CEMB CATALOG 2016 · CEMB® ITALY CEMB® is located in Mandello del Lario on the east shore of Lake...

PRODUCT CATALOGGarage equipment division

2016

Wheel Balancers - Tire Changers - Wheel Alignment

CEMB® USA1-678-717-1050

www.cemb-usa.com

TAB

LE O

FC

ON

TEN

TS

Wheel balancers

8 Car

11 Motorcycle

12 Truck

Wheel alignment

18 Car

19 Truck

Tire changers

14 Car

16 Motorcycle

17 Truck

About CEMB®

2 The company

3 History

4 Did you know?

5 Balancing divisions

Accessories

20 Standard accessories

23 Optional accessories

CEMB® ITALY

CEMB® is located in Mandello del Lario on the east shore of Lake Como, not far from Milan’s main airports. The Company building with the management offices as well as the technical, commercial and administrative departments, the show rooms and meeting/training rooms is set on an area of 100,000 ft².The departments for the production of industrial balancing machines and instruments for vibration analysis are also housed in the same building.A second manufacturing unit, located in an area of 125,000 ft², is involved with the batch production of wheel balancing machines for vehicle wheels, alignment units and testing lines.

The CNC machinery used by CEMB® in the production phase are the very best the market has to offer. These are machines embodying the latest technological developments, exclusively with numerical control. Using machines of this quality is the only way CEMB® can guarantee total control over the quality of the critical parts on the balancing machines. Moreover the machines tools are continually being renewed in order to achieve the continued and constant manufacturing of high precision components which has always distinguished CEMB®’s quality manufactured products.

ITALIAN HEART: all the parts influencing the quality of our wheel balancers are manufactured at CEMB® facilities through appropriate machinery. The tolerances used are the most accurate on the market. An accurate and constant balancing is maintained through time.

VDD - VIRTUAL DIRECT DRIVE:Thanks to the experience in the sectors of industrial balancing and vibration analysis CEMB® developed the new patented device called Virtual Direct Drive.With VDD the most economic wheel balancer of CEMB® range wins in speed and accuracy against any other model of the competitors!

CEMB® USA

Established in 1978, BL Systems inc / CEMB® USA is a CEMB® owned US Company located in Gainesville (Georgia) near Lake Lanier, one hour North East of Atlanta (Georgia). The name BL Systems was derived from the owner and founder’s name, Buzzi, Luigi.

CEMB® has been selling garage and industrial balancing equipment in the US since 1969. Most garage equipment in the earlier years were sold through US companies under private label. Today we still continue to sell to many US companies under private label as well as our own name. There are many end users throughout the US and Canada unaware that the manufacturer of the equipment they have been using for many years is in fact CEMB®. Currently we have a complete sales force of representatives and service centers throughout all of the US to help support our wheel service lines of wheel balancers, tire changers and wheel alignment equipment.

THE

CO

MPA

NY

BL

SYS

TEM

S, I

NC

®

THE

HIS

TOR

Y

A COMPANY, AN ENTREPRENEUR

In 1946 Luigi Buzzi designed the first balancing machine: a revolutionary solution he covered by patents. From 1946 to 1949 he built up the production of mechanical resonance type balancing machines and stroboscopic types came later. In 1952 came the first production of balancing machines for motor vehicle wheels. In 1960 he encouraged the use and construction of an R&D department for the rapidly growing field of electronics: CEMB® is the first Italian Company and the second in the world to design and manufacture wheel balancing machines.The research and the continuous technical innovation are the reasons that guarantee CEMB®’s main role in both the garage and industrial fields of balancing. CEMB® is today the only Company in the world to manufacture in both sectors of balancing equipment. Also, that gives CEMB® an evident technical and quality advantages over competitive manufacturers.

CEM

B® U

SA

CEM

B® S

hang

ai

CEM

B® H

ofm

ann®

UK

Hof

man

n® G

erm

any

CEM

B® H

eadq

uarte

r

CEMB® offers an extensive sales and technical service network in over 80 countries throughout the world. Training courses covering all problems of vibration technology, balancing and maintenance are held by qualified staff at CEMB® headquarters in Mandello del Lario (Italy) and Gainesville GA (USA) or at customer’s own premises.

A team of specialists at customers’ service.

CE

MB

® IN

TH

E W

OR

LD

DID

YO

U K

NO

W?

25 THINGS YOU DIDN’T KNOW ABOUT CEMB®

1. CEMB® is one of the largest garage wheel service equipment manufacturers in the world and they have been in the garage equipment business since 1946.

2. They have been selling equipment in the United States for more than 45 years, mostly under private label.3. In 70 years CEMB® has built wheel balancers, tire changers and wheel alignments under more than 30

different private labels all around the world, most of which are very recognizable American, Italian, French, German and Japanese brands.

