Date post: | 11-Jan-2015 |
Category: |
Documents |
Upload: | common-europe |
View: | 564 times |
Download: | 1 times |
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
IBM Power Systems
© 2012 IBM Corporation
CEC Wien 2012
IBM Power Systems Hardware News
© 2012 IBM Corporation
IBM Power Systems
Chronologie der POWER7 Ankündigungen ( Hardware )Februar 2010:
– POWER7 Technologie– Erste Generation der Power 750 und der Power 755– Power 770– Power 780
April 2010: – Blades PS700, PS701, PS702
August 2010:– Power 710, 730 – Power 720, 740– Power 795
April 2011:– Zweite Generation der Power 750 und der Power 755– Blades PS703, PS704
Juli 2011:– IBM Power 775 Supercomputer
Oktober 2011:– „C“-Modelle 710, 720, 730, 740, 770, 780
April 2012:– IBM PowerLinux 7R2 ( zwei Modelle: 8246-L2C, 8246-L2S ) – Als Teil der IBM PureFlex-Familie:
• POWER7-basierende IBM Flex Systeme p260 Compute Node ( 7895-22X ) und p460 Compute Node ( 7895-42X ) und p24L Compute Node ( 1457-7FL )
Übersicht über alle aktuellen Modelle ( Stand April 2012 ) ftp://public.dhe.ibm.com/common/ssi/ecm/en/poy03032usen/POY03032USEN.
Stand Mai 2012
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
Power Systems FamilieStand: März 2012
Power 770
Power 750
Power 780
PS701 Blade
Power 755
Power 795
Power 720
Power 740Power 710
Power 730
POWER7
PS702 Blade
PS703 Blade
PS704 Blade
PS700 Blade
Power 775HPC
IBM Systems Software
© 2012 IBM Corporation
IBM Power Systems
4
Agenda
Die neuen „C“ Modelle – Rückblick auf Oktober 2011
IBM i auf PureSystem – Ankündigung April 2012
I/O Ankündigungen
Planungsinformationen
PowerLinux
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
5
Verdoppelung der I/O Leistung– Gen2 Slots erlauben eine höhere I/O Performance und I/O Anforderungen
auf weniger Adapter zu konsolidieren
Verdoppelung der Hauptspeicherkapazität– 32 GB DIMMs verdoppeln das Hauptspeicher Maximum
RAID 10 Support im CEC
Neue I/O Erweiterungen für die Modelle 710 bis 740
710 730 720 740
Adapter E2B
E1C
E2B
E2C
E4B*
E4C
E6B*
E6C
Quad Ethernet 2x 1Gb / 2x 10GB nur Linux
Quad Ethernet 4x 1Gb nur Linux
XX
XX
XX
XX
XX
XX
Dual Port 10Gb Ethernet Adapter X X X X X X
4-Port 8 Gb Fiber Channel Adapter X X
6 Gbps SAS RAID Controller mit Cache X X X X X
Dual Port Quad Data Rate (QDR) InfiniBand Adapter X X X X X
* PCIe Gen2 riser required
© 2012 IBM Corporation
IBM Power Systems
Warum PCIe Gen 2…. Flexibilität, Performance, Preis-Leistung
Gen 2 Slots haben bis zu 2x mehr Bandbreite als Gen 1 Slots erlauben– Mehr Ports pro Adapter… speichert PCI Adapter/Slots und I/O Drawers– Mehr I/O Virtualisierung… speichert PCI Adapter/Slots und I/O Drawers– Mehr I/O Konsolidierungen… speichert PCI Adapter/Slots und I/O Drawers– Zukünftig höhere Geschwindigkeitsadapter so wie 16GB Fiber Channel– Besserer Support für hoch perfomante Adapter so wie
• QDR InfiniBand & 2-Port 10Gb Ethernet
Gen 1 Gen 2
Gen 1 und Gen 2 sehen Physisch gleich aus, aber…
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
Warum PCIe Gen2 - Beispiel
Mit Gen 1, könnten Sie heute haben:
Gen 2
LPAR1
LPAR2
LPAR3
LPAR4
Gen 2 Reduzierte AdapterMehr Partitionen
Verbesserung / Aufrechterhaltungeiner I/O Performance
Flexibel für mehr WachstumBessere Preis-Leistung
LPAR5
LPAR6
Und mit Gen2, könnten sie morgen das haben:
LPAR1
LPAR2
LPAR3
LPAR4
Gen 1Gen 1 Gen 1
© 2012 IBM Corporation
IBM Power Systems
Beispiel: PCIe Gen2 reduziert I/O Drawer
Wenn ein I/O drawer vermiedenwird– Spart $11,900 für #5802– Spart $217 monatliche
Wartung nach der Garantie– Spart $800 für 12X Kabel– Spart $ frühere Gen1 Adapter– Spart $ für Netzkabel und
PDU-Anschlüsse– Spart: Energie & Kühlung– Spart: 4U Platz im Rack
Gen 2 Gen 2Gen 2
Gen 1 Gen 2Gen 1
Gen 1 Gen 1Gen 1
CEC
#5802 I/O Drawer
#5802 I/O Drawer
Prices are USA suggested list prices for a model 740 as of October 2011 and are subject to change. Reseller prices may vary.
