CHEMICAL - Ansell Catalogue · is based on the Six Sigma process ... Safety solution that analyses...

INDUSTRY SPECIFIC PROTECTION SOLUTIONS

CHEMICAL

WWW.ANSELL.EU

LOREM IPSUM

COMFORT, PERFORMANCE & PROTECTION COMBINED

2

LOREM IPSUM

KEEPING YOUR WORKFORCE SAFE

GLOBAL SALES AND SUPPLY CHAIN INFRASTRUCTURE CREATES A SIGNIFICANT COMPETITIVE ADVANTAGE

DEDICATED TO SAFETYPRODUCTS ENGINEERED BY ANSELL ARE TRUSTED TO DELIVER THE OPTIMUM BALANCE OF COMFORT, PERFORMANCE AND PROTECTION. FROM OUR ALPHATEC® TO HYFLEX® BRANDS, WE PROVIDE CUSTOMERS WITH TAILORED SOLUTIONS TO IMPROVE WORKER SAFETY AND PRODUCTIVITY.

• 14,000 EMPLOYEES• 52 FACILITIES• 120 EMPLOYEES DEDICATED TO

RESEARCH & DEVELOPMENT

NORTH AMERICA

LATIN AMERICAAND CARIBBEAN

EUROPE, THE MIDDLE EAST AND AFRICA

ASIA PACIFIC

MAP KEY

Corporate offices

Operating facilities

Manufacturing and distribution facilities

Research and development facilities

4

ANSELL AND THE CHEMICAL INDUSTRY

OUR QUALITY STANDARDS EXCEED SOME OF THE STRICTEST INDUSTRY AND GOVERNMENT REQUIREMENTS DESCRIBED IN MOST MANUFACTURING AND SAFETY REGULATIONS.

No single material can prevent exposure to all dangerous chemicals and they can happen in different ways; through splash or immersion. Selecting the right chemical protection requires an understanding of the work environment and regulations governing these chemicals. Each Ansell protective product reflects material choices, construction decisions and manufacturing details designed to improve the worker experience.

The requirements and hazards involved in the chemical industry call for three characteristics: comfort, performance and protection. Ansell’s new technologies are developed to increase protection and to address very important problems such as perspiration, grip and overall comfort – for a better day at work!

Workers also need mechanical protection from cuts, abrasions and punctures and emergency response clothing. Ansell offers a comprehensive range of gloves and clothing to cover worker needs across the chemical industry.

5

METHODOLOGY The overall Ansell Guardian® methodology is based on the Six Sigma process improvement concept and delivers best-practice recommendations with the most impact for a customer’s business.

The Ansell Guardian® strategy is a customer-centric methodology that employs a consistent approach to each operational area addressed.

Analyze: Ansell/customer team discusses business objectives and understands safety requirements..

Benchmark: Understand needs and establish current performance baseline to later quantify process improvements.

Improve: Development of an implementation plan for business improvement.

Measure: Quantify the success of the programme against baseline measurements and establish new performance benchmarks.

Expansion: Implementation of the plan throughout your organisation.

Commitment: We continue to monitor the success and performance of our recommendations and make adjustments as your business changes over time.

ANSELL GUARDIAN® IS A UNIQUE SUITE OF MANAGEMENT TOOLS HELPING BUSINESSES IMPROVE SAFETY AND PRODUCTIVITY WHILE REDUCING COSTS.Our proprietary service has been awarded with patent protection by the United States Patent & Trademark Office. Ansell Guardian® is an inherent component of our culture. It’s how we interact with our customers.

MAXIMISING SAFETY & PERFORMANCE

6

A GLOBAL LEADER IN SAFETY & BUSINESS PERFORMANCE SOLUTIONS

For more information on Ansell Guardian® go to: www.ansell.com/ansellguardian

SERVICESThe Ansell Guardian® portfolio of services hosts 5 major areas, including Product Guardian, Safety Guardian, Business Guardian, Chemical Guardian and Vending Guardian. The overall Ansell Guardian® methodology is based on the Six Sigma process improvement concept and delivers best-practice recommendations with the most impact for a customer’s business.

• 30 YEARS OF EXPERIENCE IMPLEMENTING BUSINESS IMPROVEMENTS • MORE THAN 8000 ANSELL GUARDIAN® ASSESSMENTS • UNIQUE PORTFOLIO OF MULTI-DISCIPLINARY SERVICES • FULL VERTICAL CAPABILITY• GLOBAL FOOTPRINT

Description:Product optimisation solution identifying the most appropriate and comfortable hand and arm protection.

Benefits:Lower cost of ownership

Description:Safety solution that analyses job requirements and provides recommendations based on best practices and analytical risk assessment procedures.

Benefits:Employee safety

Description:Business performance improvement and implemen-tation across 7 cost drivers that measure financial progress.

Benefits:Business performance

Description:Ansell Chemical Guardian evaluates resistance of glove materials with your chemicals to offer a personalized glove assessment with expected permeation times.

Benefits:Chemical glove recommendation

Description:Best-in-class portfolio that maximises profit from vending efficiencies improves worker compliance and offers better product performance.

Benefits:Lower total cost of ownership, increased safety, compliance and accessibility, improved productivity

7

ANSELL CHEMICAL GUARDIAN™ MATCHES GLOVE MATERIALS WITH THE CHEMICALS IN YOUR WORK ENVIRONMENT, OFFERING A PERSONALISED GLOVE ASSESSMENT THAT INCLUDES RECOMMENDED PERMEATION TIMES.

PROTECTING WORKERS FROM HARMFUL CHEMICALS

Barrier Material Butyl LLDPE Neoprene Neoprene Neoprene Nitrile Nitrile Nitrile Nitrile PVA

Product Type Unsupported Unsupported Supported Supported Disposable Supported Unsupported Unsupported Disposable Supported

Chem. Resistance High High High High Low High High High Low High

Product Name ChemTek™ Barrier® Scorpio® Scorpio® NeoTouch™ AlphaTec® Solvex® Solvex® TouchNTuff® PVA™

Product Style 38-514 02-100 08-352.35409-430. 922.924.

92825-101.201 58-530.535 37-675.676 37-900

92-500.600.605

/93-250.300.700

15-554

Thickness (mm) 0.35 0.062 N.A. N.A. 0.13 N.A. 0.38 0.425 0.12 N.A.

