressResolution Protocol (RARP)

Application

Transport

Internet

Data-Link

Physical

102

IP DatagramIP Datagram

Version(4)

Destination IP Address (32)

Options (0 or 32 if Any)

Data (Varies if Any)

1Bit 0 Bit 15 Bit 16 Bit 31

HeaderLength (4)

Priority &Type of Service (8) Total Length (16)

Identification (16)Flags

(3) Fragment Offset (13)

Time-to-Live (8) Protocol (8) Header Checksum (16)

Source IP Address (32)

20Bytes

103

•Determines destination upper-layer protocol

Protocol FieldProtocol Field

TransportLayer

InternetLayer

TCP UDP

ProtocolNumbers

IP

176

104

Internet Control Message Protocol

Internet Control Message Protocol

Application

Transport

Internet

Data-Link

Physical

Destination Unreachable

Echo (Ping)

Other

ICMP1

105

Address Resolution Protocol

Address Resolution Protocol

• Map IP MAC

• Local ARP

172.16.3.1

IP: 172.16.3.2 Ethernet: 0800.0020.1111 IP: 172.16.3.2 Ethernet: 0800.0020.1111

172.16.3.2

IP: 172.16.3.2 = ???IP: 172.16.3.2 = ???

I heard that broadcast. The message is for me. Here is my Ethernet address.

I need the Ethernet address of 176.16.3.2.

106

Reverse ARPReverse ARP

• Map MAC IP

Ethernet: 0800.0020.1111IP: 172.16.3.25

Ethernet: 0800.0020.1111IP: 172.16.3.25

Ethernet: 0800.0020.1111 IP = ???Ethernet: 0800.0020.1111 IP = ???

What is my IP address?

I heard that broadcast. Your IP address is 172.16.3.25.

107

108

Found by Xerox Palo Alto Research Center (PARC) in 1975

Original designed as a 2.94 Mbps system to connect 100 computers on a 1 km cable

Later, Xerox, Intel and DEC drew up a standard support 10 Mbps – Ethernet II

Basis for the IEEE’s 802.3 specification

Most widely used LAN technology in the world

Origin of Ethernet

109

10 Mbps IEEE Standards - 10BaseT

• 10BaseT 10 Mbps, baseband, over Twisted-pair cable

• Running Ethernet over twisted-pair wiring as specified by IEEE 802.3

• Configure in a star pattern

• Twisting the wires reduces EMI

• Fiber Optic has no EMI

Unshielded twisted-pair

RJ-45 Plug and Socket

110

Unshielded Twisted Pair Cable (UTP)most popularmaximum length 100 mprone to noise

Category 1Category 2Category 3Category 4Category 5Category 6

Voice transmission of traditional telephoneFor data up to 4 Mbps, 4 pairs full-duplexFor data up to 10 Mbps, 4 pairs full-duplexFor data up to 16 Mbps, 4 pairs full-duplexFor data up to 100 Mbps, 4 pairs full-duplexFor data up to 1000 Mbps, 4 pairs full-duplex

Twisted Pair Cables

111

Baseband Transmission Entire channel is used to transmit a single digital signal Complete bandwidth of the cable is used by a single

signal The transmission distance is shorter The electrical interference is lower

Broadband Transmission Use analog signaling and a range of frequencies Continuous signals flow in the form of waves Support multiple analog transmission (channels)

Modem Broadband Transmission

Network Card

Baseband Transmission

Baseband VS Broadband

112

Straight-through cable

113

Straight-through cable pinout

114

Crossover cable

115

Crossover cable

116

Rollover cable

117

Rollover cable pinout

118

Straight-Thru or Crossover

Use straight-through cables for the following cabling:

Switch to router Switch to PC or server Hub to PC or server

Use crossover cables for the following cabling: Switch to switch Switch to hub Hub to hub Router to router PC to PC Router to PC

