chassis FL11.11 SERVICE MANUAL - Encompass · Make sure to refer to the section describing your...

32” LCD TV/DVDchassis FL11.11

© 2011 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

SERVICE MANUALContents

TYPE ALD320SS2 SYLVANIA (Serial No.: DS1)

32MD301B/F7 MAGNAVOX (Serial No.: DS1)

32MD311B/F7 MAGNAVOX (Serial No.: DS1)

This service manual contains information of different types of models.Make sure to refer to the section describing your model.

110427

IMPORTANT SAFETY NOTICE

Proper service and repair is important to the safe, reliable operation of all Funai Equipment. The service procedures recommended by Funai and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended.

It is important to note that this service manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It also is important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. Funai could not possibly know, evaluate and advice the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, Funai has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by Funai must first use all precautions thoroughly so that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected.

The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a tiny spec of color. This is not to be considered a defect in the LCD screen.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

TABLE OF CONTENTS

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1Laser Beam Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Standard Notes for Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1Cabinet Disassembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1Electrical Adjustment Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 How to Initialize the LCD TV/DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1Firmware Renewal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1Schematic Diagrams / CBA and Test Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1System Control Timing Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1Lead Identifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1Exploded Views. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-1Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-1Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-1

1-1 FL11.11SP

SPECIFICATIONS

< LCD TV Section >

< TUNER / NTSC >ANT. Input ---------------------- 75 Ω Unbal., F type

< TUNER / ATSC >

< LCD PANEL >

< VIDEO >

< AUDIO >All items are measured across 8 Ω load at speaker output terminal with L.P.F.

Description Condition Unit Nominal Limit

1. AFT Pull-In Range --- MHz ±2.3 ±2.1

2. Synchronizing Sens.TV.ch.4

CA.ch.31CA.ch.87

dBµdBµdBµ

181818

202023


1. Received Freq. Range (-28dBm) --- kHz --- ±100

2. ATSC Dynamic Range (min / max)ch.4ch.10ch.41

dBmdBmdBm

---------

-76/0-76/0

-76/+4


1. Native Pixel Resolution HorizontalVertical

pixelspixels

1366768

------

2. Brightness (w / filter) --- cd/m2 310 ---

3. Viewing Angle HorizontalVertical

°°

-88 to 88-88 to 88

------


1. Over Scan HorizontalVertical

%%

55

5±55±5

2. Color Temperature---xy

°K 120000.2720.278

---±3%±3%

3. Resolution (composite video) HorizontalVertical

lineline

400350

------


1. Audio Output 10% Distortion (ATSC 0 dBfs) Lch/Rch W 10.0/10.0 9.0/9.0

2. Audio Distortion (NTSC) 500mW: Lch/Rch % 0.5/0.5 2.0/2.0

3. Audio Freq. Response (NTSC) -6dB: Lch-6dB: Rch

HzHz

70 to 10 k70 to 10 k

------

1-2 FL11.11SP

<DVD Section>

< DVD >

Note: Nominal specifications represent the design specifications. All units should be able to approximate these. Some will exceed and some may drop slightly below these specifications. Limit specifications represent the absolute worst condition that still might be considered acceptable. In no case should a unit fail to meet limit specifications.


1. Horizontal Resolution (TDV-540 TIT.2 CHP.16) --- Line 350 330

2. Audio Distortion (LPCM 48 kHz, W/LPF) (PTD 1-NOR TIT.1 CHP.1)

LR % 0.03 0.07

3. Audio freq. response (LPCM 48 kHz) (PTD 1-NOR TIT.1 CHP.5 -- 10)

L, 20 HzR, 20 HzL, 20 kHzR, 20 kHz

dB 0 +4/-5

4. Audio S/N (LPCM 48 kHz, W/LPF, A-WTD) (PTD 1-NOR TIT.1 CHP.1 -- 2)

LR dB 85 75

2-1 TVDVDN_LBSP(1EM435619)(A1DA1UH).fm

LASER BEAM SAFETY PRECAUTIONS

This DVD player uses a pickup that emits a laser beam.

The laser beam is emitted from the location shown in the figure. When checking the laser diode, be sure to keep your eyes at least 11.8 inches (30 cm) away from the pickup lens when the diode is turned on. Do not look directly at the laser beam.

CAUTION: Use of controls and adjustments, or doing procedures other than those specified herein, may result in hazardous radiation exposure.

Location: Top of LCD Module

Do not look directly at the laser beam coming from the pickup or allow it to strike against your skin.

Drive Mechanism Assembly

Laser Beam Radiation

Laser Pickup

Turntable

3-1 LTVN_ISP

IMPORTANT SAFETY PRECAUTIONS

Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.

Safety Precautions for LCD TV Circuit1. Before returning an instrument to the

customer, always make a safety check of the entire instrument, including, but not limited to, the following items:

a. Be sure that no built-in protective devices are defective and have been defeated during servicing. (1) Protective shields are provided on this chassis to protect both the technician and the customer. Correctly replace all missing protective shields, including any removed for servicing convenience. (2) When reinstalling the chassis and/or other assembly in the cabinet, be sure to put back in place all protective devices, including but not limited to, nonmetallic control knobs, insulating fishpapers, adjustment and compartment covers/shields, and isolation resistor/capacitor networks. Do not operate this instrument or permit it to be operated without all protective devices correctly installed and functioning. Servicers who defeat safety features or fail to perform safety checks may be liable for any resulting damage.

b. Be sure that there are no cabinet openings through which an adult or child might be able to insert their fingers and contact a hazardous voltage. Such openings include, but are not limited to, (1) spacing between the Liquid Crystal Panel and the cabinet mask, (2) excessively wide cabinet ventilation slots, and (3) an improperly fitted and/or incorrectly secured cabinet back cover.

c. Antenna Cold Check - With the instrument AC plug removed from any AC source, connect an electrical jumper across the two AC plug prongs. Place the instrument AC switch in the on position. Connect one lead of an ohmmeter to the AC plug prongs tied together and touch the other ohmmeter lead in turn to each tuner antenna input exposed terminal screw and, if applicable, to the coaxial connector. If the measured resistance is less than 1.0 megohm or greater than 5.2 megohm, an abnormality exists that must be corrected before the instrument is returned to the customer. Repeat this test with the instrument AC switch in the off position.

d. Leakage Current Hot Check - With the instrument completely reassembled, plug the AC line cord directly into a 120 V AC outlet. (Do not use an isolation transformer during this test.) Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI) C101.1 Leakage Current for Appliances and Underwriters Laboratories (UL) 1410, (50.7). With the instrument AC switch first in the on position and then in the off position, measure from a known earth ground (metal water pipe, conduit, etc.) to all exposed metal parts of the instrument (antennas, handle brackets, metal cabinet, screw heads, metallic overlays, control shafts, etc.), especially any exposed metal parts that offer an electrical return path to the chassis. Any current measured must not exceed 0.5 milli-ampere. Reverse the instrument power cord plug in the outlet and repeat the test.

ANY MEASUREMENTS NOT WITHIN THE LIMITS SPECIFIED HEREIN INDICATE A POTENTIAL SHOCK HAZARD THAT MUST BE ELIMINATED BEFORE RETURNING THE INSTRUMENT TO THE CUSTOMER OR BEFORE CONNECTING THE ANTENNA OR ACCESSORIES.

2. Read and comply with all caution and safety-related notes on or inside the receiver cabinet, on the receiver chassis, or on the Liquid Crystal Panel.

ALSO TEST WITHPLUG REVERSEDUSING ACADAPTER PLUGAS REQUIRED

TEST ALL EXPOSEDMETAL SURFACES

READING SHOULD NOT BE ABOVE 0.5 mA

EARTHGROUND

_

DEVICELEAKAGECURRENT

TESTER

+BEINGTESTED

3-2 LTVN_ISP

3. Design Alteration Warning - Do not alter or add to the mechanical or electrical design of this TV receiver. Design alterations and additions, including, but not limited to circuit modifications and the addition of items such as auxiliary audio and/or video output connections, might alter the safety characteristics of this receiver and create a hazard to the user. Any design alterations or additions will void the manufacturer's warranty and may make you, the servicer, responsible for personal injury or property damage resulting therefrom.

4. Hot Chassis Warning -

a. Some TV receiver chassis are electrically connected directly to one conductor of the AC power cord and maybe safety-serviced without an isolation transformer only if the AC power plug is inserted so that the chassis is connected to the ground side of the AC power source. To confirm that the AC power plug is inserted correctly, with an AC voltmeter, measure between the chassis and a known earth ground. If a voltage reading in excess of 1.0 V is obtained, remove and reinsert the AC power plug in the opposite polarity and again measure the voltage potential between the chassis and a known earth ground.

b. Some TV receiver chassis normally have 85V AC(RMS) between chassis and earth ground regardless of the AC plug polarity. This chassis can be safety-serviced only with an isolation transformer inserted in the power line between the receiver and the AC power source, for both personnel and test equipment protection.

c. Some TV receiver chassis have a secondary ground system in addition to the main chassis ground. This secondary ground system is not isolated from the AC power line. The two ground systems are electrically separated by insulation material that must not be defeated or altered.

5. Observe original lead dress. Take extra care to assure correct lead dress in the following areas: a. near sharp edges, b. near thermally hot parts-be sure that leads and components do not touch thermally hot parts, c. the AC supply, d. high voltage, and, e. antenna wiring. Always inspect in all areas for pinched, out of place, or frayed wiring. Check AC power cord for damage.

6. Components, parts, and/or wiring that appear to have overheated or are otherwise damaged should be replaced with components, parts, or wiring that meet original specifications. Additionally, determine the cause of overheating and/or damage and, if necessary, take corrective action to remove any potential safety hazard.

7. Product Safety Notice - Some electrical and mechanical parts have special safety-related characteristics which are often not evident from visual inspection, nor can the protection they give necessarily be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identified by a # on schematics and in parts lists. Use of a substitute replacement that does not have the same safety characteristics as the recommended replacement part might create shock, fire, and/or other hazards. The product's safety is under review continuously and new instructions are issued whenever appropriate. Prior to shipment from the factory, our products are strictly inspected to confirm they comply with the recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.

3-3 LTVN_ISP

Precautions during ServicingA. Parts identified by the # symbol are critical for

safety.Replace only with part number specified.

B. In addition to safety, other parts and assemblies are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements.Examples: RF converters, RF cables, noise blocking capacitors, and noise blocking filters, etc.

C. Use specified internal wiring. Note especially:

1) Wires covered with PVC tubing

2) Double insulated wires

3) High voltage leads

D. Use specified insulating materials for hazardous live parts. Note especially:

1) Insulation Tape

2) PVC tubing

3) Spacers

4) Insulators for transistors.

E. When replacing AC primary side components (transformers, power cord, etc.), wrap ends of wires securely about the terminals before soldering.

F. Observe that the wires do not contact heat producing parts (heat sinks, oxide metal film resistors, fusible resistors, etc.)

G. Check that replaced wires do not contact sharp edged or pointed parts.

H. When a power cord has been replaced, check that 11~13 lb (5~6 kg) of force in any direction will not loosen it.

I. Also check areas surrounding repaired locations.

J. Use care that foreign objects (screws, solder droplets, etc.) do not remain inside the set.

K. When connecting or disconnecting the internal connectors, first, disconnect the AC plug from the AC supply outlet.

L. When installing parts or assembling the cabinet parts, be sure to use the proper screws and tighten certainly.

3-4 LTVN_ISP

Safety Check after ServicingExamine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards.

1. Clearance Distance

When replacing primary circuit components, confirm specified clearance distance (d) and (d') between soldered terminals, and between terminals and surrounding metallic parts. (See Fig. 1)

Table 1: Ratings for selected area

Note: This table is unofficial and for reference only. Be sure to confirm the precise values.

2. Leakage Current Test

Confirm the specified (or lower) leakage current between B (earth ground, power cord plug prongs) and externally exposed accessible parts (RF terminals, antenna terminals, video and audio input and output terminals, microphone jacks, earphone jacks, etc.) is lower than or equal to the specified value in the table below.

Measuring Method: (Power ON)

Insert load Z between B (earth ground, power cord plug prongs) and exposed accessible parts. Use an AC voltmeter to measure across both terminals of load Z. See Fig. 2 and following table.

Table 2: Leakage current ratings for selected areas

Note: This table is unofficial and for reference only. Be sure to confirm the precise values.

AC Line Voltage Region Clearance Distance (d), (d’)

110 to 130 V U.S.A. or Canada

≥ 3.2 mm (0.126 inches)

AC Line Voltage Region Load Z Leakage Current (i) Earth Ground (B) to:

110 to 130 V U.S.A. or Canada

0.15 µF CAP. & 1.5 kΩ RES. Connected in parallel i ≤ 0.5 mA rms Exposed accessible

parts

Chassis or Secondary Conductor

Primary Circuit

Fig. 1

d' d

AC Voltmeter (High Impedance)

Exposed Accessible Part

B Earth Ground Power Cord Plug Prongs

Z

Fig. 2

4-1 TVDVDN_SN

STANDARD NOTES FOR SERVICING

Circuit Board Indications1. The output pin of the 3 pin Regulator ICs is

indicated as shown.

2. For other ICs, pin 1 and every fifth pin are indicated as shown.

3. The 1st pin of every male connector is indicated as shown.

Instructions for Connectors1. When you connect or disconnect the FFC (Flexible

Foil Connector) cable, be sure to first disconnect the AC cord.

2. FFC (Flexible Foil Connector) cable should be inserted parallel into the connector, not at an angle.

Pb (Lead) Free SolderPb free mark will be found on PCBs which use Pb free solder. (Refer to figure.) For PCBs with Pb free mark, be sure to use Pb free solder. For PCBs without Pb free mark, use standard solder.

How to Remove / Install Flat Pack-IC

1. Removal

With Hot-Air Flat Pack-IC Desoldering Machine:

1. Prepare the hot-air flat pack-IC desoldering machine, then apply hot air to the Flat Pack-IC (about 5 to 6 seconds). (Fig. S-1-1)

2. Remove the flat pack-IC with tweezers while applying the hot air.

3. Bottom of the flat pack-IC is fixed with glue to the CBA; when removing entire flat pack-IC, first apply soldering iron to center of the flat pack-IC and heat up. Then remove (glue will be melted). (Fig. S-1-6)

4. Release the flat pack-IC from the CBA using tweezers. (Fig. S-1-6)

CAUTION:

1. The Flat Pack-IC shape may differ by models. Use an appropriate hot-air flat pack-IC desoldering machine, whose shape matches that of the Flat Pack-IC.

2. Do not supply hot air to the chip parts around the flat pack-IC for over 6 seconds because damage to the chip parts may occur. Put masking tape

Top View

Out In

Bottom ViewInput

5

10

Pin 1

Pin 1

FFC Cable

Connector

CBA

* Be careful to avoid a short circuit.

Pb free mark

Fig. S-1-1

4-2 TVDVDN_SN

around the flat pack-IC to protect other parts from damage. (Fig. S-1-2)

3. The flat pack-IC on the CBA is affixed with glue, so be careful not to break or damage the foil of each pin or the solder lands under the IC when removing it.

With Soldering Iron:

1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder flux which is applied to all pins of the flat pack-IC, you can remove it easily. (Fig. S-1-3)

2. Lift each lead of the flat pack-IC upward one by one, using a sharp pin or wire to which solder will not adhere (iron wire). When heating the pins, use a fine tip soldering iron or a hot air desoldering machine. (Fig. S-1-4)



Hot-airFlat Pack-ICDesolderingMachine

CBA

Flat Pack-IC

Tweezers

Masking Tape

Fig. S-1-2

Flat Pack-IC Desoldering Braid

Soldering Iron

Fig. S-1-3

Fine TipSoldering Iron

SharpPin

Fig. S-1-4

4-3 TVDVDN_SN

With Iron Wire:

1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder flux which is applied to all pins of the flat pack-IC, you can remove it easily. (Fig. S-1-3)

2. Affix the wire to a workbench or solid mounting point, as shown in Fig. S-1-5.

3. While heating the pins using a fine tip soldering iron or hot air blower, pull up the wire as the solder melts so as to lift the IC leads from the CBA contact pads as shown in Fig. S-1-5.



Note: When using a soldering iron, care must be taken to ensure that the flat pack-IC is not being held by glue. When the flat pack-IC is removed from the CBA, handle it gently because it may be damaged if force is applied.

2. Installation1. Using desoldering braid, remove the solder from

the foil of each pin of the flat pack-IC on the CBA so you can install a replacement flat pack-IC more easily.

2. The “ I ” mark on the flat pack-IC indicates pin 1. (See Fig. S-1-7.) Be sure this mark matches the pin 1 on the PCB when positioning for installation. Then presolder the four corners of the flat pack-IC. (See Fig. S-1-8.)

3. Solder all pins of the flat pack-IC. Be sure that none of the pins have solder bridges.

To Solid Mounting Point

Soldering Iron

Iron Wire

or

Hot Air Blower

Fig. S-1-5

Fine TipSoldering IronCBA

Flat Pack-ICTweezers

Fig. S-1-6

Example :

Pin 1 of the Flat Pack-ICis indicated by a " " mark. Fig. S-1-7

Presolder

CBA

Flat Pack-IC

Fig. S-1-8

4-4 TVDVDN_SN

Instructions for Handling Semi-conductorsElectrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work.

1. Ground for Human Body

Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be charged on the body.

2. Ground for Workbench

Be sure to place a conductive sheet or copper plate with proper grounding (1 MΩ) on the workbench or other surface, where the semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through the body grounding band, be careful to avoid contacting semi-conductors with your clothing.

<Incorrect>

CBA

Grounding Band

Conductive Sheet orCopper Plate

1MΩ

1MΩ

<Correct>

CBA

5-1 FL11.11-A_DC

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly FlowchartThis flowchart indicates the disassembly steps for the cabinet parts, and the CBA in order to gain access to items to be serviced. When reassembling, follow the steps in reverse order. Bend, route and dress the cables as they were.

2. Disassembly Method*1: Refer to the following "Reference Notes in the

Table."

*2: 32MD311B/F7

Note:

(1) Order of steps in procedure. When reassembling, follow the steps in reverse order. These numbers are also used as the Identification (location) No. of parts in figures.

(2) Parts to be removed or installed.

(3) Fig. No. showing procedure of part location

(4) Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered. P = Spring, L = Locking Tab, S = Screw, H = Hex Screw, CN = Connectore.g. 2(S-2) = two Screws of (S-2), 2(L-2) = two Locking Tabs of (L-2)

(5) Refer to the following "Reference Notes in the Table."

Step/Loc. No.

Part Fig. No. Removal Note

[1] Stand Assembly D1 4(S-1) ---

[2] Rear Cabinet D1 13(S-2), 2(S-3), 3(S-4) ---

[3] DVD Holder D2D5

4(S-5), 4(S-6), CN901, CN902 ---

[4] DVD Mechanism

D2D5

(S-7a), 2(S-7b)*1, CN201, CN301, CN801

123456

[5] DVD Main CBA Unit

D2D5 --------------- ---

[6] Inverter CBA

D3D5

6(S-8), CN1001, CN1003, CN1050, CN1100, CN1150, CN1200, CN1900

---

[7] Jack CBA D3D5 2(S-9), CL701B ---

[8]Power Supply CBA

D3D5

7(S-10), CN101, CN301, CN302, CN303, CN801, CN802

---

[1] StandAssembly

[4] DVD Mechanism


[2] Rear Cabinet [10] Speaker

[6] Inverter CBA

[7] Jack CBA

[3] DVD Holder[9] Digital MainCBA Unit

[8] Power SupplyCBA

[13] LCD ModuleAssembly

[14] FrontCabinet

[11] IR SensorCBA

[12] FunctionCBA

[9] Digital Main CBA Unit

D3D5

3(S-11), 8(S-12), CN3005, Shield Box, Jack Holder

---

[10] Speaker D4 8(S-13), Hook, Speaker Holder(L, R) ---

[11] IR Sensor CBA

D4D5 2(S-14), CL103C ---

[12] Function CBA

D4D5

3(S-15),LED Lens*2, Function Knob*2, Shield Plate*2

---

[13]LCD Module Assembly

D4 (S-16) ---

[14] Front Cabinet D4 --------------- ---

↓(1)

↓(2)

↓(3)

↓(4)

↓(5)

Step/Loc. No.

Part Fig. No. Removal Note

5-2 FL11.11-A_DC

Reference Notes1. CAUTION 1: Electrostatic breakdown of the laser

diode in the optical system block may occur as a potential difference caused by electrostatic charge accumulated on cloth, human body etc., during unpacking or repair work.To avoid damage of pickup follow next procedures.

1) Short-circuit the three short lands of FPC cable with solder before removing the FFC cable (CN201). If you disconnect the FFC cable (CN201) before short-circuiting the three short lands of FPC cable, the laser diode of pickup will be destroyed. (Fig. D2)

2) Disconnect the connectors (CN301 and CN801). Remove the screw (S-7a) and remove the DVD Main CBA Unit. (Fig. D2)

2. Reassembly Notes of New DVD Mechanism:

a. To remove the Chassis Cover, remove the two screws (S-7b) as shown in Fig. D2.

b. To avoid damaging the pickup unit (laser diode), confirm that the three short lands (either of two places) are short-circuited by soldering as shown in Fig. D2.

c. Connect the FFC cables of the new DVD Mechanism to the three connectors (CN201, CN301, CN801) on the DVD Main CBA Unit.

d. After confirming that the FFC cables are securely connected to the three connectors, remove the solder from the three short lands. If the solder is not removed, the laser diode will not light and it will not be possible to read discs.

e. Insert the Pin on the Chassis Cover into the Hole on the Main Chassis as shown in Fig. D2. Then tighten the two screws (S-7b) to install the Chassis Cover.

3. CAUTION 2: When reassembling, confirm the FFC cable (CN201) is connected completely. Then remove the solder from the three short lands of FPC cable. (Fig. D2)

4. How to eject a disc in emergencyPress and hold [EJECT] on the unit for more than 5 seconds.

5. How to eject manually 1

1) Remove the Rear Cabinet.

2) Rotate the gear in the direction of the arrow as shown below.

6. How to eject manually 2

1) Remove the Rear Cabinet.

2) To remove the DVD Main CBA Unit, remove the screw (S-7a) in Fig. D2. Do not disconnect connectors.

3) To remove the Chassis Cover, remove the two screws (S-7b) as shown in Fig. D2.

4) Remove a disc.

The gear is turned to the directionof the arrow.

View from the "B" angle

B

5-3 FL11.11-A_DC

[2] Rear Cabinet

(S-1)

[1] Stand Assembly

(S-2)

(S-2)

(S-2)

(S-3)

(S-2)

(S-2)

(S-4)

(S-4)

(S-4)

Fig. D1

5-4 FL11.11-A_DC

Either of two places

FPC Cable

Chassis Cover

A

Main Chassis

Remove the two screws (S-7b), then short-circuit the three short lands by soldering as shown in View from the "A" angle.

View from the "A" angle

Pin

Hole

(S-7b)

(S-5)

(S-7a)

(S-6)

A


[4] DVD Mechanism

[3] DVD Holder

Fig. D2

5-5 FL11.11-A_DC

(S-8)

(S-8)

[7] Jack CBA

Jack Holder

[8] Power Supply CBA[9] Digital Main CBA Unit

[6] Inverter CBA

(S-9)

(S-10)

(S-11) (S-12)

(S-12)

Shield Box

(S-11)

(S-12)

(S-10)

(S-10)

Fig. D3

5-6 FL11.11-A_DC

(S-15)

(S-14)(S-13)Hook

(S-16)

[13] LCD Module Assembly

[11] IR Sensor CBA

[12] Function CBA

Speaker Holder (R)

Speaker Holder (L)

[10] Speaker

[14] Front Cabinet

(S-13)Hook

[10] Speaker

Shield Plate

LED Lens

Function Knob

(S-15)

(S-14)

(S-14)

(S-13)

Hook [11] IR Sensor CBA

[12] Function CBA

Speaker Holder (R)

Speaker Holder (L)

[10] Speaker

[14] Front Cabinet

(S-13)

Hook

[10] Speaker

Fig. D4

[LD320SS2, 32MD301B/F77]

[32MD311B/F7]

5-7 FL11.11-A_DC

TV Cable Wiring Diagram

AC CORD

CN601

CN301CN201

CN801CN401

CL701B

CN902

CN901

CL701A

CN303

CN301CN101 CN802 CN801

CN602

CN201CN1001

CN1900CN1200

CN1150

CN1100

CN1050

CN1003

CN302

To DVD Mechanism

DVD MainCBA Unit

Jack CBA

To Speaker To Speaker

CN3002

CN3003

CN3006

CN3005

CL103C

CL101B

CL103B

Power Supply CBA

Inverter CBA

Function CBAIR Sensor CBA

Digital MainCBA Unit

To LCD ModuleAssembly



Fig. D5

6-1 FL11.11EA

ELECTRICAL ADJUSTMENT INSTRUCTIONS

General Note: “CBA” is abbreviation for “Circuit Board Assembly.”Note: Electrical adjustments are required after

replacing circuit components and certain mechanical parts. It is important to perform these adjustments only after all repairs and replacements have been completed. Also, do not attempt these adjustments unless the proper equipment is available.

Test Equipment Required1. NTSC Pattern Generator (Color Bar W/White

Window, Red Color, Dot Pattern, Gray Scale, Monoscope, Multi-Burst)

2. Remote control unit

3. Color Analyzer

How to set up the service mode:

Service mode:1. Turn the power on.

2. Press [MENU] button to display Setup menu.

3. Select “Features”.

4. Select “Current Software Info”.

5. Press [0], [4], [2], [5], [7], [4] and [INFO] buttons on the remote control unit in this order. The following screen appears.

Code : Pic code : MIPS :

Press "POWER" key to exit.

*******-***-*-*****-**** **-*******-*****-**Push 0key

Tuner : Safety :

****-*****-****safety_Non

"*" differs depending on the models.

6-2 FL11.11EA

1. Purity Check ModeThis mode cycles through full-screen displays of red, green, blue, and white to check for non-active pixels.

1. Enter the Service mode.

2. Each time the [7] button on the remote control unit is pressed, the display changes as follows.

3. To cancel or to exit from the Purity Check Mode, press [CH RETURN] or [PREV CH] button.

2. VCOM Adjustment

1. Operate the unit for more than 60 minutes.

2. Set the color analyzer at the zero point calibration and bring the optical receptor pointing at the center of the LCD-Panel at a distance of 1.18 inches(3cm) away from the LCD-Panel surface.Note: The optical receptor must be set perpendicularly to the LCD Panel surface.

3. Enter the Service mode.

4. Press [3] button on the remote control unit.

5. Press [CHANNEL UP/DOWN] buttons on the remote control unit so that the color analyzer value becomes minimum.

6. To cancel or to exit from the VCOM Adjustment, press [CH RETURN] or [PREV CH] button.

[7] button

Note:When entering this mode, the default setting is White mode.

Purity Check Mode

[7] button

Red mode

Green mode

Blue mode

Black mode

[7] button

White mode

[7] button

[7] button

White 20% mode[7] button

Test Point Adj. Point

Screen [CHANNEL UP/DOWN ] buttons

M. EQ. Spec.

Color analyzer See below

Figure

Color Analyzer

To avoid interference from ambient light, this adjustment should be performed in a dark room.

L = 1.18 inches

Perpendicularity

6-3 FL11.11EA

The White Balance Adjustment should be performed when replacing the LCD Panel or Digital Main CBA.

3. White Balance AdjustmentPurpose: To mix red and blue beams correctly for pure white.

Symptom of Misadjustment: White becomes bluish or reddish.

1. Operate the unit for more than 60 minutes.

2. Input the White Raster(70%=70IRE, 40%=40IRE).

3. Set the color analyzer at the CHROMA mode and zero point calibration. Bring the optical receptor pointing at the center of the LCD-Panel at a distance of 1.18 inches(3cm) away from the LCD-Panel surface.Note: The optical receptor must be set perpendicularly to the LCD Panel surface.

4. Enter the Service mode. Press [VOLUME DOWN] button on the remote control unit and select “C/D” mode.

5. [CUTOFF]Press [1] button to select “COR” for Red Cutoff adjustment. Press [3] button to select “COB” for Blue Cutoff adjustment.[DRIVE]Press [4] button to select “DR” for Red Drive adjustment. Press [6] button to select “DB” for Blue Drive adjustment.

6. In each color mode, press [CHANNEL UP/DOWN] buttons to adjust the values of color.

7. Adjust Cutoff and Drive so that the color temperature becomes 12000°K (x= 0.272 / y= 0.278 ±0.005).

8. To cancel or to exit from the White Balance Adjustment, press [CH RETURN] or [PREV CH] button.

Test Point Adj. Point Mode Input

Screen[VOLUME DOWN]button

[VIDEO1]C/D

White Raster (APL 70%)

or(APL 40%)

M. EQ. Spec.

Pattern Generator, Color analyzer

x= 0.272 ± 0.005y= 0.278 ± 0.005

Figure

Color Analyzer

Perpendicularity

INPUT: WHITE 70%, 40%

To avoid interference from ambient light, this adjustment should be performed in a dark room.

L = 1.18 inches

40%=40IRE 70%=70IRE100IRE100IRE

0IRE 0IRE

INPUT SIGNAL

LowLight

HightLight

7-1 FL11.11INT

HOW TO INITIALIZE THE LCD TV/DVD

The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized.To put the program back at the factory-default, initialize the LCD TV/DVD using the following procedure.

< DVD Section >1. Turn the power on.

2. To enter the service mode, press the service button on the service remote control unit.

- To cancel the service mode, press [POWER] button on the service remote control unit.

3. To put the LCD TV/DVD into the DVD mode, press [CH RETURN] or [PREV CH] on the remote control unit.

4. To put the LCD TV/DVD into the Flash clear mode, press [INPUT SELECT] or [SOURCE] buttons on the remote control unit within five seconds.The following screen appears.

When “OK” appears on the screen, the factory default will be set.

5. To exit this mode, press[CHANNEL UP/DOWN] button to go to TV mode, or press [POWER] button to turn the power off.

Note: The name of buttons may vary with the brand of unit.

< LCD TV Section >1. Turn the power on.

2. Enter the service mode.

- To cancel the service mode, press [POWER] button on the remote control unit.

