2/2/2018 1 Taibah University College of Computer Science & Engineering Course Title: Discrete Mathematics Code: CS 103 Chapter 9 Relations Slides are adopted from “Discrete Mathematics and It's Applications” Kenneth H. Rosen; 7th edition, 2012. Relations ➢ What is a relation? Relation between elements of sets is just a subset of the Cartesian product of the sets. Relations can be used to solve problems such as: • Determining which pairs of cities are linked by airline flights in a network, • Finding a viable order for the different phases of a complicated project, • Producing a useful way to store information in computer databases.
Transcript
2/2/2018
1
Taibah University
College of Computer Science & Engineering
Course Title: Discrete Mathematics
Code: CS 103
Chapter 9
Relations Slides are adopted from “Discrete Mathematics and It's Applications”
Kenneth H. Rosen; 7th edition, 2012.
Relations
➢What is a relation?
Relation between elements of sets is just a subset of theCartesian product of the sets.
Relations can be used to solve problems such as:
• Determining which pairs of cities are linked by airline
flights in a network,
• Finding a viable order for the different phases of a
complicated project,
• Producing a useful way to store information in computer
databases.
2/2/2018
2
Relations
➢What is a relation?• Let A and B be any two sets. •A binary relation from A to B, written R : A B, is a subset
of the Cartesian product A x B.
• Recall: A x B = {(a, b) | a A, b B}• We use the notation a R b to denote that (a, b) ∈ R and a R b to denote that (a, b) R. •Moreover, when (a, b) belongs to R, a is said to be related to b by R.
• In other words, a binary relation from A to B is a set R of ordered pairs where the first element of each ordered pair comes from A and the second element comes from B.
Relations
Example :Let A be the set of students in your school, and let B be the set of courses. Let R be the relation that consists of those pairs (a, b), where a is a student enrolled in course b.
• Let A be the students in a the CS majorA = {Ali, Ahmed, Fares, Nasser}
• Let B be the courses the department offersB = {CS190, CS201, CS202}
We specify relation R A B as the set that lists all students a A enrolled in class b B
Example : Let A = {0, 1, 2} and B = {a, b}. Then {(0, a), (0, b), (1, a), (2, b)} is a relation from A to B.
This means, for instance, that 0 R a, but that 1 R b.
Relations can be represented graphically, as shown in Figure, using arrows to represent ordered pairs.
Another way to represent this relation is to use a table, which is also done in Figure
Relations on a set
Definition: A relation on the set A is a relation from A to A .
In other words, a relation on a set A is a subset o f A x A .
Example: Let A be the set { 1, 2, 3, 4 } Which ordered pairs are in the relation R = { (a , b) | a divides b }?
Solution: we see that
R = {(1,1), (1,2), (1,3), (1,4), (2,2), (2,4), (3,3), (4,4)}
1
2
3
4
1
2
3
4
R 1 2 3 4
1 X X X X
2 X X
3 X
4 X
2/2/2018
5
Relations
Example: Consider some relations on the set of integers
R1 = { (a , b) | a ≤ b }
R2 = { (a , b) | a > b }
R3 = { (a , b) | a = b or a = - b }
R4 = { (a , b) | a = b }
R5 = { (a , b) | a = b+1 }
R6 = { (a , b) | a + b ≤ 3 }
Which o f these relations contain each o f the pairs ( 1 , 1 ),
( 1 , 2), (2 , 1 ), ( 1 , - 1 ), and (2, 2)?
RelationsExample: How many relations are there on a set with n elements?
Answer:
1. A relation on set A is a subset from A×A.
2. A has n elements so A×A has n2 elements.
3. Number of subsets for n2 elements is , thus there are relations on a set with n elements.
e.g. If S = {a, b, c}, there are relations.
2
2n
51222 932
2/2/2018
6
Properties of Relations
➢ Properties of Relations
• There are several properties that are used to classify
relations on a set.
➢We will introduce the most important of these here.
• Reflexive
• Irreflexive
• Symmetric
•Antisymmetric
• Transitive
Properties of RelationsDefinition:
A relation R on a set A is called reflexive if (a, a) R for every element a A.Example: Consider the following relations on a set A = { l , 2, 3 , 4} :R1 = {( 1 , 1 ), ( 1 , 2), (2 , 1 ), (2, 2), (3 , 4), (4, 1 ) , (4, 4)} ,R2 = {( 1 , 1 ), ( 1 , 2), (2, I ) } ,R3 = { ( I , 1 ) , ( 1 , 2 ) , ( 1 , 4), (2, 1 ), (2, 2), (3 , 3 ) , (4, 1 ) , (4, 4)},R4 = {(2, 1 ), (3 , 1 ) , (3 , 2), (4, 1 ) , (4, 2), (4, 3)} ,R5 = {( 1 , 1 ) , ( 1 , 2), ( 1 , 3), ( 1 , 4), (2, 2), (2, 3), (2, 4), (3 , 3), (3 , 4), (4, 4)} ,
R6 = {(a, b) | a ≤ b} .Which of these relations are reflexive?Solution: The relations R3 , R5 and R6 are reflexive because they both contain all pairs of the form (a , a), namely, ( 1 , 1 ), (2, 2), (3 , 3), and (4, 4). The other relations are not reflexive because they do not contain all of these ordered pairs.
