+ All Categories
Home > Documents > ccna referenbce books for beginner

ccna referenbce books for beginner

Date post: 04-Apr-2018
Category:
Upload: nyi-nyi
View: 228 times
Download: 1 times
Share this document with a friend

of 40

Transcript
  • 7/30/2019 ccna referenbce books for beginner

    1/40

    Sun 310-011

    Sun 310-011 SUN CERTIFIED SYSTEM

    ADMINISTRATOR FOR SOLARIS 8 PART 1

    Practice TestVersion 1.0

  • 7/30/2019 ccna referenbce books for beginner

    2/40

    ActualTe

    sts.com

    QUESTION NO: 1 CORRECT TEXT

    You see a system administrator use the shutdown command on a system running Solaris 8, but do

    not see any other details. Later you see that, without any further intervention, the system is waiting

    at the ok prompt.

    Which Run Level did the administrator use? Answer:

    Answer: 0

    QUESTION NO: 2

    Which two commands should be used to acquire online information about the /etc/vfstab file?

    (Choose two.)

    A. man vfstab

    B. man -s4 vfstab

    C. man vfstab(5)

    D. man /etc/vfstab

    Answer: A,B

    QUESTION NO: 3

    When using the command line to add, modify, or delete user accounts, or to add modify or delete

    groups, it is possible to use the -o option to allow duplicate users or group IDs. Which four

    commands support the use of the -o syntax? (Choose four.)

    A. groupmod

    B. useradd

    C. userdelD. adduser

    E. usermod

    F. groupdel

    G. groupadd

    Answer: A,B,E,G

    QUESTION NO: 4 CORRECT TEXT

    During system initialization, which file causes the init process to call the /sbin/rc2 script? Answer:

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 2

  • 7/30/2019 ccna referenbce books for beginner

    3/40

    ActualTe

    sts.com

    Answer: /ETC/INITTAB,INITTAB

    QUESTION NO: 5

    You are using a system running in single user mode and want to turn it off. Which three

    commands are acceptable to run prior to turning off the power switch, or, to remove power from

    the system? (Choose three.)

    A. poweroff

    B. init 3

    C. reboot -- -r

    D. reboot

    E. halt

    F. init 5

    Answer: A,E,F

    QUESTION NO: 6

    What is the purpose of the file command?

    A. The file command attempts to classify the file type based on the file's content.

    B. The file command is used to transfer files between file systems.

    C. The file command is used to search binary data streams for references to readable ASCII files.

    D. The file command reports on file size, file ownership, and access permissions.

    Answer: A

    QUESTION NO: 7 CORRECT TEXT

    What is the name of the directory where the kernel device information file path_to_inst is found?

    Answer:

    Answer: /ETC

    QUESTION NO: 8

    Click the Exhibit button.

    The steps that should be used to interactively restore the /etc/inet/hosts file from the second

    ufsdump file on a tape are shown in the exhibit. In which order should they be executed?

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 3

  • 7/30/2019 ccna referenbce books for beginner

    4/40

    ActualTe

    sts.com

    A. 3, 6, 5, 2, 1, 4, 7

    B. 3, 4, 5, 6, 2, 1, 7

    C. 3, 5, 6, 4, 2, 1, 7

    D. 3, 6, 4, 2, 1, 5, 7

    Answer: C

    QUESTION NO: 9 CORRECT TEXT

    Which command, similar to tar in syntax, produces an archive which compresses each file before

    archiving it? Answer:

    Answer: JAR

    QUESTION NO: 10

    What is the name of the default signal that is sent to the dtmail process using the command pkill

    dtmail?

    A. INT

    B. EXITC. HUP

    D. TERM

    E. KILL

    Answer: D

    QUESTION NO: 11

    What is the name of the default signal that is sent to the dtmail process using the command pkill

    dtmail?

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 4

  • 7/30/2019 ccna referenbce books for beginner

    5/40

    ActualTe

    sts.com

    A. HUP

    B. TERM

    C. KILL

    D. EXIT

    E. INT

    Answer: B

    QUESTION NO: 12

    Which vi character sequence replaces all occurrences of the string Solaris with the string Solaris

    Operating Environment in the current file?

    A. :%s/Solaris/Solaris Operating Environment/g

    B. :s/Solaris Operating Environment/Solaris/

    C. :r/Solaris/Solaris Operating Environment/g

    D. :%s/Solaris/Solaris Operating Environment/

    Answer: A

    QUESTION NO: 13

    Which command should be used to configure only those devices supported by the st driver?

    A. sysconfig -i st

    B. devfsadm -i st

    C. drvconfig -d st

    D. tapes -d st

    Answer: B

    QUESTION NO: 14

    What is the result of mounting a file system with the noatime option enabled?

    A. It prevents the creation of files larger than 2 GB.

    B. It enables ufs logging.

    C. It prevents the user from updating the file modification times.

    D. It disables the update of file access times.

    Answer: D

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 5

  • 7/30/2019 ccna referenbce books for beginner

    6/40

    ActualTe

    sts.com

    QUESTION NO: 15

    Which file system type must be passed to the mount command to mount a DOS formatted floppy

    disk?