3. Press [INFO] button on the remote control unit to initialize the LCD television.

4. “INITIALIZED” will appear in the upper right of the screen. “INITIALIZED” color will change to green from red when initializing is completed.

Flash Memory Clear : OK

CHUCKING ON

8-1 FL11.11FW

FIRMWARE RENEWAL MODE

< DVD Section >1. Turn the power on and press [EJECT] button on

the remote control unit to put the LCD TV/DVD into DVD mode. Then remove the disc.

2. To put the LCD TV/DVD into F/W version up mode, press [9], [8], [7], [6], and [MODE] buttons on the remote control unit in this order.Fig. a appears on the screen.

Fig. a Version Up Mode Screen

3. Insert the disc for version up into the disc slot.

4. The LCD TV/DVD enters the F/W version up mode automatically. Fig. b appears on the screen. Make sure to insert the proper F/W for the state of this model.

Fig. b Programing Mode Screen

The appearance shown in (*1) of Fig. b is described as follows:

5. After programming is finished, the disc will be ejected automatically. Fig. c appears on the screen and the checksum will be shown in (*2).

Fig. c Completed Program Mode ScreenAt this time, no button is available.

6. Remove the disc.

7. Unplug the AC cord from the AC outlet then plug in again.

8. Press [EJECT] button on the remote control unit to put the LCD TV/DVD into DVD mode again.

9. Press [1], [2], [3], [4], and [INFO] buttons on the remote control unit in this order. Fig. d appears on the screen.

Fig. d10. Press [CLEAR] button on the remote control unit.

Fig. e appears on the screen.

Fig. eWhen “OK” appears on the screen, the factory default will be set. The firmware renewal mode is now complete.

11. To exit this mode, press [CHANNEL UP/DOWN] button to go to TV mode, or press [POWER] button to turn the power off.

F/W Version Up Mode Model No : ******VERSION : *.**

Please insert a DISCfor F/W Version Up.

EXIT: SELECT

"*******" differs depending on the models.

VERSION : ************.***Reading...


"*******" differ depending on the models.

(*1)

AppearanceNo. State

Reading... Sending files into the memory

Erasing... Erasing previous version data

Programming...

1

2

3 Writing new version data

VERSION : ************.***CompletedSUM : ****


"*******" differ depending on the models.

(*2)

MODEL : ****** Version : *.** Region : *

EXIT: SELECTEEPROM CLEAR : CLEAR


MODEL : ****** Version : *.** Region : *

EEPROM CLEAR : OK

EXIT: SELECTEEPROM CLEAR : CLEAR


8-2 FL11.11FW

< LCD TV Section >

Equipment Requireda. USB storage deviceb. Remote Control Unit

Firmware Update ProcedureNote: There are two states (the User Upgrade and

the Factory Upgrade) in firmware update.

The identification of User Upgrade and Factory Upgrade are done by the filename.

1. Turn the power off and unplug the AC Cord.

2. Insert the USB storage device to the USB port as shown below.

3. Plug the AC cord in the wall outlet and turn the power on.

4. The update will start and the following will appear on the screen.

Note: If the above screen isn’t displayed, repeat from step 1.

The appearance shown in *1 is described as follows.

5. When the firmware update is completed, the following will appear on the screen.

Remove the USB storage device from the USB port. Turn the power off and turn the power on again.

Note:

When the Factory Upgrade is used, after restarting TV, shift to initial screen menu in service mode. "INITIALIZED" will appear on the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is completed.

User Upgrade Upgrade the firmware only. The setting values are not initialized.

Factory upgrade Upgrade the firmware and initialize the setting values.

USB storagedevice

Rear Cabinet

Software upgrade in progress. Please wait.Do not remove the USB storage device or turn the TV off while upgrade is in progress.

Software Upgrade

Downloading...

Current Version:New Version:

*******-***-*-***-***********-***-*-***-****

0%*1

"*" differs depending on the models.

Appearance State

Downloading... Downloading the firmware from the USB storage device.

Writing... Writing the downloaded firmware in flash memory.

Checking... Checking the new firmware.

Software Upgrade

The software upgrade is completed.Remove USB storage device, turn TV off then on again.

9-1 FL11.11TR

TROUBLESHOOTING

[ Power Supply Section ]

The power cannot be turned on.

The fuse blows out.

FLOW CHART NO.1

FLOW CHART NO.2

Is normal state restored when once unpluggedpower cord is plugged again several seconds?

Check if there is any leak or short-circuiting on theprimary circuit component, and service it if defective.(C605, D601, D602, D603, D604, Q601, Q602, T601)

Yes

No

Yes

Is the fuse (F601) normal? See FLOW CHART No.2 <The fuse blows out.>

No

Yes

Is the AL+33V line voltage normal?No

Check each rectifying circuit of the secondarycircuit and service it if defective.

Check the presence that the primary componentis leaking or shorted and service it if defective.

Check the presence that the rectifying diode or circuit is shorted in each rectifying circuit of secondary side, and service it if defective.

After servicing, replace the fuse.

When the output voltage fluctuates.FLOW CHART NO.3

Does the photocoupler circuit on the secondary side operate normally?

No

Yes

Check IC601, D652, Q631 and their periphery circuit, and service it if defective.

When buzz sound can be heard in the vicinity of power circuit.FLOW CHART NO.4

Check if there is any short-circuit on the rectifying diode and the circuit in each rectifying circuit of the secondary side,and service it if defective. (IC631, Q207, Q209, Q210, Q211, Q501, Q635, Q636, Q637, Q640, Q641, Q642, Q643, D631, D632, D633, D634, D638, D641, D642, D646, D647)

Check D657, R661 and their periphery circuit, and service it if defective.

AL+33V is not output.FLOW CHART NO.5

Is approximately +34V voltage supplied to thecathode of D638?

No

Yes

Check C638, D638, D639 and their periphery circuit, and service it if defective.

Check IC601, D609, D611 and their periphery, circuit and service it if defective.

9-2 FL11.11TR

Check Q207, Q208, D205, P-ON-H1 line and their periphery circuit, and service it if defective.

LCD+24.5V is not output.FLOW CHART NO.6

Is approximately +30V voltage supplied to the collector of Q210?

No

Yes

See FLOW CHART No.5 <AL+33V is not output.>

Replace Q209.

Is approximately +16V voltage supplied to thebase of Q209?

Yes

NoCheck Q207, Q208, D203, D204, D211 and theirperiphery circuit, and service it if defective.

No

LCD+16V is not output.FLOW CHART NO.7

Is approximately +19V voltage supplied to thecollector of Q209?

Yes

Replace Q501.


Yes

NoCheck Q207, Q208, D203, D204, D211 and theirperiphery circuit, and service it if defective.

No

INV+16V is not output.FLOW CHART NO.8


Yes



P-ON+7V is not output.FLOW CHART NO.9

Is approximately +7V voltage supplied to thecollector of D646?

Check C644, D646 and their periphery circuit, and service it if defective.

Yes

No

Check if there is any leak or short-circuit onthe loaded circuit, and service it if defective.

9-3 FL11.11TR

See FLOW CHART No.9 <P-ON+7V is not output.>


AL+13V(M+13V) is not output.FLOW CHART NO.12

Yes

NoIs approximately +13V voltage supplied to thecathode of D641 and D642?

Check C639, D642 and their periphery circuit, andservice it if defective.


P-ON+5V is not output. (LCD+16V is outputted normally.)FLOW CHART NO.10

Is approximately +6.8V voltage supplied to thecollector of Q643?

Is approximately +6V voltage supplied to the base of Q641 and the base of Q643?

NoYes

Yes

Check D645 and their periphery circuit, and service it if defective.

No

Replace Q641 and Q643.

P-ON+5V(TUNER+5V) is not output. (LCD+16V is outputted normally.)FLOW CHART NO.11


Is approximately +6V voltage supplied to the base of Q641 and the base of Q643(Q640)?

NoYes

Yes


No

Replace Q641 and Q643(Q640).

D+5.5V is not output.FLOW CHART NO.13


Yes

No



9-4 FL11.11TR

EV+9V is not output.FLOW CHART NO.18

Is approximately +13V voltage supplied to theanode of D909?

P-ON+3.3V is not output.FLOW CHART NO.15


Is the "H" signal (approximately +3.5V) inputted to the base of Q637?

NoYes

Yes

Check C633, D633 and their periphery circuit, andservice it if defective.

Check Q638, Q639, P-ON-H2 line and their periphery circuit, and service it if defective.

Yes

See FLOW CHART No.13 <D+5.5V is not output.>


No

No

No

EV+3.3V is not output.FLOW CHART NO.16


Yes

Replace Q637.

Check Q903, D905 and their periphery circuit, and service it if defective.

See FLOW CHART No.13 <D+5.5V is not output.>No

DVD-ON+3.3V is not output.FLOW CHART NO.17


Yes

Check Q904, D906, and their periphery circuit, and service it if defective.

Check D901, D902, D903, D909 and their periphery circuit, and service it if defective.

P-ON+3V is not output.FLOW CHART NO.14


Yes

No



9-5 FL11.11TR

Is approximately +4V voltage supplied to Pin(3) of IC901?

Yes

NoCheck Q901, Q902, DVD-MAIN PWR line and their periphery circuit, and service it if defective.

See FLOW CHART No.13 <D+5.5V is not output.>No

EV+1.2V is not output.FLOW CHART NO.19

Is approximately +5V voltage supplied to theemitter of Q901?

Yes

Replace IC901.

P-ON+9V is not output. (LCD+16V is outputted normally.)FLOW CHART NO.20



Is approximately +5V voltage supplied to Pin(1) of IC631?

NoYes

Yes

Yes


NoCheck Q635, D659 and their periphery circuit, andservice it if defective.

See FLOW CHART No.5 <AL+33V is not output.>

See FLOW CHART No.12 <AL+13V(M+13V) is not output.>

No

No

AL+3.3V is not output.FLOW CHART NO.21


Yes

Replace IC631.

Replace Q642.


Check Q207, Q208, D205, P-ON-H1 line and their periphery circuit, and service it if defective.

Replace Q211.

Is approximately -8V voltage supplied to thebase of Q211?

Yes

No

No

LCD-6.8V is not output.FLOW CHART NO.22

Is approximately -9V voltage supplied to theAnode of D632?

Yes

9-6 FL11.11TR

[ Video Signal Section ]

No

Is the "L" pulse sent out Pin(1) terminal of remote control receiver (RS102) when the infrared remote control is activated?

Check the line between Pin(1) terminal of remote control receiver(RS102) and Pin(25) of CN301, and service it if defective.

Yes

Is the "L" pulse supplied to Pin(25) of CN301?

Yes

Is 3.3V voltage supplied to Pin(2) terminal of theremote control receiver (RS102)?

No

FLOW CHART NO.2

Operation is possible from the unit.

Check AL+3.3V line and service it if defective.

NoReplace the remote control receiver(RS102) or the remote control unit.

Yes

Replace Digital Main CBA Unit.

When pressing each switches (SW101A, SW103A~SW107A, SW151~SW153) do the voltage of Pin(29) of CN302 and Pin(2) of CN303 decrease?

Yes

The key operation is not functioning.FLOW CHART NO.1

Are the contact point and installation state of the key switches (SW101A, SW103A~SW107A, SW151~SW153) normal?

Re-install the switches (SW101A, SW103A~SW107A, SW151~SW153) correctly or replace the poor switch.

Check the switches (SW101A, SW103A~SW107A, SW151~SW153) and their periphery, and service it if defective.

Yes


No

No

No operation is possible from the remote control unit.

Picture does not appear normally.(Video input)FLOW CHART NO.3

Are the video signal inputted to Pin(4) of CN302?

Yes

Check the line between Pin(4) of CN302 and JK752, and service it if defective.

No

Replace Digital Main CBA Unit or LCD ModuleAssembly.

9-7 FL11.11TR

Picture does not appear normally.(S-Video input)FLOW CHART NO.5

Are the video signal outputted to the Pin(6, 8) ofCN302?

Check the line between Pin(6, 8) of CN302 and JK751, and service it if defective.

Check the line between Pin(26, 28) of CN302 andPin(10, 11) of TU301, and service it if defective.

Yes

No

No

Picture does not appear normally.(Tuner input)FLOW CHART NO.4

Are the DIF signal inputted to the Pin(26,28) of CN302?

Yes



Pin(6): S-VIDEO-CPin(8): S-VIDEO-Y

Picture does not appear normally.(Y/Pb/Pr input)FLOW CHART NO.6

Are the video signal inputted to the Pin(15, 17, 19) of CN302?

Check the line between Pin(15, 17, 19) of CN302 and input terminals(JK731, JK732, JK733), and service it if defective.

Yes

No


Pin(15): VIDEO-YPin(17): VIDEO-PbPin(19): VIDEO-Pr

Are the video signal inputted to the Pin(1, 3, 5) of CN902?

Replace DVD Main CBA Unit.No

Picture does not appear normally.(DVD PB)FLOW CHART NO.7


Pin(5) : DVD-YPin(3) : DVD-PbPin(1) : DVD-Pr

Yes

9-8 FL11.11TR

[ Audio Signal Section ]

Check SP801,SP802 and their periphery circuit,and service it if defective.

Are the audio(L/R) signals inputted to the Pin(1, 44)of IC801?


Yes

Yes

Audio is not outputted normally.(Audio input)FLOW CHART NO.1

Are the audio(L/R) signals inputted to Pin(2, 15)of IC771?

Check the line between Pin(2, 15) of IC771 andinput terminal(JK753, JK754), and service it if defective.

Yes

No

No

No

Are the audio(L/R) signals outputted to the Pin(1, 2)of CN801 and CN802?

Are the audio(L/R) signals outputted to the audio output terminal?

Check IC801 and their periphery circuit, and service it if defective.

CN801: SP(L) CN802: SP(R)

JK871: AUDIO(L)-OUT JK872: AUDIO(R)-OUT

No

Yes

Are the audio(L/R) signals inputted to each pin of CN301?


Check the line between Pin(6, 8) of CN301 and Pin(1, 44) of IC801, and service it if defective.


No Check the line between Pin(1, 7) of IC871 and audio output terminal(JK871, JK872), and service it if defective.

Pin(6) :Pin(8) :Pin(2) :Pin(4) :

AMP(L)-OUTAMP(R)-OUTAUDIO(L)-OUTAUDIO(R)-OUT

No

9-9 FL11.11TR


Replace Digital Main CBA Unit.No

Yes

Audio is not outputted normally.(Component Audio input)FLOW CHART NO.2


Check the line between Pin(4, 11) of IC771 andinput terminal(JK741, JK742), and service it if defective.

No




Yes

Yes

No

No






No

Yes




Pin(6) :Pin(8) :Pin(2) :Pin(4) :


9-10 FL11.11TR

Yes

Audio is not outputted normally.(Tuner input)FLOW CHART NO.3

Are the DIF signals outputted to the Pin(26, 28)of CN302?

Check TU301 and their periphery circuit, andservice it if defective.

No


Replace Digital Main CBA Unit.No




Yes

Yes

No

No






No

Yes




Pin(6) :Pin(8) :Pin(2) :Pin(4) :


10-1

BLOCK DIAGRAMS1. System Control Block Diagram

FL11.11BLS

KE

Y S

WIT

CH

IR S

EN

SO

R C

BA

FU

NC

TIO

N C

BA

PO

WE

R S

UP

PLY

CB

A

CL1

01B

RE

MO

TE

SE

NS

OR

RS

102

AL+

3.3V

D10

4P

OW

ER

STA

ND

BY

D10

5

D10

6D

VD

LED

14

4

CL1

03B

RE

MO

TE

22

P-O

N-H

15

5

CN

303

CN

302

CN

302

SC

LS

DA

4 5

TU

301

(TU

NE

R U

NIT

)

TO

INV

ER

TE

RB

LOC

K

DIA

GR

AM

(CN

1001

)

TO

PO

WE

R S

UP

PLY

B

LOC

K D

IAG

RA

MP

RO

TE

CT

2P

RO

TE

CT

1

P-O

N-H

2P

-ON

-H1

KE

Y-IN

16

6

CL1

03C

KE

Y S

WIT

CH

KE

Y-IN

13

3K

EY-

IN2

44

CN

201

CN

101

CN

301

Q17

1Q

172

CN

303

CN

401

CN

901

CN

601

CN

902

CN

301

TO

DV

D S

YS

TE

M

CO

NT

RO

L / S

ER

VO

B

LOC

K D

IAG

RA

M

DV

D M

AIN

CB

A U

NIT

KE

Y-IN

27

7D

VD

-LE

D8

8

DV

D-S

CLK

DV

D-C

S

DV

D-S

DAT

A

DV

D-P

-ON

DV

D-R

EM

OT

E

DV

D-D

ISC

-IN

DV

D-D

ISC

-OU

T

DV

D-A

UD

IO-M

UT

E

IC20

1,Q

203,

Q20

4,Q

205

DR

IVE

6P

RO

TE

CT

3

5B

ACK

LIG

HT-

SW

4B

ACK

LIG

HT-

AD

J

14V

CO

M

2626

DV

D-P

-ON

LED

-CO

NT

22

LED

-CO

NT

2525

DV

D-R

EM

OT

E

2424

DV

D-S

DAT

A

2121

DV

D-S

CLK

2222

DV

D-C

S

2323

DV

D-D

ISC

-IN

33

DV

D-D

ISC

-OU

T

1013

DVD-

AUDI

O-M

UTE

DV

D-M

AIN

-PW

R

TO D

VD

DIG

ITA

LS

IGN

AL

PR

OC

ES

SB

LOC

K D

IAG

RA

M

SC

LS

DA

9 8

TU

301

(TU

NE

R U

NIT

)

Eit

her

TU

301

is u

sed

for

Po

wer

Su

pp

ly C

BA

.

* *K

3

IC30

05(M

AIN

MIC

RO

CO

NT

RO

LLE

R)

DIG

ITA

L M

AIN

CB

A U

NIT

CN

3003

CN

3006

CN

3006

XO

UT

25X

IN25

X31

0125

MH

zO

SC

T22

T21

DV

D-S

CLK

U20

U21

N21 M3

M19

DV

D-C

S

T19

V20

W18

PR

OT

EC

T3

H22

VC

OM

-PW

MAB

21

PR

OT

EC

T2

G22

PR

OT

EC

T1

H21

KE

Y-IN

1G

21

DV

D-L

ED

L20

KE

Y-IN

2G

20

BA

CK

LIG

HT-

SW

W20

LED

1K

19

K1

L4

P-O

N-H

2K

20

RE

MO

TE

K21

P-O

N-H

1Y

22

Q30

33

CN

3002

W17

BA

CK

LIG

HT-

AD

J

IC30

06 (

ME

MO

RY

)

SC

K SI

SO

V19

Y21

AA22

Y20

6 5 2 1AA

213

K2

SC

L

SD

A

CN

3003

CN

3002

CS

WP

SC

KS

INS

OU

TC

SW

P

DV

D-S

DAT

A

L21

LED

-CO

NT

DV

D-P

-ON

DV

D-R

EM

OT

E

DV

D-D

ISC

-IN

DV

D-D

ISC

-OU

TD

VD

-AU

DIO

-MU

TE

BU

FF

ER

66

DV

D-P

-ON

1616

LED

-CO

NT

77

DV

D-R

EM

OT

E

88

DV

D-S

DAT

A

1313

DV

D-S

CLK

1111

DV

D-C

S

99

DV

D-D

ISC

-IN

1515

DV

D-D

ISC

-OU

T

2525

DVD-

AUDI

O-M

UTE

U19

DV

D-M

AIN

-PW

R5

5D

VD

-MA

IN-P

WR

2222

SC

L

2121

SD

A

1111

PR

OT

EC

T1

1515

PR

OT

EC

T2

55

PR

OT

EC

T3

2929

VC

OM

-PW

M

2626

BAC

KLI

GH

T-S

W

2828

BAC

KLI

GH

T-A

DJ

KE

Y-IN

129

29

P-O

N-H

19

9

RE

MO

TE

2525

LED

127

27P

-ON

-H2

11

KE

Y-IN

22

2D

VD

-LE

D3

3

TO A

UD

IOB

LOC

K

DIA

GR

AM

AU

DIO

-MU

TE

INP

UT

0IN

PU

T1

Y17

W22

C7-

SP

D-E

ND

VD

-SP

D-E

N

AU

DIO

-MU

TE

INP

UT

0IN

PU

T1

C7-

SP

D-E

ND

VD

-SP

D-E

N

L19

AL+

3.3V

Q30

05

Q30

06

10-2 FL11.11BLV

2. Video Block Diagram

CO

MP

ON

EN

T-Y

-IN

CO

MP

ON

EN

T-P

b-IN

CO

MP

ON

EN

T-P

r-IN

JK73

1

JK73

2

JK73

3

VID

EO

-IN

44

S-V

IDE

O-C

-IN

66

S-V

IDE

O-Y

-IN

88

S-V

IDE

O-S

W5

5C

OM

-VID

EO-Y

-IN15

15CO

M-V

IDEO

-Pb-

IN17

17CO

M-V

IDEO

-Pr-I

N19

19

JAC

K C

BA

CL7

01A

C

L701

BV

IDE

O-I

N5

S-V

IDE

O-C

-IN

3S

-VID

EO

-Y-I

N1

5 3 1JK

751

S-V

IDE

O-I

N

CY

JK75

2V

IDE

O-I

N

S-V

IDE

O-S

W-IN

22

PO

WE

R S

UP

PLY

CB

A

TU

301

DIF

-OU

T1

11D

IF-O

UT

210

(TU

NE

R U

NIT

) IF-A

GC

9

TU

301

DIF

-OU

T1

13D

IF-O

UT

212

(TU

NE

R U

NIT

) IF-A

GC

14

CN

302

DIF

-OU

T1

2626

IF-A

GC

2424

DIF

-OU

T2

2828

CN

302

CN

902

CN

303 20

20D

VD

-Pb

2222

DV

D-Y

1818

DV

D-P

r

WF

1W

F2

WF

3

WF

9

WF

4W

F5

WF

6

WF

8

WF

10

VID

EO

SIG

NA

LA

UD

IO S

IGN

AL

* *

Eit

her

TU

301

is u

sed

for

Po

wer

Su

pp

ly C

BA

.

DIG

ITA

L M

AIN

CB

A U

NIT

TO D

VD

DIG

ITA

LS

IGN

AL

PR

OC

ES

SB

LOC

K D

IAG

RA

M

DIF

-OU

T1

DIF

-OU

T2

IF-A

GC

VID

EO

-IN

S-V

IDE

O-C

-IN

S-V

IDE

O-Y

-IN

S-V

IDE

O-S

WC

OM

-VID

EO-Y

-IN

COM

-VID

EO-P

r-IN

COM

-VID

EO-P

b-IN

CN

601

DV

D M

AIN

CB

A U

NIT

DV

D-P

bD

VD

-Y3

6D

VD

-Pb

DV

D-P

r1

4D

VD

-Pr

58

DV

D-Y

DV

D-P

bD

VD

-Pr

DV

D-Y

TO D

IGIT

AL

SIG

NA

L P

RO

CE

SS

BLO

CK

DIA

GR

AM

CN

3006

CN

3006

CN

3003

10-3

3. Audio Block Diagram

FL11.11BLA

IC77

1(A

UD

IO S

ELE

CTO

R)

AU

DIO

(L)-

OU

T

AU

DIO

(R)-

OU

T

HD

MI-

AU

DIO

(L)-

IN

HD

MI-

AU

DIO

(R)-

IN

JK72

1

JK72

2

JK87

1

JK87

2

CO

MP

ON

EN

T-A

UD

IO(L

)-IN

CO

MP

ON

EN

T-A

UD

IO(R

)-IN

JK74

1

JK74

2

2 4 1 5 15 11 12 14

JAC

K C

BA

CL7

01A

CL7

01B

AU

DIO

(L)-

IN7

7A

UD

IO(R

)-IN

99

AU

DIO

(L)

-IN

AU

DIO

(R)

-IN

JK75

3

JK75

4

CN

302

AU

DIO

(L)

1313

AU

DIO

(R)

1111

CN

302

INP

UT

110

10IN

PU

T0

1212 C

N30

02C

N30

1A

UD

IO(L

)-O

UT

22

AU

DIO

(R)-

OU

T4

4A

MP

(L)-

OU

T6

6A

MP

(R)-

OU

T8

8

PO

WE

R S

UP

PLY

CB

AD

IGIT

AL

MA

IN C

BA

UN

IT

20

IC80

1 (A

UD

IO A

MP

)

1 44

9,10

13,1

4

35,3

631

,32

MU

TE

CO

NT

RO

L

CN

801

CL8

01S

P80

1S

PE

AK

ER

L-C

H

CN

802

SP

(R)-

1

CL8

02S

P80

2S

PE

AK

ER

R-C

H

PW

M1

PW

M2

DR

IVE

1

CN

302

CN

3006

CN

303

CN

3003

AU

DIO

-MU

TE

2020

JK84

1D

IGIT

AL

AU

DIO

-OU

T(C

OA

XIA

L)Q

841

Q77

1

Q77

2

BU

FF

ER

Q87

1

Q87

3,Q

874

MU

TE

Q87

2 MU

TE

SP

DIF

22

DV

D-S

PD

IF28

28

SP

(R)+

2

SP

(L)-

1S

P(L

)+2

Q80

1

CO

NT

RO

L LO

GIC

3

109

13

IC87

1 (O

P A

MP

)

13

75

DR

IVE

2

DR

IVE

CN

601

CN

902

DV

D-A

UD

IO(L

)9

12D

VD

-AU

DIO

(R)

1114

DV

D-S

PD

IF13

16

IC95

1 (O

P A

MP

)

13

75

IC30

10(D

/A C

ON

VE

RT

ER

)

D/A

CO

NV

ER

TE

R15 14

8 7 6 5

(L-C

H)

(R-C

H)

AU

DIO

(L)

AU

DIO

(R)

CN

303

DV

D-A

UD

IO(L

)24

24D

VD

-AU

DIO

(R)

2626

DV

D-A

UD

IO(L

)D

VD

-AU

DIO

(R)

TO

DIG

ITA

LS

IGN

AL

PR

OC

ES

SB

LOC

KD

IAG

RA

M

TO

DIG

ITA

LS

IGN

AL

PR

OC

ES

SB

LOC

KD

IAG

RA

M

INP

UT

1

DV

D-A

UD

IO(L

)D

VD

-AU

DIO

(R)

DV

D-S

PD

IF

LRC

LKB

CLK

AD

ATA

1A

CLK

INP

UT

0A

UD

IO-M

UT

E

TO

SY

ST

EM

CO

NT

RO

LB

LOC

KD

IAG

RA

M

TO

SY

ST

EM

CO

NT

RO

LB

LOC

KD

IAG

RA

M

4

1

2

4

1

2

AU

DIO

SIG

NA

L

TO D

VD

D

IGIT

AL

SIG

NA

L

PR

OC

ES

SB

LOC

K

DIA

GR

AM

DV

D M

AIN

CB

A U

NIT

WF

11 WF

13

WF

12

DV

D-S

PD

-EN

WF

7C

N30

06

CN

3006

CN

3003

C7-

SP

DIF

IC30

16

(BU

FF

ER

GAT

E)

IC30

17

(BU

FF

ER

GAT

E)

C7-

SP

D-E

N

IC30

15

(OP

AM

P)

1

67

2A

MP

(R)-

OU

T

AM

P(L

)-O

UT

10-4

4. Digital Signal Process Block Diagram

FL11.11BLD

DIG

ITA

L M

AIN

CB

A U

NIT

IC30

05 (

DIG

ITA

L S

IGN

AL

PR

OC

ES

S)

CN

3005

LLV

1(+

)21

LLV

1(-)

20

LLV

0(+

)23

LLV

0(-)

22

LLV

2(+

)19

LLV

2(-)

18LL

V3(

+)

13LL

V3(

-)12

LLV

4(+

)11

LLV

4(-)

10LL

V5(

+)

9LL

V5(

-)8

LLV

CLK

(+)

16LL

VC

LK(-

)15

TP

6P

OL

5C

PV

4O

E1

3S

TV

1

LVD

ST

X

DIG

ITA

LS

IGN

AL

PR

OC

ES

S

A/D

CO

NV

ER

TER

S-V

IDE

O-Y

-IN

SW

B12 D8

A11

S-V

IDE

O-C

-IN

A8

VID

EO

-IN

B7

CO

M-V

IDE

O-P

r-IN

CO

M-V

IDE

O-P

b-IN

CO

M-V

IDE

O-Y

-IN

A7

B8

C12

DV

D-P

rD

VD

-Pb

DV

D-Y

A12

IF-A

GC

HD

MI-

IN1

HD

MI-

IN2

JK30

03

TM

DS

-D0(

+)

TM

DS

-D0(

-)T

MD

S-D

1(+

)T

MD

S-D

1(-)

TM

DS

-D2(

+)

TM

DS

-D2(

-)

SD

AS

CL

7 9 4 6 1 3 10 12 16 15 7 9 4 6 1 3 10 12 16 15

JK30

04

TM

DS

-D0(

+)

TM

DS

-D0(

-)T

MD

S-D

1(+

)T

MD

S-D

1(-)

TM

DS

-D2(

+)

TM

DS

-D2(

-)T

MD

S-C

LOC

K(+

)T

MD

S-C

LOC

K(-

)S

DA

SC

L

TM

DS

-CLO

CK

(+)

TM

DS

-CLO

CK

(-)

DE

MO

DU

LATO

R/M

PE

G D

EC

OD

ER

AU

DIO

I/F

TO A

UD

IOB

LOC

K D

IAG

RA

MA

MP

(L)-

OU

TA

MP

(R)-

OU

T

C7-

SP

DIF

G1

G2 L2

B1,B

9,C2

,C8,

D1,D

3,D7

,D9,

F1,F

9,G

2,G

8,H1

,H3,

H7,H

9

M2,

M3,

M7,

M8,

N2,N

3,N7

,N8,

P2,P

3,P7

,P8,

R2

(DD

R2

SD

RA

M)

HD

MI

I/F

AU

DIO

DE

CO

DE

R

DIF

-OU

T1

DIF

-OU

T2

IF-A

GC

TO V

IDE

OB

LOC

K D

IAG

RA

M

VID

EO

DE

CO

DE

R

S-V

IDE

O-S

WS

-VID

EO

-SW

B5

AU

DIO

(R)

C4

AU

DIO

(L)

A2

DV

D-A

UD

IO(R

)C

1D

VD

-AU

DIO

(L)

VID

EO

SIG

NA

LA

UD

IO S

IGN

AL

LCD

MO

DU

LEA

SS

EM

BLY

Q30

16B

UF

FE

RB

UF

FE

RQ

3018

A18

A19

B19

B18

A17

B17

A20

B20

C17

D17

D21

E19

E20

D22

C21

C22

F19

F20

D16

Q30

15B

UF

FE

RB

UF

FE

RQ

3020

D15F2 J1F1

AB22

SD

-DQ

(0-1

5)

SD

-A(0

-12)

IC30

02

N4,

P2,

P4,

R1-

R4,

T2,

T4,

U4,

V1,

V4,

W1-

W3

W5,

W7,

AA

4-A

A8,

AB

3-A

B8

AA17

AB17

AA16

AB16

AA15

AB15

AA13

AA12

AA11

AB11

AB12

AB13

AA14

AB14

AB19

Y

19AA

18AB

20AA

19

TP

PO

LC

PV

OE

ST

V

AC

LKA

DAT

A1

BC

LKLR

CLK

M2

L1 M1

L3

10-5

5. Inverter Block Diagram

FL11.11BLINV

INV

ER

TE

R C

BA

CN

1001

P

RO

TE

CT

310

BAC

KLI

GH

T-A

DJ

12V

CO

M2

BA

CK

LIG

HT-

SW

11T

O S

YS

TE

MC

ON

TR

OL

BLO

CK

D

IAG

RA

M(C

N20

1)

T19

50

10 11 14 15

2 3 4 5 7 8

14 3

2 Q19

70

Q19

71IC19

30

14 3

2

IC19

31

Q19

31

TO

PO

WE

RS

UP

PLY

B

LOC

K

DIA

GR

AM

(CN

602)

HO

T

CO

LD

HO

T C

IRC

UIT

. BE

CA

RE

FU

L.

