Cerbo PharmaCeutiCal PaCkaging
2
nolato Cerbo – Partner for life Nolato Cerbo is part of Nolato Medical, a leading, global partner in polymer products and subsystems to customers in medical technology and pharmaceuticals.
Nolato Cerbo is specialised in the development and manufacture of primary plastic packaging for the pharmaceutical and food-supplements industry. With our leading trademark Cerbo we offer a complete standard range of both caps and containers, where user-friendliness and safety are considered equally important. Our in-house mould-shop and long, far-reaching experience also enable us to develop a unique product to match our customers’ brands.
The customer’s needs and expectations are in our focus throughout the whole process from product development and production to delivery and customer service. Our goal is to exceed those expectations by combining innovation, dedication and reliability, with the aim of being the customer’s preferred partner.
innovation and flexibilityNolato Cerbo possesses extensive expertise in the injection blow moulding and injection moulding technologies. By combining this knowledge with a high level of dedication and creativity we strive to develop and produce innovative and intelligent packaging solutions that are one step ahead.
At Nolato Cerbo we value flexibility highly and continuously strive to shorten our lead-times, with our customers’ short-term and long-term needs in focus. We believe in building reliable, long-term relations with our customers where we emphasise the importance of delivering a quality product on time.
2
3
Quality and hygiene It is our policy that all the products and services from Nolato Cerbo must meet the demands and expectations of our customers. Nolato Cerbo is certified in accordance with ISO 9001 and the requirement for Good Manufacturing Practice is being met within our manufacturing procedures. Nolato Cerbo is the first company outside the United Kingdom to be granted PS 9000 certification. This is a code of practice for suppliers of packaging materials to the British pharmaceutical industry. The standard is the basis for the international standard ISO-15378 (F-DIS version).
Production at Nolato Cerbo, highly automated with robotic production cells, is carried out under strict observation of hygiene requirements to prevent product contamination. Air cleanliness is controlled on a regular basis and our average air cleanliness is within the specifications for ISO class 8 clean zone, according to ISO-14644-1:1999. We operate vision control systems throughout the production process in order to detect any dimensional or visual imperfections.
Documentation Nolato Cerbo has full batch documentation where traceability of products and raw material are part of our normal procedures. The batch documentation is retained for 6 years. All our products are listed in a Type III Drug Master File, DMF no 18790.
environmental care Together with quality and hygiene, environmental care is one of Nolato Cerbo’s corporate values. We are certified in accordance with ISO 14001 and strive for continuous improvements in our environmental performance. Our packaging is recyclable and based on mono-material with the lowest possible use of resources. Our care for the environment is pursued throughout the logistics chain, our continuous aim being to limit the impact on our surroundings.
4
Cerbo ClassiC 200 mlart no 112867
Cerbo ClassiC350 mlart no 112877
Cerbo ClassiC400 mlart no 112869
Cerbo ClassiC600 mlart no 112878
Cerbo ClassiC275 mlart no 112868
Cerbo ClassiC
Cerbo ClassiC 40 ml art no 112862
Cerbo ClassiC 50 ml art no 112863
Cerbo ClassiC75 mlart no 112864
Cerbo ClassiC110 mlart no 112865
Cerbo ClassiC150 mlart no 112866
48.0
( incl 112820) 59 .9( incl 112720) 67 .8( incl 112940) 64 .4
( incl 112830) 78 .4( incl 112730) 86 .2( incl 112950) 84 .0
( incl 112830) 95 .2( incl 112730) 103.0( incl 112950) 100.8
( incl 112830) 135.7( incl 112730) 143.5( incl 112950) 141.3
( incl 112830) 161.7( incl 112730) 169.5( incl 112950) 167.3
( incl 112820) 51 .2( incl 112720) 59 .1( incl 112940) 55 .7
( incl 112820) 78 .7( incl 112720) 86 .6( incl 112940) 83 .2
( incl 112830) 100.2( incl 112730) 108.0( incl 112950) 105.8
