Drawing Title Drawing Number NOTES & REVISIONS: DRAWING ISSUED: Checked By: Scale: Drawn By: Project Number: HOPE HOUSE 243 SEARS STREET BUFFALO, NY 14212 CONSTRUCTION DOCUMENTS SHARS 20166065 DATE THE REGISTERED PROFESSIONAL CERTIFIES THAT THIS PROJECT HAS BEEN DESIGNED BY ME, OR UNDER MY SUPERVISION, IN ACCORDANCE WITH: THE BUILDING CODE OF NEW YORK STATE AND THE ENERGY CONSERVATION CODE OF NEW YORK STATE AND APPLICABLE FEDERAL LAWS AND REGULATIONS AND TO THE BEST OF MY KNOWLEDGE AND BELIEF, THESE CONSTRUCTION DOCUMENTS ARE IN CONFORMANCE THEREWITH. THESE DOCUMENTS, SUBMITTED FOR THE SPECIFIC PROJECT NAMELY THE RENOVATION OF SCHOOL # 57 243 SEARS STREET IN BUFFALO, NY 14212 AN INSTRUMENT OF SERVICE AND ARE NOT TO BE ALTERED, COPIED, OR USED FOR ANY OTHER PROJECT WITHOUT THE EXPRESSED WRITTEN PERMISSION OF FLYNN BATTAGLIA ARCHITECTS, PC. IT IS A VIOLATION OF THE LAW FOR ANY PERSON, UNLESS UNDER THE DIRECTION OF A LICENSED ARCHITECT OR ENGINEER, TO ALTER ANY ITEMS IN THESE DOCUMENTS IN ANY WAY. IF ANY ITEM IS ALTERED, THE ALTERING ARCHITECT/ENGINEER SHALL AFFIX HIS/HER SEAL ALONG WITH THE NOTATION "ALTERED BY" FOLLOWED BY HIS/HER SIGNATURE AND THE DATE OF SUCH ALTERATION, AND A SPECIFIC DESCRIPTION OF THE ALTERATION. COPYRIGHT 2017 FLYNN BATTAGLIA ARCHITECTS, PC, ALL RIGHTS RESERVED. 617 Main Street, Suite S401 Buffalo, New York 14203-1400 Telephone (716) 854-2424 Fax (716) 854-2428 Nov 03,2017 - 9:18am C:\Users\matt.shank\appdata\local\temp\AcPublish_9452\FP0-01.dwg OCTOBER 10, 2017 STUDIO T3 BUFFALO ENGINEERING, P.C. MEP ENGINEER CIVIL ENGINEER SIRACUSE ENGINEERS, P.C. STRUCTURAL ENGINEER MS ANALYTICAL ENVIRONMENTAL ENGINEER N BUFFALO ENGINEERING, P.C. 4245 UNION RD. BUFFALO, NY 14225 [P] 716.633.5300 [F] 716.633.5598 WWW.BUFFALOENGINEERING.COM MECHANICAL/ELECTRICAL ENGINEERS B.E. Project No. 217054 00254.00 As Indicated MRS DGI FIRE PROTECTION LEGENDS, NOTES, AND ABBREVIATIONS FP0-01
Transcript
Drawing Title
Drawing Number
NOTES & REVISIONS:
DRAWING ISSUED:
Checked By:
Scale:
Drawn By:
Project Number:
HOPE HOUSE
243 SEARS STREETBUFFALO, NY 14212
CONSTRUCTION DOCUMENTSSHARS 20166065
DATE
THE REGISTERED PROFESSIONALCERTIFIES THAT THIS PROJECT HASBEEN DESIGNED BY ME, OR UNDERMY SUPERVISION, INACCORDANCE WITH: THEBUILDING CODE OF NEW YORKSTATE AND THE ENERGYCONSERVATION CODE OF NEWYORK STATE AND APPLICABLEFEDERAL LAWS ANDREGULATIONS AND TO THE BESTOF MY KNOWLEDGE AND BELIEF,THESE CONSTRUCTIONDOCUMENTS ARE INCONFORMANCE THEREWITH.
THESE DOCUMENTS, SUBMITTED FOR THE SPECIFIC PROJECT NAMELY THERENOVATION OF SCHOOL # 57 243 SEARS STREET IN BUFFALO, NY 14212AN INSTRUMENT OF SERVICE AND ARE NOT TO BE ALTERED, COPIED, ORUSED FOR ANY OTHER PROJECT WITHOUT THE EXPRESSED WRITTENPERMISSION OF FLYNN BATTAGLIA ARCHITECTS, PC. IT IS A VIOLATIONOF THE LAW FOR ANY PERSON, UNLESS UNDER THE DIRECTION OF ALICENSED ARCHITECT OR ENGINEER, TO ALTER ANY ITEMS IN THESEDOCUMENTS IN ANY WAY. IF ANY ITEM IS ALTERED, THE ALTERINGARCHITECT/ENGINEER SHALL AFFIX HIS/HER SEAL ALONG WITH THENOTATION "ALTERED BY" FOLLOWED BY HIS/HER SIGNATURE AND THEDATE OF SUCH ALTERATION, AND A SPECIFIC DESCRIPTION OF THEALTERATION. COPYRIGHT 2017 FLYNN BATTAGLIA ARCHITECTS, PC, ALLRIGHTS RESERVED.
617 Main Street, Suite S401
Buffalo, New York 14203-1400Telephone (716) 854-2424Fax (716) 854-2428
N
ov 0
3,2
01
7 - 9
:1
8a
m
C:\U
se
rs\m
att.sh
an
k\a
pp
da
ta
\lo
ca
l\te
mp
\A
cP
ub
lish
_9
45
2\F
P0
-0
1.d
wg
OCTOBER 10, 2017
STUDIO T3
BUFFALO ENGINEERING, P.C.MEP ENGINEER
CIVIL ENGINEER
SIRACUSE ENGINEERS, P.C.STRUCTURAL
ENGINEER
MS ANALYTICALENVIRONMENTAL
ENGINEER
N
BUFFALO ENGINEERING, P.C.
4245 UNION RD. BUFFALO, NY 14225[P] 716.633.5300 [F] 716.633.5598
PROVIDE ADJUSTABLE PIPE SUPPORTS FOR PIPE AND DOUBLE CHECK VALVES (TYP)
AutoCAD SHX Text
4" DUCTILE IRON WATER SERVICE. REFER TO F-100FOR CONTINUATION.
AutoCAD SHX Text
NOTES: LOCATE BACKFLOW PREVENTION DEVICE AS FOLLOWS: A.8" TO 12" FROM BACK OF DEVICE AWAY FROM SUPPORTING WALL. 8" TO 12" FROM BACK OF DEVICE AWAY FROM SUPPORTING WALL. B.PROVIDE 30" OF CLEARANCE IN FRONT OF DEVICE. PROVIDE 30" OF CLEARANCE IN FRONT OF DEVICE. C.PROVIDE 12" OF CLEARANCE ABOVE DEVICE.PROVIDE 12" OF CLEARANCE ABOVE DEVICE.
AutoCAD SHX Text
4" FP PIPING TO 5" STORZ FDC
AutoCAD SHX Text
TS
AutoCAD SHX Text
4" BACKFLOW BYPASS TEST CONNECTION.
AutoCAD SHX Text
4" COMMERCIAL RISER MANIFOLD.
AutoCAD SHX Text
TS
AutoCAD SHX Text
FS
AutoCAD SHX Text
TS
AutoCAD SHX Text
FS
AutoCAD SHX Text
TO FP SYSTEM IN GROUND FLOOR
AutoCAD SHX Text
4" COMMERCIAL RISER MANIFOLD.
AutoCAD SHX Text
CHECK VALVE. (TYPICAL)
AutoCAD SHX Text
TS
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
WATER SERVICE RISER DETAIL
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-01
AutoCAD SHX Text
1
AutoCAD SHX Text
SPRINKLER SCHEDULE
AutoCAD SHX Text
SYMBOL DESCRIPTION TEMP. K-FACTOR NOTES LOCATIONS
AutoCAD SHX Text
SEMI RECESSED SIDEWALL, QUICK RESPONSE
AutoCAD SHX Text
FIRE DEPARTMENT CONNECTIONS
AutoCAD SHX Text
NOTES: 1.PROVIDE INTERMEDIATE TEMPERATURE RATED SPRINKLERS IN GENERATOR, MECHANICAL ROOMS, SKYLIGHTS & PROVIDE INTERMEDIATE TEMPERATURE RATED SPRINKLERS IN GENERATOR, MECHANICAL ROOMS, SKYLIGHTS & ELEVATOR PIT. PROVIDE SPRINKLERS IN COMPLIANCE WITH NFPA-13 (2013) TABLE 6.2.5.1. 2.PROVIDE HEAD GUARDS ON UPRIGHT SPRINKLERS WHERE REQUIRED AT LOWER ELEVATIONS. PROVIDE HEAD GUARDS ON UPRIGHT SPRINKLERS WHERE REQUIRED AT LOWER ELEVATIONS. 3.COORDINATE COVER PLATE COLOR AND SPRINKLER COLOR WITH ARCHITECT PRIOR TO ORDERING AND INSTALLATION.COORDINATE COVER PLATE COLOR AND SPRINKLER COLOR WITH ARCHITECT PRIOR TO ORDERING AND INSTALLATION.
(A1) SOUTHWEST CORNER OF SEARS ST. AND KENT ST. (B1) 1ST HYDRANT ON SEARS ST. SOUTH OF KENT ST.
AutoCAD SHX Text
MAIN SIZE
AutoCAD SHX Text
10-02-2017
AutoCAD SHX Text
A1 & B1
AutoCAD SHX Text
38
AutoCAD SHX Text
60
AutoCAD SHX Text
590
AutoCAD SHX Text
6 INCH ON SEARS ST., BUFFALO, NY.
AutoCAD SHX Text
TEST DATE
AutoCAD SHX Text
FLOW/RES. /RES. HYDRANT NO.