Q19

72

SW

ITC

HIN

GQ

1930

CN

1900

Q19

32

IC10

00

(PW

M C

ON

TR

OL)

BA

CK

LIG

HT

1 2 1 2 1 2

CN

1100

CN

1150

CN

1200

BA

CK

LIG

HT

BA

CK

LIG

HT

T11

00

Q15

51,

Q15

52,

Q15

53

Q10

01

Q10

03

Q12

10

Q12

11

Q11

60

Q11

61

Q11

10

Q11

11

Q15

00

Q18

01,Q

1802

, Q

1803

,Q18

04Q

1800

,Q18

15 Q10

04,

Q10

05

Q15

50T

1150

4 1 3

78 6 5

2 T12

00

DR

IVE

Q15

01,

Q15

02,

Q15

03

DR

IVE

OS

C

PWM

CO

NTR

OL

LOG

IC

VC

C

DC

T

CU

RR

ENT

CO

NTR

OL

SWIT

CH

CU

RR

ENT

CO

NTR

OL

SWIT

CH

OV

ER

VO

LTA

GE

PR

OT

EC

TOR

OV

ER

VO

LTA

GE

PR

OT

EC

TOR

OV

ER

VO

LTA

GE

PR

OT

EC

TOR

OV

ER

VO

LTA

GE

PR

OT

EC

TOR

OV

ER

VO

LTA

GE

PR

OT

EC

TOR

OV

ER

VO

LTA

GE

PR

OT

EC

TOR

Q10

60

OV

ER

VO

LTA

GE

PR

OT

EC

TOR

Q10

61

OV

ER

VO

LTA

GE

PR

OT

EC

TOR

11 8

56

153412 16 2 1

SW

+16

V

SW

SW

+16

V

Q16

00

Q16

21

LC

D M

OD

UL

EA

SS

EM

BLY

T10

50

4 1 3

78 6 5

24 1 3

78 6 5

2 4 1 3

78 6 5

2

BA

CK

LIG

HT

1 2

CN

1050

IC17

00

(CO

MP

AR

AT

OR

) 67

5 2 39 10

18

13 1214

AC

L2

HO

T-G

ND

1

INV

+16

V

10C

N10

03V

CO

M

NO

TE

:T

he v

olta

ge fo

r pa

rts

in h

ot c

ircui

t is

mea

sure

d us

ing

hot G

ND

as

a co

mm

on te

rmin

al.

10-6

6. Power Supply Block Diagram

FL11.11BLP

HO

TC

OL

DP

OW

ER

SU

PP

LY C

BA

HO

T C

IRC

UIT

. BE

CA

RE

FU

L.

Q60

2S

WIT

CH

ING

CO

NT

RO

L

14 3

2

IC60

1

T60

1

TO

INV

ER

TE

RB

LOC

K

DIA

GR

AM

(C

N19

00)

CN

602

3

HO

T-G

ND

1A

CL

2

LIN

EF

ILT

ER

L601

AC

601

AC

CO

RD

BR

IDG

ER

EC

TIF

IER

D60

1- D

604

54

11 14 12 17 18 13 16 15 1997 8

FE

ED

BA

CK

Q60

1S

WIT

CH

ING

Q63

1

CN

201

CN

1001

CN

401

CN

301

Q20

7,Q

208

SW

ITC

HIN

G

Q21

1S

W-8

V

SW

Q40

1

Q20

9,D

204

SW

+16

V

Q90

4,D

906

SW

+3.

3V

Q90

3,D

905

SW

+3.

3V

Q63

5IC

631

+3.

3VR

EG

.2

3

Q63

4

Q63

8,Q

639

Q64

1,64

3S

W+

5V

Q64

0S

W+

5V

Q64

2S

W+

9V

Q50

1S

W+

16V

Q63

7,D

666

SW

+3.

3V

IC90

1+

1.2V

RE

G.

LIN

EF

ILT

ER

L602

4A/1

25V

F60

1 4A

/125

V

P-O

N-H

1TO

SY

ST

EM

C

ON

TR

OL

BLO

CK

DIA

GR

AM

P-O

N-H

2

+5V

RE

G.

PR

OT

EC

T2

DV

D-M

AIN

-PW

R

PR

OT

EC

T1

SW

ITC

HIN

G

AL+

33V

P-O

N+

5V

AL+

3.3V

AL+

13V

TU

NE

R+

5V

P-O

N+

9V

19,2

0

1228,9

21,2

2

13,1

4

LCD

+16

VLC

D-8

V

INV

+16

VV

GH

P-O

N+

3.3V

P-O

N+

3VP

-ON

+7V

AL+

3.3V

P-O

N+

3.3V

P-O

N+

5V

AL+

3.5V

DVD-

ON+

3.3V

EV

+3.

3VD

VD

-ON

+5V

EV

+9V

EV

+1.

2V

INV

ER

TE

R C

BA

DV

D M

AIN

CB

A U

NIT

DIG

ITA

L M

AIN

CB

A U

NIT

13LC

D-8

V13

P-O

N+

3.3V

19,2

0

P-O

N+

3.3V

1210

VG

H10

INV

+16

V2

LCD

+16

V8,

9

AL+

3.3V

21,2

21610

P-O

N+

7V16

P-O

N+

3V10

P-O

N+

5V13

,14

Q21

0Q

201,

Q20

2,Q

212

SW

+24

.5V

Q90

1,Q

902

SW

ITC

HIN

G

1011

,12

6~8

4,59

DV

D-O

N+

5V10

EV

+9V

11,1

2

1A

L+3.

3V1

EV

+3.

3V6~

8

EV

+1.

2V4,

5

DV

D-O

N+

3.3V

9

CN

901

CN

3002

CA

UT

ION

!F

ixed

vol

tage

(or

Aut

o vo

ltage

sel

ecta

ble)

pow

er s

uppl

y ci

rcui

t is

used

in th

is u

nit.

If M

ain

Fus

e (F

601)

is b

low

n , c

heck

to s

ee th

at a

ll co

mpo

nent

s in

the

pow

er s

uppl

yci

rcui

t are

not

def

ectiv

e be

fore

you

con

nect

the

AC

plu

g to

the

AC

pow

er s

uppl

y.O

ther

wis

e it

may

cau

se s

ome

com

pone

nts

in th

e po

wer

sup

ply

circ

uit t

o fa

il.

For

con

tinue

d pr

otec

tion

agai

nst r

isk

of fi

re,

repl

ace

only

with

sam

e ty

pe 4

A, 1

25V

fuse

.C

AU

TIO

N !

:

AT

TE

NT

ION

: U

tilis

er u

n fu

sibl

e de

rec

hang

e de

mêm

e ty

pe d

e 4

A, 1

25V

.4A

/125

V

NO

TE

:T

he v

olta

ge fo

r pa

rts

in h

ot c

ircui

t is

mea

sure

d us

ing

hot G

ND

as

a co

mm

on te

rmin

al.

10-7

7. DVD System Control / Servo Block Diagram

FL11.11BLSD

IC30

1(S

ER

VO

DR

IVE

)

CN

301

M

SLE

D

MO

TO

R

M

SP

IND

LE

MO

TO

R

IC10

1(M

ICR

O C

ON

TR

OLL

ER

)

+ -+ -

+ -+ -

+ -+ - + -

SLE

DM

OTO

RD

RIV

E

FO

CU

SA

CT

UAT

OR

DR

IVE

SP

IND

LEM

OTO

RD

RIV

E

TR

AC

KIN

GA

CT

UAT

OR

DR

IVE

126

LOA

D-D

ISC

SLD

67

SP

DL

66

TR

AC

KIN

GD

RIV

E

127

FO

CU

S D

RIV

EF

S(+

)F

S(-

)

TS

(+)

TS

(-)

LOA

D-D

ISC

1S

P(+

)2

SP

(-)

6LO

AD

-DIS

C3

GN

D4

SL(

-)5

SL(

+)

VR

EF

RE

SE

T70

RE

SE

T

IC46

2

13

+3.

3V

IC20

2(O

P A

MP

)

15 16 14 13 12 11 17 182364 531 225 2427 26

121

SP

-RO

T

124

FD

-OF

ST

123

TD

-OF

ST

RE

SE

T

IC46

1

21

+3.

3V

TO D

VD

DIG

ITA

L S

IGN

AL

PR

OC

ES

S

BLO

CK

DIA

GR

AM

DR

IVE

CB

A

DV

D M

AIN

CB

A U

NIT

122

SL-

AD

S

DIS

C-I

N

12 6

753

3D

VD

-DIS

C-I

N3

2DV

D-DI

SC-O

UT2C

N80

1C

N50

01

DIS

C-O

UT

SE

NS

OR

CB

A

+3.

3V

1LE

D-P

OW

ER

1

Q80

4

63D

VD

-DIS

C-I

N61

DV

D-D

ISC

-OU

T

TO SY

ST

EM

CO

NT

RO

LB

LOC

K D

IAG

RA

M

53D

VD

-SC

LK54

DV

D-C

S

49D

VD

-RE

MO

TE

56D

VD

-SD

ATA

DV

D-S

CLK

DV

D-C

SD

VD

-SD

ATA

DV

D-R

EM

OT

E

LED

-CO

NT

DV

D-D

ISC

-OU

TD

VD

-DIS

C-I

N

77D

VD

-P-O

ND

VD

-P-O

N

65

1

NO

TE

:

Eith

er IC

461

or IC

462

is u

sed

for

DV

D M

AIN

CB

A U

NIT

.

10-8 FL11.11BLDD

C16

D18

A17

B15

DV

D-L

D8

CD

-LD

10

PD

-MO

NI

7

FS

(+)

2F

S(-

)3

TS

(+)

1T

S(-

)4C

N20

1

CN

201

CN

201

IC20

1(S

W)

IC10

1(M

ICR

O C

ON

TR

OLL

ER

)

FS

FS

(+)

CD

/DV

D

FS

(-)

TS

(+)

TS

(-)

TS

DE

TE

CTO

R

CD

/DV

D19

Q25

1,Q

252

CDDV

D

AM

P

Q25

3,Q

254

AM

P

4

13

6

GN

D(C

D-P

D)

5G

ND

(LD

)9

RF

SIG

NA

LP

RO

CE

SS

CIR

CU

IT

DV

D/C

DF

OR

MAT

TE

R

AU

DIO

I/F VID

EO

I/FN

TS

C/P

AL

EN

CO

DE

R

DM

A

BC

U

INS

T.R

OM

32B

ITC

PU

DAT

AR

AM

INT

ER

RU

PT

CO

NT

RO

LLE

RW

ATC

H D

OG

TIM

ER

CP

UI/F

TIM

ER

DE

CO

DE

RI/F

CP

UI/F

RE

AD

ME

MO

RY

DAT

AR

AM

DS

PD

EC

OD

ER

I/O PR

OC

ES

SO

R

INS

T.R

OM

DAT

AR

AM

INS

T.R

OM

SE

RIA

L

D/A

GE

NE

RA

LI/O IN

TE

RR

UP

TC

ON

TR

OLL

ER

TIM

ER

WAT

CH

DO

GT

IME

R

RE

MO

TE

CO

NT

RO

L

32B

IT C

PU

ST

RE

AM

I/F

EX

TE

RN

AL

ME

MO

RY

I/FS

DR

AM

EC

C

UM

AC

100

115

116

113

114

106

104

105

103

62

DE

BU

G

BC

U

INS

TC

AC

HE

DAT

AC

AC

HE

D/A

131

130

Y Pb

DV

D-Y

DV

D-P

b

152

DV

D-S

PD

IF

151

DVD

-AU

DIO

-MU

TE

146

DVD

-AU

DIO

(R)

144

DVD

-AU

DIO

(L)

SD

RA

M A

DD

RE

SS

(0-1

0)

IC10

3(F

LAS

H R

OM

)

FLA

SH

RO

M

29 36 38 45

~ ~

FD

Q (

0-15

)

~

1 9 16 25 48

~

FAD

R (

0-19

)

SD

RA

M D

ATA

(0-1

5)

PIC

KU

P

TO D

VD

SY

ST

EM

C

ON

TR

OL

/ SE

RV

OB

LOC

K D

IAG

RA

M

DV

D M

AIN

CB

A U

NIT

TO V

IDE

OB

LOC

K

DIA

GR

AM

TO A

UD

IOB

LOC

K

DIA

GR

AM

IC50

3(S

DR

AM

)

SD

RA

M D

ATA

(0-1

5)

SD

RA

M A

DD

RE

SS

(0-1

0)19

4

209~

2 13 42 53

~ ~

22 26 29 34

~ ~

159

178~

99 98 97

21~

3034

~42

212

1~4

7~14

17~

1821

5 2

16

AU

DIO

D/A

CO

NV

ER

TE

R

D/A

129

Pr

DV

D-P

r

GN

D(D

VD-P

D)

6

VID

EO

SIG

NA

LA

UD

IO S

IGN

AL

TO

SY

ST

EM

CO

NT

RO

LB

LOC

KD

IAG

RA

M

8. DVD Digital Signal Process Block Diagram

11-1 FL11.11SC

SCHEMATIC DIAGRAMS / CBA AND TEST POINTS

Standard Notes

WARNING

Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts that have these special safety characteristics are identified in this manual and its supplements; electrical components having such features are identified by the mark “#” in the schematic diagram and the parts list. Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement parts that do not have the same safety characteristics as specified in the parts list may create shock, fire, or other hazards.

Notes:1. Do not use the part number shown on these

drawings for ordering. The correct part number is shown in the parts list, and may be slightly different or amended since these drawings were prepared.

2. All resistance values are indicated in ohms (K = 103, M = 106).

3. Resistor wattages are 1/4W or 1/6W unless otherwise specified.

4. All capacitance values are indicated in µF (P = 10-6 µF).

5. All voltages are DC voltages unless otherwise specified.

6. This schematic diagrams are masterized version that should cover the entire FL11.11 chassis models.Thus some parts in detail illustrated on this schematic diagrams may vary depend on the model within the FL11.11 chassis.Please refer to the parts lists for each models.

7. The Circuit Board layout illustrated on this service manual is the latest version for this chassis at the moment of making this service manual. Depend on the mass production date of each model, the actual layout of each Board may differ slightly from this version.

11-2 FL11.11SC

LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES:

1. CAUTION:CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE.

ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V.

2. CAUTION: Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit. If Main Fuse (F601) is blown, first check to see that all components in the power supply circuit are not defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components in the power supply circuit to fail.

3. Note:1. Do not use the part number shown on the drawings for ordering. The correct part number is shown in the

parts list, and may be slightly different or amended since the drawings were prepared.

2. To maintain original function and reliability of repaired units, use only original replacement parts which are listed with their part numbers in the parts list section of the service manual.

4. Voltage indications on the schematics are as shown below: Plug the TV power cord into a standard AC outlet.:

5. How to read converged lines

6. Test Point Information

2 31 5.0< 0 >

TV mode DVD mode

Unit: Volts

5.0

The same voltage forboth TV & DVD modes

Unit: Volts

Indicates that the voltageis not consistent here.

3

2

1

A B C D

1-B1

1-D3

AREA D3

AREA B1

1-D3

Distinction AreaLine Number (1 to 3 digits)

Examples:1. "1-D3" means that line number "1" goes to the line number "1" of the area "D3". 2. "1-B1" means that line number "1" goes to the line number "1" of the area "B1".

: Indicates a test point with a jumper wire across a hole in the PCB.

: Used to indicate a test point with a component lead on foil side.

: Used to indicate a test point with no test pin.

: Used to indicate a test point with a test pin.

The reference number of parts on Schematic Diagrams/CBA can be retrieved by application search function.

11-3

GD

S

TK5A50DQ601

2SC2120-OQ602

4

3 2

1

IC601LTV817MCF

D611

0.027/100V

C609

0.082/100V

C612

470P/2KV

C611

1000P/250VC691

1HOT-GND

CN6022ACL

BEADBC601

OPENC610

D609

1200P/100V

C613

FR154D631

2SD400Q209

C2210.01

D203

SB360BHD646

FR104-BD643

0.1C682

2200P/1KVC637

FR154D638

KTA1267-GR-AT/PQ207

KTC3198-Y-AT/PQ208

2SA950-OQ636

FR154D661

D650

KTC3198-Y-AT/PQ631

FR154D662

KTC3198-Y-AT/PQ634

SB140D648

2200P/100VC646

D208

KTC3198-Y-AT/P

Q211

2SC4881FQ637

FR104-BD632

C651OPEN

0.1C683

KTC3198-Y-AT/P

Q639

KTA1267-GR-AT/PQ638

FR151-B/PD633

SB390D642

OPENC641

KTC3198-Y-AT/PQ642

D410

KTC3198-Y-AT/PQ402

2SC2120-YQ643

KTC3198-Y-AT/P

Q401

D411

OPENC692

D404

KTC3198-Y-AT/PQ635

39BSB-T26D612

OPEND610

4V7BSB-T26D664

4V3BSB-T26D607

27BSB-T26D606

6V8BSA-T26D659

10BSB-T26D644

1ZB43BBD639

3V3BSB-T26D658

8V2BSB-T26D210

10BSB-T26D670

10BSB-T26D407

24BSB-T26D635

5V6BSB-T26D652

2.7KR229

10R687

1R651

15KR410

11KR232

47KR240

1.5KR639

22KR404

1.8KR663

1KR648

27R243

OPENR406

22KR241

3.6KR679

12KR242

1KR669

910R233

2.2KR234

2.7/1WR227

22KR225

22KR673

1.2KR637

3.3kR223

6.8KR680

10KR675

33KR411

1.2KR689

1.5KR638

180R646

100KR659

1R666

820R644

47KR403

100KR676

6.8KR650

22KR407

270R677

2.7KR228

390KR605

0.39/2W

R614

180R616

390KR604

390KR606

2.7KR615

1KR674

150R610

150R611

1.8KR664

24KR652

WIRER694

10R678

WIRER672

620R668

47KR405

1.5KR231

15R662

1.2KR613

22KR226

390KR618

27KR224

1000/6.3VC652

220/10VC654

220/50VC638

100/10VC648

470/25VC222

10/50VC224

2200/6.3VC633

1000/35VC639

100/16VC656

22/50VC657

1000/25VC631

1/50VC642

3300/16V

C644

D666KIA431-AT/P

D204KIA431-AT/P

1.8/5WR602

0.47/300VC602

4A/125VF601

OPENR603

OPENC603

SURGEABSORBER

SA601

OPENC604

AC CORDAC601

0.47/300VC601

1.8/5WR617

1N5406-BPD602

JS60

3

L601LINE FILTER

1N5406-BPD603

JS60

4

JS60

2

1N5406-BPD601L602

LINEFILTER

JS60

1OP

EN

OPEN

OPEN

OPEN

560K/1/2WR601

1N5406-BPD604

OPENR607

680/200V

C605

OPENC694

1000P/250VC693

OPEND608

SB390D641

OPEND653

WIRER653

10KR658

1KR654

WIRER665

270R645

D649

10R688

WIRED671

D40910KR408

2200/6.3VC645

SB240-B/PD647

WIRER671

WIRER670

OPENC650

D421

D419

OPEND640

JS631 OPENC640

390/1/2W

R661

1/50VC647

33BSB-T26D657 D412

3.3/1WR696

WIRER667

33R695

OPENR409

OPENC402

WIRED665

22KR401

22KR402

39BSB-T26D209

D211

2SC2120-YQ501

OPEND673

D660

3.3/2WR247

10R501

100/25VC501

2SC2120-YQ641

2.7R692

2.7R691

WIRER693

22R685

D645KIA431B-AT/P

1.1KR641

10KR642

10KR643

1KR686

OPENC655

2.7R682

2.7R683

2SC2120-YQ640

220/10VC653

D415

1000/10VC634

SB240-B/PD634

KTC3198-Y-AT/PQ210

270R235

33R236

30BSD-T26D205

D206

150R238

OPENR239

8.2KR237

22/50VC223

D207

AL+33VTUNER+5V

P-ON+3.3V

LCD+24.5VLCD-8V

INV+16VLCD+16V

AUDIO(L)-OUTAUDIO(R)-OUT

AMP(L)-OUTAMP(R)-OUT

28 BACKLIGHT-ADJ27 LED1

12 GND

15 PROTECT2

25 REMOTE

4 AUDIO(R)-OUT

20 P-ON+3.3V

2 AUDIO(L)-OUT

14 P-ON+5V

CN3011 P-ON-H2

11 PROTECT1

3 GND

29 VCOM-PWM

10 P-ON+3V

26 BACKLIGHT-SW

18 GND

13 P-ON+5V

9 P-ON-H1

23 GND

6 AMP(L)-OUT

22 AL+3.3V

17 GND16 P-ON+7V

19 P-ON+3.3V

21 AL+3.3V

24 OE2

5 PROTECT3

7 GND8 AMP(R)-OUT

BACKLIGHT-SW

P-ON-H1OE2

BACKLIGHT-ADJVCOM-PWM

PROTECT3

AL+3.3VP-ON+9V

M+13V

P-ON+9V

P-ON+3.3V

RESET

AL+3.3V

P-ON+5V

P-ON+9V

PROTECT2

P-ON+5V

AL+13V

REMOTELED1

D+5.5V

0.1C684

D4130.1C681

D414

D416

D420

3V9BSB-T26D417

3V9BSB-T26D418

D405

10KR412

15BSB-T26D4068.2K

R245

1N4005D655

AUDIO SIGNAL

3

4

5

7

8

11

14

12

17

18

13

16

15

199

POWER TRANST601

220/25VC632

4A 125V

VOUT

GND

VIN

1 2 3

LD1117VIC631

LCD-P-SAFETY

AL+6V

LCD+16VPROTECT1

CN6012AC120V1AC120V

2.2/50VC676

OPEND651

OPENR244

OPEND403

OPEND401

OPENC225

OPEND674

OPEND402

OPENR690

OPENR681

OPEND667

OPENQ633

OPENR698

OPENR684

OPENQ644

OPENR649 OPEN

C643

OPENR647

2.7/1/2WR636

WIRER660

AC CORD

WIRED676

56R699

SB160D637

3.3/1WR697

2

1

3

4

A B C D E F

POWER SUPPLY CBA

ERRORVOLTAGE DET

(SWITCHING)

SWITCHINGCONTROL

HOT COLD

HOT CIRCUIT. BE CAREFUL.

134.5

0.1

5.3

0

0.5

14.3

0.5

5.3

19.4 15.8

16.4

(SWITCHING)

33.8

33.1

0.1

33.7

0.7

0

33.6

32.5

5.7 0.2 (SWITCHING)

6.3

00.7

(+3.3V REG.)

32.5(SWITCHING)

(SW+9V)

9.012.7

9.7

(SW+5V)

6.8 5.3

6.0

(SWITCHING)

2.5-0.7

0

(FEED BACK)

(+3.3V REG.)

(SW+16V)

(RESET)

(SW-8V)

(SW+3.3V)

(+5V REG.)

33.8

6.2

6.7

5.1

3.4

4.1

-7.9

-8.6

-8.6

-3.9

0

3.1

6.9

6.1

6.8

(SWITCHING)

(SWITCHING)

TO INVERTERCBA CN1900

(SW+16V)

(SW+5V)(SW+5V)

UNLESS OTHERWISE SPECIFIED:DIODES ARE 1SS133.

CONTINUEPOWER 2

CONTINUEPOWER 4

CONTINUEPOWER 4

CONTINUEPOWER 2

TO DIGITAL MAINCBA UNIT CN3002

CONTINUEPOWER 4

CONTINUEPOWER 3

CONTINUEPOWER 2

CONTINUEPOWER 4

(SW+24.5V)

19.4 15.8

16.4

30.2 24.425.1

0

0.20

6.0

6.7 5.3

6.0

6.8 5.3

5.1

5.15.8

2.1 3.4 5.1

0.8

3.32.6

02.63.32.6

02.63.23.12.5

05.35.3

06.9

00

3.4

3.30

0.63.33.20.60.9

3.43.4

WITH DVD

FL11.11SCP1

Power Supply 1 Schematic Diagram

NOTE:The voltage for parts in hot circuit is measured usinghot GND as a common terminal.

CAUTION !Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.If Main Fuse (F601) is blown , check to see that all components in the power supplycircuit are not defective before you connect the AC plug to the AC power supply.Otherwise it may cause some components in the power supply circuit to fail.

For continued protection against risk of fire, replace only with same type 4 A, 125V fuse.

CAUTION ! :

ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.4A/125V

11-4

2SP(R)+

CN8021SP(R)-

12111 54 8 103 7 92 6

42 2738 34 3043 28 2439 35 3144 2940 2536 3241 2637 33

1814 211915 2016 1713 22

23

DRIVE2PWM2

DRIVE1PWM1MUTECONTROL

CLOCK CONTROL

RAMPGENERATOR

PROTECTIONS& LOGIC

POWER LIMIT

IC801BD5426EFS-E2

1C801

3.3KR8142700P

C835

10KR813

1C834

27KR802

11K

R803

11K

R804

0.1C802

10/50VC827

1000/25VC823

0.1C804

1000PC805

1C803

33uHL801

2SP(L)+

CN8011SP(L)-SP801

SPEAKERL-CH

470PC838

20BSB-T26D801

BC802BEAD 0.1

C809470PC839

20BSB-T26D802

BC803BEAD

33uHL802

0.1C810

1C806

1000PC808

0.1C807

4.7KR806

1SS133D806

0.1C847

KTC3198-Y-AT/P

Q80222KR820

KTC3198-Y-AT/P

Q801

10KR818

AUDIO-MUTE

100KR817

OPENR812

0.1C833

3.3/50VC832

OPENR811

SP802SPEAKERR-CH BC804

BEAD

BC805BEAD

470PC845

20BSB-T26D804 0.1

C829470PC846

20BSB-T26D803

33uHL804

33uHL803 1000P

C8260.1C825

1000PC822

0.1C821

0.47C811

0.47C830

1C824

1C820

BC801BEAD

1C817

10/50VC816

1C836

10KR815

1C815

3.3KR816

0R810

2700PC837

82R308

0.22uHL303

47PC311

DIF-OUT1

82R309

47PC310

0.22uHL302

DIF-OUT2

0R310

IF-AGC

0.47C309

JS303

OPENL301

JS302

0.1C305

1/50VC306

0R3070R302SDASCL

0R3060R303

9 DVD-DISC-IN

14 GND

2 KEY-IN2

8 DVD-SDATA

22 DVD-Y

12 GND

18 DVD-Pr

7 DVD-REMOTE

21 GND

15 DVD-DISC-OUT

5 DVD-MAIN-PWR

11 DVD-CS

20 DVD-Pb

17 GND

19 GND

13 DVD-SCLK

10 GND

CN3031 GND

4 P-ON-H3(NU)

16 LED-CONT

23 GND

6 DVD-P-ON

3 DVD-LED

24 DVD-AUDIO(L)25 DVD-AUDIO-MUTE26 DVD-AUDIO(R)27 GND28 DVD-SPDIF29 GND

23 DVD-DISC-IN

3 DVD-DISC-OUT

19 GND

21 DVD-SCLK

5 EV+1.2V

11 EV+9V

CN9011 AL+3.3V

8 EV+3.3V

20 PWRCON(NU)

17 GND

9 DVD-ON+3.3V

6 EV+3.3V

26 DVD-P-ON

2 LED-CONT

13 GND

7 EV+3.3V

22 DVD-CS

14 GND

16 GND15 GND

24 DVD-SDATA25 DVD-REMOTE

18 GND

12 EV+9V

4 EV+1.2V

10 DVD-ON+5V

8 GND

CN9021 DVD-Pr

10 DVD-AUDIO-MUTE11 DVD-AUDIO(R)

3 DVD-Pb

6 GND

13 DVD-SPDIF

4 GND5 DVD-Y

2 GND

7 GND

12 GND

9 DVD-AUDIO(L)

91R901

91R902

91R903

VOUT

GND

VIN

1 2 3

KIA1117API00/T0-220IC901

0.3R911

0.3R910

1000/6.3VC916

3.3/1/2W

R9132.7/1/2W

R914

Q9012SA950-O

10KR918

KTC3198-Y-AT/P

Q902

390R917

1KR912

10KR916

10KR915

2SC2120-YQ903

150R919

3.3KR920

10KR921

22R922

D905KIA431-AT/P

3.9R925

3.9R924

220R923

KTC3198-Y-AT/PQ904

100/10VC918

470R926

10R927

3V9BSB-T26D906

180R928

47/25VC919

1.2R929

1N4005D909

1N4005D901

1N4005D902

1N4005D903

WIRER909

KEY-IN2DVD-LED

GND

VCCIC951NJM4558M(TE1)

1 2 3 4

5678

12KR959

220PC959

39KR957

2.2C957

100R951

1C953

100KR953

100KR954

220PC960

12KR960

39KR958

2.2C958

100R952

100KR955

100KR956

1C954

2200PC906

2200PC907

0.1C952

100/10VC951

WIREL901

100R906

AMP(R)-OUTAMP(L)-OUT

M+13V

P-ON+9V

AL+3.3V

P-ON+5V

PROTECT2

AL+13V

D+5.5V

AL+33VTUNER+5V

1.3KR905

1.3KR904

WIREL951

1SS133D907

TU301 TUNER UNIT

12

DIF-OUT2

13

DIF-OUT1

14

IF-AGC

15

VCC

16

NU

17

NU

18

NU

19

NU

1

NU

2

NU

3

NU

4

VCC

5

NU

6

+32V

7

GND

8

SDA

11

NU

9

SCL

10

NU

TU301 TUNER UNIT

1

NU

2

NU

3

NU

4

SCL

5

SDA

6

+32V

7

+5V

8

NU

11

DIF-OUT1

9

IF-AGC

10

DIF-OUT2

220/6.3VC917

22KR819

0.1C828

0.1C818

10/50VC819

BC301WIRE

WF13

WF10

WF9

WF8

WF11

WF12OPENC904

OPENC903

OPENC902

OPENC901

OPENC905

OPENC913

OPENC912

OPENC955

OPENC956

OPENR908

OPENR907

LCD+16VPROTECT1

OPENR805

OPENC814

OPENR808

OPENC813

OPENR809

OPENC914

OPENC911

OPENC910

OPENC915

OPENC909

OPENC908

OPEND408

OPENR930

OPENQ905

OPENR931

OPEND807

OPEND908

FR104-BD904

OPENC308

OPEND302

OPEND301

OPENC307

OPENC304JS301 OPEN

D303

OPENOPENR311

OPENR305

OPENR304

0.1C302

330/10V

C303 OPENC301

OPENR301

JS304WIRE

LKJIHG

4

3

1

2

POWER SUPPLY CBA

(AUDIO-MUTE)

(AUDIO AMP)

CL801

GND GND NU NU

(AUDIO-MUTE)

CL802

GND GND

3.6

(+1.2V REG.)