2/2/2018
7
Properties of Relations
Definition:
A relation R on a set A is called irreflexive if (a , a) R for
all a A.
➢ A relation can be neither reflexive nor irreflexiv
Note: “irreflexive” ≠ “not reflexive”
Example:
Let A = {1, 2} and R = {(1, 2), (2, 1), (1, 1)}
It is not reflexive, because (2, 2) R,
It is not irreflexive, because (1, 1) R.
Properties of Relations
Definition:
➢ A relation R on a set A is called symmetric iffor all a, b A, if (a , b) R (b , a) R.
➢A relation R on a set A is called antisymmetric if
for all a, b A, if (a, b) R (b, a) R.
That is, for all a, b ∈ A, if ((a , b) R (b , a) R) a=b.
Example: Consider these relations on the set of integers:R1 = {(a, b) | a = b}
Symmetric , antisymmetric.R2 = {(a, b) | a > b},
Not symmetric, antisymmetric.R3 = {(a, b) | a = b + 1},
Not symmetric, antisymmetric
2/2/2018
8
Properties of Relations
Example: Consider the following relations on a set A = { l , 2, 3 , 4} :
Which of these relations are symmetric and which are antisymmetric?
Solution: The relations R2 and R3 are symmetric.The relations R4, R5 , and R6 are all antisymmetric.The relation R1 neither symmetric nor antisymmetric
.
Properties of Relations
Example: Let A = {1, 2, 3}.
R1 = {(1, 2), (2, 2), (3, 1), (1, 3)}
Not reflexive, not irreflexive, not symmetric,
not antisymmetric
R2 = {(2, 2), (1, 3), (3, 2)}
Not reflexive, not irreflexive, not symmetric, antisymmetric
R3 = {(1, 1), (2, 2), (3, 3)}
Reflexive, not irreflexive, symmetric, antisymmetric
R4 = {(2, 3)}Not reflexive, irreflexive, not symmetric, antisymmetric
2/2/2018
9
Properties of Relations
Definition: A relation R on a set A is called transitive if
for all a, b, c A, ((a , b)R (b , c)R) (a , c)R
➢ If a < b and b < c, then a < c
Thus, < is transitive
➢ If a = b and b = c, then a = c
Thus, = is transitive
Properties of Relations
Example: Consider the following relations on a set A = { l , 2, 3 , 4} :
What are RI U R2 , RI R2 , RI - R2 , R2 - RI, and RI R2?
Solution:
• (x , y) R1 U R2 if and only if (x , y) R1 or (x, y) R2
(x , y) R1 U R2 if and only if x < y or x > y.
Since, the condition x < y or x > y is the same as the condition x y
Then R1 U R2 = {(x, y) I x y}
• (x, y) impossible to belong to both R1 and R2 So,
R1 R2 =
R1 - R2 = R1
R2 – R1 = R2
RI R2 = R1 U R2 - R1 R2 = {(x, y) | x y}
Combining Relations
Definition:Let R be a relation from a set A to a set B and S a relation from B to a set C. The composite of R and S is the relation consisting of ordered pairs (a, c), where a ∈ A, c ∈ C, and for
which there exists an element b ∈ B such that (a, b) ∈ R and (b, c) ∈ S. We denote the composite of R and S by S ◦ R.
Example: What is the composite of the relations R and S, where
R is the relation from {I, 2, 3} to {I, 2, 3, 4} With R = {(1, 1), (1, 4), (2, 3), (3, 1), (3, 4)} and
S is the relation from {l, 2, 3, 4} to {0, 1, 2}With S = {(1, 0), (2, 0), (3, 1), (3, 2), (4, I)}?
Solution: S R = {(1, 0), (1, 1), (2, 1), (2, 2), (3, 0), (3, I)}
2/2/2018
12
Combining Relations
Definition: powers of a relation RLet R be a relation on the set A.
The powers Rn, n = 1,2, 3, ... , are defined recursively by:
Example:
Let R = {(I, 1), (2, 1), (3, 2), (4, 3)}. Find the powers Rn , n = 2, 3,4, ....
