62
Document kind Document number Revision AMD MDD Exd-19000 B Issued by Country Author Date Language Pages Electrical Machines Italy F. Morrone 31/01/06 en 1(2) Division/Department Creator Approver Distribution Status DMPA P. Bodini I. Costa Internal Approved We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. © Copyright 2002 ABB CERTIFICATES 1 General As mentioned in the MDD Exd-03000, AMD machines are provided with certificates that allow world-wide installation. The list of certifications is always improved and up-to-date time by time so that it is not possible to provide a definitive issue. However, the main documents are available in the SCOT Library. Copy of other certificates (T.B., accessories, special executions…) can be required to the factory. 2 List of Main certificates 2.1 European Standards - Certifications according to Directive 76/117/EEC and 79/196/EEC, in force up to 30 / 6 / 2003 Machine Designation Size Protection Reference Std's Bearings Execution Certificate Number AMD…R 355 EEx d IIB T4 EN 50014 EN 50018 IEC 60079-1 Antifriction & Sleeve EX-96.D.004 AMD…R 400 EEx d IIB T4 EN 50014 EN 50018 IEC 60079-1 Antifriction & Sleeve EX-94.C.035 AMD…R 450 - 500 EEx d IIB T4 EN 50014 EN 50018 IEC 60079-1 Antifriction & Sleeve EX-94.C.036 AMD…T 500 ÷ 710 EEx d IIB T4 EN 50014 EN 50018 IEC 60079-1 Antifriction EX-99.E.008 AMD…T 500 ÷ 710 EEx d IIB T4 EN 50014 EN 50018 IEC 60079-1 Sleeve EX-99.E.009 AMD…R 355 ÷ 500 EEx d IIC T4 EN 50014 EN 50018 IEC 60079-1 Antifriction EX-98.D.066