0

(OP AMP)

CONTINUEPOWER 1

CONTINUEPOWER 1

CONTINUEPOWER 1

CONTINUEPOWER 4

CONTINUEPOWER 3

TO DVD MAINCBA UNIT CN401


TO DVD MAINCBA UNIT CN601

(SWITCHING)

(SWITCHING)

(SW+3.3V)

(SW+3.3V)

5.04.3

5.1

0.1

0

0.8

3.4

4.1

4.6

3.4

4.1

5.0

0.1

0

7.00

0

7.0

0 1.3 4.0

3.33.4

0

3.4

3.43.43.43.4

000000

1.31.3

9.75.3

9.7

0.52.53.42.52.80.5

0

2.5

0.9

0.6

0.6

0

0

0.9

3.4

3.2

3.4

3.43.3

02.8

02.5

0

2.50

0

00.9

0

0.90

0.6

1.70

4.60.24.6

0

0.21.6

0

1.60

1.7

0

0 06.1 5.40 6.1 5.14.1 6.1 8.83.6 6.10

03.6 5.0 3.62.1 06.13.6 7.16.1 0

13.0 18.1 12.9 12.9 12.912.9 18.0

18.0 12.9 12.9 12.912.96.1 6.1 18.1

9.0 4.5 4.5 4.5

04.6 4.5

*Either TU301 is used for Power Supply CBA.

**

FL11.11SCP2


11-5

JK733

JK732

JK731

JK742

JK741

JK751

YC

SW

JK754

JK752

JK753

39PC731

100PC752

100PC751

39PC733

100PC753

39PC732

75R751

75R753

0R757

10R734

10R735

75R731

15KR743

39KR746

15KR744

39KR761

10R736

0R758

75R732

39KR762

39KR745

15KR760

75R733

0R756

75R752

15KR759

10KR775

KTC3198-Y-AT/PQ772

10KR774

10KR772

10KR773

13

VEE

VDD1

152

14

16

3

6

5

11

4

7

12

10

8 9GND

INH

SWCTL

IC771TC4052BF(ELNF)

KTC3198-Y-AT/PQ771

100PC776

100KR779

100KR777

100KR776

100PC775

WIRER771

0.1C772

39KR725

OPENR713

39KR726

15KR723

JK721

JK722

OPENR714

15KR724

JK711

OPENR716

OPENR715

1C841

JK841 220R844

110R843

1C842

0.01C843

10/50VC844

KTC3198-Y-AT/PQ841

2 SPDIF

5 S-VIDEO-SW

AUDIO-MUTEKEY-IN1

BEADBC841

100KR778

R795

R791R790

R794

R789

R793

R788

R792

R780

R784

10KR781

R785

R782

R786

R783

R787

100/16VC771

10KR763

4.7KR847

4.7KR848

OPENR711

OPENC701

OPENC703

OPENR712

OPENC702

OPENC704

2.2C723

2.2C724

2.2C743

2.2C744

0C754

0C755

CL701B1 S-VIDEO-Y-IN

CL701A1

2 S-VIDEO-SW 233 S-VIDEO-C-IN

0C756

4 GND

6 GND

8 GND

4

6

8

5 VIDEO-IN 5

7

9

2.2C757

2.2C758

7 AUDIO(L)-IN

9 AUDIO(R)-IN

DIF-OUT1

SCL

DIF-OUT2

AUDIO-MUTE

SDAIF-AGC

P-ON+5VRESET

P-ON+9VP-ON+3.3V

CN3021 GND

3 GND4 VIDEO-IN

6 S-VIDEO-C-IN7 GND8 S-VIDEO-Y-IN9 GND10 INPUT111 AUDIO(R)12 INPUT013 AUDIO(L)14 GND15 COM-VIDEO-Y-IN16 GND17 COM-VIDEO-Pb-IN18 GND19 COM-VIDEO-Pr-IN20 AUDIO-MUTE21 SDA22 SCL23 RESET24 IF-AGC25 GND26 DIF-OUT127 GND28 DIF-OUT229 KEY-IN1

WF2

WF7

WF5

WF1

WF4

WF3

WF6

OPENC773

OPENR845

OPENR841

OPENR721

OPENR722

OPENR741

OPENR742

OPENC721

OPENC722

OPENC741

OPENC742

OPENC761

OPENC762

OPENR754

OPENR755

COMPONENT-Y-IN

COMPONENT-Pb-IN

COMPONENT-Pr-IN

COMPONENT-AUDIO(L)-IN

COMPONENT-AUDIO(R)-IN

AUDIO(L)-IN

AUDIO(R)-IN

VIDEO-IN

S-VIDEO-IN


(INVERTER)

0

0.2

0

(INVERTER)

4.5

0.2

9.0

9.0

0

0

4.5 0.2

0

0

4.5

0

9.0

4.5

9.0

9.0

0.2

HDMI-AUDIO(L)-IN

HDMI-AUDIO(R)-IN

DIGITALAUDIO-OUT(COAXIAL)

(BUFFER)

POWER SUPPLY CBA

PC-AUDIO-IN

5.3

2.0

2.6

QPONM

4

3

1

2

R

0

0

JACK CBA

CONTINUEPOWER 2

CONTINUEPOWER 1

CONTINUEPOWER 4

(AUDIO SELECTOR)

3.4

0

0

0

0

0

0

0

0

0

3.3

0

0

00

4.5

4.5

1.0

0

3.3

0

1.7

0.2

0

0

0

0

0

3.3

OPENOPENOPEN OPEN

OPEN OPEN OPEN OPEN

OPENOPENOPENOPEN

OPEN OPEN OPEN OPEN

FL11.11SCP3

Power Supply 3 & Jack Schematic Diagram

11-6

GND


1 2 3 4

5678

20KR891

100PC875

16KR879

2.2C884

100R881

100KR885

100KR883

100PC876

20KR892

16KR880

2.2C885

100R882

100KR886

100KR884 6800P

C878

6800PC877

0.1C879

100/16VC880

2.2C882

2.2C883

WIREL871

2.2C874

100KR874

JK872

3300PC872

560R872

100KR873

560R871

JK871

3300PC871

KTA1267-GR-AT/P

Q874

1KR888

22KR887

2.2C873

1KR877

1KR878

KTC3198-Y-AT/PQ872

KTC3198-Y-AT/PQ871

KTC3198-Y-AT/PQ873

22KR893

1000PC216

OPENC214

10KR218

OPENC212

1C218

0.1C217

100KR213

0.1C201

KTC3198-Y-AT/PQ205

10KR216

OPENC213

10R210

OPENC215

KTC3198-Y-AT/PQ203

1 2 3 4

5678VCC

VEE

IC201TL3472CDR

1R208

Q204KTA1267-GR-AT/P

15KR219

10R212

1KR220

47/25VC219

1.5KR217

VCOM 14

5BACKLIGHT-SW4BACKLIGHT-ADJ

LCD+16V 9

GND 76PROTECT3

P-ON+3.3V 12GND 11VGH 10

CN201GND 1

3GND

LCD-8V 13

GND 15

INV+16V 2

LCD+16V 8

22/25VC210

0.1C203

0.1C202

KTC3198-Y-AT/PQ202

D2021SS133

1KR206

390R204

100KR207

OPENR203

100KR201

0.1C207

1KR202

Q201KTA11267-GR-AT/P

OPENC208

OPENC209

OPENR205

2.2/50VC204

KTC3198-Y-AT/PQ212

10KR248

6KEY-IN1

CN1011GND

4LED1

7KEY-IN28DVD-LED

3AL+3.3V2REMOTE

5P-ON-H1

JS101

KTC3198-Y-AT/PQ172

KTC3198-Y-AT/PQ171

22KR172

22KR175

22KR171

OPENR173

R174

LCD+24.5VLCD-8V

INV+16VLCD+16V

P-ON+3.3V

AUDIO(L)-OUTAUDIO(R)-OUT

BACKLIGHT-SW

P-ON-H1OE2

BACKLIGHT-ADJVCOM-PWM

PROTECT3

REMOTELED1

AL+3.3VP-ON+9V

DVD-LEDKEY-IN2

KEY-IN1AUDIO-MUTE

OPENR821

JS102

AL+6V

OPENC206

OPENR215

JS201

OPENR221

LCD-P-SAFETY

OPENC220

OPENR222

OPENQ206

R249

JS202

C675

D675WIRE

XWVUTS

4

3

1

2

POWER SUPPLY CBA

0

(OP AMP)

(MUTE DRIVE)

(AUDIO-MUTE)

(SWITCHING)

(V-COM DRIVE)

(COMPARATOR)

(V-COM DRIVE)

(V-COM DRIVE)

TO INVERTER CBA CN1001

(SWITCHING)

(SWITCHING)

TO IR SENSORCBA CL101B

(SWITCHING)

(SWITCHING)

CONTINUEPOWER 1

CONTINUEPOWER 1

CONTINUEPOWER 1

CONTINUEPOWER 1

CONTINUEPOWER 2

CONTINUEPOWER 3

AUDIO(L)-OUT

AUDIO(R)-OUT

(SWITCHING)

(AUDIO-MUTE)

0

2.0

-1.5

0

0

6.8

3.4

23.9

24.4

0.4

0.7

6.8

0.6

0.3

0

6.9

-1.5

19.1

0

1.2

0

3.4

3.4

5.9

0

0

22.0

6.9

0.1

-1.6

15.8

0

0.6

0

0

0

0

4.5

0.2

4.5

0.2

6.8

4.5

6.87.1

4.5

4.5

15.8

0 0

4.5

9.0

OPEN

OPEN

OPEN

OPEN

OPEN

FL11.11SCP4


11-7

V+

V-141312111098

27 45 3 16

IC1700BA10324AF-E2

KTC3198-Y-AT/P

Q1621

4

3 2

1

IC1930LTV817MCF

4

3 2

1

IC1931LTV817MCF

KTC3198-Y-AT/PQ1971

KTC3198-Y-AT/PQ1972

820P/1KVC1990

31DF4-FCD1990

D1973

KTC3198-Y-AT/PQ1931

OPENC1934

0.1/100V

C1933

D1940

CN19002ACL

8

7

3

4

2

14

10

11

5

15

T1950POWER TRANS

1HOT-GND

2200P/250VC1905

C1940

0.027/100V

C1932

OPENC1906

2SC2120-YQ1932

D1933

820P/2KV

C1930

1000P/100V

C1931

D1932

KTC3200-GR-AT/PQ1970

0.047/100V

C1970

0.01C1981

30KR1976

82R1933

30KR1975

82R1932

180R1934

47R1930

820KR1987

1KR1986

R1946

47KR1931

220KR1941

360R1980

27KR1977

R1948

0.33/2WR1937

1.5KR1935

330KR1943

1KR1988

2.2KR1939

390KR1945

270R1970

2.7KR1982

220KR1940

330KR1944

120KR1942

R1947

180R1936

6.8KR1979

5V6BSB-T26D1970

5V6BSB-T26D1931

27BSB-T26D1930

39BSB-T26D1934 OPEN

D1935

OPENC1983

470/100V

C1992

270/200V

C1910

100/100VC1052

0.01C1068

D1071

390R1068

KTC3198-Y-AT/PQ1061

D1062 KTC3198-Y-AT/PQ1060

10/50VC1067

15P/6.3KVC1061

D1067D1060

1500PC1066

D1064

D1063

D1066

18KR1063

8.2KR1070

0.01C1064

27KR1071

8.2KR1064

15P/6.3KVC1065

D1061

390R1062

D1070

27KR1065

1500PC1062

D1068

10/50VC1063

18KR1069

D1065

D1069

100KR1060

20KR1061

D1073

100KR1066 D1074

D1072

20kR1067

CN105021

D1114

1500PC1112

20kR1117

D1119

20KR1111

390R1118

D1111

D1110

100KR1110

0.01C1114

D1120

15P/6.3KVC1111

D1121

D1112

18KR1119

D1113

27KR1115

KTC3198-Y-AT/PQ1110

D1118

8.2KR1120

D1122

390R1112

8.2KR1114

D1116

CN11002

1500PC1116

D1115

10/50VC1113

27KR1121

15P/6.3KVC1115

D1117

D1123

D1124KTC3198-Y-AT/PQ1111

10/50VC1117

0.01C1118

100KR1116

1

18KR1113

D1164

1500PC1162

20kR1167

D1169

20KR1161

390R1168

D1161

D1160

100KR1160

0.01C1164

D1170

15P/6.3KVC1161

D1171

D1162

18KR1169

D1163

27KR1165

KTC3198-Y-AT/PQ1160

D1168

8.2KR1170

D1172

390R1162

8.2KR1164

D1166

CN11502

1500PC1166

D1165

10/50VC1163

27KR1171

15P/6.3KVC1165

D1167

D1173

D1174KTC3198-Y-AT/PQ1161

10/50VC1167

0.01C1168

100KR1166

1

18KR1163

D1214

1500PC1212

20kR1217

D1219

20KR1211

390R1218

D1211

D1210

100KR1210

0.01C1214

D1220

15P/6.3KVC1211

D1221

D1212

18KR1219

D1213

27KR1215

KTC3198-Y-AT/PQ1210

D1218

8.2KR1220

D1222

390R1212

8.2KR1214

D1216

CN12002

1500PC1216

D1215

10/50VC1213

27KR1221

15P/6.3KVC1215

D1217

D1223

D1224KTC3198-Y-AT/PQ1211

10/50VC1217

0.01C1218

100KR1216

1

18KR1213

OPENC1991

OPENR1974

3.9KR1971

3.9KR1969

3.9KR1968

3.9KR1967

1ZB100BBD1994

33KR1983

15KR1984

0.47/50VC1982

1MR1072

0.1C1072

1MR1122

0.1C1122

1MR1172

0.1C1172

1MR1222

0.1C1222

GND 5

GND 9

12BACKLIGHT-ADJ11BACKLIGHT-SW

VCOM 2

INV+16V 14

VGH 6

10PROTECT3

13GND

CN1001GND 15

LCD+16V 8LCD+16V 7

P-ON+3.3V 4LCD-6.8V 3

GND 1

GND 9

GND 5

LCD+16V 3

VCOM 10

VGH 4

LCD+16V 2

P-ON+3.3V 6

LCD-6.8V 8

CN1003GND 1

BC1931BEAD

BC1930BEAD

P-ON+3.3V 7

GND 11

68KR1972

100/100VC1056

100/100VC1053

D1700

D1701

D1702

D17030.22C1702

2SC2120-YQ1501

2SA950-OQ1502

470P/2KVC1550

470P/2KVC1500

33KR1041

10R1501

20BSB-T26D1500

12KR1500

R162110K 1000P

C1620

100KR1620

KTC3198-Y-AT/P

Q1600 R160110K OPEN

C1601

18KR1600

0.1C1600

OPENC15010.01

C1502

KTC3198-Y-AT/P

Q1503

150R1502

2.2KR1503

3900P/100V

C1012

12KR1043

0.47C1040 OPEN

R1042

220KR1005

0.1C1004

56KR1006

10KR1007

82KR10092.2K

R1008

15BSB-T26

D1000

1KR1701

9.1KR1700

0.22C1703

36BSB-T26D1040

0.39/2W

R10400.39/2W

R1044

20BSB-T26D1550

10R1551

12KR1550OPEN

C1551

150R1552

2SC2120-YQ1551

2SA950-OQ1552

2.2KR1553

100KR1811

KTC3198-Y-AT/P

Q1553

0.01C1552

1KR1505

2.2KR1504

1KR1506

1KR1555

2.2KR1554

3.3KR1023

220R1026

22KR1080

OPENR1027

KTC3198-Y-AT/PQ1001

36KR1028

KTC3198-Y-AT/PQ1003

15KR1031

22KR1030

0.1C1011

D1003

5.6KR1081 24K

R1032WIRED1004

10KR1021

0.1C1008

R103610K

KTC3198-Y-AT/P

Q1005 10KR1034

4.7KR1810

KTC3198-Y-AT/P

Q1802

1.5KR1809

10BSB-T26D1801

1KR1807

5.1KR1808

0.1C1802

100/25VC1800

WIRED1802

10KR1630

D1630

3.3KR1631

12KR1812

KTC3198-Y-AT/P

Q1804

KTC3198-Y-AT/P

Q1803

22KR1802

22KR1806

1.2R1804

1KR1805

4.7KR1803

KTC3198-Y-AT/PQ1800

10KR1800

22/35VC1801

22KR1801

0.1C1001

0.1C1013

0.01C1002

22KR1001

1KR1002

100KR1003

0.1C1003

0R1004

4.7KR1014

7.5KR1015

120KR1016

10KR10170.1

C1006

100KR1024

OPENR1025

D1006

2.2KR1022

6800PC1014

KTA1267-GR-AT/P

Q1004

10KR1033

WIRER1019

2.2KR1018

WIRED1005

0.1C1007

WIRED1001

12KR1012

10KR1011

0R1010

0.1C1005

OPEND1961

OPEND1960

WIREBC1301

0R1981

100/25VC1009

2SA950-OQ1815

KTA1267-GR-AT/PQ1801

HZZS33NB2TE-EQD1971

22KR1973

1KR1556

9

1 8

16

2

11

4 6

15 10

3

1214

5

13

7

PWMCONTROLLOGIC

DRIVE

GND

VCCCTLV-REF

DRIVEOSCDTC

IC1000TL494CDR

2SK2417Q1550

G

SD

2SK2417Q1500

G

SD

TK8A50DQ1930

G

S

D

R10353.3K

T1050INVERTER TRANS

2

1

4

3 5

6

7

8

T1100INVERTER TRANS

2

1

4

3 5

6

7

8

T1150INVERTER TRANS

2

1

4

3 5

6

7

8

T1200INVERTER TRANS

2

1

4

3 5

6

7

8

BC1500BEAD

BC1550BEAD

BC1551BEAD

BC1501BEAD

OPENR1020

OPENC1010

OPEND1002

OPENC1000

OPENR1045

D1972

OPENC1054

OPENC1204

OPENC1205

OPENC1055

OPEND1050

OPENC1050

OPENR1050

OPENR1051

OPEND1051

OPENC1051

GND5

P-ON+3.3V7

VGH4

LCD-6.8V8

LCD+16V2LCD+16V3

GND11

P-ON+3.3V6

VCOM10GND9

CN1005GND1

330KR1991330KR1990

330KR1989

B

2

EA

4

F

1

3

C D

BACKLIGHT

0.4

(COMPARATOR)

0.4

15.7

0

0.4

2.5

BACKLIGHT

2.6

2.5

BACKLIGHT

0.4

BACKLIGHT

LCDMODULEASSEMBLY

G

HOT CIRCUIT. BE CAREFUL.

HOT

COLD

INVERTER CBA

TO POWER SUPPLY CBA CN602

(SWITCHING)

(SWITCHING) (ISOLATOR)

(FEEDBACK)

(SWITCHING) (SWITCHING)

82.0

81.0

1.1

00

0.4

0

0.21.1 3.3

0

0.3

0

3.40

0

0.2

10.4

6.60.2

0.2

6.6

134.8

(SWITCHING)

(SWITCHING)

5.8

6.381.0

0

6.68.4

0.70

0

0

OVER VOLTAGEPROTECTOR

0.70


0.7


0.7

0

0

0


0

0.7


0.7

0

0

0


0

0.7


0.7

0

0

0


0


TO LCD MODULEASSEMBLY

15.5(DRIVE)

4.0 3.9

3.9

(DRIVE)0

4.0

3.9

0.2

82.5

0

3.40.1

0

0.3(SWITCHING) 4.0

(DRIVE)

3.915.5(DRIVE)

4.0

3.9

0-0.3

4.0

0

(SWITCHING)

3.6

0

0.5(SWITCHING)

(SWITCHING)

(SW+16V)

(SWITCHING)

(SWITCHING)

(SW+16V)

(SWITCHING)

(SWITCHING)

(SWITCHING)

(SWITCHING)

SWITCHINGBACKLIGHT-ON

SWITCHINGBACKLIGHT-ON

1.3 1.6 0 3.73.11.7

0

1.3 3.6

5.1 0

PWM CONTROL

15.75.10.30.2 3.7

0.2

82.5 3.9

UNLESS OTHERWISE SPECIFIED:DIODES ARE 1SS133.

CURRENTCONTROLSWITCH

CURRENTCONTROLSWITCH

15.8 15.715.0

0.1

00.7

0.8

0.10

0.1

00.7

4.81.9

5.13.6

00.2

015.8

003.43.4-6.2000

15.8

15.7

15.0

15.7

0

0.80

0

3.60

3.9

0 0

0 2.5 0

15.8

0

3.43.4

0


15.8

0

0

-6.2

0

0

OPEN OPEN OPENOPEN

OPEN

FL11.11SCINV

Inverter Schematic Diagram


11-8

CL103B1AL+3.3V2GND3KEY-IN1

SW101A SW103A SW104A SW105A SW106A SW107A

0.1C108

4.7KR113

8.2KR114

220R108

2.7KR112

10KR109

18KR115

4.7KR111

OPEND107

4KEY-IN2

10KR152

WIRER151

0.1C151

OPEND151

SW153

2.2KR154

SW151 SW152

2.2KR153

SW154 SW155

OPENR156

OPENR155

SW101B SW104B SW103B SW105B SW107B SW106B

2

1

A B C

FUNCTION CBA

TO IR SENSORCBA CL103C

CH UP VOLDOWN

POWER MENU

UNLESS OTHERWISE SPECIFIED:SWITCHES ARE SKHHLMA0100.

STOP EJECTPLAYCHDOWN

VOLUP OPENOPEN

VOLDOWN

POWER CHDOWN

MENU VOLUP

CH UPOPEN OPEN OPEN OPEN OPEN OPEN

FL11.11SCF

Function Schematic Diagram

11-9

100R128

6KEY-IN15P-ON-H1

220R124

CL101B1GND

L-53HTD105

2 GND

47/16VC113

CL103C1 AL+3.3V

OPENC114

1KR126

2REMOTE

OPENC111

4LED1Vcc

GND

VOUT

2 31

RS102KSM-712TH2E

3.3KR127

3 KEY-IN1

220R123

330PC115

3AL+3.3V

OPENC110

333GT/ED104

4 KEY-IN2

OPENC112

220R125

LTL-307YD106

7KEY-IN28DVD-LED

IR SENSOR CBA

POWER

(REMOTE SENSOR)

A

TO FUNCTIONCBA CL103B

B

TO POWER SUPPLYCBA CN101

2

C

1

STANDBY

DVD

FL11.11SCIR

IR Sensor Schematic Diagram

11-10

1 STV

3 OE1

6 TP

4 CPV5 POL

2 XA0

CN300524 GND

13 LLV3(+)

10 LLV4(-)

15 LLVCLK(-)16 LLVCLK(+)

12 LLV3(-)

19 LLV2(+)

11 LLV4(+)

18 LLV2(-)

23 LLV0(+)

20 LLV1(-)21 LLV1(+)22 LLV0(-)

AA12

AA13AB13

W13Y13

W12Y12

W11Y11

AB14AA14

AA11AB11

AB16AA16AB15AA15

AB17

AB12

W14REFR

17 GND

14 GND

9 LLV5(+)8 LLV5(-)7 GND

1KR3152

P-ON+3.3V

0R3126

0R3128

OPENR3127

OPENR3129

RESET-LCD

OPENR3124OPENR3125

0R3164

0R3170

0R31670R3168

OPENR3116OPENR3117

0R31120R3114

TPPOL

12 RX3(-)

1 GND

20 RX1(-)21 RX1(+)

17 GND

11 NU

3 GND4 GND

15 RXCLK(-)

22 RX0(-)

13 RX3(+)

18 RX2(-)

7 GND

19 RX2(+)

8 NU

24 GND

5 GND

16 RXCLK(+)

9 NU

2 GND

6 GND

10 NU

23 RX0(+)

14 GND

25 GND26 GND27 LCD+12V28 LCD+12V29 LCD+12V

CN300431 LCD+12V30 LCD+12V

Q3001OPEN

1 2 3 4

5678

Q3002OPEN

OPEN

R3161

LCD+12V

OPENC3078

OPENR3007

OPENR3006

OPENC3002

OPEN

R3155

OPENR3113OPENR3115

0R3165W16Y16

0R3166

OPENR3118OPENR31190R3120

OPENR3121

0R3122

OPENR3123

0R3163

OPEN

R3157

OPEN

R3159

OPEN

R3160

OPEN

R3162

OPEN

R3158

CPVOE

STV

0R3169

5.6KR3088

*1IC3005(1/6)R8J04013BG-RJ

AA17

Y15W15

OPENR3002

OPENR3001

RESET-LCD

20DVD-Pb

22DVD-Y

26DVD-AUDIO(R)

13DVD-SCLK

19GND

14GND

27GND

12GND

10GND

23GND

25DVD-AUDIO-MUTE

6DVD-P-ON

16LED-CONT

4P-ON-H3(NU)

11DVD-CS

21GND

2KEY-IN2

9DVD-DISC-IN

5DVD-MAIN-PWR

17GND

3DVD-LED

1GND

18DVD-Pr

24DVD-AUDIO(L)

DVD-SPDIF 28

8DVD-SDATA7DVD-REMOTE

CN3003GND 29

15DVD-DISC-OUT

33PC3269

33PC3267

33PC3294

100PC3272

OPENC3296

OPENC3266

680R3473

33PC3268

680R341933P

C3295

100PC3273

100R3417

100R3471

100PC3270

1000PR3418

100R3420

1000PR3474

100PC3271

100R3472

100R3425

100R3426

100R3427

100PC3274

100R3428

100PC3275

100R3429

100PC3277

100R3430

100PC3278100P

C3279

100R3432

100PC3280

100R3433

1000PC3281

DVD-AUDIO-MUTE

DVD-AUDIO(L)DVD-SPDIF

DVD-AUDIO(R)

KEY-IN2

DVD-P-ONDVD-SDATA

LED-CONT

DVD-DISC-IN

DVD-Pr

DVD-CS

DVD-Pb

DVD-REMOTE

DVD-DISC-OUT

DVD-SCLK

DVD-Y

DVD-MAIN-PWRDVD-LED

100PC3276

DIGITAL SIGNAL PROCESS/MAIN MICRO CONTROLLER


LVDSTX

TO DIGITAL MAIN 2IC3005(2/6)

CONTINUEDIGITAL 5

CONTINUEDIGITAL 5

DIGITAL MAIN CBA UNIT

CONTINUEDIGITAL 4


DC

2

4

B

1

E FA

3

CONTINUEDIGITAL 2


CONTINUEDIGITAL 3

CONTINUEDIGITAL 4

CONTINUEDIGITAL 2

FL11.11SCD1

Digital Main 1 Schematic Diagram

The order of pins shown in this diagram is different from that of actual IC3005. IC3005 is divided into six and shown as IC3005 (1/6) ~ IC3005 (6/6) in this Digital Main Schematic Diagram Section.