Flexbilität für mehrWachstum und besseremPreisleistungsverhältnis
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
9
Power 7108231-E1C
Power 7208202-E4C
Power 7308231-E2C
Power 7408205-E6C
Form Faktor 2U Rack 4U Rack oder Tower 2U Rack 4U Rack
Anzahl Cores 4, 6, 8 (ein Sockel)
4, 6, 8 (ein Sockel)
8 (2x4), 12, 16 (zwei Sockel)
4, 6 (ein Sockel)
8, 12, 16 (zwei Sockets)
Hauptspeicher 4 - 128 GB
Active Memory Expansion
4 - 256 GB
Active Memory Expansion
8 - 256 GB
Active Memory Expansion
8 - 512 GB
Active Memory Expansion
Erweiterungen Bis zu 102 Platten
und 5 PCIe Gen2 Slots
Bis zu 380 Platten
und 25 PCIe Gen2 Slots
Bis zu 378 Platten
und 25 PCIe Gen2 Slots
Bis zu 416 Platten
und 45 PCIe Gen2 Slots
Upgrade-möglichkeiten
Nicht verfügbar Power 520 Nicht verfügbar Nicht verfügbar
Neue Einstiegsmodelle
© 2012 IBM Corporation
IBM Power Systems
10
Power 720 / 740 4U Rack or TowerPower 720
8202-E4CPower 740
8205-E6C
Architecture4-core 3.0 GHz6-core 3.0 GHz 8 core 3.0 GHz
1 or 2 x 4-core 3.3 GHz 1 or 2 x 4-core 3.7 GHz 1 or 2 x 6-core 3.7 GHz1 or 2 x 8-core 3.55 GHz
Planar Single Socket Dual Socket Single Socket option
DDR3 Memory 2 / 4 / 8 / 16GB DIMMs4GB to 256GB
2 / 4 / 8 / 16GB DIMMs4GB to 512GB
SAS SFF Bays Up to 6 or 8 HDD or SSD
PCIe Gen2 Slots5 PCIe 8x Gen2 Full High (Base)
Plus slot dedicated to LANPlus 4 PCIe 8x Gen2 Low Profile (Optional)
Integrated SAS/SATA Cntrl
Yes / RAID 0/10 std (RAID 5/6 opt)Split Back plane Option
GX++ Slots One TwoIntegrated Ports 3 USB, 2 Serial, 2 HMC, 2 SPCNEthernet Std 2-port 10/100/1000Mb LAN adapterDVD bay 1 slim-lineTape/RDX bay 1 Half Height ( Optional )
12X IO Loop/Drawers Max 1 loop (0 4-core)Max 2 or 4 drawers
Max 2 loopsMax 4 or 8 drawers
Virt Management IVM & HMC & SDMC
Redundant Power and Cooling Yes ( Power Optional for 720 )
EnergyScale TPMDWarranty 3 Years
Power 720: 1S4UPower 740: 2S4U
Power 720: 1S4U
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
11
Power 720 PCIe Gen1 Layout (8202-E4B)
PowerSupply 1
Anchor Card
SPCN1SPCN2HMC1HMC2
S1S2
FSP
Op-Panel
SASController
SASController
RAID Card Battery
6 SFFDASD
SLIM DVD
DASDBkPlane
OptDASD
BkPlane
8 SFFDASD
Ext SAS
SLIM DVD
Tape
SN
SN
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
SN
SN
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
P7Chip
#1
IO Controller
Hub
PowerSupply 2 10
PCIeExpansion
PCIeG
en2PCIe
Gen2
PCIeG
en2PCIe
Gen2
P7IOCIO HubGX++ Slot20
TPMD 12X IB
USB
MUX
USB
USB
USBUSB
PCIe Gen1PCIe Gen1PCIe Gen1PCIe Gen1
RJ45RJ45
ENETPHY
RJ45RJ45
ENETPHY
SFP+SFP+
ENETPHY
4 x 1Gbt
2 x 10Gbt
IVE
© 2012 IBM Corporation
IBM Power Systems
12
Power 720 PCIe Gen2 Refresh Layout (8202-E4C)
PowerSupply 1
Anchor Card
SPCN1SPCN2HMC1HMC2
S1S2 TPMD
USB
MUX
FSP
Op-Panel
USB
USB
USB
SASController
SASController
RAID Card Battery
PCIeExpansion
PCIeG
en2PCIe
Gen2
PCIeG
en2PCIe
Gen2
P7IOCIO Hub
Tape
SN
SN
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
SN
SN
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
DIMM
P7Chip
#1
USB
P7IOC
IO Controller
Hub
PowerSupply 2 20
PCIeExpansion
PCIeG
en2PCIe
Gen2
PCIeG
en2PCIe
Gen2
P7IOCIO HubGX++ Slot
PCIe Gen2PCIe Gen2PCIe Gen 2PCIe Gen2
PCIe Gen2PCIe Gen2
Ethernet
12X IB
20
6 SFFDASD
SLIM DVD
DASDBkPlane
OptDASD
BkPlane
8 SFFDASD
Ext SAS
SLIM DVD
8 SFFDASD
Ext SAS
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
Power 520 zu Power 720 Upgrades
Power 7208202-E4C
Power 5208203-E4A
Einheitliches Power 520 zu Power 720 Upgrade Angebote
Power 7208202-E4B
4.2GHz 2c #5634
4.2GHz 4c #5635
4.7GHz 2c #5577
4.7GHz 4c #5587
3.0GHz 6c #8351
3.0GHz 8c #8352
3.0GHz 6c #EPC6
3.0GHz 8c #EPC7
© 2011 IBM Corporation
IBM Power Systems
Power 770 & 780 führt neue Funktionen ein
Doppelte I/O Bandbreite– PCI Gen2 verdoppelt die Bandbreite im Vergleich zu PCI Gen1
Doppelter Speicher– Neue 64 GB DIMM verdoppeln die Speicherkapazität zu 4 TB– Bis zu 64 GB pro Kern mit 8-Kern-Prozessoren
Doppelte Anzahl Sockets– Neue 780 Optionen verdoppeln die Nummer der Sockets– Kombiniert mit einem neuen 6-Kern-Prozessor @3.44 GHz– Voll konfiguriertes 780 System erhöht bis zu 96 Kernen
Zwei Kopien von dem Hypervisor Speicher– Aktives Speicher Mirroring verbessert die Verfügbarkeit
Höhere Taktfrequenz– Power 770 wächst zu 3.3 und 3.7 GHz– Power 780 wächst zu 3.92 GHz
Upgrades von vorhandenen Systemen, einschließlich derPOWER6 570s
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2011 IBM Corporation
IBM Power Systems
Neue Konfigurationen einschließlich PCI Gen2 I/O und einer neuen 4 Socket 780
Designt für neue “C” Modellemit PCI Gen2 I/O Backplane
Designt für neue 4 Socket konfigurationen mit neuer CPU Karte
und I/O Backplane
© 2011 IBM Corporation
IBM Power Systems