>480' >480' >480' >480' >480' >480' >480' >480' >480' >480'

<10' >480' <10' <10' <10' 23' 10-30' 10-30' <10' >480'

>480' >480' <10' <10' <10' 10-30' 10-30' 10-30' <10' >480'

>480' >480' >480' >480' >480' >480' >480' >480' >480' >480'

<10' >480' 60-120' 30-60' <5' 60-120' 60-120' 60-120' >480' >480'

>480' >480' >480' >480' >480' 30-60' 30-60' 30-60' >480' 240-480'

Type CAS Chemical Name %

sgl 100-21-0 Terephthalic acid 100

sgl 100-41-4 Ethylbenzene 100

sgl 107-66-4 dibutyl phosphate 100

sgl 108-31-6 Maleic anhydride 100

sgl 110-82-7 Cyclohexane 100

sgl 141-43-5 Ethanolamine 100

AN OPTIMAL SOLUTION FOR SELECTING THE RIGHT CHEMICAL GLOVE:

• Solution for both single and chemical mixes

• Assurance you are selecting the right chemical glove

• Estimated permeation times included

• Chemist available when needed to walk you through the recommendation

WORKER SAFETY & GLOBAL REACH:

• Comprehensive range of gloves and clothing to cover worker needs across the chemical industry

• Technology-based solutions to enhance worker comfort, performance and protection – for a better day at work

• Sales support throughout North America, Latin America, Europe and Asia

ANSELL CHEMICAL GUARDIAN™

8

Barrier Material Butyl LLDPE Neoprene Neoprene Neoprene Nitrile Nitrile Nitrile Nitrile PVA

Product Type Unsupported Unsupported Supported Supported Disposable Supported Unsupported Unsupported Disposable Supported

Chem. Resistance High High High High Low High High High Low High

Product Name ChemTek™ Barrier® Scorpio® Scorpio® NeoTouch™ AlphaTec® Solvex® Solvex® TouchNTuff® PVA™

Product Style 38-514 02-100 08-352.35409-430. 922.924.

92825-101.201 58-530.535 37-675.676 37-900

92-500.600.605

/93-250.300.700

15-554

Thickness (mm) 0.35 0.062 N.A. N.A. 0.13 N.A. 0.38 0.425 0.12 N.A.

>480' >480' >480' >480' >480' >480' >480' >480' >480' >480'

<10' >480' <10' <10' <10' 23' 10-30' 10-30' <10' >480'

>480' >480' <10' <10' <10' 10-30' 10-30' 10-30' <10' >480'

>480' >480' >480' >480' >480' >480' >480' >480' >480' >480'

<10' >480' 60-120' 30-60' <5' 60-120' 60-120' 60-120' >480' >480'

>480' >480' >480' >480' >480' 30-60' 30-60' 30-60' >480' 240-480'

Recommendations are based on extrapolations from laboratory test results and information regarding the composition of chemicals and may not adequately represent specific conditions of end use. Synergistic effects of mixing chemicals have not been accounted for. For these reasons, and because Ansell has no detailed knowledge of or control over the conditions of end use, any recommendation must be advisory only and Ansell fully disclaims any liability including warranties related to any statement contained herein.

PERMEATION BREAKTHROUGH TIMES ACCORDING TO EN374 (MINUTES)

0 1 2 3 4 5 6

< 10 10-30 30-60 60-120 120-240 240-480 >480

Not Recommended Splash Protection Medium Protection High Protection

Offers both disposable and chemical glove recommendation

Requires MSDS data to complete form

Matches glove materials with your chemicals

Easy to understand report Estimated permeation times included

9

Brand Category Positioning Benefits

Chemical

AlphaTec® gloves offer workers comfort and confidence in demanding chemical environments.

• Supported ranges• Unsupported ranges• Multi-duty selection• Wet/dry selection• Moisture management

Single Use

TouchnTuff® single-use gloves provide superior tactility and high resilience in wet and dry industrial, lab and controlled environments.

• Wide polymer selection• Diverse style variants• Multi-weight• Color choices

Single Use

Purpose-built to outperform the competition by providing superior protection, pushing the boundaries of disposable glove performance.

• Wide polymer selection• Diverse style variants• Multi-weight• Color choices

CHEMICAL PROTECTIONNo single material can prevent exposure to all dangerous chemicals and they can happen in different ways; through splash or immersion. Selecting the right chemical protection requires an understanding of the work environment and regulations governing these chemicals.

10

GUIDE TO ANSELL PROTECTION SOLUTIONS FOR THE CHEMICAL INDUSTRY

ANSELL OFFERS A COMPREHENSIVE RANGE OF CHEMICAL AND MECHANICAL GLOVES AS WELL AS BODY PROTECTION TO COVER WORKER NEEDS ACROSS THE CHEMICAL INDUSTRY.


Clothing

Trellchem® suits are designed to provide excellent durability for extended use in chemical response missions, with each suit providing protection against a variety of chemicals.

• Reusable• High chemical resistance• Abrasion resistant• Flame resistant• Anti-static• Radioactive resistance


Mechanical

The optimal balance of flexibility and performance. Advanced mechanical protection for managed risk environments.

• Abrasion resistant• Oil repellent• Cut resistant• Multi-purpose• Multi-duty• Ultralight

Mechanical

ActivArmr® Personal Protective Gear from Ansell is designed and engineered to offer you specialised armoured protection for unpredictable risk environments.

• Impact resistant• Vibration resistant• Flame resistant• All-conditions visibility• All-conditions thermal

MECHANICAL PROTECTIONWorkers in the chemical industry need mechanical protection from cuts, abrasion and punctures in daily operations. Ansell offers a comprehensive range of mechanical gloves and impact and fire protection to cover all worker needs across the chemical industry.

BODY PROTECTIONSelecting the right body protection requires understanding of the work environment and regulations governing these chemicals. Ansell offers a comprehensive range of chemical clothing to cover all worker needs across the chemical industry.

11

OVER 100 YEARS OF EXPERIENCE IN PRODUCT INNOVATION THAT IMPROVE WORKER EXPERIENCE. WORKER EXPERIENCE INNOVATION BY ANSELL FOCUSES ON THREE BENEFIT-BASED INNOVATION PLATFORMS – COMFORT, PERFORMANCE AND PROTECTION.

ZONZ™ Open Visual Stitching

Knitted Liner

This innovative knitting process uses varying stitch designs around stress areas. This enhances hand movement and stretch for maximum flexibility and dexterity and reduced hand fatigue.