1 NOTE:

11-11

GND7

COM-VIDEO-Y-IN15

GND1

GND9S-VIDEO-Y-IN8

SPDIF2

RESET23

AUDIO-MUTE20

CN3006KEY-IN129

GND25

S-VIDEO-C-IN6

COM-VIDEO-Pr-IN19

GND16COM-VIDEO-Pb-IN17

VIDEO-IN4

33PC3107

33PC3104

33PC3103

33PC3093

33PC3095

33PC3098

1000PC3092

1000PC3074

100R3404

100PC3111

A8B7

A12

D8

C14

B12A11

D9

C11C8

0.1C32010.1C3202

0.1C3203

0.1C3200

0.01C3197

0.1C31990.1C3198

OPENC3196

OPENC3194OPENC3195

DIF-OUT228

DIF-OUT126

IF-AGC24

AUDIO(R)11INPUT012

SCL22SDA21

AUDIO(L)13

33PC3100

SDASCL

AUDIO-MUTE

F2

J1IF-AGC

22R3188

Y18HDMA-SCLW19HDMI-SDA

SPDIF

GND3

S-VIDEO-SW5

1000PC3105

100R3175

INPUT110

33PC3102

22R3187

100R3171AUDIO(R)

100R3154AUDIO(L)

GND14

GND18

100R3144100R3142100R3138

100R3134

GND27

KEY-IN1

AB22S-VIDEO-SW

K1INPUT0L4INPUT1

0R3179

100PC3099

OPENC3084

P-ON+5V

100PC3101

100PC3112

0R3181

OPENR3180

Q3010OPEN

OPENR3184

OPENR3185

LIGHT-SENSRESET

OPENR3356 D3049

OPEN

OPENR3364

OPENR3284

1

2

3

4

5

14

13

12

11

15

6

7

8

9

10

JK3001(OPEN)D-SUB CONNECTOR

D3055OPEN

D3053OPEN

OPENR3377

OPENR3285

OPENR3286

OPENR3376D3040

OPEND3027OPEN

1

2

3

4 5

6

7

8

IC3012(OPEN)

A0

A1

A2

GND SDA

SCL

WP

VCCOPENC3211

OPENR3310

OPENR3326

OPENR3333

D3041OPEN

Q3012OPEN

Q3011OPEN

4.7KR3193

4.7KR3192

OPENR3321

OPENR3334

D3054OPEN

1

2

3 4

VCC

GND

5

IC3013(OPEN)

1

2

3 4

VCC

GND

5

IC3014(OPEN)

OPENC3214

AL+3.3V-2

B15VSINB14HSIN

OPENR3296

OPENR3295

OPENR3339

OPENR3347 D3045

OPEN

OPENR3358 D3050

OPEN

OPENR3343

M19DVD-DISC-OUT

B10NU0.1C3210

A6NU0.1C3209

A9NU0.1C3208

B11NU0.1C3207

B13NU0.1C3206

A14NU0.1C3205

A13NU0.1C3204

B9NUE3NUC9NUB6NU

OPEN

C325

6

OPEN

C325

7OP

ENC3

258

OPEN

C325

9

OPEN

C325

5OP

ENC3

254

0R34000R3399

0R3398

0R3401

0R3403

0R3402

OPENR3183

OPENR3186

D3056OPEN

RESET-LCD

F1

IC3005(2/6)R8J04013BG-RJ

*1

C7NUA10NU

OPENR3298

OPENR3297N21DVD-DISC-IN

OPENR3467OPENR3466

10PC3225

10PC3226

0R3338

0R3337

L30220.27uH

0R3345

0R3344

33PC3235

L3024OPEN

L3023OPEN

0R3353

0R3354

OPENC3243

OPENR3369

0R3361

0R3360

OPENC3242

OPENR3368

2.2KR3202

0.1C3178

2.2KR3194

0.33C3177

22R3218

HDMI-SDAHDMI-SCL

33PC3089

A1 NU0.1C3219

10C3220

E2 NU0.1C3221

E1 NU0.1C3222

1000PC3086

33PC3087

10KR3190

10KR3189

100R3156

100R3172

P-ON+3.3V

WP

OPENR3416

22R3228

22R3229

OPENC3293

OPENC3292

OPENC3291

A15NUC12DVD-YA7DVD-PbB8DVD-Pr

0.1C3285

0.01C32900.1C3284

0.1C3286

0R34580R34590R3460

OPEN

C328

7

OPEN

C328

9OP

ENC3

288

OPEN

R347

6OP

ENR3

477

OPEN

R347

8

W18DVD-REMOTER3437 10K

Q30332SC4081UBTLQ

10KR3436

R3435 100

DVD-Y

DVD-PrDVD-DISC-OUT

DVD-Pb

DVD-REMOTEDVD-DISC-IN

22R3219

4

JI

3

2

L

1

G H K




CONTINUEDIGITAL 4

CONTINUEDIGITAL 3

SW

A/DCONVERTER

DEMODULATOR/MPEGDECODER

DIGITALSIGNALPROCESS



CONTINUEDIGITAL 3


(MEMORY)

(BUFFER GATE)

(BUFFER GATE)

CONTINUEDIGITAL 1

CONTINUEDIGITAL 6

CONTINUEDIGITAL 5

CONTINUEDIGITAL 1

(BEFFER)

(BUFFER)

(BUFFER)

FL11.11SCD2



1 NOTE:

11-12

L3ACLK

1 2 3 4 5 6 7

910

8

1112131516 14GND VCC NUNU

ENHANCEDMULTI-LEVELDELTA-SIGMAMODULATOR

ZERO DETECT

4X/8XOVERSAMPLINGDIGITAL FILTER/FUNCTIONCONTROLLER

LPFLPF DAC

DAC

AUDIOSERIAL PORT

SYSTEMCLOCKMANAGER

SERIALCONTROL PORT

IC3010PCM1782DBQR

L1BCLK

M2

22R3196

22R3198

22R3195

22R3197

G1G2

0.1C3215G3NU

10C3216

C410C3217

AUDIO(L)

B510C3218

AUDIO(R)

C3NUC1C2NUB2NU

AA10SRXD0Y10SCLK0

AB10STXD0

SPDIF

AUDIO(L)-OUT

OPENR3174

OPENR3173

AUDIO(R)-OUT

10C3108

0.1C3110

10C3109

L3013BLM21PG221SN1D

P-ON+5V

AMP(L)-OUTAMP(R)-OUT

0R3176

0R3177

L2SPDIF

18KR333518KR3336

OPENR3331

OPENR3327

22R320022R3201

22R3199

100R3209

GND


1 2 3 4

5678

82PC3237

3.9KR3355

68KR3350

4.7KR3342

4.7KR3332

82PC3232

82PC3229

4.7KR3325

10C3224

OPENC32450R3362

OPENR3320

12KR3393

12KR3394

10C3249

220PC3248

0.1C3250C3251

100/16V

L3038BLM21PG221SN1D

3.9KR3352

68KR3351

82PC3241

82PC3230

4.7KR3330

4.7KR3341

10C3223

4.7KR3322

82PC3227

0R3359

OPENC3244

OPENR3311

B1NU

A2B4NU

A5NUA4NUA3NU

B3NU

K20P-ON-H2

J21LED-R

VCOM-PWM

P-ON-H2

AB21VCOM-PWM

K21REMOTE

REMOTE

LED-R

MADIN0

G21KEY-IN1H19MADIN0

KEY-IN1LIGHT-SENS

G20KEY-IN2H21PROTECT1

PROTECT1

G22PROTECT2

PROTECT2

H22PROTECT3

PROTECT3

H20DTV-ON-H2

DTV-ON-H2

M3DVD-AUDIO-MUTE100R3208

M21DTV-ON-H1100R3210

DTV-ON-H1

J19HDMI-HPD122R3211

HDMI-HPD1

22R3212J20HDMI-HPD0

HDMI-HPD0

22R3213

K22HDMI-CEC

HDMI-CEC

P18NU22R3214

J22HDMI-HPD2

HDMI-HPD2

100R3205

OPENR3313

22R3318

22R3312

22R3316

22R3314

22R3317

22R3315

M1

*1IC3005(3/6)R8J04013BG-RJ

LRCLK

10KR3178 100

R3191

RESET

0.1C3106

0.1C3252

4.7KR3182

32

1 4

IC3009PST8420UR

CDVDD

GND OUT

T20RESET-N

0.033C3113

OPENC3116

0.01C3120

AL+3.3V

CPU-RESET-N

10C3282 22R3444

10KR3446

10C3283

10KR3447

1KR3445

100KR3475

22R3465

1

2

3 4

VCC

GND

5

IC3017SN74LVC1G126DCKR

1

2

3 4

VCC

GND

5


100R3439

100R3440

OPENR3438

P-ON+3.3V

L3040BLM21PG221SN1D

C7-SPD-ENDVD-SPD-EN

DVD-AUDIO(L)DVD-SPDIFDVD-AUDIO-MUTEDVD-AUDIO(R)

KEY-IN2

4

PO

3

2

R

1

M N Q


AUDIOI/F

CONTINUEDIGITAL 2

DIGITAL MAIN CBA UNIT CONTINUEDIGITAL 5



AUDIO D/ACONVERTER

(OP AMP)

CONTINUEDIGITAL 4

CONTINUEDIGITAL 2

CONTINUEDIGITAL 5

CONTINUEDIGITAL 6

(RESET)

(BUFFER GATE)

(BUFFER GATE)CONTINUEDIGITAL 4

CONTINUEDIGITAL 1


FL11.11SCD3


1 NOTE:

11-13

IC3002K4T51163QG-HCF7

*A VDD J2VREF

E2 NUK2CKEJ8CKK8CKL8CSK7RASL7CASK3WEL1BA2/NUL3BA1L2BA0R2A12P7A11M2A10/APP3A9P8A8P2A7N7A6N3A5N8A4N2A3M7A2M3A1M8A0K9ODT

*BVSS

A2 NUR8 NUR7 NUR3 NU

B7 UDQSA8 UDQS/NUB3 UDMB9 DQ15B1 DQ14D9 DQ13D1 DQ12D3 DQ11D7 DQ10C2 DQ9C8 DQ8F7 LDQSE8 LDQS/NUF3 LDMF9 DQ7F1 DQ6H9 DQ5H1 DQ4H3 DQ3H7 DQ2G2 DQ1G8 DQ0

N4 SD-DQ14T2 SD-DQ13R4 SD-DQ12P4 SD-DQ11R2 SD-DQ10R3 SD-DQ9R1 SD-DQ8V1 SD-DQ7T4 SD-DQ6W2 SD-DQ5V4 SD-DQ4W3 SD-DQ3W1 SD-DQ2U4 SD-DQ1V2 SD-DQ0N3 SD-UDMU3 SD-LDMP1 SD-UDQSNN2 SD-UDQSU1 SD-LDQSNU2 SD-LDQS

AB2 SD-RASAA3 SD-CASW6 SD-WE

AA1 SD-CLKNY2 SD-CLKW8 SD-CKEAA2 SD-ODTAB8 SD-A12

Y8 SD-BA2

W7 SD-A1

AA4 SD-A4

W5 SD-A2

AA5 SD-A8AA7 SD-A9

AA8 SD-A7

Y6 SD-BA1

AB5 SD-A11

AB4 SD-A6

AB3 SD-A0

AB7 SD-A3

AB6 SD-A10

W9 SD-BA0

AA6 SD-A5

100R3026

0.1C3009

0.1C3010

100R3027

H2USB(+)H1USB(-)

P-ON+5V

1

2

3

4 5

6

7

8

IC3006W25X32VSSIGE

CS

SO

WP

GND SI

SCK

NU

VCC

K2SDAK3SCL

SCLSDA

4.7KR3204

4.7KR3203

3USB(+)4GND

2USB(-)

CN30091USB+5V

1C3246 Q3009

2SB1732TL

330R3151

330R3153

10KR3150 1

C30961KR3146

10KR3147

15KR3148

MADIN0

D3002AS431AKTR-E1 33K

R3140

33KR3139

180R3141

2.4R3135

1.6R3136

Q30082SC4081UBTLQ

10KR3108

Y20 CS

0.1C30290.1C30300.1C30310.1C30320.1C30330.1C30340.1C30350.1C30360.1C30370.1C30380.1C30390.1C30400.1C30410.1C3042

OPENC3091

10KR3104

P-ON+3.3VAL+3.3V

P-ON+1.8V

AA9 NU

4.7R30244.7R3015

22R3048

22R3038

22R3031

22R303522R303622R3037

22R3016

22R302922R3030

22R304022R3039

22R304122R304222R3043

22R3047

22R304522R3046

22R3044

22R3032

22R303422R3033

Y4 SD-CS22R3028

120R3049

2 UART0-TXR20RXD0

OPENC3253

3 UART0-RX

4.7KR3395

4 GND4.7KR3396

R19TXD0

CN30101 P-ON+5V

L3004BLM21PG221SN1D

10KR3107

10KR3102

L3025 EXC24CG900U D3052OPEN

47R308947R3092

47R3093 22R320622R3207

AB18OE222R3090

OE2

47R3091

W20BACKLIGHT-SW22R3095

Y22P-ON-H122R3096

4.7KR3098

BACKLIGHT-SW

P-ON-H1

U19DVD-MAIN-PWRV20DVD-P-ON

W21USB-EN

W22DVD-SPD-ENV21GPIO6

J3NU6.04KR3099

F22NU10C30760.1C3075

J4NU10C30720.1C3071

H3NU

GPIO6

22R3131

IC3005(4/6)R8J04013BG-RJ

*1

R5 SD-VREF0

P2 SD-DQ15

V7 SD-VREF1

0.1C3051

100R3065

0.1C3050

100R3064

POLAB20OE

K19LED1

CPV

AB19TP

LED1

AA19STV

Y19POL

OE

AA18CPVSTV

TP

0.1C3073 130R3070

130R3071

100R3421

100R3422

CN3007P-ON+5V1

2 UART0-TX3 NU4 NU5 UART0-RX6 M32TDI

9 M32TRST-N10 RESET-LCD11 GND

8 M32TDO7 AL+3.3V

14 ASEMD015 TRST-N16 TCK

13 ASEBRKAK-N12 M32TMS

19 TMS20 CPU-RESET-N

18 TDO17 TDI

U21DVD-CS

T19DVD-SDATAU22M32TRST-N

10KR3224

V22RESET-LCD

U20DVD-SCLKP22ASEBRKAK-NR21ASEMD0P19TRST-NP20TCKP21TDIM22TDON22TMS

CPU-RESET-N

L22GPY10

GPY10

L19AUDIO-MUTE

10KR3234

22R3233

AUDIO-MUTE

22R323222R3231

AA20NU10KR323022R321722R321622R3215

RESET-LCD

W17BACKLIGHT-ADJ100R3227

BACKLIGHT-ADJ

Y17C7-SPD-EN22R3225

L20DVD-LED

CPU-RESET-N

OPENR3441

L3041BLM21PG221SN1D

OPENR3450

100R3470

22R3442

100R3469

100R3468

22R3448

22R3449

L21LED-CONT22R322622R3451

OPENR3453

C7-SPD-ENDVD-SPD-EN

OPENR3452

22R3443 100R3463

100R3461100R3462

DVD-SCLK

DVD-SDATA

DVD-MAIN-PWR

DVD-CS

DVD-LED

DVD-P-ON

LED-CONT

1MR3235

T22XIN25

15PC3183

X300125MHzT21XOUT25

510R3223

15PC3184

AA21 WPAA22 SOUT

Y21 SIN

47R3094V19 SCK

22R3454

L3043BLM21PG221SN1D



(DDR2 SDRAM)

*B:A3,A7,B2,B8,D2,D8,E3,E7, F2,F8,H2,H8,J3,J7,N1,P9

*A:A1,A9,C1,C3,C7,C9,E1,E9, G1,G3,G7,G9,J1,J9,M9,R1

1-V32-V33-V3

4-V35-V36-V3

SD-DQ8SD-DQ14SD-DQ15SD-DQ12SD-DQ11SD-DQ10SD-DQ9SD-DQ13

SD-DQ7SD-DQ6SD-DQ5SD-DQ3SD-DQ4SD-DQ2SD-DQ1SD-DQ0

SD-DQ2

SD-DQ5

SD-DQ1

SD-DQ4

SD-DQ0

SD-DQ7

SD-DQ3

SD-DQ6

SD-DQ13

SD-DQ9

SD-DQ12

SD-DQ8

SD-DQ15

SD-DQ11

SD-DQ14

SD-DQ10

1-S32-S3

3-S3

4-S35-S3

6-S3

(MEMORY)

(USB JACK)

(SW+5V)

(SWITCHING)

CONTINUEDIGITAL 5

2

S V

1

T U

3

4

W X

(NO CONNECTION)

CONTINUEDIGITAL 1

CONTINUEDIGITAL 5

(NO CONNECTION)

CONTINUEDIGITAL 2

CONTINUEDIGITAL 3

CONTINUEDIGITAL 6

CONTINUEDIGITAL 3

CONTINUEDIGITAL 1


FL11.11SCD4


1 NOTE:

11-14

P-ON+3.3V19

21 AL+3.3V

P-ON-H21

GND23OE224

P-ON+3.3V20

P-ON-H19

REMOTE25

GND3

P-ON+5V13

BACKLIGHT-ADJ28

BACKLIGHT-SW26

CN3002VCOM-PWM29

BACKLIGHT-SW

0.1C3016

0.1C3022

P-ON-H1

1000PC3055

1000PC3067

0.1C3047

*AVDD12

AL+3.3V

P-ON+5V14

10C3045

AUDIO(L)-OUT2

100R3087

AUDIO(R)-OUT4

100R3085

PROTECT35AMP(L)-OUT6

100R3078

GND7

100R3074

AMP(R)-OUT8

P-ON+3V10PROTECT111

1000PC3048

100R3101

100R3072

GND12

PROTECT215

1000PC3044

P-ON+7V160.1C3043

10C3028

1

2

3

4 5

6

7

8

IC3008BD9321EFJ-E2

BST

VIN

SW

GND FB

COMP

EN

SS

0.015C30886.8KR3137

15KR3143

6.04KR3145

0R3149

L300910uH

D3001SK22A

0.1C3085

0.1C3082

10C3081

10C3080

0.1C3083

1C3090

1 2 3 4 5

IC3007BD7820FP-E2

CTL

VCC

GND

OUT

C

1KR31111K

R3110

390R3109

GND17GND1810

C3019

22 AL+3.3V

10C3015

1 2 3 4 5

IC3004BD7820FP-E2

CTL

VCC

GND

OUT

C

1KR3060

390R3059

1KR3061

100R3017OE2

100PC3008

100R3014

LED127

100R3008

100R3009

100R3010

1000PC3005

LED1

100R3011

1000PC3006

AUDIO(L)-OUTAUDIO(R)-OUTAMP(L)-OUTAMP(R)-OUT

P-ON+5V

AL+3.3V-2

P-ON+5V

P-ON+3.3V

100PC3003

1000PC3061

1000PC3057

1000PC3062

OPENR3063

OPENR3062

10C3097

10KR3079

*B VSS

0.1C3179

0.1C3180

IC3005(5/6)*1

R8J04013BG-RJ

K5VDDA33RU

Q30042SC4081UB-TLQ

AL+3.3V-2

LCD+12V

OPENR3005

OPENR3004

OPENR3003

BACKLIGHT-ADJ

0R3050

0R3054

Q30032SC4081UB-TLQ

2.2KR3086

2.2KR308410K

R3077

C309447/4V

0.1C3122

0.1C3123

0.1C3124

0.1C3129

0.1C3121

0.1C3128

J2VDDA33USBK4VDDA33USBR22VCC33STBL18VCC33STB

0R3220

0.1C3182

M14VDDSTB

0.1C3181

GDS

Q3013SSM3K309T

100R3221

10KR3222

GPY10

0.1C3125

0.1C3130

V10PLLDVDDN11PLLDVDDV11PLLDVDDN13PLLDVDDN14PLLDVDD

0.1C3136

0.1C3138

0.1C3137

L3015BLM21PG221SN1D

M4VCCQ33V13VCCQ33V15VCCQ33V18VCCQ33W10VCCQ33P10PLLAVCCN10PLLAVCCP11PLLAVCC

0.1C3127

0.1C3126

0.1C3131

10C3133

OPENC3134

0.1C3132

0.1C3142

0.1C3140

0.1C3145

0.1C3144

0.1C3143

10C3139

L3016BLM21PG221SN1D

0.1C3141

P13PLLAVCCT18PLLAVCC

N1VCCQ18N5VCCQ18T1VCCQ18T5VCCQ18V3VCCQ18Y1VCCQ18Y5VCCQ18Y9VCCQ18J9VDD18J10VDD18J11VDD18J12VDD18E10AVDD18E12AVDD18D13VDD18HDMIJ13VDD18HDMIE15VPPOTP

L3014BLM21PG221SN1D

100C3115

0.1C3118

10C3114

0.1C3117

0.1C3119

0.1C3146

0.1C3152

0.1C3151

0.1C3147

0.1C3150

0.1C3149

0.1C3148

OPENC3153

L3017BLM21PG221SN1D

0.1C3157

10C3155

10C3154

0.1C3156

0.1C3160

0.1C3159

0.1C3162

0.1C3161

0.01C3264

P-ON+1.8V

C3049100/4V

10C3024

10C3023C3018

100/16V

L30012uH

0.1C3027

1C3263

0.1C3070

10C3069

10C3068C3066

220/16V

BC30012.2uH

10C3052

0.1C3053

C6AVDD33C13AVDD33D2AVDD33D10AVDD33E8AVDD33E18VDD33HDMIG18VDD33HDMIE17VDD33HDMIJ18VDD33HDMID14VDD33IOH5AVDD33PLLF5AVDD33AUDD1MIXVDD33D5MIXVDD33E4MIXVDD33E5MIXVDD33F4MIXVDD33

L3019BLM21PG221SN1D

0.1C3166

0.1C3165

0.1C3170

0.1C3169

0.1C3168

10C3163

0.1C3171

10C3167

0.1C3164

0.1C3172

0.1C3175

0.1C3173

10C3176

0.1C3174

L3020BLM21PG221SN1D

D11REXTH4LPF

6.8KR3340

0.1C3228

1KR3319 0.1C3231

C3077100/16V

L3003BLM21PG221SN1D

10KR3133

PROTECT1

P-ON-H2

PROTECT2

VCOM-PWM

PROTECT3

LED-R

DTV-ON-H2

REMOTE

DTV-ON-H1

100R3068100R3058

0R3066

1000PC3046

1000PC3004

P-ON+3.3V

P-ON+3.3V

22KR3106

1KR3105

Q30052SC4081UB-TLQ

D31011SS400D31021SS400

22KR3100

2.2KR3097

C3079100/4V

Q31012SC4081UB-TLQ

47KR3423

CPU-RESET-N

100R3424 D3103

1SS400

D3104 1SS400

D31051SS400

1C3054

D31061SS400

C5 NUD4 NUE9 AVSS18E11 AVSS18C10 AVSSD3 AVSSD7 AVSSD12 AVSSE7 AVSSE13 VSSHDMIE16 VSSHDMIF18 VSSHDMIG19 VSSHDMIH18 VSSHDMIJ14 VSSHDMIE14 VSSIOJ5 AVSS33PLLG4 AVSS33AUDG5 AVSS33AUDD6 MIXVSS33E6 MIXVSS33F3 MIXVSS33L5 VSSAUSB

HDMI-VDD33

100R3083

P-ON+3.3V

AL+3.3V

0R3073

Q30062SA1774

C326510

OPENR3464

L3044BLM21PG221SN1D

P-ON+3.3V

P-ON+5V

100PC3011

1000PC3063

1000PC3065

DDAA

4

1

3

2

CCY BBZ




*A:L9~L14,M13,M20, N18~N20,P9,V6, V8,V16

(DC-DC CONVERTER)

(+1.8V REG.)

(+1.8V REG.)

CONTINUEDIGITAL 3

CONTINUEDIGITAL 2

CONTINUEDIGITAL 1

CONTINUEDIGITAL 3

CONTINUEDIGITAL 4

CONTINUEDIGITAL 6

(SWITCHING)

CONTINUEDIGITAL 4

*B:K9~K14,K18,M5, M9~M12,M18,N9, N12,P3,P5,P12, P14,R18,T3,U5, U18,V5,V9,V12, V14,V17,W4,Y3, Y7,Y14,AB1,AB9

(SW+3.3V)

(SWITCHING)

(SWITCHING)

(SWITCHING)

(SWITCHING)

CONTINUEDIGITAL 6

CONTINUEDIGITAL 1


FL11.11SCD5


1 NOTE:

11-15

HDMI-SCL

16 HDMI-DATA

12 CLOCK(-)

JK30021 DATA2(+)

6 DATA1(-)

3 DATA2(-)

14 NU

9 DATA0(-)10 CLOCK(+)

7 DATA0(+)

5 TMDS DATA1 SHIELD

17 GND18 +5V

13 HDMI-CEC

15 HDMI-CLOCK

19 HOT PLUG DETECT

2 TMDS DATA2 SHIELD

4 DATA1(+)

11 TMDS CLOCK SHIELD

8 TMDS DATA0 SHIELD

P-ON+3.3VAL+3.3V-2

Q30142SK3018

27KR3237

D19C20

B21

D20

A22A21

D3057RB751S-40TE61

82KR3415

C18PWR2

13

1

15

14

16

3

6

5

11

4

7

12

10

8 9

2

IC3011BU9883FV-WE2

VCC1

SDA1

WPB

VCC-OUT

SDA0

SCL0

VCC0 VCC3

SCL3

SDA3

GND

NU

SDA2

SCL2

VCC2

SCL1

B16PWR1C15PWR0

D18EXT-RES

F21PLL-XFC-A

0.1C3192HDMI-SDA

4.7KR3455

GPI06

OPENR3261OPENR3238OPENR3239OPENR3240OPENR3241OPENR3242OPENR3243OPENR3244

OPENR3390

OPENR3381OPENR3365

OPENR3387

Q3030OPENOPEN

R3386

OPENR3408 OPEN

R3412

OPENR3370

OPENR3371

OPENR3411

OPENC3262Q3022

OPEN

OPENR3300

OPENR3292

HDMI-HPD0

15 HDMI-CLOCK

19 HOT PLUG DETECT

Q30242SK3018

1KR3372

10KR3301

Q30312SC4081UBTLQ

2 TMDS DATA2 SHIELD

6 DATA1(-)

0R3391

4 DATA1(+)

10KR3383

3 DATA2(-)

11 TMDS CLOCK SHIELD

10KR3293

HDMI-HPD1

14 NU

0R3388

0R3382

8 TMDS DATA0 SHIELD

OPENR3373

9 DATA0(-)10 CLOCK(+)

7 DATA0(+)

5 TMDS DATA1 SHIELD

17 GND

0R336616 HDMI-DATA

18 +5V

12 CLOCK(-)

1KR3407

13 HDMI-CEC

OPENR3413

JK30031 DATA2(+)

0R3392

8 TMDS DATA0 SHIELD

11 TMDS CLOCK SHIELD12 CLOCK(-)

2 TMDS DATA2 SHIELD

JK30041 DATA2(+)

OPENR3375

18 +5V

Q30322SC4081UBTLQ

10 CLOCK(+)9 DATA0(-)

10KR3302

10KR3385

19 HOT PLUG DETECT10KR3294

0R3367

13 HDMI-CEC

7 DATA0(+)

1KR3406

14 NU

16 HDMI-DATA

0R3389

4 DATA1(+)

15 HDMI-CLOCK

Q30232SK3018

6 DATA1(-)

0R3384

1C3260

HDMI-HPD2

5 TMDS DATA1 SHIELD

1KR3374

3 DATA2(-)

17 GND

OPENR3414

0.1C3212

Q30202SK3018

47KR3276

47KR3273

Q30152SK3018

4.7KR3266

4.7KR3263

C19

*1IC3005(6/6)R8J04013BG-RJ

B22

100R3405

HDMI-CEC

A16DDC0-SCLC16DDC0-SDA

D16DDC1-SDA

0R32470R32480R32490R32500R32510R3252

F19

E19

D21

C21

E20

0R3245

D22

C22

F20D15DDC1-SCL

0R3246

0R3254

D17DDC2-SCLB20

B17

B18

0R3253

B19

A17

A18

C17DDC2-SDA

0R32550R32560R32570R32580R32590R3260

A20

A19

100R3282

100R3281

0.1C3213

E22PLL-XFC-P

E21PLL-XFC-X

0.01C3185560R3236

HDMI-VDD33

7.5KR3270 4.7

C3187

0.1C3186

3KR3271 2200P

C3188

6.8KR3272 0.022

C3189

4.7KR3264

4.7KR3267

Q30162SK3018

Q30182SK3018

47KR3274

47KR3277

OPENC3190

OPENR3268

Q3019OPEN

OPENR3262

Q3017OPEN

0.1C3191

OPENR3275

OPENR3278

L3039BLM21PG221SN1D

1C3261

Q3034OPEN 4.7K

R3456WP

D3060OPEN

2.7KR3410

D30581SS400

D30591SS400

2.7KR3409

L3026OPEN

L3028OPEN

L3030EXC28CG900U

L3032EXC28CG900U

L3034EXC28CG900U

L3036EXC28CG900U


(BUFFER)

HDMII/F

VIDEODECODER



AUDIODECODER

DIGITAL MAIN CBA UNITHDMI-CONNECTOR-3

(HDMI SERIAL EEPROM)CONTINUEDIGITAL 4

3

4

2

1

EE HHFF GG II JJ

(BUFFER)

HDMI-CONNECTOR-1

(BUFFER)

HDMI-CONNECTOR-2

(BUFFER)

(BUFFER)

(BUFFER)

(BUFFER)

(BUFFER)

(BUFFER)

(BUFFER)CONTINUEDIGITAL 5

CONTINUEDIGITAL 5

CONTINUEDIGITAL 2

CONTINUEDIGITAL 3

(SWITCHING)

(SWITCHING)

(SWITCHING)

(SWITCHING)


FL11.11SCD6


1 NOTE:

11-16

Q254KTA1504S-Y-RTK/P

Q253KTC3875S-GR-RTK/P


Q251KTC3875S-GR-RTK/P

L20147uH

FSTS

C3110.1

C3180.1

C4030.1

C3100.1

C4020.1

C3010.1

C2100.1

C3143300P

C313220P

C2030.1

C219

1

C2010.1

C3150.1

C2810.1

C218

1

C3056800P

C4050.1

C217

1

C30368P

C220

1

C3170.1

C2150.1

C202180P

C3080.039

R3051K

R3201.5

R2615.6

R2622.2

R3191.5

R30868K

R268180

R255560

R31591K

R265470

R228

2.2K

R30322K

R227

2.2K

R258180

R31310K

R232 1KR233 1K

R3011.5K

R231 1K

R234 1K

R225

2.2K

R226

2.2K

R2513.3

R2522.2

R3181.5

R3171.5

8 EV+3.3V

4TS(-)13 GND

7PD-MONI

14NU

9GND(LD)

4 EV+1.2V

23 DVD-DISC-IN

16C

4SL(-)

20 PWRCON(NU)11GND

19 GND

8DVD-LD

3GND

21 DVD-SCLK22 DVD-CS

15 GND

10CD-LD

10 DVD-ON+5V

12NU

CN2011TS(+)

6GND(DVD-PD)

3FS(-)

18D

17 GND

2FS(+)

24 DVD-SDATA

6 EV+3.3V

5SL(+)

13VREF

7 EV+3.3V

20DVD-ON+5V

12 EV+9V

9 DVD-ON+3.3V

19CD/DVD

16 GND

5GND(CD-PD)

11 EV+9V

25 DVD-REMOTE

18 GND

15B

6LOAD-DISC

5 EV+1.2V

CN3011SP(+)

14 GND

2SP(-)

EV+3.3V(D)

LPCEV+3.3V(A)

VREF165

VIN5

EV+1.2VLPCO1

CD/DVD

LPCO2

VREFH

SPDL

LOAD-DISC

VIN1RF

VIN6

VIN8

VIN2RF

VIN4RF

VIN7

VIN3RF

SLDSTBY

1

2

3 4

VCCGND 5

6


TRACKING DRIVEFOCUS DRIVE

C2571

M

M

C2591

1

2

3

4

5

6

7

9

10

8

11

12

13

15

16

14

17

18

19

20

21

28

27

26

25

24

23

22

GND

SPINDLEMOTORDRIVE

TRACKINGACTUATORDRIVE

VCC

VCC

DET.AMP

SLEDMOTORDRIVE

FOCUSACTUATORDRIVE

STBY

DET.AMP

GND

VCC

GND

IC301SA5624G

17A

C26347/6.3V

C253100/6.3V

C2500.1

SP-ROT

R302220

TD-OFSTFD-OFST

6

13

71

14 8

2

9

3

10

4

11

5

12

VCC

GNDIC202LM324PWR

R28410K R285

22KR28210K

R27747K

R28310K C288

3300PR27847K

R2862.2K

C2846800P

R27947K

C2893300P

R27647K

R2801K

C2800.1

R28110K

R325 1K

C302820P

C3160.1

R406 1KR404 1K

PWRCON

R407 1KR402 1K

DVD-REMOTE

DVD-SDATA

C421 47P

C425 47P

C422 47P

C426 47P

DVD-SCLK

C423 47P

DVD-CS

R403 1K

IC461PST3229NR

2

4 5

3 1

IC462BMR-110529

2

1 3

R471100K

RESETC4730.1

RESET

L4030

L4010

SL-ADS

R2692K

R2641K

L4020

C4110

C4100

EV+3.3V(D)

C4710.1

C4180.1

C4160.1

C417150P

R32210K

DVD-DISC-OUT

3DVD-DISC-IN4GND

CN50011234

CN8011LED-POWER

DVD-DISC-IN

2DVD-DISC-OUT


R81110K

R816 15KR812 15K

C8040.1

R8050

R8060

R8014.7K

C8020.01

C8010.01

R8034.7K

C2320.01

C2330.01

C4120

CN4011 AV+3.3V

3 DVD-DISC-OUT2 LED-CONT

26 DVD-P-ONC427 47P

DVD-P-ONR411 1K

R8181K

R815 4.7K

R8130

330/6.3VC408

R8171K

(SERVO DRIVE)

C D E FA B

1

2

3

4 (OP AMP)

0.1

0

0 3.3

(SW)

0

(AMP)

(AMP)

CONTINUEDVD MAIN 2

CONTINUEDVD MAIN 2

CONTINUEDVD MAIN 2

PICK UP UNIT

DETECTOR

CONTINUEDVD MAIN 3


79112365

DVD MAIN CBA UNIT

(AMP)

(AMP)

SPINDLEMOTOR

SLEDMOTOR

LOAD-DISC

DRIVECBA

4

CONTINUEDVD MAIN 2

VOUTVCCGND

(RESET)

VOUTNU

GND VCCNU

(RESET)

CONTINUEDVD MAIN 3

(0)0.3

*2

DISC-IN DISC-OUT

CONTINUEDVD MAIN 2SENSOR CBA

(LED DRIVE)

FL11.11SCDV1

DVD Main 1 Schematic Diagram 2 NOTE: Either IC461 or IC462 is used for DVD MAIN CBA UNIT.