Beseitigen Sie Systemausfälleaufgrund von nicht korrigierbarenFehlern im Hypervisor Speicher
Protected Hypervisor
Partition
Größe des gespiegelten PoolsKann wachsen oder schrumpfen
Basierend auf Kundenbedürfnissen
PartitionPartition
MirroredMemory
Pool
MirroredMemory
Pool
Non-Mirrored Memory
Pool
Active Memory Mirroring für Hypervisors verbessert die Systemverfügbarkeit
Unterhält jederzeit zwei identischeKopien des System-Hypervisor-Speichers
Beide Kopien werden beiÄnderungen simultan geupdated
Im Falle eines Speicherfehlers auf der primären Kopie, wird die zweiteKopie automatisch aufgerufen und eine Benachrichtigung wird an IBM via Electronic Service Agend (ESA) gesendet
Serienausstattung der neuen Power 780 und optional verfügbarauf der neuen Power 770
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2011 IBM Corporation
IBM Power Systems
POWER7 System Upgrades – You can get there!Upgrades von POWER6, 6+ und POWER7
Power 7809179-MHC
POWER7 7809179-MHB
POWER6 5709117-MMA
Alle bestehenden Power 570 Systeme können auf POWER7Upgegradet werden
Power 7709117-MMC
POWER6 upgrades zu POWER7POWER6+ upgrades zu POWER7POWER7 upgrades zur neuen POWER7
POWER6 5709117-MMA
POWER7 7709117-MMB
© 2012 IBM Corporation
IBM Power Systems
Ethernet-Optionen für die „C“-Modelle
ACHTUNG: Kein IVE/HEA mehr in den „C“-Modellen 710, 720, 730, 740, 770, 780
Alternativlösungen:
– Für die „C“-Modelle 710, 720, 730, 740( d.h. 8231-E1C, 8202-E4C, 8231-E2C und 8205-E6C )
• Neu ( ab 25.05.2012 ) : PCIe2 4-port 1GbE Adapter ( Feature 5899 oder als LP Karte Feature 5260 )
• Bisher: 2-Port 10/100/1000 Base-TX Ethernet PCI Express Adapter ( Feature 9055 oder als LP Karte Feature 9056 )
– Für die „C“-Modelle 770 + 780 ( d.h. 9117-MMC und 9179-MHC ) gibt es eine Integrierte Multifunktions Karte ( Feature 1768 oder 1769 )
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
Integrierte Multifunktions Karte (9117-MMC und 9179-MHC)
Integrierte Multifunktions Karte mit Kupfer SFP+ (#1768)Integrierte Multifunktions Karte mit SR Optisch (#1769)
Jede Karte bietet:– Zwei 10 Gb Ethernet Ports (Kupfer oder optisch)– Zwei 1 GB Ethernet Ports – RJ45 Ports (Kupfer)– Zwei USB Ports– Einen seriellen Port
Für das erste und zweite Enclosure ist je eine Karte notwendig, fürEnclosure drei und vier ist sie optional
Die Karten #1768 und #1769 können gemischt und nachträglich geändertwerdenDie Multifunktions Karten sind nicht “hot-pluggable”Keine HEA-Adapter Funktionalität – Virtualisierung über den VIO Server
© 2011 IBM Corporation
IBM Power Systems
Zusammenfassung POWER7 Gen2 System Unit I/O Veränderungen
Aktualisierte Power 710/720/730/740 System Unit – Gen2 PCIe slots bieten 2x Erhöhung der PCI slot Bandbreite– Fügt einen PCIe Slot plus einen dedizierten Adapter Slot für das LAN– Drop IVE/HEA Adapter (Integrierter Virtueller Ehternet/Host Ethernet Adapter)
• Neuer niederiger Preis, 2.-Port 1GB Ethernet Adapter• New low price, 2-port 1Gb Ethernet Adapter features • Benutzer VIOS zum virtualisieren
Aktualisierte Power 770/780 Prozessor Anlage– Gen2 PCIe slots gibt 2x Erhöhung von PCI slots Bandbreite– Drop IVE/HEA Adapter (Integrierter Virtueller Ehternet/Host Ethernet Adapter)– Fügt neue integrierte Mutifunktions Karte
• 4-port (2 10Gb + 2 1Gb) Ethernet + USB ports + 1 serial port• Benutzt VIOS zum virtualisieren Ethernet Ports
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
21
Agenda
Die neuen „C“ Modelle – Rückblick auf Oktober 2011
IBM i auf PureSystem – Ankündigung April 2012
I/O Ankündigungen
Planungsinformationen
PowerLinux
© 2012 IBM Corporation22
IBM Power Systems
Storage
Networking
Virtualization
ManagementServers
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation23
IBM Power Systems
IBM PureFlexSystemHerausragend in der Erkennung und Vorhersage des Ressourcenbedarfs zur Optimierung Ihrer Infrastruktur
IBM PureApplicationSystemHerausragend bei der optimalen Bereitstellung und Ausführung von Applikationen für eine schnelle Time-to-Value
Die ersten beiden Mitglieder der IBM PureSystems Familie*
Siehe auch Vortrag Ralf Dannemann „ IBM Power Systems – Trend and Directions“
PureApplication = PureFlex+ Middleware(+ Application )
© 2012 IBM Corporation24
IBM Power Systems
Flex System Building Blocks
Compute NodesPower 2S/4S*x86 2S/4S
Storage NodeV7000Expansion inside or outside chassis
Management ApplianceOptional
Networking10/40GbE, FCoE, IB8/16Gb FC
ExpansionPCIeStorage
IBM PureFlex System
Vorkonfiguriertes, vorintegriertesInfrastruktur System mit Compute, Storage, Networking Modulen und,
Management von physikalischen und virtuellen Servern, sowie Entry Cloud
Management mitintegrierter Expertise.