AutoCAD SHX Text
RESIDUAL PRESSURE
AutoCAD SHX Text
FLOW (GPM)
AutoCAD SHX Text
LOCATION
AutoCAD SHX Text
STATIC PRESSURE
AutoCAD SHX Text
HYDRANT FLOW TEST DATA
AutoCAD SHX Text
HOSE STREAM
AutoCAD SHX Text
100
AutoCAD SHX Text
250
AutoCAD SHX Text
100
AutoCAD SHX Text
100
AutoCAD SHX Text
SYSTEM TYPE
AutoCAD SHX Text
WET NFPA 13
AutoCAD SHX Text
WET NFPA 13
AutoCAD SHX Text
WET NFPA 13
AutoCAD SHX Text
WET NFPA 13
AutoCAD SHX Text
BUFFALO WATER
AutoCAD SHX Text
WATER FLOW SOURCE INFO FROM:
AutoCAD SHX Text
FDC
AutoCAD SHX Text
FS
AutoCAD SHX Text
TS
AutoCAD SHX Text
AFFABOVE FINISHED FLOOR ABOVE FINISHED FLOOR AFGABOVE FINISHED GRADE ABOVE FINISHED GRADE BDBALL DRIP BALL DRIP BVBALL VALVE BALL VALVE DCDADOUBLE CHECK DETECTOR ASSEMBLY DOUBLE CHECK DETECTOR ASSEMBLY DNDOWN DOWN DVDRAIN VALVE DRAIN VALVE EAEACH EACH ELECELECTRIC ELECTRIC EQUIPEQUIPMENT EQUIPMENT FACPFIRE ALARM CONTROL PANEL FIRE ALARM CONTROL PANEL FDCFIRE DEPARTMENT CONNECTION FIRE DEPARTMENT CONNECTION FFAFROM FLOOR ABOVE FROM FLOOR ABOVE FFBFROM FLOOR BELOW FROM FLOOR BELOW FPFIRE PROTECTION FIRE PROTECTION FSFLOW SWITCH FLOW SWITCH HVHOSE VALVE HOSE VALVE ITCINSPECTORS TEST CONNECTION INSPECTORS TEST CONNECTION NICNOT IN CONTRACT NOT IN CONTRACT NTSNOT TO SCALE NOT TO SCALE PIVPOST INDICATOR VALVE POST INDICATOR VALVE PSIPOUNDS PER SQUARE INCH POUNDS PER SQUARE INCH SPKLRSPRINKLER SPRINKLER TTEE TEE TFATO FLOOR ABOVE TO FLOOR ABOVE TFBTO FLOOR BELOW TO FLOOR BELOW TSTAMPER SWITCH TAMPER SWITCH VLVVALVE VALVE VIFVERIFY IN FIELD VERIFY IN FIELD VIRVALVE IN RISERVALVE IN RISER
AutoCAD SHX Text
SPRINKLER PIPING
AutoCAD SHX Text
PIPE TURNED UP
AutoCAD SHX Text
PIPE TURNED DOWN
AutoCAD SHX Text
CAP
AutoCAD SHX Text
FIRE DEPARTMENT CONNECTION
AutoCAD SHX Text
FLOW SWITCH
AutoCAD SHX Text
TAMPER SWITCH
AutoCAD SHX Text
OS&Y VALVE
AutoCAD SHX Text
GATE VALVE
AutoCAD SHX Text
CHECK VALVE
AutoCAD SHX Text
NOTE: ABBREVIATIONS AND SYMBOLS ON THIS DRAWING ARE FOR REFERENCE ONLY. ALL SYMBOLS MAY NOT BE USED IN THE FOLLOWING DOCUMENTS.
AutoCAD SHX Text
SYMBOLS
AutoCAD SHX Text
ABBREVIATIONS
AutoCAD SHX Text
DRAWING NOTE
AutoCAD SHX Text
P
AutoCAD SHX Text
PRESSURE GAUGE
AutoCAD SHX Text
FP
AutoCAD SHX Text
#
AutoCAD SHX Text
A.THE CONTRACTOR SHALL BE RESPONSIBLE FOR PROPER FIELD FITTING AND QUANTITY OF WORK. CONTRACTOR SHALL TAKE FIELD MEASUREMENTS THE CONTRACTOR SHALL BE RESPONSIBLE FOR PROPER FIELD FITTING AND QUANTITY OF WORK. CONTRACTOR SHALL TAKE FIELD MEASUREMENTS AS REQUIRED AND BE RESPONSIBLE FOR FITTING NEW CONSTRUCTION TO EXISTING CONSTRUCTION. CONTRACTOR SHALL BE RESPONSIBLE TO REPAIR ANY EXISTING CONDITIONS DISTURBED OR DAMAGED DURING CONSTRUCTION TO MATCH EXISTING SURFACE CONDITIONS. B.PERFORM FOR SITE INVESTIGATION PRIOR TO START OF WORK TO REVEAL EXISTING CONDITIONS. PERFORM FOR SITE INVESTIGATION PRIOR TO START OF WORK TO REVEAL EXISTING CONDITIONS. C.EXAMINE ALL DRAWINGS AND SPECIFICATIONS AND COORDINATE WORK WITH ALL OTHER TRADES. EXAMINE ALL DRAWINGS AND SPECIFICATIONS AND COORDINATE WORK WITH ALL OTHER TRADES. D.PROVIDE ALL CUTTING, PATCHING AND FIRE STOPPING REQUIRED TO ACCOMPLISH WORK SHOWN. PATCH AND SEAL OPENINGS TO MATCH ADJACENT PROVIDE ALL CUTTING, PATCHING AND FIRE STOPPING REQUIRED TO ACCOMPLISH WORK SHOWN. PATCH AND SEAL OPENINGS TO MATCH ADJACENT EXISTING WALLS, FLOORS, CEILINGS, ETC UNLESS OTHERWISE INDICATED. CONCEAL ALL WORK IN FINISHED AREAS UNLESS OTHERWISE INDICATED OR DIRECTED BY THE ARCHITECT. E.FIELD VERIFY ALL LOCATIONS AND DIMENSIONS OF (PIPING, DUCTWORK, EQUIPMENT, STRUCTURAL ELEMENTS, ETC.) PRIOR TO COMMENCING WITH FIELD VERIFY ALL LOCATIONS AND DIMENSIONS OF (PIPING, DUCTWORK, EQUIPMENT, STRUCTURAL ELEMENTS, ETC.) PRIOR TO COMMENCING WITH WORK. COORDINATE AND VERIFY THE INSTALLATION OF SPRINKLER EQUIPMENT AND PIPING AGAINST DUCTWORK, LIGHTING AND PIPING SHOP DRAWINGS FROM OTHER TRADES PRIOR TO COMMENCING WITH WORK. PROVIDE ALL IDENTIFIED CONFLICTS IN WRITING TO THE ARCHITECT. PROVIDE FITTINGS, TRANSITIONS, OFFSETS, ELEVATION CHANGES, ETC. TO MINIMIZE CONFLICTS WITH EXISTING CONDITIONS. F.THE DRAWINGS ARE SCHEMATIC IN INTENT. PROVIDE AND INSTALL ALL MATERIALS, EQUIPMENT, AND LABOR NECESSARY FOR A COMPLETE THE DRAWINGS ARE SCHEMATIC IN INTENT. PROVIDE AND INSTALL ALL MATERIALS, EQUIPMENT, AND LABOR NECESSARY FOR A COMPLETE INSTALLATION. ADJUST THE LOCATION OF ALL PIPING, EQUIPMENT AND CONNECTIONS TO ACCOMMODATE CONSTRUCTION CONDITIONS ENCOUNTERED; OBTAIN APPROVAL FROM THE ARCHITECT FOR ALL CHANGES. EQUIPMENT AND DEVICES SHALL BE FULLY ACCESSIBLE. G.INSTALL ALL EQUIPMENT AND SYSTEMS IN COMPLETE COMPLIANCE WITH GOVERNING CODES AS RECOGNIZED BY THE AUTHORITY HAVING JURISDICTION, INSTALL ALL EQUIPMENT AND SYSTEMS IN COMPLETE COMPLIANCE WITH GOVERNING CODES AS RECOGNIZED BY THE AUTHORITY HAVING JURISDICTION, MANUFACTURERS INSTALLATION INSTRUCTIONS AND SPECIFICATIONS. H.ALL PHYSICAL ATTRIBUTES OF SPECIFIED PRODUCTS ARE BASED ON THOSE MANUFACTURERS LISTED IN THE SPECIFICATIONS AND / OR THE ALL PHYSICAL ATTRIBUTES OF SPECIFIED PRODUCTS ARE BASED ON THOSE MANUFACTURERS LISTED IN THE SPECIFICATIONS AND / OR THE EQUIPMENT SCHEDULES. THE CONTRACTOR IS RESPONSIBLE FOR ALL DESIGN CHANGES BROUGHT ABOUT BY THE USE OF ITEMS SUBMITTED BY OTHER MANUFACTURERS AT NO COST TO OWNER. THE ENGINEER HAS RESERVED THE RIGHT TO REJECT ITEMS BY OTHER MANUFACTURERS FOR REASONS INCLUDING, BUT NOT LIMITED TO, THOSE ITEMS NOT MATCHING THE PHYSICAL ATTRIBUTES OF THE MANUFACTURERS LISTED. I.DO NOT SCALE DRAWINGS: REFER TO DIMENSIONED ARCHITECTURAL DRAWINGS TO DETERMINE EXACT LOCATION AND LENGTH OF ALL PIPING AND DO NOT SCALE DRAWINGS: REFER TO DIMENSIONED ARCHITECTURAL DRAWINGS TO DETERMINE EXACT LOCATION AND LENGTH OF ALL PIPING AND EQUIPMENT INSTALLED. J.LOCATE PIPING TO PREVENT FREEZING. DO NOT LOCATE ANY WET PIPING IN EXTERIOR WALLS OR IN UNHEATED SPACES. LOCATE PIPING TO PREVENT FREEZING. DO NOT LOCATE ANY WET PIPING IN EXTERIOR WALLS OR IN UNHEATED SPACES. K.PROVIDE FIRE