www.lannencenter.com

LÄNNEN 86 00ieCHALLENGES EVEN ITS STRONGEST CONTENDERS

Creates opportunities

EN

ONE MACHINE - 4 SUPERIOR PROPERTIESMOBILITY – VERSATILITY – PRODUCTIVITY – RESPONSIBILITY FOR THE ENVIRONMENT

LÄNNEN 8600ie TECHNICAL DATA

The Lännen 8600i is equipped with the economic and reliable Agco Power 44 AWI 4-cylinder diesel engine. The output of the engine, which complies with the Stage 3B emission standard, is 107 kW. The torque rating of 580 Nm is achieved at 1,200 engine revolutions per minute.

A well-designed drive transmission system gives the machine a high tractive force and a transport speed of up to 45 km/h.

These features – together with the new solutions realised in the operating hydraulics – may help to reduce the consumption of fuel by 10 %.

The oscillation of the frame, and the large turning angle of 42°, and the tilting trajectory of +/- 400 mm improve the machine's off-road properties even more.

The machine's fully armoured underside and high ground clearance ensure it continues to move with agility and steadiness even under extremely demanding conditions.

The extended, 2,700 mm long, wheelbase renders excellent stability while travelling on the road. The hight transport speed of 45 km/h enables the machine to be moved from one work site to the next conveniently and rapidly.

Load-sensing operating hydraulics with high output and the drive transmission load the engine no more than required by the task at hand.

New steering and control software for the operating and drive hydraulicstogether with redesigned control valves, have improved the machine's flexibility and precision.

Reduced redundant thermal load, increased speed and easier control at different stages of the work, economically yet efficiently.

Automatic oscillation control AOC – that is available as an option – monitors the frame's oscillation and the movement of the backhoe, and optimises operation of the oscillation lock.

This ingenious control system enables to take advantage of the Lännen 8600ie's large oscillation and steering angles, and control them efficiently. This helps to achieve excellent stability, efficiency and economy during varying operations.

The engine bonnet opens at the front, and turns fully up, completely revealing the service points of the engine.

Changing the engine oil has been made easier by positioning the drain plug in a more accessible location.

The drive transmission filter has also been relocated for better access, which makes changing the engine air filter now even easier.

The larger batteries of 2 x 170 Ah are now located under the cabin, making them also easier to maintain.

www.lannencenter.com

STRONG AND ECONOMICAL

EXCELLENT OFF-ROAD PROPERTIES, STRONG AND AGILE

LOAD-SENSING WORK AND DRIVE TRANSMISSION

AUTOMATIC CONTROL SYSTEM FOR OSCILLATION OF THE FRAME

EASY TO MAINTAIN

ENGINEAgco Power 44 AWI 4-cylinder, turbocharged and intercooled diesel engine, complies with Stage 3B emissionrequirements.Displacement 4.4 lMax. output 1,900 rpm 107 (146) kW (hp)Max. torque 587 Nm/1,500 rpm Capacity of the fuel tank 150 lAdblue 40 l

ELECTRIC APPLIANCESAlternator with multi-groove flat belt with automatic tightening 24V / 100 AhStarter 4.5 kWBatteries 2 x 170 Ahlocated under the cabin, easy to maintain.Electric engine heater 1,100 W

TRANSMISSION AND GEARBOXHydrostatic transmission.Range gearbox Dana, 2-stage, electric control.

Drive speed forward/reverse 1. gear 0 - 14,6 km/h 2. gear 0 - 45 km/h

AXLESDana axles, 4-wheel drive.Automatic friction locks in the front and rear, 100 % lock in the rear as an option.Oscillation of the frame +/- 400 mmAutomatic steering and control system of the frame oscillation, AOC (option).

WHEELS Front and rear tyres 18.4B30 159B .Nokian TRI / TL industrial pattern Rim DW16-30, reinforced by flanging. Valve guards.

BRAKES Oil pressure operated brakes in oil bath on front and rear axles. Parking brake, disc brake on rear axle. Electric control.

STEERINGHydrostatic LS-Orbitrol steering.Steering angle of the articulated joint ± 42°Turning radius to centre of the tyre 5.25 mSteering is possible also via the left control lever.

