of 17
8/8/2019 Ccnas Final
1/17
1
Which Cisco IOS configuration option instructs the IPS to compile a signature category named ios_ips
into memory
and use it to scan traffic?
R1(config)# ip ips signature-category
R1(config-ips-category)# category all
R1(config-ips-category-action)# retired false
R1(config)# ip ips signature-category
R1(config-ips-category)# category ios_ips basic
R1(config-ips-category-action)# retired false
R1(config)# ip ips signature-category
R1(config-ips-category)# category all
R1(config-ips-category-action)# enabled true
R1(config)# ip ips signature-category
R1(config-ips-category)# category ios_ips basic
R1(config-ips-category-action)# enabled true
2
Refer to the exhibit. An administrator has configured router R1 as indicated. However, SDEE messages
fail to log.
Which solution corrects this problem?
Issue the logging on command in global configuration.
Issue the ip ips notify sdee command in global configuration.
Issue the ip audit notify log command in global configuration.
Issue the clear ip ips sdee events command to clear the SDEE buffer.
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
2/17
3
Which three principles are enabled by a Cisco Self-Defending Network? (Choose three.)
adaptability
collaboration
insulation
integration
mitigation
scalability
4
What are two disadvantages of using network IPS? (Choose two.)
Network IPS has a difficult time reconstructing fragmented traffic to determine if an attack was
successful.
Network IPS is incapable of examining encrypted traffic.
Network IPS is operating system-dependent and must be customized for each platform.
Network IPS is unable to provide a clear indication of the extent to which the network is being
attacked.
Network IPS sensors are difficult to deploy when new networks are added.
5
Which access list statement permits HTTP traffic that is sourced from host 10.1.129.100 port 4300 and
destined to host
192.168.30.10?
access-list 101 permit tcp any eq 4300
access-list 101 permit tcp 192.168.30.10 0.0.0.0 eq 80 10.1.0.0 0.0.255.255
access-list 101 permit tcp 10.1.129.0 0.0.0.255 eq www 192.168.30.10 0.0.0.0 eq www
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
3/17
access-list 101 permit tcp 10.1.128.0 0.0.1.255 eq 4300 192.168.30.0 0.0.0.15 eq www
access-list 101 permit tcp host 192.168.30.10 eq 80 10.1.0.0 0.0.255.255 eq 4300
6
Which type of SDM rule is created to govern the traffic that can enter and leave the network based on
protocol and
port number?
NAC rule
NAT rule
IPsec rule
access rule
7
Refer to the exhibit. When configuring SSH on a router using SDM from the Configure menu, which two
steps are
required? (Choose two.)
Choose Additional Tasks > Router Access > SSH to generate the RSA keys.
Choose Additional Tasks > Router Access > VTY to specify SSH as the input and output
protocol.
Choose Additional Tasks > Router Properties > Netflow to generate the RSA keys.
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
4/17
Choose Additional Tasks > Router Properties > Logging to specify SSH as the input and output
protocol.
Choose Additional Tasks > Router Access > AAA to generate the RSA keys.
Choose Additional Tasks > Router Access > Management Access to specify SSH as the input
and output protocol.
8
Refer to the exhibit. Which two statements are correct regarding the configuration on switch S1?
(Choose two.)
Port Fa0/5 storm control for broadcasts will be activated if traffic exceeds 80.1 percent of the total
bandwidth.
Port Fa0/6 storm control for multicasts and broadcasts will be activated if traffic exceeds 2,000,000
packets per
second.
Port Fa0/6 storm control for multicasts will be activated if traffic exceeds 2,000,000 packets per
second.
Port Fa0/5 storm control for multicasts will be activated if traffic exceeds 80.1 percent of the total
bandwidth.
Port Fa0/5 storm control for broadcasts and multicasts will be activated if traffic exceeds 80.1
percent of 2,000,000
packets per second.
9
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
5/17
Refer to the exhibit. Which three things occur if a user attempts to log in four times within 10 seconds
using an incorrect
password? (Choose three.)
Subsequent virtual login attempts from the user are blocked for 60 seconds.
During the quiet mode, an administrator can virtually log in from any host on network
172.16.1.0/24.