Solution: R2 = R o R R2 = {(1, 1), (2, 1), (3, 1), (4, 2)}
R3 = R2 o R R3 = {(I, 1), (2, 1), (3, 1), (4, I)}.
R4 = R3 = {(1, 1), (2, 1), (3, 1), (4, I)}.
It follows that Rn = R3 for n = 5, 6, 7, .... Verify this!
Equivalence Relations
.
➢ A relation on a set A is called an equivalence relation if it is reflexive, symmetric, and transitive.
2/2/2018
13
Equivalence RelationsExample:Which of these relations on {0, 1, 2, 3} are equivalence relations? Determine the properties of an equivalence relation that the others lack1- { (0,0), (1,1), (2,2), (3,3) }
Has all the properties, thus, is an equivalence relation2- { (0,0), (0,2), (2,0), (2,2), (2,3), (3,2), (3,3) }
Not reflexive: (1,1) is missingNot transitive: (0,2) and (2,3) are in the relation, but not (0,3)
3- { (0,0), (1,1), (1,2), (2,1), (2,2), (3,3) }Has all the properties, thus, is an equivalence relation
4- { (0,0), (1,1), (1,3), (2,2), (2,3), (3,1), (3,2) (3,3) }Not transitive: (1,3) and (3,2) are in the relation, but not (1,2)
5- { (0,0), (0,1) (0,2), (1,0), (1,1), (1,2), (2,0), (2,2), (3,3) }Not symmetric: (1,2) is present, but not (2,1)Not transitive: (2,0) and (0,1) are in the relation, but not (2,1)
Equivalence RelationsExample:Let m be a positive integer with m > 1. Show that the relation
R = { (a , b) I a == b (mod m)} is an equivalence relation on the set of integers.Solution: We can see that a == b (mod m) if and only if m divides a - b. Note that a - a = 0 is divisible by m , because 0 = 0· m . Hence, a == a (mod m), so congruence modulo m is reflexive. Now suppose that a == b (mod m). Then a - b is divisible by m, soa - b = km , where k is an integer. It follows that b - a = (-k)m , so b == a (mod m). Hence, congruence modulo m is symmetric. Next, suppose that a == b (mod m) and b == c (mod m).Then m divides both a - b and b - c. Therefore, there are integers k and I with a - b = km and b - c = I m . Adding these two equations shows that a - c = (a - b) + (b - c) = km + Im = (k + I) m . Thus, a == c (mod m). Therefore, congruence modulo m is transitive. It follows that congruence modulo m is an equivalence relation.
2/2/2018
14
Equivalence Relations
Example: Let R be a relation on Z defined as follows:
a R b if and only if 5 | (a2 – b2).
Show that R is an equivalence relation.
Solution:
R is reflexive: a2 – a2 = 0 = 0×5 5 | (a2 – a2) a R a.
R is symmetric: If a R b 5 | (a2 – b2) a2 – b2 = m×5, m Z b2 – a2 = (-m)×5 5 | (b2 – a2) b R a.
R is transitive: Suppose that a R b 5 | (a2 – b2)
a2 – b2 = m×5, m Z and b R c 5 | (b2 – c2)
b2 – c2 = k×5, k Z . Now (a2 – b2) + (b2 – c2) = (a2 – c2) =(m + k)×5 5 | (a2 – c2) a R c.
Equivalence classes
Definition: Let R be an equivalence relation on a set A.The set of all elements that are related to an element a ofA is called the equivalence class of a.
The equivalence class of a with respect to R is denoted by[a]R. When only one relation is under consideration, wecan delete the subscript R and write [a] for thisequivalence class.
In other words, if R is an equivalence relation on a set A,the equivalence class of the element a is
[a]R = {s I (a , s) R } .
If b [a]R, then b is called a representative of thisequivalence class.
2/2/2018
15
Equivalence classes
Example: What are the equivalence classes of 0 and 1 for congruence modulo 4?Solution: The equivalence class of 0 contains all integers a such that a == 0 (mod 4). The integers in this class are those divisible by 4. Hence, the equivalence class of 0 for this relation is
[0] = { . . . , -8, -4, 0, 4, 8 , . . . } .The equivalence class of 1 contains all the integers a such that a == 1 (mod 4). The integers in this class are those that have a remainder of 1 when divided by 4. Hence, the equivalenceclass of 1 for this relation is
[ 1 ] = { . . . , -7, -3 , 1 , 5 , 9, . . . } .
Relations and Their Properties
Exercises:
2/2/2018
16
Relations and Their Properties
Relations and Their Properties
2/2/2018
17
Relations and Their Properties
1. Which of these relations on {0, 1, 2, 3} are equivalence
relations? Determine the properties of an equivalence relation
