CENTRIFUGALPUMPS
JUN_
2018
IT IS HEREBY CERTIFIED THAT THE QUALITY MANAGEMENT SYSTEM OF
IAF:29
29798/13/S
FLUID GLOBAL SOLUTIONS S.R.L.
VIA XXV APRILE SNC C3, LOC. PEDEMONTE 19021 Arcola (SP) ITALIA
VIA XXV APRILE SNC C3, LOC. PEDEMONTE 19021 Arcola (SP) ITALIA
SUPPLY AND MAINTENANCE OF ROTATING MACHINERY AND SPARE PARTS
FORNITURA E MANUTENZIONE DI MACCHINE ROTATIVE E PARTI DI RICAMBIO.
Per informazioni sulla validitàdel certificato, visitare il sito
www.rina.org
For information concerningvalidity of the certificate, you
can visit the sitewww.rina.org
CERTIFICATE No.
CERTIFICATO N.
SI CERTIFICA CHE IL SISTEMA DI GESTIONE PER LA QUALITÀ DI
PER I SEGUENTI CAMPI DI ATTIVITÀ / FOR THE FOLLOWING FIELD(S) OF ACTIVITIES
NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIONAL UNITS
L'uso e la validità del presente certificato sono soggetti al rispetto del documento RINA: Regolamento per la Certificazione di Sistemi di Gestione per la Qualità
La validità del presente certificato è subordinata a sorveglianza periodica annuale / semestrale ed al riesame completo del sistema di gestione con periodicità triennale
The validity of this certificate is dependent on an annual / six monthly audit and on a complete review, every three years, of the management system
È CONFORME ALLA NORMA / IS IN COMPLIANCE WITH THE STANDARD
Per i requisiti della norma nonapplicabili al campo di applicazione
del sistema di gestionedell'organizzazione, riferirsi alle
informazioni documentate relative.
Reference is to be made to therelevant documented information
for the requirements of thestandard that cannot be applied to
the Organization's managementsystem scope
ISO 9001:2015
The use and validity of this certificate are subject to compliance with the RINA document : Rules for the certification of Quality Management Systems
11.11.2013
07.02.2018
CISQ è la Federazione Italiana di Organismi diCertificazione dei sistemi di gestione aziendale
CISQ is the Italian Federation ofmanagement system Certification Bodies
Prima emissioneFirst Issue
Data revisioneRevision date
RINA Services S.p.A.
Data scadenzaExpiry Date 06.11.2019
Daniela Asaro
Manager, Genova Certification
Via Corsica 12 - 16128 Genova Italy
Membro degli Accordi di MutuoRiconoscimento EA, IAF e ILAC
Signatory of EA, IAF and ILAC MutualRecognition Agreements
SGQ N° 002 A SSI N° 001 GSGA N° 002 D DAP N° 001 HPRD N° 002 B PRS N° 066 CSCR N° 003 F LAB N° 0832SGE N° 008 M ISP N° 069EITX N° 002 L GHG N° 002 OEMAS N° 014 P
+39 0187 1953245Via XXV Aprile , 19021 Arcola - La Spezia ITALY
www.fgsolutions.eu
Fluid Global Solutions Srl
We are specialized in the supply of pumps and spare parts, and we like to think that we take our job more seriously than anyone else!
Customer satisfaction is the most important objective of our business, and we always do our best to satisfy customers, trying to make our service a really exhaustive experience.
We offer a range of standard pumps to be used in all fields, as well as specific solutions for the naval sector, which is our long-standing reference sector.
The dynamism and continuous development of our business enable us to always find new solutions and remain at the customer’s disposal with tailor-made proposals.
Siamo specializzati nella fornitura di pompe e parti di ricambio e ci piace pensare che prendiamo il nostro lavoro più seriamente di chiunque altro!
La soddisfazione del cliente è l’obiettivo più importante della nostra attività e facciamo sempre del nostro meglio per accontentarlo cercando di rendere il nostro servizio un’esperienza esauriente.
Offriamo una gamma di pompe standard impiegabili in tutti gli ambiti oltre a soluzioni specifiche per il navale, che è il nostro settore di riferimento storico.