STOPPING MATERIAL WHERE PIPING PENETRATES WALLS AND FLOORS. PROVIDE FIRE STOPPING MATERIAL WHERE PIPING PENETRATES WALLS AND FLOORS. L.MAINTAIN SPACING OF SPRINKLERS IN ACCORDANCE WITH NFPA 13. PROVIDE ADDITIONAL SPRINKLERS AT ALL LOCATIONS WHERE OBSTRUCTIONS OR MAINTAIN SPACING OF SPRINKLERS IN ACCORDANCE WITH NFPA 13. PROVIDE ADDITIONAL SPRINKLERS AT ALL LOCATIONS WHERE OBSTRUCTIONS OR OTHER ELEMENTS INTERFERE WITH SPRINKLER DISCHARGE REACHING THE PROTECTED AREA. M.COORDINATE THE LOCATION OF ALL DRAINS AND INSPECTOR'S TEST DRAINS TO PLUMBING DRAINS LOCATED IN UNFINISHED AREAS, AND SPECIFICALLY COORDINATE THE LOCATION OF ALL DRAINS AND INSPECTOR'S TEST DRAINS TO PLUMBING DRAINS LOCATED IN UNFINISHED AREAS, AND SPECIFICALLY PROVIDED FOR THIS PURPOSE, OR TO AN APPROVED EXTERIOR DRAINAGE LOCATION. N.PROVIDE ALL ACCESS PANELS NECESSARY FOR BALL DRIP, INSPECTOR'S TEST STATIONS, AND FOR ALL OTHER CONCEALED EQUIPMENT THAT PROVIDE ALL ACCESS PANELS NECESSARY FOR BALL DRIP, INSPECTOR'S TEST STATIONS, AND FOR ALL OTHER CONCEALED EQUIPMENT THAT REQUIRES ACCESS. O.LOCATE SPRINKLER HEADS IN THE CENTER OR QUARTER PANEL OF CEILING PANELS IN ALL FINISHED AREAS. LOCATE SPRINKLER HEADS IN THE CENTER OR QUARTER PANEL OF CEILING PANELS IN ALL FINISHED AREAS. P.PAINT ALL FIRE PROTECTION PIPING WHERE EXPOSED, COLOR AS SELECTED BY ARCHITECT. DO NOT PAINT SPRINKLERS. PAINT ALL FIRE PROTECTION PIPING WHERE EXPOSED, COLOR AS SELECTED BY ARCHITECT. DO NOT PAINT SPRINKLERS. Q.PERFORM ALL WORK IN COMPLIANCE WITH NFPA 13, 14, 25 (2013 VERSIONS) AND THE BUILDING CODE AND FIRE CODE OF NEW YORK STATE- (2015 PERFORM ALL WORK IN COMPLIANCE WITH NFPA 13, 14, 25 (2013 VERSIONS) AND THE BUILDING CODE AND FIRE CODE OF NEW YORK STATE- (2015 VERSION), AS WELL AS WITH ALL LOCAL AND FEDERAL CODES AND ORDINANCES, OTHER APPLICABLE NFPA STANDARDS AND REFERENCED STANDARDS. R.PROVIDE PIPING ROUGH IN FOR ALL WORK; OBTAIN ALL NECESSARY INSPECTIONS BY AUTHORITY HAVING JURISDICTION PRIOR TO CLOSING WALLS OR PROVIDE PIPING ROUGH IN FOR ALL WORK; OBTAIN ALL NECESSARY INSPECTIONS BY AUTHORITY HAVING JURISDICTION PRIOR TO CLOSING WALLS OR CEILINGS WHERE PIPING IS CONCEALED. S.THE DRAWINGS DO NOT INDICATE ALL OFFSETS, CHANGES IN ELEVATION, ETC., WHICH MAY BE REQUIRED. MAKE SUCH CHANGES IN THE PIPING AND THE DRAWINGS DO NOT INDICATE ALL OFFSETS, CHANGES IN ELEVATION, ETC., WHICH MAY BE REQUIRED. MAKE SUCH CHANGES IN THE PIPING AND LOCATION OF EQUIPMENT, ETC., TO ACCOMMODATE WORK, OBSTACLES, AND THE WORK OF OTHER CONTRACTORS. T.COORDINATE HOSE THREAD TYPES WITH THE LOCAL FIRE DEPARTMENT HAVING JURISDICTION. COORDINATE HOSE THREAD TYPES WITH THE LOCAL FIRE DEPARTMENT HAVING JURISDICTION. U.PROVIDE FOR THE ARRANGEMENT OF PIPING IN STAIRWELLS TO BE CLEAR OF THE AREA OF TRAVEL, AND TO NOT OBSTRUCT ANY MEANS OF PROVIDE FOR THE ARRANGEMENT OF PIPING IN STAIRWELLS TO BE CLEAR OF THE AREA OF TRAVEL, AND TO NOT OBSTRUCT ANY MEANS OF EGRESS. V.PROVIDE PENDENT OR CONCEALED SPRINKLERS IN ROOMS WITH SUSPENDED CEILINGS. PROVIDE UPRIGHT SPRINKLERS IN ROOMS WITHOUT SUSPENDED PROVIDE PENDENT OR CONCEALED SPRINKLERS IN ROOMS WITH SUSPENDED CEILINGS. PROVIDE UPRIGHT SPRINKLERS IN ROOMS WITHOUT SUSPENDED CEILINGS. VERIFY WITH ARCHITECTURAL REFLECTED CEILING PLANS. W.ALL PENETRATIONS IN CONCRETE/MASONRY WALLS BELOW GRADE FOR FIRE PROTECTION PIPING SHALL BE INSTALLED WITH SLEEVES. EXACT SLEEVE ALL PENETRATIONS IN CONCRETE/MASONRY WALLS BELOW GRADE FOR FIRE PROTECTION PIPING SHALL BE INSTALLED WITH SLEEVES. EXACT SLEEVE SIZES AND LOCATIONS SHALL BE DETERMINED AND COORDINATED IN THE FIELD BY THE CONTRACTOR PRIOR TO PLACEMENT OF CONCRETE. NOTE: SIX INCH DIAMETER SLEEVES OR SMALLER SHALL BE POSITIONED TO AVOID CONFLICT WITH STEEL REINFORCEMENT. ANY FOUNDATION WALL SLEEVES THAT ARE LARGER THAN SIX INCH DIAMETER SHALL BE IDENTIFIED BY THE CONTRACTOR ON STEEL REINFORCEMENT SHOP DRAWINGS FOR REVIEW BY STRUCTURAL ENGINEER. X.PROVIDE INDICATING-TYPE SPRINKLER CONTROL VALVES. PROVIDE INDICATING-TYPE SPRINKLER CONTROL VALVES. Y.SPRINKLER CONTROL VALVES SHALL BE LOCKED IN WIDE OPEN POSITION AND PROVIDED WITH TAMPER SWITCHES WIRED TO THE BUILDING FIRE ALARM SPRINKLER CONTROL VALVES SHALL BE LOCKED IN WIDE OPEN POSITION AND PROVIDED WITH TAMPER SWITCHES WIRED TO THE BUILDING FIRE ALARM SYSTEM. Z.ALL MATERIALS AND EQUIPMENT SHALL BE UL LISTED OR FM GLOBAL APPROVED. ALL MATERIALS AND EQUIPMENT SHALL BE UL LISTED OR FM GLOBAL APPROVED. AA.PROVIDE GALVANIZED PIPE FOR ALL FIRE DEPARTMENT AND DRY PIPE SPRINKLER SYSTEM PIPING. PROVIDE GALVANIZED PIPE FOR ALL FIRE DEPARTMENT AND DRY PIPE SPRINKLER SYSTEM PIPING. AB.HYDROSTATICALLY TEST ALL UNDERGROUND PIPING AT 200 PSIG FOR 2 HOURS. REPAIR LEAKS AND RE-TEST AS NECESSARY. HYDROSTATICALLY TEST ALL UNDERGROUND PIPING AT 200 PSIG FOR 2 HOURS. REPAIR LEAKS AND RE-TEST AS NECESSARY. AC.FLUSH UNDERGROUND MAINS IN ACCORDANCE WITH FM GLOBAL DATA SHEET 3-10 PRIOR TO CONNECTING TO ABOVE GROUND SPRINKLER SYSTEM FLUSH UNDERGROUND MAINS IN ACCORDANCE WITH FM GLOBAL DATA SHEET 3-10 PRIOR TO CONNECTING TO ABOVE GROUND SPRINKLER SYSTEM PIPING. AD.PROVIDE FOR THE PROPER OFF-SITE DISPOSAL OF ALL CONSTRUCTION DEBRIS AND/OR EXCAVATED MATERIALS ASSOCIATED WITH WORK IN THIS PROVIDE FOR THE PROPER OFF-SITE DISPOSAL OF ALL CONSTRUCTION DEBRIS AND/OR EXCAVATED MATERIALS ASSOCIATED WITH WORK IN THIS TRADE IN COMPLIANCE WITH LOCAL, NEW YORK STATE AND FEDERAL LAWS AND REQUIREMENTS. AE.SUBMIT APPROVED SPRINKLER PIPING DRAWINGS, WORKING PLANS, PREPARED ACCORDING TO NFPA AND 13, 2013 THAT HAVE BEEN APPROVED BY AUTHORITIES SUBMIT APPROVED SPRINKLER PIPING DRAWINGS, WORKING PLANS, PREPARED ACCORDING TO NFPA AND 13, 2013 THAT HAVE BEEN APPROVED BY AUTHORITIES HAVING JURISDICTION, INCLUDING HYDRAULIC CALCULATIONS. HYDRAULIC CALCULATIONS AND SHOP DRAWINGS SHALL BE PREPARED BY A NICET LEVEL III OR HIGHER TECHNICIAN UNDER THE DIRECTION OF A REGISTERED PROFESSIONAL ENGINEER REGISTERED IN NEW YORK STATE AND SHALL BE SEALED.
AutoCAD SHX Text
FIRE PROTECTION GENERAL NOTES
AutoCAD SHX Text
NOTES: 1.WATER FLOW DATA IS TO BE NO MORE THAN 12 MONTHS OLD PER NFPA 13, 2016 EDITION. PROVIDE FOR A NEW WATER FLOW DATA IS TO BE NO MORE THAN 12 MONTHS OLD PER NFPA 13, 2016 EDITION. PROVIDE FOR A NEW WATER FLOW FOR HYDRAULIC CALCULATIONS IF DESIGNED PAST THE 12 MONTH REQUIREMENT.
AutoCAD SHX Text
UPRIGHT QUICK RESPONSE
AutoCAD SHX Text
BRASS
AutoCAD SHX Text
ORDINARY / 5.6K RELIABLE- RA1425
AutoCAD SHX Text
BELOW DUCTWORK
Drawing Title
Drawing Number
NOTES & REVISIONS:
DRAWING ISSUED:
Checked By:
Scale:
Drawn By:
Project Number:
HOPE HOUSE
243 SEARS STREETBUFFALO, NY 14212
CONSTRUCTION DOCUMENTSSHARS 20166065
DATE
THE REGISTERED PROFESSIONALCERTIFIES THAT THIS PROJECT HASBEEN DESIGNED BY ME, OR UNDERMY SUPERVISION, INACCORDANCE WITH: THEBUILDING CODE OF NEW YORKSTATE AND THE ENERGYCONSERVATION CODE OF NEWYORK STATE AND APPLICABLEFEDERAL LAWS ANDREGULATIONS AND TO THE BESTOF MY KNOWLEDGE AND BELIEF,THESE CONSTRUCTIONDOCUMENTS ARE INCONFORMANCE THEREWITH.
THESE DOCUMENTS, SUBMITTED FOR THE SPECIFIC PROJECT NAMELY THERENOVATION OF SCHOOL # 57 243 SEARS STREET IN BUFFALO, NY 14212AN INSTRUMENT OF SERVICE AND ARE NOT TO BE ALTERED, COPIED, ORUSED FOR ANY OTHER PROJECT WITHOUT THE EXPRESSED WRITTENPERMISSION OF FLYNN BATTAGLIA ARCHITECTS, PC. IT IS A VIOLATIONOF THE LAW FOR ANY PERSON, UNLESS UNDER THE DIRECTION OF ALICENSED ARCHITECT OR ENGINEER, TO ALTER ANY ITEMS IN THESEDOCUMENTS IN ANY WAY. IF ANY ITEM IS ALTERED, THE ALTERINGARCHITECT/ENGINEER SHALL AFFIX HIS/HER SEAL ALONG WITH THENOTATION "ALTERED BY" FOLLOWED BY HIS/HER SIGNATURE AND THEDATE OF SUCH ALTERATION, AND A SPECIFIC DESCRIPTION OF THEALTERATION. COPYRIGHT 2017 FLYNN BATTAGLIA ARCHITECTS, PC, ALLRIGHTS RESERVED.
617 Main Street, Suite S401Buffalo, New York 14203-1400
Telephone (716) 854-2424Fax (716) 854-2428
N
ov 0
3,2
01
7 - 9
:1
8a
m
C:\U
se
rs\m
att.sh
an
k\a
pp
da
ta
\lo
ca
l\te
mp
\A
cP
ub
lish
_9
45
2\F
P0
-0
1.d
wg
OCTOBER 10, 2017
STUDIO T3
BUFFALO ENGINEERING, P.C.MEP ENGINEER
CIVIL ENGINEER
SIRACUSE ENGINEERS, P.C.STRUCTURAL
ENGINEER
MS ANALYTICALENVIRONMENTAL
ENGINEER
N
BUFFALO ENGINEERING, P.C.
4245 UNION RD. BUFFALO, NY 14225[P] 716.633.5300 [F] 716.633.5598
WWW.BUFFALOENGINEERING.COM
MECHANICAL/ELECTRICAL ENGINEERS
B.E. Project No. 217054
00254.00 As Indicated
MRS DGI
FIRE PROTECTION DETAILS
FP0-02
AutoCAD SHX Text
6" CONTROL VALVE W/ SUPERVISORY SWITCH.
AutoCAD SHX Text
6" COMMERCIAL RISER MANIFOLD.
AutoCAD SHX Text
PRESSURE GAUGE
AutoCAD SHX Text
6" WATERFLOW DETECTOR
AutoCAD SHX Text
TEST AND DRAIN
AutoCAD SHX Text
3-WAY VALVE
AutoCAD SHX Text
6" CHECK VALVE
AutoCAD SHX Text
2" DRAIN TO EXTERIOR OF BUILDING AND/OR NEAREST FLOOR DRAIN.
AutoCAD SHX Text
TS
AutoCAD SHX Text
FS
AutoCAD SHX Text
WIRE FLOW SWITCH TO F.A.C.P.
AutoCAD SHX Text
4" CONTROL VALVE W/ SUPERVISORY SWITCH.
AutoCAD SHX Text
4" COMMERCIAL RISER MANIFOLD.
AutoCAD SHX Text
PRESSURE GAUGE
AutoCAD SHX Text
4" WATERFLOW DETECTOR
AutoCAD SHX Text
TEST AND DRAIN
AutoCAD SHX Text
3-WAY VALVE
AutoCAD SHX Text
4" WET RISER/STANDPIPE
AutoCAD SHX Text
2"
AutoCAD SHX Text
CHECK VALVE
AutoCAD SHX Text
2" DRAIN TO EXTERIOR OF BUILDING.
AutoCAD SHX Text
TS
AutoCAD SHX Text
FS
AutoCAD SHX Text
NOTE: A.LOCATE RISER MANIFOLD ASSEMBLY BEHIND ACCESS DOOR LOCATE RISER MANIFOLD ASSEMBLY BEHIND ACCESS DOOR IN ACCESSIBLE LOCATION. COORDINATE LOCATION WITH GENERAL CONTRACTOR AND ARCHITECT PRIOR TO INSTALLATION.
AutoCAD SHX Text
2" DRAIN PIPE STACK
AutoCAD SHX Text
ENCLOSURE
AutoCAD SHX Text
COVER PLATE
AutoCAD SHX Text
EJECTION SPRING
AutoCAD SHX Text
ELEMENTS TO BE
AutoCAD SHX Text
NON-COMBUSTIBLE.
AutoCAD SHX Text
SUSPENDED CEILING
AutoCAD SHX Text
PENDENT SPRINKLER
AutoCAD SHX Text
AS REQUIRED
AutoCAD SHX Text
FINISHED CEILING
AutoCAD SHX Text
(SMOOTH CONCRETE
AutoCAD SHX Text
SLAB) ALL CEILING
AutoCAD SHX Text
1"x1/2" REDUCER
AutoCAD SHX Text
1" ELBOW
AutoCAD SHX Text
1" PIPE , LENGTH
AutoCAD SHX Text
4" FP PIPING TO SYSTEM
AutoCAD SHX Text
& NUT ASSMB.
AutoCAD SHX Text
CLAMP W./BOLT
AutoCAD SHX Text
RISER CLAMP
AutoCAD SHX Text
PIPE
AutoCAD SHX Text
Description
AutoCAD SHX Text
WATERTIGHT SLEEVE
AutoCAD SHX Text
ALL RODS 3/4" DIA.
AutoCAD SHX Text
SLEEVE AND SEAL
AutoCAD SHX Text
FINISHED GRADE
AutoCAD SHX Text
THRUST BLOCK
AutoCAD SHX Text
FIRE MAIN
AutoCAD SHX Text
4
AutoCAD SHX Text
6
AutoCAD SHX Text
5
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
Mark
AutoCAD SHX Text
1
AutoCAD SHX Text
3"
AutoCAD SHX Text
18"
AutoCAD SHX Text
5'-0" MIN.
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
1
AutoCAD SHX Text
5
AutoCAD SHX Text
ALUMINUM JACKET WITH FACTORY APPLIED MOISTURE BARRIER. EXTEND 2" BOTH SIDES & SECURE BOTH ENDS 2 WITH A BAND
AutoCAD SHX Text
MASONRY WALL/FLOOR
AutoCAD SHX Text
SCHEDULE 40 STEEL OR CAST-IRON PIPE SLEEVE CUT FLUSH WITH WALL
AutoCAD SHX Text
BACKUP MATERIAL
AutoCAD SHX Text
INSULATION (WHERE REQUIRED)
AutoCAD SHX Text
MINIMUM 1/4" GAP ALL AROUND PIPE
AutoCAD SHX Text
PROVIDE ESCUTCHEON FOR EXPOSED PIPING OMIT INSIDE MECH. ROOMS. (TYP. FOR 2)
AutoCAD SHX Text
SEALANT
AutoCAD SHX Text
KEYED NOTES: : 1.FOR GYP. BOARD WALLS PROVIDE MIN. 16 GAUGE GALV. STEEL SLEEVE W/ LOCK-TYPE FOR GYP. BOARD WALLS PROVIDE MIN. 16 GAUGE GALV. STEEL SLEEVE W/ LOCK-TYPE PROVIDE MIN. 16 GAUGE GALV. STEEL SLEEVE W/ LOCK-TYPE LONGITUDINAL SEAM 2.OMIT ALUMINUM JACKET IF PIPING IS UNINSULATED.OMIT ALUMINUM JACKET IF PIPING IS UNINSULATED.
