Spankyty

CD ROM Mini CNCDrawing Plotter WithBetter Tolerances

VIEW IN BROWSER

updated 13. 5. 2019 | published 13. 5. 2019

N/A

1 pcs

f

0.20 mm

k

0.40 mm

h

PLA

2 g

d

MK2.5/S

PRUSAPRINTERS

Summary

My 3mm Rods did not fit right so I made the holes a bit bigger. I alsocombined the motor connector to the carriage so you don't need extrawork for yourself.

Hobby & Makers > RC & Robotics

cddrive dvddrive drawing xy plotter drawingrobot

miniplotter drawingmachine plot xyplotter penplotter

cd machine dvd drive arduino pen mini robot

Resolution: 0.2mm

Infill: 20%

Print Files (.gcode) DOWNLOAD ALL FILES

488.3 KB

0.32 hrs f 0.20 mm k 0.40 mm h PLA 2.00 g d MK2.5/S

updated 13. 5. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

133.9 KBupdated 13. 5. 2019

Find source .stl files on Thingiverse.com

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

carriage_20m.gcode

new_motor_carriage.stl