Il continuo sviluppo della nostra attività ci permette di trovare sempre soluzioni nuove e di metterci a disposizione del cliente con proposte specifiche per lui.
CENTRIFUGAL PUMPS ACCORDING TO EN733
Centrifugal pump type, end-suction single volute casing meeting EN733 ,
close impeller, single flow and axial inlet.
APPLICATIONS: feed water, sea water, heating and cooling plants,
aqueducts, water supply, chemical and petrochemical products, fire-
fighting systems.
VERSIONS: 2 or 4-pole version and self-priming version also available.
The pump can also be supplied coupled to a diesel or hydraulic engine.
AVAILABLE MATERIALS: cast iron, marine bronze, stainless steel AISI 316
SIZE : from DN 25 up to DN150
MAXIMUM FLOW RATE 675 m3/h
MAXIMUM HEAD 129 m
MAXIMUM POWER 90 Kw
MULTI-STAGE HORIZONTAL AND VERTICAL PUMPS
One of the most complete product ranges in the sector, with over 160
different versions available. For applications where high pressure is
required, such as lifting, refrigeration , heating and plants, washing systems
and boilers. Low noise and high resistance to wear, thanks in part to the
oversized ball bearings. This pump can also be coupled to diesel engines
with SAE3 connection. Soft shaft seal as standard, various types of
mechanical seal also possible.
VERSIONS: 2 or 4-pole version and diesel-motor version also available.
AVAILABLE MATERIALS: cast iron, stainless steel, bronze and DUPLEX.
SIZE : from DN25 up to DN200
MAXIMUM FLOW RATE : 850 m3/h
MAXIMUM HEAD : 642 m
MAXIMUM POWER : 710 kW
MULTI-CELLULAR VERTICAL AND HORIZONTAL PUMPS
Compact, multi-stage vertical pumps, suitable for lifting plants with or
without autoclave, irrigation and washing systems and all other applications
where high pressure is required. These pumps are configured with a
bearing designed to support the axial thrust of the pump and allow coupling
to any other standardised motor. Dual wear ring and bushes to guarantee
maximum reliability.Available the close-coupled version as well, with
reduced overall dimensions and reduced costs. VERSIONS: 2 or 4-pole
version
AVAILABLE MATERIALS: cast iron, stainless steel.
SIZE : from DN32 up to DN65
MAXIMUM FLOW RATE 110 m3/h
MAXIMUM HEAD 394 m
MAXIMUM POWER 55 Kw
SIDE CHANNEL PUMPS
Self-priming multistage pumps with multibladed impellers. They are used
for seawaters automatic system with hydrofore thank, water supply, petrol
and light oil.
AVAILABLE MATERIALS: cast iron, stainless steel, bronze
SIZE : from DN20 up to DN65
MAXIMUM FLOW RATE : 40 m3/h
MAXIMUM HEAD : 300 m
MAXIMUM HEAT : 160°c
VERTICAL CENTRIFUGAL IN-LINE PUMPS
Centrifugal pump type with volute casing, vertical construction,single stage,
close impeller, single flow, in line flanges.
APPLICATIONS: feed water, sea water, heating ad cooling plants,
aqueducts, water supply, chemical and petrochemical products, fire-
fighting systems.
VERSIONS: 2 or 4-pole version and self-priming version also available.
AVAILABLE MATERIALS: cast iron, marine bronze, stainless steel AISI 316
SIZE : from DN 25 up to DN250
MAXIMUM FLOW RATE 3500 m3/h
MAXIMUM HEAD 150 m
HORIZONTAL CENTRIFUGAL PUMPS ACCORDING TO iso 2858 - 5199
Horizontal construction, single stage, close impeller, single flow and axial
inlet.
APPLICATIONS:.Thermal oil exhaust gas boiler, petrochemical products
VERSIONS: API Plan with heat exchanger
AVAILABLE MATERIALS: cast iron, marine bronze, stainless steel
MAXIMUM FLOW RATE 400 m3/h
MAXIMUM HEAD 150 m
SIZE: From DN 25 up to DN 150
CENTRIFUGAL PUMPS MULTISTAGES PUMPS