    A. ufs

    B. fatfs

    C. dosfs

    D. fdfs

    E. pcfs

    Answer: E

    QUESTION NO: 16 CORRECT TEXT

    Within the partition menu of the format command, which single command should you type next in

    order to give a name to the current label definition for future retrieval? Answer:

    Answer: NAME

    QUESTION NO: 17

    Which command can be run, or file can be checked, to determine if a file system has been

    mounted with the UFS logging option?

    A. /etc/mount.conf

    B. /usr/bin/df

    C. /usr/bin/logger

    D. /usr/sbin/mountE. /etc/dfs/dfstab

    Answer: D

    QUESTION NO: 18

    Which command should be used to uninstall patch 106793-01?

    A. patchinfo -d 106793-01

    B. patchadd -d 106793-01

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 6

  • 7/30/2019 ccna referenbce books for beginner

    7/40

    ActualTe

    sts.com

    C. patchdel 106793-01

    D. patchrm 106793-01

    Answer: D

    QUESTION NO: 19

    What is the result of using the following command?

    # mkdir -p dir1/dir2/dir3

    A. It creates three directories, named dir1, dir1/dir2, and dir1/dir2/dir3 respectively.

    B. It creates three directories, named dir1, dir2, and dir3, using the current working directory as the

    parent directory.

    C. It attempts to create dir1/dir2/dir3, but posts appropriate error messages if the parent directories

    of dir1 or dir1/dir2 do not exist.

    D. It creates three directories, named dir1, dir2, and dir3, and overrides the permission

    modifications created by the file mode creation mask.

    Answer: A

    QUESTION NO: 20

    Which command is used to build a new file system on the raw special device at c0t3d0s5?

    A. newfs /dev/rdsk/c0t3d0s5

    B. newfs /dev/dsk/c0t3d0s5

    C. newfs c0t3d0s5,raw

    D. newfs -r c0t3d0s5

    Answer: A

    QUESTION NO: 21

    A user logs into a system running the Solaris 8 Operating Environment using the telnet command.

    The user has been assigned a Bourne shell (sh)and home /home/user1 directory. All of the

    following files exist with appropriate ownership and permissions.

    Which two files are used to initialize this user's session? (Choose two.)

    A. /home/user1/.logout

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 7

  • 7/30/2019 ccna referenbce books for beginner

    8/40

    ActualTe

    sts.com

    B. /home/user1/.cshrc

    C. /etc/profile

    D. /home/user1/.login

    E. /home/user1/.profile

    F. /etc/.login

    G. /etc/login

    H. /home/user1/.kshrc

    Answer: C,E

    QUESTION NO: 22

    Which two commands invoke data compression? (Choose two.)

    A. uncompress

    B. zcat

    C. jar -c

    D. gzcat

    E. compress

    F. jar -x

    G. tar

    Answer: C,E

    QUESTION NO: 23

    Which two commands or utilities can be used to display a list of active processes that will be

    updated at a user defined sample interval? (Choose two.)

    A. prtdiag

    B. prstatC. psrinfo

    D. sdtfpls

    E. sdtprocess

    F. prtconf

    Answer: B,E

    QUESTION NO: 24

    The following sets a permanent customized device alias at the open boot prompt:

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 8

  • 7/30/2019 ccna referenbce books for beginner

    9/40

    ActualTe

    sts.com

    ok ***** bootdisk2 /pci@1f,0/pci@1,1/ide@3/disk@2,0

    Which is the missing command?

    A. nvalias

    B. alias

    C. devalias

    D. setalias

    E. prtalias

    Answer: A

    QUESTION NO: 25

    What is the purpose of the /etc/mnttab file?

    A. It lists the devices under the control of the volume manager.

    B. It maintains a list of currently mounted file systems.

    C. It configures file sharing.

    D. It determines which file systems are mounted during the boot process.

    Answer: B

    QUESTION NO: 26

    Your system has just been brought to the boot prompt through an interrupt. Which command

    should you now use to minimize the amount of disruption caused to the disk-file system?

    A. sync

    B. fsck

    C. haltD. check

    E. umount

    F. probe-scsi

    Answer: A

    QUESTION NO: 27 CORRECT TEXT

    Which option of the usermod command allows the use of duplicate user IDs? Answer:

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 9

  • 7/30/2019 ccna referenbce books for beginner

    10/40

    ActualTe

    sts.com

    Answer: -O,O

    QUESTION NO: 28

    Your umask value is set to 022 and you create a file. Which set of permissions are associated with

    this file?

    A. ----w--w-

    B. rwxrwxrwx

    C. rwxr--r--

    D. rw-rw-rw-

    E. rw-r--r--

    Answer: E

    QUESTION NO: 29

    Which command should be used to extract the file install.log from the backup.tar file which is in tar

    format?