Chassis14 half-wide bays for nodes
IBM PureApplication System
Vorkonfiguriertes, vorintegriertesPlattform System mit
Middleware, konzipiert fürtransaktionale Webanwendungen
auch für Clouds mitintegrierter Expertise.
Simplified Experience
* POWER7 Nodes sind verfügbar in PureFlex System Konfigurationen
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation25
IBM Power SystemsSy
stem
Infr
astr
uktu
r
IBM PureFlex Chassis
• 4 Switch Bays• 10U Chassis, 14 Bays• Standard und Full Width Node Support• Bis zu 6 2500W Netzteilen• Bis zu 8 Lüfter (skalierbar)• Integriertes Chassis Management
FRONT
Power Supplies (6X)
Scalable Switch Bays
10 U
Fans CMM14 Node
Bays(7 Full Wide)
Standard Node bays
IntegratedStorwize V7000
REAR
Integration ohne Kompromisse, designt für die nächste Dekade
Chassis
Infrastruktur die Multi Fabrics, Ethernet, FCoE, Fibre Channel
unterstützt◊
Energieeffiziente Kühlung◊
Multi-Chassis Management◊
Easy-to-use mit integriertenSingle-Point Management
◊Designt zum Support zukünftiger
Fortschritt in I/O, Prozessor, Memory und Storage
© 2012 IBM Corporation26
IBM Power Systems
Syst
em In
fras
truk
tur
IBM 4S EP Compute Node
IBM 2S EN Compute Node
IBM 2S EP Compute Node
IBM Dense Compute Node
Compute
System Portfolio an Workloads angepaßt
◊Geringere Anschaffungskosten durch
Virtualisierungskonsolidierung◊
Maximale Plattformfähigkeitenermöglicht Deployment Flexibility
IBM 4S Power7 Compute Node
IBM 2S Power7 Compute Node
IBM PCIe Expansion Node
Integration ohne Kompromisse, designt für die nächste Dekade
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation27
IBM Power SystemsSy
stem
infr
astr
uctu
re
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs Mezz 2
Mezz 1
POWER7Socket
IO Hub
IO Hub
POWER7Socket
2 x SAS 2.5” HDD or 2 x 1.8” SDD drives
RAID Controller
Compute
Standard Width compute node◊
2-socket Power7®◊
64-bit Power7® processor (12S technology)
◊16 core : 2 Socket x8 core
◊16 DIMMs DDR3, 1066 MHz, 256GB
Max
IBM 2S Power7 Compute Node
Integration ohne Kompromisse, designt für die nächste Dekade
© 2012 IBM Corporation28
IBM Power Systems
Syst
em in
fras
truc
ture
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs Mezz 2
Mezz 3
POWER7Socket
IO Hub
IO Hub
POWER7Socket
POWER7Socket
POWER7Socket
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs
DIMMs Mezz 4
Mezz 1
IO Hub
*HDD or SSD – Mounted on cover (located over memory)
Compute
Full Width compute node◊
4-socket Power7®◊
64-bit Power7® processor (12S technology)
◊32 core : 4 Socket x8 core
◊32 DIMMs DDR3, 1066 MHz, 512GB
Max
IBM 4S Power7 Compute Node
Integration ohne Kompromisse, designt für die nächste Dekade
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation29
IBM Power Systems
FlexSystems Manager – Das Herz der PureSystems
• Zentrale Einheit zur Verwaltung aller Ressourcen
• Integraler Bestandteil als PureSystems Appliance
• Profilbasierter Managementansatz
Servers Storage Networking
Integrated, Flexible Management
AIX i Linux Windows
AvailabilityVirtualizationPlatform
PowerVM KVM VMware HyperV
Servers Storage Networking
Integrated, Flexible Management
AIX i Linux Windows
AvailabilityVirtualizationPlatform
PowerVM KVM VMware HyperV
Überwachung der InfrastrukturVerwaltung von Strom und Kühlung
Bereitstellung von CPUs, Storage und NetzwerkDeployment von Workloads
Optimierung von WorkloadsAutomatisierung von Wartungsaufgaben
Automatisierung von “Fail over” und Backup Aufgaben
Management ApplianceOptional
© 2012 IBM Corporation30
IBM Power Systems
IBM i License Transfer und Flex System Compute Nodes
IBm I ist als hosted VIOS Partition in PureFlex Power Compute Nodes unterstützt
Die neuen Power7 Compute Nodes werden zum IBM i Entitlement Transfer Offering als mögliche Empfängersysteme hinzugefügt
– Group 5: IBM Flex System p260 Compute Node (7895-22X)IBM Flex System p460 Compute Node (7895-42X)
– Standard IBM i Terms & Conditions gelten
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation31
IBM Power Systems
YouTube
PureApplication verstehen: http://www.youtube.com/watch?v=C2_oiXggw4Q PureApplication System Part 1: http://www.youtube.com/watch?v=wnGNXvdJqN8 PureApplication System Part 2: http://www.youtube.com/watch?v=PFH6YU-_YcY
© 2012 IBM Corporation
IBM Power Systems
32
Agenda
Die neuen „C“ Modelle – Rückblick auf Oktober 2011
IBM i auf PureSystem – Ankündigung April 2012
I/O Ankündigungen
Planungsinformationen
PowerLinux
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
DAS & SAN - 2 gute Optionen
DASDirect Attached Storage
(“intern”)
SANStorage Area Network
(“extern”)
Beide sind strategisch
Beide haben ihre Stärken