11-17

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216

RF SIGNALPROCESSCIRCUIT

DAC

DAC

DAC

DAC

DAC

SDRAM DATA(0-15)

EXTERNALMEMORY INTERFACE

SDRAM ADDRESS(0-10)

EXT MEMORY DATA(0-15)

DATARAM

READMEMORY

STREAMINTERFACE

CPUINTERFACE

I/OPROCESSOR

CPUINTERFACE

INST.ROM

INST.ROM

INST.ROM

32BITCPU

BCU

DSPDECODER

DATARAM

TIMER

DMA

DECODERINTERFACE

INTERRUPTCONTROLLER

DATARAMUMAC

ECC

WATCH DOGTIMER

DVD/CDFORMATTER

GENERALI/O

BCUDEBUG

SERIAL WATCH DOGTIMER

INST.CACHE

TIMER

32BITCPU

REMOTECONTROL

INTERRUPTCONTROLLER

DATACACHE

VIDEOINTERFACE

NTSC/PALENCODER

AUDIOINTERFACE

AUDIO D/ACONVERTER

IC101MN2DS0018VP

EV+1.2VEV+3.3V(D)

C1280.1

EV+3.3V(A)

L1082.2uH

C136330/6.3V

C1071000P

C103820P

C1090.1

C108100P

C1041000P

C1050.1

C1021000P

C101100P

C106120P

C1120.1

C115180P

C1191000P

C1131000P

C11447P

C1100.01

C111150P

C117820P

R131 10K

EXT-WEMCK

EXT-OE

BA0

EXT-CE

R10156

FDQ(0~15)

FD-OFSTTD-OFST

LOAD-DISC

VIN3RF

FOCUS DRIVE

VREFH

LPCO2

VIN2RF

VIN8

TRACKING DRIVE

RESET

VIN4RF

DVD-REMOTE

VREF165SLD

VIN1RF

VIN7

STBY

SPDL

LPC

VIN5

PWRCON

VIN6

LPCO1SP-ROT

DVD-SDATADVD-CS

DVD-SPDIF

R191680

C19115P

C19222P

X10127MHz

R1921M

C1180.1

R1952.2K

C197100/6.3V

DVD-AUDIO(R)

DVD-AUDIO(L)

C1950.1

C1960.1

R11215K

R11418K

C1220.1

C1354.7

R11339K

R128430

C1160.1

C329 150P

C328 150P

R29110K

C2230.033

C2250.1

C2260.1

C2315600P

C2300.018

C1300.1

C1310.1

C2220.1

C2110.1

C2370.1

C2390.1

C214560P

MA(0~10)MDQ(0~15)

DVD-AUDIO-MUTE

FADR(0~19)

DVD-SCLK

R20210K

C123220/6.3V C134

220P

C120 1

C1251

C212120P

CD/DVD

NCAS

NCSMNRAS

NWE

DQM1DQM0

DVD-DISC-INDVD-DISC-OUT

SL-ADS

R2411KR2421K

C623 22PDVD-YDVD-PbDVD-Pr

DVD-P-ON

R102BEAD

DQM3

BA1

R14110K

1

2

3

4

G H I J K LDVD MAIN CBA UNIT

EXT MEMORYDATA1EXT MEMORY DATA9

EXT MEMORY DATA2

EXT MEMORY DATA10

GND

VDD(+3.3V)

EXT MEMORY DATA11

EXT MEMORY DATA3

EXT MEMORY DATA12

EXT MEMORY DATA4

EXT MEMORY DATA13

EXT MEMORY DATA5

EXT MEMORY DATA14

EXT MEMORY DATA6

GND

VDD(+3.3V)

EXT MEMORY DATA15

EXT MEMORY DATA7

GND

VDD(+1.2V)

EXT ADR16

EXT ADR15

EXT ADR14

EXT ADR12

EXT ADR13

EXT ADR11

EXT ADR9

EXT ADR10

EXT ADR8

EXT ADR19

EXT WE

GND

VDD(+3.3V)

EXT ADR18

EXT ADR17

EXT ADR7

EXT ADR6

EXT ADR5

EXT ADR4

EXT ADR3

EXT ADR2

EXT ADR1

GND

VDD(+1.2V)

NU

PWRCON

NU

NU

DVD-REMOTE

NU

GND

VDD(+3.3V)

DVD-SCLK

DVD-CS

NU DVD-

SDAT

A

NU NU NU NU DVD-

DISC

-OUT

CD/D

VD

DVD-

DISC

-IN

STBY

LOAD

-DIS

C

SPDL

SLD

GND

VDD(

+3.3

V)

RESE

T

NU NU NU NU NU NU GND

VDD(

+1.2

V)

VDD(

+3.3

V)

PLFI

L1

V-RE

F-H7

GND

V-RE

F-L7

GND

CCAP

A

CDAT

A

VDD(

+3.3

V)

NU NU V-RE

F-L5

V-RE

F-H5

VDD(

+3.3

V)

GND

V-REF(H)

SP-ROT

SL-ADS

TD-OFST

FD-OFST

GND

TRACKING DRIVE

FOCUS DRIVE

VDD(+3.3V)

VDD(+3.3V)

COMP1

V-REF

I-REF1

COMP2

GND

GND

VDD(+3.3V)

VDD(+3.3V)

GND

SDRAM DATA1

SDRAM DATA14

SDRAM DATA15

SDRAM DATA0

VDD(+1.2V)

GND

OSC-OUT

OSC-IN

VDD(+3.3V)

GND

SDRA

MDA

TA13

SDRA

M DA

TA2

GND

VDD(

+3.3

V)

SDRA

M DA

TA12

SDRA

M DA

TA3

SDRA

M DA

TA11

SDRA

M DA

TA4

SDRA

M DA

TA10

SDRA

M DA

TA5

GND

VDD(

+3.3

V)

SDRA

M DA

TA6

SDRA

M DA

TA9

SDRA

M DA

TA7

SDRA

M DA

TA8

SDRA

M DA

TA M

ASK0

SDRA

M DA

TA M

ASK1

SDRA

M WEGND

SDRA

M MC

K

VDD(

+3.3

V)

SDRA

M MC

K

GND

VDD(

+1.2

V)

SDRA

M CA

S

SDRA

M RA

S

SDRA

M CS

SDRA

M BA

0

SDRA

M AD

DRES

S9GND

VDD(

+3.3

V)

SDRA

M AD

DRES

S8

SDRA

M AD

DRES

S10

SDRA

M AD

DRES

S7

SDRA

M AD

DRES

S0

SDRA

M AD

DRES

S6

SDRA

M AD

DRES

S1GND

VDD(

+3.3

V)

SDRA

M AD

DRES

S5

SDRA

M AD

DRES

S2

SDRA

M AD

DRES

S4

SDRA

M AD

DRES

S3GND

VDD(

+1.2

V)

EXT

OE

EXT

CE

EXT

ADR0

EXT

MEMO

RYDA

TA0

EXT

MEMO

RYDA

TA8

FDQ1

FDQ9

FDQ2

FDQ10

FDQ3

FDQ11

FDQ4

FDQ12

FDQ5

FDQ13

FDQ6

FDQ14

FDQ7

FDQ15

FDQ8FDQ0

FADR16

FADR15

FADR14

FADR13

FADR12

FADR11

FADR10

FADR9

FADR8

FADR19

FADR18

FADR17

FADR7

FADR6

FADR5

FADR4

FADR3

FADR2

FADR1

FADR0

30-L2

69-G2

68-G2

75-G2

76-G2

74-G

2

32-L

2

31-L

2

MA3

MA2

MA4

MA5

MA1

MA6

MA0

MA7

MA10 MA8

MA9

27-L

2

26-L

2

25-L

2

24-L

229-I430-G2

32-H431-H4

29-L

2

23-L

2

20-L

2

19-L

2

CONTINUEDVD MAIN 3

33-K1

49-K1

43-J144-J1

66-H1

7-K2

CONTINUEDVD MAIN 1

36-H1

69-G2

74-H1

35-H1

37-K2

34-K1

38-K2

6-K2

48-K1

65-K2

68-G1

40-J1

50-K1

47-K1

CONTINUEDVD MAIN 1

70-I1

76-G1

46-J1

41-J1

45-J1

39-H1

42-J1

CONTINUEDVD MAIN 1

CONTINUEDVD MAIN 3

MDQ7

MDQ8

MDQ6

MDQ9

MDQ5

MDQ1

0

MDQ4

MDQ1

1

MDQ3

MDQ1

2

MDQ2

MDQ1

3

MDQ1

MDQ14

MDQ0

MDQ15

37-G4

38-G4

6-G4

7-G4

64-L4

65-L4

34-G4

33-G4

53-G

3

78-G

2

36-G

4

66-L

4

39-G

4

35-G

4

70-G

2

NU NUNUDVD-

P-ON

NU

43-G

3

44-G

3

46-G

3

45-G

3

40-G

4

42-G

3

41-G

4

CONTINUEDVD MAIN 3

CONTINUEDVD MAIN 1

47-G3

48-G3

49-G3

50-G3

MICROCONTROLLER

75-G1

NU

GND

NU

NU

NU

VDD(+3.3V)53-H1

25-I424-I4

27-I4

CONTINUEDVD MAIN 3

19-J4

26-I4

23-I4

20-J4

CONTINUEDVD MAIN 1

78-H179-H1

64-K2

79-G

2

72-I172

-G2

28-I4

22-I4

SDRA

M BA

128

-L2

22-L

2SD

RAM

DATA

MAS

K3

FL11.11SCDV2

DVD Main 2 Schematic Diagram

11-18

0.1C561

R56747

R56547

300R106

FADR(0~19)

EV+3.3V(D)

EXT-WE

DVD-SPDIF

EXT-CE

DVD-Y

EXT-OE

1

2

3

4

5

6

7

9

10

8

11

12

13

15

16

14

17

18

19

20

21

30

28

27

42

29

26

25

40

39

24

23

22

41

38

37

36

34

33

35

32

31

43

44

48

45

46

47

IC103MX29LV160DBTI-70G

22PC608

22PC620

10 GND

16 DVD-SPDIF

13 DVD-AUDIO-MUTE14 DVD-AUDIO(R)

9 GND

12 DVD-AUDIO(L)

8 DVD-Y

11 GND

RESET

0.1R604

15 GND

DVD-AUDIO-MUTER624 0

DVD-AUDIO(R)

DVD-AUDIO(L)

R623 0

R621 0

L6180

2.2KR611

0.01C610

FDQ(0~15)

MA(0~10) MDQ(0~15)

0.1C625

100PC604

100PC603

22PC613

DVD-Pb

5 GND

DVD-Pr

CN6014 DVD-Pr

7 GND6 DVD-Pb

L104 BEAD

L614BEAD

L613BEAD

L612BEAD

0C612

L5010

C504220P

C5010.1

680PC514

C5060.1

C505100P

C502180P

C513100P

C503150P

0.1R604

1 2 3 4 5 6 7 9 108 11 12 13 15 1614 17 18 19 20 21

30 28

27

42 29

2625

40 39

242322

41 38 37 36 34 3335 32 31434445464748495051525354

IC503EM638165TSA-6G

R51047K

NCAS

DQM0

BA1

NWE

BA0

DQM3

NRAS

MCK

NCSM

DQM1

DQ14

A8

NU

A14

VSS

VCC

DQ9

A15

DQ7

A17

NU

A13

(FLASH ROM)

A16

DQ4

DQ2

DQ15/A-1

A19

A0

A7

A18

OE

A12

DQ12

VSS

DQ10

NU

A6

A11

DQ5

BYTE

DQ3

WE

A5 DQ0

A2

A10

DQ13

DQ11

A4

DQ8

A9

A1

DQ6

RP

CE

A3

DQ1

1

2

3

4

M N O P Q R

FADR15

FADR14

FADR13

FADR12

FADR11

FADR10

FADR9

FADR8

FADR5

FADR1

FADR4

FADR7

FADR0

FADR6

FADR3

FADR2

FDQ0

FDQ8

FDQ1

FDQ9

FDQ2

FDQ10

FDQ3

FDQ11

FDQ7

FDQ14

FDQ6

FDQ13

FDQ5

FDQ12

FDQ4

FDQ15

FADR16

FADR19

FADR18

FADR17

CONTINUEDVD MAIN 2

CONTINUEDVD MAIN 1

DVD MAIN CBA UNIT

NUTO POWER SUPPLY CBA CN902

CONTINUEDVD MAIN 1

CONTINUEDVD MAIN 2

CONTINUEDVD MAIN 2

2-M2

DQ12

MDQ12

VSSQ

MDQ13

DQ8

MA5

DQ6

MA7

MDQ4

UDQM

VDQD

6-M2

MA1

A1

DQ10

MA10

DQ14

MA2

DQ3

A10/AP

9-M2

VSS

MDQ3

DQ4

BA1

8-M2

A2DQ2

VDDQ

DQ7

VDD

DQ5

3-M2

A8

MDQ10

RAS

7-M2

CLK

MDQ6

VDDQVSS

MDQ0

MA3

5-M2

DQ0

MDQ15

MA4

CAS

A7

MDQ14

MA9

MA8

LDQM

VDD

(SDRAM)

VDDQ

MDQ8

NUVSS

MA0

VSSQ

DQ9

MDQ11

A5

VDD

VSSQ

BA0

A0

MDQ2

WE

A9

DQ13

MDQ7

10-M2

A6

MDQ9

UDQMCKE

DQ15

MDQ1

1-M2

A3CS

A4NU

11-M2

DQ11

MDQ5

VSSQ

DQ1

MA6

7-O3

5-O36-O3

1-O32-O4

10-O3

3-O4

11-O4

CONTINUEDVD MAIN 2

9-O38-O3

FL11.11SCDV3

DVD Main 3 Schematic Diagram

11-19

TM601

TM602

1

2

BA94F0F0102 6 B

C7A3 A3 BA94F0F0102 6 A

TOOL NO.

1 2 3 4 5 6 7 8 9 10

/

/WHITE

/BLACK

/RED

RISK OF FIRE-

REPLACE FUSE AS MARKED

/RED

/WHITE

/RED

/WHITE

/ORANGE

/RED

/WHITE

/RED

/BLUE

/GREEN

/RED

/WHITE

/YELLOW

BLACK

JA01F0MPWE234498

91

F601

4A/125V

A B C E

3

D

4

F GCOLD

A B C E

3

D

4

F

CN602

HOT

A B C E

3

D

4

F

HOT

3.5Vfor1.8V

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

DNGDNG

GND

ALL3.3V

ALL3.3V

ALL3.3V

TUNER 5V

TUNER 5V

TUNER 5V

P-ON 5V

P-ON 5V

P-ON 3.3V

P-ON 3

.3V

P-ON 3.3V

P-ON 3.3V

AMP 13V

AMP 13VMOTOR 10V

36V

36V

D5.5V

D5.5V

GND

5.5Vfor3.3V

6.7V

6.7V

3.5Vfor1.8V

3.5Vfor1.8V

PROTECT1

PROTECT1

PROTECT1

LCD

16V

LCD

16V

LCD

16V

LCD 16V

LCD

16VVG

H

LCD -6V

LCD

-6V

RESET

KEY-IN1

SPDIF

A-MUTE

S-Y

V-L

P-ON 9V

SW 9V

PC-L

PC-R

SW 9V

HDMI-R HDMI-L

HDMI-L

COMP-L

COMP-Y

COMP-Pr

COMP-Pb

A-OUT-L

A-OUT-R

A-OUT-MUTE

P-ON-H2

OE2

BL-SW

BL-SW

BL-ADJ

VCOM-PWM

P-ON-H1

PROTECT3

KEY-IN2

DVD-LED

GND

VCCA

ERRORAMP-MUTE

GND

AOUT-L

ALL6V

LOW-VOL PROTECT

KEY-IN2

ALL6V

DVD-LED

FG

GND

KEY-IN2

KEY-IN2

DVD-LED

DVD-LED

REMOTE-OUT

DVD-SDATA

GND

SPDIF

GND

GND

GND

PROTECT3

BL-ADJ

36V

RESET

LCD

-6VLCD 16V

PROTECT2

GNDGN

D

GND

LOW-VOL PROTECT

MOTOR 10V

D5.5V

GND

GND

DVD

3.3V

ALL3.3V

D5.5V

P-ON 5V

GND

6.7V

ALL3.3V

AOUT-R

V-R

V-L

V-R

GND

GND

P-ON 3.3V

GND

GND

SEL-R

GND

SEL-L

OPAMP 9V

OPAMP 9V

GND

LCD

24V

ALL6V

VT 31V

VT 31V

A-MUTE

GND

GND

A-MUTE

GND

AMP 13V

J318

J319

J126

R402

J127 J128

R210

R405

R212

R407

JS304

J322

J323

J324

J130

J325

R601

J326

R602

J327

J133

R603

J328

J134

R604

J329

R605

CN201

J136

R606

R607

J139

R223

J330

R224

BC841

J333

R227

J334

J140

R610

R228

J335

J141

R611

R229

J142

J143

R613

J144

R614

J145

R615

R616

J147

R617

J148

R618

J149

Q871

R235

CN601

Q872

R236

R237

J150

R238

J151

R239

J152

J153J154

R819

J155

J157

C204

R240

J159

CN801

CN802

R242

R243

R244

R245

R247

J160

J161

L871

J162

J164

C210

J166

J167

R637

J168

R638

R639

J169

FH601

C601

C219

C602

FH602

C603

J170

C604

J171

J172

C220

R645

C609

JK841

C222

R646

J177

C223

C224

J179

C225

C610

C611

C612C6

13

J180

R650

J181

J182J183

R653

J184

J185

J186

J187

J188J189

C814

C816

J190

J191

C819

R661

J192

J194

J195

R665

J196

R666

R667

J199

C823

C631

C632

C633

C827

R670

C634

R671

R672

R673

C637

C638

R674

C639

JK871

JK872

R677

R678

C832

C640

C642

C643

C644

C645

C646

R682

C647

R683

R684

R878

C648

R685

D202

R686

D203

R687

R688

D204

D205

R689

D206

D207

C844

D208

C650

D209

C652

C653

C654

C655

R691

D401

R692

D402

C656

R693

C657

D403

R694

D404

D210

D211

R695

D405

Q501

D406R696

R697

D407

D408

D409D601

L301

D602

D603

D410

D604

D411

D412

D606

D607

D413D608

D414

D415

D609

D416

D417

D418

D419

D801

BC301

D802

D803

D804

D610

Q901

D611

D806

D612

Q902

D807

Q903

Q904

Q905

IC601

L901

T601

C880

C691

D631

D632

C692

C693

D633

C694

J200

D634

D635

J202

J203

D637

J204

D638

J205

D639

J206

J207

J208

J209

D640

D641

D642

D643

J210

D644

J211

D645

J212

D646

J213

D647

J214

D648

J215

D649

J216J217 J218

J219

CL701A

CL701B

D650

JS201

IC631

Q171

D651

Q172

D652

D653

D655

J221J222 J223

D657

J224

J225

R501

J226

J227J228

CN101

D660

D661

D662

D664

J231

D665

J232

D666

D667

CN301

CN302

CN303

J238

JK711

D670

D671

D673

J240

D674L951

Q771

J242

Q772

J245

R909

J246J247

J248 J249

JK721

JK722

R912

R913

J250

R914

J251R915

J252

J253

R917

J254

J255

R919

J256J257J258

J259

CN901

JK731

CN902

JK732

JK733

R920R921

R922R923

J260

R924

J261

R925

C501

J262

R926

J263

R927

J264

R928

J265

R929

J267

J268

J269

JK741

JK742

R930

R931

J270

J272

J273

J274

J275

J276

J278

JK751

JK752

JK753

JK754

J280

R175

J281

J284

J285

J286

J287

J288

C910

J289

C911

C912

C916

C917

J290

C918

J291

C919

J292

J293

R763

J294

J295

SA601

J296

J297

J298

J299

R771

Q201

Q202

Q203

Q204

R780

Q205

R781

Q206

Q207

Q208

Q209

D301

D303

R788

Q401

Q402

Q210

Q211

Q212

R790

AC601

R791

Q601

Q602

C951

Q801

Q802

D901

L601

D902

L602

D903

D904

D905

C771

D906

D907

D908

D909

L801

BC601

L802

L803 L804

BC801

BC802

BC803

BC804

BC805

J101

J102

Q633

J104

J105

Q635

IC901

J106

Q636

J107

Q637

J108

Q638

J109

Q639

J300

J301

J302

J303

J304

J110

Q640

J111

Q641

J306

J112

Q642

J307

Q643

Q644

J114

J309

J115

J116

J117

J118

J119

J310

R204

JS101

Q841

J312

JS102

J313

J120

J121

J316

J122

J317

J123

36V

J305

INPUT0J175

J315

J337

GND

3.5Vfor1.8V

J135

GND

J132

GND

J131

GND

J103

GND

J113

GND

J129

KEY-IN1

J146

P-ON 5

VJ124

GND

Q634

J197

J198

J332

GNDJ173

INPUT1J178

J331

GND

J163

J338

RESETJ311

J336

D420

RESET

AMP 13V

AMP 13V

J339

C676

JS631

GND

J176

R821

PROTECT2

J137

Q873

Q874

J229

J230 J233

J234

J235

J237

J239

J241

J243

J244

J340

ALL3.3V

P-ON 3

.3V

J125

6.7VJ174

GND

J271

PROTECT1J236

D421

J341

C605

P-ON-H2

R203R249

J320

GND

J314

OE2

JS202

J308

R409

R660

R662

R663

R664R698

D658

D659

JS301 JS302

JS303

J156J158

TU301

J165 C303

C306

D302

TUNERA S

J343

J342

R636

C675

D675

D676

R699

R700

Q631

JS138

D620

D621

1

228

29

1

228

29

1

228

29

1 8

1

9

1

226

25

12

1514

1

2

13

12

BA94F0F01026

Power Supply CBA & Jack CBA Top ViewBecause a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing.Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required.