    A. tar -ivt -I backup.tar install.log

    B. tar xvf install.log backup.tar

    C. tar xvf backup.tar install.log

    D. tar cvf backup.tar install.log

    E. zcat backup.tar | tar xvf install.log

    Answer: C

    QUESTION NO: 30

    Which three characters can be entered from command mode in vi to change to last line mode?

    (Choose three.)

    A. +

    B. /

    C. :

    D. ;

    E. %

    F. ^

    G. $

    H. ?

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 10

  • 7/30/2019 ccna referenbce books for beginner

    11/40

    ActualTe

    sts.com

    Answer: B,C,H

    QUESTION NO: 31 CORRECT TEXT

    You are working from a text-based terminal. Which command should you use to change a user's

    primary group? Answer:

    Answer: USERMOD

    QUESTION NO: 32

    Which two commands display a list of active processes on the system? (Choose two.)

    A. prtconf

    B. psrinfo

    C. ps

    D. prstat

    E. pkill

    Answer: C,D

    QUESTION NO: 33 CORRECT TEXT

    Which single character in a Regular Expression denotes "zero or more occurrences of the

    previous character"? Answer:

    Answer: *

    QUESTION NO: 34

    Which file needs to be edited so that during system boot the /export/home file system is

    automatically mounted with the ufs logging option enabled?

    A. /etc/dfs/dfstab

    B. /etc/default/fs

    C. /etc/mnttab

    D. /usr/sbin/fstyp

    E. /etc/vfstab

    Answer: E

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 11

  • 7/30/2019 ccna referenbce books for beginner

    12/40

    ActualTe

    sts.com

    QUESTION NO: 35

    For which task is the kernel responsible?

    A. interrupting user keyboard entriesB. interpreting commands from scripts

    C. managing CPU resources

    D. translating user requests

    Answer: C

    QUESTION NO: 36 CORRECT TEXT

    The Solaris 8 Operating Environment allows users to change their passwords. By default, by how

    many characters must a new password differ from an old password for the change to be admitted?

    Answer:

    Answer: 3

    QUESTION NO: 37

    With the cursor in the center of a line, which vi command is used to insert a line above the current

    line?

    A. a

    B. i

    C. A

    D. o

    E. ?F. O

    Answer: F

    QUESTION NO: 38

    A user logs into a system running the Solaris 8 Operating Environment using the telnet command.

    The user has been assigned a Korn shell (ksh)and home /home/user1 directory. The following filesare executed on login by user1:

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 12

  • 7/30/2019 ccna referenbce books for beginner

    13/40

    ActualTe

    sts.com

    A. ) /home/user1/.kshrc

    B. ) /etc/profile

    C. ) /home/user1/.profile

    In which order are they executed?

    D. C, A, B

    E. A, C, B

    F. A, B, C

    G. C, B, A

    H. B, C, A

    I. B, A, C

    Answer: E

    QUESTION NO: 39

    Your current working directory contains:

    ./ ../ .tst dir1/ file1 file2 file3 file4

    Which command copies the .tst file into the dir1 directory?

    A. cp .tst dir1/

    B. cp *.* dir1

    C. cp * dir1

    D. cp .* dir1

    Answer: A

    QUESTION NO: 40

    Given:

    ls -ld telephone

    drwxrwsrwx 2 lesley sp 512 Aug 3 17:28 telephone

    Which command clears the SGID-bit causing this behavior?

    A. chmod 0767 telephone

    B. chmod 767 telephone

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 13

  • 7/30/2019 ccna referenbce books for beginner

    14/40

    ActualTe

    sts.com

    C. chmod 0777 telephone

    D. chmod g-l telephone

    E. chmod g-s telephone

    Answer: E

    QUESTION NO: 41

    Which ftp subcommand, if entered prior to transferring multiple files with the mget or mput

    subcommands, alleviates the need to answer interactive confirmations for each file?

    A. prompt

    B. noask

    C. stream

    D. mset

    Answer: A

    QUESTION NO: 42

    Which file maintains a list of currently mounted file systems?

    A. /etc/inittab

    B. /etc/mnttab

    C. /etc/vfstab

    D. /etc/dfs/sharetab

    E. /etc/rmtab

    Answer: B

    QUESTION NO: 43

    Click the Exhibit button.

    Which command should be used to terminate the smbd process that is not responding to any

    signal?

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 14

  • 7/30/2019 ccna referenbce books for beginner

    15/40

    ActualTe

    sts.com

    A. kill -9 8513

    B. kill -9 10859

    C. kill -8513

    D. kill smbd

    E. kill -10859

    Answer: B

    QUESTION NO: 44 CORRECT TEXT

    Which Run Level results in an orderly shutdown and power off of a system? Answer:

    Answer: 5

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 15

  • 7/30/2019 ccna referenbce books for beginner

    16/40

    ActualTe

    sts.com

    QUESTION NO: 45

    When logging into a system running the Solaris 8 Operating Environment, each user should be

    authenticated through the use of a password. A standard user plans to change the existing

    password to Mississippi3.

    Which statement is true?

    A. The system should allow the password, but give a warning.

    B. The password Mississippi3 is allowed.

    C. The system should not allow the password and should give an error message indicating the

    password is too short.