4. Distributors may have sold (or are selling) CEMB® equipment and end-users may even be using a CEMB®

product and they are unaware of it.5. CEMB® in the 1970’s was the first company in the world using “OK” on its balancer when the wheel was

balanced.6. In early 80’s CEMB® built a tire changer/balancer combo named “Jolly”.7. In 1998 CEMB® invented and patented the real industrial “roller” to

measure the tire uniformity.8. CEMB® invented and patented the automatic entry of dimensions of

the wheels and the system to apply adhesive counterweight using the automatic arm.

9. CEMB® invented the fixed shaft automotive wheel balancer, which it still uses today.

10. Between 1975 and 1978 CEMB® invented and patented diagnostic systems to test suspensions and shock absorbers.

11. CEMB® is the only company in the world manufacturing rust-proof cabinet wheel balancers.

12. CEMB® is the only balancing machines manufacturer in the world with three different specialized balancing divisions.

13. CEMB® wheel alignment equipment, only recently introduced in the United States, is already a major player in that product line.

14. CEMB® is the only manufacturer in the world to make both garage and automated assembly line wheel service mounting and balancing equipment, as well as tire matching, diagnostic and tire uniformity testing machines.

15. You will find CEMB® and Hofmann® assembly line equipment throughout the world in the plants of automobile and tire manufacturing companies.

16. CEMB® balances everything in the transportation industry: bus, truck, airplane wheels and jet engine rotors to high speed train wheels and axles.

17. In the automotive industries besides wheels, tires and alignment service, they also sell equipment to OEM manufacturers to balance and mill disc brake rotors and to balance engine crankshafts, drive shafts, flywheels, brake drums, clutches, pulleys, radiator fans, electric motors and turbochargers.

18. Over 70 million brake discs per year are balanced on CEMB® balancers.19. Over 50 million wheels have come thru assembly lines using CEMB® automatic equipment to mount, inflate,

balance and tire match wheels, as well as tire uniformity and eccentricity testing.20. Over 2 million drive shafts have been balanced on CEMB® balancers.21. Over 10 million clutches have been balanced on CEMB® balancers.22. CEMB® garage wheel balancers are used by famous Italian and Korean tire manufacturers for their

Formula 1 and DTM motorsport championships.23. CEMB® USA is one of the few wheel service companies that still offer a full one year onsite labor warranty on

most of their equipment products.24. CEMB® USA is also one of the few companies that test and assemble all their equipment before shipping.25. CEMB® USA, unlike most other companies, has a live person answer their phones and either handles your

call directly or puts you in touch with someone who can.

4

CEMB® is the only company in the world manufacturing balancing equipment for 3 different divisions, with great technical advantages coming from the synergy of all those sectors.

THR

EE

BA

LAN

CIN

G

DIV

ISIO

NS Industrial balancers

division Garage equipment

division Vibration analysis

division

INDUSTRIAL BALANCING MACHINES DIVISION

CEMB® manufactures and markets a wide range of industrial balancing machines.Vertical balancers with balancing on one or two correction planes, for rotors weighing a few grams up to 3,000 kg (6,600 lbs).Horizontal balancers with joint drive or belt drive for rotors from 10 g (0.35 oz) up to 100,000 kg (220,000 lbs).

All balancing machines can incorporate devices for measuring vibrations and automatic correction of the unbalances. The mechanical structure and electronic control modules are designed to work under the most severe operation conditions and they are also suitable for large batch production.

Examples of balancing machines produced by CEMB®:• Turbochargers• Brake discs• Crankshafts• Brake drums• Clutches• Fans• Flywheels• Pulleys• Pumps• Electric motors• Rims, wheels and tires• Train and airplane wheels• Balancing machines for aircraft industry

In Worms (Germany) another company of the CEMB® group, Hofmann® Maschinen und Anlagenbau GmbH, manufactures balancers and testing machines for industrial applications:• machines for measuring tire uniformity• machines for testing rims and tires • automatic systems for mounting, inflating and balancing rims and tires in series • special machines for balancing every type of rotor

CEMB® strengthened its position in the industrial field thanks to Hofmann®’s technical experience and contacts with all the major vehicle and tire manufacturing companies, along with the manufacturing and commercial synergies, which benefits both companies.

THR

EE

BA

LAN

CIN

G

DIV

ISIO

NS

VIBRATION ANALYSIS AND PORTABLE EQUIPMENT DIVISION

CEMB® designs and manufactures a full range of equipment for vibration measuring and correction of the unbalances on rotating machines.

The instrumentation for continuous monitoring, based on microprocessors of the latest generation, allows the users to implement powerful and flexible monitoring systems, simplifying the presetting of the measuring ranges and the alarm levels.

Portable instruments allow easy and accurate solving of any vibration problem on machines during operation: vibration measuring, balancing by means of memorized programs, analysis of vibrations at the end of diagnostic, ability to print individual customer certificates.