COMFORT TECHNOLOGIESAnsell comfort technologies provide workers with an ultimately positive sensory wearing experience through glove fit.

PROTECTION TECHNOLOGIESAnsell protection technologies shield workers from exposures, injuries or damage caused by their environment, industrial materials and equipment.

This engineered yarn blends various fibers such as stainless steel, glass and nylon in a process that provides high cut protection with exceptional comfort and dexterity.

INTERCEPT™ Cut Resistant Yarn

Ansell Fiber Blend

Engineered Fiber

Synthetic Fiber

PERFORMANCE TECHNOLOGIESAnsell performance technologies enable workers to execute tasks more efficiently and effectively and with greater speed, agility and quality.

ANSELL GRIP™ Coating Treatment

Oily Surface

This coating treatment minimizes the force required to grip oily or wet tools or materials, reducing hand and arm fatigue and improving dexterity, safety and productivity.

WORKER EXPERIENCE INNOVATION BY ANSELL

12

Nitrile Compound Shell

Cotton Flocked Lining

AquaDri™ Open-Celled Foam

A patent-pending technology and flocked foam nitrile coating on the interior creates an open-celled foam structure that provides unrivaled moisture absorption and a cooler, drier, more comfortable fit.

This liquid impermeable coating prevents oil or lubricants from making even incidental contact with the wearer’s skin for improved hand health.

Knitted Liner

RIPEL™ Liquid Impermeable Nitrile Coating

PERFORMANCE TECHNOLOGIESAnsell performance technologies enable workers to execute tasks more efficiently and effectively and with greater speed, agility and quality. FORTIX™ Nitrile Foam Coating

Knitted Liner

This thin, strong and patent-pending breathable nitrile foam coating dramatically extends glove life and improves glove comfort in applications with abrasive handling exposure.

13

WAREHOUSING

APPLICATIONS:• Warehousing of raw materials,

intermediates and additives• Loading/unloading trucks & vehicles• Handling incoming goods –

cans, vessels, bulkpack• Packaging and/or storage

USER NEEDS:• Dexterity• Abrasion resistance• Chemical resistance• Liquid repellence• Dry/oil grip• Flexibility

CHEMICAL

AlphaTec® 58-330Medium Duty Nitrile/

AquaDri™

AlphaTec® 58-335Heavy Duty Nitrile/

AquaDri™

AlphaTec® 58-430 Medium Duty Nitrile/

Ansell Grip™

AlphaTec® 58-435 Heavy Duty Nitrile/

Ansell Grip™


Ansell Grip™


Ansell Grip™

AlphaTec® 58-128 Light Duty Nitrile/

Ansell Grip™

Solvex® 37-185 Heavy Duty/

Nitrile Unsupported

Solvex® 37-675Medium Duty/

Nitrile Unsupported

Solvex® 37-676 Medium Duty/

Nitrile Unsupported


Nitrile Unsupported

ChemTek™ 38-520 Medium Duty/Butyl Polymer

ChemTek™ 38-612 Heavy Duty/

Viton Butyl Polymer

ChemTek™ 38-628Heavy Duty/ Viton

Butyl Polymer

ChemTek™ 38-514 Medium Duty/ Butyl Polymer

MECHANICAL

HyFlex® 11-518 Light Duty/

Cut Protection

HyFlex® 11-926Light Duty/

Oil Repellent


Multi-purpose

HyFlex® 11-840 Light Duty /

Multi-purpose


Multi-purpose

HyFlex® 11-427Medium Duty/Cut protection

HyFlex® 11-501 Medium Duty/ Cut Protection

PolarGrip® 23-700 Heavy Duty/Thermal cold

PowerFlex® 80-813Medium Duty/

Arc Flash Protection

HyLite® 47-402 Medium Duty/ Oil Repellent

Disclaimer: Duty levels for the Chemical gloves are only indicative and are based on thickness levels within the same polymer. The Duty level does not describe the chemical resistance of the glove. Therefore, before selecting a glove for its Chemical resistance, please assess and verify the chemical resistance by consulting Chemical Guardian.

TARGET SEGMENTS: UNDERSTANDING USER NEEDS AND APPLICATIONS

14

USER NEEDS:• Chemical resistance• Abrasion resistance• Dexterity• Anti-static• Liquid repellence

solids and liquids

PREPARATION OF MATERIALS

CHEMICAL


AquaDri™


AquaDri™


Ansell Grip™


Ansell Grip™


Ansell Grip™


Ansell Grip™


Nitrile Unsupported


Nitrile Unsupported


Nitrile Unsupported



Viton Butyl Polymer

ChemTek™ 38-514Medium Duty/ Butyl Polymer

Snorkel™ 04-414 Heavy Duty/

PVC Supported

Scorpio® 08-352 Medium Duty/

Neoprene Supported


Neoprene Supported

Barrier® 02-100Medium Duty/HPPE


APPLICATIONS:• Filling vessels/tanks• Blending/compounding raw materials• Charging & discharging

15

PRODUCTION & PROCESSING

CHEMICAL


AquaDri™


AquaDri™


Ansell Grip™


Ansell Grip™


Ansell Grip™


Ansell Grip™


Nitrile Unsupported


Nitrile Unsupported


Nitrile Unsupported


Neoprene Supported


Neoprene Supported

Scorpio® 09-924Medium Duty/ Butyl Polymer



Viton Butyl Polymer


Snorkel™ 04-414 Heavy Duty/

PVC supported

PVA® 15-554 Medium Duty/PVA




APPLICATIONS:• Loading/unloading process equipment• Transferring liquids and solids between

vessels/tanks and process equipment• Supervision of running operation• Blending /compounding raw materials• Opening /draining pumps, valves or lines• Packaging and labeling

USER NEEDS:• Chemical resistance • Liquid resistance• Antistatic• Abrasion resistance• Dexterity/flexibility• Tear• Grip • Moisture management

16

PRODUCT SHIPPING

CHEMICAL


AquaDri™


AquaDri™


Ansell Grip™


Ansell Grip™


Nitrile Unsupported


Nitrile Unsupported


Nitrile Unsupported

MECHANICAL


Multi-purpose


Multi-purpose


Oil Repellent


Multi-purpose


HyFlex® 11-427Medium Duty/Cut Protection



ActivArmr® Hi-Viz™ 97-012

Light Duty / Multi-purpose

ActivArmr® 97-013 Medium Duty/ Cut Protection

PolarGrip® 23-700 Heavy Duty/Thermal Cold


APPLICATIONS:• Handling outgoing goods – cans,

vessels, bulkpack, cartons• Loading trucks & vehicles• Product shipping, transport & delivery

