Chemical Products Finder September 2015

SE

PTE

MB

ER

2015M

UM

BA

IVol. 34 N

o.4C

hemical P

roducts Finder

The Journal of Materials & Equipment for the Process Industrieswww.cp� ndia.com

Vol. 34 No. 4Total Pages 60

September 2015Mumbai

` 100

` 100

ChemTECHWORLD EXPO

South 2015 10-12, December 2015

Chennai, India

Gujarat 201610-12, February 2016

Ahmedabad, India

Mumbai 201714-17, February 2017

Mumbai, India

Environment Management Solutions (Water & Waste Water)

Energy Conservation | Environment | Process Efficiency www.forbesmarshall.com

P B # 29, Mumbai Pune Road, Kasarwadi, Pune 411 034, India. Tel. +91 20 27145595, 39858555, Fax. +91 20 27147413

A-34/35, M.I.D.C., H Block, Pimpri, Pune 411 018, India. Tel. +91 20 27442020, 39851100, Fax. +91 20 27442040

Forbes Marshall ArcaForbes Marshall Codel International Krohne Marshall Forbes Solar Forbes Vyncke Forbes Marshall Steam Systems

H

Salinity

Conductivity

TOC

H

Nitrate

Dissolved

Oxygen

Forbes Marshall is a leader in the area of process Oxygen, TDS, ORP measurements for diverse

efficiency and energy conservation with over sectors in the process industry. We provide

seventy years of experience building steam solutions for on line water quality requirements

engineering and control instrumentation for ultrapure water, pure water, wastewater and

solutions for the process industry. process applications. We also cater to municipal

water treatment plants.

Four decades ago, we introduced online pH and

conductivity measurement technology in the To know more our wide rage of innovative

Indian market. Today, we provide a wide range products and solutions for pure water, drinking

of water quality analytical systems with 2 wire water, waste water and process applications,

HART series of pH, Conductivity, Dissolved write in to us at [email protected].

Complete Water Analysis Solutions

Innovative products and services for water and waste water

4 | September 2015 | Chemical Products Finder

CHEMICAL PRODUCTS FINDERRNI REGISTRATION NO. 39849/82

Chairman Jasu ShahPublisher & Printer Maulik Jasubhai ShahChief Executive Officer Hemant Shetty

EDITORIALEditor Mittravinda Ranjan ([email protected])Asst Editor Harshal Desai ([email protected])Sub-Editor Bernard Rapose ([email protected])Design Team Arun Parab, Umesh ChouguleEvents Management Team Abhijeet MirashiMarketing Co-ordinator Brenda FernandesSubscription Team Dilip ParabProduction Team V Raj Misquitta (Head), Arun Madye

PLACE OF PUBLICATION:Jasubhai Media Pvt LtdTaj Building, 3rd Floor, 210 Dr D N Road, Fort, Mumbai 400 001Tel: +91-22-4037 3636, Fax: +91-22-4037 3635

SALES General Manager, Sales: Amit Bhalerao ([email protected]) Prashant Koshti ([email protected])

MARKETING TEAM & REGIONAL OFFICESMumbai: Godfrey Lobo / V Ramdas Taj Building, 3rd Floor, 210 D N Road, Fort, Mumbai 400 001 Tel: +91-22-4037 3636, Fax: +91-22-4037 3635 E-mail: [email protected], [email protected]

Ahmedabad: Vikas Kumar 64/A, Phase-1, GIDC Industrial Estate Vatva, Ahmedabad 382 445 Tel.: +91-79-4900 3636, Ext: 627, Fax: +91-79-2583 1825 Mobile: +919712148258 E-mail: [email protected]

Vadodara: 202 Concorde Bldg, Above Times of India Office R C Dutt Road, Alkapuri, Baroda 390 007 Telefax: +91-265-2337189

Bengaluru: Princebel M Mobile: +919444728035 E-mail: [email protected]

Chennai/Coimbatore: Princebel M / Yonack Pradeep 1-A, Jhaver Plaza, 1st Floor, Nungambakkam High Road Chennai 600 034 Tel: +91-44-4312 3936 Mobile: +919444728035 / +919176963737 E-mail: [email protected] / [email protected]

Delhi: Priyaranjan Singh / Suman Kumar 803 Chiranjeev Tower, Nehru Place, New Delhi 110 019 Mobile: +919818148551 Tel: +91-11-46745555, Fax: +91-11-2642 7404 E-mail: [email protected] / [email protected]

Hyderabad: Princebel M / Sunil Kulkarni Mobile: +919444728035 / +919823410712 E-mail: [email protected] / [email protected]

Kolkata: E-mail: [email protected]

Pune: Sunil Kulkarni Suite 201, White House, 1482 Sadashiv Peth, Tilak Road, Pune 411 030 Tel: +91-20-2449 4572, Telefax: +91-20-2448 2059 Mobile: +919823410712 E-mail: [email protected]

Single Copy Price: ` 100/-, Annual Subscription: ` 1,080/-

Jasubhai Media Pvt Ltd

Registered Office: 26 Maker Chambers VI, 2nd Floor, Nariman Point, Mumbai 400001, INDIATel: +91-22-4037 3737, Fax: +91-22-2287 0502, E-mail: [email protected]

CHEMICAL PRODUCTS FINDER (CPF) is a product-based news magazine designed to serve the business-information needs of the chemical, process and allied industries in India. It carries profiles of all kinds of chemical products, plant and equipment, process materials, and services - both Indianand foreign with illustrations.

Printed and published by Mr Maulik Jasubhai Shah on behalf of Jasubhai Media Private Limited, 26 Maker Chambers VI, Nariman Point, Mumbai 400 021 and printed at Anitha Art Printers, 29-30, Oasis Ind Estate, Next to Vakola Market, Santacruz (E), Mumbai 400 055 and published from Mumbai. Editor: Ms Mittravinda Ranjan, 26, Maker Chambers VI, Nariman Point, Mumbai 400 021.

AN ISO 9001-2008 CERTIFIED COMPANY

INTERVIEWS

Arvind Ltd – Advanced Materials Delivers Outstanding Filter Fabrics”- Sohil Deshmukh, Chief Manager- Industrial Fabrics, Advanced Materials – Arvind Ltd, Gujarat 6

FEATURES

Challenges in Setting Up ETP for Refineries- Satya Narayana Y V V, SFC Environmental Technologies Pvt Ltd 10

Innovative Membrane Technologies for Boiler Feed Water- Pinakin J Sampat, Technical Adviser and Consultant & Mukesh C Khagram, Director, Evergreen Technologies Pvt Ltd 15

Enhanced Biosolids Treatment- John Tattersall, Global Director – Water Technology, Black & Veatch and Rajesh Patwardhan, Director – Business Development, Black & Veatch Water, India 19

FOCUS PRODUCTS

Environment Management Solutions, Water and Waste Water 22

GENERAL PRODUCTS 30

INDUSTRY NEWS 48TECHNOLOGY NEWS 51PROJECT UPDATE 52FORTHCOMING EVENTS 54BOOKSHELF 55PRODUCT INDEX 56ADVERTISERS’ INDEX 58

CONTENTSPUBLISHED SINCE 1982

Vol. 34 No.4 SEPTEMBER 2015 Mumbai ` 100

Environment Management Solutions, Water and Waste Water

Cover Page Photo Courtesy: Chembond Chemicals Ltd, Navi Mumbai

Chemical Products Finder | November 2013 | 57

Advt.indd 57 17-12-2013 12:21:18

Inte

rvie

w


"Arvind Ltd - Advanced Materials delivers outstanding Filter Fabrics"

The advent of research and development activity has resulted into expanding boundaries of textile industries creating new avenue for advanced products in form of speciality meshes, filtration fabrics, outdoor fabric, coating substrate, automotive textile, etc. Each product in their individual section caters to wide range of applications keeping into consideration and maintaining product characteristic such as rigidity, strength, dimension stability, design flexibility and most important factor considering all is economical viability. For this product customization also play a key role that can be availed by different converting operation resulting into value addition which are also one of the key model of this industry. Mr Sohil Deshmukh, Chief Manager – Industrial Fabrics, Advanced Materials - Arvind Ltd shares insights about the company in an exclusive interview with Bernard Rapose.

Sohil DeshmukhChief Manager – Industrial FabricsAdvanced Materials - Arvind LtdGujarat 382 721E-mail: [email protected]

Could you brief us about overall business activities of Arvind Ltd and Advanced Materials?

Arvind Ltd is the flagship enterprise of Lalbhai Group incorporated in 1931.

Today Arvind employs 28,000+ people directly and evolved as one of India's largest textile conglomerate having presence across the chain from yarns to finished goods. With a turnover of USD 1.50+ Billions Arvind is satisfying customers from various segments worldwide

Advanced Materials is an ISO 9001: 2008 Certified manufacturing facility producing high performance protective and industrial fabrics. We are committed to offer textile solutions for rapidly growing sectors like general industrial manufacturing and processing, infrastructure, transport, energy and personal protection. Our fabrics are produced with world class technology and know-how based on a strong foundation of knowledge, research and market needs.

Where is the facility and what are the various Certifications acquired over the past few years?

Advanced Materials facility is based at Arvind Ltd, Santej, Gujarat. It’s in close proximity to Ahmedabad.

Our manufacturing facility posses various Certifications such as ISO 9001: 2008, SA 8000: 2008, ISO 14001, etc.

In what combinations are filter fabrics made available that caters to to the needs of every industry?

We offer fabrics in the all possible combinations and permeability range.

We are known for our consistency in mono-filaments and multi-filament fabrics for demanding applications.

Our fabrics are available in microns range from 1 micron to 2,000 microns. We offer fabrics with US FDA, European FDA for various applications in food and pharmaceutical industry. We are capable of handling vast polymers such as PP, PBT, PET, NYLONS PA 12, CARBON, etc.

Inte

rvie

w


With our extensive fabric range we are providing solutions to industries such as mining, food, pharmaceuticals, chemicals, dyes, waste water treatment, etc.

Are there any special fabric that offer easy cake discharge and ability to get cleaned quickly?

Our range of special mono-filament fabrics processed through unique and ultra-modern calendaring offers one of the smoothest surfaces for the filtration for easy cake discharge.

The computer controlled air permeability measuring device delivers a fabric with consistent flow rate along the length and the width.

This results in even pore size distribution leading to consistent cake build-up across the filtration area.

"Calendaring process of Filter Fabric at Arvind Ltd."

While recommending a perfect solution for your customers, what are the things you take into consideration? What makes your fabrics different from the rest?

Filter fabrics works on many variables like equipment, throughput, process conditions, slurry parameters, etc. So after studying the details only we come up with the suggestions for the cloth. The in-house testing facility and data

from the previous trials help us to zero down on the most suitable fabric for the application and equipment.

Our fabrics are trusted because of the data which we generate while manufacturing. During the production each fabric is tapped for various technical parameters at every single stage, the data from the shipped material is maintained along with the sample for atleast 2 years. This helps us to go back and recheck if needed.

All fabrics going out are 100% inspected and confirmed by QA ensuring the customer gets the best fabric batch after batch.

We see this benefits us a lot in maintaining consistency resulting a hassle-free and reliable production for our valued customers. ◘

Feat

ures


Challenges in Setting Up ETP For RefineriesPetroleum refining is a complex operation and unit operations within refineries vary depending on the type of crude and the type of end products. Refining is a water intensive operation which generates large quantity of waste water that needs to be treated so as to avoid environmental degradation. A proper understanding of the unit operations as well as pollutant loads is necessary in order to set up a suitable Effluent Treatment Plant (ETP). This article discusses about various challenges that we have faced in the designing and operating of several Refinery ETPs in India.

Characterisation Of Waste Water In order to design an ETP for an upcoming refinery, design

parameters like the flow rate, Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Suspended Solids (SS), Oil & Grease (O&G), Sulphides, Phenols, Ammonia, etc, have to be assumed. The selection of the scheme and the estimation of unit sizes depend on the inlet characteristics and hence it is imperative that the assumed design parameters be as close to the actual parameters that will be encountered once the plant is commissioned. It is quite normal to assume higher values while designing the plants. However, one should keep in mind that some processes do not perform efficiently when they are over designed.

Typical Treatment Scheme

The treatment philosophy adopted to treat refinery waste waters consists of a series of steps to sequentially remove the pollutants so that the treated waste water meets the required regulatory norms. The typical treatment steps are:

Removal of O&G: This is necessary as downstream operations are sensitive to the presence of high levels of O&G. In a refinery waste water treatment system, two steps of oil removal are typically required to achieve the necessary removal of free oil from the collected waste water prior to feeding it to a biological system. This oil removal is achieved by using an American Petroleum Institute (API) or Tilted Plate Interceptor (TPI) or equivalent oil water separator followed by a Dissolved Air Flotation (DAF) or Induced Air Flotation (IAF) unit.

Flow Equalisation: Flow of wastewater generated from refinery from various manufacturing process units is not uniform. The flow variation is equalised by providing an equalisation tank of sufficient capacity and constant flow is maintained in all downstream treatment units. This makes the process control much easier.

Removal of Suspended Solids: This is achieved using a clarifier or it can be combined with O&G removal in a DAF unit

Removal of Sulphides: Lower sulphide concentration can be handled in biological treatment system. However, high concentrations of sulphides need to be taken care before waste water enters into biological treatment system. Oxidation of sulphides using Hydrogen Peroxide is most popular method of oxidising them.

Biological Treatment: Various biological systems have been adopted including Activated Sludge Process, Bio-tower, Sequential Batch Reactor, Anaerobic Reactors, Membrane Bioreactors, etc. Every process has its own inherent advantages and disadvantages and a suitable system has to be selected by the designer based on factors such as organic load, treatment efficiency required, land area available, etc.

Polishing of Treated Waste Water: This step includes units like Pressure Sand Filters (PSF), Dual Media Filters (DMF), Activated Carbon Filter (ACF) to remove the residual suspended solids as well organic pollutants that have passed through the earlier treatment steps.

Reuse and Recycle: As the refinery consumes large quantities of water,

Satya Narayana Y V VSFC Environmental Technologies Pvt LtdEmail: [email protected]

Feat

ures


Figure 1: Foam in refinery

it is imperative one must try and reuse the treated waste waters back in the process. Additional treatment units like Microfiltration, Ultrafiltration or Reverse Osmosis may be adopted in order to meet the reuse water quality that is required.

Challenges and Solutions in Biological Treatment of Refinery Waste Water

The key treatment step in the refinery ETP is the biological treatment as the bulk of the pollutants are removed in a cost effective manner in this step. Hence it is important to design this system in a robust manner so that it can operate efficiently. It is important to note that in the biological treatment step, the pollutants are degraded by micro-organisms and it is imperative that a conducive environment is maintained such that the micro-organisms can operate up to their maximum potential. A list of various factors that influence the design and operation of the biological system are given below:

Fluctuation of Waste Water Characteristics: One of the main challenges in refinery waste water treatment is its variation in characteristics. As mentioned earlier, when assuming the pollutant load for design of the ETP, it is normal to assume higher values so that the designs are ‘safe’. This causes problems during the operation of the ETP when the actual pollutant load is much lower. Also, based on variations in quality of crude and refining process, waste water quality also varies. The biological system should be selected to take care of these variations. The biological system should be able to vary process parameters such as air supply, Mixed Liquor Suspended Solids (MLSS), Food to Microorganism (F/M) ratio, etc, to suit variations in feed.

Modular design of biological process also helps in handling variations of waste water quality. If provided with multiple process tanks, plant can be operated based on the actual pollution load by using all process tanks or part of them.

Oil & Grease: The performance of the O&G removal equipment is sometimes

upset due to a surge in the inlet O&G quantity due to dumping of oil within the refinery. This causes O&G to slip into the biological system affecting the micro-organisms. This also causes foaming in the aeration tanks that affects the quality of the treated water. A figure showing the foaming in a biological system of a refinery is shown here (Figure 1).

Sulphides: Refinery waste waters contain high levels of Sulphides that are toxic to microbes and hence have to be removed prior to the biological treatment. In case sulphides slip into the biological system, it exerts demand on the aeration system since it consumes the oxygen that is meant for the respiration of the micro-organisms. Hence it is normal to consider a safety margin in the design of the air blowers so that it can meet any contingency due to sudden air demand because of sulphides. Care should be taken that sulphide concentration in biological system are below toxic limits.

Complex Organic Compounds and Heavy Metals: Complex organic compounds such as phenols, benzene products, etc, are also part of refinery waste water. Their concentrations depend on the source and quality of crude oil. These compounds are not easily biodegradable and may be toxic to biological system

at higher concentrations. Hence, the ETP should be designed to handle these complex organics in case they are present in waste water. Heavy metals also pose problem to biological treatment. Both complex organics and heavy metals should be taken care in pretreatment if present in higher concentrations.

Nutrients: The growth and performance of the micro-organisms depend on the availability of critical nutrients like nitrogen and phosphorous in the waste water. Ideally, a BOD:N:P ratio of 100:5:1 is required for best performance. Normally, abundant nitrogen is present in the refinery waste water. However, it is important to constantly analyse the waste water and add nitrogen (typically as Urea) and phosphorous (as Phosphoric acid or Di Ammonium Phosphate) to make up for any deficit.

Many a times, total nitrogen levels in the waste water are much more than required which necessitates treatment to reduce them. Hence, the biological system selected should be able to remove excess nitrogen along with organic pollutants.

Energy efficiency: The oxygen required for the micro-organisms are delivered through fine bubble diffusers that release small bubbles of air from the bottom of the aeration basins. Air blowers are installed

Planex System:Multi-patented paddle vacuum

dryer with ZeroFriction® planetary movement eccentric agitator

CosmoDry System:Paddle vacuum dryer with concentric agitator, fitted with a shaft dismountable in sections.