( incl 112830) 117.2( incl 112730) 125.0( incl 112950) 122.8
( incl 112830) 169.7( incl 112730) 177.5( incl 112950) 175.3
56.7 75.5 75.2 97.0 92.0 114.0 132.5 166.5 158.5mm
art no 112820
art no 112940
art no 112720
art no 112830
art no 112950
art no 112730
Containers- Push-on system - narrow neck design- FDa registered, DmF type iii, DmF no 18790- injection blow moulding- material: hDPe
43.4
26.5
33.3
27.0
43.4 43.4 51.7 51.7 64.0 64.0 64.0 64.0 76.7
26.5
33.3
34.0
26.5 34.9 34.9 34.9 34.9 34.9 34.9 34.9
33.3 41.0 41.0 41.0 41.0 41.0 41.0 41.0
120.0125.091.085.060.070.050.052.0
Dimensions indicated allow for tolerances of +/-0.15-1.0 mm
mm
mm
mm
mm
LABEL
art no 112820
art no 112940
art no 112720
art no 112820
art no 112940
art no 112720
art no 112830
art no 112950
art no 112730
art no 112830
art no 112950
art no 112730
art no 112830
art no 112950
art no 112730
art no 112830
art no 112950
art no 112730
art no 112830
art no 112950
art no 112730
art no 112830
art no 112950
art no 112730
mm
5
Cerbo Classic Cl
- Push-on system- tamper evident - external guarantee ring - Permits attachment of
desiccator capsule - FDa registered, DmF
type iii, DmF no 18790- injection moulding
Cerbo snap safe
- Push-on system- tamper evident - one component closure - inner membrane - FDa registered, DmF
type iii, DmF no 18790- injection moulding
Cerbo ClassiC
Caps Cerbo Classic sC
- Push-on system- tamper evident - inner membrane- FDa registered, DmF
type iii, DmF no 18790- injection moulding
43.2
10.1
inner: lDPe outer: hDPe
51.3 43.0 51.2 36.3 44.5
10.1
inner: lDPe outer: hDPe
inner: lDPe outer: hDPe
inner: lDPe outer: hDPe
18.4 18.7 15.0 15.0
Dimensions indicated allow for tolerances of +/-0.2-0.5 mm
material hDPe hDPe
mm
mm
Cerbo ClassiC sC-34art no 112820
Cerbo ClassiC sC-42art no 112830
Cerbo ClassiC Cl-34art no 112720
Cerbo ClassiC Cl-42art no 112730
Cerbo snaP saFe 34art no 112940
Cerbo snaP saFe 42art no 112950
Caps with desiccant
our Cerbo Classic Cl caps are available assembled with desiccator capsules.
6
Colours to catch the eyeCerbo Classic caps and containers can be customised regarding colour – making your packaging a perfect communicator of your brand identity. Contact us for more information on how we can help you make a statement out of your packaging.
Cerbo ClassiC
Cerbo easy griP sC-34art no 112870
Cerbo easy griP sC-42art no 112880
Cerbo easy griP Cl-34art no 112970
Cerbo easy griP Cl-42art no 112980
45.6
18.8
53.3 45.5 53.5
18.8 24.0 24.0
Dimensions indicated allow for tolerances of +/-0.5-0.7 mm
material hDPehDPehDPehDPe
mm
mm
user-friendlyCerbo easy grip is designed to support people with limited dexterity. the adapter should be assembled with either our sC or Cl caps. FDa registered, DmF type iii, DmF no 18790.
7
mm
LABEL
Cerbo soliD
Caps
Cerbo solid safe
- screw-on system- tamper evident- threads
Cerbo soliD 20 ml art no 112510
Cerbo soliD 35 ml art no 112511
Cerbo soliD 50 ml art no 112512
Cerbo soliD 100 ml art no 112513
Cerbo soliD 175 ml art no 112514
37.8
48.0
25.8
16.0
37.8 37.8 58.0 58.0
58.3
25.8
27.0
25.8 25.8 25.8
40.0 37.0 65.0
73.8 76.0 109.0
Dimensions indicated allow for tolerances of +/-0.35-0.6 mm
Containers- screw-on system- narrow neck design- FDa registered, DmF type iii, DmF no 18790- threads- injection blow moulding- material: hDPe
mm
mm
mm
Cerbo soliD saFe art nr 112520
Cerbo soliD saFe Crart nr 112530
36.8
26.0
39.9
29.2
Dimensions indicated allow for tolerances of +/-0.15-0.5 mm
mm
mm
Cerbo solid safe Child resistant (Cr)
Child resistant according to iso 8317:2004
Caps with desiccant
our Cerbo solid safe caps are available assembled with desiccator capsules.
( incl 112520) 50 .0( incl 112530) 53 .2
( incl 112520) 75 .8( incl 112530) 79 .0
( incl 112520) 60 .3( incl 112530) 63 .5
( incl 112520) 78 .0( incl 112530) 81 .2
( incl 112520) 111.0( incl 112530) 114.2mm
material PPPP
- Permits attachment of desiccator capsule- external guarantee ring - injection moulding
nolato Cerbo ab
Visiting address: Verkmästarevägen 1-3P.o. box 905 se-461 29 trollhättanswedenPhone: +46 520 40 99 00Fax: +46 520 40 99 03
For further information and contacts:e-mail: [email protected]/nolatocerbo
PA
RT
NE
RS
RE
KL
AM
BY
RA
.SE