USER NEEDS:• Abrasion resistance • Dexterity/flexibility• Dry/oil grip• Chemical resistance

17

CHEMICAL


Ansell Grip™


AquaDri™

Virtex™ 79-700 Light Duty/

Nitrile Unsupported


Nitrile Unsupported


Nitrile Unsupported

AlphaTec® 58-270Light Duty Nitrile/

Ansell Grip™



Scorpio® 19-024 Heavy Duty/

Neoprene Supported


LAB AND RESEARCH & DEVELOPMENT

SINGLE USE

Microflex® 93-856Light Duty/

High Visibility

TouchNTuff® 92-600 Light Duty/

Splash Resistance

TouchNTuff® 92-605Light Duty/

Splash Resistance


extended cuff

NeoTouch® 25-101/201 Light Duty/ Neoprene


Splash protection

TouchNTuff® 93-250 Wet/Oily Grip

Microflex® 93-843 Light Duty /

Advanced Protection

MECHANICAL

Crusader® 42-474 Heavy Duty/Hot Thermal







ComaflameHeavy Duty/ Extreme Hot

ComahotHeavy Duty/ Extreme Hot



APPLICATIONS:• Routine and experimental testing• Charging & discharging solids and liquids• Blending / compounding raw

materials in small amounts• Unexpected leakages, spills or

other releases• Maintaining and cleaning banks,

tables and floor

USER NEEDS:• Chemical resistance• Dexterity• Flexibility• High visibility• Liquid repellence• Grip

18

REPAIR & MAINTENANCE

CHEMICAL


AquaDri™


AquaDri™


Ansell Grip™


Ansell Grip™


Ansell Grip™


Ansell Grip™


Nitrile Unsupported


Nitrile Unsupported


Nitrile Unsupported


Nitrile Unsupported

PVA® 15-554 Medium Duty/

PVA


ChemTek™ 38-514 Medium Duty/ Butyl Polymer


Neoprene Supported


Neoprene Supported

MECHANICAL


Multi-purpose


Multi-purpose



Oil Repellent


Multi-purpose


Cut Protection

Hycron® 27-805 Heavy Duty/ Oil Repellent

PolarGrip® 23-700 Heavy Duty/Thermal Cold




ActivArmr® 97-011 Heavy Duty/

Multi-purpose

WorkGuard™ 43-216Heavy Duty/

Welding

Electr. Gloves Class 00, 0, 1

Heavy Duty / Electrical

SINGLE USE



APPLICATIONS:• Opening furnaces, draining pumps,

valves or lines, crackers BTX process• Cleaning furnaces, distallations, pumps,

valves or lines, crackers BTX process• Repairing furnaces, distallations, pumps,

valves or lines, crackers BTX process• Mechanical handling – potential chemical

hazard• Mechanical handling – no chemical hazard

USER NEEDS:• Abrasion resistance• Chemical resistance• Liquid resistance• Contact heat• Dry/oil grip• Tear• Anti-static• Dexterity/flexibility• Cut protection• Moisture management• Electrical protection

19

CHEMICAL


AquaDri™


AquaDri™


Ansell Grip™


Ansell Grip™


Ansell Grip™


Ansell Grip™


Nitrile Unsupported


Nitrile Unsupported

Virtex™ 79-700 Light Duty/

Nitrile Unsupported


Nitrile Unsupported



SHEET METAL WORKSHOP

MECHANICAL


Oil Repellent


Multi-purpose

HyFlex® 11-840 Light Duty /

Multi-purpose


Multi-purpose




Easy Flex® 47-200 Light Duty/

Oil Repellent



WorkGuard™ 43-216Heavy Duty/

Welding

Crusader® 42-474 Heavy Duty/Hot Thermal

ActivArmr® 97-200 Heavy Duty/

Flame Resistance

ActivArmr® Hi-Viz™ 97-012

Light Duty / Multi-purpose

Comaflame Heavy Duty/ Extreme Hot

ComahotHeavy Duty/ Extreme Hot

SINGLE USE


TouchNTuff® 92-600 Light Duty/

Splash Resistance



APPLICATIONS:• Welding• Painting• Lock smith

USER NEEDS:• Dexterity• Flexibility• Contact heat• Flammability• Oil grip/liquid repellence• Dry and wet grip

20

CHEMICAL


Neoprene Supported

Scorpio® 19-026Heavy Duty/

Neoprene Supported


Neoprene Supported


Neoprene Supported

PVA® 15-554 Medium Duty/PVA




Viton Butyl Polymer

ChemTek™ 38-628Heavy Duty/

Viton Butyl Polymer


Butyl Plus R/0.7Heavy Duty/

Butyl

EMERGENCY RESPONSE

BODY PROTECTION

Trellchem® EVO Trellchem® VPS-Flash Trellchem® Splash 900 Trellchem® Super


APPLICATIONS:• Unexpected leakages, spills

or other releases

USER NEEDS:• Chemical resistance• Liquid resistance• Flammability• Radiant heat• Tear• Grip

21

OUR LATEST INNOVATIONS

Technology

AlphaTec® 58-435

Key Features

ANSELL GRIP Technology™provides a confident grip in slippery handling conditions, resulting in less force needed to handle wet/oily objects and reduced hand fatigue

Drip, Splash ProtectionA foldable gutter cuff helps to prevent dripping onto the forearm.

The new AlphaTec® 58-435 glove style combines the market-leading performance of ANSELL GRIP Technology™ with the flexibility and dexterity of an unsupported nitrile shell. This unique, patented design features a premium grade nitrile compound coating for versatile chemical protection and long-lasting snag, punc-ture and abrasion resistance along with a comfortable cotton-flocked lining.

Versatile Chemical Protection16 mil shell protects against contact with hydrocarbon derivatives, alcohol bases, many solvents and esters

Cotton LiningThe cotton flocked lining helps manage perspiration

Chemical / Enhanced Grip

Performance Ratings

22

All-Day ComfortFine-gauge plaited yarn, natural rubber free elasticised wrist inside prevents skin irritations.