Beide können in einem Server gleichzeitig verwendet werden
Schnellste (geringe Latency)
Üblicherweise geringe KostenHardware/Software
Oft einfacher zu konfigurieren
Schnell
Multi-server Sharing
Advanced Functions:Flash Copy, Metro/Global Mirror, Live Partition Mobility, Easy Tier
© 2012 IBM Corporation
IBM Power Systems
34
Neuer I/O Support für IBM i
Neue 387 GB SFF SSD:– 2X Performance, 2X Kapazität– Besseres Preis-Leistungs-Verhältnis
High performance low profile SAS SSD Adapter– RAID 5/6 mit nur einem Adapter (vs zwei)– Können die Kosten für die SSD Konfiguration senken
Neuer kleinerer Preis, 4-port 1Gb LAN Adapter– Nativer Support plus Support durch VIOS– Ersetzt existierende 2-Port und 4-Port LAN Adapter in den
meisten POWER7 Vorschlägen
Neue Konfigurationsoptionen für DAT160 über USB-angeschlossenes Bandlaufwerk
– Für Power 720/740/750 HH Bay der Systemeinheit– Support durch VIOS– Möglicherweise verbesserte Leistung für Speicherungen
und Wiederherstellungen
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
Neue SSD-only Gen2 SAS Adapter
Wesentlich höhere Perfomance als Gen1 Adapter– Bis zu 4.4 GB/s kontinuerlicher Durchsatz (2.2 GB per port)
– Bis zu 6-7x mehr SSD Workload vs #5805
Low Profle Fähigkeit– Keine anderen SAS SSD Adapter supporten Power 710/730 low Profile
PCIe Slots oder in PCIe Riser Card für Power 720/740– Auch verfügbar für full high PCIe Slots
Footprint einsparungen– RAID-5 in der Lage mit nur einem PCIe Slot (vs minimum von zwei PCI
Slots)
Verbessertes Preisleistung im Vergleich zu dem Paar von #5805 380MB SAS Adapter
• Bis zu einem PCIe Slot weniger der benutzt wird• Support von vielen SSD pro Adapter• Plus potentielle sichert einen #5887 EXP24S I/O drawer
#ESA2 = low profile version
#ESA1
© 2012 IBM Corporation
IBM Power Systems
Power DAS SSD Möglichkeiten: April 2012PCIe-based SSD SAS-bay-based SSD
( DAS = Direct Attached Storage ) #2053/54/55 In CEC w/ int
SAS contrlr#5805 & #5887***
#5913 & #5887***
#ESA1/A2 & #5887***
#5888 Ultra Drawer
Number PCIe slots used 2 (4 mirror) 0 2 2 2 0Number GX slots used 0 0 0 0 0 1-2 (710/730=2)
Max SSD attach 4 3-8 mdl dependent 9 24 24 30
Max 177GB busy SSD reasonably supported @
W1 4
W2 3-4
W1 2-3
W2 1-2
W1 4-6
W2 3-4
W1 ~24
W2 ~24
W1 ~24
W2 ~24
N/A
Max 387GB busy SSD reasonably supported @
N/A W1 1-2
W2 1
W1 2-3
W2 1-2
W1 ~20
W2 ~14
W1 ~18
W2 ~14
W1 ~22
W2 ~14Write cache (MB) 0 175 380 1800 0 3100
GB / SSD 177 177 or 387 177 or 387 177 or 387 177 or 387 387Servers supported
- Newest 710-740 (C models)
- Rest POWER7 710-795
- POWER6
Y
Y, except 795
Y, except 595
Y
Y, except 795
N
Y 710/730 limit**
Y not 710/730
Y 177GB SSD
Y 710/730 limit**
Y not 710/730
Y 177GB SSD
Y 720/740 limit *
N
N
710 740
N (SOD)
NAIX/IBM i/Linux support Y Y Y Y Y AIX / LinuxMix HDD & SSD N Y N Y N N (SOD)Rack space needed depends N/A 2U+ 2U+ 2U+ 1UEasy Tier N N N N N N (SOD)Approximate USA list price with zero SSD for Mdl 740
$3k + 2PCIe slots 0 $4.4k/pair + $5.4k drawer
$15k/pair + $5.4k drawer
$6.1k + 6.1k + $5.4k drwr
$24.5k + $2k PCIe adpter
PowerHA: share w/ 2 servers N N Y Y Y YPrices subject to change. Reseller prices can vary.
@ This is a simple rule of thumb. Actual reasonable maximum depends on many factors. * ESA1 not in 720/740 system unit. Can place in #5802/5877 I/O drawer attached to 720/740 ** Not in 710/730 system unit, but 730 (8231-E2C) can have in #5802/5877 I/O drawer *** Possible to use #5802 or 5803 I/O drawer instead of #5887 EXP24S Drawer. Max 177GB SSD attach would differ for #5913 and ESA1/ESA2W1 = transaction/command/DB2 type workload, smaller block, IOPS sensitive RAID5W2 = save/restore/large-file type workload, Throughput sensitive. RAID5 Assumes #5887 is in mode2 using two SAS ports for higher bandwidth.
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
USB-Attached DAT160 Band Laufwerk
80/160 DAT160 USB Band Laufwerk#EU16
Supported in HH bay of Power 720/740/750/755 (“B” or “C”) models
Supported mit AIX 5.3 oder spätere, REHL 5.8 oder spätere, SLES 10 oderspätere, VIOS 2.2.1.4 oder spätereIBM i Support durch VIOS
USB Kabelbefestigung im Server. Das Kable ist nicht sichtbar. Kable umfässt#EU16.USB Port auf 750/755 front Operator Panel nicht nutzbar wenn #EU16 angeschlossen ist.
Compare DAT80/160 Tape DrivesUSB attach (#EU16)SAS attach (#5619)
Gleiche Laufwerk PerformanceGleiche media cartridgesGleiche Laufwerks funktionenGleicher Preis($1,827) BUT #EU16 angeschlossen an internenUSB Port & teilt keine Ressourcen mitintegrierten SAS Kontroller welche die Festplatten in der Systemeinheit. Kann zukleineren Konflikten und damit zu einerbesseren I/O Performance kommen.