    D. The system should not allow the password and should give an error message indicating the

    password should not contain capital letters.

    E. The system should not allow the password and should give an error message indicating the

    password is too long.

    F. The system should not allow the password and should give an error message indicating the

    password lacks a numeric or special character.

    Answer: F

    QUESTION NO: 46

    Which three configuration parameters are set up during the Solaris 8 Operating Environment

    custom installation procedure? (Choose three.)

    A. user disk usage quotas

    B. file system layout

    C. 64-bit support

    D. software cluster configuration

    E. system printer selection

    Answer: B,C,D

    QUESTION NO: 47

    A user logs into a system running the Solaris 8 Operating Environment using the telnet command.

    The user has been assigned a C shell (csh)and home /home/user1 directory.

    All of the following files exist with appropriate ownership and permissions. Which three files are

    used to initialize this user's session? (Choose three.)

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 16

  • 7/30/2019 ccna referenbce books for beginner

    17/40

    ActualTe

    sts.com

    A. /home/user1/.cshrc

    B. /etc/login

    C. /etc/.login

    D. /home/user1/.login

    E. /etc/profile

    F. /home/user1/.profile

    G. /home/user1/.kshrc

    Answer: A,C,D

    QUESTION NO: 48

    Which command string displays the file and directory names that begin with the characters a, b, or

    c, and that end with the number 1?

    A. ls -d abc*1

    B. ls -ld [abc]*1

    C. ls {a,b,c}/*

    D. ls [a-c*1]

    Answer: B

    QUESTION NO: 49

    Which two characters, while in command mode, move the vi cursor up or down one line within the

    file? (Choose two.)

    A. j

    B. l

    C. h

    D. mE. k

    F. i

    Answer: A,E

    QUESTION NO: 50

    A user logs into a system running the Solaris 8 Operating Environment using the telnet command.

    The user has been assigned a Korn shell (ksh)and home /home/user1 directory.

    All of the following files exist with appropriate ownership and permissions. Which two files are

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 17

  • 7/30/2019 ccna referenbce books for beginner

    18/40

    ActualTe

    sts.com

    always used by the Korn shell to initialize this user's session? (Choose two.)

    A. /home/user1/.login

    B. /home/user1/.logout

    C. /home/user1/.cshrc

    D. /etc/login

    E. /etc/.login

    F. /home/user1/.profile

    G. /etc/profile

    Answer: F,G

    QUESTION NO: 51

    The following is a listing of an /etc/rc3.d directory:

    README S15nfs.server S50apache S76snmpdx S77dmi

    What is the significance of the two-digit number that follows the S and precedes the script name in

    each of the directory entries?

    A. The two digits define the number of dependencies on other scripts to suggest logical placement

    of scripts for sequential execution.B. The two digits define the sequence in which each script will be executed when changing to this

    Run Level.

    C. The two digits define the package sequence that defines the order in which each respective

    script was added to Solaris.

    D. The two digits signify how many links exist to each respective start script.

    Answer: B

    QUESTION NO: 52

    Your umask value is set to 000 and you create a file. Which set of permissions are associated with

    this file?

    A. rw-rw-rw-

    B. rwxrwxrwx

    C. ---------

    D. rwxrw-rw-

    E. r--r--r--

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 18

  • 7/30/2019 ccna referenbce books for beginner

    19/40

    ActualTe

    sts.com

    Answer: A

    QUESTION NO: 53

    Click the Exhibit button.

    The exhibit shows some of the commands available within a section of the format utility. Which

    single command should you type next in order to completely reorganize the disk label and be

    prompted for the size of each slice?

    A. name

    B. print

    C. modify

    D. select

    Answer: C

    QUESTION NO: 54

    Which command does a full backup of all files in the /export/home file system to the /dev/rmt/1

    remote tape device attached to the workstation mars?

    A. ufsdump 0f rd=mars:/dev/rmt/1 /export/home

    B. ufsdump 0f mars:/dev/rmt/1 /export/homeC. ufsdump 0f /dev/rmt/1 mars:/export/home

    D. ufsdump 0f /dev/rmt/1 /export/home

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 19

  • 7/30/2019 ccna referenbce books for beginner

    20/40

    ActualTe

    sts.com

    E. ufsdump 0mf mars /dev/rmt/1 /export/home

    Answer: B

    QUESTION NO: 55

    Which file is used to enable or disable the mechanism by which a system may be interrupted and

    brought to the boot prompt?

    A. /etc/kybrd

    B. /etc/kbd

    C. /etc/default/kbd

    D. /etc/default/abort

    E. /etc/keyboard

    F. /etc/default/keyboard

    G. /etc/default/kbrd

    Answer: C

    QUESTION NO: 56

    Which file is used to enable or disable the mechanism by which a system may be interrupted and

    brought to the boot prompt?