HyFlex® 11-926

Technology Key Features

The new Ansell HyFlex® 11-926 glove combines greater comfort and efficiency with oil repellence to provide hand protection while helping the user to retain a grip on small, oil-coated parts and assembly components. This comfortable, light duty oil repellent multi-purpose glove employs Ansell’s Ripel liquid repellence and Grip technology to protect the worker’s hands against knuckle abrasion and oil exposure.

Enhanced oil gripMitigates hand fatigue and injury by addressing the most common worker frustration and enhancing efficiency and safety.

Oil impermeable barrierRepellence from drilling fluidsand oils to keep hands cleanand improve comfort.

Performance Ratings

Light Duty Oil Repellent, Oil Grip Mechanical Protection Glove

23

CHEMICAL

MEDIUM DUTY / ENHANCED GRIP PERFORMANCE AND FLEXIBILITYAlphaTec® 58-430 / 435

› Ansell Grip Technology™ actively repels oils and other lubricants away from the gripping surface via microscopic channels in the coating

› Nitrile compound coating offers superior snag, puncture and abrasion protection for long-term wear

› Snug, provides comfort, tactility and improved dexterity

› A foldable gutter cuff helps to prevent dripping onto the forearm

› The cotton-flocked lining helps manage perspiration › Antistatic according to EN1149

OPTIMAL COMBINATION OF GRIP AND CHEMICAL RESISTANCEAlphaTec® 58-530 / 535

› Revolutionary Ansell Grip Technology™ allows for improved handling of wet or oily objects with less grip force and more control

› Unique combination of liquid-proof chemical resistance and grip

› Flexibility and dexterity › Consistent polymer coating for reduction of the

likelihood of chemical leakage onto the skin › AlphaTec® models with white nylon liner are

recommended for indoor applications, AlphaTec® models with black acrylic liner are recommended for outdoor applications

› Antistatic according to EN1149

› Chemical gloves with AlphaTec® AquaDri™ two-layer construction keeps hands dryer for longer and greater comfort and performance

› Moisture Management Technology: AquaDri™ technology with an inner soft foam coating offers unrivaled moisture absorption: up to 10 times more than traditional cotton-flocked linings on average

› Greater comfort and performance › Superior nitrile film and high-performance nitrile

compound for advanced chemical protection and superior snag, puncture and abrasion protection compared to rubber or neoprene

› Improved dry and wet grip › Antistatic according to EN1149

CHEMICAL GLOVES WITH NEW AQUADRI™AlphaTec® 58-330 / 335

Technology

Performance Ratings

Sizes: 7-11

CATEGORY III

Technology

Performance Ratings58-430

58-435

Sizes: 7-11

CATEGORY III

Technology

Performance Ratings

Sizes: 7-11

CATEGORY III

24

› Sets new standards for mechanical performance, with unrivalled abrasion resistance and puncture resistance almost twice that of the current leading nitrile

› 100% sampling testing: every glove is individually subjected to a leakproof test and checked for defects before dispatch

› Every glove individually air-pressure tested. › ISO 9001 certified. › Antistatic according to EN1149

CHEMICAL

› Excellent chemical protection with a new level of grip, fit and comfort

› Raised-diamond pattern for superior grip on wet or slippery materials

› Form-fitting fingers and a tapered wrist for a more comfortable, ergonomic fit

› A nitrile glove designed to deliver optimal results in wet or dry work environments where chemical resistance is crucial

› Fully reusable, with an unequaled abrasion resistance, providing superb comfort for the wearer


CHEMICAL RESISTANT GLOVE FOR A RANGE OF APPLICATIONSSolvex® 37-676

HEAVY DUTY/SUPERIOR CHEMICAL PROTECTIONSolvex® 37-185 / 186

› Designed to deliver optimal results in wet or dry work environments where chemical resistance is crucial

› Fully reusable, with an unequaled abrasion resistance, providing superb comfort for the wearer

› Sandpatch finish for a smooth surface that decreases indirect costs due to fewer rejects of fragile parts


Performance Ratings

Sizes: 7-11

CATEGORY III


37-186

Sizes: 7-11

CATEGORY III

PREMIUM NITRILE GLOVE FOR HIGH-RISK CHEMICAL HANDLINGSolvex® 37-900

Performance Ratings

Sizes: 7-11

CATEGORY III

25

CHEMICAL

› AlphaTec® 58-270 benefits from the industry-leading grip with an enhanced dexterity and comfort

› The thin, double-wall nitrile shell and 15-gauge seamless nylon liner offer users excellent tactility and flexibility

› Wherever chemicals, oil and grease are present, AlphaTec® gloves provide the best grip due to Ansell Grip Technology™


ANSELL GRIP TECHNOLOGY COMBINED WITH OUTSTANDING DEXTERITYAlphaTec® 58-270

Technology

Performance Ratings

Sizes: 6-11

CATEGORY III

TOP OF THE RANGE NEOPRENE GLOVEScorpio® 09-022

› Top quality neoprene coating. Protects against a wide range of oils, acids, caustics, alcohols and many solvents. Good resistance to all mechanical hazards.

› Special Hi-Lo insulated gauntlet option with quilted cotton liner, for use in both hot and cold temperatures.

› Permits intermittent handling in hot liquids up to 180°C and handling in cold temperatures down to -25°C Comfortable anatomical glove shape which follows the contours of the hand at rest. Improves dexterity and reduces hand fatigue.