Prices are USA suggested list prices for a model 740 as of April 2012 and are subject to change. Reseller prices may vary.
© 2012 IBM Corporation
IBM Power Systems
Neuer EXP30 Ultra SSD I/O Drawer
1U Drawer … Bis zu 30 SSD
30 x 387 GB Drives = bis zu 11.6 TB
Großartige Performance– Bis zu 400,000 IOPS (100% read)– Bis zu 340,000 IOPS (60/40% read/write)– Bis zu 270,000 IOPS (100% write)– Bis zu 4.5 GB/s bandwidth
2 built-in, large-cache SAS Adapters, leistungsfähiger als der imOkt. 2011 angekündigte– Verbunden mit GX++ Slot der Power 710/720/730/740
Mai 2012:Power 710/730/720/740AIX and Linux
Weltklasse !!!
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
39
Agenda
Die neuen „C“ Modelle – Rückblick auf Oktober 2011
IBM i auf PureSystem – Ankündigung April 2012
I/O Ankündigungen
Planungsinformationen
PowerLinux
© 2012 IBM Corporation
IBM Power Systems
40
Management der nächsten Generation für Power Systems− Derselbe physische Formfaktor wie aktuelle HMC (CR6-Modell)− Kann gleichzeitig mit HMC während des Übergangs auf SDMC
verwendet werden− Verwaltet alle POWER6- und POWER7-Modelle− Auch verfügbar als virtuelle Appliance (für kleine Tier-Systeme)
Übergang zu standardisierten Managementprozessen− Verwendet IBM Systems Director-Benutzerschnittstelle− Unterstützt Übergruppe von HMC-Funktionen− Integriert Plattform- und Betriebssystemmanagement− Erhält die Kompatibilität für CLI und Skripten
Erweitertes Management für Power Blades− Verwaltet simultan Blades und Rack-basierte Server− Stellt umfassende PowerVM-Virtualisierungsfunktionen für Blades
bereit, einschließlich Dual VIOS für Redundanz und Performance− Unterstützt Live-Partition-Mobilität von Arbeitslasten zwischen Blades
und Rack-basierten Servern
IBM Systems Director Management Console (SDMC)Verwaltung von Power Blades und Rack-Based Servern
Verwaltung von bis zu 48 ServernUnterstützung von bis zu1024 VMs über verwalteteServerUmfassende PowerVM-Unterstützung für Blades, einschließlich Dual VIOSUnterstützung von Live-Partition-Mobilität zwischenServern und Blades
SDMC
Am 24. April
2012 abgekündigt!
IBM plans to optimize its Power Systems platform management solutions by enhancing the Hardware Management Console (HMC) and withdrawing from market the Systems Director Management Console (SDMC)
Clients currently using SDMC can either convert it to an HMC (change software only at no charge) or continue using the SDMC which will be supported until April 2015.
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
41
IBM i & POWER6 Planning Statement “heads up”
IBM plant für POWER6 Sever mit dem auf IBM i 7.1 folgenden Release keine HSL/RIO I/O Drawer zu unterstützen. Diese Aussage hat keinen Einfluss auf POWER7 Kunden oder IBM i 7.1-Kunden. POWER7 Server unterstützt keineHSL/RIO I/ Drawers und es gibt keine Änderungeren im IBM i 7.1 HSL/RIO Support.IBM i Kunden, welche ein HSL/RIO-Attached, I/O Drawer oder einen Tower so wie den #5094/5294, #0595/5095, #0588/5088, #5790, oder #5791/5794 sollten über eine Veränderung zum neueren 12X-Attached I/O drawer auf ihrem POWER6 Server nachdenken, bevorsie zu dem folgenden IBM i 7.1 Release wechseln. Beachten Sie, dass HSL/RIO I/O Drawers oder Tower die einzigenAnlagen sind, die auf einem POWER6 Server IOP Adapter unterstützen. Der Anbau an einigen älteren Geräten, wirdnur durch einen IOP-basierten Adapter zur Verfügung gestellt. Beispielsweise werden IOP-Kommunikationsadapter fürSDLC/SNA/X.25 Geräte benötigt. Ebenso ist ein IOP Adapter für ein Twinax-Gerät ohne Protokoll erforderlich. WeitereDetails finden Sie unter: www.ibm.com/systems/support/i/planning
*Die Aussagen von IBM über ihre Pläne, Richtungen und Absichten unterliegen Änderungen und können zurückgenommen werden und liegt im allgemeinen Ermessen der IBM. Informationenbezüglich zukünftiger Produkte sollen unsere allgemeine Produktrichtung skizzieren und sollte nicht als Grundlage für eine Kaufentscheidung dienen. Die genannten Informationen bezüglichmöglicher zukünftiger Produkte, ist keine Verpflichtung, ein Versprechen oder eine gesetzliche Verpflichtung, jeweiliges Material oder Funktionialität zu liefern. Informationen über möglichezukünftige Produkte, dürften nicht in einem Vertrag einbezogen werden. Die Entwicklung, veröffentlichung und der Zeitpunkt von zukünftigen Features oder Funktionalitäten für unsereProdukte, bleibt in unserem Ermessen.
POWER5 POWER6 POWER7IBM i 5.4 – yes HSL IBM i 5.4 – yes HSL n/aIBM i 6.1 – yes HSL IBM i 6.1 – yes HSL IBM i 6.1 – no HSL
n/a IBM i 7.1 – yes HSL IBM i 7.1 – no HSLn/a Next release – no HSL Next release – no HSL
Das heißt kein IOP-basierte I/O. Stattdessen 12X-attached I/O Drawer und PCIe oder PCI-X Adapter.