Saurus939:Versatile and long

life vacuum pump for continuous recovery

of the solvents extracted

Your vacuum drying specialist

Criox System:Patented rotary vacuum dryer with electric lump-breakers

Agent for vacuum pumps

EMJAY ENGINEERS, Mr. Jayant JoshiB/102, Shubh Sarita CHS, Near Shrikirshna Nagar,Appasaheb Sidhaye Marg, Borivali (East), Mumbai 400066Tel. 02228975275 | Mobile 9820047858E-mail:[email protected]

Brilliant technology Italian quality

[email protected] | italvacuum.com

YOUR REACH THROUGH

ADVERTISE TOEXPAND

For Details Contact:

Jasubhai Media Pvt. Ltd.

rd

Taj Building, 3 Floor, 210 Dr D N Road, Fort, Mumbai - 400 001

Tel: 022-4037 3636, Fax: 022-4037 3635

Email: [email protected]

HEMICAL

C

ENGINEERING WORLD

August 2011� Vol.10 � Issue 1 � Price `100

www.pharmabioworld.com

G

o

o

d

M

a

n

u

f

a

c

t

u

r

i

n

g

P

r

a

c

t

i

c

e

s

OffshoreWorld

INSIGHT INTO UPSTREAM & DOWNSTREAM HYDROCARBON INDUSTRY

www.smpworld.com

Your Radar to Shipping, Marine & Ports World Vol - 3 Issue - 6 • JUNE - JULY 2011 • ` 100

South Special

Port Sector in South India

Interview of Y S Prasad, Kakinada Seaport

The Journal of Materials & Equipment for the Process Industries

www.cpfndia.com

Vol. 30 No. 3

August 2011

ISSN 0971-5274

` 50/-

Chemicals, Petrochemicals

& Agrochemicals

Chemica

l

Products Finder

Feat

ures


Figure 2: Typical Refinery ETP

to supply air into biological process. Air blowers constitute major portion of power consumption in the ETP. Any steps taken to optimise energy consumption shall result in energy efficiency of the plant.

Biological process should be provided with oxygen control system to supply air as per the organic pollution load coming into it. Dissolved Oxygen (DO) or Oxygen

Uptake Rate (OUR) based blower control optimizes both energy consumption and process performance. Energy efficient blowers further improve the energy efficiency of the ETP.

Process Automation: Due to variations in waste water characteristics, it is advisable to install process automation to control vital process parameters such

as DO, OUR, MLSS, Sludge recirculation, Sludge wasting, etc. This helps in automatically keeping the process parameters at their optimum levels and generates consistent quality of treated waste water.

Conclusion

Refinery waste water characterisation is very complex exercise that requires an understanding about the refining processes involved. The designing of the ETP is a challenging job as treatment units have to be robust enough to handle continuous variations in the concentration of pollutants. The operation of the biological system governs the performance of the ETP, as it removes the bulk of the pollutants. Ideal operating conditions have to be provided for the micro-organisms in order to ensure effective treatment. The biological system should be selected to handle any variations in flow and characteristics of refinery waste water. ◘

JASUBHAI MEDIA PVT LTDTaj Bldg., 3rd Floor, 210 Dr D N Road, Fort, Mumbai 400 001.

Tel: 91-022-40373636 | Fax: 91-022-40373635 E-mail: [email protected] | Website: www.chemtech-online.com

We want you to be a part of the celebration!!!

Advertise in our

October 2015

34th Anniversary Special

Grab this opportunity - an unique opportunity to align with the best in the industry

Features

Chemical Products Finder | September 2015 | 15

Innovative Membrane Technologies for Boiler Feed WaterAcceptance of Liqui-Cel membrane contactors and Electropure EDI modules has been driven by lower costs, higher water quality demands and improvements in the manufacturing techniques of the process. The unique properties of Liqui-Cel membrane contactors and Electropure EDI modules allow them to be installed in almost any location in high purity water system. The author gives an insight into the advantages of incorporating Liqui-Cel membrane contactors and Electropure EDI modules for boiler feed water.

Membrane technology has always played a significant part in the production of high and ultra-high

purity water for pharmaceutical, electronics and power industries. It is now over a decade, the conventional technologies such as forced draft degasifiers and deaerators (for removal of dissolved gases) and further ion exchange mix-bed systems (for removal of the dissolved solids have been replaced by a more efficient and reliable membrane technology such as Liqui-Cel membrane contactors and Electropure Deionisation (EDI) modules respectively.

Background

Proper treatment of boiler feed water is an important component of a boiler system. As steam is produced, dissolved solids become concentrated and deposit inside the boiler. This leads to poor heat transfer and efficiency reduction of the boiler. Dissolved gasses such as oxygen and carbon dioxide will react with the metal surfaces inside the boiler promoting corrosion. It is for this reason to incorporate improved and better technologies for removal of dissolved solids and dissolved gasses before entering the boiler.

Conventional Methods for Boiler Feed Water

Typical conventional water treatment schemes incorporate the following technologies:

• RO + degasser tower + ion exchange (two bed/mix-bed) systems + deaerator/chemical treatment.

Degasser Tower

Commonly used for removal of dissolved carbon dioxide. Degasser towers are typically tall towers in mild steel rubber lined construction with packed column and

mounted on mild steel rubber lined storage tank. The degasser tower limits the outlet carbon dioxide to 5-6 ppm. This becomes an additional load on to the downstream anion exchange/mix-bed units.

For every 1 ppm carbon dioxide, the feed conductivity equivalent is 2.79 times. The carbon dioxide from the reverse osmosis permeate increases the feed conductivity equivalent and this is detrimental for EDI systems in ultrapure water applications. Hence, Liqui-Cel membrane contactors are more economical than the conventional degasifier for removal of carbon dioxide.

Chemical Treatment

Chemical treatment is widely used to control dissolved oxygen in a boiler. The cost of operating a chemical treatment programme consists of chemical costs and blowdown costs. Periodically the water in the boiler must be flushed out to remove non-volatile compounds. They are flushed out of the boiler in a process called blowdown. Chemical addition to the water can increase the frequency of blowdown, which increases the operating cost of the boiler.

There are two components of blowdown costs. Water and steam that is purged from the boiler during blowdown is sent to drain. This water must be replenished by fresh makeup water and there is a cost associated with it. The second cost is heat or energy cost. The water blow down from the boiler is hot. It is replaced with cold water that must be reheated in order to produce steam.

Liqui-Cel membrane contactors are widely used to remove dissolved oxygen in feed water. By incorporating membrane contactor there is substantial savings in boiler blowdown rate and cost, chemical

Mukesh C KhagramDirectorEvergreen Technologies Pvt [email protected]

Pinakin J SampatTechnical Adviser and ConsultantEvergreen Technologies Pvt Ltd

Innovative Membrane.indd 15 16-09-2015 10:33:44

Features


Figure 1: Extra-Flow Liqui-Cel Membrane Contactor

dosages and cost are also drastically reduced. This results in substantial savings in operating cost.

Improved Technologies for Boiler Feed Water

Due to several advantages, Liqui-Cel membrane contactors have replaced the conventional forced draft degasifier/deaerator for removal of dissolved gasses such as carbon dioxide and oxygen while the mix-bed ion exchange systems have been replaced by a more efficient Electropure EDI modules.

The most economical scheme for boiler feed water would be:

RO + Membrane Contactor (CO2 removal) + EDI + Membrane Contactor (O2 removal) to Boiler

What Are Membrane Contactors?

Membrane Contactors are typically shell-and-tube device containing micro porous hydrophobic hollow-fibres. The material of construction of hollow-fibres is polypropylene having internal diameter: 200-220 mm, outer diameter: 300 mm and having an average pore size of 0.03 mm. Water is passed on one side of the membrane and a gas is passed on the other. Since the membrane is manufactured using a hydrophobic material and the pores are small, water does not easily pass through the pores. The membrane essentially acts as a support between the gas and liquid phases, and allows them to interface at the pores. Gases, however, freely pass through the pores on a molecular level. (see Figure 1)

Gas Transfer Mechanism (see Figure 2)

• Gasses in the atmosphere dissolve into water until equilibrium is reached.

• Equilibrium between the liquid and gas Phase is offset when a vacuum and/or source of strip gas is applied.

• This creates a driving force to move gasses.

• By changing the partial pressure of the gas we can either remove or dissolve gas into water.

Electropure EDI

What is Electrodeionisation?

Purified water is widely used in

pharmaceutical, semiconductor and power industries.

• EDI is a process to obtain ultrapure water

• Produces water of consistent quality from 1-18.2 mohm-cm resistivity or

• 1-0.057 μS/cm conductivity

• Conforms to USP grade water as Purified Water (PW) and Water For Injection (WFI)

• Replace conventional DI mixed resin bed system

• Continuous process, no shutdown, No regeneration required

• Low energy

Process Of EDI

• Product stream (90% water recovery)

• Concentrate stream (typically 10%)

• Electrolyte stream (10 lph, anolyte + catholyte to drain)

The electrodeionisation process uses a combination of ion-selective membranes and ion-exchange resins sandwiched between two electrodes anode (+) and cathode (-) under a DC voltage potential to remove ions from RO pretreated water.

Ion-selective membranes operate using the same principle and materials as ion-exchange resins, and they are used to transport specific ions away from their counter ions. Anion-selective membrane are permeable to anions but not to cations; cation-selective membranes are permeable to cations but not to anions. The membranes are not water-permeable.

By spacing alternating layers of anion-and cation-selective membranes within a

plate-and-frame module, a ‘stack’ of parallel purifying and concentrating compartments are created. The ion-selective membranes are fixed to an inert polymer frame, which is filled with mixed ion-exchange resins to form the purifying chambers. The screens between the purifying chambers form the concentrating chambers.

This basic repeating element of the EDI is called a ‘cell-pair’. The ‘stack’ of cell-pair is positioned between the two electrodes, which supply the DC potential to the module. The influence of the applied DC voltage potential, ions are transported across the membranes from the purifying chambers into the concentrating chambers, it becomes free of ions. This stream is the pure water product.

In the concentrate stream, electrical neutrality is maintained. All the streams from the concentrate chamber are combined to form a concentrate header and the concentrate stream outlet is led to drain. The electrolyte stream flow pass the anode and cathode sequentially. Figure 2: Gas Transfer Mechanism

Cartridge

Distribution Tube Hollow Fiber

Membrane BaffleCollection

Tube Housing

Strip Gas

Aqueous

Stream


Features


Table 1: Features and Benefits of Membrane Contactor

Table 2: Various Grades of Pure Water

Electrolyte waste stream expels the unwanted chlorine, oxygen and hydrogen gas from the respective electrodes.

Advantages of EDI over Conventional Deionization System

• Consistent quality from 1-18.2 Mohm-cm resistivity or 1-0.057 μS/cm conductivity.

• Continuous process, no shutdown, No regeneration required

• Low energy

• Economic use of capital

Pure Water Grades and Applications

There are many grades of pure water available as defined by various standards. Each grade of pure water is used in a number of applications listed in Table 2.

Pure Water Quality Classification

It is important to be quite specific about the definition of ‘high purity’ water as often the term is used to describe the range of

pure water specifications. Refer Table 3 for pure water quality classification.

Feed Water Quality to EDI

There are several manufacturers across

the globe with different configuration and specifications of EDI module. Each manufacturer specifies the feed water quality entering EDI both recommended for optimum performance and maximum limit, and other operating parameters such as operating and maximum feed pressure, voltage and current drawn. EDI process is always RO fed water. Feed water quality entering EDI module is different for different grades pure water, eg, the treated water quality for USP grade water is 1.3 μS/cm, for high pressure boiler, power system it is 0.1 μS/cm and for microelectronics it is 0.057 μS/cm. The lower the ions fed to EDI, the better is the quality. Hence, feed water quality entering EDI for high pressure boiler, power system will be more stringent than for USP grade systems.

Feed Conductivity Equivalent and Performance of EDI

The performance of EDI is affected by the presence of carbon dioxide and silica in the feed water. The pH of RO permeate is around 5.6 with generation of gaseous carbon dioxide from bicarbonate alkalinity in raw water.

Feed water conductivity does not show a complete picture of the total ionic load in RO permeate. Conductivity measurement devices do not detect the full amount of weakly ionised species like carbon dioxide and silica. Both carbon dioxide and silica have weak anionic charge under normal operation and pH. Due to formation of carbonic (H2CO3) and silica acid (H2 SiO3)

Figure 3: Process Of EDI

Features Benefits

Small size —10x the surface area of conventional degasifiers

– Compact skids can fit inside of existing buildings

– Lower installation costs

Modular like other water treatment components

– Can be easily expanded

– Allows for redundancy with multiple contactors

Total gas control – O2, CO2, and N2 control with one device

Cleanliness – Quick to rinse

High inlet pressures – Can eliminate or reduce the number of transfer pumps required

Performance can be accurately modelled

– Quick sizing estimates

– Guarantee outlet of < 1 ppb for O2, < 1 ppm for CO2

Does not require chemicals to operate – Environmentally friendly and safe for employees

Type of water Applications

• Deionised water Medium pressure boiler feed, renal dialysis make-up, battery top-up

• Purified Water Pharmaceuticals, cosmetics, chemical manufacturing

• Apyrogenic Water Vial washing, tissue culture, water for injections

• High Purity Water High pressure boilers, combined heat and power systems, laboratories

• Ultrapure water Micro electronics, supercritical boilers

Header

CaMgNaClSO4NO3SiO3CO2

Pout

Cout

EoutEout

How EDI Works

Cath

ode A

node

FEED TO EDI: RO Permeate FCE : < 9 μS/cm

Ein EinCin Fin Cin

C- A- C+

Ca++Cl-

SO4-

NO3-

SiO2-

Mg++

Na+

A- C+

A+

Operation Mechanism:

• Voltage is driving force• Ions split due to Current• Cations to Cathode• Anions to anode• Ions recombine in Concentrate• Pure water Out• Operates at Steady StateF: Feed StreamP: Permeate StreamC: Concentrate StreamE: Electrolyte Stream


Features


they are weakly adsorbed by the resins and the applied voltage has little driving force. High levels of carbon dioxide will increase the working section of the module and the polishing section decrease. For better EDI performance, the polishing section has to be large which will aid the removal of different ions such as carbon dioxide and silica.

EDI systems are therefore designed based on feed conductivity equivalent (FCE) value.

Calculations for Feed Conductivity Equivalent (FCE):

FCE = Feed conductivity (μS/cm) + 2.79 (CO2) ppm + 1.94 (SiO2) ppm

For Example:

Feed conductivity : 5 μS/cm

Carbon dioxide : 4 ppm

Reactive silica : 0.5 ppm

FCE = Feed conductivity (μS/cm) + 2.79 (CO2) + 1.94 (SiO2)

= 5 + 2.79 (4) + 1.94 (0.5)

= 5 + 11.16 + 0.97

= 17.13 μS/cm

FCE is in the working range (< 33 μmS/cm) but outside optimum range (< 9 μmS/cm). Hence, it is important to reduce the carbon dioxide and silica content entering into the EDI unit.

Removal Of CO2 In RO Permeate:

Carbon dioxide in RO permeate is removed by the following methods

• Caustic dosing in the pretreatment to RO so that RO permeate is around 7.0. At pH 7.0 the carbon dioxide level is approximately 1-2 ppm.

• Degasification using Liqui-cel membrane contactors. They are basically hydrophobic hollow fine fiber

membranes and are installed in the RO permeate outlet. The carbon dioxide is brought down to 1-2 ppm.

Final Treated Water Quality from EDI:

The final treated water quality from EDI will vary between 1-18.2 mega-ohms-cm resistivity.

The quality from EDI Module depends upon several factors as follows:

• System design and engineering of ultrapure water system.

• Designing the system at optimum/maximum feed water limiting conditions to EDI. The lower the feed quality to EDI, the better is the output quality.

• Proper instrumentation and controls.

• Removal of all constituents such as hardness, iron, particulate matter, carbon dioxide, organics, and oxidising agents.

• Pressure drop across system.

• Proper operation and maintenance of RO And EDI system.

• Pure DC power supply.

There is always a trade-off in designing RO/EDI systems whether to design RO with a single pass with high feed quality (greater than optimum level) in which case EDI performance gets affected or double pass RO which will increase system cost but will give consistent and satisfactory performance of EDI.

Applications

EDI produces treated water quality conforming to the following applications:

Pharmaceutical industries; Automobile industries; Power stations; Boiler feed water; Process industries; Laboratories for process water; etc.

Power Consumption

A typical EDI module operating at 2 m3/hr will require 300 V DC and draws 2 Amps. The Power Consumption can be calculated as follows:

DC Power (Watts) = Voltage (V DC) x

Current (Amps)

= 300 V DC x 2.0 Amps.

= 600 W

There is some power loss at the power supply during the conversion from AC to DC. Assuming power supply efficiency is typical 85% (15% losses)

AC Power = DC Power

0.85

= 600 W x 1k W = 0.7 kW

0.85 1000 W

Energy kWh = AC Power x Time

(kW) x 24 Hrs.

= 0.7 kW x 24 Hrs. = 16.8 kWh

Power cost/m3 of = 0.7 kW

treated water 2m3

= 0.35 kW/m3

Conclusion

Meeting the water specifications of boiler feed water is a challenging task. The unique properties of Membrane Contactors and Electropure EDI modules allow them to be installed in almost any location in high purity water system. Membrane contactors can deliver 1 ppb of dissolved oxygen and 1 ppm carbon dioxide while EDI module can produce up to 18.2 Mega-ohms-cm resistivity water. Other benefits include redundancy, system stability and versatility which allow the end user to incorporate these well-established technologies. ◘

Pure water type

Conductivity μS/cm at 25oC

Maximum Micro

Organisms CFU/ml

Maximum Total Dissolved Solid

(TDS) mg/l

Pyrogens (Endotoxins)

EU/ml

Reactive Silica μg/l as SiO2

Total Organic Carbon (TOC)

mg/l as C

Deionised 20.0 not specified 10 not specified 500 not specified

Purified 1.3 100 1 not specified 100 <0.5

Apyrogenic 1.3 0.1 1 0.25 100 0.05 – 0.07

High Purity 0.10 1 0.5 not specified 20 not specified

Ultrapure 0.057 1 0.005 not specified 2 0.05

Table 3: Pure water quality classification


Features


Enhanced Biosolids TreatmentWith a number of projects being implemented such as the Namami Gange, plans of Smart Cities and pressures of increasing urbanisation makes waste water infrastructure of utmost importance. In this article, John Tattersall, Global Director – Water Technology, Black & Veatch and Rajesh Patwardhan, Director Business Development, Black & Veatch Water, India share insights on incorporating enhanced biosolids treatment in these projects and the benefits.

I ndia is set to make significant investments in waste water treatment infrastructure. For example, in the

first phase of plans to restore Ganga, 118 towns have been tentatively identified for the provision of new waste water treatment works. Efficient management of waste water is also among the attributes the Smart Cities Mission requires for the proposed smart cities project. In addition to the many new-build projects envisaged in Namami Gange and the smart cities programme, many towns and cities are seeking to improve the performance of existing wastewater treatment assets to cope with the pressures of increasing urbanisation.