• Multichannel vibrometers, analyzers, balancers, tachometers for vibration displacement, speed and acceleration measurement

• Vibration monitoring equipment• Multichannel modular systems for monitoring of vibration, displacement, expansion, eccentricity, speed and

temperature• Advanced systems for the protection of rotating machines• Transducers sensor for speed, acceleration, proximity,

expansion and vibration measurement• Vibration transmitters

CEMB® devotes particular attention to the after-sale technical assistance in order to assure a complete customer’s satisfaction.

CEMB® not only provides for all the support needed in the installation process of its equipment, but it also assures the presence of specialized personnel for checks of all system components, all the way to a turnkey delivery.

CEMB® can provide a full range of technical publications, containinga large number of monographies on vibrotechniques and maintenance. It is also possible to arrange for tailor-made courses at customer’s premises.At the end of each course, a certificate of attendance is issued.

THR

EE

BA

LAN

CIN

G

DIV

ISIO

NS

GARAGE EQUIPMENT DIVISION

CEMB® has specialized since 1946 in the design and production of balancing machines in a constant search of accuracy, reliability and ease of use. CEMB® offers innovative, patented solutions and the widest range of products in the world.

• Wheel Balancers for motorcycles, cars, trucks and buses complete with high precision centering adaptors of the wheels: CEMB® offers the most diverse and complete range available on the market!

The excellent performances of every CEMB® wheel balancer are the result of the special attention given to the creation of every component of the machine: all the parts influencing the quality of our balancing machines.CEMB® balancing machine components are manufactured inside the company’s factory, through the use of machineries which are expressly developed for this purpose and using the most accurate tolerances on the market.In this way CEMB® guarantees extreme accuracy of balance readings and repeatability .

• Electro-pneumatic and automatic Tire Changers.

All the CEMB® tire changers semiautomatic, automatic or leverless are characterized by a robust and compact structure. In that way we can guarantee extreme durability. These characteristics, along with high technological content, make CEMB® tire changers the ideal solution for the professional.

• Wheel Alignment for cars and trucks, based on latest technology, original and patented innovations.

• Integrated and modular systems for computerized diagnostics of motor vehicle brake and suspension units (not available in the US).

• Extremely high-tech industrial systems for mounting, inflating, matching, bead seating, optimizing, balancing, uniformity and eccentricity.All these stations are integrated in a single automated line and are in use by major worldwide vehicle and tire manufacturers.

CEMB® is the only company in the world manufacturing rust-proof cabinet wheel balancers and pneumatic locking truck wheel balancers.

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

8

Standard accessories:


• Industrial video touch screen professional wheel balancer especially designed for tire dealers• Pneumatic locking ( )• Automatic distance and diameter entry with width sonar 3D ( ) • Full-time accuracy with Static unbalance always displayed on screen• Runout sonar for wheel diagnostic ( )• Electromagnetic brake holds the wheel in position• New automatic arm to measure diameters up to 30”• LED to light the work space inside the rim• Fully automatic Spotter Laser System for best correction possible (no comebacks)• Optional printer available• Available 110VAC or 220VAC• Comes fully assembled

ER

100

Fully automatic laser wheel balancerand diagnostic center

Power requirementsBalancing speed Average cycle time Rim width capacityRim diameter capacityMax. tire diameterMax. wheel weight Shaft diameterOperating pressureShipping weight

• Fully automatic data entry 3D by means of lasers• Automatically positions the wheel at the weight placement location• LED to light the work space inside the rim• Full-time accuracy with Static unbalance always displayed on screen• Automatic complete diagnostic of rim, tire and wheel assembly• Automatic ZERO WEIGHT Lift ( )• Pneumatic locking ( )• Fully automatic Spotter Laser System for best correction possible (no comebacks)• Industrial touch screen • Full size printer• Comes fully assembled

In 6 seconds:

• Wheel balancing

• Rim runout

• Wheel runout

• Direct matching

• Tread depth

• Tire conicity

• Tire set 110VAC, 50/60 Hz, 1 ph100 rpm5 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)40” (1,016 mm)165 lbs (75 Kg)40 mm7 - 10 bar (105 - 145 psi)650 lbs (295 kg)

ER

75TD

Video diagnostic wheel balancerfor cars and light trucks


• Pneumatic locking

with electromagnetic

brake

• It proposes the optimal

placement of the wheels

on the vehicle for

maximum comfort and

safety

110VAC or 220VAC, 50/60 Hz, 1 ph100 rpm5 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)42” (1,067 mm)165 lbs (75 Kg)40 mm7-10 bar (105 - 145 psi)400 lbs (180 Kg)

C

C

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

9



ER

73TD

Video diagnostic wheel balancerfor cars and light trucks

Power requirementsBalancing speed Average cycle time Rim width capacityRim diameter capacityMax. tire diameterMax. wheel weight Shaft diameterShipping weight