Performance Ratings

Sizes: 8-11

CATEGORY III

CHEMICAL AND HEAT RESISTANCEScorpio® 19-024

› Combines the flexibility and chemical resistance of neoprene with the comfort and heat resistance of a soft thermal liner

› Designed to protect the users in applications with thermal and chemical risks

› Excellent mechanical and chemical properties › Unaffected by detergents and cleaning solutions › Excellent protection against greases and oils › Superior flexibility and grip › Provides protection from intermittent contact with

hot surfaces up to 180°C (355°F) › Antistatic according to EN1149

Performance Ratings

Sizes: 7, 10

CATEGORY III

26

CHEMICAL

TOP OF THE RANGE NEOPRENE GLOVEScorpio® 09-924 / 928

› Top quality neoprene coating › Protects against a wide range of oils, acids, caustics,

alcohols and many solvents › Good resistance to all mechanical hazards › Comfortable anatomical glove shape fitted to the

contours of the hand at rest for improved dexterity and reduction of hand fatigue

Performance Ratings

Sizes: 10

CATEGORY III

A ROBUST NEOPRENE GLOVE WITH A COMFORT OF INTERLOCK KNIT LINERScorpio® 08-354

› Extremely comfortable to wear due to a soft stretchy knit liner with no seams in working area

› Cushions the hand, absorbs perspiration and prevents chafing

› Safer handling means increased productivity due to excellent wet grip

› Easier to manipulate, less tiring to the hand and easier to get on and off due to exceptional flexibility

› Neoprene coating offers wide-ranging chemical protection


Performance Ratings

Sizes: 8-10

CATEGORY III

A ROBUST NEOPRENE GLOVE WITH A COMFORT OF INTERLOCK KNIT LINERScorpio® 08-352

› Extremely comfortable to wear due to soft stretchy knit liner with no seams in working area

› Cushions the hand, absorbs perspiration and prevents chafing

› Safer handling means increased productivity due to excellent wet grip

› Easier to manipulate, less tiring to the hand and easier to on and off due to exceptional flexibility

› Neoprene coating offers wide-ranging chemical protection


Performance Ratings

Sizes: 8-10

CATEGORY III

27

CHEMICAL

MAXIMUM CHEMICAL PROTECTIONChemTek™ 38-520

› Best resistance to the most aggressive chemicals – without compromising dexterity or comfort

› Superior protection against aldehydes, ketones and esters as well as concentrated mineral acids

› High flexibility and excellent dexterity › With a natural, curved ergonomic shape and soft

feel the gloves are designed for comfort and offer easy donning and a good grip

› No risk of latex allergies due to the absence of latex proteins


Performance Ratings

Sizes: 7-11

CATEGORY III

› Delivers a unique balance of ergonomic design and tactile sensitivity with optimum chemical splash protection

› Viton® gloves provide an extra level of protection in applications involving aromatic chemicals and chlorinated solvents

› The Viton® layer over the butyl means a lower cost glove for aggressive chemical exposure

› Each pair is packed with an individual insert so critical information is always at your fingertips

THE ULTIMATE IN SPLASH AND IMMERSION PROTECTIONChemTek™ 38-612

Performance Ratings

Sizes: 8-10

CATEGORY III

MAXIMUM CHEMICAL PROTECTIONChemTek™ 38-514

› Best resistance to the most aggressive chemicals – without compromising dexterity or comfort

› Superior protection against aldehydes, ketones and esters as well as concentrated mineral acids

› High flexibility and excellent dexterity › With a natural, curved ergonomic shape and soft

feel, the gloves are designed for comfort and offer easy donning and good grip

› No risk of latex allergies due to the absence of latex proteins


Performance Ratings

Sizes: 7-11

CATEGORY III

28

CHEMICAL

› ChemTek™ Viton®/butyl 38-628 offers superior protection against aliphatic, halogenated & aromatic hydrocarbons (benzene, toluene, xylene), as well as concentrated mineral acids

› ChemTek™ gloves are surprisingly flexible and provide excellent dexterity. Designed for comfort – with a natural, curved ergonomic shape and soft feel – they offer easy donning and good grip

› The absence of latex proteins means there’s no risk of latex allergies


MAXIMUM PROTECTION FROM HAZARDOUS CHEMICALSChemTek™ 38-628

Performance Ratings

Sizes: 9, 10

CATEGORY III

EXTREME RESISTANCE AGAINST A WIDE RANGE OF CHEMICALSBarrier® 02-100

› Chemical resistant, 5 layer laminated glove › Hand-specific and ergonomic design › Wide Spectrum Resistance. › 100% inspected. Each glove is individually air-

pressure tested.

Performance Ratings

Sizes: 6-11

CATEGORY III

29

› Ideal for dry or slightly oily applications that require light mechanical protection and high levels of handling finesse

› Well-suited to light assembly applications as well as to the needs of logistics and warehousing

› Use of Spandex elastics prevents risk of latex allergy, while the silicone-free glove reduces potential contamination of the products

› Fit for special purpose › Antistatic according to EN1149

LIGHT DUTY/ MULTI-PURPOSEHyFlex® 11-801

› FORTIX™ nitrile foam coating provides enhanced dry grip and abrasion performance

› High abrasion resistance – three times the abrasion performance of other light-weight knit-dipped gloves

› Form-fitting liner matches the natural contours of the hand to create a more comfortable wearing experience

› Silicone-free for product protection


MECHANICAL

LIGHT DUTY/ OIL RESISTANTHyFlex® 11-926

› Oil impermeable barrier provides repellence from fluids and oils to keep hands clean and improve comfort

› Ansell Grip Technology™ actively repels oils and other lubricants away from the gripping surface via microscopic channels in the coating

› Fine-gauge plaited yarn provides all-day comfort, natural rubber-free elasticised wrist inside prevents skin irritations


Technology

Performance Ratings

Sizes: 6-11

CATEGORY II

Performance Ratings

Sizes: 6-11

CATEGORY II

Technology

Performance Ratings

Sizes: 6-11

CATEGORY II

30

MECHANICAL


› FORTIX™ nitrile foam coating provides enhanced dry grip and abrasion performance

› High abrasion resistance – three times the abrasion performance of other light-weight knit-dipped gloves

› Form-fitting liner matches the natural contours of the hand to create a more comfortable wearing experience

› Silicone-free for product protection

Technology

Performance Ratings

Sizes: 6-11

CATEGORY II

MEDIUM DUTY/ CUT PROTECTIONHyFlex® 11-727

› The new INTERCEPT™ cut resistance yarn has been tested to perform at or exceed industry standards. This Ansell proprietary technology offers best-in-class cut protection and increased comfort and dexterity.