Subsequent console login attempts are blocked for 60 seconds.
A message is generated indicating the username and source IP address of the user.
During the quiet mode, an administrator can log in from host 172.16.1.2.
No user can log in virtually from any host for 60 seconds.
10
Which type of Layer 2 attack makes a host appear as the root bridge for a LAN?
LAN storm
MAC address spoofing
MAC address table overflow
STP manipulation
VLAN attack
11
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
6/17
What occurs after RSA keys are generated on a Cisco router to prepare for secure device
management?
All vty ports are automatically configured for SSH to provide secure management.
The general-purpose key size must be specified for authentication with the crypto key generate
rsa general-keys modulus command.
The keys must be zeroized to reset secure shell before configuring other parameters.
The generated keys can be used by SSH.
12
An organization has mobile workers who use corporate-owned laptops at customer sites to view
inventory and place orders.
Which type of VPN allows these workers to securely access all of the client/server applications of the
organization?
clientless SSL VPN
remote-access IPsec VPN
site-to-site IPsec VPN
HTTPS-enabled SSL VPN
13
Which two guidelines relate to in-band network management? (Choose two.)
Apply in-band management only to devices that must be managed on the production network.
Implement separate network segments for the production network and the management network.
Attach all network devices to the same management network.
Use IPSec, SSH, or SSL.
Deploy a terminal server with console connections to each network device.
14
Which three commands are required to configure SSH on a Cisco router? (Choose three.)
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
7/17
ip domain-namename in global configuration mode
transport input ssh on a vty line
no ip domain-lookup in global configuration mode
passwordpasswordon a vty line
service password-encryption in global configuration mode
crypto key generate rsa in global configuration mode
15
An administrator needs to create a user account with custom access to most privileged EXEC
commands.
Which privilege command is used to create this custom account?
privilege exec level 0
privilege exec level 1
privilege exec level 2
privilege exec level 15
16
Refer to the exhibit. An administrator has configured a standard ACL on R1 and applied it to interface
serial 0/0/0 in
the outbound direction. What happens to traffic leaving interface serial 0/0/0 that does not match the
configured ACL
statements?
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
8/17
The resulting action is determined by the destination IP address.
The resulting action is determined by the destination IP address and port number.
The source IP address is checked and, if a match is not found, traffic is routed out interface serial
0/0/1.
The traffic is dropped.
17
Which statement describes configuring ACLs to control Telnet traffic destined to the router itself?
The ACL must be applied to each vty line individually.
The ACL is applied to the Telnet port with the ip access-group command.
Apply the ACL to the vty lines without the in orout option required when applying ACLs to
interfaces.
The ACL should be applied to all vty lines in the in direction to prevent an unwanted user from
connecting to an
unsecured port.
18 Which three statements describe SSL-based VPNs? (Choose three.)Asymmetric algorithms are used for authentication and key exchange.
It is impossible to configure SSL and IPsec VPNs concurrently on the same router.
Special-purpose client software is required on the client machine.
Symmetric algorithms are used for bulk encryption.
The authentication process uses hashing technologies.
The application programming interface is used to extensively modify the SSL client software.
The primary restriction of SSL VPNs is that they are currently supported only in hardware.
19
Refer to the exhibit. What information can be obtained from the AAA configuration statements?
The authentication method list used for Telnet is named ACCESS.
The authentication method list used by the console port is named ACCESS.
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
9/17
8/8/2019 Ccnas Final
10/17
Refer to the exhibit. Based on the SDM screen shown, which two actions will the signature take if an attack is detected
(Choose two.)
Reset the TCP connection to terminate the TCP flow.
Drop the packet and all future packets from this TCP flow.Generate an alarm message that can be sent to a syslog server.
Drop the packet and permit remaining packets from this TCP flow.
Create an ACL that denies traffic from the attacker IP address.
24 Which three switch security commands are required to enable port security on a port so that it will dynamically learn
a single MAC address and disable the port if a host with any other MAC address is connected? (Choose three.)
switchport mode access
switchport mode trunk
switchport port-security
switchport port-security maximum 2
switchport port-security mac-address sticky
switchport port-security mac-addressmac-address
25 Which statement describes the SDM Security Audit wizard?After the wizard identifies the vulnerabilities, the SDM One-Step Lockdown feature must be used to make all
security-related configuration changes.
