+ All Categories
Home > Documents > CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Date post: 17-Dec-2015
Category:
Upload: clinton-elwin-fowler
View: 217 times
Download: 3 times
Share this document with a friend
Popular Tags:
35
Transcript
Page 1: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.
Page 2: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

CEMENT

• Prepared by

• M Sohail saleh

• M Anees

• M Zahid Ali

• Sajjad Shukar

• Abbas Shukar

Page 3: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

INTRODUCTIONThe term "cement" originates from the Latin word "Caementum", which signifies chopped stone.

Definition: “Cement is a crystalline compound of calcium silicates and other calcium compounds having hydraulic properties” .

Page 4: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

History Lime and clay have been used as cementing material on constructions through many centuries.

Romans are commonly given the credit for the development of hydraulic cement, the most significant incorporation of the Roman’s was the use of pozzolan-lime cement by mixing volcanic ash with lime.

In 1824 Joseph Aspdin from England invented the Portland cement

Page 5: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

WHAT IS CEMENT????

Binding material.

Composite material.

Material with adhesive and cohesive properties.

Hydraulic properties.

Page 6: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Chemical composition

Tricalcium Silicate (50%)

Dicalcium Silicate (25%)

Tricalcium Aluminate (10%)

Tetracalcium Aluminoferrite (10%)

Gypsum (5%)

Page 7: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

•  

RAW MATERIALS•  Main constituents of cement include:• Lime• Alumina • Iron• Laterite•  These constituents are obtained• from following raw materials:• Lime stone• Clay • Shale• Gypsum• iron ore• Slag / Fire Clay

• DO YOU KNOW ?

1 ton of Portland cement required 1,6 tons of raw materials

Page 8: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Types of Cement

2 types of cement normally used in building industry are as follows:

a) Hydraulic Cement

b) Nonhydraulic Cement

Page 9: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Hydraulic Cement

Cements are considered hydraulic because of their ability to set and harden under or with excess water through the hydration of the cement’s chemical compounds or minerals

Page 10: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Non-hydraulic Cement

It cannot harden while in contact with water, as opposed to hydraulic cement.

It is created using materials such as non-hydraulic lime and gypsum plasters etc. which has liquid properties. After non-hydraulic cement is utilized in construction, it must be kept dry in order to gain strength and hold the structure.

Page 11: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Commonly used Types of cement

• 1 Ordinary Portland Cement (OPC)

• 2 Sulphate Resisting portland Cement (SRPC)

• 3 Rapid hardening cement

• 4 White Cement etc.

Page 12: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Ordinary Portland Cement

Artificial cement Made by the mixing clinker with gypsum in a 95:5 ratio.

Additional, specific properties can be enhanced by altering the cement-making process or the size of the particles and so producing different cements.

Page 13: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

White cement

• specially selected raw materials, usually pure chalk and white clay containing very small quantities of iron oxides and manganese oxides.

• White cement is frequently chosen by architects for use in coloured concretes that will be exposed, inside or outside buildings, to the public's gaze.

Page 14: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Rapid Hardening Portland Cements

• The average particle size is smaller

• they gain strength more quickly than do opc.

• They generate more heat in the early stages and can be useful in cold weather concreting.

Page 15: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Uses of R.H.C.

• In pre-fabricated concrete construction.

• Where formwork is required to be removed early for reuse.

• Road repair works.

• In cold weather concrete where the rapid rate of development of strength reduces the vulnerability of concrete to the frost damage.

Page 16: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Sulfate-Resisting Cements

• SRPC contain’s a high content of iron oxide in order to limit the amount of the mineral phase (C3A)

• increase its sulfate resistance.

• SRPC is normally a low alkali cement which benefits concrete in resisting the alkali silica reaction (ASR)

Page 17: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Uses of S.R.C.