Incorporating enhanced digestion processes into both new and retrofit waste water treatment infrastructure projects offers potential benefits: increased capacity of existing works, a byproduct safe for use as fertiliser, and the possibility for energy recovery. The latter attribute can support the element of the Ministry of Urban Development’s Draft Concept Note on the 100 Smart Cities which calls to, ‘adopt new methods for loss and energy consumption in water networks.’

One advanced digestion technology that is fast gaining global acceptance is thermal hydrolysis.

Thermal hydrolysis is a high-pressure process that typically heats Waste Active Sludge (WAS) or a combination of WAS plus primary sludge for a short period of time to high temperature and pressure. The high temperature and the rapid decrease in pressure during depressurisation ruptures cells in the WAS and break down extracellular

polymer, making more material bio-available for anaerobic digestion. This makes the sludge more digestible for microbes which results in significant improvements in digester loading and performance, opening up possibilities for improved energy and resource recovery from biosolids. The benefits are summarised in Table 1.

Thermal Hydrolysis Process (THP) technology was commercially developed by Cambi approximately 20 years ago, but Veolia, TurboTec and others also offer THP systems.

In the Cambi process sludge is fed to a pre-heating vessel, the pulper, at a concentration of 16.5 per cent dry solids and is heated using steam recovered from the flash tank. Pre-heated sludge is fed to one of the reactors, heated via steam injection to 165 Degree C, and held for 20 to 30 minutes. In addition to providing the required retention time for hydrolysis, the process meets the time-temperature criterion for US Class A Biosolids, having very low levels of pathogens.

Following the reaction period, sludge from the reactor is discharged to the flash tank. During discharge to the flash tank, the sludge is rapidly depressurised. This causes cell rupture and release of flash steam, which is recovered to the pulper. From the flash tank, hydrolysed sludge is fed continuously to anaerobic digestion via a cooling system which is required to reduce the sludge temperature from approximately 100 Degree C or higher to the 40 Degree C required for digestion.

The most common current configuration for THP is to use it upstream of anaerobic digestion although it can be used in other configurations.

Rajesh PatwardhanDirector – Business DevelopmentBlack & Veatch Water, India

John TattersallGlobal Director – Water TechnologyBlack & Veatch

Enhanced Biosolids.indd 19 16-09-2015 11:19:43

Features


A thermal hydrolysis and digestion facility at United Utilities’ waste water treatment works in Davyhulme, Manchester, England has increased the site’s biosolids processing capability from 39,000 tonnes dry solids (tDS) per year to a maximum capacity of 121,000 tDS per year (with an average of 91,000 tDS per year). The new plant provides United Utilities with a central biosolids processing facility and allows for import of dewatered biosolids cake from seven satellite sites which previously used lime treatment.

The increase in capacity means that Davyhulme is now capable of processing biosolids equivalent to a population of approximately 4.4 million people. The Engineering, Procurement, Construction (EPC) contract was undertaken by Black & Veatch.

The THP at Davyhulme processes biosolids via two routes:

• Liquid biosolids from Davyhulme treatment works is dewatered on site to approximately 25 per cent dry solids using 4 decanter centrifuges and fed to a storage silo which feeds the THP

• Imported cake is brought into site from the seven satellite sites via two

cake reception facilities. The sludge is fed to the THP from two sludge storage silos

There are 4 thermal hydrolysis streams feeding 8 digesters (2 digesters per stream). Each THP stream can be fed with dewatered biosolids from Davyhulme, imported biosolids or a combination of the two. Prior to being fed to the digesters, sludge is cooled to approximately 40 Degree C.

Biosolids displaced from the digesters flow by gravity into a degassing tank where air is injected to inhibit methanogenesis. From the degassing tank, sludge is transferred to digested sludge storage tanks.

Bio-gas from the digesters is balanced using two 9,000 cubic metre (m3) double membrane gas holders. The gas is pumped via a gas clean-up system to feed 5 combined heat and power (CHP) engines and 3 combination boilers. The combination boilers are capable of raising steam for the THP using a combination of exhaust waste heat (from the CHP engines) and bio-gas burned in the fired section of each boiler.

Heat is recovered from the CHP engine jacket cooling systems and is used to pre-heat final effluent dilution water used to dilute sludge cake being fed to the THP and boiler feed water. Electricity is generated from the CHP engines making the site energy self-sufficient.

Another advanced digestion option is the HPH process which has recently been added to the Colchester Waste Water Recycling Centre (WRC). Owned and maintained by Anglian Water, Colchester, WRC treats flows from 135,000 homes and businesses in and

Consideration Typical Improvement Achieved

Digester loading rate More than double the digester loading rate for conventional digestion.

Bio-gas production 25 to 30% additional bio-gas.

Overall energy production Site specific, but generally the additional energy required for steam is offset by energy recovered from increased bio-gas production

Volatile Solids Destruction (VSR) 60% VSR compared to around 45 to 50% VSR with conventional digestion.

Dewaterability Dependent on application a 30% dry solids in cake dewatered using centrifuges or belt filter presses (compared to around 23 to 25% dry solids for conventionally digested sludge)

Reduction in wet cake load out Up to 25 or 30% reduction in wet sludge volume for disposal (resulting from a combination of the additional VSR and the improved dewaterability).

Biosolids product Meets requirements for Class A biosolids under the time-temperature criterion.

Table 1

Figure 1: The HPH facility at Colchester WRC with – from left to right - heating, pasteurisation and hydrolysis tanks


Features


around Colchester, Essex, England. The existing WRC comprised a conventional digestion process and served as a sludge reception facility for liquid and cake imports from other Anglian Water satellite sites.

The facility was recently upgraded as an enhanced digestion treatment centre with capacity for 14,526 tDS per annum. The facility’s increased capacity provides for all indigenous sludges from the works, expanded liquid sludge imports and a new cake import processing capability. The various sludges are blended, pasteurised, digested and finally dewatered to cake, ready for transportation off-site for use as an enhanced quality agricultural product.

As principal EPC partner, Black & Veatch was selected to design and manage construction of the new treatment process. The work comprised modifications to the existing primary and imported sludge plant; enhanced tanker imports facility; new Surface Activated Sludge (SAS) treatment; new cake reception facility; Heating, Pasteurisation And Hydrolysis (HpH) process; new digesters and associated bio-gas holder; post digestion dewatering and return liquors treatment facility.

HpH is a unique advanced digestion process, developed, trialled, and

up-scaled to full operational capacity by Anglian Water. The three-stage system performs the following functions:

• pre-heats the blended feed sludges prior to pasteurisation

• pasteurises the sludge and achieve an ‘enhanced’ sludge product and rapid pathogen kill

• pre-conditions (hydrolyses) the digester feedstock for optimum bio-gas production

Colchester’s HpH is in full operation and on target to treat 14,526 tDS per annum. The system comprises four reactors: 1 for pre-heating, followed by 2 for pasteurisation and 1 for hydrolysis. The system operates an automated batching arrangement centring on the two (280 m3 each) pasteurisation tanks. Whilst one pasteurisation tank is filling and heating, the other is holding at temperature and pasteurising its batch for at least five hours. After its holding period the batch is fed forward to the (1,115 m3) hydrolysis tank and the cycle is repeated.

The initial pre-heating stage utilises a circulating hot water loop (80 Degree C) fed from the heat recovery systems of 2 CHP engines. Additional heat is added as required from 2 steam boilers which also utilise heat recovery from the CHP engines’ flue gases to create steam used by the process.

The pre-heating process raises the sludge temperature to 42 Degree C at which time it is ready to feed the pasteurisation stage. This stage utilises direct steam injection to raise its temperature to 57 Degree C. The hot water and steam systems are designed to harvest all heating needs from the CHP power generation process. If the CHP is out of service the boilers may be fuelled by burning surplus biogas, or if necessary, by diesel oil from the new storage tank.

Following the pasteurisation stage the batch is discharged to the hydrolysis tank. The sludge is then transferred via a heat exchanger where final effluent is used to cool the flow to less than 38 Degree C ahead of being slowly pumped forward to the digesters.

Two new mesophilic anaerobic digesters, with a working volume of 3,802 m3 each, receive the HpH treated sludge and hold it for a minimum period of 14 days.

Bio-gas evolved from the digestion process is passed from the digesters to an existing (1,500 m3) gas holder which feeds the site’s CHP engines. The aim of the CHP installation is to provide power generated by bio-gas from the enhanced digestion process. Two CHP engines rated at 1.2 MW each, provide sufficient power and heat to run the treatment process, but also allow the site to export surplus power to the grid. All power generated by this process is subject to ROC accreditation which generates an additional source of revenue. Total output from both engines is 2.4 MW/h; of this approximately 1.3 MW/h is consumed on site with the remainder taken up by the grid. ◘

Figure 2: Constructing the THP at Davyhulme, Manchester, England


Focus


Merino Engg & Infrastructures offers complete range of technologically advanced waste water treatment plants which are set up for the treatment of the water waste that is produced by various companies. Their waste water treatment plants can easily treat both industrial as well as household waste water with ease. Our waste water treatment plants are efficient to provide assessment of various effluent treatment plant and water management systems installed in the industries.

For details contact:Merino Engg & InfrastructuresC-54 Lakhmi Vihar, Jagriti Vihar, Opp: Medical College, Meerut, Uttar Pradesh

Ozone can be utilized to treat wastewater generated from hospitals and the medical community. Due to superior oxidation properties of ozone over conventional treatments and their CD OZONE’s high ozone concentration at over 6% by weight, Faraday Instruments can go after these complex waste streams with very good results.

For details contact:

Faraday Instruments106/4A, Revenue Nagar, SaravanampattiCoimbatore, Tamil Nadu 641 035 E-mail: [email protected] [email protected]

Sri Kamakshi Traders offers range of waste water treatment plants fabricated at par with the set industry norms at their state-of-the-art manufacturing unit. Extensively used to purify the waste water and removing

dissolved impurities from it, these plants are used across various industrial units and sectors.


Sri Kamakshi TradersH R Complex, New No: 939, Old No: 482, P H RoadNr Panchaliamman Koil, Arumbakkam, Chennai 600 106Tel: 044-23636945, 42640934, 23636446Fax: 91-044-44556331

Panse Consultants offers wide range of waste and waste water treatment. The company has set new benchmarks in the field of offering fine quality waste and waste water treatment such as solid waste management, effluent

treatment plants troubleshooting, sewage treatment plant, hazardous waste management, etc.


Panse Consultants F No: 301, D Wing, Spring Meadows, Pune SataraTunnel Road, Ambegaon, Pune, Maharashtra 411 046Tel: 020-25397371E-mail: [email protected]

Pollucon Enviro Engineers Pvt Ltd offers an entire gamut of waste water treatment plants in treatment of waste water generated from different types of industries. The anaerobic digester tanks of these industries comprises of vast

population of anaerobic bacteria that take significant amount of time to establish themselves in order to get fully effective. For this purpose, the company maintains a common practice to separate the anaerobic microorganisms from materials having them.


Pollucon Enviro Engineers Pvt Ltd 701-C Royal Garden, Carter Road No: 2Borivli (E), Mumbai 400 066

WASTE & WASTE WATER TREATMENT WASTE WATER TREATMENT

or Circle Readers’ Service Card 1 or Circle Readers’ Service Card 2

WASTE WATER TREATMENT PLANTS SEWAGE WASTE WATER TREATMENT


or Circle Readers’ Service Card 5

WASTE WATER TREATMENT

Focus Products I.indd 22 16-09-2015 10:36:47

Focus


United Stars Enviro Technologies Pvt Ltd offers sewage water treatment plants, which are widely appreciated for its optimum performance and reliable service life. The company ensures that the plants offered meets the purpose.


United Stars Enviro Technologies Pvt LtdStars House, Survey No: 222/1, Site No: 15Sri Chitanya Layout, B/h Festo Company, Hosur NH Road Bommasandra Indl Area, BommasandraBengaluru, Karnataka 560 099

Enhance Enviro Solution offers gamut of waste water treatment plant using optimal quality material and ultra modern equipment. Their water treatment plants are meticulously inspected by their proficient professionals.


Enhance Enviro SolutionVilla No: 53, Basement No: 2, Block No: 3, Eros GardenSurajkund, Charmwood Village, Faridabad, Haryana 121 009Tel: 0129-4311010

WASTE WATER TREATMENT PLANT SEWAGE WATER TREATMENT PLANTS


The effluent after primary treatment will be subjected to secondary treatment. The major goal of this treatment is to remove soluble organic pollutants by oxidation and settling. This involves bringing the active microbes in contact with waste water which consume the impurities as food. These organisms, in presence of oxygen, convert the biodegradable organic matter into carbon dioxide water, more cell material and other inert products. With the help of this the total BOD reduction will be 90-95%.


V M Services 4/13 Uday Park Society, Panchvati Gorwa, Vadodara, Gujarat 390 016Tel: 0265-3266115

EFFLUENT WATER TREATMENT


United Stars Enviro Technologies Pvt Ltd offers state-of-the-art technology for waste water treatment systems strictly conforming to the international pollution control norms as well as CPCV norms and follow strict criterion for biological treatment selection. Their services are planned and executed by the experts in complete compliance with the industrial specifications that makes them highly reliable.

USETPL can custom design complete integrated water treatment systems based on the specifications of the client. Applications include brackish and surface water treatment systems and seawater desalination for industrial or commercial water uses. Other systems include reverse osmosis, membranes, water softener systems, membrane nano filtration and ultra-filtration systems.

USETPL line ranges from basic water softeners to custom designed water treatment systems that solve a number of water treatment quality issues.


United Stars Enviro Technologies Pvt LtdStars House, Survey No: 222/1, Site No, 15, Sri Chitanya LayoutB/h Festo Co, Hosur NH Road, Bommasandra Indl Area, BommasandraBengaluru, Karnataka 560 099Tel: 080-49472536

WASTE WATER TREATMENT SYSTEMS



Focus


Raveena Watertech offers industrial waste water treatment. Industrial waste water has different impurities, owing to which its treatment becomes a challenging task. In addition to this, the emission limits for industrial wastes are gradually becoming a priority among the production companies.

The activated sludge process of their high-performance BIOPUR systems prove highly effective in purifying water to a great extent. In the case of optimum cleaning requirements, Raveena Watertech employ membrane processes with submerged or external membranes. The systems provided are suitable for saving liquid resources and practically zero discharge of waste water. The company also make use of aerobic biological processes, anaerobic biological processes and chemical-physical processes.

In addition to this, Raveena Watertech provide effluent treatment concepts in a variety of industrial branches like aerobic and anaerobic systems for food processing; membrane bioreactor systems for the chemical industry; and waste water reuse schemes for diverse branches.


Raveena WatertechG-5 Neha Indl Estate, Opp: Tata SSL, Dattapada Road, Borivli (E), Mumbai 400 066

INDUSTRIAL WASTE WATER TREATMENT


Reverse Osmosis System provides economical way to obtain pure water from brackish water. In reverse osmosis, the membrane technology, removed most of the dissolved impurities, organic and toxic heavy metal ions, bacteria and viruses. Product features salt rejection up to 98% depending upon feed water composition. automatic feed shut-off valve on request. Full control panel instrumentation on request. Product recovery ranges from 40 to 70% depending upon fed water composition. Automatic shut-down system for protection of membranes. Skid mounted, fully assembled.


Aqua Cool Co Pvt LtdShivam Bldg, Gopi Tank Road, Rao Wadi, Nr Union Bank, Matunga (W), Mumbai 400 016Tel: 022-32255565



Aguapuro offers waste water treatment plants of various capacity that includes packaged type or custom made type designs. Sewage treatment or domestic waste water treatment is the process of removing contaminants from waste water and household sewage, both runoff (effluents) and domestic. It includes physical, chemical, biological and tertiary processes to remove physical, chemical and biological con-taminants. Its objective is to produce a waste stream (or treated effluent) and a solid waste or sludge suitable for discharge or reuse back into the environment. Aguapuro offers aerobic system with different aeration options like extended aeration system, moving bed bioreactor (MBBR), Submerged Aerated Fixed Film (SAFF), Membrane Bioreactor (MBR) and anaerobic system with up-flow anaerobic digester. Systems are available for smaller effluent quantities as well as for larger effluent volumes up to 1,000 m3/day.


Aguapuro Equipments Pvt Ltd416/417 Jogani Indl Complex, Bldg No: 9, V N Purav Road, Chunabhatti, Mumbai 400 022Tel: 022-24052813, 24052814, 24052816E-mail: [email protected] / [email protected] / [email protected]

WASTE WATER TREATMENT PLANTS



Focus


Ved Engg Works offers air pollution control. These products are developed from optimum-quality basic material that is sourced from reputed vendors of the market, in conformity with global policies. In order to ensure supreme quality, these products are methodically analyzed on various pre-defined quality constraints.


Ved Engg WorksDhadoli Road, Adampur Mandi, Haryana 125 052

AIR POLLUTION CONTROL


BiOWiSH technology creates a powerful composite biocatalyst from a unique blend of micro-organisms, enzymes and co-factors. Manufactured using a highly refined and proprietary fermentation process, this composite biocatalyst co-exists with existing waste water biology to enhance their rate of reaction, resulting in a more efficient biological treatment process. The technology fits into a relatively new scientific field called bio-augmentation that presents a simple and cost-effective way to solve waste water treatment problems without expensive capital enhancements.

Unique to BiOWiSH technology is the ability to reduce the required time for bacteria to adapt to new waste streams. BiOWiSH technology enables a rapid biological response to load and flow variation, a key differentiator to conventional bioaugmentation which rely on product formulations specific to a waste stream. These products require more time to implement and can be rendered ineffective if the substrate changes.

Additionally, traditional chemical methods are only effective on the insoluble component of Biological Oxygen Demand (BOD). It is often necessary to feed hazardous and costly chemicals such as hydrogen peroxide to reduce soluble BOD. BiOWiSH technology treats both the soluble and insoluble portions of BOD, reduces polymer usage and hauling fees, and eliminates the health and safety risks of handling dangerous chemicals. The BiOWiSH family of environmental products works within existing treatment systems and public waterways, requiring no capital or significant equipment expense. BiOWiSH technology works best in rudimentary treatment systems and open waste canals with existing biology and a minimum six hours of hydraulic retention time.