    A. /etc/default/keyboard

    B. /etc/kybrd

    C. /etc/kbd

    D. /etc/default/kbrd

    E. /etc/default/kbd

    F. /etc/keyboard

    G. /etc/default/abort

    Answer: E

    QUESTION NO: 57

    You are using a system running at Run Level 3. All other users have logged out. The system runs

    a database application whose orderly shutdown is affected through Run Control scripts. Which two

    commands are acceptable to run before you shut the system down and turn the system off?

    (Choose two.)

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 20

  • 7/30/2019 ccna referenbce books for beginner

    21/40

    ActualTe

    sts.com

    A. poweroff

    B. shutdown -g0 -i -y

    C. reboot

    D. halt

    E. init 0

    Answer: B,E

    QUESTION NO: 58 CORRECT TEXT

    In which file is the default Run Level defined? Answer:

    Answer: /ETC/INITTAB

    QUESTION NO: 59

    You are in a directory containing only text files. You want to use grep to search all these files for

    lines which contain "A" at the start of a line.

    Which command should you use?

    A. grep * '^A'

    B. grep '$A' *

    C. grep * '$A'

    D. grep '^A' *

    E. grep A*

    Answer: D

    QUESTION NO: 60

    Which command is used to mount an ISO 9660 format CD-ROM onto the mount point /mnt if the

    volume manager daemon is not running?

    A. mount -r /dev/dsk/c0t6d0s0 /mnt

    B. mount -F hsfs -o ro /mnt /vol/dev/aliases/cdrom0

    C. mount -F iso -r /dev/dsk/c0t6d0s0 /mnt

    D. mount -F hsfs -o ro /dev/dsk/c0t6d0s0 /mnt

    E. mount cdrom /mnt

    Answer: D

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 21

  • 7/30/2019 ccna referenbce books for beginner

    22/40

    ActualTe

    sts.com

    QUESTION NO: 61

    What is the correct syntax used to copy a local file to a remote host?

    A. rcp filename remotehost/directoryB. rcp filename remotehost:/directory

    C. rcp filename remotehost /directory

    D. rcp filename remotehost

    Answer: B

    QUESTION NO: 62

    Your current working directory is the /export/home/user1 directory. Using relative pathname

    syntax, which command string moves you into the /export/home/user2 directory?

    A. mv /user2

    B. cd ../../user2

    C. cd ../user2

    D. mv ../../user2

    Answer: C

    QUESTION NO: 63

    Which command lists the contents of your current directory and identifies each entry by type?

    A. file *

    B. dir *

    C. type *

    D. ls -T *

    Answer: A

    QUESTION NO: 64

    Which command displays an Access Control List for a file?

    A. lsacl

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 22

  • 7/30/2019 ccna referenbce books for beginner

    23/40

    ActualTe

    sts.com

    B. faclget

    C. aclget

    D. getfacl

    E. getacl

    Answer: D

    QUESTION NO: 65

    Which ufsdump command should be used to create and verify an incremental Level 5 backup of

    the /dev/rdsk/c0t1d0s4 partition to the default tape device?

    A. ufsdump 5xvf /dev/rmt/0 /dev/rdsk/c0t1d0s4

    B. ufsdump /dev/rdsk/c0t1d0s4 5v /dev/rmt/0

    C. ufsdump 5f /dev/rmt/0 /dev/rdsk/c0t1d0s4

    D. ufsdump 5vf /dev/rmt/0 /dev/rdsk/c0t1d0s4

    E. ufsdump 0f /dev/rmt/0 /dev/rdsk/c0t1d0s4

    Answer: D

    QUESTION NO: 66

    When installing a system that is attached to a network, which two are required for identification?

    (Choose two.)

    A. domain name

    B. client address

    C. host name

    D. IP address

    Answer: C,D

    QUESTION NO: 67

    Which vi command is used to copy three lines of text to memory and then paste these lines above

    the current line?

    A. 3yyp

    B. 3yyPC. copy:3pp

    D. :3c/p

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 23

  • 7/30/2019 ccna referenbce books for beginner

    24/40

    ActualTe

    sts.com

    E. 3cP

    Answer: B

    QUESTION NO: 68 CORRECT TEXT

    You are working from a text-based terminal. Which command should you use to change a user's

    primary group? Answer:

    Answer: USERMOD

    QUESTION NO: 69 CORRECT TEXT

    Within the partition menu of the format command, which single command should you type to use a

    predefined label that was previously saved? Answer:

    Answer: SELECT

    QUESTION NO: 70

    What is the effect on the system of using the boot command without any options?

    A. It always performs a boot from the default boot device.

    B. It always performs a boot from the CD-ROM.

    C. I always performs a boot from the first hard disk.

    D. It always performs a boot from the network.

    Answer: A

    QUESTION NO: 71

    Which statement about the Solaris support of shells is true?

    A. C programmers must use the C shell (csh).

    B. The default user shell is the Bourne shell (sh).

    C. The Korn shell (ksh) is the default shell for root.

    D. The Bourne shell is used whenever a parent process spawns a child process.

    Answer: B

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 24

  • 7/30/2019 ccna referenbce books for beginner

    25/40

    ActualTe

    sts.com

    QUESTION NO: 72

    Your current working directory is the /export/home_a/user1 directory. Which two command strings

    put you into the /export/home_b/user20 directory? (Choose two.)