After the wizard identifies the vulnerabilities, it automatically makes all security-related configuration changes.
The wizard autosenses the inside trusted and outside untrusted interfaces to determine possible security problem
that might exist.
The wizard is based on the Cisco IOS AutoSecure feature.
The wizard is enabled using the Intrusion Prevention task.
26 Which component of AAA is used to determine which resources a user can access and which operations the user is
allowed to perform?
auditing
accounting
authorization
authentication
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
11/17
27 Which two protocols allow SDM to gather IPS alerts from a Cisco ISR router? (Choose two.)FTP
HTTPS
SDEE
SSH
Syslog
TFTP
28
Refer to the exhibit. Which AAA command logs the activity of a PPP session?
aaa accounting connection start-stop group radius
aaa accounting connection start-stop group tacacs+
aaa accounting exec start-stop group radiusaaa accounting exec start-stop group tacacs+
aaa accounting network start-stop group radius
aaa accounting network start-stop group tacacs+
29 What is a feature of the TACACS+ protocol?It combines authentication and authorization as one process.
It encrypts the entire body of the packet for more secure communications.
It utilizes UDP to provide more efficient packet transfer.
It hides passwords during transmission using PAP and sends the rest of the packet in plaintext.
30
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
12/17
Refer to the exhibit. Which interface configuration completes the CBAC configuration on router R1?
R1(config)# interface fa0/0R1(config-if)# ip inspect INSIDE in
R1(config-if)# ip access-group OUTBOUND inR1(config)# interface fa0/1R1(config-if)# ip inspect INSIDE inR1(config-if)# ip access-group OUTBOUND inR1(config)# interface fa0/1R1(config-if)# ip inspect OUTBOUND inR1(config-if)# ip access-group INSIDE outR1(config)# interface fa0/0R1(config-if)# ip inspect OUTBOUND inR1(config-if)# ip access-group INSIDE inR1(config)# interface fa0/1R1(config-if)# ip inspect OUTBOUND inR1(config-if)# ip access-group INSIDE in
31
Refer to the exhibit. Which Cisco IOS security feature is implemented on router R2?
CBAC firewall
reflexive ACL firewall
zone-based policy firewall
AAA access control firewall
32 Which Cisco IOS privileged EXEC command can be used to verify that the Cisco IOS image and configuration files
have been properly backed up and secured?
Router# dir
Router# show archive
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
13/17
Router# show secure bootset
Router# show flash
33 Which device supports the use of SPAN to enable monitoring of malicious activity?Cisco NAC
Cisco IronPort
Cisco Security Agent
Cisco Catalyst switch
34 Which three statements describe zone-based policy firewall rules that govern interface behavior and the traffic moving
between zone member interfaces? (Choose three.)
An interface can be assigned to multiple security zones.
Interfaces can be assigned to a zone before the zone is created.
Pass, inspect, and drop options can only be applied between two zones.If traffic is to flow between all interfaces in a router, each interface must be a member of a zone.
Traffic is implicitly prevented from flowing by default among interfaces that are members of the same zone.
To permit traffic to and from a zone member interface, a policy allowing or inspecting traffic must be configured
between that zone and any other zone.
35
Refer to the exhibit. Based on the SDM screen shown, which two conclusions can be drawn about the IKE policy being
configured? (Choose two.)
It will use digital certificates for authentication.
It will use a predefined key for authentication.
It will use a very strong encryption algorithm.
It will be the default policy with the highest priority.
It is being created using the SDM VPN Quick Setup Wizard.
36 The use of 3DES within the IPsec framework is an example of which of the five IPsec building blocks?
authentication
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
14/17
confidentiality
Diffie-Hellman
integrity
nonrepudiation
37 Which statement describes the operation of the IKE protocol?It uses IPsec to establish the key exchange process.
It uses sophisticated hashing algorithms to transmit keys directly across a network.
It calculates shared keys based on the exchange of a series of data packets.
It uses TCP port 50 to exchange IKE information between the security gateways.