119

120

Decimal to Binary

100 = 1101 = 10102 = 100103 = 1000

110100

1000

172 – Base 10

1248163264

128

10101100– Base 2

20 = 121 = 222 = 423 = 824 = 1625 = 3226 = 6427 = 128

10101100

172

270

100

172

00480

320

128

172

121

Base 2 Number System

101102 = (1 x 24 = 16) + (0 x 23 = 0) + (1 x 22 = 4) + (1 x 21 = 2) + (0 x 20 = 0) = 22

122

Converting Decimal to Binary

Convert 20110 to binary: 201 / 2 = 100 remainder 1 100 / 2 = 50 remainder 0 50 / 2 = 25 remainder 0 25 / 2 = 12 remainder 1 12 / 2 = 6 remainder 0 6 / 2 = 3 remainder 0 3 / 2 = 1 remainder 1 1 / 2 = 0 remainder 1

When the quotient is 0, take all the remainders in

reverse order for your answer: 20110 = 110010012

123

Binary to Decimal Chart

124

Hex to Binary to Decimal Chart

125

– Unique addressing allows communication between end stations.

– Path choice is based on destination address.

• Location is represented by an address

Introduction to TCP/IP Addresses

Introduction to TCP/IP Addresses

172.18.0.2

172.18.0.1

172.17.0.2172.17.0.1

172.16.0.2

172.16.0.1

SA DAHDR DATA10.13.0.0 192.168.1.0

10.13.0.1 192.168.1.1

126

IP AddressingIP Addressing

255 255 255 255

DottedDecimal

Maximum

Network Host

128 64 32 16 8 4 2 1

11111111 11111111 11111111 11111111

10101100 00010000 01111010 11001100

Binary

32 Bits

172 16 122 204ExampleDecimal

ExampleBinary

1 8 9 16 17 24 25 32

128 64 32 16 8 4 2 1

128 64 32 16 8 4 2 1

128 64 32 16 8 4 2 1

127

•Class A:

•Class B:

•Class C:

•Class D: Multicast

•Class E: Research

IP Address ClassesIP Address Classes

NetworkNetwork HostHost HostHost HostHost

NetworkNetwork NetworkNetwork HostHost HostHost

NetworkNetwork NetworkNetwork NetworkNetwork HostHost

8 Bits 8 Bits 8 Bits 8 Bits

128

IP Address ClassesIP Address Classes1

Class A:

Bits:

0NNNNNNN0NNNNNNN HostHost HostHost HostHost

8 9 16 17 24 25 32

Range (1-126)

1

Class B:

Bits:

10NNNNNN10NNNNNN NetworkNetwork HostHost HostHost

8 9 16 17 24 25 32

Range (128-191)1

Class C:

Bits:

110NNNNN110NNNNN NetworkNetwork NetworkNetwork HostHost

8 9 16 17 24 25 32

Range (192-223)1

Class D:

Bits:

1110MMMM1110MMMM Multicast GroupMulticast Group Multicast GroupMulticast Group Multicast GroupMulticast Group

8 9 16 17 2425 32

Range (224-239)

129

Host AddressesHost Addresses172.16.2.2

172.16.3.10

172.16.12.12

10.1.1.1

10.250.8.11

10.180.30.118

E1

172.16 12 12

Network Host

. . Network Interface

172.16.0.0

10.0.0.0

E0

E1

Routing Table

172.16.2.1

10.6.24.2

E0

130

Classless Inter-Domain Routing (CIDR)

• Basically the method that ISPs (Internet Service Providers) use to allocate an amount of addresses to a company, a home

• Ex : 192.168.10.32/28 • The slash notation (/) means how many

bits are turned on (1s)

131

CIDR Values

132

11111111

Determining Available Host Addresses

Determining Available Host Addresses

172 16 0 0

10101100 00010000 00000000 00000000

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

Network Host

00000000 00000001

11111111 11111111 11111111 11111110

...

... 00000000 00000011

11111101

123

655346553565536–

...