› The palm coating design improves worker grip, extends glove life in abrasive conditions and allows the back-of-hand to breath

› Grey coating hides dirt in environments with dirt exposure

Technology

Performance Ratings

Sizes: 6-11

CATEGORY II

NEW


› Light duty 18 gauge liner provides barehand-like dexterity

› EN level 3 cut protection › Soft, sheer Dyneema® Diamond Technology fiber

for ultimate comfort › EN level 3 abrasion protection › Thin, tough coating for high tactility and long glove

life › D3 pinky tailored to match natural hand contours

Technology

Performance Ratings

Sizes: 6-11

CATEGORY II

31

MECHANICAL


› Water-based process is environmentally friendly, and has an innovative coating

› Water and oil repellent treatment on both the liner and coating

› Silicone-free and DMF-free › Excellent abrasion resistance › Made from high performance and highly visible

fibers resisting to heat up to 100°C (212°F)

Performance Ratings

Sizes: 7-10

CATEGORY III

SEAMLESS KNITTED GLOVE/WATER AND OIL REPELLENTHyFlex® 11-425

› Seamless knitted glove, gauge 13 › Made from Intercept Technology yarn › Incorporates the Marigold® Industrial Indicator

System recommended for use in a high level hazard area, thus the maximum cut level (i. e., 5)

› Sensitive gray water-based mix synthetic compound palm fit coating

› Water and oil repellent treatment on both liner and coating

› Silicone-free and DMF-free

Performance Ratings

Sizes: 6-11

CATEGORY III

Technology

Performance Ratings

Sizes: 6-11

CATEGORY II


› The new INTERCEPT™ cut resistance yarn has been tested to perform at or exceed industry standards

› This Ansell proprietary technology offers best-in-class cut protection and increased comfort and dexterity

› The palm coating design improves worker grip, extends glove life in abrasive conditions and allows the back-of-hand to breath

› The Silicone-free PU Coating is more process friendly in use when metal parts will be painted

› Grey coating hides dirt in environments with dirt exposure

NEW

32

MECHANICAL

HEAVY DUTY/ HOT THERMALCrusader Flex® 42-474

› Non-woven felt insulation and a full-length heat barrier designed for intermittent handling of objects up to 180°C (400ºF)

› Two-piece construction eliminates outseams for better finger comfort, dexterity and flexibility

› Bonded nitrile coating protects against snags, punctures, abrasions and cuts

› Provides excellent grip when handling dry or oily surfaces

› Contains no asbestos › Back of hand heat insulation

Performance Ratings

Sizes: 9, 10

CATEGORY III

› Flame resistant so the glove will not melt, drip, shrink or propagate a flame if exposed to a flash fire

› Provides Hazard/Risk Category (HRC) Level 2 Arc Flash protection (ATPV) 12 cal/cm2

› Designed with a unique yarn engineered with DuPont™ Kevlar® fiber


FLAME RESISTANT/ARC FLASH PROTECTIONPowerFlex® 80-813

Technology

Performance Ratings

Sizes: 6-11

CATEGORY III

› A rugged winter glove that outwears leather, sheds water, resists salts and chemicals and keeps hands really warm

› Polyurethane foam insulation for extra warmth and comfort

› Rough-finish PVC coating provides unbeatable gripping power on wet and slippery surfaces


HEAVY DUTY/ THERMAL COLDPolarGrip® 23-700

Performance Ratings

Sizes: 9, 10

CATEGORY III

33

MECHANICAL

› 100% natural rubber electrical insulating gloves › Available in yellow and black and in a choice of

classes and lengths › Manufactured using proprietary natural rubber

process in our ISO 9001 and ISO 14001 world class manufacturing facility

INDUSTRIAL ELECTRICAL RUBBER INSULATING GLOVESMarigold® ElectricianClass 00, 0, 1

Length: 11”, 14”

Sizes: 8-11

CATEGORY III

EN 60903

HEAVY DUTY / THERMAL COLDActivArmr® 97-011

› 2 ply approach keeps yours hands warm in cold conditions while keeping the entire system breathable

› 3/4 nitrile dip provides protection from direct wind, liquid and cold impact. Sandy nitrile finish ensures secure grip in multiple applications

› The soft inner layer of acrylic terry and the nitrile coating provides comfort and dexterity

› Ergonomically designed shape ensures perfect fit and decreases hand fatigue

› A contrasting black coating against the bright orange liner offers extra visibility in low or poor light conditions

Performance Ratings

Sizes: 8-11

CATEGORY II

34

SINGLE USE

A UNIQUE COMBINATION OF ALLERGY PREVENTION AND COMFORTNeoTouch® 25-101 / 201

› Appropriate for the prevention of type I allergies › Excellent resistance to acids, bases and alcohols › Polyurethane inner-coating that ensures easy

donning › Textured fingertips provide a secure grip in both dry

and wet condition › Resistant to most acids, bases and alcohols

Performance Ratings

Sizes: 6.5-10

CATEGORY III

GOOD GRIP AND FLEXIBILITY/SINGLE-USE GLOVETouchNTuff® 93-250

› Ansell Grip Technology™ offers needed grip for wet or dry objects

› Offers 3 times more puncture resistance than latex or PVC disposable gloves

› Proprietary nitrile formulation provides comfort for long wear periods


Performance Ratings

Sizes: 6.5-10

CATEGORY III

› Bright orange colour allows hands to be visible in low light situations and at greater distances, resulting in increased safety conditions for a variety of work environments

› Extended cuff offers an increased level of protection in an exam grade glove in the highly sensitive wrist and forearm areas

› Textured fingers ensure a strong grip and maximum worker protection

› Powder-free and not made with natural rubber latex, to help protect from Type 1 skin allergies, skin irritation and dryness

DISPOSABLE/LIQUID PROOF/HIGH VISIBILITYMicroflex® 93-856

Performance Ratings

Sizes: 6.5-10

CATEGORY III

› Resists a greater variety of industrial chemicals for longer periods than any other nitrile disposable glove

› With a unique “Thin Nitrile Technology” formulation, this glove offers easy donning and strong grip in wet or dry conditions

› The 92-605 longer cuff glove provides the wearer with a high level of comfort and increased protection in the forearm

› The 92-600 is Antistatic according to EN1149

PROVEN SPLASH RESISTANCE AGAINST HAZARDOUS CHEMICALSTouchNTuff® 92-600 / 605


92-605

Sizes: 6.5-10

CATEGORY III

35

BODY PROTECTION

HAZMAT SUITTrellchem® VPS-Flash

› Cost-efficient high-performance gastight suit providing excellent chemical protection

› NFPA 1991 incl. the optional Chemical Flash Fire and Liquified gas requirements

› EN 943-1 and EN 943-2/ET › Protection against Infective agents EN 14126 and radioactive

particles EN 1173-2 › SOLAS approval › Built on Nomex® fabric with chloroprene rubber top-coating and

a multilayer barrier film › Gloves attached with Trellchem Bayonet ring system › Built-in suit ventilation › Sizes: XS to XXL

Trellchem® Splash 900 CHEMICAL PROTECTIVE SUIT

Full-body splash protection for use by both emergency back-up teams and in industry, where a gastight suit is not required yet good protection is needed.