AutoCAD SHX Text
GENERAL NOTES: : A.FOR RATED WALLS, INSTALL APPLICABLE UL LISTED THROUGH-PENETRATION FIRESTOP FOR RATED WALLS, INSTALL APPLICABLE UL LISTED THROUGH-PENETRATION FIRESTOP SYSTEM. REFER TO 078413 "PENETRATION FIRESTOPPING"
AutoCAD SHX Text
BRANCH LINE
AutoCAD SHX Text
TEE
AutoCAD SHX Text
(IF NECESSARY)
AutoCAD SHX Text
PIPE NIPPLE
AutoCAD SHX Text
REDUCER
AutoCAD SHX Text
UPRIGHT SPRINKLER
AutoCAD SHX Text
DECK
AutoCAD SHX Text
UNDERSIDE OF
AutoCAD SHX Text
UL LISTED CLEVIS HANGER ANCHOR TO DECK ABOVE
AutoCAD SHX Text
1" MINIMUM
AutoCAD SHX Text
12" MAXIMUM
AutoCAD SHX Text
2" MAIN SYSTEM DRAIN
AutoCAD SHX Text
EXTERIOR WALL
AutoCAD SHX Text
SPLASH BLOCK
AutoCAD SHX Text
1'-0" MAX TO GRADE.
AutoCAD SHX Text
PROVIDEE 45 DEGREE GALVANIZED STEEL ELBOW ON EXTERIOR OF BUILDING WALL. PRIME AND PAINT TO MATCH EXTERIOR WALL FINISH.
AutoCAD SHX Text
CORE DRILL WALL. PROVIDE SLEEVES AND SEAL PIPE PENETRATION THROUGH WALL WITH GROUT TO MATCH FINISH.
AutoCAD SHX Text
SPLIT RING PIPE SUPPORT
AutoCAD SHX Text
SPRINKLER
AutoCAD SHX Text
SIDEWALL
AutoCAD SHX Text
18"
AutoCAD SHX Text
WALL
AutoCAD SHX Text
1"
AutoCAD SHX Text
1"
AutoCAD SHX Text
1" X 1/2"
AutoCAD SHX Text
REDUCER
AutoCAD SHX Text
TOP OF ELEVATOR SHAFT
AutoCAD SHX Text
ELEVATOR PIT
AutoCAD SHX Text
GRADE
AutoCAD SHX Text
10'-0" AFG
AutoCAD SHX Text
ELECTRIC BELL
AutoCAD SHX Text
10'-0" +/-
AutoCAD SHX Text
FDC
AutoCAD SHX Text
1'-6" AFG MINIMUM 4'-0" AFG MAXIMUM
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
FLOOR CONTROL RISER MANIFOLD
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
1
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
RETURN BEND ASSEMBLY
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
2
AutoCAD SHX Text
CONCEALED SPRINKLER TYPICAL
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
COMMERCIAL RISER ASSEMBLY
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
3
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
RISER CLAMP
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
4
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
FIRE MAIN ENTRANCE
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
5
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
SPLASH BLOCK
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
6
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
TYPICAL UPRIGHT SPRINKLER HEAD
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
7
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
WALL/FLOOR PIPE SLEEVE PENETRATION DETAIL
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
8
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
FIRE_RATED WALL PIPE PENETRATION DETAIL
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
9
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ELEVATOR SHAFT SPRINKLER
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
10
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ELECTRIC BELL DETAIL
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-02
AutoCAD SHX Text
11
AutoCAD SHX Text
FIRE RATED WALL
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text
OR DRAWING
AutoCAD SHX Text
PER SPECS)
AutoCAD SHX Text
(WHERE REQ'D
AutoCAD SHX Text
ESCUTCHEON
AutoCAD SHX Text
UL LISTED FIRE STOPPING ASSEMBLY
AutoCAD SHX Text
TO WALL
AutoCAD SHX Text
ATTACH SECURELY
AutoCAD SHX Text
STEEL PIPE SLEEVE
AutoCAD SHX Text
SCHEDULE 40 GALV.
AutoCAD SHX Text
PIPE
Drawing Title
Drawing Number
NOTES & REVISIONS:
DRAWING ISSUED:
Checked By:
Scale:
Drawn By:
Project Number:
HOPE HOUSE
243 SEARS STREETBUFFALO, NY 14212
CONSTRUCTION DOCUMENTSSHARS 20166065
DATE
THE REGISTERED PROFESSIONALCERTIFIES THAT THIS PROJECT HASBEEN DESIGNED BY ME, OR UNDERMY SUPERVISION, INACCORDANCE WITH: THEBUILDING CODE OF NEW YORKSTATE AND THE ENERGYCONSERVATION CODE OF NEWYORK STATE AND APPLICABLEFEDERAL LAWS ANDREGULATIONS AND TO THE BESTOF MY KNOWLEDGE AND BELIEF,THESE CONSTRUCTIONDOCUMENTS ARE INCONFORMANCE THEREWITH.
THESE DOCUMENTS, SUBMITTED FOR THE SPECIFIC PROJECT NAMELY THERENOVATION OF SCHOOL # 57 243 SEARS STREET IN BUFFALO, NY 14212AN INSTRUMENT OF SERVICE AND ARE NOT TO BE ALTERED, COPIED, ORUSED FOR ANY OTHER PROJECT WITHOUT THE EXPRESSED WRITTENPERMISSION OF FLYNN BATTAGLIA ARCHITECTS, PC. IT IS A VIOLATIONOF THE LAW FOR ANY PERSON, UNLESS UNDER THE DIRECTION OF ALICENSED ARCHITECT OR ENGINEER, TO ALTER ANY ITEMS IN THESEDOCUMENTS IN ANY WAY. IF ANY ITEM IS ALTERED, THE ALTERINGARCHITECT/ENGINEER SHALL AFFIX HIS/HER SEAL ALONG WITH THENOTATION "ALTERED BY" FOLLOWED BY HIS/HER SIGNATURE AND THEDATE OF SUCH ALTERATION, AND A SPECIFIC DESCRIPTION OF THEALTERATION. COPYRIGHT 2017 FLYNN BATTAGLIA ARCHITECTS, PC, ALLRIGHTS RESERVED.
617 Main Street, Suite S401
Buffalo, New York 14203-1400Telephone (716) 854-2424Fax (716) 854-2428
N
ov 0
3,2
01
7 - 9
:1
8a
m
C:\U
se
rs\m
att.sh
an
k\a
pp
da
ta
\lo
ca
l\te
mp
\A
cP
ub
lish
_9
45
2\F
P0
-0
1.d
wg
OCTOBER 10, 2017
STUDIO T3
BUFFALO ENGINEERING, P.C.MEP ENGINEER
CIVIL ENGINEER
SIRACUSE ENGINEERS, P.C.STRUCTURAL
ENGINEER
MS ANALYTICALENVIRONMENTAL
ENGINEER
N
BUFFALO ENGINEERING, P.C.
4245 UNION RD. BUFFALO, NY 14225[P] 716.633.5300 [F] 716.633.5598
WWW.BUFFALOENGINEERING.COM
MECHANICAL/ELECTRICAL ENGINEERS
B.E. Project No. 217054
00254.00 As Indicated
MRS DGI
FIRE PROTECTION DETAILS
FP0-03
AutoCAD SHX Text
4" SWING CHECK VALVE
AutoCAD SHX Text
C
AutoCAD SHX Text
18" MINIMUM
AutoCAD SHX Text
L
AutoCAD SHX Text
LOWER LEVEL
AutoCAD SHX Text
NOTES: 1.PROVIDE PROPER SIGNAGE PER NFPA 13.PROVIDE PROPER SIGNAGE PER NFPA 13.
AutoCAD SHX Text
DRAIN PIPING SPILL TO GRADE.
AutoCAD SHX Text
5" X 4" 30° STORZ FIREDEPARTMENT CONNECTION WITH CAP AND CHAIN.
AutoCAD SHX Text
3/4" AUTO BALL DRIP VALVE - TERMINATE DRAIN LINE TO EXTERIOR
AutoCAD SHX Text
FINISH GRADE
AutoCAD SHX Text
EXTERIOR BUILDING WALL
AutoCAD SHX Text
4'-0" MAXIMUM
AutoCAD SHX Text
TO WET SYSTEM
AutoCAD SHX Text
TS
AutoCAD SHX Text
4"
AutoCAD SHX Text
4"
AutoCAD SHX Text
2"
AutoCAD SHX Text
BACKFLOW PREVENTION DEVICE BYPASS TEST DEVICE.
AutoCAD SHX Text
4"
AutoCAD SHX Text
REFER TO PLANS FOR CONTINUATION
AutoCAD SHX Text
TEE
AutoCAD SHX Text
(IF NECESSARY)
AutoCAD SHX Text
PIPE NIPPLE
AutoCAD SHX Text
UPRIGHT SPRINKLER
AutoCAD SHX Text
DECK
AutoCAD SHX Text
UNDERSIDE OF
AutoCAD SHX Text
UL LISTED CLEVIS HANGER ANCHOR TO DECK ABOVE IF NEEDED
AutoCAD SHX Text
1" MINIMUM
AutoCAD SHX Text
12" MAXIMUM
AutoCAD SHX Text
90%%d ELL
AutoCAD SHX Text
BRANCH OR MAIN
AutoCAD SHX Text
RISER NIPPLE UP
AutoCAD SHX Text
REDUCER
AutoCAD SHX Text
CEILING
AutoCAD SHX Text
REDUCER
AutoCAD SHX Text
90%%d ELL
AutoCAD SHX Text
BRANCH OR MAIN
AutoCAD SHX Text
CEILING AND OR
AutoCAD SHX Text
4" TO 6"
AutoCAD SHX Text
CEILING POCKET
AutoCAD SHX Text
ADJUSTMENT
AutoCAD SHX Text
SIDEWALL
AutoCAD SHX Text
SPRINKLER
AutoCAD SHX Text
RISER NIPPLE UP
AutoCAD SHX Text
ALL THREAD ROD
AutoCAD SHX Text
PIPE RING
AutoCAD SHX Text
C-CLAMP WITH
AutoCAD SHX Text
LOCKNUT
AutoCAD SHX Text
PIPE RING
AutoCAD SHX Text
CONCRETE ANCHOR
AutoCAD SHX Text
ALL THREAD ROD
AutoCAD SHX Text
UPON FRAMING MEMBER)
AutoCAD SHX Text
NOTE: USE WHERE SPANNING BETWEEN STRUCTURAL MEMBERS.