• Industrial video touch screen professional wheel balancer especially designed for tire dealers• Standard locking with quick-nut• Automatic distance and diameter entry with width sonar 3D ( ) • LED to light the work space inside the rim• Full-time accuracy with Static unbalance always displayed on screen• Electromagnetic brake holds the wheel in position• New automatic arm to measure diameters up to 30”• Fully automatic Spotter Laser System for best correction possible (no comebacks)• Available 110VAC or 220VAC• Optional runout sonar for wheel diagnostic ( )• Optional printer available• Comes fully assembled

110VAC or 220VAC, 50/60 Hz, 1 ph100 rpm5 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)42” (1,067 mm)165 lbs (75 Kg)40 mm390 lbs (177 Kg)

ER

72TD

Professional wheel balancerfor cars and light trucks


• Professional digital wheel balancer especially designed for tire dealers• Standard locking with quick-nut• Automatic distance and diameter entry with width sonar 3D ( ) • LED to light the work space inside the rim• Full-time accuracy with Static unbalance always displayed on screen• Electromagnetic brake holds the wheel in position• New automatic arm to measure diameters up to 30”• Fully automatic Spotter Laser System for best correction possible (no comebacks)• Available 110VAC or 220VAC• Comes fully assembled

• LED to light the working

space inside the rim

• Perfect for very busy

shops and tire dealers

110VAC or 220VAC, 50/60 Hz, 1 ph100 rpm5 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)42” (1,067 mm)165 lbs (75 Kg)40 mm370 lbs (168 Kg)

• Static unbalance always

displayed on screen for

best accuracy

• Spotter Laser System

B

B

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

10



ER

71

Digital wheel balancerfor cars and light trucks


• Automatic distance and diameter entry 2D ( )• Optional width sonar 3D• Standard locking with quick-nut• Wide working space• Laser Line for quicker stick-on weight placement• LED to light the work space inside the rim• Electromagnetic brake holds the wheel in position• New automatic arm to measure diameters up to 30”• Direct weight location program (no repositioning of stick-on weight) ( )• Direct selection ounce or grams• Comes fully assembled

110VAC, 50/60 Hz, 1 ph100 rpm5 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)40” (1,016 mm)165 lbs (75 Kg)40 mm354 lbs (160 Kg)

EZ

9

Motorized digital automatic wheel balancer


• Space saving motorized wheel balancer• For cars and light trucks, motorcycle and scooter wheels (by means of optional accessories)• Automatic distance and diameter entry 2D ( )• Direct weight location program (no repositioning of stick-on weight) - ( )• Multi-function display • SPLIT program to hide the counterweight behind the spokes• Foot pedal brake for easy weight placement• Splash guard• Comes fully assembled

110VAC, 50/60 Hz, 1 ph100 rpm5 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)36” (914 mm)165 lbs (75 Kg)40 mm260 lbs (118 kg)

Designed for those

who require speed,

accuracy and high

quality with space

saving dimensions

• Laser line for easy

stick-on weight placement

• It measures automatically

diameters up to 30”

• Electromagnetic brake

holds the wheel in

position

B

B

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

11



EZ

29

Portable hand spin wheel balancerfor cars and light trucks


• Space saving wheel balancer with excellent technical specifications• Automatic distance and diameter entry 2D ( )• Dual voltage power supply 12VDC - 110VAC• Standard lightweight battery pack for use when power not available• Direct selection ounce or grams• Direct weight location program (no repositioning of stick-on weight) - ( )• Foot pedal brake for easy weight placement• Wheels for easy portability• Hand spin• Comes fully assembled

• Perfect for mobile service

thanks to the battery pack

• Foot pedal brake for easy

weight placement

• The perfect wheel balancer

for the operator with limited

s

pace12VDC - 110VAC 50/60 Hz100 rpm5 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)42” (1,067 mm)165 lbs (75 Kg)40 mm150 lbs (68 kg)

K22

Digital wheel balancer for motorcycle wheels


• For traditional bearing type motorcycle wheels• For rear flanged wheels (single arm) and scooter wheels with optional AGF kit• Automatic distance and diameter entry 2D ( )• Easy spinning and braking by motorized roller• Fixed shaft: the wheel runs freely on its own bearings thus reproducing the exact mounting of the wheel on the motorbike for diagnosing bearing problems• Dynamic balancing (on two correction planes) and Static balancing (one plane)• Low balancing speed• Comes fully assembled

110VAC, 50/60 Hz, 1 ph80 rpm5 s 1.5” - 20” (40 - 510 mm)10” - 24” (265 - 610 mm)28” (711 mm)66 lbs (30 Kg)15 mm220 lbs (100 Kg)

• Wheel balancer

specifically designed for

motorcycle wheels

• Static and dynamic

balancing

portable

B

A

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

12



C20

2SE

The only professional truck wheel balancer in the world with the pneumatic locking


