Date post: | 21-Nov-2014 |
Category: |
Technology |
Upload: | hernaldo-mendoza |
View: | 514 times |
Download: | 2 times |
Wet-pregcz Ifsnbmep Nfnep{b Obwb
CFRP
Method for preparing the mould
Lab. of Composite Materials, UNAQ
Sealant tape
Lab. of Composite Materials, UNAQ
x3 Mold Release
x2 Release Film
x3 Release agent
[5 min.]
[3 min.]
[3 min.]
Mould preparation
Lab. of Composite Materials, UNAQ
Cutting 50x50cm [twill weave CF]
Preparing for a [0/45/-45/0] configuration
Lab. of Composite Materials, UNAQ
Twill pattern helps for 45° cutting
Lab. of Composite Materials, UNAQ
Before wet-preg, fiber weighting and resin calculation
Lab. of Composite Materials, UNAQ
Wet-preg process
Lab. of Composite Materials, UNAQ
Lay-up over mould and covered with Release Film
Lab. of Composite Materials, UNAQ
Breather/bleeder material
Lab. of Composite Materials, UNAQ
Bagging
Lab. of Composite Materials, UNAQ
Vacuum assisted wet-preg process
Lab. of Composite Materials, UNAQ
Soon, composites mechanical testing!