AutoCAD SHX Text
ADJUSTABLE
AutoCAD SHX Text
ALL THREAD
AutoCAD SHX Text
ROD STUD w/PIPE RING
AutoCAD SHX Text
PIPE RING
AutoCAD SHX Text
ROD
AutoCAD SHX Text
PIPE RING
AutoCAD SHX Text
PIPE SIZED PER NFPA 13 CHART
AutoCAD SHX Text
DETERMINED BY SPAN & PIPE
AutoCAD SHX Text
%%UTRAPEZE HANGER
AutoCAD SHX Text
CLAMP (TYPE DEPENDS
AutoCAD SHX Text
SIZE SUPPORTED
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
TYPICAL WET FIRE DEPARTMENT CONNECTION
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-03
AutoCAD SHX Text
1
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ABOVE AND BELOW TYPICAL RETURN BEND ASSEMBLY
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-03
AutoCAD SHX Text
2
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
HORIZONTAL SIDEWALL SPRINKLER
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-03
AutoCAD SHX Text
3
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
TYPICAL HANGER
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-03
AutoCAD SHX Text
4
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
TOP/BOTTOM BEAM C-CLAMP HANGER
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-03
AutoCAD SHX Text
5
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
TRAPEZE HANGER DETAIL
AutoCAD SHX Text
NONE
AutoCAD SHX Text
FP0-03
AutoCAD SHX Text
6
AutoCAD SHX Text
PROVIDE FIRE DEPARTMENT CONNECTION WITHOUT CLAPPER.
gov
Drawing Title
Drawing Number
NOTES & REVISIONS:
DRAWING ISSUED:
Checked By:
Scale:
Drawn By:
Project Number:
HOPE HOUSE
243 SEARS STREETBUFFALO, NY 14212
CONSTRUCTION DOCUMENTSSHARS 20166065
DATE
THE REGISTERED PROFESSIONALCERTIFIES THAT THIS PROJECT HASBEEN DESIGNED BY ME, OR UNDERMY SUPERVISION, INACCORDANCE WITH: THEBUILDING CODE OF NEW YORKSTATE AND THE ENERGYCONSERVATION CODE OF NEWYORK STATE AND APPLICABLEFEDERAL LAWS ANDREGULATIONS AND TO THE BESTOF MY KNOWLEDGE AND BELIEF,THESE CONSTRUCTIONDOCUMENTS ARE INCONFORMANCE THEREWITH.
THESE DOCUMENTS, SUBMITTED FOR THE SPECIFIC PROJECT NAMELY THERENOVATION OF SCHOOL # 57 243 SEARS STREET IN BUFFALO, NY 14212AN INSTRUMENT OF SERVICE AND ARE NOT TO BE ALTERED, COPIED, ORUSED FOR ANY OTHER PROJECT WITHOUT THE EXPRESSED WRITTENPERMISSION OF FLYNN BATTAGLIA ARCHITECTS, PC. IT IS A VIOLATIONOF THE LAW FOR ANY PERSON, UNLESS UNDER THE DIRECTION OF ALICENSED ARCHITECT OR ENGINEER, TO ALTER ANY ITEMS IN THESEDOCUMENTS IN ANY WAY. IF ANY ITEM IS ALTERED, THE ALTERINGARCHITECT/ENGINEER SHALL AFFIX HIS/HER SEAL ALONG WITH THENOTATION "ALTERED BY" FOLLOWED BY HIS/HER SIGNATURE AND THEDATE OF SUCH ALTERATION, AND A SPECIFIC DESCRIPTION OF THEALTERATION. COPYRIGHT 2017 FLYNN BATTAGLIA ARCHITECTS, PC, ALLRIGHTS RESERVED.
617 Main Street, Suite S401
Buffalo, New York 14203-1400Telephone (716) 854-2424Fax (716) 854-2428
N
ov 0
3,2
01
7 - 1
1:1
9a
m
C:\U
se
rs\m
att.sh
an
k\a
pp
da
ta
\lo
ca
l\te
mp
\A
cP
ub
lish
_2
02
0\F
P1
-0
0.d
wg
OCTOBER 10, 2017
STUDIO T3
BUFFALO ENGINEERING, P.C.MEP ENGINEER
CIVIL ENGINEER
SIRACUSE ENGINEERS, P.C.STRUCTURAL
ENGINEER
MS ANALYTICALENVIRONMENTAL
ENGINEER
N
BUFFALO ENGINEERING, P.C.
4245 UNION RD. BUFFALO, NY 14225[P] 716.633.5300 [F] 716.633.5598
WWW.BUFFALOENGINEERING.COM
MECHANICAL/ELECTRICAL ENGINEERS
B.E. Project No. 217054
REVISION 1 NOVEMBER 3, 2017
00254.00 As Indicated
MRS DGI
BASEMENT FIRE PROTECTION PLAN
FP1-00
AutoCAD SHX Text
REFER TO SITE PLAN FOR CONTINUATION
AutoCAD SHX Text
INSPECTORS TEST
AutoCAD SHX Text
BFP-1
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
5
AutoCAD SHX Text
7
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
2
AutoCAD SHX Text
9
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
BASEMENT FIRE PROTECTION PLAN
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
FP1-00
AutoCAD SHX Text
1
AutoCAD SHX Text
DRAWING NOTES : : 1.PROVIDE COMMERCIAL HORIZONTAL SIDE WALL SPRINKLER UNDER STAIRS IN STORAGE AREA. PROVIDE COMMERCIAL HORIZONTAL SIDE WALL SPRINKLER UNDER STAIRS IN STORAGE AREA. 2.PROVIDE 4" FP PIPING TFA. PROVIDE 4" FP PIPING TFA. 3.PROVIDE 2" DRAIN. PROVIDE 2" DRAIN. 4.PROVIDE ZONE CONTROL BOX. SEE 1/FP0-02 FOR DETAIL. PROVIDE ZONE CONTROL BOX. SEE 1/FP0-02 FOR DETAIL. 5.PROVIDE SPLASH BLOCK. SEE 6/FP0-02 FOR DETAIL. PROVIDE SPLASH BLOCK. SEE 6/FP0-02 FOR DETAIL. 6.PROVIDE UPRIGHT SPRINKLER BELOW DUCTWORK. PROVIDE UPRIGHT SPRINKLER BELOW DUCTWORK. 7.PROVIDE 2" DRAIN FFA. PROVIDE 2" DRAIN FFA. 8.PROVIDE FIRE DEPARTMENT CONNECTION. SEE 1/FP0-03 FOR DETAIL. PROVIDE FIRE DEPARTMENT CONNECTION. SEE 1/FP0-03 FOR DETAIL. 9.COORDINATE FINAL LOCATION OF INSPECTORS TEST WITH ARCHITECT PRIOR TO INSTALLATION.COORDINATE FINAL LOCATION OF INSPECTORS TEST WITH ARCHITECT PRIOR TO INSTALLATION.
AutoCAD SHX Text
#
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
GENERAL NOTES: A.CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CORE DRILLS AS REQUIRED. B.CONTRACTOR SHALL PROVIDE FIRE STOPPING AS CONTRACTOR SHALL PROVIDE FIRE STOPPING AS REQUIRED. C.CONTRACTOR SHALL COORDINATE SPRINKLERS WITH CONTRACTOR SHALL COORDINATE SPRINKLERS WITH CEILING TYPE PRIOR TO INSTALLATION. D.CONTRACTOR SHALL COORDINATE SPRINKLER CONTRACTOR SHALL COORDINATE SPRINKLER LOCATIONS WITH ALL TRADES PRIOR TO INSTALLATION. E.SPRINKLERS LOCATED IN ACOUSTICAL CEILING TILES SPRINKLERS LOCATED IN ACOUSTICAL CEILING TILES SHALL BE CENTERED WITHIN THE TILE AND GRID.
STO.
gov
Drawing Title
Drawing Number
NOTES & REVISIONS:
DRAWING ISSUED:
Checked By:
Scale:
Drawn By:
Project Number:
HOPE HOUSE
243 SEARS STREETBUFFALO, NY 14212
CONSTRUCTION DOCUMENTSSHARS 20166065
DATE
THE REGISTERED PROFESSIONALCERTIFIES THAT THIS PROJECT HASBEEN DESIGNED BY ME, OR UNDERMY SUPERVISION, INACCORDANCE WITH: THEBUILDING CODE OF NEW YORKSTATE AND THE ENERGYCONSERVATION CODE OF NEWYORK STATE AND APPLICABLEFEDERAL LAWS ANDREGULATIONS AND TO THE BESTOF MY KNOWLEDGE AND BELIEF,THESE CONSTRUCTIONDOCUMENTS ARE INCONFORMANCE THEREWITH.
THESE DOCUMENTS, SUBMITTED FOR THE SPECIFIC PROJECT NAMELY THERENOVATION OF SCHOOL # 57 243 SEARS STREET IN BUFFALO, NY 14212AN INSTRUMENT OF SERVICE AND ARE NOT TO BE ALTERED, COPIED, ORUSED FOR ANY OTHER PROJECT WITHOUT THE EXPRESSED WRITTENPERMISSION OF FLYNN BATTAGLIA ARCHITECTS, PC. IT IS A VIOLATIONOF THE LAW FOR ANY PERSON, UNLESS UNDER THE DIRECTION OF ALICENSED ARCHITECT OR ENGINEER, TO ALTER ANY ITEMS IN THESEDOCUMENTS IN ANY WAY. IF ANY ITEM IS ALTERED, THE ALTERINGARCHITECT/ENGINEER SHALL AFFIX HIS/HER SEAL ALONG WITH THENOTATION "ALTERED BY" FOLLOWED BY HIS/HER SIGNATURE AND THEDATE OF SUCH ALTERATION, AND A SPECIFIC DESCRIPTION OF THEALTERATION. COPYRIGHT 2017 FLYNN BATTAGLIA ARCHITECTS, PC, ALLRIGHTS RESERVED.