New Earth Bio Remedies Pvt Ltdc/o Pugmarks, U 9, 1st Flr, Green Park Extn, Delhi 110 016

MUNICIPAL WASTE WATER TREATMENT


United Stars Enviro Technologies Pvt Ltd offers unique water recycling plants for vehicle washing. The system is incorporated with integrated treatment system for efficient removal of oil, fuel, filterable solids, readily settable solids and other contamination from water. Their water recycling plant is highly applicable for removing the harmful bacteria and other pathogens out of the water. Water is a precious resource which though is available in plenty but to get drinkable water is always a challenge. Their range of water treatment plants are capable of offering the purest water.


United Stars Enviro Technologies Pvt LtdStars House, Survey No: 222/1, Site No: 15, Sri Chitanya Layout, B/h Festo CoHosur NH Road, Bommasandra Indl Area, Bommasandra, Bengaluru, Karnataka 560 099

WATER RECYCLING PLANTS



Focus


Quality Tech Industries offers high quality vent filter air pollution control using optimum grade material that is sourced from authentic vendors in the market. Their offered device is used for controlling air pollution in differ-ent industrial and commercial places.


Quality Tech IndustriesPlot No: 04, Gat No: 72, Jyotiba Nagar, Talawade, Pune, Maharashtra 412 114

VENT FILTER AIR POLLUTION CONTROL


Ideal Industries offers wide range of air pollution control equipment. These equipment can easily handle all kinds of air pollutions from every unit of the industry. They are compact in size and available in various technical specifications.


Ideal IndustriesMoni Villa, Nandan, Satpala, Post Agashi, Tal: Vasai (W) Virar, Maharashtra 401 301Tel: 0250-2588250, 6939115

AIR POLLUTION CONTROL EQUIPMENT


Bansal Sweet Water Technology offers waste water treatment plant for ensuring high water production rate in various industries using sophisticated technology at par with the current market evolution.


Bansal Sweet Water TechnologyUnit C-42/43, A K Indl Estate, Parmar Techno Vasai PhataNH-8, Village Pelar, Vasai (E)Thane, Maharashtra 401 208Tel: 0250-6594999

WASTE WATER TREATMENT PLANT


Era Hydro-Biotech Energy Pvt Ltd offers quality assured waste water treatment plants using high-grade raw material. These plants help in water conservation.


Era Hydro-Biotech Energy Pvt LtdRow House No: 2, Shree Leela Plaza, Adjacent To HDFC, Opp: KFC, Baner-Balewadi RoadPune, Maharashtra 411 045Tel: 020-25887303, Fax: 91-020-25882352E-mail: [email protected] / [email protected] / [email protected]

WASTE WATER TREATMENT PLANTS



Focus


Promoters Of Environmental Technologies & Energy Resources offers activated sludge process, re-activated sludge process, anaerobic systems, aerobic systems, recycle systems, waste water treatment. This can be used as process water, thus it creates a zero pollution atmosphere and is eco-friendly. The quality obtained also conforms to the standards of the Pollution Control Board.

Their sewage treatment plants are adequate to meet requirements of diversified sectors like residential complexes, hospitals, schools and institutions, hotels and resorts.

The company also supply the accessories for waste water treatment plant like bio fill media, tube settler, diffusers, sludge pump, filter press and air blower.


Promoters Of Environmental Technologies & Energy Resources16-A, III Main Road, Narayanasamy Garden, Kodungaiyur, Chennai 600 118 Tel: 044-25550423



There are two basic approaches: to use the waste in the water as a resource (such as constructed wetlands) or strictly as pollution (such as the majority of today’s treatment plants). Most waste water is treated in industrial-scale energy intensive waste water treatment plants (WWTPs) which include physical, chemical and biological treatment processes. However, the use of septic tanks and other On-Site Sewage Facilities (OSSF) is widespread in rural areas, serving up to one quarter of the homes in the U.S.[2] The most important aerobic treatment system is the activated sludge process, based on the maintenance and recirculation of a complex biomass composed by micro-organisms able to absorb and adsorb the organic matter carried in the waste water.


Acacia Power Systems58 Nachi Konar Street, Giri Nagar, Kavundampalayam,, Coimbatore, Tamil Nadu 641 030Tel: 0422-2403402



Akshaya Enterprises specializes in effluent treatment plants. The company has a full-fledged R&D center where their engineers work on new product design, development, as well as upgradation of existing ones and indigenization

of foreign technologies obtained through collaborations. Canadian Clear is the company, which provides a complete solution for effluent treatment, recycling and zero discharge.


Akshaya Enterprises19/83 Asokar Street, Surya Nagar, Vaikkalpalam, VellaloreCoimbatore, Tamil Nadu 641 111 Tel: 0422-2410272E-mail: [email protected]



Backed by highly advanced set of machinery and resources, Raj Water Technology (Guj) Pvt Ltd offer reliable range of waste water treatment plant. The use of high grade authentic components ensure

the paramount quality standards. The company ensures that these water plants are thoroughly tested on international industrial standards before being offered to the clients.


Raj Water Technology (Guj) Pvt LtdPlot No: 27, Survey No: 47, Jivraj IndlArea, Opp: Falcon Pump Vavdi, Gondal Road, Rajkot, Gujarat 360 004Tel: 0281-3291791, 2922777, Fax: 91-0281-2922481E-mail: [email protected] / [email protected]




Focus


Krishna Water & Chemical Services offers membrane-nased water and waste water treatment plant for varied industries. The purification is done at different levels and successfully removes suspended solids and other impurities. The company strictly conform to the international pollution control norms as well as CPCV norms and follow strict criterion for biological treatment selection. Used for treating the waste water generated from various industries, these plants carry out purification using chemical and biological process.


Krishna Water & Chemical ServicesPlot No: 44, Aashirwad Township-1, Gate No: 1, Opp: Bamroli Telephone ExchangeBamroli-Pandesera Road, Udhna, Surat, Gujarat 394 210Tel: 0261-6595151, Fax: 91-0261-2399988

MEMBRANE-BASED WATER & WASTE WATER TREATMENT PLANT


Water and waste water treatment by means of water and waste water treatment products serves to industrial, institutions, homes and communities, using various technology like media filter, micron filters ultra and reverse osmosis membrane and resin treatment to meet customers requirement and expectations. The products offered are filters, micron filters, water softeners, ultra filtration, reverse osmosis, demineraliser plant, EDI and other physico-chemical treatment like clarifiers, sewage treatment plant, industrial waste water treatment and recycle.


Utilco Engg Pvt Ltd103/104 Jay Vijay Nagari-II, Opp: Riddhivinayak Hospital, Nalasopara (W), Mumbai 401 203Tel: 0250-6068500

WATER & WASTE WATER TREATMENT


Divija Infrastructure Pvt Ltd offers waste water treatment plant. This waste water treatment plant has excellent functionality and is available in both customized as well as standard dimensions.


Divija Infrastructure Pvt Ltd79/12 Sipra Path, Mansarovar, Jaipur, Rajasthan 302 020Fax: 91-0141-2784684



Charul Polymer Products offers waste water filter press using high grade material. They are widely appreciated by their clients situated all over.


Charul Polymer ProductsPlot No: 3235/3236, GIDC, Phase-3, T A Kalol, Chhatral, Gandhinagar, Ahmedabad, Gujarat 382 729Tel: 02764-234014

FILTER PRESS FOR WASTE WATER TREATMENT



Focus


Water Treatment Plant for the production of drinking water is dealt with elsewhere. Many industries have a need to treat water to obtain very high quality water for demanding purposes. Water treatment produces organic and mineral sludges from filtration and sedimentation. Ion exchange using natural or synthetic resins removes calcium, magnesium and carbonate ions from water, replacing them with hydrogen and hydroxyl ions. Regeneration of ion exchange columns with strong acids and alkalis produces a wastewater rich in hardness ions which are readily precipitated out, especially when in mixture with other waste water.


Micro Water Solutions1798 Kotla Mubarakpur, South Extn. Part-1, New Delhi 110 003Tel: 011-41306266

WATER TREATMENT SYSTEM

During the process making coal to coke, water is used in different way. The waste water discharged from these plants are highly contaminated with toxic substances like cyanide (CN), thiocyanate (SCN), ammoniacal nitrogen, phenol, tar and other organic compounds. Removal of this toxic and inhibitory substance is always a challenge in steel industry. Much treatment method in the past has not been able to perform satisfactory to this effluent. Their unconventional approach towards the coke oven waste water treatment is not only able to treat the waste water but the treated water can be reused or discharged without any environmental problems.


Deknomet Systems Pvt Ltd4 & 5, Garden View, Plot No: 66, Sector 19, AiroliNavi Mumbai 400 708

COKE OVEN WASTE WATER TREATMENT



Angel Chemicals offers all-inclusive gamut of waste water treatment plant including ferrous sulphate, colour removal chemicals, alum, ferric chloride, poly electrolyte and hydrated lime. Their offered chemicals are processed using high quality chemical compounds and

progressive techniques in tandem with predefined standards of quality. Besides this, the entire range is stringently inspected on well-defined parameters to assure the remarkable quality and purity of the product.


Angel Chemicals201 Hely Enclave, Nr Dreamland Complex, Pramukh Prasad Chowk, ManjalpurVadodara, Gujarat 390 011

Shreeansh Aqua Solutions offers waste water treatment plant. The use of fine grade ingredients in them makes them useful in the treatment of water. Further,

these water treatments are developed using high quality raw material, certified from the most reliable vendors. The offered products are quality tested to ensure trouble-free operations in treatment.


Shreeansh Aqua Solutions90 Teachers Colony, Govind Garh Dehradun, Uttarakhand 248 001

WASTE WATER TREATMENT PLANT WASTE WATER TREATMENT PLANT



Gen

eral

Pro

duc

ts


Elcom International Pvt Ltd is pioneer in the field of professional grade electro-mechanical/electronic components. Elcom’s range of 22.5 Series pushbuttons, selector switches, illuminated switches and pilot lights in engineering plastic construction have been designed to provide economy of space, aesthetic elegance, self-wiping contacts and sturdiness.

This range has a number of features that make it particularly suitable for safe and highly demanding applications. The circular actuators have chrome-plated metal bezels and are functionally interchangeable on different types of contact elements. The contact elements are double-break and have self-wiping contacts. The elements are interchangeable and can be stacked without additional hardware. 1 to 6 elements (NO and NC) can be used with non-illuminated actuators, whereas 1 to 4 elements (NO and NC) can be used for illuninated actuators. Contact elements and pilot lights are designed to have shrouded terminal with combi-screws.


Elcom International Pvt Ltd20 Prabhadevi Indl Estate, 408 Veer Savarkar Marg, Prabhadevi, Mumbai 400 025Tel: 022-66114444, 24308861E-mail: [email protected] / [email protected]


CONTROL & SIGNALLING DEVICES

Computerised LCRTZ test system (CVCT-S20) is ideal for fast and fool-proof testing of coils and small transformers like SMPS transformers, telecom transformers (hybrid, POT-core, RM-core), pulse transformers, etc. The system scans at one stroke all the windings of the transformer and displays the result as pass/fail. Features programmable test frequency 50-Hz to 10-KHz step; test parameter: inductance L, leakage inductance Lk, turns – ratio Tr, DC resistance DCR, impedance Z and capacitance C, etc. It is built with 20-pin scanner. The test procedure can be pre-programmed and stored under user-friendly menu driven software.


Vasavi ElectronicsNo: 95, 1st Floor, Road No: 7A, Jyothi Colony, Secunderabad, Andhra Pradesh 500 015Tel: 040-27744445E-mail: [email protected]

COMPUTERISED LCRTZ TEST SYSTEM



MGM-VARVEL Power Transmission Pvt Ltd offers helical gearboxes in seven sizes - single, double and triple induction. Power transmission capacity ranges from 0.08 to 22 kW, reduction ratio from 1.49:1 to 3,620:1 and torque from 20 to 2,500 Nm.


MGM-VARVEL Power Transmission Pvt LtdWarehouse No: G3 and G4, Indus Valley’s Logistic Park, Unit 3, Mel Ayanambakkam Vellala Street, Chennai 600 095Tel: 044-64627008, E-mail: [email protected]

HELICAL GEARBOXES

General Products.indd 30 16-09-2015 11:51:13

General Pro

ducts


Hitachi Hi-Rel Power Electronics Pvt Ltd offers powerful and compact SJ700 Series low voltage inverter of 415 V Class from 0.75 kW to 450 kW designed to meet the production and performance needs of OEMs and machine builders, system integrators, panel builders and end-users.Many standard features and capabilities can be augmented with various communications and I/O options.It can be easily configured to meet the requirements of wide range of applications across various industry segments.


Hitachi Hi-Rel Power Electronics Pvt LtdSM 3 & 4, Sanand-II, GIDC Indl Estate, Bol Village, Sanand, Gujarat 382 110Tel: 02717-678777, Fax: 91-02717-678999E-mail: [email protected]

LOW VOLTAGE INVERTER


Goodrive300 Series inverter is a new type of high-performance vector control inverter, and can be widely used for driving asynchronous motors and permanent magnet synchronous motors. The product relies upon a 32-bit DSP and adopts an advanced vector control algorithm to realise a high-performance and high-precision motor control. Improve the product’s reliability and environmental adaptability, at the same time, strengthens user-friendliness and industry-specialized design makes the function more optimised and the application more flexible, and the performance more stable.


Shenzhen INVT Electric Co LtdNo: 4 Bldg Gaofa Scientific Indl Park, Longjing, Nanshan District, Shenzhen, ChinaE-mail: [email protected]

VECTOR CONTROL INVERTER


A large variety of thermocouples and assemblies (Type J, K, R, S and B) are used in virtually all industrial applications. Thermocouples offered have high accuracy, reproducibility and high sensitivity, and confirm to international standards. Thermocouples with outer metallic protection

sheaths grade SS-316, SS-310, SS-446, Inconel-600/800 or ceramic tubes type 610 and 710 or special coatings of Tungsten Carbide or PTFE can be provided depending upon customer’s requirement.


Toshniwal Sensors Pvt LtdE-19/20 Indl Estate, Makhupura, Ajmer, Rajasthan 305 002Tel: 0145-2695536, 2695482, Fax: 91-0145-2695006E-mail: [email protected]

Bettinelli Automation Components Pvt Ltd offers ITP Series high quality indexer packages. Features rotary table plus reducer plus induction motor plus two double phase cams and PNP NO sensors; load capacity is from 20

kg to 1 tonne; standard cycle times from 0.64 to 2.4 seconds; preloaded tapered roller bearings in input and output; central through hole for cables and accessories; etc.


Bettinelli Automation Components Pvt Ltd3 Destination Centre, 1st FloorMagarpatta City, HadapsarPune, Maharashtra 411 013Tel: 020-67236484, Fax: 91-020-67236485E-mail: [email protected]

THERMOCOUPLES INDEXER PACKAGES



Gen

eral

Pro

duc

ts


Core package drilling machine is specially designed to drill holes in print location of cylinder head core package. Operation is done after wash, on ready to mould package. Total 23 drills are made simultaneously in four different planes using pneumatic drilling unit with PLC-controlled operations.


Acme ToolsE-10/11 (2) MIDC Bhosari, Pune, Maharashtra 411 026E-mail: [email protected] / [email protected]

CORE PACKAGE DRILLING MACHINE


Brilliant Process Machinery Pvt Ltd offers SVP/LVP mixing vessel in capacity 20 to 10,000 litres. The complete vessel design is as per ASME Code. Instrumentation and connections comply with BPE and EHEDG guidelines.

It has zero dead leg aseptic designed flush-bottom outlet diaphragm valve. Vessel design and fittings are designed for CIP/SIP. Volume monitoring by load cells, pH conductivity. No stagnant point to avoid bacterial growth. It is polished to high degree of finish and electro-polished to the Ra value of 0.4 and provided with nitrogen purging system and 0.2 u vent filter.


Brilliant Process Machinery Pvt LtdUnit No: 1, 2 & 14, Modern Indl Estate,Opp: IPOLWaliv Phata, Vasai (E), Dist: Palghar, Maharashtra 401 208Tel: 0250-3293636, 2454015, Fax: 91-0250-2454015E-mail: [email protected]

Toshniwal Sensors Pvt Ltd offers large variety of thermocouples and assemblies for use in virtual all industrial applications. The thermocouples offered have high accuracy, reproducibility and high sensitivity, and confirms to international standards.

Many types of accessories to use with RTD and thermocouples are available such as die-cast aluminium heads of all sizes; ceramic sockets and nickel-plated brass terminals; adjustable flanges; SS/nickel-plated brass cable glands; SS/CS plated unions and nipples; drilled bar stock thermowells; bayonet assemblies (straight or angle type).


Toshniwal Sensors Pvt LtdE-19/20 Indl Estate, MakhupuraAjmer, Rajasthan 305 002Tel: 0145-2695536, 2695482, Fax: 91-0145-2695006E-mail: [email protected]

SVP/LVP MIXING VESSEL TEMPERATURE SENSORS


The Omni PDH is a microprocessor-controlled advanced programmable homogenising system that is ideal for research or industrial processing applications. It stores up to 12 programs with multiple speed, time and ramping functions. It has fully programmable time and speed; moveable platform stand; powerful 700 W motor; sample volume processing from <200 uL to 10 L; motor speed from 1,000 to 28,000 rpm and is CE approved. The Omni PDH is compatible with stainless steel.


Inkarp Instruments Pvt Ltd1-2-45/1, Street No: 2, Kakateeya Nagar Colony, Habsiguda, Hyderabad, Andhra Pradesh 500 007Tel: 040-27172293, 27175088, Fax: 91-040-27154686E-mail: [email protected] / [email protected]

OMNI PROGRAMMABLE TISSUE HOMOGENISER (PDH)



General Pro

ducts


Do-it-yourself electronics used to be the domain of the super geeky but over the past few years the concept has really changed. With the invention of the platforms and computers like Arduino and the Raspberry Pi the whole new market culture has changed for better. As it is now more convenient than ever to experiment, learn and build DIY electronics projects. From Arduino and Arduino compatible boards to complete DIY electronic kits, there is something out there for everyone.


Visha World17, 1st Floor, Ganesh Bhavan, 357 Lamington Road, Opp: Lamington Road Police Station, Mumbai 400 007Tel: 022-23862622E-mail: [email protected]

SENSORS & MODULES


The PEM 9004 is stack gas analyser capable of detecting and calculating up to ten gas parameters, housing a lightweight and robust case. An integral sample pump draws the sample through SS-316 probe and gas

treatment system built into the case. The analyser utilises microprocessor-based electronics with backlit LCD display and membrane panel switches to provide easy to view readings and navigation of functions.


