A&GMAINTENANCE FREE SOLUTIONS TO EROSION AND CORROSION
Industrial Services Inc.
SPECIALTY COATINGS and LININGSDUSTLESS SANDBLASTINGCOMPOSITE CARBON FIBER APPLICATIONS
Nuclear, Oil & Gas Water & Waste Water
Utility & Power Chemical & Industrial
A&G Industrial Services, Inc., provides the highest quality, most cost effective solution for your plant’s coatings & lining requirements. We offer turnkey application services, work package development, quality control programs and maintenance free solutions.
A & G is the industries’ most trusted specialty contractor for turnkey projects for the corrections of erosion, corrosion and process control problems. Today, more than ever, A & G continues to pioneer in the field of applied polymeric technology with the highest certainty of outcome for use in a broad spectrum of industrial applications including; rebuilding, resurfacing, and specialty corrosion resistant coatings and linings for cool-ing water, treated water, pollution control systems and the severest corrosive and abrasive environments.
Coatings & Lining Services
• Above Ground Tank Interiors & Exteriors
• Fuel Tanks & Piping
• Fiber Reinforced Epoxy Tank Bottoms
• Buried Tank Liners
• Buried Pipe Liners
• Condenser Tube Sheets
• Water Boxes
• Penstocks, Gates & Flumes
• Pipe Line
• Silos
• Wet & Dry Scrubbers
• Spray Dry Absorbers
• Fabric Filters
• Plant Duct Work
• Stacks
• Pumps
• Floors
• Second Containments & Basins
• Structural Steel
• Lead Abatement & Lead Encapsulation
• Other Critical Equipment
Carbon Fiber Reinforcement Application Services
• Pipe & Penstock Internal & External Linings
• Tank External Wraps
• Tank Internal Reconstruction
• Concrete Peers & Columns
• Pedestals, Slabs, Tilt Up Walls
• Seismic Reinforcement
• Stacks & Chimneys
• Miscellaneous Equipment
• I-Beams, Wood Beams & Concrete Beams
• Utility Tunnels
• Bridges
• Feasibility Study and Preliminary Problem Evaluation
• Material Supply
• Contractor Training and Certification
• Installation Oversight
• Inspection and Quality Control
• Testing and Validation
• Engineering, Design and Specification
MAINTENANCE FREE SOLUTIONS TO EROSION AND CORROSION
Surface Preparation Services• High Energy Piping Surface Preperation
• Dustless Sand Blasting
• Grit Blasting
• Vacuum Blasting
• Sponge Blasting
• UHP Water Blasting
• Dry Ice & Soda Blasting
This is the Ultimate Benefit to our Customers.A & G is very proud of our daily approach to safety & envi-ronmental awareness. At A & G Industrial we have created a culture that being safe is a company and employee driven mission that starts at the beginning of each shift with a daily job hazard analysis that each employee participates in actively. Throughout the day with frequently perform 2-minute drills as tasks change to keep our employees empowered that being safe starts with knowing how to be safe.
A & G employs several NACE Certified coating inspectors as members of our team to enable us to provide our customers with an enhanced quality management process to ensure the long term maintenance free solutions for the best life cycle values for our customers investments into corrosion control & correction. A & G also employs a polymer chem-ist for the assistance in product selections and application strategies for our customers demanding corrosion preven-tion needs.
Proud of Our Approach to Safety
A&GIndustrial Services Inc.
• Site Assessments• Corrosion Evaluations• Engineering, Design and Specification Writing• Material Selection & Supply• Contractor Training Certification• Technical Oversite• Project Management• 3rd Party NACE Inspection• Quality Control Programs• Failure Analysis Testing• Laboratory Testing
Professional Services
508 591-8400 • www.AandGindustrial.com
Nuclear Oil & Gas
Water & Waste Water Utility & Power
Chemical & Industrial
Office: 508 591-8400 • Fax: 508-591-8401 www.AandGindustrial.com
A&G Industrial Services Inc.
214B South Meadow Rd, Plymouth, MA
Let Us Offer Our Services to You
A & G specializes in Carbon Fiber & Fiber Reinforced applications for the repair & reinforce-ment of piping, tanks, equipment & the seismic reinforcement of structures. A & G provides turnkey application through the US
A&G Industrial Services Inc.
Testimonials If every crew was as awesome as this one my life would be a cake walk. Your guys do not mess around. Ex-tremely professional, very safety conscious and the housekeeping is out of this world. We really enjoyed having A&G onsite, and look forward to working with you again in the future.
Sam WardMaintenance TechnicianExelon Power
I just wanted to send this ‘thank you’ to let you and your employees know that we really appreciated the efforts put forth on both the Forney and Fort Myers projects. Also, I can’t say enough about your site fore-man John and his diligence and attention to detail. He did a magnificent job handling your crew as well as going the extra mile on many different fronts. In addi-tion to John, everyone on your crews was professional and hard working. In every case, your crew was on or ahead of schedule which allowed the project to run smoothly for our utility client.
Respectfully,Eric E. JonesSr. EngineerStructural Integrity Associates, Inc.
Diversified Technology System has been utilizing A & G Industrial Services, Inc., for about 11 years exclusively for internal coating of all our pressure vessels utilized
A& G Industrial Servcies, Inc., 214B South Meadow Road, Plymouth, MA 02360 Office: 508 591-8400 • Fax: 508-591-8401 • www.AandGindustrial.com
in the nuclear industry for use as demineralizers. A & G Industrial Services quality of work has always been excellent and their quality assurance programs very helpful. They have always accommodated our every request and have been very easy to work with.
DTS plans to use A & G for all its future vessel coatings and would strongly recommend them to any utility for there outstanding capabilities and service.
Best Regards,Dennis BrunsellVP Technology
A&G Industrial Services provided the highest qual-ity, most cost effective solution to our plant coatings needs. They are at the top of our list of contractors to provide tank lining and nuclear service level coatings applications and maintenance. This company provided a turnkey package that covered quality control, plan-ning, work package development and implementation. The work crew and supervision were first class, highly skilled, and accommodating to plant restrictions and requirements. Most of all they are a pleasure to work with.
Sincerely,Andrew PatrzalekEngineerGinna Nuclear Power Plant