617 Main Street, Suite S401
Buffalo, New York 14203-1400Telephone (716) 854-2424Fax (716) 854-2428
N
ov 0
3,2
01
7 - 1
1:1
9a
m
C:\U
se
rs\m
att.sh
an
k\a
pp
da
ta
\lo
ca
l\te
mp
\A
cP
ub
lish
_2
02
0\F
P1
-0
1.d
wg
OCTOBER 10, 2017
STUDIO T3
BUFFALO ENGINEERING, P.C.MEP ENGINEER
CIVIL ENGINEER
SIRACUSE ENGINEERS, P.C.STRUCTURAL
ENGINEER
MS ANALYTICALENVIRONMENTAL
ENGINEER
N
BUFFALO ENGINEERING, P.C.
4245 UNION RD. BUFFALO, NY 14225[P] 716.633.5300 [F] 716.633.5598
WWW.BUFFALOENGINEERING.COM
MECHANICAL/ELECTRICAL ENGINEERS
B.E. Project No. 217054
REVISION 1 NOVEMBER 3, 2017
00254.00 As Indicated
MRS DGI
FIRST FLOOR FIRE PROTECTION PLAN
FP1-01
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
FIRST FLOOR FIRE PROTECTION PLAN
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
DP1-01
AutoCAD SHX Text
1
AutoCAD SHX Text
DRAWING NOTES : : 1.PROVIDE 4" FP PIPING TFA. PROVIDE 4" FP PIPING TFA. 2.PROVIDE 4" FP PIPING FFB. PROVIDE 4" FP PIPING FFB. 3.PROVIDE 2" DRAIN. PROVIDE 2" DRAIN. 4.PROVIDE ZONE CONTROL BOX. SEE 1/FP0-02 FOR DETAIL. PROVIDE ZONE CONTROL BOX. SEE 1/FP0-02 FOR DETAIL. 5.PROVIDE UPRIGHT SPRINKLERS IN STORAGE AREA UNDER PROVIDE UPRIGHT SPRINKLERS IN STORAGE AREA UNDER STAGE. PROVIDE HEAD GUARDS ON UPRIGHT SPRINKLERS IN STORAGE AREA UNDER STAGE. TYPICAL OF ALL SPRINKLERS UNDER STAGE. 6.PROVIDE 2" DRAIN. CONNECT TO 2" DRAIN FFA. PROVIDE 2" DRAIN. CONNECT TO 2" DRAIN FFA. 7.PROVIDE 2" DRAIN FFA. PROVIDE 2" DRAIN FFA. 8.PROVIDE SOFFIT FOR FP PIPING. IF SOFFIT EXCEEDS 8" IN PROVIDE SOFFIT FOR FP PIPING. IF SOFFIT EXCEEDS 8" IN DEPTH, PROVIDE FP COVERAGE UNDERNEATH SOFFIT. 9.PROVIDE 2-1/2 FP PIPING TFA. PROVIDE 2-1/2 FP PIPING TFA. 10.PROVIDE CORE DRILL AND EXTEND PIPING THROUGH WALL. PROVIDE CORE DRILL AND EXTEND PIPING THROUGH WALL. PROVIDE FIRE STOPPING AS REQUIRED.
AutoCAD SHX Text
#
AutoCAD SHX Text
4
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
9
AutoCAD SHX Text
5
AutoCAD SHX Text
7
AutoCAD SHX Text
1
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
GENERAL NOTES: A.CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CORE DRILLS AS REQUIRED. B.CONTRACTOR SHALL PROVIDE FIRE STOPPING AS CONTRACTOR SHALL PROVIDE FIRE STOPPING AS REQUIRED. C.CONTRACTOR SHALL COORDINATE SPRINKLERS WITH CONTRACTOR SHALL COORDINATE SPRINKLERS WITH CEILING TYPE PRIOR TO INSTALLATION. D.CONTRACTOR SHALL COORDINATE SPRINKLER CONTRACTOR SHALL COORDINATE SPRINKLER LOCATIONS WITH ALL TRADES PRIOR TO INSTALLATION. E.SPRINKLERS LOCATED IN ACOUSTICAL CEILING TILES SPRINKLERS LOCATED IN ACOUSTICAL CEILING TILES SHALL BE CENTERED WITHIN THE TILE AND GRID.
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
AutoCAD SHX Text
10
Drawing Title
Drawing Number
NOTES & REVISIONS:
DRAWING ISSUED:
Checked By:
Scale:
Drawn By:
Project Number:
HOPE HOUSE
243 SEARS STREETBUFFALO, NY 14212
CONSTRUCTION DOCUMENTSSHARS 20166065
DATE
THE REGISTERED PROFESSIONALCERTIFIES THAT THIS PROJECT HASBEEN DESIGNED BY ME, OR UNDERMY SUPERVISION, INACCORDANCE WITH: THEBUILDING CODE OF NEW YORKSTATE AND THE ENERGYCONSERVATION CODE OF NEWYORK STATE AND APPLICABLEFEDERAL LAWS ANDREGULATIONS AND TO THE BESTOF MY KNOWLEDGE AND BELIEF,THESE CONSTRUCTIONDOCUMENTS ARE INCONFORMANCE THEREWITH.
THESE DOCUMENTS, SUBMITTED FOR THE SPECIFIC PROJECT NAMELY THERENOVATION OF SCHOOL # 57 243 SEARS STREET IN BUFFALO, NY 14212AN INSTRUMENT OF SERVICE AND ARE NOT TO BE ALTERED, COPIED, ORUSED FOR ANY OTHER PROJECT WITHOUT THE EXPRESSED WRITTENPERMISSION OF FLYNN BATTAGLIA ARCHITECTS, PC. IT IS A VIOLATIONOF THE LAW FOR ANY PERSON, UNLESS UNDER THE DIRECTION OF ALICENSED ARCHITECT OR ENGINEER, TO ALTER ANY ITEMS IN THESEDOCUMENTS IN ANY WAY. IF ANY ITEM IS ALTERED, THE ALTERINGARCHITECT/ENGINEER SHALL AFFIX HIS/HER SEAL ALONG WITH THENOTATION "ALTERED BY" FOLLOWED BY HIS/HER SIGNATURE AND THEDATE OF SUCH ALTERATION, AND A SPECIFIC DESCRIPTION OF THEALTERATION. COPYRIGHT 2017 FLYNN BATTAGLIA ARCHITECTS, PC, ALLRIGHTS RESERVED.
617 Main Street, Suite S401Buffalo, New York 14203-1400
Telephone (716) 854-2424Fax (716) 854-2428
N
ov 0
3,2
01
7 - 1
1:1
9a
m
C:\U
se
rs\m
att.sh
an
k\a
pp
da
ta
\lo
ca
l\te
mp
\A
cP
ub
lish
_2
02
0\F
P1
-0
2.d
wg
OCTOBER 10, 2017
STUDIO T3
BUFFALO ENGINEERING, P.C.MEP ENGINEER
CIVIL ENGINEER
SIRACUSE ENGINEERS, P.C.STRUCTURAL
ENGINEER
MS ANALYTICALENVIRONMENTAL
ENGINEER
N
BUFFALO ENGINEERING, P.C.
4245 UNION RD. BUFFALO, NY 14225[P] 716.633.5300 [F] 716.633.5598
WWW.BUFFALOENGINEERING.COM
MECHANICAL/ELECTRICAL ENGINEERS
B.E. Project No. 217054
REVISION 1 NOVEMBER 3, 2017
00254.00 As Indicated
MRS DGI
SECOND FLOOR FIRE PROTECTION PLAN
FP1-02
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
5
AutoCAD SHX Text
4
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
SECOND FLOOR FIRE PROTECTION PLAN
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
DP1-02
AutoCAD SHX Text
1
AutoCAD SHX Text
DRAWING NOTES : : 1.PROVIDE 4" FP PIPING TFA. PROVIDE 4" FP PIPING TFA. 2.PROVIDE 4" FP PIPING FFB. PROVIDE 4" FP PIPING FFB. 3.PROVIDE 2" DRAIN. PROVIDE 2" DRAIN. 4.PROVIDE ZONE CONTROL BOX. SEE 1/FP0-02 FOR DETAIL. PROVIDE ZONE CONTROL BOX. SEE 1/FP0-02 FOR DETAIL. 5.PROVIDE 2" DRAIN. CONNECT TO 2" DRAIN FFA. PROVIDE 2" DRAIN. CONNECT TO 2" DRAIN FFA. 6.PROVIDE SOFFIT FOR FP PIPING. IF SOFFIT EXCEEDS 8" IN DEPTH, PROVIDE SOFFIT FOR FP PIPING. IF SOFFIT EXCEEDS 8" IN DEPTH, PROVIDE FP COVERAGE UNDERNEATH SOFFIT. 7.PROVIDE 2-1/2" FP PIPING FFB. PROVIDE 2-1/2" FP PIPING FFB. 8.PROVIDE CORE DRILL AND EXTEND PIPING THROUGH WALL. PROVIDE CORE DRILL AND EXTEND PIPING THROUGH WALL. PROVIDE FIRE STOPPING AS REQUIRED.