• Pneumatic locking• Automatic distance and diameter entry 2D ( )• Powerful three-phase motor • Integrated pneumatic lift for wheels up to 550 lbs (250 Kg)• Electro-pneumatic stationary brake• 15” TFT screen• Full-time accuracy with Static unbalance always displayed• Radial runout sonar for wheel diagnostic ( )• Optimization program and SPLIT program • 51” wheel guard• Comes fully assembled

230/400VAC, 50/60 Hz, 3 ph70 rpm< 20 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)51” (1,295 mm)550 lbs (250 Kg)60 mm8 - 10 bar (115 - 145 psi)800 lbs (363 Kg)

C21

8

Professional truck wheel balancer for cars, heavy-duty trucks and buses


• Automatic distance and diameter entry 2D ( )• SPLIT program and Optimization program • Integrated pneumatic lift for wheels up to 550 lbs (250 Kg)• Electro-pneumatic stationary brake • Full-time accuracy with Static unbalance always displayed• 15” TFT screen• ALU-S function for light alloy or special shaped rims (car and truck)• Radial runout sonar for wheel diagnostic ( )• 51” wheel guard• Comes fully assembled

110VAC, 50/60 Hz, 1 ph70 rpm (truck)- 100 rpm (car)10 - 20 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)51” (1,295 mm)550 lbs (250 Kg)40 mm8 - 10 bar (115 - 145 psi)750 lbs (340 Kg)

• Pneumatic locking

• For balancing wheels in

large quanities

Radial runout sonar for

wheel diagnostic

E

DAccessory rack

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

13



C20

6

Portable hand spin truck wheel balancerfor cars, heavy-duty trucks and buses


• Portable wheel balancer with automatic distance and diameter entry 2D ( )• Dual voltage power supply 12VDC - 110VAC• Easy hand spin system requires minimum effort for spinning• Manual lifting system can easilly handle wheel up to 550 lbs (250 Kg)• SPLIT program and Optimization program• Wheels for easy portability• Battery pack for use when power not available• Comes fully assembled

12VDC - 110VAC 50/60 Hz70 rpm (truck)- 100 rpm (car)10 - 20 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)51” (1,295 mm)550 lbs (250 Kg)40 mm371 lbs (170 Kg)

C21

2

Professional truck wheel balancer for cars, heavy-duty trucks and buses


• Automatic distance and diameter entry 2D ( )• SPLIT program and Optimization program • Integrated pneumatic lift for wheels up to 550 lbs (250 Kg)• Electro-pneumatic stationary brake • Full-time accuracy with Static unbalance always displayed• ALU-S function for light alloy or special shaped rims (car and truck)• 51” wheel guard• Comes fully assembled

110VAC, 50/60 Hz, 1 ph70 rpm (truck)- 100 rpm (car)10 - 20 s 1.5” - 20” (40 - 510 mm)10” - 30” (265 - 765 mm)51” (1,295 mm)550 lbs (250 Kg)40 mm8 - 10 bar (115 - 145 psi)615 lbs (280 Kg)

• Pneumatic lift for easy

centering with airbag

effect

• Truck tire shop choice

• Particularly suitable

for the mobile service

• Reduced dimensions

and weight

• Space saving design

portable

D

D

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

14



MA

TIC75

0

Professional, super-automatic leverlesscenter post tire changer

Power requirementsRim clamping rangeMax. tire outside Max. tire widthBead breaker forceOperating pressureShipping weight

• For standard, low profile and run-flat wheels of cars and light commercial vehicles• Pneumatic wheel lock spindle with centering by cone and quick lock-ring• Double bead-breaker arm with disc • Standard equipment with Press arm to ease mounting operations of Run Flat and UHP tires• Wheel lift standard• DUAL FIT innovative mounting/dismounting wheel system built-in the operating arm. By a simple adjustment, it allows to operate in leverless mode with UHP super-low profile and Run Flat tires or in standard mode, using a traditional operating head, with soft-shoulder tires.• Two-speed rotation of the spindle by motoinverter• CEMBlast bead seating system standard • It comes standard with Universal Pattern Adaptor for reverse mounted wheels 4-5-6 holes and one two-faced cone 75mm-145mm (2.95”- 5.7”) • Comes fully assembled

220VAC, 1 ph / 2 speed 12” - 34” 1,200 mm (47”)406 mm (16”)2,710 lbs (1,230 Kg)10 bar (145 psi)1,000 lbs (453 kg)

• Ideal for low profile

and Run Flat tires

• Quick and easy to use,

with no effort for the

operator

SM

951H

PA

Professional tire changer with Smart Bladefor cars and light truck wheels

Power requirementsInside clamping rangeOutside clamping rangeMax. tire outside Max. tire widthBead breaker forceOperating pressureShipping weight

