www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton392

6L6L

Champ Pro PFMA high lumen LED floodlights

PFMA40L/PFMA50L

PFMA20L/PFMA25L

The Champ Pro PFMA LED family39% lighter than the previous design with a small footprint

Champ® Pro PFMA high lumen LED floodlights are designed to provide full-spectrum, crisp, white light. Four versions of the PFMA are available, providing ideal solutions for a wide range of applications.

Applications:• Locations requiring continuous and

consistent light levels in extreme ambient temperatures

• Areas requiring frequent on-and-off of lights

• Where extremely corrosive, wet, dusty, hot and/or cold conditions exist

• Manufacturing plants, heavy industrial, chemical, food and beverage facilities, mining, platforms, loading docks, tunnels, outdoor wall and pole mounted areas

Certifications and compliances:• DesignLights Consortium® Qualified

(pending)C

NEC model:NEC/CEC:• Type 4X, IP66UL standards:• UL1598; UL1598A; cUL

IEC/CE model:IEC:• IEC 60598-1 and IEC 60598-2-1• Wet locations• IP66• CE marked

Fixture life:•  Rated life of 60,000 hours at 55°C

operating ambient and 24/7 continuous operation for 365 days

Standard materials:•  Lamp housing and adapter – die cast

aluminum with Corro-free epoxy powder coat

• Lens – heat- and impact-resistant glass (standard)

• Gaskets – silicone and neoprene• External hardware – stainless steel

ModelNominal lumens WattsA

Equivalent MH luminaire

Typical energy savings / lifetime

PFMA20L 20,500 175 600W-750W Up to 78% reduction in energy costs and 120,000 hours of continuous operation

PFMA25L 25,500 216 750W-1000WPFMA40L 40,500 340 1500W+PFMA50L 50,500 411

Features:• Rugged design – engineered to perform in

ambient temperatures from -40°C to 55°C• High efficiency – engineered to deliver

117 lumens per watt• Full frame yoke – designed to utilize the

SFA6 slipfitter and SWB6 wall mount bracket, making it ideal for retrofit or new installationsB

• Custom optics – standard 7x6 pattern provides maximum light distribution

• 5 year fixture warranty

AUNV1 at 120 VAC.

BSFA6 slipfitter and SWB6 wall mount bracket sold separately (20L/25L models only).

CRefer to www.designlights.org Qualified Products List under Family Models for full listing details. Not all models are approved for all application categories.

Photometrics:•  Complete photometrics can be found at

www.crouse-hinds.com/photometrics

UL/cUL ListedIEC/CEType 4X; IP66

Electrical ratings – NEC model:120-277 VAC at 50/60 Hz 347-480 VAC at 50/60 Hz

Model Input power Input amps Input power Input amps

PFMA20L 160-158W 1.35-0.64A 163-162W 0.48-0.36APFMA25L 200-197W 1.67-0.75A 201-200W 0.59-0.44APFMA40L 330-323W 2.74-1.26A 326-322W 0.99-0.72APFMA50L 403-393W 3.37-1.50A 393-392W 1.15-0.86A

All models (UNV1 only)

Voltage range, VDC 127-300V at 50/60 Hz

All models

Power factor >0.90

Electrical ratings – IEC model:120-277 VAC at 50/60 Hz 347-440 VAC at 50/60 Hz

Model Input power Input amps Input power Input amps

nPFMA20L 160-158W 1.35-0.64A 163-162W 0.48-0.36AnPFMA25L 200-197W 1.67-0.75A 201-200W 0.59-0.44AnPFMA40L 330-323W 2.74-1.26A 326-322W 0.99-0.72AnPFMA50L 403-393W 3.37-1.50A 393-392W 1.15-0.86A

All models (UNV1 only)

Voltage range, VDC 127-300V at 50/60 Hz

All models

Power factor >0.90

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton 393

6L6L

Champ Pro PFMA high lumen LED floodlights

UL/cUL ListedIEC/CEType 4X; IP66

Rugged heat sink• Heat sink designed to perform and provide maximum light levels

in high ambient temperatures up to +55°C and as low as -40°C

• Thick walled castings make for a tough, rugged housing that keeps the internal driver and LED temperature down