    A. cd /export/home_b/user20B. cd ../home_b/user20

    C. cd ../user20

    D. cd ../../home_b/user20

    Answer: A,D

    QUESTION NO: 73

    Which command installs the SUNWaudio package from the /export/pkgs spool directory ?

    A. pkgadd -d /export/pkgs SUNWaudio

    B. pkgadd /export/pkgs SUNWaudio

    C. pkgadd -s spool /export/pkgs SUNWaudio

    D. pkgadd -s /export/pkgs SUNWaudio

    Answer: A

    QUESTION NO: 74

    Given that permfile has its permissions set as follows:

    chmod 2666 permfile

    Which three statements about the permfile permissions are true? (Choose three.)

    A. Mandatory locking is enabled.

    B. The associated group has read and write permissions

    C. The associated group has read, write, and execute permissions.

    D. The file is not executable by any user.

    E. The file has the SUID bit set.

    F. The sticky bit is set.

    Answer: A,B,D

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 25

  • 7/30/2019 ccna referenbce books for beginner

    26/40

    ActualTe

    sts.com

    QUESTION NO: 75

    You are aware of a scheduled power outage. Which three commands protect your computer

    equipment against the damaging effects of a power outage? (Choose three.)

    A. shutdown -i 1 -g 300 -y

    B. init 0C. shutdown -i 0 -g 300 -y

    D. init S

    E. shutdown -i 5 -g 300 -y

    F. init 6

    G. init 3

    Answer: B,C,E

    QUESTION NO: 76

    Given:

    ls -ld telephone

    drwxrwsrwx 2 lesley sp 512 Aug 3 17:28 telephone

    Which command clears the SGID-bit causing this behavior?

    A. chmod g-s telephone

    B. chmod 0777 telephone

    C. chmod 767 telephone

    D. chmod 0767 telephone

    E. chmod g-l telephone

    Answer: A

    QUESTION NO: 77

    Which command string displays the file and directory names that begin with the characters a, b, or

    c, and that end with the number 1?

    A. ls [a-c*1]

    B. ls -d abc*1C. ls {a,b,c}/*

    D. ls -ld [abc]*1

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 26

  • 7/30/2019 ccna referenbce books for beginner

    27/40

    ActualTe

    sts.com

    Answer: D

    QUESTION NO: 78

    Click the Exhibit button. Which command terminates the in.rarpd process?

    A. kill in.rarpd

    B. kill 1

    C. signal in.rarpd

    D. pkill 826

    E. pkill in.rarpd

    Answer: E

    QUESTION NO: 79

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 27

  • 7/30/2019 ccna referenbce books for beginner

    28/40

    ActualTe

    sts.com

    Which command should be used to extract the file install.log from the backup.tar file which is in tar

    format?

    A. zcat backup.tar | tar xvf install.log

    B. tar xvf install.log backup.tar

    C. tar -ivt -I backup.tar install.log

    D. tar xvf backup.tar install.log

    E. tar cvf backup.tar install.log

    Answer: D

    QUESTION NO: 80

    Which Solaris 8 command creates device special files in /devices and logical links in /dev?

    A. devlinks

    B. devfsadm

    C. ports

    D. disks

    Answer: B

    QUESTION NO: 81

    Which subcommand within the format utility, when executed from the initial command menu,

    allows you to select a new disk?

    A. new

    B. save

    C. menu

    D. diskE. partition

    Answer: D

    QUESTION NO: 82

    Which information is provided when executing the following command?

    # who -r

    A. A reboot is performed after signalling logged-in users.

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 28

  • 7/30/2019 ccna referenbce books for beginner

    29/40

    ActualTe

    sts.com

    B. A list of logged-in remote users is returned.

    C. The current Run Level is returned.

    D. A current list of root users is returned.

    Answer: C

    QUESTION NO: 83

    Which command changes Access Control List data for a file?

    A. faclset

    B. setfacl

    C. setacl

    D. chacl

    E. aclset

    Answer: B

    QUESTION NO: 84

    Which command is used to build a new file system on the raw special device at c0t3d0s5?

    A. newfs /dev/dsk/c0t3d0s5

    B. newfs /dev/rdsk/c0t3d0s5

    C. newfs c0t3d0s5,raw

    D. newfs -r c0t3d0s5

    Answer: B

    QUESTION NO: 85 DRAG DROP

    Click the Task button.

    Place each file on its description.

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 29

  • 7/30/2019 ccna referenbce books for beginner

    30/40

    ActualTe

    sts.com

    Answer:

    QUESTION NO: 86

    Which command should be used to extract the install.log file from the backup.jar file which is in jar

    format?

    A. zcat backup.jar | jar xvf install.log

    B. jar xvf install.log backup.jar

    C. jar xvf backup.jar install.log

    D. jar -ivt -I backup.jar install.log

    E. jar cvf backup.jar install.log

    Answer: C

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 30

  • 7/30/2019 ccna referenbce books for beginner

    31/40

    ActualTe

    sts.com

    QUESTION NO: 87

    Your current working directory contains:

    ./ ../ .tst dir1/ file1 file2 file3 file4

    Which command copies the .tst file into the dir1 directory?