2

65534

N

2N – 2 = 216 – 2 = 65534

133

IP Address Classes Exercise

IP Address Classes Exercise

Address Class Network Host

10.2.1.1

128.63.2.100

201.222.5.64

192.6.141.2

130.113.64.16

256.241.201.10

134

IP Address Classes Exercise Answers

IP Address Classes Exercise Answers

Address Class Network Host

10.2.1.1

128.63.2.100

201.222.5.64

192.6.141.2

130.113.64.16

256.241.201.10

A

B

C

C

B

Nonexistent

10.0.0.0

128.63.0.0

201.222.5.0

192.6.141.0

130.113.0.0

0.2.1.1

0.0.2.100

0.0.0.64

0.0.0.2

0.0.64.16

135

Subnetting

Subnetting is logically dividing the network by extending the 1’s used in SNM

AdvantageCan divide network in smaller partsRestrict Broadcast trafficSecuritySimplified Administration

136

Formula

Number of subnets – 2x-2Where X = number of bits borrowed

Number of Hosts – 2y-2Where y = number of 0’s

Block Size = Total number of AddressBlock Size = 256-Mask

137

Subnetting Classful IP Addressing SNM are a set of 255’s and

0’s. In Binary it’s contiguous 1’s and 0’s. SNM cannot be any value as it won’t follow the

rule of contiguous 1’s and 0’s. Possible subnet mask values

– 0– 128– 192– 224– 240– 248– 252– 254– 255

138• Network 172.16.0.0

172.16.0.0

Addressing Without Subnets

Addressing Without Subnets

172.16.0.1 172.16.0.2 172.16.0.3

…...

172.16.255.253 172.16.255.254

139• Network 172.16.0.0

Addressing with SubnetsAddressing with Subnets

172.16.1.0 172.16.2.0

172.16.3.0

172.16.4.0

140

Subnet AddressingSubnet Addressing172.16.2.200

172.16.2.2

172.16.2.160

172.16.2.1

172.16.3.5

172.16.3.100

172.16.3.150

E0

172.16

Network

Network Interface

172.16.0.0

172.16.0.0

E0

E1

New Routing Table

2 160

Host

. .

172.16.3.1E1

141

Subnet AddressingSubnet Addressing172.16.2.200

172.16.2.2

172.16.2.160

172.16.2.1

172.16.3.5

172.16.3.100

172.16.3.150

172.16.3.1

E0E1

172.16 2 160

Network Host

. . Network Interface

172.16.2.0

172.16.3.0

E0

E1

New Routing Table

Subnet

142

Subnet MaskSubnet Mask

172172 1616 00 00

255255 255255 00 00

255255 255255 255255 00

IPAddress

DefaultSubnet

Mask

8-BitSubnet

Mask

Network Host

Network Host

Network Subnet Host

• Also written as “/16,” where 16 represents the number of 1s in the mask

• Also written as “/24,” where 24 represents the number of 1s in the mask

11111111 11111111 00000000 00000000

143

Decimal Equivalents of Bit Patterns

Decimal Equivalents of Bit Patterns

0 0 0 0 0 0 0 0 = 0

1 0 0 0 0 0 0 0 = 128

1 1 0 0 0 0 0 0 = 192

1 1 1 0 0 0 0 0 = 224

1 1 1 1 0 0 0 0 = 240

1 1 1 1 1 0 0 0 = 248

1 1 1 1 1 1 0 0 = 252

1 1 1 1 1 1 1 0 = 254

1 1 1 1 1 1 1 1 = 255

128 64 32 16 8 4 2 1

144

16

Network Host

172 0 0

10101100

11111111

10101100

00010000

11111111

00010000

00000000

00000000

10100000

00000000

00000000

•Subnets not in use—the default

00000010

Subnet Mask Without Subnets

Subnet Mask Without Subnets

172.16.2.160172.16.2.160

255.255.0.0 255.255.0.0

NetworkNumber

145

•Network number extended by eight bits

Subnet Mask with Subnets

Subnet Mask with Subnets

16

Network Host

172.16.2.160172.16.2.160

255.255.255.0 255.255.255.0

172 2 0

10101100

11111111

10101100

00010000

11111111

00010000

11111111

00000010

10100000

00000000

00000000

00000010

Subnet

NetworkNumber

128

192

224

240

248

252

254

255

146

Subnet Mask with Subnets (cont.)