Versatile design• Can be used for outdoor or

indoor applications, and for a wide range of mounting heights depending on model and light level requirement

Smaller and lighter• 25% smaller footprint than previous model

• 20 lbs. less weight than previous model

Full frame yoke• Designed to

utilize the SFA6 slipfitter and SWB6 wall mount bracket, making it ideal for retrofit or new installation (for 20L and 25L models)

High lumen output• Up to 120 lumens per watt

• Up to 78% energy savings over traditional HID fixtures(compared to 400W MH)

Multiple lens options• Tempered clear glass lens

standard

• Diffused glass lens optional

Thick walled castings make for a tough, rugged housing that keeps

Versatile design• Can be used for outdoor or

indoor applications, and for a wide range of mounting heights depending on model and light level requirement

High lumen output• Up to 120 lumens per watt

• Up to 78% energy savings over traditional HID fixtures(compared to 400W MH)

Multiple lens options• Tempered clear glass lens

standard

• Diffused glass lens optional

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton394

6L6L

Champ Pro PFMA high lumen LED floodlights

UL/cUL ListedIEC/CEType 4X; IP66

Entries

BLANK 3/4” NPT

M20 20mm

M25 25mm

PFMA 20L C Y /UNV34 76 M20 S891 BZ

Ordering information:

Light source / intensity

20L 20,500 nominal lumens

25L 25,500 nominal lumens

40L 40,500 nominal lumens

50L 50,500 nominal lumens

Model

PFMA NEC

nPFMA IEC/CE

Voltage

/UNV1100-277 VAC, 50/60 Hz; 127-300 VDC

/UNV34 347-440 VAC, 50/60 Hz

Optical distribution

767x6 floodlight pattern optics

333x3 floodlight pattern optics

Lens material

BLANK Clear glass lens

S891 Diffused glass lens

Color temperature

C 5000K, 70 CRI (cool white)

W 3000K, 80 CRI (warm white)

Part number example

PFMA20LCY/UNV34 76 M20 S891 BZ

D20L and 25L models only.

Mounting

Y Yoke

Paint

BLANK Gray

BZ Bronze

WH White

Accessories (ordered separately):Cat. #

• Bull horn, 2 tenon, gray .........................................................BLHN2• Bull horn, 2 tenon, bronze ...............................................BLHN-BZ2• Bull horn, 2 tenon, white ............................................... BLHN-WH2• Bull horn, 3 tenon, gray .........................................................BLHN3• Bull horn, 3 tenon, bronze ...............................................BLHN-BZ3• Bull horn, 3 tenon, white ............................................... BLHN-WH3

Description Cat. #• Bolt-on visor .............................................................................DSV2• Bolt-on wire guard ...................................................................... P62• Safety cable ............................................................................SC831• Slipfitter ................................................................................ SFA6D

• Slipfitter wall mount adapter ...............................................SWB6D

Description

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2019 Eaton 395

6L6L

Champ Pro PFMA high lumen LED floodlights

UL/cUL ListedIEC/CEType 4X; IP66

Dimensions and weights – PFMA20L/PFMA25L:

Dimensions – PFMA40L/PFMA50L:

Width Height Depth Weight

Model in. mm. in. mm. in. mm. lb. kg.

PFMA20L & 25L 15.50 393.70 12.00 304.80 7.00 177.80 34.00 15.40

Position (tilt) ft.-sq.

at 0° 1.50at 45° backwards 1.10at 60° forward 0.80

Effective projected area

Width Height Depth Weight

Model in. mm. in. mm. in. mm. lb. kg.

PFMA40L & 50L 18.00 457.20 24.00 609.60 17.28 438.80 77.00 34.90

Position (tilt) ft.-sq.

at 0° 3.20at 45° backwards 3.25at 60° forward 3.62

Effective projected area