5

1. With the headphones OFF, long press the right headsets

“ ” for 5 seconds to enter Bluetooth Pairing Mode, open

the Bluetooth menu on phone and select the headset name

"POP" to connect .

While charging, long press the “volume up” button for 5

seconds until the indicator flashes blue 3 times, the pairing

information of the headset will be cleared (Reset).

When a phone call comes, the headset sends out a beep, or

ringtone. Short press the “ ” once to answer the call, or

just answer normally from your phone.

When there is an incoming call, long press “ ” for 1 second.

During phone call, short click the “ ”once

or use the key on the phone to hang up the call.

When on a call, double press “ ”

Hang Up

Gently push the earbud into your ear and adjust for a comfortable fit.

Earbuds should fit snug in the ear for best sound quality.

To change ear bud sizes, simply pull earbud from headphones and

replace with desired size. Twist new earbud onto headphone, may

require rotation and applied pressure.

Slide into ear as pictured and wrap lock-bar behind the earlobe.

Fitting and Wiring

charging

Charge the Headphones with any micro-usb cable (included). Plug

cable into USB port for charging. The indicator will glow red when

it is charging, and turn blue when the battery is full.

MICRO USB

When playing music , long press Vol+/- for 1 second

When playing music, short press Vol+/- once

Bluetooth version: V4.1 Chipse: CSR

Charging Time: 1-2 hours Range: 30ft Range / 10mStandby Time: 240 hrs Charging Voltage：DC 5VOperating Time: Up to 8 hours

Bluetooth protocols： HFP, HSP, A2DP, AVRCPNotes: Playtime varies according to volume level and audio content

V4.1 Bluetooth version, compatible with over

99% of mobile phones and tablets.

Please do not return to Amazon, if you have any questions or need

help with installation please contact us at

info@popdesignproducts.com We will happily answer your email and

take you thru a step by step installation.

Warranty Information: Pop Design Products warrants to the original

purchaser of this product that for a period of one (1) year from the

date of purchase from Amazon, the product shall be free of defects in

materials or workmanship, and will repair or replace, at its sole

option, any defective product at no charge.

In the event Pop Design Products chooses to replace the product,

such replacement product may be a different model than the one

originally purchased, but will be equal or better model. This warranty

shall not cover any damage arising from improper use of the product,

accident, tampering, negligence, or product abuse. This warranty

does not cover damages caused by alteration of parts, removal of

parts tampering or disassembling. This warrtanty does not cover

damages caused by neglect or improper use.

Q、I have established connection with my smartphone, but I am not

hearing any sound?

A、Please make sure that you turn up the volume of both devices.

Some smartphones require you to setup the bluetooth headset as an

audio output device before sound is trasmitted. Please see your

smartphone instructions for details. If you are using a music player or

other bluetooth device, please make sure it supports A2DP stereo

music profile.

Q：Why is the connection unstable and cutting out intermittently?

A：Please make sure your headset is fully charged. Please make sure

there are no objects between the headset and you bluetooth device;

please make sure there is no radio or WIFI interference nearby.

Q：Can I use the headset while it is charging?

A：NO，you cannot use the headset while it is charging.

Q：The headset is not responding no matter what I do.

A：Please try to reset the headset. (see the “reset”section) by

holding down the “volume +” button.

Q：The sound is not very clear/ the caller cannot hear my voice

clearly.

A：Please adjust the volume on you phone and headset. Make sure

the microphone port of the headset is not obstruct and that you are

within range of your smartphone.

1. Before using the headset, please read the manual carefully and

keep it for future referrence.

2. The headset needs to be fully charged prior to your first-time use.

3. If the headset is left unused for over two weeks, please recharge it

for best use.

4. Use only USB chargers made by qualified manufacturers.

5. If the headset cannot be searched by your phone, please check

whether it is in pairing mode ; if left unconnected for extended

periods, the headset will exit pairing mode. Try resetting and

reconnecting with your smartphone from scratch.

1. Never disassemble or modify you headset for any reasons to avoid

any damages and danger.

2. Do not store the headset in extreme temperatures (under 32°F or

over 120°F).

3. Do not use harsh chemicals or strong detergents to clean the

headset.

4. If headset becomes wet, dry it before storage.

waterproofsports headset

wireless stereo sport headphonesuser manual

pop-btip7x

POP

POP

POP

1. Follow the pairing procedure to connect the headset to

Phone 1 and turn off the headset.

2. Longpress “ ”to enter pairing mode again. Activate the

bluetooth function of Phone 2 and search for the headset.

Select “ POP” from the devices list and click it to connect.

POPPOP

POP

POPPOP

When you are already on a call, if there s an incoming call on the

other phone, press “ ” to answer the 2nd call and put the

1st call on hold , you can switch between the two calls by double

pressing MFB.

When playing music, press “ ” once to pause, press again

to resume.

Multiple call handling

Play/Pause

During a call , long press “ ” for 1 second

Transfer voice between headset and phone

Contact Us With Any Questions:info@popdesignproducts.com

www.popdesignproducts.com

Questions? info@popdesignproducts.com

With the headsets off, power them on by long-pressing the

“ ” on both devices simultaneously for 3 seconds till

the indicators glow red and blue for 1 second.

LED

USB