Subnet Mask with Subnets (cont.)

Network Host

172.16.2.160172.16.2.160

255.255.255.192 255.255.255.192

10101100

11111111

10101100

00010000

11111111

00010000

11111111

00000010

10100000

11000000

10000000

00000010

Subnet

•Network number extended by ten bits

16172 2 128

NetworkNumber

128

192

224

240

248

252

254

255

128

192

224

240

248

252

254

255

147

Subnet Mask ExerciseSubnet Mask Exercise

Address Subnet Mask Class Subnet

172.16.2.10

10.6.24.20

10.30.36.12

255.255.255.0

255.255.240.0

255.255.255.0

148

Subnet Mask Exercise Answers

Subnet Mask Exercise Answers

Address Subnet Mask Class Subnet

172.16.2.10

10.6.24.20

10.30.36.12

255.255.255.0

255.255.240.0

255.255.255.0

B

A

A

172.16.2.0

10.6.16.0

10.30.36.0

149

Broadcast AddressesBroadcast Addresses

172.16.1.0

172.16.2.0

172.16.3.0

172.16.4.0

172.16.3.255(Directed Broadcast)

255.255.255.255(Local Network Broadcast)

XX

172.16.255.255(All Subnets Broadcast)

150

Addressing Summary Example

Addressing Summary Example

10101100

11111111

10101100

00010000

11111111

00010000

11111111

00000010

10100000

11000000

10000000

00000010

10101100 00010000 00000010 10111111

10101100 00010000 00000010 10000001

10101100 00010000 00000010 10111110

Host

Mask

Subnet

Broadcast

Last

First

172.16.2.160

255.255.255.192

172.16.2.128

172.16.2.191

172.16.2.129

172.16.2.190

1

2

3

4

56

7

89

16172 2 160

151

IP Host Address: 172.16.2.121Subnet Mask: 255.255.255.0

• Subnet Address = 172.16.2.0

• Host Addresses = 172.16.2.1–172.16.2.254

• Broadcast Address = 172.16.2.255

• Eight Bits of Subnetting

Network Subnet Host

10101100 00010000 00000010 11111111

172.16.2.121:

255.255.255.0:

10101100

11111111

Subnet: 10101100 00010000

00010000

11111111

00000010

00000010

11111111

01111001

00000000

00000000

Class B Subnet ExampleClass B Subnet Example

Broadcast:

Network

152

Subnet PlanningSubnet Planning

Other Subnets

192.168.5.16

192.168.5.32 192.168.5.48

20 Subnets

5 Hosts per Subnet

Class C Address:

192.168.5.0

20 Subnets

5 Hosts per Subnet

Class C Address:

192.168.5.0

153

11111000

IP Host Address: 192.168.5.121Subnet Mask: 255.255.255.248

Network Subnet Host

192.168.5.121: 11000000

11111111

Subnet: 11000000 10101000

10101000

11111111

00000101

00000101

11111111

01111001

01111000

255.255.255.248:

Class C Subnet Planning Example

Class C Subnet Planning Example

• Subnet Address = 192.168.5.120

• Host Addresses = 192.168.5.121–192.168.5.126

• Broadcast Address = 192.168.5.127

• Five Bits of Subnetting

Broadcast:

NetworkNetwork

11000000 10101000 00000101 01111111

154

Exercise

• 192.168.10.0• /27

? – SNM? – Block Size?- Subnets

155

Exercise

• /27

? – SNM – 224? – Block Size = 256-224 = 32?- Subnets

Subnets 10.0 10.32 10.64

FHID 10.1 10.33

LHID 10.30 10.62

Broadcast 10.31 10.63

156

Exercise

• 192.168.10.0• /30

? – SNM? – Block Size?- Subnets

157

Exercise

• /30

? – SNM – 252? – Block Size = 256-252 = 4?- Subnets

Subnets 10.0 10.4 10.8

FHID 10.1 10.5

LHID 10.2 10.6

Broadcast 10.3 10.7

158

Exercise

Mask Subnets

Host

/26 ? ? ?/27 ? ? ?/28 ? ? ?/29 ? ? ?/30 ? ? ?