CAUTION ! :


Power Supply CBAJack CBA

11-20

19

F601

4A/125V

ABCE

3

D

4

FG

COLD

ABCE

3

D

4

F

CN602

HOT

ABCE

3

D

4

F

HOT

3.5Vfor1.8V

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GNDGND

GND

ALL3.3V

ALL3.3V

ALL3.3V

TUNER 5V

TUNER 5V

TUNER 5V

P-ON 5V

P-ON 5V

P-ON 3.3V

P-ON 3.3V

P-ON 3.3V

P-ON 3.3V

AMP 13V

AMP 13VMOTOR 10V

36V

36V

D5.5V

D5.5V

GND

5.5Vfor3.3V

6.7V

6.7V

3.5Vfor1.8V

3.5Vfor1.8V

PROTECT1

PROTECT1

PROTECT1

LCD 16V

LCD 16V

LCD 16V

LCD 16V

LCD 16V

VGH

LCD -6V

LCD -6V

RESET

KEY-IN1

SPDIF

A-MUTE

S-Y

V-L

P-ON 9V

SW 9V

PC-L

PC-R

SW 9V

HDMI-R

HDMI-LHDMI-L

COMP-L

COMP-Y

COMP-Pr

COMP-Pb

A-OUT-L

A-OUT-R

A-OUT-MUTE

P-ON-H2

OE2

BL-SW

BL-SW

BL-ADJ

VCOM-PWM

P-ON-H1

PROTECT3

KEY-IN2

DVD-LED

GND

VCCAERROR

AMP-MUTE

GND

AOUT-L

ALL6V

LOW-VOL PROTECT

KEY-IN2

ALL6V

DVD-LED

FG

GND

KEY-IN2

KEY-IN2

DVD-LED

DVD-LED

REMOTE-OUT

DVD-SDATA

GND

SPDIF

GND

GND

GND

PROTECT3

BL-ADJ

36V

RESET

LCD -6V

LCD 16V

PROTECT2

GND

GND

GND

LOW-VOL PROTECT

MOTOR 10V

D5.5V

GND

GND

DVD 3.3V

ALL3.3V

D5.5V

P-ON 5V

GND

6.7V

ALL3.3V

AOUT-R

V-R

V-L

V-R

GND

GND

P-ON 3.3V

GND

GND

SEL-R

GND

SEL-L

OPAMP 9V

OPAMP 9V

GND

LCD 24V

ALL6V

VT 31V

VT 31V

A-MUTE

GND

GND

A-MUTE

GND

AMP 13V

J318

J319

J126

R402

J127J128

R210

R405

R212

R407

JS304

J322

J323

J324

J130

J325

R601

J326

R602

J327

J133

R603

J328

J134

R604

J329

R605

CN201

J136

R606

R607

J139

R223

J330

R224

BC841

J333

R227

J334

J140

R610

R228

J335

J141

R611

R229

J142

J143

R613

J144

R614

J145

R615

R616

J147

R617

J148

R618

J149

Q871

R235

CN601

Q872

R236

R237

J150

R238

J151

R239

J152

J153

J154

R819

J155

J157

C204

R240

J159

CN801

CN802

R242

R243

R244

R245

R247

J160

J161

L871

J162

J164

C210

J166

J167

R637

J168

R638

R639

J169

FH601

C601C219

C602

FH602

C603

J170

C604

J171

J172

C220

R645

C609

JK841

C222

R646

J177

C223

C224

J179

C225

C610

C611

C612

C613

J180

R650

J181

J182

J183

R653

J184

J185

J186

J187

J188 J189

C814

C816

J190

J191

C819

R661

J192

J194

J195

R665

J196

R666

R667

J199

C823

C631

C632

C633

C827

R670

C634

R671

R672

R673

C637

C638

R674

C639

JK871

JK872

R677

R678

C832

C640

C642

C643

C644

C645

C646

R682

C647

R683

R684

R878

C648

R685

D202

R686

D203

R687

R688

D204

D205

R689

D206

D207

C844

D208

C650

D209

C652

C653

C654

C655

R691

D401

R692

D402

C656

R693

C657

D403

R694

D404

D210

D211

R695D405

Q501

D406 R696

R697

D407

D408

D409D601

L301

D602

D603

D410

D604

D411

D412

D606

D607

D413D608

D414

D415

D609

D416

D417

D418

D419

D801

BC301

D802

D803

D804

D610

Q901

D611

D806

D612

Q902

D807

Q903

Q904

Q905

IC601

L901

T601

C880

C691

D631

D632

C692

C693

D633

C694

J200

D634

D635

J202

J203

D637

J204

D638

J205

D639

J206

J207

J208

J209

D640

D641

D642

D643

J210

D644

J211

D645

J212

D646

J213

D647

J214

D648

J215

D649

J216J217J218

J219

CL701A

CL701B

D650

JS201

IC631Q171

D651

Q172

D652

D653

D655

J221J222J223

D657

J224

J225

R501

J226

J227J228

CN101

D660

D661

D662

D664

J231

D665

J232

D666

D667

CN301

CN302

CN303

J238

JK711

D670

D671

D673

J240

D674L951

Q771

J242

Q772J245

R909

J246J247

J248

J249

JK721

JK722

R912

R913

J250

R914

J251R915

J252

J253

R917

J254

J255

R919

J256J257 J258

J259

CN901

JK731

CN902

JK732

JK733

R920

R921

R922R923

J260

R924

J261

R925

C501

J262

R926

J263

R927

J264

R928

J265

R929

J267

J268

J269

JK741JK742

R930

R931

J270

J272

J273

J274

J275

J276

J278

JK751

JK752

JK753

JK754

J280

R175

J281

J284

J285

J286

J287

J288

C910

J289

C911C912

C916

C917

J290

C918J291

C919

J292

J293

R763

J294

J295

SA601

J296

J297

J298

J299

R771

Q201

Q202

Q203

Q204

R780

Q205

R781

Q206

Q207

Q208

Q209

D301

D303

R788

Q401

Q402

Q210

Q211

Q212

R790

AC601

R791

Q601

Q602

C951

Q801

Q802

D901

L601

D902

L602

D903

D904

D905

C771

D906

D907

D908

D909

L801

BC601

L802

L803L804

BC801

BC802BC803

BC804

BC805

J101 J102

Q633

J104

J105

Q635

IC901

J106

Q636

J107

Q637

J108

Q638

J109

Q639

J300

J301

J302

J303

J304

J110

Q640

J111

Q641

J306

J112

Q642

J307

Q643

Q644

J114

J309

J115

J116

J117

J118

J119

J310

R204

JS101

Q841

J312

JS102

J313

J120

J121

J316

J122

J317

J123

36VJ305

INPUT0J175

J315J337GND

3.5Vfor1.8VJ135

GNDJ132

GNDJ131

GND

J103

GND J113

GNDJ129

KEY-IN1

J146

P-ON 5VJ124

GND

Q634

J197

J198

J332

GNDJ173

INPUT1J178

J331

GND

J163

J338

RESET J311

J336

D420

RESET

AMP 13V

AMP 13V

J339

C676

JS631

GND

J176

R821

PROTECT2

J137

Q873

Q874

J229J230J233

J234

J235

J237

J239

J241

J243

J244

J340

ALL3.3V

P-ON 3.3VJ125

6.7V J174

GND

J271

PROTECT1J236

D421

J341

C605

P-ON-H2

R203

R249

J320

GND

J314

OE2

JS202

J308

R409

R660

R662

R663

R664

R698D658

D659

JS301JS302

JS303

J156 J158

TU301

J165C303C306

D302

TUNERAS

J343

J342

R636C675

D675

D676

R699

R700

Q631

JS138

D620

D621

1

228

29

1

228

29

1

228

29

18

1

9

1

226

25

1 2

15 14

1

2

13

12

R401R403

R404

R211

R406

R213

R214

R408

R215

R216 R217

R218

R219

R410

R411

R412

R220

R221 R222

R801

R225

R802

R226

R803

R804R805

R806

R807

R808R809

R231

R232

R233

R810

R234

R811

R812

R813

R814

R815

R816

R817

R818

C201

C202

C203

R241

C206

C207

R820

C208

C209

R248 C402

C212C213C214

C215

IC771

C216

C217C218

R641R642

R643

R644

C221

R647

R648

R649

C801

C802C803

C804C805

R841

C806

R842

C807

R843

C808

R844

R651

C809

R845

R846

R652

R847

R848

C810

R658

C811

R659

C813

C815

C817

C818C820

R668

C821

R669

C822

C824

C825C826

C828

C829

R675R676

C830

R679C833

C834

C835

R871

C641

C836R872

C837

R873

C838

R680

R874

C839

R875

R681

R876

R877

R879

C841

C842

C843

R880

C845

C651

R881

C846

R882

C847

R883

R884

R690

R885

R886

R891

R892

IC201

C871

C872

C873

C874

C875

C682

C876

C683

C877

C684

C878C879

IC801

C882C883

C884

C885

R901R902R903

R904

R905

R711

R712

R906

R907

R713

R908

R714

R715

R716

R910

R911

R721

R722

R723

R918

R724

R725

R726

R731

R732

R733

R734R735

R736

IC871

C701

C702

C703C704

R741

R742

R743

R744

R745

R746

C901C902

C903

C904

R171

C905

R172

C906

R173

C907

R174

C908

R751

C909

R752

R753R754

R755

R756R757

R758R759

C913

C914

C721

C915

C722

C723

C724

R760

R761

R762

C731

C732

C733

C735

C736

R772

R773

R774

R775

R776

R777

R778

R779

C741

C742C743

C744

R782

R783

R784

R785

R786

R787

R789

C751C752

C753C754

C755

C756

R792

C757

R793

C758R794

R795

C761

C762C772

C773

C775

C776

R201

R202

R205

R206

R207

R208

R209

IC951

R916

R951R952

R953

R954R955R956

R957

R958R959

R960C952

C953

C954

C955

C956

C957

C958

C959C960

R654

C734

R887

R888 R893

18

9 16

14

58

L302

L303

C681

R301

R302

R303

R304R305

R306

R307

R308

R309

R310

R311

C301

C302

C304

C305

C307

C308

C309C310

C311

14

5 8

14

85

122

4432

WF1PIN 4 OF CN302

WF3PIN 6 OF CN302

WF1PIN 4 OF CN302

WF3PIN 6 OF CN302

WF2PIN 8 OF CN302

WF7PIN 13 OF CN302

WF4PIN 15 OF CN302

WF5PIN 17 OF CN302

WF6PIN 19 OF CN302

PIN 11 OFCN902

WF12PIN 13 OFCN902

WF13PIN 3 OFCN902

WF9PIN 9 OFCN902

WF11PIN 5 OFCN902

WF8PIN 1 OFCN902

WF10

Power Supply CBA & Jack CBA Bottom View

BA94F0F01026

Because a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing.Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required.




CAUTION ! :


Power Supply CBA Jack CBA

11-21

CN10

1

CL102A

C7A3 A3

C7A3 A3

/GREEN

/RED

/ORANGE

1 2

3 4

5TO

OL N

O.

BA01F4F0103 2 DBA01F4F0103 2 C

BA01F4F0103 2 B

C7A3 A3

BA01F4F0103 2 A

C7A3/A3

6 7

8 9

10

E234498A01F0MIV J

HOT

COLD

T195

0

VOLUP VOL

DOWN

MENU

CHUP

CHDOWN

POWE

R

VOL

DOWN VO

LUP

MENU

CH DOWN CH UP

EJEC

T

STOP

PLAY

POWER

PATTERN

AGIN

G

STD BY

DVDPOWER STB BY

GND

GND

GND

GND

GND

GND

GND

GNDGND

GND

GND

GND

GND

GND

GND

GND

GND

FG

FG

GND

VREF

VREF

PROTECT3

BL-ADJ.

A

B

C

D

1 2 3 4 5 6

VREF

PANE

L+13

V

BL-SW

BL-SW

CL10

1B

CL102B

CL10

3A

CL10

3B

CL103C

R101

R108

R109

R111R112R113R114

R115

R123

R124

R127

R128

RS101

SW101B

RS102

SW154SW155

C101

C108 C113R1

51

R152

SW103B

R153

R154

R155

R156

SW104BSW105BSW106B

C151

SW107BD101

D104D105 D106

D107

D151

GND

GND

GND

GND

GND

GND

J103

J102

J101

VREF

GND

C1500

J1020

Q1500

J1021

Q150

1

BC1301

J1022

Q150

2

J1023

Q150

3

J1025

J1026

J1027

J1028

CN1900

J1029

BC15

00

BC1501

J1030

J1031

J103

2

J1033

J1034

J1035

J1036 J1037 J1038

D111

0

J1039

C1905

D111

1

C1906

D111

2

D111

3

D1114

D111

5

D111

6

D1117

J1040

D150

0

D111

8

J1041

D1119

R111

5

J1042

J1043J1044

C1910

J1045

R150

1

J1046

J1047 J1048

R150

4

D112

0

CN1150

J1049

D1121

D112

3

D112

4

D170

0

R1121

D170

1

D170

2D1

703

J1051

J1052

J1053

J1054

J1055

J1056

J1057

J1058

J1060J1062

J1064C1930

J106

5

C1931

J1066

C1932

C1162

C1933

C1163

Q1160

C193

4

Q1930

Q116

1

J1069

Q193

1

Q1932

C1166

C1167

C1550J1070

Q1550

Q155

1

J1072

Q155

2

J1073

Q1553

J1074

C194

0

BC1930

T1100

BC1931

J1078

J107

9

BC1550

BC1551

J1080

J1081

J108

2

J108

3

J1085

J108

6

J108

7

J1088

D1930

D116

0

J1089

D1931

D1161

D1932

D1162

D1933

D116

3

D1934

R193

0

D1164

D1935

R1931

D1165

R1932

D116

6

R1933

D116

7

J109

0

D155

0

R1934

D116

8

J109

1

R1935

D1169

R1165

R1936

J109

3

R1937

J109

4

R155

0

IC1930

R155

1

R1939

IC1931

R1552

R1553

J109

8

R155

4

D1940

D117

0

J109

9

D117

1

D117

2

D117

3

D1174

R1940R1941

R1171

R194

2R1946

R1947

C1970

R1948

Q1970

Q1972

C198

2

C198

3

D1960

D1961

R196

7

R196

8

C1990

T1150

R1969

C199

2

D1970

D1971

D1973

R1970R1971

R198

3

R1984

R1987R198

8

D1994

CN1001

CN1003

C1000

CN1200

Q100

1

Q1003

Q1004

J110

0

Q1005

J110

1

C1009

J110

2

J110

3

J1104

J1105

J1106

J1107

C1204

J1108

C120

5

J1109

C1012

J111

0

J1111

J1112J1113

C1212

C1213

Q1210

Q1211

C1216

C1217

D1000

D100

1

D100

2

D1003

J112

0

D100

4

Q160

0

J112

1

D1005

D1006

J1122

J1123

J112

4

J112

5

R1005J1

126

R1006

J112

7

J1128

C1800

C1801

J1129

Q180

0

Q1801

Q1802

Q1803

Q1804

J113

1

J113

2

J1134

J113

5

SW151 SW101A

J113

6

SW152SW153

R1018

D1210

D1211

R1019

D1212D1213

D1214

CN1050

D1215

D1216

D1217

D1218

Q181

5

D121

9

Q1621

R1021

R1215

C105

0

D122

0

C105

1

D122

1

C105

2

D122

2

C1053

D122

3

C105

4

D122

4

C1055

D1801

R122

1 C1056

D180

2

R1032

R180

4

R1035

SW103A

R180

5

R1036

C106

2

C1063

Q106

0

D104

0

Q1061

C1066

C1067

R181

0

R1040

R181

1

R1041

R1812

R1043

R1044

R1045

SW104A

D1050 D105

1

R1050

D1630

R1051

T1200

SW105A

D1060

D1061

D106

2

D106

3

D106

4

D106

5

D1066 D106

7

D106

8

SW106A

R106

5

D106

9

D107

0

D1071

D1072

D107

3

D107

4

R1071

SW107A

T1050

CN1100

J1001J1002

J1003

J100

4

J1005J100

6

J1007

J100

8

J1009J1010 J1

011

J1012J1013

J1014

J1015

J1016

C1112

J1017

C1113

J1018

Q111

0

J1019

Q111

1

C1116

C111

7

J1050

J109

5

J109

6

J109

7

R1803

GND

D1990

J1067

J1068

CN1005

J1071

J107

5

J1061

J1063

J105

9

D197

2

R1990

R198

9

R199

1

R1944

R1943

R1945

Q1971

J107

6

J107

7

C1061C1065

C1165C1115C1111

C1161 C1211 C1215

R1503

R150

2

D112

2

J108

4

GND

EER35

1

210

11

1

2 14

15

1

2 10

11

BA01F4F01032

Inverter CBA, Function CBA & IR Sensor CBA Top ViewBecause a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing.Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required.


Function CBA Not Used

Inverter CBA

Not UsedIR Sensor CBA Not Used

11-22

HOT

COLD

T1950

VOLUPVOL

DOWN

MENU

CHUP

CHDOWN

POWER

VOLDOWN

VOLUPMENUCHDOWN

CHUP

EJECT

STOP

PLAY

POWER

PATTERN

AGING

STD BY

REWOPDVDSTB BY

GND

GND

GND

GND

GND

GND

GND

GND GND

GND

GND

GND

GND

GND

GND

GND

GND

FGFG

GND

VREF

VREF

PROTECT3

BL-ADJ.

A

B

C

D

123456

VREF

PANEL+13V

BL-SW

BL-SW

CL101B

CL102B

CL103A

CL103B

CL103C

R101

R108

R109

R111 R112 R113R114

R115

R123

R124R127 R128

RS101

SW101B

RS102

SW154 SW155

C101

C108C113

R151

R152

SW103B

R153

R154

R155

R156

B601WSB501WSB401WS

C151

SW107BD101

D104D105D106

D107

D151

GND

GND

GND

GND

GND

GND

J103

J102

J101

VREF

GND

C1500

J1020

Q1500

J1021

Q1501

BC1301

J1022

Q1502

J1023

Q1503

J1025

J1026

J1027

J1028

CN1900

J1029

BC1500

BC1501

J1030

J1031

J1032

J1033

J1034

J1035

J1036J1037J1038

D1110

J1039

C1905

D1111

C1906

D1112

D1113

D1114

D1115

D1116

D1117

J1040

D1500

D1118

J1041

D1119

R1115

J1042

J1043

J1044

C1910

J1045

R1501

J1046

J1047

J1048

R1504

D1120

CN1150

J1049

D1121

D1123

D1124

D1700

R1121

D1701

D1702D1703

J1051

J1052

J1053

J1054

J1055

J1056

J1057

J1058

J1060J1062

J1064

C1930

J1065

C1931

J1066

C1932

C1162

C1933

C1163

Q1160

C1934

Q1930

Q1161

J1069

Q1931

Q1932

C1166

C1167

C1550 J1070

Q1550

Q1551

J1072

Q1552

J1073Q1553

J1074

C1940

BC1930

T1100

BC1931

J1078

J1079

BC1550

BC1551

J1080

J1081

J1082

J1083

J1085

J1086

J1087

J1088

D1930

D1160

J1089

D1931

D1161

D1932

D1162

D1933

D1163

D1934

R1930

D1164

D1935

R1931

D1165

R1932

D1166

R1933

D1167

J1090

D1550

R1934

D1168

J1091

R1935

D1169

R1165

R1936

J1093

R1937

J1094

R1550

IC1930

R1551

R1939

IC1931

R1552

R1553

J1098

R1554

D1940

D1170

J1099

D1171

D1172

D1173

D1174

R1940

R1941

R1171

R1942R1946

R1947

C1970

R1948

Q1970

Q1972C1982

C1983

D1960

D1961

R1967

R1968

C1990

T1150

R1969

C1992

D1970

D1971

D1973

R1970 R1971 R1983

R1984

R1987

R1988

D1994

CN1001

CN1003

C1000

CN1200

Q1001

Q1003

Q1004

J1100

Q1005

J1101

C1009

J1102

J1103

J1104

J1105

J1106

J1107

C1204

J1108

C1205

J1109

C1012

J1110

J1111

J1112J1113

C1212

C1213

Q1210

Q1211

C1216

C1217

D1000

D1001

D1002

D1003

J1120

D1004

Q1600

J1121

D1005

D1006

J1122

J1123 J1124

J1125R1005

J1126

R1006

J1127

J1128

C1800

C1801

J1129

Q1800

Q1801

Q1802

Q1803

Q1804

J1131

J1132

J1134

J1135

SW151SW101A

J1136

SW152 SW153

R1018

D1210

D1211

R1019

D1212

D1213

D1214

CN1050

D1215

D1216

D1217

D1218Q1815

D1219

Q1621

R1021

R1215

C1050

D1220

C1051

D1221

C1052

D1222

C1053

D1223

C1054

D1224

C1055

D1801

R1221

C1056

D1802

R1032

R1804

R1035

SW103A

R1805

R1036

C1062

C1063

Q1060

D1040

Q1061

C1066

C1067

R1810

R1040

R1811

R1041

R1812

R1043

R1044

R1045

SW104A

D1050

D1051

R1050

D1630

R1051

T1200

SW105A

D1060

D1061

D1062

D1063

D1064

D1065D1066

D1067

D1068

SW106A

R1065

D1069

D1070

D1071

D1072

D1073

D1074

R1071

SW107A

T1050

CN1100

J1001J1002

J1003

J1004

J1005

J1006J1007

J1008

J1009J1010

J1011

J1012 J1013

J1014

J1015

J1016

C1112

J1017

C1113

J1018

Q1110

J1019

Q1111

C1116

C1117

J1050

J1095

J1096

J1097

R1803

GND

D1990

J1067

J1068

CN1005 J1071

J1075

J1061

J1063

J1059

D1972

R1990

R1989

R1991

R1944

R1943

R1945

Q1971

J1076

J1077

C1061C1065

C1165 C1115C1111

C1161C1211C1215

R1503

R1502

D1122

J1084

GND

EER35

1

210

11

1

214

15

1

210

11

CN101

CL102A

1

16

8

9

R102R103

R106

R125

R126

C102C103

C104

C105 C110

C111C112

C114

C115

17

8 14

C1118

C1501

C1502

C1122

C1702

C1703

R1110

R1111

R1113

R1114

R1116

R1117

R1500

R1118 R1119

R1505

R1506

R1120

R1122

R1700

R1701

IC1700

C1164

C1551

C1552

R1160

R1161

R1162R1163

R1164

R1555

R1556

C1981

R1972

R1973

R1975

R1976

R1977

R1981

R1982

C1001

C1002

C1003

C1004

C1007

C1010

C1013

C1214

C1600

C1601

R1001

R1002R1003 R1004

R1007

R1008

IC1000

R1009

C1802

R1015

R1016R1017

C1040

R1210

C1620

R1211

R1212

R1213

R1214

R1022

R1024

R1600

R1025

R1601

R1800 R1801

R1802

R1033

R1034

R1806

R1807

R1808R1809

C1064

C1068

R1042

R1620

R1621

C1072

R1630

R1631

R1060

R1061

R1062

R1063R1064R1066

R1067

R1068R1069

R1070

R1072

C1114R1112

C1005

C1006

C1008

C1011

R1010R1011

4101

R21

01R

R1020

R1023

R1026

R1027R1028

R1030

R1031

R1080R1081

C1014

C1168C1172

R1166R1167

R1168

R1169

R1170

R1172

C1218

C1222

R1216

R1217R1218

R1219

R1220

R1222

R1013

R1029R1974

R1979

R1980

R1986

H.V. CAUTION

BA01F4F01032

Inverter CBA, Function CBA & IR Sensor CBA Bottom ViewBecause a hot chassis ground is present in the power supply circuit, an isolation transformer must be used when repairing.Also, in order to have the ability to increase the input slowly, when troubleshooting this type of power supply circuit, a variable isolation transformer is required.


Function CBA

Inverter CBA

Not Used IR Sensor CBANot UsedNot Used

WAVEFORMS

FL11.11WF112-1

Input: NTSC Color Bar Signal (with 1kHz Audio Signal)

WF1 ~ WF7 = Waveforms to be observed atWaveform check points.(Shown in Schematic Diagram.)

CVBS 0.2V 20µs

WF1 Pin 4 of CN302

S-VIDEO-Y 0.2V

WF2 Pin 8 of CN302

20µs

S-VIDEO-C 0.2V

WF3 Pin 6 of CN302

20µs AUDIO 0.1V 0.5ms

WF7 Pin 13 of CN302

VIDEO-Pr 0.2V 20µs

Pin 19 of CN302WF6

VIDEO-Pb 0.2V 20µs

Pin 17 of CN302WF5

VIDEO-Y 0.2V 20µs

Pin 15 of CN302WF4

FL11.11WF2

Input: NTSC Color Bar Signal (with 1kHz Audio Signal) DVD Video (Play MODE)

WF8 ~ WF13 = Waveforms to be observed atWaveform check points.(Shown in Schematic Diagram.)

WF8 Pin 5 of CN902

WF9 Pin 3 of CN902

WF11 Pin 9 of CN902

Pin 13 of CN902WF13

Pin 11 of CN902WF12

20µs0.5VDVD-Y

DVD-Pb 0.5V 20µs

WF10 Pin 1 of CN902

DVD-Pr 0.5V 20µs

DVD-AUDIO(L) 0.5V 0.5ms

DVD-AUDIO(R) 0.5V 0.5ms

DVD-SPDIF 1V 0.1µs

12-2

FL11.11WI113-1

INV

ER

TE

R C

BA

TU

301

TU

NE

R U

NIT

HD

MI-

A

UD

IO(L

)-IN

HD

MI-

A

UD

IO(R

)-IN

AU

DIO

(L)

-OU

T

AU

DIO

(R)

-OU

T

AC

601

AC

CO

RD

PO

WE

R S

UP

PLY

CB

A

DIG

ITA

L M

AIN

CB

A U

NIT

HD

MI-

CO

NN

EC

TO

R-1

HD

MI-

CO

NN

EC

TO

R-2

LC

D M

OD

UL

EA

SS

EM

BLY

CL8

011

CN

801

2S

P(L

)-S

P(L

)+

CL8

021

CN

802

2S

P(R

)-S

P(R

)+

SP

801

SP

EA

KE

RL-

CH

SP

802

SP

EA

KE

RR

-CH

CO

MP

ON

EN

T-Y

-IN

CO

MP

ON

EN

T-P

b-IN

CO

MP

ON

EN

T-P

r-IN

CO

MP

ON

EN

T-

AU

DIO

(L)-

IN

CO

MP

ON

EN

T-

AU

DIO

(R)-

IN

VID

EO

-IN

AU

DIO

(L)

-IN

AU

DIO

(R)

-IN

S-V

IDE

O

-IN

CN

602

CN

201

CN

1900

CN

1001

22

HO

T-G

ND

11

AC

L

151

GN

D14

2IN

V+

16V

133

GN

D12

4B

ACK

LIG

HT-

AD

J11

5B

AC

KLI

GH

T-S

W10

6P

RO

TE

CT

39

7G

ND

88

LCD

+16

V7

9LC

D+

16V

610

VG

H5

11G

ND

412

P-O

N+

3.3V

313

LCD

-8V

214

VC

OM

115

GN

D

BA

CK

LIG

HT

CN

1050

21

BA

CK

LIG

HT

CN

1100

21

BA

CK

LIG

HT

CN

1150

21

BA

CK

LIG

HT

CN

1200

21

DIG

ITA

L A

UD

IO-O

UT

(C

OA

XIA

L)

JAC

K C

BA

IR S

EN

SO

R C

BA

FU

NC

TIO

N C

BA

CL7

01A

CL7

01C

L701

B1

1S

-VID

EO

-Y-I

N

33

S-V

IDE

O-C

-IN

22

S-V

IDE

O-S

W

44

GN

D5

5V

IDE

O-I

N

77

AU

DIO

(L)-

IN6

6G

ND

88

GN

D9

9A

UD

IO(R

)-IN

CL1

01

CL1

03

CN

101

11

GN

D

33

AL+

3.3V

22

RE

MO

TE

44

LED

15

5P

-ON

-H1

66

KE

Y-IN

17

7K

EY-

IN2

88

DV

D-L

ED

44

KE

Y-IN

2

CL1

01B

CL1

03B

CL1

03C

33

KE

Y-IN

12

2G

ND

11

AL+

3.3V

CN

1003 11

GN

D10

VC

OM

9G

ND

8LC

D-6

.8V

7P

-ON

+3.

3V6

P-O

N+

3.3V

5G

ND

4V

GH

3LC

D+

16V

2LC

D+

16V

1G

ND

LED

-CO

NT

2D

VD

-DIS

C-O

UT

3

EV

+1.

2V5

EV

+3.

3V6

EV

+3.

3V7

EV

+3.

3V8

DV

D-O

N+

3.3V

9D

VD

-ON

+5V

10E

V+

9V11

EV

+9V

12G

ND

13G

ND

14G

ND

15G

ND

16G

ND

17G

ND

18G

ND

19P

WR

CO

N(N

U)

20D

VD

-SC

LK21

DV

D-C

S22

DV

D-D

ISC

-IN

23

CN

901

EV

+1.

2V4

AL+

3.3V

1

DV

D-S

DAT

A24

DV

D-R

EM

OT

E25

DV

D-P

-ON

26

TO

D

VD

MA

INC

BA

UN

ITC

N40

1

TO

WIR

ING

2/2

DIA

GR

AM

GN

D7

GN

D6

DV

D-Y

5G

ND

4D

VD

-Pb

3G

ND

2D

VD

-Pr

1C

N90

2

DV

D-A

UD

IO(R

)11

GN

D8

DV

D-A

UD

IO(L

)9

DVD-

AUDI

O-M

UTE

10

GN

D12

DV

D-S

PD

IF13

TO

DV

D M

AIN

C

BA

UN

ITC

N60

1

CN

3002

CN

301

2319 2115 17 222018161410 126 8 13119751 3 4

1 53 972 4 6 8 10 1412 181611 13 15 17 19 232120

2P

-ON

-H2

AU

DIO

(L)-

OU

TG

ND

AU

DIO

(R)-

OU

TP

RO

TE

CT

3A

MP

(L)-

OU

TG

ND

AM

P(R

)-O

UT

P-O

N-H

1P

-ON

+3V

PR

OT

EC

T1

GN

DP

-ON

+5V

P-O

N+

5VP

RO

TE

CT

2P

-ON

+7V

GN

DG

ND

P-O

N+

3.3V

P-O

N+

3.3V

AL+

3.3V

AL+

3.3V

GN

D22

2424

OE

225

25R

EM

OT

E26

26B

ACK

LIG

HT-

SW

2727

LED

128

28B

ACK

LIG

HT-

AD

J29

29V

CO

M-P

WM

CN

3006

C

N30

2

2319 2115 17 222018161410 126 8 13119751 3 4

1 53 972 4 6 8 10 1412 181611 13 15 17 19 232120

2G

ND

SP

DIF

GN

DV

IDE

O-I

NS

-VID

EO

-SW

S-V

IDE

O-C

-IN

GN

DS

-VID

EO

-Y-I

NG

ND

INP

UT

1A

UD

IO(R

)IN

PU

T0

AU

DIO

(L)

GN

DC

OM

-VID

EO-Y

-ING

ND

COM

-VID

EO-P

b-IN

GN

DCO

M-V

IDEO

-Pr-I

NA

UD

IO-M

UT

ES

DA

SC

LR

ES

ET

22

2424

IF-A

GC

2525

GN

D26

26D

IF-O

UT

127

27G

ND

2828

DIF

-OU

T2

2929

KE

Y-IN

1

CN

303

CN

3003

2319 2115 17 222018161410 126 8 13119751 3 4

1 53 972 4 6 8 10 1412 181611 13 15 17 19 232120

2G

ND

KE

Y-IN

2D

VD

-LE

DP

-ON

-H3(

NU

)D

VD

-MA

IN-P

WR

DV

D-P

-ON

DV

D-R

EM

OT

ED

VD

-SD

ATA

DV

D-D

ISC

-IN

GN

DD

VD

-CS

GN

DD

VD

-SC

LKG

ND

DV

D-D

ISC

-OU

TLE

D-C

ON

TG

ND

DV

D-P

rG

ND

DV

D-P

bG

ND

DV

D-Y

GN

D22

2424

DV

D-A

UD

IO(L

)25

25DV

D-AU

DIO

-MUT

E26

26D

VD

-AU

DIO

(R)

2727

GN

D28

28D

VD

-SP

DIF

2929

GN

D

US

B J

AC

K

CL3

902

24G

ND

23LL

V0(

+)

22LL

V0(

-)21

LLV

1(+

)20

LLV

1(-)

19LL

N2(

+)

18LL

V2(

-)17

GN

D16

LLV

CLK

(+)

15LL

VC

LK(-

)14

GN

D13

LLV

3(+

)12

LLV

3(-)

11LL

V4(

+)

10LL

V4(

-)9

LLV

5(+

)8

LLV

5(-)

7G

ND

6T

P5

PO

L4

CP

V3

OE

12

XA

O1

ST

VC

N30

05

WIRING DIAGRAMWiring 1/2 Diagram

FL11.11WI2

CN

201

CN

301

LOA

D-D

ISC

LED-CONT2DVD-DISC-OUT3

EV+1.2V5EV+3.3V6EV+3.3V7EV+3.3V8DVD-ON+3.3V9DVD-ON+5V10EV+9V11EV+9V12GND13GND14GND15GND16GND17GND18GND19PWRCON(NU)20DVD-SCLK21DVD-CS22DVD-DISC-IN23

CN

401

EV+1.2V4

FS

TS

DE

TEC

TOR

79

112

36

5

M

SP

IND

LEM

OT

OR

M

SLE

DM

OT

OR

4

DV

D M

AIN

CB

A U

NIT

DR

IVE

CB

A

DV

D M

EC

HA

NIS

M

PIC

KU

PLOAD-DISC 6

SL(+) 5SL(-) 4GND 3SP(-) 2SP(+) 1

FS(-) 3TS(-) 4

GND(CD-PD) 5GND(DVD-PD) 6

PD-MONI 7DVD-LD 8

TS(+) 1FS(+) 2

GND 11NU 12

VREF 13NU 14

B 15C 16

GND(LD) 9CD-LD 10

A 17D 18

CD/DVD 19DVD-ON+5V 20

GND10GND9DVD-Y8

CN

601

DVD-AUDIO(R)14

GND11

DVD-Pb6GND5DVD-Pr4

GND7

DVD-AUDIO(L)12DVD-AUDIO-MUTE13

GND15DVD-SPDIF16

DIS

C-I

N

CN

5001

DIS

C-O

UT

LED-POWER 11DVD-DISC-OUT 22

GND 44DVD-DISC-IN 33

SE

NS

OR

CB

A

CN

801

CN

5001

is s

olde

red

dire

ctly

to th

e P

CB

.

