This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017.

This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory

quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017).

CERTIFICATE OF ACCREDITATION

ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA

This is to certify that

Acuren

705 Albany St.

Dayton, OH 45408

has been assessed by ANAB and meets the requirements of international standard

ISO/IEC 17025:2017 while demonstrating technical competence in the field of

TESTING

Refer to the accompanying Scope of Accreditation for information regarding the types of

activities to which this accreditation applies

AT-1309

Certificate Number

Certificate Valid Through: 02/08/2022

Version No. 006 Issued: 11/22/2019

Version 006 Issued: November 22, 2019 www.anab.org

Page 1 of 2

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

Acuren 705 Albany St.

Dayton, Ohio 45408

Chad Schmidt 937 228 9729

TESTING

Valid to: February 8, 2022 Certificate Number: AT-1309

Non-Destructive Testing

Specific Tests and/or

Properties Measured

Specification, Standard,

Method, or Test Technique

Items, Materials or

Product Tested

Key Equipment or

Technology

Radiography

ASTM E94, E1030, E1032,

E1742, E2104

ASME Sections: V, Art.2;

AWS D1.1, D1.2, D1.5,

D17.1;

MIL-STD453, 2175A PN

1601

Customer Specified

Acuren Internal Procedure

Automotive

Aerospace

Nuclear

Commercial

X-ray

Iridium / Co 60

CR-Flex unit

DDA Flat Panel

Liquid Penetrant

ASTM E165, E1209, E1219,

E1220, E1417, E1418; PN

1603, ASME Sections: V,

Art.6;

MIL-STD6866;

NAVSEA T9074-AS-GIB-

010/271;

ANSI: B31.1. 31.3

Customer Specified

Acuren Internal Procedure

Automotive

Aerospace

Nuclear

Commercial

Pin gages

Magnetic Particle

ASTM A275, E709, E1444;

ASME Sections: V, Art.7;

AWS D14.1; PN 1604

NAVSEA T9074-AS-GIB-

010/271

Customer Specified

Acuren Internal Procedure

Automotive

Aerospace

Nuclear

Commercial

Magnaflux

Mag Particle Bench

Version 006 Issued: November 22, 2019 www.anab.org

Page 2 of 2

Non-Destructive Testing

Specific Tests and/or

Properties Measured

Specification, Standard,

Method, or Test Technique

Items, Materials or

Product Tested

Key Equipment or

Technology

Ultrasonic

ASTM A388, A435, A577,

A609, A745, E114, E164,

E494, E587, E797,

ASME Sections: V, Art.5;

NAVSEA T9074-AS-GIB-

010/271

ASME/ANSI: B31.1, B31.3

Customer Specified

Acuren Internal Procedure

Automotive

Aerospace

Nuclear

Commercial

Ultrasonic

Meters

Visual

ASME: V, Art.9;

AWS D1.1, D.2, D1.5

SPVT-1, VT-1

Customer Specified

Acuren Internal Procedure

Automotive

Aerospace

Nuclear

Commercial

Visual examination only

Note:

1. This scope is formatted as part of a single document including Certificate of Accreditation No. AT-1309.

2. All scope fields of test can be conducted offsite as field tests.