Date post: | 12-Jan-2016 |
Category: |
Documents |
Upload: | robert-willis |
View: | 212 times |
Download: | 0 times |
CERN
Erik van der Bij TS-DEM
TS-DEMDevelopment of Electronic Modules
TS-DEMDevelopment of Electronic Modules
Erik van der Bij
CERN
Electronics development support: how it is organized
CERN
Erik van der Bij TS-DEM
ContentsContents
• Overview of DEM
• Supply contracts
• Service contracts
• The good and bad of service contracts
• Ingredients for success
CERN
Erik van der Bij TS-DEM
DEMTurns schematics
into boards
DEMTurns schematics
into boards
• PCB design
• Manufacture of PCBs and special circuits
• Assembly
ALICE HMPID
TS-DEMTS-DEM
Micromega CAST
1 KW RF Ampli LEIR
NA60
Layout
Production
Assembly
Expertises
TOTEM
ATLAS CMS LHC
NA60
CERN
Erik van der Bij TS-DEM
Turn-around timeTurn-around time Prototype electronics production
multi-layer PCB, standard priority
• Tight planning and follow-up needed
• Need companies that you can rely on
Queue
2-3 weeks
Layout
1-2 weeks
Layout (and queue)
4 weeks
PCB fabrication
3 weeks
Assembly
2 weeks
Margin
1 week
We do these steps for over 2000 projects per year
We do these steps for over 2000 projects per year
Design office
DEM-BE
Circuit manufacturing
DEM-PMT
Assembly
DEM-WS
Sub-contracting
Large quantitiesmember states
Planning office(DEM-BE)
‘commercial’ contact
Ordering
Tracking
Invoicing
Circuit or moduleRequest
TS-DEM TS-DEM
Sub-contracting
(overflow of CERN capacity)
Prototypes, fast turn-aroundlocal industry
0.5 staff 2 staff prod.9 IS
0.5 staff 2 staff prod.9 IS
1.5 staff3.5 staff prod.10 IS
1.5 staff3.5 staff prod.10 IS
1 staff3 staff prod.3 IS
1 staff3 staff prod.3 IS
1 staff2 IS
1 staff2 IS
staff: includes section leaders staff prod: staff dedicated to production IS: industrial support
CERN
Erik van der Bij TS-DEM
Supply contractsSupply contracts
• Printed circuit boards– 300 KCHF/year, increases to 400 KCHF (LHC production)
– Have 4 contracts (Italy, Belgium, France, Norway)
– difficult to balance (60%, 15%, 15% and 10%) as one is much cheaper => next time only two companies
• Front-panels and small mechanics– 150 KCHF/year
– distributed over 2 companies (Spain, France)
– has a local stock of half-products (from Stores)
– Call for Tender came up with 3 interesting companies (ESP, FR, S), try them all out for three months (blanket order) before deciding to make a contract with only 2.
• Pay some attention to small contracts– you can save on a single Xerox copier 1500 CHF/year
CERN
Erik van der Bij TS-DEM
Service contractsService
contracts• Design office (S081-> FSU-03)
– 11 people (9 designers + 2 for documentation, ordering and billing)
– per year: 500 new designs, 150 modifications, 150 production only
– 1. Client sees first Section Leader about planning and technical solution
2. Section leader plans during weekly meeting with Team Leader
• Fabrication of Printed circuit boards (S081-> FSU-04)– 10-11 people
– around 1000 jobs per year
– Client sees first Section Leader for complicated projects; for simple projects client goes directly to Team leader
CERN
Erik van der Bij TS-DEM
Service contractsService
contracts
• Assembly (S081-> FSU-03)– 3 people. Part of FSU of design office
– around 200 prototype jobs per year
– Client sees first Section Leader for complicated projects; for simple projects client goes directly to Team leader
– larger jobs done on premises of contractor
CERN
Erik van der Bij TS-DEM
The good and bad of service contracts
The good and bad of service contracts• A good way to stay competitive
–keeps us and the contractor sharp (DEM has real prices, no mix w staff)
• Flexibility in size–can add or remove people with low effort and within a short time
• Contractor does not have knowledge in our domains–it’s only the Team at CERN
• Skills not updated–hardly any formal training given
• To keep clear separation staff/IS, cannot use IS forCERN core technologies, responsability for software and hardware, research on working methods and new programs, contacts with companies, reception of clients during absence of section leader
++
__
CERN
Erik van der Bij TS-DEM
FSU should improve some things
FSU should improve some things
• Extra layer of management– Team leader has now a manager local at CERN
– IS personnel will feel more part of their own company
• Contract for 5+1+1 years instead of 3+1+1– a change of contract is always difficult
• However: price increase– extra layer of management
– Swiss contract instead of French
CERN
Erik van der Bij TS-DEM
Ingredients for success
Ingredients for success
• Keep CERN core technologies with CERN staff– manufacturing of high-density circuits in cleanroom
– SMD assembly of prototypes (<10 pieces)
– still it would be a disaster if full change of IS personnel happens
• Don’t mix CERN staff and contract personnel
• CERN staff should be first interface to client– planning & decisions where and how work should be done
– technical discussions directly between client and industrial support