    A. cp * dir1

    B. cp .* dir1

    C. cp .tst dir1/

    D. cp *.* dir1

    Answer: C

    QUESTION NO: 88

    Given that permfile has its permissions set as follows:

    chmod 2666 permfile

    Which three statements about the permfile permissions are true? (Choose three.)

    A. The file is not executable by any user.

    B. The associated group has read, write, and execute permissions.

    C. The sticky bit is set.

    D. Mandatory locking is enabled.

    E. The file has the SUID bit set.

    F. The associated group has read and write permissions

    Answer: A,D,F

    QUESTION NO: 89

    Your system has just been brought to the boot prompt through an interrupt. Which command

    should you now use to minimize the amount of disruption caused to the disk-file system?

    A. fsck

    B. halt

    C. probe-scsi

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 31

  • 7/30/2019 ccna referenbce books for beginner

    32/40

    ActualTe

    sts.com

    D. check

    E. sync

    F. umount

    Answer: E

    QUESTION NO: 90

    You want to run an NFS client environment, but not an NFS server environment. Which Run Level

    should you choose as the default?

    A. 1

    B. 2

    C. 5

    D. 0

    E. 3

    F. S

    G. 4

    Answer: B

    QUESTION NO: 91 CORRECT TEXT

    Which option of the usermod command allows the use of duplicate user IDs? Answer:

    Answer: -O,O

    QUESTION NO: 92

    Which command should be used to initiate an interactive restore from the device /dev/rmt/0 tape?

    A. ufsrestore ivf /dev/rmt/0

    B. ufsrestore tvf /dev/rmt/0

    C. ufsrestore 0f /dev/rmt/0

    D. ufsrestore rvf /dev/rmt/0

    E. ufsrestore /dev/rmt/0

    Answer: A

    QUESTION NO: 93

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 32

  • 7/30/2019 ccna referenbce books for beginner

    33/40

    ActualTe

    sts.com

    Which PROM command boots the system using a different system file?

    A. boot -s

    B. boot -f /etc/system.new

    C. boot /etc/system.new

    D. boot -a

    Answer: D

    QUESTION NO: 94

    What is the result of using the following command?

    # mkdir -p dir1/dir2/dir3

    A. It creates three directories, named dir1, dir2, and dir3, using the current working directory as the

    parent directory.

    B. It attempts to create dir1/dir2/dir3, but posts appropriate error messages if the parent directories

    of dir1 or dir1/dir2 do not exist.

    C. It creates three directories, named dir1, dir1/dir2, and dir1/dir2/dir3 respectively.

    D. It creates three directories, named dir1, dir2, and dir3, and overrides the permission

    modifications created by the file mode creation mask.

    Answer: C

    QUESTION NO: 95

    Which command indicates the Run Level of the init process?

    A. w

    B. init -rC. who -r

    D. rstat

    Answer: C

    QUESTION NO: 96

    Which statement best describes the types of files and directories located under the /exportdirectory on a Solaris 8 system?

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 33

  • 7/30/2019 ccna referenbce books for beginner

    34/40

    ActualTe

    sts.com

    A. system administration executables

    B. kernel device drivers

    C. system configuration files

    D. NFS configuration files

    E. user home directories

    Answer: E

    QUESTION NO: 97

    When using the command line to add, modify, or delete user accounts, or to add modify or delete

    groups, it is possible to use the -o option to allow duplicate users or group IDs. Which four

    commands support the use of the -o syntax? (Choose four.)

    A. groupdel

    B. groupadd

    C. userdel

    D. adduser

    E. groupmod

    F. useradd

    G. usermod

    Answer: B,E,F,G

    QUESTION NO: 98

    You are working with SCSI disks. Which command within the format utility, from the initial menu,

    should you type next if you want to display the vendor, product name, and revision of the disk?

    A. volname

    B. typeC. analyze

    D. inquiry

    E. defect

    F. current

    Answer: D

    QUESTION NO: 99

    What is the function of the hash subcommand of the FTP utility?

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 34

  • 7/30/2019 ccna referenbce books for beginner

    35/40

    ActualTe

    sts.com

    A. It performs encryption of every transferred file.

    B. It enables or disables the filename mapping mechanism.

    C. It sets or unsets the filename character translation mechanism.

    D. It toggles hash-sign printing for each data block transferred.

    Answer: D

    QUESTION NO: 100

    Which two statements describe the types of files located in the /usr directory on a Solaris 8

    system? (Choose two.)

    A. standard system library files

    B. user home directories

    C. NFS configuration files

    D. system configuration files

    E. common user executables

    Answer: A,E

    QUESTION NO: 101

    Which two commands list the installed patches on a system? (Choose two.)

    A. showrev -p

    B. pkginfo -p

    C. patchadd -p

    D. patchlist -p

    Answer: A,C

    QUESTION NO: 102

    From the OBP prompt, which command displays device aliases?

