DEKRA Certification B.V.
j <B.T.M. Holtus H.R.M. BarendsManaging Director Certification Manager
© Integral publication of this certificate is allowed
ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
CERTIFICATE
Issued to:Applicant:eldoLED B.V.Science Park Eindhoven 51255692 ED Son En Breugel, The Netherlands
Licensee:eldoLED B.V.Science Park Eindhoven 51255692 ED Son En Breugel, The Netherlands
Product : Electronic LED driverTrade name(s) : eldoLEDType(s)/model(s) : DUALdrive 560/A, DUALdrive 560/S, DUALdrive 562/A, DUALdrive 562/S,
ECOdrive 560/A, ECOdrive 560/B, ECOdrive 560/S, ECOdrive 561/A, ECOdrive 561/B, ECOdrive 561/S, SOLOdrive 560/A, SOLOdrive 560/S, SOLOdrive 561/A, SOLOdrive 561/S, SOLOdrive 563/A, SOLOdrive 563/B, SOLOdrive 563/S, SOLOdrive 564/A, SOLOdrive 564/B and SOLOdrive 564/S
The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
DEKRA hereby declares that the above-mentioned product has been certified on the basis of:- a type test according to the standard EN 61347-1:2015, EN 61347-2-13:2014,
EN 61347-2-13:2014/A1:2017, EN 62384:2006 and EN 62384:2006/A1:2009- an inspection of the production location according to CENELEC Operational Document CIG 021- a certification agreement with the number 2158357
DEKRA hereby grants the right to use the ENEC certification mark.
The ENEC certification mark may be applied to the product as specified in this certificate for the duration of the ENEC certification agreement and under the conditions of the ENEC certification agreement.
This certificate is issued on 13 December 2018 and expires upon withdrawal of one of the above mentioned standards.
Certificate number: 71-106586
ANNEX TO ENEC CERTIFICATE 71-106586 page 1 of 4
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
SPECIFICATION OF THE CERTIFIED PRODUCT
Product dataProduct : Electronic LED driverTrade name(s) : eldoLEDType(s)/model(s) : DUALdrive 560/A, DUALdrive 560/S, DUALdrive 562/A,
DUALdrive 562/S, ECOdrive 560/A, ECOdrive 560/B, ECOdrive 560/S, ECOdrive 561/A, ECOdrive 561/B, ECOdrive 561/S, SOLOdrive 560/A, SOLOdrive 560/S, SOLOdrive 561/A, SOLOdrive 561/S, SOLOdrive 563/A, SOLOdrive 563/B, SOLOdrive 563/S, SOLOdrive 564/A, SOLOdrive 564/B and SOLOdrive 564/S
Rated input voltage : 120 - 250 Vac/dcRated frequency : 50-60 Hz; DCRated input current : 0,7 AOutput voltage : 60 V max.Output power : 50 WPower factor : >0,9C
Product data – type DUALdrive 560/AOutput current : 150 - 1400 mAMaximum case temperature : tc = 83 °CAmbient temperature range : ta = -20 ... +50 °CDescription : built-in/independent LED driverDimming protocol : DALI
Product data – type DUALdrive 560/SOutput current : 150 - 1400 mAMaximum case temperature : tc = 83 °CAmbient temperature range : ta = -20 ... +50 °CDescription : built-in LED driverDimming protocol : DALI
Product data – type DUALdrive 562/AOutput current : 150 - 1400 mAMaximum case temperature : tc = 83 °CAmbient temperaure range : ta = -20...+50 °CDecription : independent LED driverDimming protocol : DALI
Product data – type DUALdrive 562/SOutput current : 150 - 1400 mAMaximum case temperature : tc = 83 °CAmbient temperature range : ta = -20... +50 °CDescription : built-in LED driverDimming protocol : DALI
Product data – type ECOdrive 560/AOutput current : 150 - 1400 mAMaximum case temperature : tc = 75 °CAmbient temperature range : ta = -20 ... +50 °CDescription : independent LED driverDimming protocol : DALI
ANNEX TO ENEC CERTIFICATE 71-106586 page 2 of 4
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
Product data – type ECOdrive 560/BOutput current : 150 - 900 mA at ta max +45 °C
>900 - 1400 mA at ta max +40 °CMaximum case temperature : tc = 80 °CAmbient temperature range : ta = -20 ... +40/45 °CDescription : built-in LED driverDimming protocol : DALI
Product data – type ECOdrive 560/SOutput current : 150 - 1400 mAMaximum case temperature : tc = 75 °CAmbient temperature range : ta = -20 ... +50 °CDescription : built-in LED driverDimming protocol : DALI
