CERTIFICATE OF COMPLIANCE Certificate Number 20160719-E193049 Report Reference E193049-20110926 Issue Date 2016-JULY-19 Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ Page 1 of 2 Issued to: CHENG TUNG INDUSTRIAL CO LTD 88 Rueiyuan St Bade District Taoyuan 334 Taiwan This is to certify that representative samples of COMPONENT - ACROSS-THE-LINE CAPACITORS, ANTENNA-COUPLING COMPONENTS, LINE-BYPASS COMPONENTS AND FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT See Addendum page for Models Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: See Addendum page for Standards Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Certification Mark on the product.
Transcript
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number 20160719-E193049 Report Reference E193049-20110926
Issue Date 2016-JULY-19
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 2
Issued to: CHENG TUNG INDUSTRIAL CO LTD
88 Rueiyuan St Bade District Taoyuan 334 Taiwan
This is to certify that
representative samples of
COMPONENT - ACROSS-THE-LINE CAPACITORS, ANTENNA-COUPLING COMPONENTS, LINE-BYPASS COMPONENTS AND FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT
See Addendum page for Models
Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.
Standard(s) for Safety: See Addendum page for Standards Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Certification Mark on the product.
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number 20160719-E193049 Report Reference E193049-20110926
Issue Date 2016-JULY-19
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 2 of 2
This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Standards: UL 60384-14# - Fixed Capacitors for Use in Electronic Equipment – Part 14: Sectional Specification: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains CSA E60384-1:14 - Fixed Capacitors for Use in Electronic Equipment - Part 1: Generic Specification CSA E60384-14:14 - Fixed Capacitors for Use in Electronic Equipment – Part 14: Sectional Specification: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains Models USR, CNR - Component – Class X1 Capacitors, Model CTX series with capacitance from 0.0047 µF to 10 µF with tolerance suffix code J(±5%), K(±10%), U(+10%/-5%) and M(±20%). Class X2 Capacitors, Model CTX series with capacitance from 0.0047 µF to 52 µF with tolerance suffix code J(±5%), K(±10%) and M(±20%).Refer to CONSTRUCTION DETAILS for Model designation and rated capacitance. USR, CNR - Component – Class X1/X2 Capacitors, Model CTX350V series with capacitance ranges from 0.0047 µF to 1.0 µF with tolerance suffix code J(±5%), K(±10%), U(+10%/-5%) and M(±20%). Refer to CONSTRUCTION DETAILS for Model designation and rated capacitance.
ENEC LICENCE Licence No. ENEC-01396-A1-M2 Page 1/3 Date of Issue 2017-01-05
Certification ManagerJan-Erik Storgaard
This is to certify that representative sample(s) of the Product described herein ("Certified Product")have been investigated and found in compliance with the Standard(s) indicated on this License, inaccordance with the ENEC Requirements. The Designated License holder is entitled to use the ENEC15 Mark (as shown in annex 1) for the Certified Product manufactured at the production site(s)identified above in accordance with the ENEC Mark Service Agreement including without limitationthe ENEC Mark Testing and Certification Services Service Terms. Only those Products bearing theENEC Mark should be considered as being covered by UL's ENEC Mark Service. This License shallremain valid unless terminated earlier in accordance with the Service Agreement including withoutlimitation if the Standard identified on this Certificate is amended or withdrawn prior the Date ofWithdrawal of conflicting Standard(s).
Certification Body UL International Demko A/S, Borupvang 5A, DK-2750Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected]
Production site CHENG TUNG INDUSTRIAL CO LTD88 Rueiyuan StBade DistrictTaoyuan, 334 Taiwan
Certification Mark See Annex 1Certified Product Fixed Capacitors For Electromagnetic Interference Suppression
And Connection To The Supply Mains, Wound Film TypeModel CTX series
Trademark
Rated Voltage / Frequency See Page 2Rated Current / Power See Page 2
Insulation Class -Degree of protection (IP) -
Tested acc. to EN 60384-14:2013Test Report No. CAP-4787331080-A-1 correction 3 issued on 2016-12-21
Additional This Certificate replaces earlier issued ENEC Licence No. ENEC-01396-A1-M1 to correct typographical errors in the ratings.
ENEC LICENCE Licence No. ENEC-01396-A1-M2 Page 2/3 Date of Issue 2017-01-05
Certification Body This is to certify that representative sample(s) of the Product described herein ("Certified Product") have been investigatedand found in compliance with the Standard(s) indicated on this License, in accordance with the ENEC Requirements. TheDesignated License holder is entitled to use the ENEC 15 Mark (as shown in annex 1) for the Certified Productmanufactured at the production site(s) identified above in accordance with the ENEC Mark Service Agreement includingwithout limitation the ENEC Mark Testing and Certification Services Service Terms. Only those Products bearing theENEC Mark should be considered as being covered by UL's ENEC Mark Service. This License shall remain valid unlessterminated earlier in accordance with the Service Agreement including without limitation if the Standard identified on thisCertificate is amended or withdrawn prior the Date of Withdrawal of conflicting Standard(s).
Ratings:310 Vac; 50/60Hz; subclass X1/X2 0.0047 to 10μF; subclass X2, 0.0047 to 52μF, 40/105 or 110/21/B, Cap tolerance J (±5%) or K (±10%) or M (±20%).
X1/X2, 350 Vac; 50/60Hz; 0.0047μF to 1.0μF, 40/110/21/B or C, Capacitance tolerance J(±10%) or K(±10%) or M(±20%).
X1/X2, 330/350/380 Vac; 50/60Hz; 0.0047μF to 1.0μF, 40/110/21/B or C, tolerance J(±5%), U(+10%/-5%), K(±10%)and M(±20%) and X2, 330/350/380 Vac; 50/60Hz; 0.0047μF to 10μF, 40/110/21/B or C.
X1/X2, 440/480/500 Vac; 50/60Hz; 0.0047μF to 4.0μF, 40/110/21/B or C, Capacitance tolerance J(±5%), U(+10%/-5%), K(±10%) and M(±20%).
Annex 1 to Licence No.
ENEC-01396-A1-M2Annex of the form of the Mark
Certification Body This is to certify that representative sample(s) of the Product described herein ("Certified Product") have been investigatedand found in compliance with the Standard(s) indicated on this License, in accordance with the ENEC Requirements. TheDesignated License holder is entitled to use the ENEC 15 Mark (as shown in annex 1) for the Certified Productmanufactured at the production site(s) identified above in accordance with the ENEC Mark Service Agreement includingwithout limitation the ENEC Mark Testing and Certification Services Service Terms. Only those Products bearing theENEC Mark should be considered as being covered by UL's ENEC Mark Service. This License shall remain valid unlessterminated earlier in accordance with the Service Agreement including without limitation if the Standard identified on thisCertificate is amended or withdrawn prior the Date of Withdrawal of conflicting Standard(s).
A
* Identification number of the Certification Body
Size of the mark:
The size of the mark may be reduced on the condition that it remains legible and that the ratio b/a=1,7 is kept