    A. nvalias

    B. alias

    C. prtalias

    D. devalias

    Answer: D

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 35

  • 7/30/2019 ccna referenbce books for beginner

    36/40

    ActualTe

    sts.com

    QUESTION NO: 103

    Which command mounts the device /dev/dsk/c1t0d0s0 on the mount point /mnt so that it prevents

    the creation of files larger than 2 GB?

    A. mount /dev/dsk/c1t0d0s0 -nolargefiles /mnt

    B. mount /dev/dsk/c1t0d0s0 /mnt

    C. mount nolargefiles /dev/dsk/c1t0d0s0 /mnt

    D. mount -o nolargefiles /dev/dsk/c1t0d0s0 /mnt

    Answer: D

    QUESTION NO: 104 DRAG DROP

    Click the Task button.

    Place each command on its associated file type.

    Answer:

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 36

  • 7/30/2019 ccna referenbce books for beginner

    37/40

    ActualTe

    sts.com

    QUESTION NO: 105

    You have set up a permanent customized device alias at the OBP. Which command allows you to

    remove the alias?

    A. unsetalias

    B. devunalias

    C. unalias

    D. unset

    E. nvunalias

    Answer: E

    QUESTION NO: 106

    The following is a listing of an /etc/rc3.d directory:

    README S15nfs.server S50apache S76snmpdx S77dmi

    What is the significance of the two-digit number that follows the S and precedes the script name in

    each of the directory entries?

    A. The two digits define the package sequence that defines the order in which each respective

    script was added to Solaris.

    B. The two digits define the sequence in which each script will be executed when changing to this

    Run Level.

    C. The two digits signify how many links exist to each respective start script.

    D. The two digits define the number of dependencies on other scripts to suggest logical placement

    of scripts for sequential execution.

    Answer: B

    QUESTION NO: 107

    From the OBP prompt, which command can be used to create a customized device alias which

    survives power cycling the machine?

    A. nvalias

    B. alias

    C. prtalias

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 37

  • 7/30/2019 ccna referenbce books for beginner

    38/40

    ActualTe

    sts.com

    D. devalias

    E. setalias

    Answer: A

    QUESTION NO: 108

    Which vi character sequence replaces all occurrences of the string Solaris with the string Solaris

    Operating Environment in the current file?

    A. :%s/Solaris/Solaris Operating Environment/g

    B. :s/Solaris Operating Environment/Solaris/

    C. :r/Solaris/Solaris Operating Environment/g

    D. :%s/Solaris/Solaris Operating Environment/

    Answer: A

    QUESTION NO: 109

    You have just installed the SUNWaudio package with the command:

    # /usr/sbin/pkgadd -d /cdrom/sol_8_sparc/s0/Solaris_8/Product SUNWaudio

    Which command tests the accuracy of the package installation?

    A. pkgadd -v SUNWaudio

    B. pkginfo -v SUNWaudio

    C. pkgchk -v SUNWaudio

    D. pkginst -v SUNWaudio

    Answer: C

    QUESTION NO: 110

    Each directory is a file system mount point. Which two file systems contain kernel modules?

    (Choose two.)

    A. /export

    B. /usrC. /tmp

    D. /var

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 38

  • 7/30/2019 ccna referenbce books for beginner

    39/40

    ActualTe

    sts.com

    E. /

    Answer: B,E

    QUESTION NO: 111

    Click the Exhibit button.

    The exhibit shows some of the commands available within a section of the format utility. Which

    single command should you type next in order to inspect the size of slices three and four?

    A. print

    B. modify

    C. select

    D. name

    Answer: A

    QUESTION NO: 112

    Which two commands should be used to acquire online information about the /etc/vfstab file?

    (Choose two.)

    A. man /etc/vfstab

    B. man -s4 vfstab

    C. man vfstab

    Sun 310-011: Practice Exam

    "Pass Any Exam. Any Time." - www.actualtests.com 39

  • 7/30/2019 ccna referenbce books for beginner

    40/40

    ActualTe

    sts.com

    D. man vfstab(5)

    Answer: B,C

    QUESTION NO: 113

    Which command enables you to list, but not retrieve, the contents of a tape archive copied to the

    default tape device /dev/rmt/0?

    A. tar xpf /dev/rmt/0

    B. tar cvf /dev/rmt/0

    C. tar xvf | /dev/rmt/0

    D. tar tf /dev/rmt/0

    E. tar lf /dev/rmt/0

    Answer: D

    QUESTION NO: 114

    You have login accounts on hostA and hostB. You want to execute the rcp command to copy a file

    from hostA to hostB.

    What do you need to do to become a trusted user on hostA?

    A. add your login name to the /etc/hosts.equiv file on hostB

    B. create a .rhosts file in your home directory on hostA and put the hostname hostB in the file

    C. ask the system administrator to add you to the /etc/.rhosts file on the host hostB

    D. create hosts.equiv files in your home directories and put a + in the file on hostB

    Answer: B

    Sun 310-011: Practice Exam


Recommended