Product data – type ECOdrive 561/AOutput current : 150 - 1400 mAMaximum case temperature : tc = 75 °CAmbient temperature range : ta = -20 ... +50 °CDescription : independent LED driverDimming protocol : 0-10 V
Product data – type ECOdrive 561/BOutput current : 150 - 900 mA at ta max +45 °C
>900 - 1400 mA at ta max +40 °CMaximum case temperature : tc = 80 °CAmbient temperature range : ta = -20 ... +40/45 °CDescription : built-in LED driverDimming protocol : 0-10 V
Product data – type ECOdrive 561/SOutput current : 150 - 1400 mAMaximum case temperature : tc = 75 °CAmbient temperature range : ta = -20 ... +50 °CDescription : built-in LED driverDimming protocol : 0-10 V
Product data – type SOLOdrive 560/AOutput current : 150 - 1400 mAMaximum case temperature : tc = 83 °CAmbient temperature range : ta = -20 ...+50 °CDescription : independent LED driverDimming protocol : DALI
Product data – type SOLOdrive 560/SOutput current : 150 - 1400 mAMaximum case temperature : tc = 83 °CAmbient temperature range : ta = -20 ...+50 °CDescription : built-in LED driverDimming protocol : DALI
ANNEX TO ENEC CERTIFICATE 71-106586 page 3 of 4
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
Product data – type SOLOdrive 561/AOutput current : 150 - 1400 mAMaximum case temperature : tc = 83 °CAmbient temperature range : ta = -20 ... +50 °CDescription : independent LED driverDimming protocol : 0-10 V
Product data – type SOLOdrive 561/SOutput current : 150 - 1400 mAMaximum case temperature : tc = 83 °CAmbient temperature range : ta = -20 ... +50 °CDescription : built-in LED driverDimming protocol : 0-10 V
Product data – type SOLOdrive 563/AOutput current : 150 - 1400 mAMaximum case temperature : tc = 75 °CAmbient temperature range : ta = -20 ... +50 °CDescription : independent LED driverDimming protocol : DALI
Product data – type SOLOdrive 563/BOutput current : 150 - 900 mA at ta max +45 °C
>900 - 1400 mA at ta max +40 °CMaximum case temperature : tc = 80 °CAmbient temperature range : ta = -20 ... +40/45 °CDescription : built-in LED driverDimming protocol : DALI
Product data – type SOLOdrive 563/SOutput current : 150 - 1400 mAMaximum case temperature : tc = 75 °CAmbient temperature range : ta = -20 ..+50 °CDescription : built-in LED driverDimming protocol : DALI
Product data – type SOLOdrive 564/AOutput current : 150 - 1400 mAMaximum case temperature : tc = 75 °CAmbient temperature range : ta = -20 ... +50 °CDescription : independent LED driverDimming protocol : 0-10 V
Product data – type SOLOdrive 564/BOutput current : 150 - 900 mA at ta max +45 °C
>900 - 1400 mA at ta max +40 °CMaximum case temperature : tc = 80 °CAmbient temperature range : ta = -20 ... +40/45 °CDescription : built-in LED driverDimming protocol : 0-10 V
ANNEX TO ENEC CERTIFICATE 71-106586 page 4 of 4
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
Product data – type SOLOdrive 564/SOutput current : 150 - 1400 mAMaximum case temperature : tc = 75 °CAmbient temperature range : ta = -20 ...+50 °CDescription : built-in LED driverDimming protocol : 0-10 V
TESTS
Test requirementsEN 61347-1:2015EN 61347-2-13:2014EN 61347-2-13:2014/A1:2017EN 62384:2006EN 62384:2006/A1:2009
Test resultThe test results are laid down in DEKRA test file 223228600.
Additional informationTemperature declared thermally protected: 130°CAll drivers are suitable for use in centrally supplied emergency luminaires, excluding high risk task area.
This certificate replaces certificate No. 71-103751 which we herewith declare invalid.
The list of components is laid down at test report 2232286.52.
ConclusionThe examination proved that all requirements were met.
Factory locationsAcuity Brands Lighting de México S de RL de CVAv La Silla #7711, Parque Industrial La Silla67193 Guadalupe, Nuevo Leon, Mexico
Acuity Brands Lighting1615 Elmore StreetCrawfordsville 47933, United States Of America