AutoCAD SHX Text
#
AutoCAD SHX Text
GENERAL NOTES: A.CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CORE DRILLS AS REQUIRED. B.CONTRACTOR SHALL PROVIDE FIRE STOPPING AS CONTRACTOR SHALL PROVIDE FIRE STOPPING AS REQUIRED. C.CONTRACTOR SHALL COORDINATE SPRINKLERS WITH CONTRACTOR SHALL COORDINATE SPRINKLERS WITH CEILING TYPE PRIOR TO INSTALLATION. D.CONTRACTOR SHALL COORDINATE SPRINKLER CONTRACTOR SHALL COORDINATE SPRINKLER LOCATIONS WITH ALL TRADES PRIOR TO INSTALLATION. E.SPRINKLERS LOCATED IN ACOUSTICAL CEILING TILES SPRINKLERS LOCATED IN ACOUSTICAL CEILING TILES SHALL BE CENTERED WITHIN THE TILE AND GRID.
gov
Drawing Title
Drawing Number
NOTES & REVISIONS:
DRAWING ISSUED:
Checked By:
Scale:
Drawn By:
Project Number:
HOPE HOUSE
243 SEARS STREETBUFFALO, NY 14212
CONSTRUCTION DOCUMENTSSHARS 20166065
DATE
THE REGISTERED PROFESSIONALCERTIFIES THAT THIS PROJECT HASBEEN DESIGNED BY ME, OR UNDERMY SUPERVISION, INACCORDANCE WITH: THEBUILDING CODE OF NEW YORKSTATE AND THE ENERGYCONSERVATION CODE OF NEWYORK STATE AND APPLICABLEFEDERAL LAWS ANDREGULATIONS AND TO THE BESTOF MY KNOWLEDGE AND BELIEF,THESE CONSTRUCTIONDOCUMENTS ARE INCONFORMANCE THEREWITH.
THESE DOCUMENTS, SUBMITTED FOR THE SPECIFIC PROJECT NAMELY THERENOVATION OF SCHOOL # 57 243 SEARS STREET IN BUFFALO, NY 14212AN INSTRUMENT OF SERVICE AND ARE NOT TO BE ALTERED, COPIED, ORUSED FOR ANY OTHER PROJECT WITHOUT THE EXPRESSED WRITTENPERMISSION OF FLYNN BATTAGLIA ARCHITECTS, PC. IT IS A VIOLATIONOF THE LAW FOR ANY PERSON, UNLESS UNDER THE DIRECTION OF ALICENSED ARCHITECT OR ENGINEER, TO ALTER ANY ITEMS IN THESEDOCUMENTS IN ANY WAY. IF ANY ITEM IS ALTERED, THE ALTERINGARCHITECT/ENGINEER SHALL AFFIX HIS/HER SEAL ALONG WITH THENOTATION "ALTERED BY" FOLLOWED BY HIS/HER SIGNATURE AND THEDATE OF SUCH ALTERATION, AND A SPECIFIC DESCRIPTION OF THEALTERATION. COPYRIGHT 2017 FLYNN BATTAGLIA ARCHITECTS, PC, ALLRIGHTS RESERVED.
617 Main Street, Suite S401Buffalo, New York 14203-1400
Telephone (716) 854-2424Fax (716) 854-2428
N
ov 0
3,2
01
7 - 1
1:1
9a
m
C:\U
se
rs\m
att.sh
an
k\a
pp
da
ta
\lo
ca
l\te
mp
\A
cP
ub
lish
_2
02
0\F
P1
-0
3.d
wg
OCTOBER 10, 2017
STUDIO T3
BUFFALO ENGINEERING, P.C.MEP ENGINEER
CIVIL ENGINEER
SIRACUSE ENGINEERS, P.C.STRUCTURAL
ENGINEER
MS ANALYTICALENVIRONMENTAL
ENGINEER
N
BUFFALO ENGINEERING, P.C.
4245 UNION RD. BUFFALO, NY 14225[P] 716.633.5300 [F] 716.633.5598
WWW.BUFFALOENGINEERING.COM
MECHANICAL/ELECTRICAL ENGINEERS
B.E. Project No. 217054
REVISION 1 NOVEMBER 3, 2017
00254.00 As Indicated
MRS DGI
THIRD FLOOR FIRE PROTECTION PLAN
FP1-03
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
5
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
THIRD FLOOR FIRE PROTECTION PLAN
AutoCAD SHX Text
1/8" = 1'-0"
AutoCAD SHX Text
FP1-03
AutoCAD SHX Text
1
AutoCAD SHX Text
DRAWING NOTES : : 1.PROVIDE 3" FP PIPING TFA. PROVIDE 3" FP PIPING TFA. 2.PROVIDE 4" FP PIPING FFB. PROVIDE 4" FP PIPING FFB. 3.PROVIDE 2" DRAIN. PROVIDE 2" DRAIN. 4.PROVIDE ZONE CONTROL BOX. SEE 1/FP0-02 FOR DETAIL. PROVIDE ZONE CONTROL BOX. SEE 1/FP0-02 FOR DETAIL. 5.PROVIDE SOFFIT FOR FP PIPING. IF SOFFIT EXCEEDS 8" IN PROVIDE SOFFIT FOR FP PIPING. IF SOFFIT EXCEEDS 8" IN DEPTH, PROVIDE FP COVERAGE UNDERNEATH SOFFIT. 6.PROVIDE CORE DRILL AND EXTEND PIPING THROUGH WALL. PROVIDE CORE DRILL AND EXTEND PIPING THROUGH WALL. PROVIDE FIRE STOPPING AS REQUIRED.
AutoCAD SHX Text
#
AutoCAD SHX Text
GENERAL NOTES: A.CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL CORE DRILLS AS REQUIRED. B.CONTRACTOR SHALL PROVIDE FIRE STOPPING AS CONTRACTOR SHALL PROVIDE FIRE STOPPING AS REQUIRED. C.CONTRACTOR SHALL COORDINATE SPRINKLERS WITH CONTRACTOR SHALL COORDINATE SPRINKLERS WITH CEILING TYPE PRIOR TO INSTALLATION. D.CONTRACTOR SHALL COORDINATE SPRINKLER CONTRACTOR SHALL COORDINATE SPRINKLER LOCATIONS WITH ALL TRADES PRIOR TO INSTALLATION. E.SPRINKLERS LOCATED IN ACOUSTICAL CEILING TILES SPRINKLERS LOCATED IN ACOUSTICAL CEILING TILES SHALL BE CENTERED WITHIN THE TILE AND GRID.
Drawing Title
Drawing Number
NOTES & REVISIONS:
DRAWING ISSUED:
Checked By:
Scale:
Drawn By:
Project Number:
HOPE HOUSE
243 SEARS STREETBUFFALO, NY 14212
CONSTRUCTION DOCUMENTSSHARS 20166065
DATE
THE REGISTERED PROFESSIONALCERTIFIES THAT THIS PROJECT HASBEEN DESIGNED BY ME, OR UNDERMY SUPERVISION, INACCORDANCE WITH: THEBUILDING CODE OF NEW YORKSTATE AND THE ENERGYCONSERVATION CODE OF NEWYORK STATE AND APPLICABLEFEDERAL LAWS ANDREGULATIONS AND TO THE BESTOF MY KNOWLEDGE AND BELIEF,THESE CONSTRUCTIONDOCUMENTS ARE INCONFORMANCE THEREWITH.
THESE DOCUMENTS, SUBMITTED FOR THE SPECIFIC PROJECT NAMELY THERENOVATION OF SCHOOL # 57 243 SEARS STREET IN BUFFALO, NY 14212AN INSTRUMENT OF SERVICE AND ARE NOT TO BE ALTERED, COPIED, ORUSED FOR ANY OTHER PROJECT WITHOUT THE EXPRESSED WRITTENPERMISSION OF FLYNN BATTAGLIA ARCHITECTS, PC. IT IS A VIOLATIONOF THE LAW FOR ANY PERSON, UNLESS UNDER THE DIRECTION OF ALICENSED ARCHITECT OR ENGINEER, TO ALTER ANY ITEMS IN THESEDOCUMENTS IN ANY WAY. IF ANY ITEM IS ALTERED, THE ALTERINGARCHITECT/ENGINEER SHALL AFFIX HIS/HER SEAL ALONG WITH THENOTATION "ALTERED BY" FOLLOWED BY HIS/HER SIGNATURE AND THEDATE OF SUCH ALTERATION, AND A SPECIFIC DESCRIPTION OF THEALTERATION. COPYRIGHT 2017 FLYNN BATTAGLIA ARCHITECTS, PC, ALLRIGHTS RESERVED.
617 Main Street, Suite S401Buffalo, New York 14203-1400
Telephone (716) 854-2424Fax (716) 854-2428
N
ov 0
3,2
01
7 - 1
1:1
9a
m
F:\P
ro
je
cts\2
01
7\2
17
05
4 - H
op
e H
ou
se
\F
ire
\F
P1
-0
4.d
wg
OCTOBER 10, 2017
STUDIO T3
BUFFALO ENGINEERING, P.C.MEP ENGINEER
CIVIL ENGINEER
SIRACUSE ENGINEERS, P.C.STRUCTURAL
ENGINEER
MS ANALYTICALENVIRONMENTAL
ENGINEER
N
BUFFALO ENGINEERING, P.C.
4245 UNION RD. BUFFALO, NY 14225[P] 716.633.5300 [F] 716.633.5598
WWW.BUFFALOENGINEERING.COM
MECHANICAL/ELECTRICAL ENGINEERS
B.E. Project No. 217054
REVISION 1 NOVEMBER 3, 2017
00254.00 As Indicated
MRS DGI
ATTIC FIRE PROTECTION PLAN
FP1-04
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
DRAWING NOTES : : 1.PROVIDE 3" FP PIPING FFB. PROVIDE 3" FP PIPING FFB. 2.PROVIDE UPRIGHT SPRINKLER AT BOTTOM OF STAIRS BELOW ATTIC FLOOR. PROVIDE UPRIGHT SPRINKLER AT BOTTOM OF STAIRS BELOW ATTIC FLOOR. 3.PROVIDE UPRIGHT QUICK RESPONSE INTERMEDIATE TEMPERATURE SPRINKLER, TYPICAL FOR ATTIC.PROVIDE UPRIGHT QUICK RESPONSE INTERMEDIATE TEMPERATURE SPRINKLER, TYPICAL FOR ATTIC.