© 2012 IBM Corporation
IBM Power Systems
42
Power Hardware Planning Statements “heads up”
IBM Power Systems unterstützt weiterhin PCI-X Adapter und PCI-X I/O Drawers für viele Server Generationen unteranderem POWER4, POWER5, POWER6 and POWER7. IBM plant dass Power7 die letzte Generation ist, in denenPCI-X Adapter und PCI-X I/O drawers unterstützt sind. PCIe Adapter und I/O drawers bieten hohe Performance auf POWER6 und POWER7 Server um eine bessere Basis für zukünftige Server bereitzustellen.
In neuen Server wird älterer I/O nicht mehr unterstützt, welche nicht den Anorderungen hinsichtlich Performance und Funktionalität dn neuen Servern entspricht. Die folgende Planungsinformationen, soll Kunden bei der Planung neuerPOWER Servern zu helfen, welche direkt nach POWER7 folgen. IBM plant SAS-Festplatten auf diesen zukünftigenPower-Servern zu supporten, auch non-disk SCSI Geräte, sowie Band- oder optische Laufwerke, sofern PCI-X Slots verfügbar sind, jedoch keine SCSI Disk-Drives. Es ist nicht geplant, die #5786 EXP24 SCSI Disk Drawer, 3.5-inch SCSI bays,die #5782 PCI-X 1.5GB Cache SCSI Adapter und #5786 EXP24 nach POWER7 weiterhin zu supporten. Der SCSI #5736 PCI-X Adapter soll supported werden, soern ein Band- oder optische Laufwerke angebrauchtwurden.
POWER4 POWER7POWER6POWER5
POWER5 POWER6+POWER6POWER5+ POWER7
Keine SCSI Platten, nur SAS
Kein PCI-X
*Die Aussagen von IBM über ihre Pläne, Richtungen und Absichten unterliegen Änderungen und können zurückgenommen werden und liegt im allgemeinen Ermessen der IBM. Informationenbezüglich zukünftiger Produkte sollen unsere allgemeine Produktrichtung skizzieren und sollte nicht als Grundlage für eine Kaufentscheidung dienen. Die genannten Informationen bezüglichmöglicher zukünftiger Produkte, ist keine Verpflichtung, ein Versprechen oder eine gesetzliche Verpflichtung, jeweiliges Material oder Funktionialität zu liefern. Informationen über möglichezukünftige Produkte, dürften nicht in einem Vertrag einbezogen werden. Die Entwicklung, veröffentlichung und der Zeitpunkt von zukünftigen Features oder Funktionalitäten für unsereProdukte, bleibt in unserem Ermessen.
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
43
2012 Zurückziehung vom Marketing (nicht Support)Neue April Ankündigung
– SDMC feat of 7042-CR6 abgekündigt
Ankündigung Februar 2012– “B” Modelle der Power 710/720/730/740
• Effektives Ausscheiden im Mai 2012• “C” Modelle bereits im Vertrieb
– #5796 12X PCI-X I/O Drawer --• Letzte bestellbare Drawer für PCI-X slots• Effektives Ausscheiden Mai 2012
– 7216-1U2 Storage drawer• Ersetzt durch 7226-1U3, verfügbar bis März• Effektives Ausscheiden bis 27 April 2012
Erinnerung: Ankündigung 2011– #5886 EXP12S SAS storage drawer
• Effektiv Januar 2012• Last Drawer providing 3.5-inch SAS bays• 3.5-inch SAS Laufwerke sind immer noch verfügbar – “Bis jetzt” wurden noch
keine Rückzugsankündigungen gemacht!
Be alert, change coming
© 2012 IBM Corporation
IBM Power Systems
44
IBM i Zone in IBM developerWorks
ibm.com/developerworks/ibmi
Wichtige Quelle für die IBM i CommunitySehr viele technische Informationen
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
http://www-03.ibm.com/systems/power/community/index.html
© 2012 IBM Corporation
IBM Power Systems
46
Agenda
Die neuen „C“ Modelle – Rückblick auf Oktober 2011
IBM i auf PureSystem – Ankündigung April 2012
I/O Ankündigungen
Planungsinformationen
PowerLinux
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
47
Virtualisierung & Management
IBM PowerLinux SystemsIBM PowerLinux Systems
Zwei Formate verfügbar: Rack & Pure Systems
Betriebssystem
• Standardbreite IBM PureFlex Compute Node
• Nur Linux, POWER7• Zwei Sockets
1457-7FL
ExpertIntegratedSystems
• Linux nur POWER7• Zwei Sockets, 2U Rack
8246-L2C8246-L2S
© 2012 IBM Corporation
IBM Power Systems
IBM Confidential
Vorstellung von neuen IBM PowerLinuxTM Servern und LösungenIndustriestandards nur Linux Server optimiert für POWER Architektur
Hoher Wert,
Nur für Linux abgestimmte/angepasste Linux-Lösung, PowerLinux 2-socket
O ti i t W kl d i W t “
Big Data Analytics
Open Source Infrastructure
Services
Industry Application Solutions
PowerLinux bladeIBM PowerLinuxTM 7R2
IBM InfoSphereBigInsights, Streams
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
© Copyright IBM Corporation 2011IBM Confidential
IBM PowerLinuxTM US pricing comparisonDie PowerLinux 7R2 Preisgestaltung, ist direkt vergleichbar mit x86
Systemen
* Basierend auf einem Pre-GA Preismodell von PowerLinux 7R2 (24.04.2012) trifft vergleichbare Konfiguratinen, Source: dell.com, hp.com, vmware.com: 3/21/12
Server model Dell R720 HP Proliant DL380 G8 IBM PowerLinux 7R2
Processor16-core, 2.40 GHz
E5-2665, Sandy Bridge16-core, 2.4 GHz
E5-2665, Sandy Bridge16-core, 3.55 GHz POWER7
# of sockets 2 2 2
Total memory installed 32 GB 32GB 32 GB
Hard drives installed 2 x 300 GB, 10K SAS 2 x 300 GB,10K SAS 2 x 300 GB, 10K SAS
Network controller 4 x 1GbE 4 x 1GbE 4 x 1GbE
Storage controller SAS, DVD, RAID SAS, DVD, RAID SAS, DVD, RAID
Server list price* $7,579 $9,767 $8,953
Virtualization
- OTC + 3yr. 9x5 SWMA$9,374
VMware vSphere Enterpise 5
$9,374VMware vSphere Enterprise 5
$7,840 PowerVM for IBM PowerLinux
Linux OS list price- RHEL, 2 sockets, unlim.
guests, 9x5, 3 yr. sub./ supp.