• Automatic tire changer with a tilting back post pneumatically controlled by a pedal, for conventional low profile and Run-Flat wheels of cars and light commercial vehicles• Dual clamping cylinders• Adjustable table with inflators on each clamp• Double Effect bead breaker• Bead breaker shovel with Power-Out System• Designed to operate on sport wheels with big size alloy rims, extra-low profile and Run-Flat tires up to a maximum width of 16”.• Clamping of rims from 10” to 28”• Fully adjustable bead breaker with Smart Blade System• It comes standard with Help arm and Press arm (one on each side)• Comes fully assembled

110VAC, 50/60 Hz, 1 ph13” - 28” 10” - 26”1,100 mm (43”)415 mm (16”)7,000 lbs (3,175 Kg)10 bar (145 psi)1,000 lbs (453 kg)

• Low profile tires are

no problem with

Help and Press Arm

• Double Effect bead

breaker with

Power-Out System

I

H

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

15



SM

951

Professional tire changer with Smart Bladefor cars and light truck wheels


• Automatic tire changer with a tilting back post pneumatically controlled by a pedal, for conventional low profile and Run-Flat wheels of cars and light commercial vehicles• Dual clamping cylinders• Adjustable table with inflators on each clamp• Double Effect bead breaker• Bead breaker shovel with Power-Out System• Designed to operate on sport wheels with big size alloy rims, extra-low profile and Run-Flat tires up to a maximum width of 16”.• Clamping of rims from 10” to 28”• Fully adjustable bead breaker with Smart Blade System• Optional version SM951HP2, with a combo Help/Press arm for low profile tires• Comes fully assembled

110VAC, 50/60 Hz, 1 ph13” - 28” 10” - 26”1,100 mm (43”)415 mm (16”)7,000 lbs (3,175 Kg)10 bar (145 psi)800 lbs (360 kg)

SM

915A

TI

Swing arm tire changerwith table top inflators


• Suitable for car and light commercial wheels • Clamping range 10” - 28”• Air tank in tower• Dual clamping cylinders • Semi-automatic swing arm• Inserts protect aluminum wheels• Adjustable table with inflators on each clamp• Adjustable bead breaker• Optional Press Arm and bead pressing tool for low profile tires• Optional CEMBlast bead seating system• Comes fully assembled

• With Press-arm

(optional) can handle

most of today’s wheels

• Table Top Inflators

help you seal the

bead 110VAC, 50/60 Hz, 1 ph13” - 28” 10” - 26”1,200 mm (47”)380 mm (15”)5,550 lbs (2,517 Kg)10 bar (145 psi)630 lbs (285 kg)

Smart Blade System

for quicker and easier

bead breaking

of any wheel

H

G

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

16



SM

825

Semi-automatic tire changer with swing arm• Suitable for car and light commercial vehicle • Clamping range 13” - 26”• Air tank in tower• Dual clamping cylinders • Semi-automatic swing arm• Inserts protect aluminum wheels• Inflators on each clamp• Optional Press Arm and bead pressing tool for low profile tires• Adjustable bead breaker• Comes fully assembled

SM

900+

Swing arm tire changerfor motorcycles and ATV’s

Power requirementsOutside clamping rangeMax. tire outside Max. tire widthBead breaker forceOperating pressureShipping weight

• Dual clamping cylinders• Clamping range 6” - 24”• Semi-automatic swing arm• Inserts protect aluminum wheels• Bead breaker designed for motorcycles and ATV’s• Optional Press Arm• Comes fully assembled

110VAC, 50/60 Hz, 1 ph6” - 24”1,010 mm (39”)240 mm (9.5”)5,550 lbs (2,517 Kg)10 bar (145 psi)485 lbs (220 kg)

Entry level, very sturdy

machine with minimum

overall dimensions


110VAC, 50/60 Hz, 1 ph15” - 26” 13” - 24”1,200 mm (47”)380 mm (15”)5,550 lbs (2,517 Kg)10 bar (145 psi)630 lbs (285 kg)

Designed especially

for motorcycle and ATV’s

wheels

G

F

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

17



SM

56T

Universal tire changerfor trucks and bus wheels

Power requirementsRim clamping rangeMax. tire outside Max. tire widthMax. tire weightBead breaker forceOperating pressureShipping weight

• Clamping range 14” - 46” (up to 56” with optional extensions)• Mobile control unit• Two speed motor• Bi-directional rotation• Self-centering universal wheel chuck• Comes fully assembled

220VAC, 50/60 Hz, 3 ph 14” - 46” (56” with optional extensions) 2,300 mm (90.5”)1,070 mm (42”)3,300 lbs (1,500 Kg)6,000 lbs (2,721 Kg)130 bar (1,885 psi)2,000 lbs (907 kg)

CM

27T

Universal tire changerfor trucks and bus wheels

Power requirementsRim clamping rangeMax. tire outside Max. tire widthMax. tire weightBead breaker forceOperating pressureShipping weight