› Certified to EN 14605 type 3/liquid tight › Non-encapsulating splash protection › Soft and flexible › Good against alkalis and acids › Approved for work in explosive atmospheres

36

BODY PROTECTION

CHEMICAL PROTECTIVE SUITTrellchem® Super Freeflow

Combined respiratory protection and gastight chemical protection. Designed for use with external airline, without the use of an SCBA, and therefore is specially aimed at industrial use.

› Certified to EN 943-1 › Air fed › Slim design › Offers better comfort › Possible to work longer time › Protection against acids (incl HF), alkalies, solvents

(also chlorinated), aromatics and petroleum products

EVO-CV

HAZMAT SUITTrellchem® EVO

› Top-of the line gastight hazmat suit providing maximum protection against the most aggressive chemicals in all forms, incl. warfare agents. Certified to the worlds toughest standards.

› NFPA 1991 incl. the optional Chemical Flash Fire and Liquified gas requirements

› EN 943-1 and EN 943-2/ET › Protection against Infective agents EN 14126 and radioactive

particles EN 1173-2 › Antistatic according to ATEX, for the highest explosive risk zone › Built on Nomex® fabric with Viton rubber top-coating and a

multilayer barrier film › Gloves attached with Trellchem Bayonet ring system › Built-in suit ventilation › Sizes: XS to XXL

EVO-T

37

ANSELL GLOBAL VENDING SOLUTIONS

OUR UNIQUE VEND-READY PACKAGING!

SAFETY AND CONVENIENCE THAT GO HAND-IN-HAND

Over 50 branded styles available, including HyFlex®, AlphaTec® and TouchNTuff®

No more guessing what style and size you’re selecting from the machine

Shrink-wrapped folded gloves ensure a tight package for consistent vending

Compatible with most leading vending machines including Helix and Carousel

Successfully placed in over 50,000 vending machines worldwide

Patent-pending folding technique assures consistent dispensing of product

38

A VENDING CONCEPT THAT BENEFITS YOUR BUSINESS

• Saves on labour costs by eliminating repackaging

• Consistent length, width and thickness measurements reduce refill time

• Proven dispensing of product reduces downtime of vending machines

• Sell sheets with detailed specifications

GLOBAL SUPPORT

• All global distributor locations and factories can source the same products

• Sales support throughout North America, Latin America, Asia and Europe

• Providing just-in-time delivery with inventory in global strategic locations throughout North America, Europe and Asia

• Fully integrated into our US patented Ansell Guardian™ methodology, includes sales data, rationalisation analysis and product placement optimisation

• Guides for glove training, selection and chemical compatibility

39

© 2015 Ansell Limited. All rights reserved.

Ansell, ® and ™ are trademarks owned by Ansell Limited or one of its affiliates, except as indicated below:

Dyneema® is a trademark owned by Royal DSM N.V; Lycra® is a trademark owned by INVESTIA; Marigold® is a trademark owned by Freudenberg Home and Cleaning Solutions; Trellchem® is a trademark owned by Trelleborg AB; DuPont™ and Kevlar® are trademarks and registered trademarks of E. I. du Pont de Nemours and Company used under license by Ansell Protective Products Inc.

Products that provide “cut resistance” and “cut protection” or “puncture resistance” and “puncture protection” do not completely prevent or eliminate the potential for cuts or punctures, and are not intended or tested to provide protection against powered blades, serrated or other sharp or rotating equipment. Products that provide vibration resistance, “abrasion resistance” or “abrasion protection” do not completely prevent or eliminate the potential for vibration or abrasion-related injuries. Products that provide “chemical resistance” or “chemical protection” do not completely prevent or eliminate the potential for injury due to chemical exposure. Products that provide “resistance” to oil or grease or which are “oil repellant” do not completely prevent or eliminate the potential for oil or liquid penetration or absorption. Products that provide “snag resistance” or “snag protection” do not completely prevent or eliminate the potential for snags or friction-related injuries. Products that provide protection against sparks or flame are not “fire-proof” and do not completely prevent or eliminate the potential for burns or associated injuries. Products that provide protection or resistance against heat or cold are not intended for use in extreme temperatures - use only as specified. Products containing natural rubber latex may cause allergic reactions in some individuals.

Users are encouraged to always use caution and care when handling sharp or abrasive materials, chemicals, or other hazardous or dangerous substances. Any information or data provided is based upon Ansell’s current knowledge and understanding of the subject matter, and is offered solely as a possible suggestion for use in making your own decisions or product choices. Product users should conduct all appropriate testing or other evaluations to determine the suitability of Ansell products for a particular purpose or use within a particular environment. It is the responsibility of a product user to assess the level of risk and to determine the protective equipment required or appropriate for the user’s particular purpose. Ansell may revise this information as new information, knowledge or experience becomes available. ANSELL DISCLAIMS ALL WARRANTIES OTHER THAN AS EXPRESSLY PROVIDED.

About AnsellAnsell is a world leader in providing superior health and safety protection solutions that enhance human well-being. With operations in North America, Latin America/Caribbean,

EMEA and Asia, Ansell employs nearly 14,000 people worldwide and holds leading positions in the personal protective equipment and medical gloves market, as well as in the

sexual health and well-being category worldwide. Ansell operates in four main business segments: Medical, Industrial, Single Use and Sexual Wellness. Information on Ansell and its

products can be found at www.ansell.eu

For more information, contact your Ansell representative or visit ansell.com

EuropeAnsell

Riverside Business Park Blvd International, 55

1070 Brussels, BelgiumTel. + 32 2 528 74 00Fax + 32 2 528 74 01

[email protected]

RussiaAnsell

123610 Россия, Москва Краснопресненская

Наб. 12, п.3, оф. 1304AТел. +7 495 258 13 16

AustraliaAnsell

Level 3, 678 Victoria Street Richmond, Vic. 3121

AustraliaTel. + 61 1800 337 041

Date post:	21-Aug-2018
Category:	Documents
Upload:	phamthuy
View:	213 times
Download:	0 times

CHEMICAL - Ansell Catalogue · is based on the Six Sigma process ... Safety solution that analyses...

Documents