159

Exercise

Mask Subnets

Host

/26 192 4 62/27 224 8 30/28 240 16 14/29 248 32 6/30 252 64 2

160

Exam Question

• Find Subnet and Broadcast address– 192.168.0.100/27

161

Exercise

192.168.10.54 /29Mask ?Subnet ?Broadcast ?

162

Exercise


163

Exercise


164

Exercise


165

Exercise


166

Class B

172.16.0.0 /19Subnets ?Hosts ?Block Size ?

167

Class B

172.16.0.0 /19Subnets 23 -2 = 6Hosts 213 -2 = 8190Block Size 256-224 = 32

Subnets 0.0 32.0 64.0 96.0

FHID 0.1 32.1 64.1 96.1

LHID 31.254 63.254 95.254 127.254

Broadcast 31.255 63.255 95.255 127.255

168

Class B


169

Class B


Subnets 0.0 0.32 0.64 0.96

FHID 0.1 0.33 0.65 0.97

LHID 0.30 0.62 0.94 0.126

Broadcast 0.31 0.63 0.95 0.127

170

Class B


171

Class B


Subnets 0.0 2.0 4.0 6.0

FHID 0.1 2.1 4.1 6.1

LHID 1.254 3.254 5.254 7.254

Broadcast 1.255 3.255 5.255 7.255

172

Class B


173

Class B


Subnets 0.0 1.0 2.0 3.0

FHID 0.1 1.1 2.1 3.1

LHID 0.254 1.254 2.254 3.254

Broadcast 0.255 1.255 2.255 3.255

174

Class B


175

Class B


Subnets 0.0 0.128 1.0 1.128 2.0 2.128

FHID 0.1 0.129 1.1 1.129 2.1 2.129

LHID 0.126 0.254 1.126 1.254 2.126 2.254

Broadcast

0.127 0.255 1.127 1.255 2.127 2.255

177

Find out Subnet and Broadcast Address

• 172.16.85.30/29

178


• 172.30.101.62/23

179


• 172.20.210.80/24

180

Exercise

• Find out the mask which gives 100 subnets for class B

181

Exercise

• Find out the Mask which gives 100 hosts for Class B

182

Class A


183

Class A10.0.0.0 /10Subnets 22 -2 = 2Hosts 222 -2 = 4194302Block Size 256-192 = 64

Subnets 10.0 10.64 10.128 10.192

FHID 10.0.0.1 10.64.0.1 10.128.0.1 10.192.0.1

LHID 10.63.255.254

10.127.255.254

10.191.255.254

10.254.255.254

Broadcast 10.63.255.255

10.127.255.255

10.191.255.255

10.254.255.255

184

Class A


185

Class A10.0.0.0 /18Subnets 210 -2 = 1022Hosts 214 -2 = 16382Block Size 256-192 = 64

Subnets 10.0.0.0 10.0.64.0 10.0.128.0 10.0.192.0

FHID 10.0.0.1 10.0.64.1 10.0.128.1 10.0.192.1

LHID 10.0.63.254 10.0.127.254 10.0.191.254 10.0.254.254

Broadcast 10.0.63.255 10.0.127.255 10.0.191.255 10.0.254.255

186

Broadcast Addresses Exercise

Broadcast Addresses Exercise

Address Class Subnet Broadcast

201.222.10.60 255.255.255.248

Subnet Mask

15.16.193.6 255.255.248.0

128.16.32.13 255.255.255.252

153.50.6.27 255.255.255.128

187

Broadcast Addresses Exercise Answers

Broadcast Addresses Exercise Answers

153.50.6.127

Address Class Subnet Broadcast

201.222.10.60 255.255.255.248 C 201.222.10.63201.222.10.56

Subnet Mask

15.16.193.6 255.255.248.0 A 15.16.199.25515.16.192.0

128.16.32.13 255.255.255.252 B 128.16.32.15128.16.32.12

153.50.6.27 255.255.255.128 B 153.50.6.0

188

VLSM

• VLSM is a method of designating a different subnet mask for the same network number on different subnets