38 Which three types of views are available when configuring the Role-Based CLI Access feature? (Choose three.)superuser view
root viewsuperview
CLI view
admin view
config view
39 Which statement describes a MAC address table overflow attack?An attacker alters the MAC address in a frame to match the address of a target host.
Frames flood the LAN, creating excessive traffic and degrading network performance.
The attacking host broadcasts STP configuration and topology change BPDUs to force spanning-tree recalculatio
A software tool floods a switch with frames containing randomly generated source and destination MAC and IP
addresses.
40 When configuring a class map for zone-based policy firewall, how are the match criteria applied when using the
match-all parameter?
Traffic must match all of the match criteria specified in the statement.
Traffic must match the first criteria in the statement.
Traffic must match at least one of the match criteria statements.
Traffic must match according to an exclusive disjunction criteria.
41 Which three statements describe limitations in using privilege levels for assigning command authorization? (Choose thThere is no access control to specific interfaces on a router.
The root user must be assigned to each privilege level defined.
Commands set on a higher privilege level are not available for lower privileged users.
Views are required to define the CLI commands that each user can access.
Creating a user account that needs access to most but not all commands can be a tedious process.
It is required that all 16 privilege levels be defined, whether they are used or not.
42 What is an important difference between network-based and host-based intrusion prevention?
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
15/17
Host-based IPS is more scalable than network-based IPS.
Host-based IPS can work in promiscuous mode or inline mode.
Network-based IPS is better suited for inspection of SSL and TLS encrypted data flows.
Network-based IPS provides better protection against OS kernel-level attacks on hosts and servers.
Network-based IPS can provide protection to hosts without the need of installing specialized software on each on
43
8/8/2019 Ccnas Final
16/17
Refer to the exhibit. Based on the SDM NTP Server Details screen, which two conclusions can be drawn from the
information entered and check boxes checked? (Choose two.)
NTPv1 is being configured.
The IP address of the NTP server is 10.1.1.2.
The IP address of the NTP client is 10.1.1.2.
NTP messages will be sent and received on interface Serial0/0/0 for this router.
NTP routing updates will be sent and received on interface Serial0/0/0 of the NTP server.
46 Which two statements match a type of attack with an appropriate example? (Choose two.)To conduct an access attack, an attacker uses L0phtCrack to obtain a Windows server password.
To conduct an access attack, an attacker uses Wireshark to capture interesting network traffic.
To conduct a reconnaissance attack, an attacker initiates a ping of death attack to a targeted server.
To conduct a DoS attack, an attacker uses handler systems and zombies to obtain a Windows server password.
To conduct a DoS attack, an attacker initiates a smurf attack by sending a large number of ICMP requests to
directed broadcast addresses.
To conduct a reconnaissance attack, an attacker creates a TCP SYN flood causing the server to spawn many
half-open connections and become unresponsive.
47 The use of which two options are required for IPsec operation? (Choose two.)AH protocols for encryption and authentication
Diffie-Hellman to establish a shared-secret key
IKE to negotiate the SA
PKI for pre-shared-key authentication
SHA for encryption
48 Which three security services are provided by digital signatures? (Choose three.)
authenticates the source
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%238/8/2019 Ccnas Final
17/17
authenticates the destination
guarantees data has not changed in transit
provides nonrepudiation of transactions
provides nonrepudiation using HMAC functions
provides confidentiality of digitally signed data
49 Which three statements should be considered when applying ACLs to a Cisco router? (Choose three.)Place generic ACL entries at the top of the ACL.
Place more specific ACL entries at the top of the ACL.
Router-generated packets pass through ACLs on the router without filtering.
ACLs always search for the most specific entry before taking any filtering action.
A maximum of three IP access lists can be assigned to an interface per direction (in or out).
An access list applied to any interface without a configured ACL allows all traffic to pass.
50 Which consideration is important when implementing syslog in a network?Enable the highest level of syslog available to ensure logging of all possible event messages.
Log all messages to the system buffer so that they can be displayed when accessing the router.
Synchronize clocks on all network devices with a protocol such as Network Time Protocol.
Use SSH to access syslog information.
http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23http://assessment.netacad.net/virtuoso/delivery/pub-doc/exam.shtml#%23