Steam Equipments Pvt LtdPlot No: 44, Tiny Co-op Indl Estate, Kondhwa BudrukPune, Maharashtra 411 048Tel: 020-26930908, Fax: 91-020-26930959E-mail: [email protected]

Manual top discharge machines are available with full mouth body open lid, full lip mouth open lid and ¾ lip mouth open lid. The washing and feeding is designed to meet product requirements. The manual top discharge machines

are available from as small as 8” dia to as large as 72” dia. Ace Industries have made as large as 72” dia basket size of their STD Model 180-4 centrifuge machine giving cake load of 1,000 litres/1,200 kg per batch.


Ace Industries (India) Pvt Ltd113 Alpine Indl Estate, Marol Military RoadAndheri (E), Mumbai 400 059Tel: 022-42258000, 29201763, Fax: 91-022-29204939E-mail: [email protected]

PORTABLE EMISSIONS ANALYSER MANUAL TOP DISCHARGE CENTRIFUGE


Safety light curtains are available in hand protection, finger protection and body protection/part of body.Models are available in parallel and cross-beam types from 90-mm height to 1,500-mm height and also as per the customer requirement. Supply of the sensor is 24 V DC and it can be directly connected to PLC. Controllers are available with supply voltage 230 V AC and it is available in wall mounting, panel mounting and DIN rail mounting. These are used on power presses, moulding machines, robots, welding presses, bending machines and many SPMs for operator’s safety while working.


Electronic Switches (India) Pvt LtdPlot No: K-11, MIDC Area, Ambad, Nashik, Maharashtra 422 010Tel: 0253-6697701, 6603954, Fax: 91-0253-2880918E-mail: [email protected]

SAFETY LIGHT CURTAIN



Gen

eral

Pro

duc

ts


Allegro offers an efficient and versatile double cone blender for mixing of dry powders and granules homogenously. The conical shape at both end enables uniform mixing and easy discharge. All contact parts made in SS-304 or SS-316. The cone is statically balanced, which protects the gearbox and motor from any excessive load.

Powder is loaded into the cone through a wide opening and discharged through a butterfly valve. Depending on the characteristic of the product, paddle type baffles can be provided on the shaft for better mixing, uniform blending and de-agglomeration. Dust-free bin charging system ensures minimum material handling. Flame-proof electricals can be provided as optional.


AllegroUnit No: 113, Diamond Indl Estate No: 2, Ketki Pada, Nr Dahisar Toll Naka, Dahisar (E), Mumbai 400 068Tel: 022-40146872, Fax: 91-022-40146874E-mail: [email protected]

DOUBLE CONE BLENDER


With the growing popularity of higher resolution camera in machine vision industry, Tamron realises optics design of ultra-high resolution from center to corner of image thanks to optical design optimised for 2.5 um pixel pitch sensor. 7 fixed focal lens starting from 6-mm to 50-mm for various applications such as machine vision and traffic applicaiton, etc.


Tamron India Pvt Ltd801, 8th Floor, Time Tower, M G Road, Sector 28, Gurgaon, Haryana 122 002Tel: 0124-4116812E-mail: [email protected]

ULTRA-HIGH RESOLUTION LENS


FLOWIRL 8700 is the only Vortex flow meter with integrated pressure (optional) and temperature compensation in 2-wire technology. FLOWIRL 8700 provides accurate measurement of operating, standard volumetric and mass flow of conductive and non-conductive liquids, gases and vapours even with fluctuating pressures and temperatures.

Features 2-wire device with integrated pressure (optional) and temperature compensation; wear-resistant fully welded SS Vortex shedding structure with high corrosion, pressure and temperature resistance; optimum process reliability thanks to Flodoc Intelligent Signal Processing stable readings, free of external disturbances; etc. It finds application in vapour, saturated and superheated steam measurement; steam boiler efficiency monitoring; compressor efficiency monitoring – free air delivery; consumption measurement in compressed air; net heat measurement; etc.


Forbes Marshall Pvt LtdA-34/35, MIDC, Indl Estate, H-Block, Pimpri, Pune, Maharashtra 411 018Tel: 020-27442020, Fax: 91-020-27442040E-mail: [email protected]

VORTEX FLOW METER



General Pro

ducts


Spectralab Instruments offers Automatic Potentiometric Titrator Model AT 38 C, which is specially designed for titration having high accuracy and reproducibility. It also has flexibility, good scope to select right parameters for right applications. It has four basic methods: Anticipatory Speed Dosing (ASD), Fixed End Point Dosing (FED), Step Volume Dosing (SVD) and PH Stat. AT 38 C is an advanced microcontroller-based user-friendly state-of-the-art product design with user-interactive software in dialogue mode for ease of operation with protection against invalid entries. GLP/FDA compliant, compliant to ASTM D664, D2896 and D4739 for TAN and TBN analysis for oil samples. Spectralab AT 38 C is fully automatic titrator for acid base, Redox, Complexometric, Precipitation titrations for simple to complex applications – pH Stat, Enzymes. The titration system can give precise dosing with simultaneous monitoring and control of pH. Small volume vessel, facility to purge nitrogen, smooth stirring can make the system dependable for delicate enzymes. Record of time and volume dosed together with automatic calculations of enzyme activity and graphics for reaction kinetics. Some of the unique features are: single shift key to convert alpha to numeric, storing of last 10 results and corrosion-resistant fibre body housing. This instrument is useful in pharma, bio-chemistry, environmental and water pollutions, chemical industries, dyes and paints, petrochemicals, food and beverages, dairy industries, etc.


Spectralab Instruments Pvt LtdW-446, Rabale MIDC, Navi Mumbai 400 701Tel: 022- 27644030 to 34E-mail: [email protected]

AUTOMATIC POTENTIOMETRIC TITRATOR


IP stands for Ingress Protection rating. The number 6 stands for totally protected against dust infiltration and number 5 for protection against low pressure water jets from any direction. The Bholanath IP-65 motors can be used in all outdoor applications like solar tracking panels, water fountains, outdoor conveyor belts, humid conditions, machines which are exposed to coolants and water, bottle filling machines, liquid dispensing machines, etc. Bholanath IP-65 motors are available in Nema 17, 23, 24 and 86 frame sizes.


Bholanath Precision Engg Pvt LtdUnit No: 11, Kembros Ind Estate, Nr Asian Paint Co, Sonapur Lane, Bhandup (W), Mumbai 400 078Tel: 022-25662856, 67993260E-mail: [email protected] / [email protected]

IP-65 STEPPER MOTORS



Swam Pneumatics Pvt Ltd offers liquid ring compressors in capacity 38,000 m3/hr; vacuum up to 90 per cent; and pressure up to 1.2 bar ‘g’ in single stage.

They are suitable for positive and negative conveying and boosting.


Swam Pneumatics Pvt LtdC-2, Sector 3, Gautam Budh Nagar, Noida, Uttar Pradesh 201 301Tel: 0120-4696222, Fax: 91-0120-1333283, 4696200E-mail: [email protected] / [email protected]

LIQUID RING COMPRESSORS


Gen

eral

Pro

duc

ts


alStrut, the term coined to indicate aluminium struts, offers wide range of profiles with high dimensional precision that can be used for building different types of strucures. Standardisation in the design of the alStrut profiles, supplemented with a wide range of accessories facilitates quick assembly of a variety of structures. The surface of alStrut profiles has been specially anodised to minimise scratches, eleminating the need for surface finishing on completion of assembly.

The terms design for assembly, design for flexibility and design for aesthetics have been integrated into the development of alStrut profiles and accessories.

alStrut is perfect choice not only for machine building, but also for wide range of maintenance and utility requirements.

alStrut helps you build machines and systems of international quality, enabling you to concentrate on your core technical strengths.


alStrut India Pvt Ltd257 Kilpauk Garden Road, Chennai 600 020Tel: 044-26444214, Fax: 91-044-26448847E-mail: [email protected] / [email protected]

ALUMINIUM PROFILE SYSTEM


Minilec (India) Pvt Ltd offers most compact alarm annunciator MBAS 08 with improved windows design and all major features of MBAS 0600 annunciator. Built-in buzzer and pushbuttons are also available.


Minilec (India) Pvt LtdS No: 1073/1-2-3, At Post: Pirangoot, Pune, Maharashtra 412 111Tel: 020-22922162, 22922354, Fax: 91-020-22922134E-mail: [email protected]

ALARM ANNUNCIATORS


Shiv Shakti Process Equipment Pvt Ltd offers agitated Nutsch filter/dryer for various multiple processes like solid liquid separation, agitating/washing, and resuspending/mixing. Extraction, crystallizing, drying can be performed within a closed system in single unit an advantage. It is ideal equipment/system for hazardous/toxic material. All dryer internals, product process area is in SS-316/SS-316L construction, mirror polished.

Heated Limpet coiled/jacket in combination with vacuum atmosphere ensures complete vaporisation of moisture and drying of product. It has PLC-based automation of process batch control, with printable option. Full validation services available including DQ, IQ/QQ, FAT/SAT protocols. cGMP constuction for pharma models. Capacity ranges from 50 litres to 10,000 litres.


Shiv Shakti Process Equipment Pvt Ltd407 Shivam Chambers, Next to Sahara, S V Road, Goregaon (W), Mumbai 400 104Tel: 022-26788480, 26798554, Fax: 91-022-26798284E-mail: [email protected] / [email protected]

AGITATED NUTSCH FILTER/DRYER



General Pro

ducts


Industrial plugs and sockets from Controlwell provide a versatile and robust connection system for industrial field and factory connection applications. These plugs and sockets are designed and manufactured as per IEC 60309-1 and IEC 60309-2 Standards.

The housings of these industrial plugs and sockets are made of Halogen-free, VO Grade polyamide 6 material and hence are non-flammable with a very high impact resistance.

The contacts are made from electroplated copper alloy offering high corrosion resistance and very low contact resistance (<1 mOhm). By virtue of their design these industrial plugs and sockets enable low insertion and extraction forces while maintaining excellent electrical contact.

These plugs and sockets are available in a choice of IP 44 and IP 67 Class of ingress protection ensuring that your connections always get the optimum level of protection.

Availabe in 3, 4 and 5-pin configurations with rated current capacity of up to 125 A these plugs and sockets are the ultimate choice when it comes to powering up absolutely any industrial equipment.


Controlwell India Pvt LtdC-203, Prithvi Park, Plot No: 4, 5 & 6, Sector 30, Sanpada, Navi Mumbai 400 705Tel: 022-27756293, Fax: 91-022-27758767E-mail: [email protected]

INDUSTIRAL PLUGS & SOCKETS


Sharplex Filters (India) Pvt Ltd offers dual vessel cartridge filter units exclusively designed for oil field filtration jobs. The dual cartridge units have a robust offshore proof frame work with lifting facilities, work platform, built-in ladder and safety railing. Safe and easy access to filter vessels allow for quick cartridge replacement.The complete unit is skid-mounted with piping, valve, pressure gauges, which makes it plug-and-play unit ready for operation. The framework is DNV Certified as per DNV 2.7-1. It finds application in completion fluids, water injection, produced water, oily water clean up, pre-filtration RO, etc.


Sharplex Filters (India) Pvt LtdR-664 MIDC, TTC Indl Area, Rabale, Navi Mumbai 400 701Tel: 022-69409850, 69409860, Fax: 91-022-27696325E-mail: [email protected]

DUAL CARTRIDGE FILTER UNITS


Apoyo display board systems with anodized four-side wall of aluminium profile are specially designed. Unlike conventional display boards, this added feature in turn reduces installation problems faced under usual circumstances, making the product unique, acceptable and likeable.


Apoyo Sales Pvt LtdM-80, B-14 New Siyaganj, Indore, Madhya Pradesh 452 007Tel: 0731-4287399E-mail: [email protected]

DISPLAY BOARD



Gen

eral

Pro

duc

ts



Cipriani Harrison’s pressure relief valves are made from forged SS-316L, are highly polished and come standard with FDA EPDM seats and seals. These valves have self-straining machined bodies with a round shape that shows for minimum resistance to flow. The valve body, yoke and actuator are assembled with clamps enabling quick and easy assembly and reassembly. They are available in sizes 1”-3” with sanitary clamp and connections as standard. A manually adjustable spring closing force allows for a desired pressure rating to be set. Once the line pressure reaches this set point the valve plug will hit and the pressure will be relived through the side port(s). These valves are 3A authorised.


Cipriani Harrison Valves Pvt Ltd1901, GIDC, Phase IV, Vithal Udyognagar, Vallabh Vidyanagar, Gujarat 388 121Tel: 02692-235082, 235182, Fax: 91-02692-236385E-mail: [email protected]

PRESSURE RELIEF VALVES

Chemtrols offers combined and split PRDS solution for pressure reduction and de-superheating applications in power plants. The key advantage of combined PRDA is a lower foot-print in the field which leads to tremendous space saving and operational ease. Proven design, long term usage references; ensure complete safety and suitability of their usage in severe applications, backed up by all the necessary mandatory certifications.

It finds application in pressure reduction and de-superheating applications; HP and LP heater bypass valves; feed forward dump PRDS with dump tube; HP/LP turbine bypass valves in power plants needing quick opening/closing functions, typically <2 secs. A good engineered system ensures that steam is not let out to the turbine exhaust, but cooled into the condenser.


Chemtrols Industries LtdAmar Hill, Saki Vihar Road, Powai, Mumbai 400 072Tel: 022-67151200, Fax: 91-022-28571913E-mail: [email protected] / [email protected]

PRESSURE REDUCTION AND DE-SUPERHEATING STATION



Pressure gauges and differential pressure gauges are manufactured in accordance with latest International Standard EN-837.

High quality and precision gauges are manufactured ranging from vacuum 1 kg/cm2 to high pressure application of 3,000 kg/cm2g meeting requirements of various process industries for critical as well as cryogenic applications in onshore and offshore industries.

International certifications such as CE, ATEX and GOST R are available.

For details contact:General Instruments Consortium194/195 Gopi Tank Road, Mahim, Mumbai 400 016Tel: 022-24454387, 24449177, Fax: 91-022-24449123, 24463507E-mail: [email protected]

PRESSURE GAUGES & DIFFERENTIAL PRESSURE GAUGES


General Pro

ducts



Shree Siddhi Vinayak Industries offers quiet in operation air-cooled rugged in construction single-stage rotary vane vacuum pumps in glass-fibre vane material for long life. It is suitable for operating in continuous fluctuating vacuum level at high intake pressure. It has high water vapour tolerance; wire mesh inlet screen and non-return valve to prevent oil entry into the system. Continuous filtration of oil at separate oil reservoir keeps the pump free of contamination. The pump use less than 10 per cent of oil when compared to oil immersed vacuum pump. The system is designed to operate at 80 per cent degree C enhancing moisture and vapour handling capacity.


Shree Siddhi Vinayak IndustriesPlot No: 19 Kashimira Indl Estate, Mira, Dist: Thane, Maharashtra 401 104Telefax: 91-022-28458372, 28457073E-mail: [email protected] / [email protected]

SINGLE-STAGE ROTARY VANE VACUUM PUMPS


Hemraj Enterprises offers SS-316L constructed robust small scale spray dryer in capacity 5-10 kg per hour water evaporation in high purity design as per GMP Standards and in various pharmaceutical grade finishes. Sanitary type ports are standard. It has solvent and aqueous feeds with flameproof design, Uses inert process gas or air as the drying medium and HEPA filters for gas streams.

It is ideal for establishing process data for commercial production and is easy to dismantle for cleaning and fast product switch.

Other additional features includes simple and skid-mounted with rotary atomiser or pressure and two fluid nozzle systems. It is available with auto/manual mode and PLC-based system with touch-screen operation panel, online trends and USB data logging of all parameters. CIP systems available.


Hemraj Enterprises2/227 New Sonal Link Indl Estate, Link Road, Malad (W), Mumbai 400 064Tel: 022-66995104, 28898942E-mail: [email protected]

SS SMALL SCALE SPRAY DRYER


Denver make pneumatic lifter is designed for lifting and lowering heights from floor level to table tops and from table tops to the machine for processing.

Pick and place operation is done very quickly and effortlessly. Setting on speed can be done very easily. Operational costs are very low since it works on air pressure. It has provision of air filter for purifying air. The pneumatic lifter can be used with the help of electro magnets, vacuum lifts and mechanical grabs.


Hendo IndustriesF-3 Ansa Indl Estate, Saki Vihar Road, Saki Naka, Andheri (E), Mumbai 400 072Tel: 022-40054256E-mail: [email protected]

PNEUMATIC LIFTER


Gen

eral

Pro

duc

ts



It is required that the level of parameters of the effluent or incoming water has to be within the prescribed limit. However the quality of effluent does not remain same throughout the day. It therefore becomes essential to monitor various parameters again and again at different intervals to have correct idea.

Analyzing various parameters like COD, pH, conductivity, DO, etc, again and again is an expensive job. Instruments remain engaged. Chemicals are consumed. Valuable time of analysts is also spent.

Composite Sampler CS 10 from Spectralab is the answer. It consist of diaphragm pump with programmable controller for collection of water samples at predefined time intervals. Composite sampler will give representative sample from 1 to 10 liters in 24 hours as per the program selected. This will reduce analysis time and cost. One can install such samplers at various streams to get an idea of the quality at various sources. This will help you in taking corrective measures.


Spectralab Instruments Pvt LtdW-446, Rabale MIDC, Navi Mumbai 400 701Tel: 022-27644030 to 34E-mail: [email protected]

COMPOSITE SAMPLER


A real-time optical analyser utilising the precisive field proven optical bench, the SERVOTOUGH SpectraScan delivers a breakthrough capability in the continuous analysis of light hydrocarbon C1-C5+.Tunable band-pass filter enables simultaneous scanning of selected wavelength bands for gasses including methane, ethane, propane and iso-butane; unique tunable filter process with IR photometer technology delivers industry leading interference compensation; and chemometric algorithm provides a permanent span calibration, low cross-interference (<0,2%) linear response and high baseline stability.


Spectris Technologies Pvt LtdPlot No: A-168 MIDC, Thane Belapur Road, Khairna, Navi Mumbai 400 710Tel: 022-39342700E-mail: [email protected]

REAL-TIME LIGHT HYDROCARBON GAS ANALYSER


APPLs high quality silicone rubber sheets confirms to FDA 21 CFR 177.2600.

These sheets are processed in high pressure hydraulic moulding machines by accurately controlling the temperature and pressure, which ensures uniform physical properties of the sheets. Ami’s silicone sheets are available in white, red or orange or any other colours as per the customers’ requirements. Silicone sheets are available in sizes with respect to its thickness.