• Concrete to be used in marine condition;• Concrete to be used in foundation and

basement, where soil is infested with sulphates;• Concrete used for fabrication of pipes which

are likely to be buried in marshy region or sulphate bearing soils;

• Concrete to be used in the construction of sewage treatment works.

Page 18: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Production of Cement

Page 19: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Consumption of OPC

Page 20: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Physical Properties of Portland Cements

• Fineness,

• Soundness

• Consistency

• Setting time

• Strength

• Heat of hydration

Page 21: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Fineness of Cement Rate of hydration increases with fineness, leads

to high strengths and heat generation. • . Finer particles will be more completely hydrated. • Increasing fineness decreases the amount of bleeding

but also requires more water for workability which can result in an increase in dry shrinkage.

Page 22: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Soundness

• Soundness is the ability of a hardened paste to retain its volume after setting.

• A cement is said to be unsound if it is subjected to delayed destructive expansion.

• Unsoundness of cement is due to presence of excessive amount of hard-burned free lime or magnesia

Page 23: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

consistency

• It refers to the relative mobility of a freshly mixed cement paste

• For normal consistency of cement the maimum amount of water to be added is 30%

• The plunger of vicatt’s appratus(10mm diameter) shuold penetrate 10mm

Page 24: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Setting, and Hardening

- When cement is mixed with sufficient water, it loses its plasticity and slowly forms into a hard rock-type material; this whole process is called setting.

- Gypsum retards the setting process

- Hot water and calcium chloride used to accelerate the setting process.

Page 25: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Initial setting

• Time taken by the paste to stiffen to such an extent the vicatt’s needle not penetrate through the paste 25 mm

• Measured by Vicatt’s apparatust

Page 26: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Final setting

• Time after which the vicatt’s needle doesn’t sink visibly nad leave impression on paste

• Measured by Vicatt’s apparatus

Page 27: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Heat of Hydration• Cement + H2O = Calcium Silicate Hydrate (C-S-H)

+Ca (OH)2 +H2O

•  Early age cracking, due to thermal and shrinkage stress.

• This is a concern about high performance concrete subjected to higher temperatures

• Most concrete is made with a water to cement mass ratio ranging from 0.45 to 0.65

Page 28: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Water Cement Ratio Water demand can decrease with increasing

limestone content. Increase with fineness of cement. The proportions of gypsum, anhydrite. Dependent on the temperature. Soluble sulphate and C3A reactivity changes.

Page 29: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Disadvantages

• Limits on flexibility• deficiency of

natural resources

• Production of CO2

• Increasing temperature of earth

Page 30: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

CO2 emission in cement production

• Calcination 540kg 55%

• Burning 340kg 35%

• Power 90kg 10%

Total 970kg CO2 / ton OPC

For simplicity 1 ton cement 1 ton CO2 emission

Page 31: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Time Series Plot for Monthly CO2 in the Atmosphere 1965-2004

Month

Atm

osph

eric

CO

2 C

once

ntra

tion

0 100 200 300 400

320

330

340

350

360

370

380

Page 32: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Uses Of Portland Cement• Main use is in the fabrication of concrete and mortars• Modern uses

Building (floors, beams, columns, roofing, piles, bricks, mortar, panels, plaster)

Transport (roads, pathways, crossings, bridges, viaducts, tunnels, parking, etc.)

Water (pipes, drains, canals, dams, tanks, pools.)

Civil (piers, docks, retaining walls, silos, warehousing, poles, pylons, fencing)

Agriculture (processing, housing, irrigation)

fire-proof material

Page 33: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

Storage

• Cement is moisture-sensitive material; if kept dry it will retain its quality indefinitely.

• When exposed to moisture, cement will set more slowly and will have less strength compared to cement that kept dray.

• At the time of use cement should be free-flowing and free of lumps.

Page 34: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.
Page 35: CEMENT Prepared by M Sohail saleh M Anees M Zahid Ali Sajjad Shukar Abbas Shukar.

THANK YOU


Recommended