C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number 20121114-E198301
Report Reference E198301-20060206
Issue Date 2012-NOVEMBER-14
William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 1
Issued to: ERICO INTERNATIONAL CORPORATION
34600 SOLON RD
SOLON OH 44139
This is to certify that
representative samples of
COMPONENT - TERMINAL BLOCKS
Cat. Nos. 569030, 569040, 569050, 569051, 569052,
569251, 569252, 569010, 569020, 569060 N and 569041.
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: Terminal Blocks, UL1059 and CSA C22.2 No 158-10
Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Recognized Component Marks for the U.S. and Canada should be considered as being covered by UL's Recognition and Follow-Up Service and meeting the appropriate U.S. and Canadian requirements.
The UL Recognized Component Mark for the U.S. generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions. The UL Recognized Component Mark for Canada consists of the UL Recognized Mark for Canada: and the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory.
Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Recognized Component Mark on the product.
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number 20140106-E198301
Report Reference E198301-20090511
Issue Date 2014-JANUARY-06
William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 1
Issued to: ERICO INTERNATIONAL CORPORATION
34600 SOLON RD
SOLON OH 44139
This is to certify that
representative samples of
COMPONENT - TERMINAL BLOCKS
USR and CNR - Terminal Blocks, Cat. No. 561130,
561131.
USR - Terminal Blocks, Cat. Nos. 561158, and 561159.
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: Terminal Blocks, UL1059
Terminal Blocks, CAN/CSA C22.2 No. 158-10
Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Recognized Component Marks for the U.S. and Canada should be considered as being covered by UL's Recognition and Follow-Up Service and meeting the appropriate U.S. and Canadian requirements.
The UL Recognized Component Mark for the U.S. generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions. The UL Recognized Component Mark for Canada consists of the UL Recognized Mark for Canada: and the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory.
Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Recognized Component Mark on the product.
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number E198301
Report Reference E198301-20090513
Issue Date 2021-MARCH-01
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
Issued to: ERICO INTERNATIONAL CORPORATION
34600 SOLON RD
SOLON OH 44139-2631 US
This certificate confirms that
representative samples of
TERMINAL BLOCKS - COMPONENT
Cat. No. 561132, 561134, 561136
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL 1059 and CSA C22.2 NO. 158-10, TERMINAL BLOCKS
Additional Information: See the UL Online Certifications Directory at
https://iq.ulprospector.com for additional information.
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up Services Procedure provides authorization to apply the UL Mark. Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s Follow-Up Services. Look for the UL Certification Mark on the product.
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number E198301
Report Reference E198301-20100613
Issue Date 2021-MARCH-01
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
Issued to: ERICO INTERNATIONAL CORPORATION
34600 SOLON RD
SOLON OH 44139-2631 US
This certificate confirms that
representative samples of
TERMINAL BLOCKS - COMPONENT
Cat. No. 561140, 561141, 561142, 561143, 561144,
561145, 561146, 561147
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL 1059 and CSA C22.2 NO. 158-10, TERMINAL BLOCKS
Additional Information: See the UL Online Certifications Directory at
https://iq.ulprospector.com for additional information.
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up Services Procedure provides authorization to apply the UL Mark. Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s Follow-Up Services. Look for the UL Certification Mark on the product.
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number E198301
Report Reference E198301-20100614
Issue Date 2021-MARCH-01
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
Issued to: ERICO INTERNATIONAL CORPORATION
34600 SOLON RD
SOLON OH 44139-2631 US
This certificate confirms that
representative samples of
TERMINAL BLOCKS - COMPONENT
Cat. No. 563995
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL 1059 and CSA C22.2 NO. 158-10, TERMINAL BLOCKS
Additional Information: See the UL Online Certifications Directory at
https://iq.ulprospector.com for additional information.
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up Services Procedure provides authorization to apply the UL Mark. Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s Follow-Up Services. Look for the UL Certification Mark on the product.
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number 20140103-E198301
Report Reference E198301-20131224
Issue Date 2014-JANUARY-03
William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 1
Issued to: ERICO INTERNATIONAL CORPORATION
34600 SOLON RD
SOLON OH 44139
This is to certify that
representative samples of
COMPONENT - TERMINAL BLOCKS
Terminal Blocks, Cat. No. 561150, 561151, 561152,
561153, 561154, 561155, 561156, and 561157.
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: Terminal Blocks, UL1059
Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's Recognition and Follow-Up Service.
The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.
Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Recognized Component Mark on the product.
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number 20160414-E198301
Report Reference E198301-20130413
Issue Date 2016-APRIL-14
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
Issued to: ERICO INTERNATIONAL CORPORATION
34600 SOLON RD
SOLON OH 44139
This is to certify that
representative samples of
COMPONENT - TERMINAL BLOCKS
Recognized Component , Cat. No.: 561160, 561161,
561162, 561163, 561164, 561165, 561166, 561167,
561168 and 561169
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL1059 & C22.2 No. 158-10, Terminal Blocks
Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Certification Mark on the product.
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number 20180725-E198301
Report Reference E198301-20180723
Issue Date 2018-JULY-25
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
Issued to: ERICO INTERNATIONAL CORPORATION
34600 SOLON RD
SOLON OH 44139-2631
This is to certify that
representative samples of
COMPONENT - TERMINAL BLOCKS
USR Recognized Component - Terminal Blocks, Cat. Nos.
SBF250, 561171.
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL1059, Terminal Blocks
Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark:
, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Certification Mark on the product.