HYDRAULICSDanfoss valve, new control and steering systemsVariable displacement axial piston pump, max. flow 200 l/minMax. operating pressure with turbo hydraulics (option) 225 - 245 barCapacity of the hydraulic system 220 l

CABINRops and Fops tested.Noise level LpA / LWA (measured values) 67.5 / 101.5 dBErgonomic design, extremely low noise level in the cabin. Large-sized windows. Excellent visibility to the front, rear and sides. Hydraulic 2-stage tipping of the cabin with manually operated pump.

FRONT LOADER Mechanical self-level feature, position indicator for bucket. Operating pressure, turbo hydraulics 225 -> 245 barLifting force in the lower position/with turbo hydraulics 6,400 / 7,000 kpLifting force in the upper position/with turbo hydraulics 4,200 / 4,600 kpLoading height (bottom of the bucket on a level) 3,470 mmRecommended bucket volume SAE 1700 l (depends on the density of the material loaded).

BACKHOE Knuckle boom, straight backhoe available as an option.Operating pressure, turbo hydraulics 225 -> 245 barOutreach 6,410 mmDigging depth 4,500 mmLoading height, bottom of the bucket on a level 3,860 mmSwing angle of backhoe 180 + 54°Lifting force at max. reach/with turbo-hydraulics 1,600 / 1,750 kpSwing torque 4,320 kpmRecommended bucket volume SAE 410 l

MAIN DIMENSIONSLength/width 8,910 / 2,487 mmHeight cabin/backhoe 3,120 / 4,290 mmGround clearance 460 mmWeight 11,500 kg (without buckets, depends on the outfit).Weight distribution, in the front/rear, boom in the upper position 4,000 / 7,500 kg

Lännen Tractors Oy

Hirvikoskentie 242FIN-32200 Loimaa

Tel. +358 (0)20 7612 200Fax +358 (0)20 7612 290

Lännen Tractors Oy is the leading manufacturer and distributor of wheeled multi-purpose machines in the Nordic countries. The company’s range of products includes Lännen wheel loader backhoes, Lännen Multimate on-road backhoes, Lundberg multi-purpose machines and associated work attachments and services, and Watermaster waterway construction machines.

Lännen MCE group comprises the parent company Lännen MCE Oy, Lännen Tractors Oy, the Swedish subsidiaries Lännen Tractors AB, Lundberg Hymas AB and partly owned HVL Maskin AB. The group turns over about 45 million Euro and employs more than 150 people.

LÄNNEN – A STRONG, FAST, AGILE AND VERSATILE MACHINE WITH EXCELLENT OFF-ROAD PROPERTIES FOR VARIOUS CHALLENGING TASKS

• The strong frame structure and outstanding stability enable even handling of heavy loads in different work positions

• Excellent tractive force. Fast and economical on the road, max. 45 km/h.

• Extremely agile in operation; the articulated joint turns 42° and, as required, tilts +/- 400 mm.

• Excellent off-road properties; 30" tyres, high ground clearance and a completely armoured underside.

• Unrivalled usability; all essential operating controls positioned in the joysticks within easy reach.

• Unobstructed view when working in all directions, including upward.

• Ergonomically correctly positioned operating controls help the operator work longer without getting tired.

• Well-proven system for heating and circulating cabin air; air-conditioning is a standard feature.

LÄNNEN TRACTORS OY

We reserve the right for alterations

LÄNNEN – ONE MACHINE , 4 SUPERIOR PROPERTIES

FROM THE FACTORY RIGHT TO CHALLENGING WORK SITES

• The frame structure and excellent stability of the Lännen wheel loader backhoe range enable the machines to be manufactured and fitted for demanding special tasks right at the factory.

• Lännen 1900 access platform/pole grip for power-line construction.

• Lännen rail-road outfit for demanding operations on rails including limiters of movements as required by legislation.

• All equipment, required for district maintenance contracting, public works, clearing of brushwood and many other tasks, available directly from the factory

• Lännen wheel loader backhoes are always manufactured taking into account the specific needs and work conditions of the customer.

www.lannencenter.com

MOBILITYNo other machine can manage this.Dig, load, lift and transport.

VERSATILITYWith the versatile work attachments you are able to take on work from under the ground to high elevations.

PRODUCTIVITYAll worksites can now be dealt with by one single machine in a more cost-efficient way.

ENVIRONMENTALLY RESPONSIBLEUsing a durable machine with low fuel consumption, you can reduse the environmental load to a minimum.