• Clamping range 13” - 27”• Mobile control unit• Bi-directional rotation• Self-centering universal wheel chuck• Comes fully assembled

220VAC, 50/60 Hz, 1 ph 13” - 27” 1,600 mm (63”)780 mm (30”)3,300 lbs (1,500 Kg)4,100 lbs (1,860 Kg)130 bar (1,885 psi)1,415 lbs (640 kg)

For truck, bus and

agriculture tires,

professional truck tire

service and high volume

shops

• Suitable for both

tube and tubeless tires

• Handles wheels up to

3,300 lbs (1,500 Kg)

J

J

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

18



DW

A34

00

3D wheel alignment systemfor cars and light trucks

Computer - 23” monitor - printerSoftware and database for cars Four 4-point clamps 12”-24” with universal pins and targets Steering wheel lock and brake pedal depressor

• Measurement of all required alignment specifications• Targets with no electronics and batteries• Optional VIN barcode scanner• PC computer and storage cabinet• Windows® operating system• Brake pedal depressor and steering lock• 23” TFT monitor, printer, keyboard, mouse• Four 4-point clamps 12”- 24”* with universal L=45mm grips and targets * It does not mean rim diameter

• Complete car database with possible customization• Alignment specification history of 40+ years• Simple and user-friendly software

DW

A10

00 XL

8 camera CCD alignment systemfor cars and light trucks

Laptop computer - 23” monitor - printerSoftware and database with car and light trucks 4 car measuring heads 4 clamps + safety elastic band + 1 set of pins Steering wheel lock and brake pedal depressor

• Four wireless BT2 rechargeable alignment heads equipped with lithium ion batteries for long life, clamps and charging station standard• Optional VIN barcode scanner• Laptop computer and storage cabinet standard• Accelerometers (newest measuring technology)• Windows® based software with multiple languages• Brake pedal depressor and steering lock• 23” TFT monitor and printer• 24” wheel clamping range* (30” optional) * It does not mean rim diameter

• Power supply and USB BT2 antenna• Complete car database with possible customization• Alignment specification history of 40+ years• Spoilers no problem with our spoiler program

• 3D sensor technology

• Simple and user-friendly

software

• Wheel alignment software

and database for cars

Quick and user-friendly

thanks to its software

and featherweight

sensors.

best seller

L

N

AD

VA

NTAGES

TECHNICAL DATA

AD

VA

NTAGES

TECHNICAL DATA

19



Laptop computerSoftware and database with car and light trucks 4 car measuring heads 4 clamps + safety elastic band + 1 set of pins

8 camera CCD basic alignment systemfor cars and light trucks

• Four wireless BT2 rechargeable alignment heads equipped with lithium ion batteries for long life, clamps and charging station standard• Optional VIN barcode scanner• Laptop computer and storage cabinet• Accelerometers (newest measuring technology)• Windows® based software with multiple languages• 24” wheel clamping range* (30” optional) * It does not mean rim diameter

• Power supply and USB BT2 antenna• Complete car database with possible customization• Alignment specification histroy of 40+ years• Spoilers no problem with our spoiler program

8 camera CCD alignment systemfor heavy-duty trucks and buses

• Four wireless BT2 rechargeable alignment truck heads equipped with lithium ion batteries for long life, clamps and charging station standard• PC computer and storage cabinet• Accelerometers (newest measuring technology)• Windows® based software with multiple languages• Brake pedal depressor and steering lock• 23” TFT monitor and printer• 30” wheel clamping range* * It does not mean rim diameter

• Handles large trucks with standard accessories• Power supply and USB BT2 antenna• Complete truck database with possible customization• Alignment specification history of 30+ years• Handles up to seven truck axles

DW

A10

00 XLT

DW

A10

00 XLB

Computer - 23” monitor - printerSoftware and database with heavy-duty trucks 4 truck measuring heads 4 clamps with 30” extensions3 sets of pins (standard, truck and dually)Wheel grabber kit with 50” arm kitSteering wheel lock and brake pedal depressor

• Special heads

designed for trucks

• 30 years truck specs

database

• Simple and user

friendly software

• BT2 wireless technology

avoids any interference due

to Bluetooth devices

K

M

A

STA

ND

AR

DA

CC

ES

SO

RIE

S

20

B

C

D

E

WHEEL BALANCERS STANDARD ACCESSORIES

F

STA

ND

AR

DA

CC

ES

SO

RIE

S

21

G

H

I

J

TIRE CHANGERS STANDARD ACCESSORIES

K

STA

ND

AR

DA

CC

ES

SO

RIE

S

22

L

M

WHEEL ALIGNMENT STANDARD ACCESSORIES

x4 x4

x4 x4

x4 x16

x8

x4

x4 x4 x4 x4

x4

x4

x4

Nx2 x4x4

OP

TIO

NA

LA

CC

ES

SO

RIE

S

CEMB® offers a very wide selection of optional accessories for wheel balancers,tire changers and wheel alignment.

Here you will find a selection of the most common optional accessories.

WHEEL BALANCERS

CA

R

ACCESSORY CODE CENTER HOLE RANGE

RL CUP FOR ALLOY RIMS 41FF79255

WD + DC SPACER FOR WIDE WHEELS 41FF53532

UNIVERSAL BOLT PATTERN ADAPTOR UH20/2 41FF42048

CONE 4 40FF61043 3.5”-5.2” (89-132mm)

VL/2 TRUCK CONE 40FF52417 3.8”-7.1” (97-180mm)

8.5” SUPER CONE (USE WITH 3PC TCK) 40FF43748 7.9”-8.7” (202-221mm)

2 PIECE TRUCK CONE KIT 41FF86174 3.8”-7.1” (97-180mm)

3 PIECE TRUCK CONE KIT 41FF53550 3.8”-7.1” (97-180mm)

STUD ADAPTOR SR-USA 41FF56189

STUD ADAPTOR SR-USA SE2 (Pneumatic locking) 41FF56193

WBL81 WHEEL LIFT 46FL85170-KIT

TRU

CK

STAR ADAPTOR KIT SR215/2 41FF67879

CONE 5 (for european trucks) 40FF43747 11” (281mm)

ACCESSORY RACK 41FF03151

DAYTON ADAPTOR 20” – 22.5” 94FF37124

DAYTON ADAPTOR 20” – 24.5” 94FF37123

MO

TOR

CYC

LE

AF12 FOR HONDA 940013270 0.5”-1.4” (12-35mm)

AF19 FOR HARLEY DAVIDSON 41FF86295 0.7”-1.4” (19-35mm)

HARLEY DAVIDSON SHAFT EXTENSION (15mm) 04C220001

KAWASAKI-SUZUKI SHAFT EXTENSION (15mm) 04MC00001

UNIVERSAL MOTORCYCLE ADAPTOR RMC20 41FF87401 0.6”-2.7” (15-68mm)

TIRE CHANGERS

CA

R

ACCESSORY CODE

NYLON MOUNTING HEAD (w/hardware) 2008402

LOW PROFILE MOUNTING HEAD 2014250

ALLOY RIM KIT 9212806-1

BEAD BREAKER COVER 3013240

BEAD PRESSING TOOL 9208633

DROP CENTER TOOL 101159

MOTORCYCLE CLAMPS 9235082

4” EXTENSION CLAMPS 9214081

NYLON QUICK UNION KIT 9208996

TRU

CK

JAW PROTECTIONS 9234826

CM27T TUBELESS ROLLER 9218165

SM56T TUBELESS ROLLER 9299274

BEAD LIFTING GUIDE LEVER 9299269

ALLOY RIM PLIERS 9299271

56” EXTENSIONS 9235047

SCREW CLAMPS 9299273

For a complete list of accessories, compatibility and more information visit our websiteWWW.CEMB-USA.COM

WHEEL ALIGNMENT ACCESSORY CODE DWA1000XLB DWA1000XL DWA1000XLT DWA3400

STEERING WHEEL HOLDER 74A010478 O ● ● ●

BRAKE PEDAL DEPRESSOR 74A010479 O ● ● ●

DUALLY WHEEL PINS 46DWA7510 O O ● O

SELF-CENTERING CLAMPS 74A000942 O O O O

CLAMP EXTENSION UP TO 30” 46DW75803 O O ● O

DROP DOWN KIT 46DW89395 O O O -

40” ARM KIT 46DW76312 O O O O

50” ARM KIT 46DW91042 O O ● O

BACKUP CABLE KIT 86SB85932-4 O O O -

CAR TURNPLATES 1300025140P O O - O

CAR REAR SLIP PLATES 1300020407 O O - O

TRUCK TURNPLATES 130002524 O O O -

TRUCK REAR GREASE PLATES 13000DB3030 O O O -

WHEEL GRABBER KIT 46DW75331-40 O O ● -

24" HIGH WHEEL STANDS 13000DB24 O O - -

WHEEL STAND ROLLER KIT 13000DB24W O O - -

DUST COVER 397000778 O O O O

CEMB WHEEL ALIGNMENT BANNER BANNER-WA O O O O

● standard O optional - not available

23

NO

TES

24

NO

TES

www.cemb-usa.com

MADE IN ITALYGarage equipment division

CEMB® USA / BL Systems, IncGarage equipment division2873 Ramsey RoadGainesville, GA 30501 - USAPhone +1 (678) 717-1050Fax +1 (678) [email protected]

US

GA

R16

-3.5

Because of continuing technological advancements, specifications, models and options are subject to change without notice.

DISTRIBUTED BY

Date post:	25-Sep-2020
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

CEMB CATALOG 2016 · CEMB® ITALY CEMB® is located in Mandello del Lario on the east shore of Lake...

Documents