Ami Polymer Pvt Ltd303 Mahesh Indl EstateOpp: Silver Park, Mira-Bhayandar Road, Mira Road (E), Mumbai 401 104Tel: 022-28555107, Fax: 91-022-285378E-mail: [email protected]

SILICONE RUBBER SHEETS


General Pro

ducts



Tubular liquid level indicator is a simple and reliable device for direct reading in atmospheric or pressurised tanks. The indicator is fitted between two end blocks through gland packings. The indicator is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of tie-rods for 360o visibility of C-channels around the guage to protect it from accidental blows. Glass removal for replacement is possible without dismantling the gauge. 200 per cent PTFE bush as packing to ensure positive leak tightness for full vacuum as well as 6 kg/cm service pressure. It is available in single length of 2,000 mm c/c distance. Filpro Sensors can extend the length by coupling 2 or more through coupler. Filpro Sensors are providing air vent plug at the top and drain plug at the bottom for taking sample. The company can also provide in-built isolation valve or offset constructed isolation valve on request. The connection provided will be flanged/screwed/TC joint. It can be used in almost every application like water, waste water, effluent treatment plants, liquid sewage tanks, chemical dosing systems, chemical reactors, fertiliser, power generation, automobile, pharma, etc.


Filpro Sensors Pvt LtdNo: 130, 10th Cross, Petechennappa Indl EstateKamakshipalya, Magadi Main Road, Bengaluru, Karnataka 560 079Tel: 080-23286462E-mail: [email protected]

TUBULAR LEVEL INDICATOR


INDELMECH single girder cranes are designed up to 20 tonne capacity. These cranes are either hand-operated or electricaly-operated. The girder is fabricated from either ISMB-rolled section or MS plate box section in HOT crane. The chain pulley block is used as a lifting unit and in semi-EOT crane an electric wire/chain hoist is used. The crane is operated from pendent type pushbutton station, which is suspended from the crane.


Precision Industrial Corpn2/52B, Vrindavan Society, Thane (W), Maharashtra 400 601Tel: 022-25409654E-mail: [email protected]

SINGLE GIRDER CRANE


Chem Seals Engg Pvt Ltd offers double cartridge seal Type CS 22 (D) with dual seal; cartridge; independent of direction of rotation; double pressure balanced; integrated pumping device; etc. Variants available for accentric screw pumps and gas lubricated versions. It finds application in waste and water technology, chemical industry, petrochemical, pharamcutical industry, food and beverage industry.


Chem Seals Engg Pvt Ltd10 Sidhapura Indl Estate, Gaiwadi Lane, Off S V Road, Goregaon (W), Mumbai 400 062Tel: 022-28712765, 28772286, Fax: 91-022-28785876E-mail: [email protected] / [email protected] / [email protected]

DOUBLE CARTRIDGE SEALS


Gen

eral

Pro

duc

ts



TNC contouring controls from HEIDENHAIN for milling, drilling, boring machines and machining centers cover an entire range of applications from the simple, compact TNC 320 3-axis control to the iTNC 530 (up to 18-axes plus spindle), there is a HEIDENHAIN TNC control for nearly every application. The TNC 640 is a control for milling machines that are also capable of turning operations.

The HEIDENHAIN TNC controls are versatile. They feature both shop floor programming and offline programming, and are therefore ideal for automated production. They handle simple milling tasks just as reliably as the iTNC 530, for example, can handle high-speed cutting with especially jerk-free path control or 5-axis machining with swivel head and rotary table.

TNC part programs have long life because they are upwardly compatible. Programs from older TNCs can also run on the new models. When moving up to a more advanced TNC, the user merely builds on what he already knows.

Position display units serve to visualise the values measured with linear encoders, length gauges, rotary encoders or angle recorders. Areas of applications include measuring and inspection equipment, dividing apparatuses, monitoring of measuring equipment, manual machine tools, and measuring machines.

Digital readouts from HEIDENHAIN are designed to be highly user-friendly. Position display units from HEIDENHAIN feature a data interface for further processing in the higher-level electronics or simply to print out the measured values.


HEIDENHAIN Optics & Electronics India Pvt LtdCitilights Corporate Centre, No: 1 Vivekanandan Street, Off Mayor Ramanathan RoadChetpet, Chennai 600 031Tel: 044-30234000, Fax: 91-044-30234001E-mail: [email protected]

CONTROLS AND DIGITAL READOUTS FOR MACHINE TOOLS


Flexible seals for glass provides internal as well as external secure grip to avoid risk of spillage while opening or closing glass stoppered chemical containers, Shree Gaurav Rubber Products offers convenience of drawing or injecting small quantity of samples using syringe and needle. For stronger chemicals

options of fluropolymer septa and for repeat autoclaving in sterile applications options of silicone rubber available are B14, B19, B24, B29. Silicone septa for fermentators and autoclaves are also available.


Shree Gaurav Rubber Products112-B Marudhar Indl Estate, Opp: Old Syndicate Bank Goddev Road, Byayandar (E), Maharashtra 401 105Tel: 022-28197355E-mail: [email protected] / [email protected]

Sharplex offers pressure Nutsche filters with hydraulically-operated filter plate for opening and closing of filter.

The batch is fed to the vessel and pressurised with nitrogen or air. Filtrate is collected in a

separate drum through a bottom nozzle. Washing of cake also can be done through top nozzle.

After filtration, washing and drying, the bottom filter plate is opened hydraulically and cake is discharged in a drum without manual intervention. The GMP Models with MoC in SS-304, SS-316L, SS-316 Ti or any other exotic materials are available.


Sharplex Filters (India) Pvt LtdR-664, TTC Indl AreaMIDC, Rabale, Navi Mumbai 400 701Tel: 022-27696322, 27696331, Fax: 91-022-27696325E-mail: [email protected]

SEPTA & BOTTLE STOPPER PRESSURE NUTSCHE FILTER


General Pro

ducts



LT Soft Starters are manufactured with know-how from Fairford Electronic Ltd, UK. HT starters are manufactured with know-how from Benshaw, USA. The starters have features like keypad control, built-in motor protection, fault record, self-diagnostic, RS485 communication.

The SoftStarters are available in different types for variety of application. Series PFE compact, economical 2-phase control unit is available up to 18.5-kW. Series DFE is rugged 2-phase control, internally bypassed unit is available up to 250-kW. Series DSA is 3-phase 3-wire/6-wire with LCD display for setting and displaying running value of various parameters. It saves energy for partially loaded motors. Models from 5-kW to 1,000-kW/415 V/690 V. Series SP is soft starters for single phase motors useful for starting motors on solar power. Series HB is intelligent medium and high voltage electronic soft starter available up to 15 MW/11 kV.

Useful for pumps, compressors, fans, crushers, mixers, centrifuge machines, windmills, etc.


Jayashree Electron Pvt LtdEL-34/EK-12, J Block, MIDC, Bhosari, Pune, Maharashtra 411 026Tel: 020-27130529, 46901300, Fax: 91-020-46901357E-mail: [email protected]

DIGITAL SOFT STARTERS


The PTWS 4000 is a specialised 40-litre dissolution tester version that enables the user to perform either pooled tests or test for dosage forms that contain high concentrations of active material. The instrument is supplied with six stirred 4-litre and two unstirred 1-litre vessels. The instrument control is the same as for all other PTWS instruments described above but the framework is substantially different. Two lift pillars are used to move the upper head housing. Staggered and synchronous stirrer start is possible. The system comes in a SS design, which is one of the highlights of this instrument.


Pharma Test Instruments India Pvt LtdNo: 2, Sree Datri Niwas, 2nd Floor, Nagwara Circle, Outer Ring RoadOpp: Manyata Softech Park, Bengaluru, Karnataka 560 045E-mail: [email protected]

POOL TEST APPLICATION INSTRUMENT


Measurement specialist technologies for inductive liner absolute position transducers include the LVDT (linear variable differential transformer) and the LVIT (linear variable inductive transducer). These sensors feature friction-free, non-contact inductive magnetic coupling for extremely long cycle life and virtually infinite resolution. Various off the shelf and custom packaging options are available for the most demanding application requirements. Their AC operated LVDTs are compatible with their full line of signal conditions, panel displays and mini-controllers.


Jupiter ElectronicsA-401 & G 414-416 Kailash Indl Complex, B/h Godrej Colony, Parksite, Vikhroli (W), Mumbai 400 079Tel: 022-67551606, 25185474, Fax: 91-022-25170867E-mail: [email protected]

INDUCTIVE LINEAR POSITION TRANSDUCERS


Gen

eral

Pro

duc

ts



Excellence Consultants offers services for Continuous Agitated Fluid Bed Dryer (CAFBD). A Dryer based on reliable turbulent mixer system in conjunction with fluidized beds. The bed contents are continuously agitated by agitator in addition to the fluidization by air, avoiding lump formation in the bed.

CAFBD has many advantages over the conventional continuous FBD. It eliminates bed caking, lump formation and channeling addressing variations of feed quantity and moisture content.

It eliminates dead zones formed due to agglomeration of material on the fluidizing screen. It can be cold started without replacing the bed material.

CAFBD eliminates need for bed vibratory system. Excellent option for low temperature drying and heat sensitive products.

Replaceable fluidizing screens and agitator provides flexibility to capacity. Enhances efficiency with optimum use of energies; provides greater operational flexibility providing energy-efficient operation. Product cooling is integral part of the operation.

CAFBD is ideally suited for crystalline solids/salts, hygroscopic products, seeds, flakes drying with recovery of solvents; and for critical duties. Many CAFBDs are operating successfully.


Excellence Consultants508 Hermes Atrium, Plot No: 57, Sec-11, CBD Belapur, Navi Mumbai 400 614Tel: 022-27576052, 27576007E-mail: [email protected] / [email protected]

CONTINUOUS AGITATED FLUID BED DRYER


The S360 is a compact lightweight piston type pneumatic actuator, which has been developed to deliver superior performance for sterile biopharma applications. The Saunders S360 Lite range provides standard closure for spring-to-close applications in a compact lightweight package and is ideal for most applications and is available through sizes DN80-DN50 (0.25”-2.00”).

The S360 Lite range is a compact actuator that offers shut-off performance in line with standard industry applications. The S360 Lite is available in spring-to-close operation with optimum spring force to closure to minimise stress on diaphragms. It is suitable for 10 bar line pressure at 100 per cent Delta P (both PTFE and elastomer diaphragm).

The Saunders S360 power range offers higher operating closure performance in a compact package for high operating pressure or typical closing conditions with high pressure on both sides of the weir. The S360 Power spring-to-close actuator is available through sizes DN15-DN50 (0.50”-2.00”).

The Saunders S360 actuator is also available in spring-to-open and double acting modes. It is suitable for 16 bar line pressure at 100 per cent Delta P (both PTFE and elastomer diaphragm).

The Saunders S360 has a unique compressor attachment that permits easy conversion of the compressor between rubber and PTFE diaphragms.

The Saunders S360 features the ability to fully rotate the actuator head by 360o, enabling flexible installation and air port alignment. This in turn reduces installation cost and optimises incorporation into compact valving arrays or skid arrangements.


Crane Process Flow Technologies (India) LtdSolitaire, 5th & 6th Floor, S No: 131/1+2, ITI Road, Aundh, Pune, Maharashtra 411 007Tel: 020-30567800, Fax: 91-020-30567812

PNEUMATIC ACTUATOR


General Pro

ducts



Six halogen lamp heaters let you preheat the whole board in next to no time after turning the power On. Full-board heating and quick temperature ramping let you get the job done quickly when reworking or mounting post production components to multilayer substrates that require greater thermal capacity. As it does not contaminate the air, the HAKKO FR 870 also offers powerful support for a clean workplace environment in industrial applications. Non-contact system allows preheating of double-sided boards, which hot plates cannot handle.

Also mode step-heating method (maximum of three steps/step 1-3) heats PWBs slowly and evenly, letting you transmit 100 per cent of the heat energy from a rework system and soldering iron. You will never be forced to work with a higher set temperature due to insufficient heat again. Once a PWB is positioned, boards of the same dimensions can be removed or attached in a sngle motion. This design greatly facilitates continuous work.


Sumitron Exports Pvt Ltd27 Community Centre, Naraina, Phase 1, New Delhi 110 028Tel: 011-41410531, Fax: 91-011-41410494, 25891761E-mail: [email protected] / [email protected]

INFRARED HALOGEN HEATER


Remi Sales & Engg Ltd offers ultra-flat compact magnetic stirrer, guaranteed with modern magnet coil technology. It is wear-free with no moving parts. To ensure better mixing, the lab disc can reverse direction of rotation automatically every 30 seconds. It has no moving parts. It has low aspect ratio (just 12 mm thick); software driven gradual acceleration; adjustable speed (15 to 1,500 RPM) with digital display; microprocessor-controlled with last run memory feature; stirring cap 800 ml setup place or 100 mm; universal power supply small wall mount adaptor; IP 65 compliant design (water spill resistant); corrosion-resistant SS top surface to fight harsh chemicals; recommended stir bar length 25 mm. It is supplied with 1 high strength stir bar.


Remi Sales & Engg LtdRemi House, 11 Cama Indl Estate, Walbhat Road, Goregaon (E), Mumbai 400 063Tel: 022-40589888, 26851998, Fax:91-022-40589890E-mail: [email protected]

MAGNETIC STIRRERS


IEWI sanitary back pressure regulating valve is self-setting/self-actuating design that is preset and actuated directly by upstream static line pressure. It is specially designed to maintain pressure in PW/WFI water distribution loops. The valve combines quick and easy cleaning and can be dismantled and assembled easily.


Industrial Equip Wash Inc8-B Surat Singh Indl Estate, S V Road, Jogeshwari (W), Mumbai 400 102Tel: 022-26797941, Fax: 91-022-26798066E-mail: [email protected] / [email protected]

BACK PRESSURE REGULATING VALVES


Gen

eral

Pro

duc

ts



Shefa Industries offer a qualitative assortment of automatic and manual pneumatic stirrer, which can be operated automatically as well as manually, depending on the requirement. Besides, these automatic and manual pneumatic stirrers are designed as per the specifications demanded by the clients, in terms of size, dimensions and capacities.

Pneumatic stirrer is operated on pneumatic compressor air, for homogeneous mixing of paint to avoid settling heavy particles, metallic particles, resin, pigmentation, etc, at the bottom of the container. Stirrer can be mounted on stand, PFT and container.


Shefa IndustriesGala No: 1, U K Quari Compound, Gandhi Nagar, Vikhroli (W), Mumbai 400 063Tel: 022-25942473E-mail: [email protected]

STIRRER, PNEUMATIC STIRRER


Forbes Marshall’s in-situ Zirconia Oxygen Analyser offers a 0.2 per cent accuracy using a unique patented gold brazing technology for the zirconia cell, which ensures extremely tight measurement control. The probe, fitted with ceramic/sintered filters, comes with V shield deflectors so no back purge is required for probe cleaning.


Forbes MarshallMumbai-Pune Road, Kasarwadi, Pune, Maharashtra 411 034Tel: 020-27145595, Fax: 91-020-27147413E-mail: [email protected]

OXYGEN ANALYSERS


The automatic self-cleaning auto backwash filters Type PRVC are capable of filtering any solid particles larger than the specified degree of filtration. The water or fluid enters the filter inlet nozzle and flows from inside of filter elements to outside. The dirt particles are collected on the inside of the filter elements. As the dirt level increases the differential pressure between the dirty and clean side increases and when the differential pressure reaches the preset value back-flushing starts automatically. In the manual mode back-flushing (cleaning cycle) is activated by means of adjustable timer. During the cleaning or back-flushing cycle two signals are issued by the control panel, one actuates the motor, the other bottom valve. Geared motor rotate the internal arm under each filter element at the same time valve opens causing a temperary reverse flow to accomplish the cleaning of dirty filter element and removal of accumulated dirt to drain through bottom valve. Most suitable for cooling tower water filtration (side stream filtration), river water filtration, process water filtration, sea water filtration, filtration before RO. It finds application in power station, process industry, steel industry, sewage treatment plant, environmental technology, mining, paper industry, machine to industry, etc.


Sharplex Filters (India) Pvt LtdR-664, TTC Indl Area, MIDC, Rabale, Navi Mumbai 400 701Tel: 022-27696322, 27696331, 27696339. 69409850, 69409860, Fax: 91-022-27696325E-mail: [email protected]

AUTO BACKWASH FILTER


General Pro

ducts



FLEXIM presents new generation of clamp-on ultrasonic flowmeters: the FLUXUS F/G 721. With its new hardware design and improved, powerful digital signal, it sets standards in terms of accuracy, reliability and versatility.

FLUXUS® F/G721 offers non-intrusive flow measurement of virtually any kind of liquid or gas, from the smallest tubing to the largest penstock, independent of the pressure inside the pipe and over a very large temperature range. Highly sophisticated signal filters and substantially improved measurement algorithms together with the proven transducer technology and sturdy mountings make the FLUXUS F/G721 a state-of-the-art measuring solution even for the most challenging applications, such as flow measurement of liquids with gaseous of solid entrainments or even of wet gas. The meter adapts itself automatically to the respective measurement conditions and compensates for perturbations. Extremely fast measurement cycles allow for precise real time monitoring of highly dynamic processes. FLEXIM calibrates transmitters and transducers independently from each other, therefore ensuring highest accuracy in the field, regardless of the actual configuration of the measuring system. Explosion proof versions for operation in hazard areas (ATEX, IECEX Zone 2, FM Class I, Div. 2, EAC TR TS, Inmetro) are available.

The FLUXUS F/G721 comes with all common communication protocols. HART, Modbus, Foundation Fieldbus, Profibus PA and BACnet allow bidirectional field communication, parameterisation and online diagnostics. Further special configurations guarantee optimal customisation to the individual application.

The FLUXUS F/G721 is also one step ahead in terms of user guidance and diagnostics. It can easily be parameterised via USB. Its ethernet connectivity provides additional bidirectional communication capabilities.


FLEXIM GmbHWolfener Str 36, 12681, Berlin, GermanyTel: +49 30 936676 914, Fax: +49 30 936676 80E-mail: [email protected]

CLAMP-ON ULTRASONIC FLOWMETERS


KSB Pumps Ltd offers KSBSol which is a submersible pumpset with high energy efficiency and suitable to run using solar power. KSBSol pumpsets are centrifugal pumps in radial and mixed flow type construction coupled with AC motors and are specially designed and matched to the requirements of solar pumping applications like drip irrigation, sprinkler irrigation, water supply, etc.

Pumpsets are capable to work under low sun intensity. Motors are suitable to work with VFD/MPPT controller. These pumpsets are suitable for borewells of sizes 100 mm and above. These pumpsets are designed using the proven German technology and manufactured at Sinnar, near Nashik. These KSBSol pumpsets in the first phase are available up to 5-HP motors which can deliver heads up to 65-m and flow up to 1,26,000 liters per day. Other customized models are also offered from KSB’s wide range up to 150 HP.


KSB Pumps LtdMumbai-Pune Road, Pimpri, Pune, Maharashtra 411 018Tel: 020-27101000E-mail: [email protected]

SOLAR POWERED PUMPS



News Industry News

Mumbai, India: With the recent acquisition of Ismatec pumps from IDEX Health and Science, Cole-Parmer has expanded its already robust line of fluid handling and analysis products. The Swiss-engineered Ismatec pumps are renowned for their clocklike precision and manufactured according to strict ISO 9001:2008 standards. The independent channel control (ICC) pumps provide lower pulsation, better reproducibility, and a longer tubing life. Variable flow and bidirectional capabilities in each channel add to their flexibility. The uniqueness of the ICC allows for individual channel calibration. Ismatec pumps are ideal for dissolution testing in pharmaceutical dosing, chromatography applications, the addition of a reagent to a reactor, and a variety of research and development purposes. Single-channel Ismatec Reglo Quick pumps offer quick tubing changes while Flowmaster pumps are designed for heavy-duty processes and increased hygienic requirements.

“I am very excited about this acquisition as Ismatec expands our depth of micro flow products complementing our Masterflex Product Line. Ismatec has unique pump heads which reduce damage to cells, useful in biotech applications. Reglo ICC, is another unique potential multichannel pump in which each channel has variable flow adjustment,” said Rakesh Aggarwal, Managing Director – Asia Pacific, Cole-Parmer.

Ismatec Pumps Now Part of the Cole-Parmer Family

Kirloskar Brothers Acquires Rodelta Pumps

Pune, India: Kirloskar Pompen BV, a 100 per cent subsidiary of Kirloskar Brothers International (KBI) has completed the acquisition of Netherlands-based Rodelta Pumps International. Rodelta is engaged in manufacturing of API and Non-API Pumps for Oil & Gas, Pulp & Paper, Water, Chemical and various other applications since 1946. With the local manufacturing, complementary products, product technology, anticipated synergies and qualified manpower, KBL group is primed to provide its customers with new technology and engineering solution. Speaking about the new development, Varinder Dhoot, Managing Director, Kirloskar Pompen BV said, “Acquisition of Rodelta Pumps International will not only give fillip to KBL Groups desire to offer world-class products and technology in the global markets, but also strengthen our plans to offer localised packages and services through manufacturing plants in each geography that we operate in.”

Rodelta Pumps International BV manufactures pumps and components at Hengelo, the Netherlands. The company has been supplying pumps to various industries for more than 60 years. Rodelta operates in industrial markets such as Water-Treatment, Drinking water, Paper & Pulp, Oil & gas, Chemicals & Hydrocarbon Processing. KBL Group synergy will present a combined experience of almost 2 centuries, a very wide range of products and customised solutions to its customers.

Covestro Up & Running

Mumbai, India: One of the world’s leading polymer materials suppliers has a new identity. From September 1, 2015 Bayer MaterialScience is operating under the Covestro name. The company is now legally and economically independent, but will remain a 100 per cent subsidiary of Bayer AG. Bayer wants to float Covestro on the stock market by mid-2016 at the latest in order to concentrate exclusively on the life sciences businesses. “Independence will enable us to bring our strengths to bear in global competition more quickly, effectively and flexibly,” said Patrick Thomas, CEO, Covestro. Covestro has a new, colourful logo. Its vision is also new: ‘To make the world a brighter place. Covestro supplies key industries around the world, such as the automotive, construction and electronics sectors, as well as the furniture, sporting goods and textiles industries. With its products and applications solutions, the company is helping to meet the major challenges of our time, from climate change and resource depletion, increasing mobility and urbanisation to population growth and demographic change.

KSB India’s ‘Make in India’ initiative

Pune, India: KSB India bagged a prestigious order for the supply of 6 sets of boiler feed pumps for Alstom Bharat Forge Power Ltd. These Pumps will be installed at NTPC’s 2x660 MW supercritical power project located in Tanda, Uttar Pradesh. The scope of the order includes supply of high pressure boiler feed pumps, accessories like base plates, electric motors, hydraulic couplings, oil coolers, gear box, noise enclosures and related instrumentation. On receipt of this order, Dinesh Khanna, Director - Sales & Marketing, KSB Pumps Limited, informed that the supply of main boiler feed pumps and booster pumps for this order is a part of KSB India’s ‘Make in India’ initiative. These pumps will be manufactured in KSB’S Chinchwad plant, which is a dedicated unit for energy projects and is well equipped with modern manufacturing and testing facilities. In-house performance testing will also be conducted at reduced speed in order to check its performance and to ensure that a quality product is delivered. This has always been a hallmark of KSB!

Industry News_Final.indd 48 16-09-2015 15:41:36


News

Jubail, Saudi Arabaia: Sadara Chemical Company and EA Juffali & Brothers have signed a second supply agreement, this time for Butyl Tri-Glycol ether (BTG), following the successful execution of an MDI supply agreement in July 2015. With this new agreement, Sadara will supply BTG to one of the new plants that will be built in the planned Juffali chemical production complex to be based among other plants in PlasChem Park in Saudi Arabia’s Jubail Industrial City II.

The new Juffali complex will consist of several manufacturing plants designed to produce highly differentiated chemicals and products slated for use in the Kingdom of Saudi Arabia’s various industries. Some of the plants will receive a direct feed of Sadara’s products, namely the MDI plant and the BTG plant that have been announced thus far, while other plants will rely on raw materials provided by other suppliers. The Juffali BTG project will encompass several specialty chemical products and includes production of about 5,000 tons/ year of different grades of premium brake fluids. It will be the first brake fluid production unit in the Middle East and North Africa and will supply the Middle East’s growing demand for these products, replacing imports. This Project is almost totally dependent on raw material from Sadara and its location is most advantageous. Juffali will license state of the art technology, process design and engineering advisory to complete its project, and the resulting brake fluid products will serve OEM, related accounts, aftermarket and commercial transportation customers.

Sadara to Supply BTG to Juffali’s Chemical Complex

Acella Acquires Premium Spray Products

Missouri, USA: Accella Performance Materials announced the acquisition of Premium Spray Products, a leading manufacturer of spray foams for insulation and roofing as well as specialised polyurethane systems for niche applications. Premium Spray Products, based in Marietta GA, and Regina, Saskatchewan will continue its outstanding product line and customer service as part of the Accella family. “The acquisition supports Accella’s strategy to build the leading polyurethane systems house in North America. We are attracting, investing in and developing the ‘best of the best’ in polyurethane technology and service. In combination, our nationwide manufacturing and technical sales network will bring enhanced value and services, as well as an expanded offering, to provide even more solutions to our customers. Customers may continue to expect the same level of high quality products, service and support from Premium, with additional resources to bring even greater customer value,” remarked Andy Harris, President and CEO, Accella Performance Materials. Mac Hess, President, Premium Spray Products, who will stay on with Accella said, “We are very excited about the potential to leverage the technical, financial and personnel resources from Accella across North America. This is truly a great cultural fit to bring the best value and opportunities to customers and employees alike. ”

DEINOVE & Tyton BioEnergy Collaborate to Produce Green Chemicals

Montpellier, France: DEINOVE and Tyton BioEnergy Systems (Tyton) have entered into a technological and commercial partnership. The main goal of the partnership is to combine Tyton’s energy tobacco feedstock, process and production infrastructure with DEINOVE’s Deino-based fermentation solutions in order to produce green chemical compounds of high commercial value. Tyton’s energy tobacco technology combines advancements in plant sciences, agronomics, and processing to produce cost-competitive sugars, oils, proteins and other green chemicals at high profits. One acre of Tyton’s patented non-smoking tobacco outperforms corn, soy and other cellulosic feedstocks.

DEINOVE’s CBP (Consolidated BioProcessing) solutions are currently optimised on a variety of sugar sources like corn, wheat and urban waste, and they can flexibly utilise simple, starch or cellulosic sugars. The energy tobacco crop developed by Tyton provides a compelling opportunity to diversify applications for Deinococcus, and the two companies will explore various renewable chemical options for commercialisation, beginning in the southeast region of the United States.

Rosneft to Buy a Stake of 30% in CCPC

Beijing, China: Ren Jianxin, Chairman, ChemChina and Igor Sechin, President, Rosneft, signed a Heads of Agreement on Cooperation in Equity Investment of Rosneft in ChemChina Petrochemical Corporation (CCPC) and other documents in presence of the President of People's Republic of China Xi Jinping and the Russian President Vladimir Putin on September 3, 2015.

According to the agreement, both sides will actively promote the signing of the final transaction documents. Upon the completing of the transaction, Rosneft will subscribe for a 30 per cent stake in CCPC. The two sides will continue to carry out cooperation in investment in petrochemical projects, oil products trade and so on. The signing of the Heads of Agreement marks a breakthrough in the cooperation between the two sides after the signing of a memorandum earlier this year at the St. Petersburg International Economic Forum.

Industry News_Final.indd 49 16-09-2015 15:43:31

Advt.indd 2 18-08-2015 16:25:26


News

Technology News

Highly Efficient Catalyst Eases Way to Hydrogen Economy

Wisconsin, USA: Hydrogen could be the ideal fuel; whether used to make electricity in a fuel cell or burned to make heat, the only byproduct is water; there is no climate-altering carbon dioxide. Like gasoline, hydrogen could also be used to store energy. Hydrogen is usually produced by separating water with electrical power. And although the water supply is essentially limitless, a major roadblock to a future ‘hydrogen economy’ is the need for platinum or other expensive noble metals in the water-splitting devices. "In the hydrogen evolution reaction, the whole game is coming up with inexpensive alternatives to platinum and the other noble metals," says Song Jin, a professor of chemistry at the University of Wisconsin-Madison. In the online edition of Nature Materials, Jin's research team reports a hydrogen-making catalyst containing phosphorus and sulphur - both common elements - and cobalt, a metal that is 1,000 times cheaper than platinum.

Catalysts reduce the energy needed to start a chemical reaction. The new catalyst is almost as efficient as platinum and likely shows the highest catalytic performance among the non-noble metal catalysts reported so far, Jin reports. Read more about this research on http://news.wisc.edu/24010

A New Type of Solar Power through Nanoscience

California, USA: Imagine we could do all that without adding a single molecule of the greenhouse gas carbon dioxide (CO2) to the atmosphere. It sounds almost magical, yet green plants and some bacteria basically do this every day. Through photosynthesis, they turn water and carbon dioxide into sugar. Sugar is an organic fuel that stores the sun’s energy for plants to use at night or when they awake leafless in the spring. What if engineers could tweak this natural process to produce natural gas or gasoline?

Advances in nanoscience are rapidly bringing that vision closer to reality. In a pair of ground-breaking papers, published this past April and August, respectively, Peidong Yang, co-director of the Kavli Energy NanoScience Institute and professor of chemistry at the University of California, Berkeley, led a team that achieved synthetic photosynthesis by marrying nanoscience and biology. Yang and his colleagues created a biologically inspired but completely artificial system that converts the sun’s rays into liquid fuel. Read more on the research at www.kavlifoundation.org/science-spotlights

Rice Researchers Demonstrate Solar Water-Splitting Technology

Houston, USA: Rice University researchers have demonstrated an efficient new way to capture the energy from sunlight and convert it into clean, renewable energy by splitting water molecules. The technology, which is described online in the American Chemical Society journal Nano Letters, relies on a configuration of light-activated gold nanoparticles that harvest sunlight and transfer solar energy to highly excited electrons, which scientists sometimes refer to as ‘hot electrons.’ “Hot electrons have the potential to drive very useful chemical reactions, but they decay very rapidly, and people have struggled to harness their energy,” said lead researcher Isabell Thomann, assistant professor of electrical and computer engineering and of chemistry and materials science and nanoengineering at Rice. “For example, most of the energy losses in today’s best photovoltaic solar panels are the result of hot electrons that cool within a few trillionths of a second and release their energy as wasted heat.” Capturing these high-energy electrons before they cool could allow solar-energy providers to significantly increase their solar-to-electric power-conversion efficiencies and meet a national goal of reducing the cost of solar electricity. Read more about the research on http://news.rice.edu/

Linköping, Sweden: For years we have believed that ordered polymer chains increase the conductivity of plastic. And a new generation of polymers has been developed. It is true that these new polymers are more conductive, but for completely different reasons – according to researchers from Linköping University and Stanford University. Organic electronics has many advantages; it is inexpensive, flexible and lightweight it does not consume any scarce resources. In terms of applications, we are only limited by our imaginations. There has been a lot of development in polymers since the phenomenon of conducting and semi-conducting plastics was discovered and in 2000 awarded a Nobel Prize. A polymer consists of long chains of hydrocarbon, where other elements are bound, which give the particular plastic its properties. Research is underway, and researchers and developers in the chemical industry have developed new polymers that conduct better. “The charge is transported two to three times faster in the latest generation polymers,” explains Dr Simone Fabiano, researcher at the Laboratory of Organic Electronics, Linköping University, Campus Norrköping. Read more on the research at www.liu.se/forskning

A Step towards Faster Organic Electronics

Technology News.indd 51 15-09-2015 16:32:14

Pro

ject

Up

dat

e


New Contracts/Expansions/Revamps The following list is a brief insight into the latest new projects by various companies in India.

BMS Starch is implementing a 300-TPD starch manufacturing unit and a 6-MW biomass based co-gen power plant in village: Kurandi, district: Bastar, Chhattisgarh The project will be spread over 26 acres of acquired land. The estimated cost of the project is ` 1,350-million. Equipment supplier is yet to be appointed. Civil work is in progress. The project is expected to be completed by 2016.

Globex Laboratories (R&D) proposes a pigments manufacturing unit at village: Dabhasa, district: Vadodara, Gujarat. According to MoEF sources, the project will come up in the existing land on 9,312 sq m. Kadam Environmental Consultants, Vadodara is the environmental consultant. The project will entail manufacture of 40-TPM red pigments, 40-TPM yellow pigment and 450-TPM dilute phosphoric acid. Environment clearance has been obtained for the products – red pigments and yellow pigments. Construction work has begun, as EC and NOC have been received. Effluents generated will be treated in effluent treatment plant having MEE. The company has applied for Amendment in Environmental Clearance dated 26th

September 2012 for change in fuel from LDO to agro waste briquettes and addition of one raw material, ie, phosphoric acid and generation of dilute phosphoric acid (25 per cent basis) as by-product.

Bohra Industries is implementing an expansion of its chemical and fertilizer manufacturing unit at Umarda, district: Udaipur, Rajasthan on 14,500 sq m of existing land. The project will entail expansion of single super phosphate capacity from 400-TPD to 600-TPD, granulated super phosphate from 200-TPD to 300-TPD and addition of new products namely 150-TPD triple super phosphate, 550 -TPD synthetic gypsum, 30-TPD di-calcium phosphate, 160-TPD phosphoric acid, 0.3-TPD potassium fluoride, 150-TPD H2SO4 and 0.3-TPD Sodium Tri Polyphosphate (STPP). Machinery has been ordered from China. Civil work is in progress. The project is scheduled for completion in 2018.

Ami Lifesciences proposes expansion of its synthetic organic chemicals manufacturing unit (viz, pharmaceutical bulk drugs and drug intermediates) from 65.70-TPM to 131.60-TPM in Padra, district: Vadodara, Gujarat. The estimated cost of the project is ` 87.046-million. Environmental Consultant to this project is Envisafe Environment Consultants. According to MoEF sources, total plot area is 23,760-sq m (existing 10,270-sq m and 13,490-sq m for expansion). The unit currently manufactures 2-TPM 1-Acetyl Naphthalene, 1-TPM 2-Acetyl Naphthalene, 6-TPM itopide HCl, 1.20-TPM loxapine succinate, 0.30-TPM amoxapine, 6-TPM venlafaxine, 6-TPM progunil HCl, 6-TPM CB-2-L-Valine, 0.60-TPM nateglinide, 0.60-TPM quetiapine, 24-TPM carbomazepin and 12-TPM oxacarbomazepin. The expansion will involve addition of new

CHEMICALS products. Water requirement from ground water source will be increased from 34.53-cu m/day to 181-cu m/day after expansion. Effluent generation will be increased from 9.35-cu m/day to 79.5-cu m/day after expansion. Highly concentrated effluent will be sent to captive incinerator for incineration. Remaining effluent (70-m3/day) will be treated in the ETP comprising primary, secondary and tertiary treatment. Treated effluent will be sent to CETP for further treatment. ETP sludge, inorganic residue and incineration ash will be sent to TSDF. Spent carbon, organic residue will be sent to incinerator.

Astrica Laboratories is implementing a 240-TPA synthetic organic chemicals manufacturing project at a cost of ̀ 78.8-million in village: Ananthsagar, district: Medak, Telangana. Team Labs & Consultants are the environmental consultants. The project will come up on 6.97-acre of land. According to MoEF sources, it is proposed to treat all HTDS effluent in stripper followed by MEE and ATFD. All LTDS effluent including domestic effluent shall be treated in biological treatment followed by RO system. RO rejects sent to MEE and permeate is used for cooling towers as make up. Solid wastes are generated from the process, solvent distillation, collection/neutralization tank, waste oil from DG sets, used batteries from DG sets. The ash from boiler is sold to brick manufacturers. The solid wastes; evaporation salts, wastes from the process in inorganic form, ie, process salts and filtration aids shall be disposed to the TSDF, while the hazardous wastes of organic nature, ie, distillation residues shall be disposed to authorized cement units and other wastes like used oil and used batteries shall be sent to authorized recyclers. The sludge from treatment plant shall be sent to TSDF. The basic technology involved in the manufacturing of bulk drugs is the process kettles, heat exchangers, centrifuges and storage tanks. To support the process, equipment boilers, chilling plants, cooling towers, etc, are required. All the above equipment can be sourced indigenously. 80 per cent of civil work has been completed and remaining 20 per cent is in progress. The project is scheduled for completion in December 2015.

Adi Finechem is planning a 40-TPA specialty products manufacturing project on a 2-acre land at an estimated cost of ` 400-million in village: Chekhala, district: Ahmedabad, Gujarat. The project is waiting for environmental clearance.

Lakhani Dyestuffs is implementing a 100-TPM reactive dyes manufacturing project in MIDC, Ambernath (W), district: Thane, Maharashtra. Environmental clearance has been received for the project. Land has been acquired and civil work is in progress. The project is scheduled for completion in H2 2015.

RSPL is planning a 1,500-TPD soda ash plant and 40-MW captive power project in village: Kuranga, district: Jamnagar, Gujarat. Land

Project update.indd 52 16-09-2015 10:41:55

Project U

pd

ate


MINING

NON-CONVENTIONAL ENERGY

acquisition is in progress. 85 per cent of land has been acquired. The project is waiting for environmental clearance. The entire project is planned for completion in 5 years from zero date.

Superhouse is planning an expansion of its chemical mix-manufacturing project from 200-kg/day to 500-kg/day in UPSIDC Industrial Area, district: Unnao, Uttar Pradesh. The product will be used in leather tanneries. The project will involve installation of containers. The project is in planning stage.

Stellar Chemical Laboratories is planning an expansion of its organic chemical manufacturing project from 7.1-TPM to 84.1-TPM in village: Derol, district: Panchmahals, Gujarat. Machinery is yet to be ordered. Work on the project is expected to commence after receipt of environmental clearances and the completion date is yet to be finalized.

NTPC is planning the Kudanali-Luburi coal mining project in district: Angul, Odisha. The company has signed an agreement on June 15, 2015 with Jammu and Kashmir State Power Development Corporation (JKSPDCL) for promoting a joint venture company with 67:33 equity participation for undertaking exploration, development and operation of jointly allocated Kudanali-Luburi Coal Block at Odisha by the Ministry of Coal.

Bharat Coking Coal is planning the Pootkee Balihari coal mining project in district: Bokaro, Jharkhand. Tenders have been floated for development of Pootkee Balihari project and extraction of coal from Pootkee Balihari project, Pootkee Balihari area by mass production technology package for a minimum guaranteed production of 8.1 -million tonne of coal during 9 APP subject to maximum 1.04-million tonne of coal in any one year (APP) on turnkey basis. Work includes additional exploration (if desired so by the contractor); preparation of mining plan, detailed Project Report and obtaining approvals from concerned authorities. The last date for submission of bids is 21st September, 2015.

DSP Associates is planning a 15,17,600-TPA sand (minor mineral) mining project in the mines of Tikola-1 Sand Unit at village: Tikola, district: Gurgaon, Haryana. Mining lease area is 42.50-hectare. The estimated cost of the project is ` 55-million. The project is waiting for environmental clearance. Mining work is expected to commence in December 2015. According to MoEF sources, out of the total area, 31.50-hectare area falls in the river bed and 11-hectare area falls in agricultural land (outside river bed). Method of mining will be opencast semi-mechanized without drilling and blasting. The mine will be excavated out in layers up to a depth of 3-m in riverbed and 9-m in agricultural field. Letter of Intent (LOI) for mining contract has been granted for a period of 9 years.

Barmer Lignite Mining Company, a JV between Rajasthan State Mines & Minerals & Raj West Power, a subsidiary of JSW Energy

is planning an expansion of the Kapurdi Open Cast Lignite Mining project from 3.75-MTPA to 7-MTPA in Kapurdi, district: Barmer, Rajasthan at an estimated cost of ` 18,000-million inclusive of a new lignite mining project at Jalipa mines. The project is waiting for environmental clearance.

Hubli Electricity Supply Company is planning solar RTPV grid connected power plants in district: Belagavi, Karnataka. E-tenders have been floated to design, manufacture, supply, installation, testing and commissioning of solar RTPV grid connected power plants on the roof-tops of 31 of HESCOM office buildings in Belagavi Zone Jurisdiction for total load of 136-KWp including operation and maintenance for a period of five years. The approximate amount put to tender is ` 18.62-million.

Kranthi Edifice is implementing a 20-MW solar photovoltaic power project in vi l lage: Tadoor, distr ict : Mahabubnagar, Telangana. The estimated cost of the project is ̀ 1.2-billion. The project is being set up on 100-acre of land. Equipment supplier is under negotiation. Civil work is done in-house. Power generated will be sold to Telangana State Transmission Corporation (TSTRANSCO). The project is scheduled for completion in September 2015.

Karnataka Renewable Energy Development is planning a 10-MW solar power project at an estimated cost of ̀ 600-million (approximately) in village: Tingloor, taluka: Madhugiri, district: Tumkur, Karnataka. Surana Telecom And Power has received Letter of Award (LoA) for development of the project.

Maharashtra State Power Generation Company is planning a 50-MWp solar photo voltaic power project in Gangakhed, district: Parbhani, Maharashtra. The company is scouting for land. Other details are yet to be finalized.

Azure Power India is implementing a 10-MW solar photovoltaic power project in taluka: Hiriyur, district: Chitradurga, Karnataka. PPA has been signed with Bangalore Electricity Supply Company (BESCOM). Civil work and panel installation work is in progress.

Government of Odisha is planning a 20-MW solar power plant in Manmunda, district: Boudh, Odisha. Green Energy Development Corporation of Odisha is the nodal agency. According to reports, the nodal agency has identified about 120-acre of land at Manmunda for establishment of the project. The land has been allotted to the agency from the industrial park area earmarked by Odisha Industrial Infrastructure Development Corporation (IDCO).The EPC tender is for development of the power plant and maintenance for a period of 10 years. Apart from the Boudh project, the agency is in the lookout for additional land in Koraput, Kantamal and Bolangir areas for installing about 200-MW solar energy capacity.

Project update.indd 53 16-09-2015 10:42:06

Fort

hco

min

g Ev

ents

Fort

hco

min

g Ev

ents


Automation & Robotics ExpoDates: 6-8 October 2015 Venue: Auto Cluster Exhibition Centre, PuneEvent: This event showcases products like factory automation systems, industrial au tomat ion , mach ines , senso rs and measuring equipment, advanced camera techno logy, assembly and hand l ing , machine vision, hydraulics and pneumatics, laser technology, motion drives, servo drives, actuator drives, assembly lines, industrial image processing, services for factory automation, etc, in the industrial products industry.

For details contact:IBK Media224, B-Wing, Pranik ChambersSaki Vihar Road, Saki Naka, Mumbai 400 072

Analytica Anacon IndiaDates: 8-10 October 2015 Venue: HITEX International Exhibit ion Centre, HyderabadEvent: This event showcases products like science and product information, news, facts and backgrounds on techniques, p r o d u c t s , d i s c i p l i n e s , c o m p a n i e s , chemicals and other topics regarding chemis t r y and ana l y t i c s , l abo ra to r y technology, analysis, biotechnology, etc, in the business services industry

For details contact:Messe Munchen GmbhMessegelaende, Germany

Indian Machine Tools And Automation Expo Dates: 9-11 October 2015 Venue: Ganesh Kala Kreeda Manch, PuneEvent: This event showcases products like manufacturers/suppliers of machine tools and automation products/services providers to showcase their products before fraternities of the machine tool, automation, cutting tool and end user industries, etc, in the industrial products, hand, machine and garden tools, plant, machinery and equipment industries.

For details contact:Paramount ExhibitorsC-84, Indl Area-VII, Mohali, Chandigarh

PPMA ShowDates: 29 September-2 October 2015Ve n u e : N a t i o n a l E x h i b i t i o n C e n t r e , Birmingham, U.K.Event: Being organized by Reed Exhibitions UK at National Exhibition Centre, UK, PPMA Show is characterized as one of the leading show for processing and packaging machinery. It will become a hub of leading suppliers.

For details contact:Reed Exhibitions Ltd Gateway House, 28 The Quadrant Richmond,Surrey TW9 1DN, U.K.Tel: +44 (0)20 8271 2134Fax: +44 (0)20 8334 0740

Plastics Recycling Show 2015Dates: 25-26 November 2015 Venue:The Tour & Taxis Venue, Brussels, BelgiumEvent: PRS will feature a pan European exhibition and multiple conference streams designed specifically for the plastics recycling industry. The event will bring together key players from the plastics and recycling sectors in order to learn, network and capitalise on the business opportunities plastic recycling offers.

For details contact:Plastics Recyclers EuropeAvenue de Cortenbergh 711000 Brussels, BelgiumTel: +32 2 742 96 82Fax: +32 2 732 63 12

Chem ShowDates: 8-10 December, 2015Venue: Jacob K Javits Convention Center, NY, USAEvent: The Chem Show, North America’s latest process equipment and technology exposition gives you direct access to equipment, systems and services by the CPI’s most innovative suppliers companies who can help you improve product quality, lower operating costs and increase efficiency.

For details contact:International Exposition Co15, Franklin, Westport, U.S.A.

INTERNATIONALChemspec IndiaDates: 7-8 April 2016 Venue: Bombay Convention & Exhibition Centre, MumbaiEvent: This event showcases products like biotechnology products and accessories, colours and dyes, crop protection products and equipment, agrochemicals, contract and toll manufacturing services, cosmetics, healthcare products and accessories, etc, in the chemicals and dyes, business services, manufacturing, fabrication, repair and maintenance industries.

For details contact:Quartz Business Media LtdQuartz House, 20 Clarendon Road, SurreyRedhill, U.K.

ChemTECH Chennai 2015Dates: 10-12 December 2015Venue: TNTPO, Exhibition Ground, ChennaiE v e n t : Wo r l d m e e t o f c h e m i c a l s , petrochemicals , pharma and process industry in India encompassing exhibition and conferences.

ChemTECH Gujarat 2016Dates: 10-12 February 2016 Venue: Gujarat University Exhibition Hall, Ahmedabad

Event: The ChemTECH World Expo is a fair that is dedicated to the chemical industry and stands apart by the presence of laboratory chemicals, specialty chemicals, organic and inorganic chemicals, agrochemicals, chemical products and compounds, polymers, chemical processes and equipment, chemical manufacturing and all services associated with it. The fair aims to revolutionize the chemical industry and includes all that is connected with biotechnology, environment and pharmacy. It is considered as the second largest global event for the chemical processing industry, etc, in the chemicals and dyes industry.


Jasubhai Media Pvt Ltd Taj Bldg, 3rd Floor, 210 Dr D N RoadFort, Mumbai 400 001 Tel: 022-40373636, Fax: 91-022-40373635E-mail: [email protected] / [email protected]

Forthcoming Events.indd 54 15-09-2015 15:45:28

Bookshelf


ENVIRONMENT MANAGEMENT

Authors: P S Bhushana Rao and G J V Jagannadha Raju Price: ` 280.00No of pages: 376 pages (Paperback)Publisher: Deep & Deep Publications

About the book: Contents includes VIII Parts and 20 Chapters contributed by 30 authors on Joint Forest Management, Strategies For Biodiversity Conservation, Watershed Management, Wetland Management, Hospital Solid Waste Management, Effluent Treatment Plant, Environment Management in Pulp and Paper Industries, Aquaculture Practices and Fish Health Management, Environmental Education, Environment

Audit and Corporate Environmentalism Alternate Dispute Resolution (ADR) Technique.

MARSHES: ECOLOGY, MANAGEMENT & CONSERVATION Editors: Demarco C Abreu and Savannah L de Borbon Price: ` 8,208.60No of pages: 175 pages (Hardcover)Publisher: Nova Science Publishers Inc

About the book: Marshes, both tidal and non-tidal, are productive and complex ecosystems. The water in these systems ranges from fresh, to brackish, to saline as one moves from inland to coastal areas. Marshes are an interface between upland and aquatic habitats. In this book, the authors present current research in the study of the ecology, management and conservation of marshes including the climatic roles of

marshes; the mesocosm marsh ecology of two south-western Spanish estuaries; factors conditioning the vegetation in the salt marshes of the Atlantic Coast of the Iberian Peninsula; and nutrient cycling in salt marshes.

ENVIRONMENTAL MANAGEMENT Authors: Ajith Sankar R N Price: ` 378.00No of pages: 512 pages (Paperback)Publisher: OUP India; 1st Edition

About the book: The book will be useful for students specializing in environmental management, business and sustainability, and energy management. It also arms professionals with the knowledge to take environmentally responsible business decisions.

The book attempts to create awareness about our fragile ecology and ecosystem as well as our rich biodiversity, and raises

relevant environmental issues such as pollution, deforestation, global warming and depletion of scarce natural resources

It urges us to take responsibility for saving our environment by adopting sustainable business practices, employing decision-making tools for environment management and waste management, and understanding and complying with global and Indian standards, laws, and ethical practices. A chapter on ecological economics and green economy attempts to throw light on the costs incurred due to both the damage caused as well as damage control. A careful selection of case studies, both Indian as well as global, showcases the attempts of various individuals and organizations to act in the best interests of our environment.

The book contains a rich pedagogical mix with numerous relevant images, side-bars, tables, charts, exhaustive references, and key words. The chapter-end exercises contain multiple-choice questions, short and long answer type questions, and reflective questions. It also provides various take-home activities such as web readings, and recommended books, documentaries and movies.

INTRODUCTION TO ENVIRONMENT MANAGEMENT Authors: M M Sulphey and M M Safeer Price: ` 375.00No of pages: 428 pages (Paperback)Publisher: Prentice Hall India Learning Pvt Ltd; 3rd Edition

About the book: This comprehensive book brings into fore the fundamental concepts of environment management. The elegantly combined presentation of various aspects of environment, ecosystems, effects of global warming and pollution, and various ways to conserve nature and save environment, with profundity, is a highlight of this text.

The 3rd Edition, while retaining the thorough coverage of the various areas of environment management-ecology, biodiversity, degradation of environment, agro-ecosystem and sustaining agriculture, forest and wildlife, waste management, emerging disciplines in environmental management, environment legislation, ethical aspects of environment-throws light on a new chapter on Ecological Dynamics and Human Influence that discusses the various environmentally significant behaviour, including environmental activism, eco-terrorism, bio-terrorism, agro-terrorism, ecotage, Green Scare, and environmental refugee.

Designed as a textbook for the postgraduate students of management, this book can be equally useful for the undergraduate students of all disciplines.

Bookshelf.indd 55 16-09-2015 10:43:02

Pro

duc

t In

dex

Product Index

Pro

duc

t In

dex

Pro

duc

t In

dex

AAgitated Nutsch Filter/Dryer 36

Air Pollution Control 25

Air Pollution Control Equipment 26

Alarm Annunciators 36

Aluminium Profile System 36

Auto Backwash Filter 46

Automatic Potentiometric Titrator 35

BBack Pressure Regulating Valves 45

CClamp-on Ultrasonic Flowmeters 47

Coke Oven Waste Water Treatment 29

Composite Sampler 40

Computerised LCRTZ Test System 30

Continuous Agitated Fluid Bed Dryer 44

Control & Signalling Devices 30

Controls and Digital Readouts for Machine Tools 42

Core Package Drilling Machine 32

DDigital Soft Starters 43

Display Board 37

Double Cartridge Seals 41

Double Cone Blender 34

Dual Cartridge Filter Units 37

EEffluent Water Treatment 23

FFilter Press for Waste Water Treatment 28

HHelical Gearboxes 30

IIndexer Packages 31

Inductive Linear Position Transducers 43

Industrial Plugs & Socket 37

Industrial Waste Water Treatment 24

Infrared Halogen Heater 45

IP-65 Stepper Motors 35

LLiquid Ring Compressors 35

Low Voltage Inverter 31

MMagnetic Stirrers 45

Manual Top Discharge Centrifuge 33

Membrane-based Water & Waste Water Treatment Plant 28

Municipal Waste Water Treatment 25


Prod

uct Index

Pro

duct Ind

ex

OOmni Programmable Tissue Homogeniser (PDH 32

Oxygen Analysers 46

PPneumatic Actuator 44

Pneumatic Lifter 39

Pool Test Application Instrument 43

Portable Emissions Analyser 33

Pressure Gauges & Differential Pressure Gauges 38

Pressure Nutsche Filter 42

Pressure Reduction and De-superheating Station 38

Pressure Relief Valves 38

RReal-time Light Hydrocarbon Gas Analyser 40

SSafety Light Curtain 33

Sensors & Modules 33

Septa & Bottle Stopper 42

Sewage Waste Water Treatment 22

Sewage Water Treatment Plants 23

Silicone Rubber Sheets 40

Single Girder Crane 41

Single Stage Rotary Vane Vacuum Pumps 39

Solar Powered Pumps 47

SS Small Scale Spray Dryer 39

Stirrer, Pneumatic Stirrer 46

SVP/LVP Mixing Vessel 32

TTemperature Sensors 32

Thermocouples 31

Tubular Level Indicator 41

UUltra-high Resolution Lens 34

VVector Control Inverter 31

Vent Filter Air Pollution Control 26

Vortex Flow Meter 34

WWaste & Waste Water Treatment 22

Waste Water Treatment 22




Waste Water Treatment Plant 27







Waste Water Treatment Plants 22



Waste Water Treatment Systems 23


Water & Waste Water Treatment 28

Water Recycling Plants 25

Water Treatment System 29


Indices


Sr. Company Name Page No.1 Arvind Anticor Ltd 9

2 Dipflon Engineering Co 3

3 Emjay Engineers 134 Forbes Marshall Inside Cover I5 KSB Pumps Inside Cover II

6 Oriental Nicco Project Pvt Ltd 117 Polyplast Chemie Plants (I) Pvt Ltd 78 Spectralab Instruments Pvt Ltd 99 UNP Polyvalves (India) Pvt Ltd 510 Venus Trading Company 1311 Chemtech Events Back Cover

ADVERTISE TO EXPAND

your reach throughIN

SIG

HT

IN

TO

TH

E P

HA

RM

AC

EU

TIC

AL

AN

D B

IOT

EC

H I

ND

US

TR

IES

For Details Contact


Taj Building, 3rd Floor, 210 Dr D N Road, Fort, Mumbai - 400 001Tel: 022-4037 3636, Fax: 022-4037 3635Email: [email protected]


Advertisers’ IndexIndices

Ad Index.indd 58 16-09-2015 16:36:11

R.N.I. No. 39849/82. Date of Publication: 23rd of every month. Postal Registration No: MCS/096/2015-17 Posted at Patrika Channel Sorting Office, Mumbai 400001, on 23rd & 24th of every month.Total Page No: 60

Date post:	29-Jul-2016
Category:	Documents
Upload:	cpf
View:	244 times
Download:	4 times

Chemical Products Finder September 2015

Documents