AL+3.3V1

DVD-SDATA24DVD-REMOTE25DVD-P-ON26

TO

WIR

ING

1/2

DIA

GR

AM

TO

PO

WE

R S

UP

PLY

CB

A C

N90

1T

O P

OW

ER

SU

PP

LY C

BA

CN

902

(CL9

01)

(CL9

02)

Wiring 2/2 Diagram

13-2

14-1 TVDVDN_TI

SYSTEM CONTROL TIMING CHARTS

Disc IN(TL221)

Sled Drive(TP303)

Disc Drive(TP301)

Focus Drive(TP304)

Tracking Drive(TP302)

0V

3.3V

0V

1.65V

0V

0V

0V

1.65V

1.65V

1.65V

Disc In

Disc Rotation

PlayDisc Stop

Disc Out

Disc In ~ Play/Play ~ Disc Out

15-1 FL11.11LE

LEAD IDENTIFICATIONS

1: GND2: Vout3: Vin

1 2 3

E C BE C B G D S B C E

14 8

71

58 7

1 2 3

6

4

1

2

4

3

1: A2: K3: E4: C

8 5

41

16 9

81

44

221

23

1 2 3

1: ADJ

2: OUTPUT

3: INPUT

2SK2417(FT)TK5A50DTK8A50D

2SC4881F

LD1117VTL3472CDR

Note:A: AnodeK: CathodeE: EmitterC: CollectorB: BaseR: ReferenceS: SourceG: GateD: Drain

TC4052BF(ELNF)TL494CDR

BA10324AF-E2

BD5426EFS-E2 KIA1117API00

LTV-817MCF NJM4558M(TE1)

KTA1267-GR-AT/P 2SA950-O(TE2 F T)2SC2120-(O,Y)(TE2 F T)2SD400(E)KTC3198-Y-AT/PKTC3200-GR-AT/P

16-1 FL11.11-A_CEX

EXPLODED VIEWS

Cabinet [LD320SS2, 32MD301B/F7]

A1

B30

A10A5

L1

L1

L1

L16

L16

L8

L8

L2 L8

L10

See Electrical Parts List for parts with this mark.

Digital Main CBA Unit

Inverter CBA

AC601

B9

L6

L8

IR Sensor CBA

Function CBA

CL802

CL801

SP801

SP802

Power Supply CBA

B15

A8

A2

A13

Stand Assembly

L8

Jack CBA

L6

B27

L2

L7L7

L1

L1

L9

L3

B14

B13

B13

B11

B10

S5

L8

L2

L2

L2

A6

LCD1CL3902

CL1003

CL201

B1

L8

L8

B4 L2

B31

L2

L2

B15

B8 B19

L2

L1

L8

L16

CL101CL103

B15

B15

A12

A11

B5

B19

L3

L3

DVD Main CBA Unit

CL9021B1

CL901

CL3701

B44

CL3702CL4001

CL701

A14

B19

S5

A24

A42

16-2 FL11.11-A_CEX

Cabinet [32MD311B/F7]

A1

B30

A10

L1

L1

L1

L16

L16

L8

L8

L10

See Electrical Parts List for parts with this mark.

Digital Main CBA Unit

Inverter CBA

AC601

L6

L8

CL802

Power Supply CBA

SP801

A13

Stand Assembly

L8

Jack CBA

L6

B27

L2

L7L7

L1

L1

L9

L3

B14

B13

B13

B11

S5

L8

L2

L2

L2

A6

LCD1CL3902

CL1003

CL201

B1

L8

L8

B4 L2

B31

L1

L8

L16

Function CBA

IR Sensor CBA

CL103CL101

CL801

A11

B5

L3

L3

DVD Main CBA Unit

1B1

CL901

CL3701

B44

CL3702CL4001

CL701

A14

B19

S5

A24B15

B15

B15

B15

B19

B19

B55

B8

B9

A4

A3

A8

L2

L2

L2

L2

A12

A42

L8

B10

CL902

16-3 FL11.11PEX

Packing

S1

S4

S3

S1

Tape

Packing Tape

Packing Tape

Fixlon Tape

S2

X10

S3

S2

S9

S6 S5

L9

Some Ref. Numbers are not in sequence.

X1

X2X6

S5

Stand Assembly

X4

X3

FRONTFRONT

20110111 17-1 A1DF2CA

PARTS LIST [LD320SS2 (Serial No.: DS1)]

Mechanical Parts

PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.

NOTE: Parts that are not assigned part numbers (---------) are not available.

Ref. No. Description Part No.

STAND ASSEMBLY A9DF1UH 1ESA25567

A1 FRONT CABINET A94F1UH 1EM023485A

A2 CONTROL PLATE A94F0UH 1EM325777

A5 DECORATION PLATE A1DF2UH 1EM126153

A6 REAR CABINET A9DF0UH 1EM025345

A8 AC CORD HOLDER A94F0UH 1EM325557

A10# RATING LABEL A1DF2UH ----------

A11 JACK LABEL A9DF0UH 1EM431077

A12 POP LABEL A1DF2UH ----------

A13 JACK HOLDER A94F0UH 1EM123173

A14 CAUTION LABEL A1DF2UH ----------

A24 ENERGY STAR LABEL ----------

A42 ENERGY GUIDE LABEL ----------

1B1 DVD MECHA SLOT E7 N7XT3KVM N7XT3KVM

B1 SHIELD BOX A17F4UH 1EM225624

B4 STAND HOLDER 32W A94F0UH 1EM222763

B5 WALL MOUNT BRACKET A84N0UH 1EM323797

B8 SPEAKER HOLDER (L) A94F0UH 1EM123233

B9 SPEAKER HOLDER (R) A94F0UH 1EM123234

B10 DVD HOLDER 32W A94F0UH 1EM023408

B15 CLOTH(10X180XT0.5) L0336JG 0EM408827

B19 CLOTH(15X110XT 0.5) L0110UA 0EM408385

B27 GASKET A8AF0UH 1EM425861

B30 LASER CAUTION LABEL A94F0UH ----------

B31 FELT A94F0UH 1EM428797

B44 THERMAL SHEET TMS-14-20 12X12 XK10000X4011

CL201 WIRE ASSEMBLY 15PIN FFC 15PIN 140MM WX1A94F0-104

CL801 WIRE ASSEMBLY 2PIN 2PIN 310MM RED BLACK

WX1A94F0-202

CL802 WIRE ASSEMBLY 2PIN 2PIN 100MM RED BLACK

WX1A94F0-203






CL3902 WIRE ASSEMBLY 24PIN FFC 24PIN 117.5MM WX1A91F6-102


L1 SCREW P-TIGHT M4X14 BIND HEAD+BLK GBHP4140

L2 SCREW P-TIGHT 3X10 BIND HEAD+ GBHP3100

L6 SCREW S-TIGHT M3X8 BIND HEAD+ GBHS3080

L7 DOUBLE SEMS SCREW M4X10 + BLK FPH34100

L8 ASSEMBLED SCREW ( D9 M3X6 ) A71F0UH 1EM424392B

L9 STAND SCREW KIT A94F0UH 1ESA19508

L10 SCREW P-TIGHT 3X12 WASHER HEAD+ GCJP3120

L16 SCREW TAP TIGHT M3X10 BIND HEAD+BLK NI

GBHS3100

LCD1 LCD MODULE CMO 6BIT A GRADE UJ32MXF

SP801 SPEAKER MAGNETIC S0412F06A DSD0809XQ006

SP802 SPEAKER MAGNETIC S0412F06A DSD0809XQ006

PACKINGS1 CARTON A1DF2UH 1EM434688

S2 STYROFOAM TOP A94F0UH 1EM023410

S3 STYROFOAM BOTTOM A94F0UH 1EM023411

S4 SET BAG (900X850) A8AFFUH 1EM324904A

S5 SERIAL NO. LABEL A01PBUH ----------

S6 STAND BAG A94F0UH 1EM428757

S9 STAND HOLD PAD A94F1UH 1EM023746

ACCESSORIESX1 BAG POLYETHYLENE 235X365XT0.03 0EM408420A

X2# OWNERS MANUAL A1DF2UH 1EMN27599

X3 REMOTE CONTROL NF033UD NF033UD

X4 DRY BATTERY(SUNRISE) R6SSE/2S XB0M451MS002

X6 QUICK START GUIDE A1DF2UH 1EMN27600

X10 REGISTRATION CARD (SYLVANIA) A017DUH 1EMN27080


20110314 17-2 A1DF2EL

Electrical Parts


NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.


DVD MAIN CBA UNIT

MPW CBA

POWER SUPPLY CBA

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%


DIGITAL MAIN CBA UNIT A1DF2MMA-001


DVD MAIN CBA UNIT N7ETFKUP


MPW CBAConsists of the following:

A1DF2MP1-001

POWER SUPPLY CBAJACK CBA

--------------------


POWER SUPPLY CBAConsists of the following:

----------

CAPACITORSC201 CHIP CERAMIC CAP.(1608) F Z 0.1µF/25V CHD1EZ30F104

C202 CHIP CERAMIC CAP.(1608) F Z 0.1µF/25V CHD1EZ30F104


C204 ELECTROLYTIC CAP. 2.2µF/50V M CE1JMASDL2R2

C207 CHIP CERAMIC CAP.(1608) B K 0.1µF/16V CHD1CK30B104

C210 ELECTROLYTIC CAP. 22µF/50V M CE1JMASDL220

C216 CHIP CERAMIC CAP.(1608) CH J 1000pF/50V CHD1JJ3CH102


C218 CHIP CERAMIC CAP.(1608) B K 1µF/25V CHD1EK30B105

C219 ELECTROLYTIC CAP. 47µF/25V M CE1EMASDL470

C221 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103





C303 ELECTROLYTIC CAP. 330µF/10V M CE1AMASDL331

C305 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104

C306 ELECTROLYTIC CAP. 1µF/50V M CE1JMASDL1R0





C601# CAP METALIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004

C602# CAP METALIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004

C605 CAP ELECTROLYTIC 470µF/200V M CA2D471DYG07

C609 POLYESTER FILM CAP. (PB FREE) 0.047µF/100V J

CA2A473DT018

C611 CERAMIC CAP. 470pF/2KV CA3D471PAN04


CA2A683DT018


CA2A152DT018

C631 ELECTROLYTIC CAP. 1000µF/25V M CE1EMZNDL102


C633 CAP ALUMINUM ELECTOLYTIC 2200µF/6.3V M

CE0KMZNDL222


C637 CERAMIC CAP. 2200pF/1KV CCD3AKA0R222


C639 ELECTROLYTIC CAP. 1000µF/35V M CE1GMZADL102

C642 ELECTROLYTIC CAP. 0.47µF/50V M CE1JMASDLR47

C644 ELECTROLYTIC CAP 3300µF/16V M CE1CMZNDL332

C645 CAP ALUMINUM ELECTOLYTIC 2200µF/6.3V M

CE0KMZNDL222


CA2A222DT018

C647 ELECTROLYTIC CAP. 1µF/50V M CE1JMASDL1R0


C652 ELECTROLYTIC CAP. 1000µF/6.3V M CE0KMASDL102



C656 ELECTROLYTIC CAP. 100µF/16V M CE1CMASDL101







C691# SAFTY CAP. 1000pF/250V KX CA2E102MR101


C723 CHIP CERAMIC CAP.(1608) B K 2.2µF/10V CHD1AK30B225


C731 CHIP CERAMIC CAP. CH J 39pF/50V CHD1JJ3CH390









C801 CHIP CERAMIC CAP. F Z 1µF/10V CHD1AZ30F105

C802 CHIP CERAMIC CAP.(1608) B K 0.1µF/25V CHD1EK30B104









20110314 17-3 A1DF2EL











C823 ELECTROLYTIC CAP. 1000µF/25V M CE1EMZNDL102











C835 CHIP CERAMIC CAP.(1608) B K 2700pF/50V CHD1JK30B272


























C906 CHIP CERAMIC CAP. B K 2200pF/50V CHD1JK30B222

C907 CHIP CERAMIC CAP. B K 2200pF/50V CHD1JK30B222













CONNECTORS


CN101 PH CONNECTOR TOP 8P B8B-PH-K-S (LF)(SN)

J3PHC08JG029

CN201 FFC CONNECTOR 15P IMSA-9615S-15A-PP-A JC96J15ER007

CN301 FFC CONNECTOR IMSA-9615S-29A-PP-A JC96J29ER007



CN602 WIRE ASSEMBLY 2PIN 2PIN 145MM RED BLACK

WX1A94F0-201


J3PHC02JG029


J3PHC02JG029



DIODESD202 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133

D203 SWITCHING DIODE 1SS133(T-77) QDTZ001SS133

D204 IC SHUNT REGULATOR KIA431-AT/P NSZBA0TJY036

D205 DIODE ZENER 24BSC-T26 NDTC024BST26




D209 DIODE ZENER 39BSB-T26 NDTB039BST26

D210 DIODE ZENER 6V2BSB-T26 NDTB6R2BST26



















D601# DIODE GENERAL PURPOSE 1N5406-BU NDLZ1N5406BU




D606# DIODE ZENER 27BSB-T26 NDTB027BST26


D609# SWITCHING DIODE 1SS133(T-77) QDTZ001SS133



D620 DIODE ZENER 1ZB220-YBB NDWZ01ZB220Y

D631 DIODE FR154 NDLZ000FR154

D632 DIODE FR104-B NDLZ000FR104

D633 DIODE FAST RECOVERY FR151-B/P NDWZ0FR151BP

D634 SCHOTTKY BARRIER DIODE SB240-B/P NDWZ000SB240


D637 SCHOTTKY BARRIER DIODE SB160 NDWZ000SB160


D639 DIODE ZENER 1ZB43BB NDWZ0001ZB43






20110314 17-4 A1DF2EL

D645 SHUNT REGULATOR KIA431B-AT/P NSZBA0TJY038

D646 DIODE SCHOTTKY SB360BH NDWZ000SB360

D647 SCHOTTKY BARRIER DIODE SB240-B/P NDWZ000SB240





D655 RECTIFIER DIODE 1N4005 NDQZ001N4005



D659 DIODE ZENER 6V8BSA-T26 NDTA6R8BST26





D665 WIRE COPPER 6111-06003-0120 XZ40C0SHG002



















ICSIC201 IC TL3472CDR NSZBA0TTY115

IC601# PHOTO COUPLER LTV817MCF NPECLTV817MF

IC631 IC LD1117V NSZBA0SSS046

IC771 IC SWITCHING TC4052BF(ELNF) QSZBA0TTS162

IC801 IC D-AMP BD5426EFS-E2 QSZBA0TRM137

IC871 IC OP AMP NJM4558M(TE1)-#ZZZB QSZBA0TJR089

IC901 IC REGULATOR KIA1117API00/TO-220 NSCA0S0JY009

IC951 IC OP AMP NJM4558M(TE1)-#ZZZB QSZBA0TJR089

COILSL302 CHIP INDUCTOR LK1608R22K-T LLACKB3TUR22

L303 CHIP INDUCTOR LK1608R22K-T LLACKB3TUR22

L601# COIL LINE FILTER ST0807ET28-009 10MH LLEG0Z0Y2029

L602# COIL LINE FILTER ST0807ET28-009 10MH LLEG0Z0Y2029

L801 RADIAL LEAD INDUCTORS 33µF LLARKGQTU330




L871 WIRE COPPER 6111-06003-0120 XZ40C0SHG002



TRANSISTORSQ171 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P

Q172 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P

Q201 TRANSISTOR KTA1267-GR-AT/P NQS1KTA1267P








Q209 TRANSISTOR 2SD400(E) QQUE002SD400






Q501 TRANSISTOR 2SC2120-Y(TE2 F T) QQSY2SC2120F

Q601# FET MOS TK5A50D(FUNAI QEWZTK5A50DQ

Q602# TRANSISTOR 2SC2120-O(TE2 F T) QQS02SC2120F




Q636 TRANSISTOR 2SA950-O (TE2 F T) QQS002SA950F

Q637 NPN TRANSISTOR POWER 2SC4881F HFE MAX320

QQWZ2SC4881F




















RESISTORSR171 RES CHIP 1608 1/10W J 22k Ω RRJ223RYL002

R172 RES CHIP 1608 1/10W J 22k Ω RRJ223RYL002

R175 RES CARBON FILM T 1/4W J 22k Ω RCX4223T1001



R204 RES CARBON FILM T 1/4W J 560 Ω RCX4561T1001



R208 RES CHIP 1608 1/10W J 1 Ω RRJ1R0RYL002





R217 RES CHIP 1608 1/10W J 1.5k Ω RRJ152RYL002




R223 RES CARBON FILM T 1/4W J 3.3k Ω RCX4332T1001




R227 METAL OXIDE FILM RES. 1W J 2.7 Ω RN012R7ZU001





20110314 17-5 A1DF2EL

R232 RES CHIP 1608 1/10W F 11.0k Ω RTW1102HH008

R233 RES CHIP 1608 1/10W F 750 Ω RTW7500HH008













R302 RES CHIP 1608 1/10W 0 Ω RRZ000RYL002




R308 RES CHIP 1608 1/10W J 82 Ω RRJ820RYL002














R601# RES. CARBON FILM J 1/2W J 560k Ω RCX2564T1003

R602# CEMENT RESISTOR 5W J 2.2 Ω H 10MM RW052R2PAK10







R614# METAL OXIDE FILM RES. 2W J 0.39 Ω RN02R39ZU001



R617# CEMENT RESISTOR 5W J 2.2 Ω H 10MM RW052R2PAK10


R636 RES. CARBON FILM J 1/2W J 2.7 Ω RCX22R7T1003




R641 RES CHIP 1608 1/10W D 1.10k Ω RTW1101HH007








R651 RES CHIP 1608 1/10W J 1 Ω RRJ1R0RYL002


R653 WIRE COPPER 6111-06003-0120 XZ40C0SHG002






R661 RES. CARBON FILM J 1/2W J 390 Ω RCX2391T1003





R666 RES CARBON FILM T 1/4W J 1.0 Ω RCX41R0T1001


























































20110314 17-6 A1DF2EL

JACK CBA









































R910 RES CHIP.(1608) 1/10W J 0.30 Ω RRXAR30HH007

R911 RES CHIP.(1608) 1/10W J 0.30 Ω RRXAR30HH007









R920 RES CARBON FILM T 1/4W G 3.3k Ω RCX4332T1002

R921 RES CARBON FILM T 1/4W G 10k Ω RCX4103T1002




















MISCELLANEOUSAC601# AC CORD W/O A GND WIRE UL/CSA 1770 NO

BLACKWAC0172LW022

B11 POW HEAT SINK A7120UH 1EM423993

BC301 WIRE COPPER 6111-06003-0120 XZ40C0SHG002

BC601 BEADS INDUCTOR FBR07HA121SB-00 LLBF00STU030







CL701 WIRE ASSEMBLY 9P 9PIN/170MM WX1A94F0-002

F601# FUSE STC4A125V U/CT PAGE20CW3402

FH601 FUSE HOLDER MSF-015 LF (B110) XH01Z00LY002

FH602 FUSE HOLDER MSF-015 LF (B110) XH01Z00LY002

JK721 JACK RCA PCB S WHITE 01/RCA-101H(WH) JXRJ010YUQ02

JK722 JACK RCA PCB S RED 01/RCA-101H(RD) JXRJ010YUQ01

JK731 JACK RCA PCB S GREEN 01/RCA-101H(GN) JXRJ010YUQ03

JK732 JACK RCA PCB S BLUE 01/RCA-101H(BL) JXRJ010YUQ04



JK742 JACK SW RCA PCB S RED RCA-102H(RD) JYRJ010YUQ03

JK841 JACK RCA PCB S ORANGE 01/RCA-101H(OR) JXRJ010YUQ06



JS101 WIRE COPPER 6111-06003-0120 XZ40C0SHG002






L3 SCREW B-TIGHT D3X8 BIND HEAD+ GBJB3080

SA601# SURGE ABSORBER 470V+-10PER NVQZ10D471KB

T601# TRANS POWER BCK-28-9932 LTT2PC0XB043

TM601 EYELET TYPE D-1 0VM406868

TM602 EYELET TYPE D-1 0VM406868

TU301 TUNER UNIT ATSC TDAU4-D05A UTNATS0AL002


JACK CBAConsists of the following:

----------

CAPACITORSC751 CHIP CERAMIC CAP.(1608) CH J 100pF/50V CHD1JJ3CH101



C754 RES CHIP 1608 1/10W 0 Ω RRZ000RYL002





RESISTORSR751 RES CHIP 1608 1/10W J 75 Ω RRJ750RYL002



20110314 17-7 A1DF2EL

INVERTER ASSEMBLY

INVERTER CBA









MISCELLANEOUSJK751 JACK SW DIN PCB L DIN-435C(777D) JYEL040YUQ03

JK752 JACK RCA PCB L RCA-101S(1)-03 JXRL010YUQ12

JK753 JACK RCA PCB L RCA-101S(1)-04 JXRL010YUQ13

JK754 JACK SW RCA PCB L RCA-102F(RD) JYRL010YUQ05


INVERTER ASSEMBLYConsists of the following:

A1DF2M1V-001

INVERTER CBA

------------------------------------------------------------------FUNCTION CBAIR SENSOR CBA

A1DF2M1V-001-IV

--------------------------------A1DF2M1V-001-FNIR


INVERTER CBAConsists of the following:

----------

CAPACITORSC1001 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104











CA2A392DT018




C1052 ELECTROLYTIC CAP 100µF/100V CE2AMZNDL101



C1061 CAP CERAMIC HV 15pF/6.3KV/SL/J CCA1500MR001

C1062 CAP CERAMIC (AX) 1500pF/50V/B/K CA1J152TU061













































C1801 ELECTROLYTIC CAP. 22µF/35V M CE1GMASDL220



C1910 CAP ELECTROLYTIC 270µF/200V CEA271DYG005


C1931# POLYESTER FILM CAP. (PB FREE) 0.001µF/100V J

CA2A102DT018


CA2A273DT018


CA2A104DT018


CA2A473DT018

C1981 CHIP CERAMIC CAP. F Z 0.01µF/50V CHD1JZ30F103

C1982 ELECTROLYTIC CAP. 0.47µF/50V M CE1JMASDLR47

C1990 CAP CERAMIC HV 820pF/1KV B K CA3A821TE006

C1992# ELECTROLYTIC CAP 470µF/100V CE2AMZNDL471

CONNECTORSCN1001 FFC CONNECTOR 15P IMSA-9615S-15A-PP-A JC96J15ER007


CN1050# CONNECTOR/JACK 1747386-1 JB17J02AP002




CN1900# CONNECTOR B2P3-VH(LF)(SN) J3VH020JG001

DIODESD1000 DIODE ZENER 15BSB-T26 NDTB015BST26










20110314 17-8 A1DF2EL











































































D1971 DIODE ZENER HZS33NB2TE-EQ QDTBHZS33NB2



D1990 DIODE FAST RECOVERY 31DF4-FC QDWZ031DF4FC

D1994 DIODE ZENER 1ZB100BB NDWZ001ZB100

ICSIC1000 IC PULSE-WIDTH-MODULATION CONT

TL494CDRNSCA0T0TY006

IC1700 IC BA10324AF-E2 QSZBA0TRM032



TRANSISTORSQ1001 TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P












Q1500 FET MOS 2SK2417(FT) QFWZSK2417FT




Q1550 FET MOS 2SK2417(FT) QFWZSK2417FT












Q1930# MOS FET TK8A50D QFWZTK8A50DQ

Q1931# TRANSISTOR KTC3198-Y-AT/P NQSYKTC3198P

Q1932# TRANSISTOR 2SC2120-Y(TE2 F T) QQSY2SC2120F

Q1970 NPN TRANSISTOR KTC3200-GR-AT/P NQSGKTC3200P



RESISTORSR1001 RES CHIP 1608 1/10W F 22.0k Ω RTW2202HH008







20110314 17-9 A1DF2EL

















R1024 RES CHIP 1608 1/10W F 100k Ω RTW1003HH008


























R1072 RES CHIP 1608 1/10W J 1M Ω RRJ105RYL002






















































































20110314 17-10 A1DF2EL

FUNCTION CBA

IR SENSOR CBA

R1937# METAL OXIDE FILM RES. 2W J 0.33 Ω RN02R33ZU001





R1943 RES CARBON FILM 1/4W J 330k Ω RCX4334FS002

























MISCELLANEOUSB13 HEAT SINK PNA A94F0UH 1EM428121

B14 HEAT SINK PNB ASSEMBLY A94F0UH 1EM428123

BC1301 WIRE COPPER 6111-06003-0120 XZ40C0SHG002

BC1500 COIL BEADS CORE FBR07VA850TB-00 LLBF00ZTU020






L3 SCREW B-TIGHT D3X8 BIND HEAD+ GBJB3080

T1050# TRANS INVERTER HVT-153 LTZ3PZ0XB009




T1950# TRANS POWER BCK-35-0607 LTT3PC0XB048


FUNCTION CBAConsists of the following:

----------

CAPACITORSC108 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062

C151 CAP CERAMIC (AX) 0.1µF/50V/F/Z CA1J104TU062

RESISTORSR108 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001












SWITCHESSW101A TACT SWITCH SKHHLMA010 SST0101AL049

SW103A TACT SWITCH SKHHLMA010 SST0101AL049





SW151 TACT SWITCH SKHHLMA010 SST0101AL049




IR SENSOR CBAConsists of the following:

----------

CAPACITORSC113 ELECTROLYTIC CAP. 47µF/16V M H7 CE1CMAVSL470


DIODESD104 LED GREEN 333GT/E(FNA) NPWZ33GTEFNA

D105 LED L-53HT NP4Z000L53HT

D106 LED (YELLOW) LTL-307Y NPWZ0LTL307Y

RESISTORSR123 RES CARBON FILM T 1/4W J 220 Ω RCX4221T1001






MISCELLANEOUSCL101 WIRE ASSEMBLY 8P 8PIN/170MM WX1A01F0-001

CL103 WIRE ASSEMBLY 4P 4PIN/250MM WX1A94F0-003

RS102 SENSOR REMOTE RECEIVER KSM-712TH2E USESJRSKK044


2011/04/22 17-11 A1DF0CA.fm

PARTS LIST [32MD301B/F7 (Serial No.: DS1)]

Mechanical Parts


NOTE: Parts that are not assigned part numbers (---------) are not available.

Different parts from the original model LD320SS2 (Serial No. : DS1)


STAND ASSEMBLY A9DF0UH 1ESA26285

A1 FRONT CABINET A94F0UH 1EM023405

A5 DECORATION PLATE A1DF0UH 1EM126434

A10# RATING LABEL A1DF0UH ----------

L9 STAND SCREW KIT A1DA0UH 1ESA28845

S1 CARTON A1DF0UH 1EM435522

S9 STAND HOLD PAD A94F0UH 1EM023745

X2# OWNERS MANUAL A1DA0UH 1EMN28219

X3 REMOTE CONTROL NF801UD 192/ECNLC7D1/NF801UD

NF801UD

X4 DRY BATTERY R03/2S XB0M451T0006

X6 QUICK START GUIDE A1DF0UH 1EMN28221

X10 REGISTRATION CARD (MAGNAVOX) A17N0UH

1EMN27759

2011/04/22 17-12 A1DF0EL.fm

Electrical Parts


NOTES:

1. Parts that are not assigned part numbers (---------) are not available.

2. Tolerance of Capacitors and Resistors are noted with the following symbols.

Different parts from the original model LD320SS2 (Serial No. : DS1)

C.....±0.25% D.....±0.5% F.....±1%

G.....±2% J......±5% K.....±10%

M.....±20% N.....±30% Z.....+80/-20%



DVD MAIN CBA UNIT N7EX1KUP

32MD311B/F7(A1DF4UH)(Serial No.: DS1)

2011040732MD311B/F7(A1DF4UH)(Serial No.: DS1)

Different parts from the original model LD320SS2(DS1)Ref. No. Description Parts No.MECHANICAL PARTS

STAND ASSEMBLY A9DF0UH 1ESA26285A1 FRONT CABINET A1DF4UH 1EM028285A2 Not usedA3 FUNCTION KNOB A1DF1UH 1EM330937A4 LED LENS A1DF1UH 1EM330657A5 Not usedA10! RATING LABEL A1DF4UH ----------A24 ENERGY STAR LABEL A91F2UH ----------A42 ENERGY GUIDE LABEL A1DF4UH ----------B30 LASER CAUTION LABEL A1DN2UH ----------B55 SHIELD PLATE A1DF1UH 1EM330658L9 STAND SCREW KIT A1DA0UH 1ESA28845S1 CARTON A1DF4UH 1EM435925S2 STYROFOAM TOP A1DF1UH 1EM027806S3 STYROFOAM BOTTOM A1DF1UH 1EM027808S4 SET BAG A17F6UH 1EM330877S9 STAND HOLD PAD A94F0UH 1EM023745X1 POLYETHYLENE BAG HDPE 180X340XT0.03 1EM435579X2! OWNERS MANUAL A1DA0UH 1EMN28219AX3 REMOTE CONTROL NF801UD 192/ECNLC7D1/NF801UD NF801UDX4 DRY BATTERY R03/2S XB0M451T0006X6 QUICK START GUIDE A1DF0UH 1EMN28221X10 REGISTRATION CARD (MAGNAVOX) A17N0UH 1EMN27759

ELECTRICAL PARTS


DVD MAIN CBA UNIT N7EX1KUP

1 / 1 page

18-1 FL11.11REV

REVISION HISTORY

Chassis FL11.11• 2011-01-21 LD320SS2 (Serial No. : DS1) added

• 2011-03-18 32MD301B/F7 (Serial No. : DS1) added

• TBD 32MD311B/F7 (Serial No. : DS1) added

FL11.11COM

COMPARISON LIST OF MODEL NAME

Chassis FL11.11LD320SS2 (DS1) A1DF2UH

32MD301B/F7 (DS1) A1DF0UH

32MD311B/F7 (DS1) A1DF4UH

Date post:	01-Aug-2018
Category:	Documents
Upload:	vanquynh
View:	217 times
Download:	0 times

chassis FL11.11 SERVICE MANUAL - Encompass · Make sure to refer to the section describing your...

Documents