• Can use a long mask on networks with few hosts and a shorter mask on subnets with many hosts

• With VLSMs we can have different subnet masks for different subnets.

189

Variable Length Subnetting

VLSM allows us to use one class C address to design a networking scheme to meet the following requirements:Bangalore 60 HostsMumbai 28 HostsSydney 12 HostsSingapore 12 HostsWAN 1 2 HostsWAN 2 2 HostsWAN 3 2 Hosts

190

Networking Requirements

Bangalore 60

Mumbai 60 Sydney 60 Singapore 60

WAN 1 WAN 2

WAN 3

In the example above, a /26 was used to provide the 60 addresses for Bangalore and the other LANs. There are no addresses left for WAN links

191

Networking Scheme

Mumbai 192.168.10.64/27

Bangalore 192.168.10.0/26

Sydney 192.168.10.96/28

Singapore 192.168.10.112/28

WAN 192.168.10.129 and 130 WAN 192.198.10.133 and 134

WAN 192.198.10.137 and 138

60 12 12

28

22

2192.168.10.128/30

192.168.10.136/30

192.168.10.132/30

192

VLSM Exercise

2

2

2

40

25

12

192.168.1.0

193

VLSM Exercise

2 2

2

40

25

12

192.168.1.0

192.168.1.4/30

192.168.1.8/30

192.168.1.12/30

192.168.1.16/28

192.168.1.32/27

192.168.1.64/26

194

VLSM Exercise

2

2

8

15

5

192.168.1.0

2

235

195

Summarization

• Summarization, also called route aggregation, allows routing protocols to advertise many networks as one address.

• The purpose of this is to reduce the size of routing tables on routers to save memory

• Route summarization (also called route aggregation or supernetting) can reduce the number of routes that a router must maintain

• Route summarization is possible only when a proper addressing plan is in place

• Route summarization is most effective within a subnetted environment when the network addresses are in contiguous blocks

196

Summarization

197

Supernetting

Network Subnet

172.16.12.0 11000000

11111111

10101000

11111111

00001100

11111111255.255.255.0

NetworkNetwork

00000000

00000000

16 8 4 2 1

172.16.13.0 11000000 1010100000001101 00000000172.16.14.0 11000000 1010100000001110 00000000

172.16.15.0 11000000 1010100000001111 00000000

198

Supernetting

Network Subnet

172.16.12.0 11000000

11111111

10101000

11111111

00001100

11111100255.255.252.0

NetworkNetwork

00000000

00000000

16 8 4 2 1

172.16.13.0 11000000 1010100000001101 00000000172.16.14.0 11000000 1010100000001110 00000000

172.16.15.0 11000000 1010100000001111 00000000

172.16.12.0/24172.16.13.0/24172.16.14.0/24172.16.15.0/24

172.16.12.0/22

199

Supernetting Question

172.1.7.0/24

172.1.6.0/24

172.1.5.0/24

172.1.4.128/25

172.1.4.128/25

What is the most efficient summarization that TK1 can use to advertise its networks to TK2?

A. 172.1.4.0/24172.1.5.0/24172.1.6.0/24172.1.7.0/24B. 172.1.0.0/22C. 172.1.4.0/25172.1.4.128/25172.1.5.0/24172.1.6.0/24172.1.7.0/24D. 172.1.0.0/21E. 172.1.4.0/22

Date post:	17-Dec-2014
Category:	Education
Upload:	danishrafiq
View:	360 times
Download:	1 times

Ccna day1

Education