$5,697Red Hat subscription and Red
Hat support
$5,697Red Hat subscription and Red
Hat support
$4,489Red Hat subscription and IBM
support
Total list price: Server/Virtualization/Linux $22,650 $24,838 $21,282
IBM Power Systems
© 2012 IBM Corporation
Vielen Dank für Ihre Aufmerksamkeit!
Fragen?
IBM Power Systems Hardware 20012 CEC Wien 2012
Dr. Wolfgang Rother
© 2012 IBM Corporation
IBM Power Systems
51
This document was developed for IBM offerings in the United States as of the date of publication. IBM may not make these offerings available in other countries, and the information is subject to change without notice. Consult your local IBM business contact for information on the IBM offerings available in your area.Information in this document concerning non-IBM products was obtained from the suppliers of these products or other public sources. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to these patents. Send license inquires, in writing, to IBM Director of Licensing, IBM Corporation, New Castle Drive, Armonk, NY 10504-1785 USA. All statements regarding IBM future direction and intent are subject to change or withdrawal without notice, and represent goals and objectives only. The information contained in this document has not been submitted to any formal IBM test and is provided "AS IS" with no warranties or guarantees either expressed or implied.All examples cited or described in this document are presented as illustrations of the manner in which some IBM products can be used and the results that may be achieved. Actual environmental costs and performance characteristics will vary depending on individual client configurations and conditions.IBM Global Financing offerings are provided through IBM Credit Corporation in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government clients. Rates are based on a client's credit rating, financing terms, offering type, equipment type and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension or withdrawal without notice.IBM is not responsible for printing errors in this document that result in pricing or information inaccuracies.All prices shown are IBM's United States suggested list prices and are subject to change without notice; reseller prices may vary.IBM hardware products are manufactured from new parts, or new and serviceable used parts. Regardless, our warranty terms apply.Any performance data contained in this document was determined in a controlled environment. Actual results may vary significantly and are dependent on many factors including system hardware configuration and software design and configuration. Some measurements quoted in this document may have been made on development-level systems. There is no guarantee these measurements will be the same on generally-available systems. Some measurements quoted in this document may have been estimated through extrapolation. Users of this document should verify the applicable data for their specific environment.
Special notices
© 2012 IBM Corporation
IBM Power Systems
52
IBM, the IBM logo, ibm.com AIX, AIX (logo), AIX 6 (logo), AS/400, BladeCenter, Blue Gene, ClusterProven, DB2, ESCON, i5/OS, i5/OS (logo), IBM Business Partner (logo), IntelliStation, LoadLeveler, Lotus, Lotus Notes, Notes, Operating System/400, OS/400, PartnerLink, PartnerWorld, PowerPC, pSeries, Rational, RISC System/6000, RS/6000, THINK, Tivoli, Tivoli (logo), Tivoli Management Environment, WebSphere, xSeries, z/OS, zSeries, AIX 5L, Chiphopper, Chipkill, Cloudscape, DB2 Universal Database, DS4000, DS6000, DS8000, EnergyScale, Enterprise Workload Manager, General Purpose File System, , GPFS, HACMP, HACMP/6000, HASM, IBM Systems Director Active Energy Manager, iSeries, Micro-Partitioning, POWER, PowerExecutive, PowerVM, PowerVM (logo), PowerHA, Power Architecture, Power Everywhere, Power Family, POWER Hypervisor, Power Systems, Power Systems (logo), Power Systems Software, Power Systems Software (logo), POWER2, POWER3, POWER4, POWER4+, POWER5, POWER5+, POWER6, POWER6+, System i, System p, System p5, System Storage, System z, Tivoli Enterprise, TME 10, Workload Partitions Manager and X-Architecture are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. If these and other IBM trademarked terms are marked on their first occurrence in this information with a trademark symbol (® or ™), these symbols indicate U.S. registered or common law trademarks owned by IBM at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml
The Power Architecture and Power.org wordmarks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org.UNIX is a registered trademark of The Open Group in the United States, other countries or both. Linux is a registered trademark of Linus Torvalds in the United States, other countries or both.Microsoft, Windows and the Windows logo are registered trademarks of Microsoft Corporation in the United States, other countries or both.Intel, Itanium, Pentium are registered trademarks and Xeon is a trademark of Intel Corporation or its subsidiaries in the United States, other countries or both.AMD Opteron is a trademark of Advanced Micro Devices, Inc.Java and all Java-based trademarks and logos are trademarks of Sun Microsystems, Inc. in the United States, other countries or both. TPC-C and TPC-H are trademarks of the Transaction Performance Processing Council (TPPC).SPECint, SPECfp, SPECjbb, SPECweb, SPECjAppServer, SPEC OMP, SPECviewperf, SPECapc, SPEChpc, SPECjvm, SPECmail, SPECimap and SPECsfs are trademarks of the Standard Performance Evaluation Corp (SPEC).NetBench is a registered trademark of Ziff Davis Media in the United States, other countries or both.AltiVec is a trademark of Freescale Semiconductor, Inc.Cell Broadband Engine is a trademark of Sony Computer Entertainment Inc.InfiniBand, InfiniBand Trade Association and the InfiniBand design marks are trademarks and/or service marks of the InfiniBand Trade Association. Other company, product and service names may be trademarks or service marks of others.
Special notices (cont.)