Date post: | 24-Dec-2015 |
Category: |
Documents |
Upload: | lambert-fisher |
View: | 216 times |
Download: | 0 times |
CGVision with BACnet server(only for ZB-S and CG2000!)
04-04-2011
7.2
04.04.2011 - A.Klepper 2
LAN
(RJ45)
BMSwith BACnet-Technology
PC workplace withCGVision
LAN (RJ45)
Visualisation of
BACnet objects(event orientated)
IP-RouterConfig-server
ZB-S
CG-S Bus / FTT10A
ZB-S or CG2000 Systems
ZB-S
IP-RouterClient 1
ZB-S
CG-S Bus / FTT10A
ZB-S or CG2000 Systems
ZB-S
ZB-S
TCP/IP connection – CGVision via CG-S/IP-Router
BACnet/IP – BMS on CGVisionBMS has access to the BACnet Server !Visualisation of BACnet Objects
Schema: BACnet-connection via OPC-Client/BACnet Server
OPC-ClientSNVT
BACnet Server
BACnet Objects
EthernetBACnet /IP
TCP/IP
CG2000
CG2000 CG2000
04.04.2011 - A.Klepper 3
BACnet status informations 22 pcs. Status informations each device (ZB-S / CG2000)1) Device in normal operation2) Sum failure with luminaire failure3) Sum failure without luminaire failure4) Communication error CG-S bus5) Device in battery mode6) Battery duration test is activ7) Device is blocked8) Bettery failure (e.g. interruption)9) Sum failure in a circuit (e.g.:fuse)10) Mains failure (sum)11) Deep discharge protection is activ12) Interruption of the battery circuit13) Charging failure battery14) Isolation failure battery, battery + or – against protection earth15) Rated duration test time not reached16) General luminaire failure17) Functionstest is activ18) Battery voltage to high19) Charging unit failure20) Charging booster failure21) Mains failure - device22) Mains failure – sub distribution board
04.04.2011 - A.Klepper 4
BACnet analogue datas and switch commandos 4 pcs. Analogue values each device1) Battery current (Charging- discharging current)
2) Battery voltage
3) Battery temperature
4) Battery capacity
16 (ZB-S) or 30 (CG2000) pcs. switch commandos each device 1) LON-Switch 1
2) LON-Switch 2
…
16) LON-Switch 16 (ZB-S)
…..
30) LON-Switch 30 (only CG2000)
3 pcs. status informations e. device (mirror of relay outputs)1) Emergency operation
2) Normal operation
3) Sum failure
6 pcs. control comandos each device1) Block device
2) Release device
3) Start functiontest
4) Start battery duration test
5) Stop battery duration test
6) Quit deep discharge protection
04.04.2011 - A.Klepper 5
Example of status informations via BACnetScreenshot of a BACnet OPC-Server:
04.04.2011 - A.Klepper 6
Example of switch commandos via BACnet
Screenshot of a BACnet OPC-Server: