Trane’s Self-Rinsing Evaporator Coil Cleaner is odorless, non-toxic, deodorizes, and doesn’t etch or react with aluminum.
Evap Pow’r - No-rinse alkaline
Evap Foam - Foaming, no-rinse aerosol
Evap Fresh - one-step cleaner/disinfectant
The Mini Split First Aid Kit™ - aerosol versions of Micro Coil Clean and BBJ Mold Control for HVAC Systems.
Triple-D™ - Universal Cleaner for use on condenser/evap coils
Pro-Green™ - no rinse, mild alkaline coil cleaner that can be used on condenser/evaporators, electronic/permanent filters, fan blades, grilles, mini-split and microchannel applications.
BBJ Power Coil Clean™ - Fast and safe coil cleaner that cleans and protects coils during cleaning. Use Power Coil Clean to remove dirt and grime effectively and safely from evaporator and condenser coils.
Viper Coil Cleaner - Does not contain any hazardous ingredients. No need to rinse the evaporator. Condenser only needs a light water rinse for minimal clean-up.
Green Clean - Environmentally friendly all purpose cleaner
Blackhawk - Expanding foam, non-fragrance aerosol
TRI-POW’R - is a heavy duty alkaline cleaner that is very unique when compared to other similar alkaline coil cleaners.
MT-73018 Drain Guard “MAX” Primary Line Tee 3/4” Drain
MC-08118 Drain Guard “MAX” 12 Month Refill 2 Pack
Drain Solve is an alkaline-based drain opener which removes grease, hair and other organic matter. It is non-fuming and it will clean and clear drains quickly.
New Line helps prevent drain line clogs and water leaks by removing slime buildup and keeping drain lines open. Use it every three months to help prevent A/C drain line blockages.
Condensate Management SF™ pan treatments use state-of-the-art, water-activated, time-released polymer technology and may be used safely in air conditioner and refrigerator drain pans, dehumidifier water tanks or any other non-potable water retention area. With the effective use of drain pan treatments, condensate water will be sanitized, discouraging the growth of micro-organisms and keeping drain pans clean and free flowing.
BBJ Mold Control - Controls growth of mold/mildew. Apply after physical cleaning and sanitizing to inhibit growth.
MMR II is a commercial grade hard surface cleaner/ mold remover.
Sani C-N-D is an EPA registered disinfectant, fungicide, mildewstat and viricide. It destroys “Dirty Sock” mildew & other malodors.
DUCT FRESH Spray deodorizes and sanitizes air duct and surfaces.
Bio-Fresh CD is a bacteriostat, fungistat and deodorizer based on chlorine dioxide technology. Controls bacteria-mold-mildew-fungi and yeast in/on HVACR equipment.
Oxine Low Toxicity Duct Fungicide is sprayed into a duct using a fogger. Kills any residual mold, bacteria, mildew, viruses, and fungi.
EnviroCON® Effective in eliminating odor-causing microorganisms as well as those associated with mold, mildew and bacterial growth. Chlorine dioxide is a powerful antimicrobial compound effective against gram-positive and gram-negative organisms, as well as yeasts and molds.
Drain Guard - The one-time installation of the Drain Guard T-body assembly with a slow releasing formula provides up to six months of drain protection.
PurCool Strips - PurCool Strips will adhere to the drain pan and will not float or move. Safe for metal and plastic drain pans. Lasts for up to six months.
Gel Tabs are formulated with a breakthrough gel locking technology for treating air conditioning drain pans and lines.
The Flow Plus™ product is a preventative and long lasting pan treatment. It time releases a chemical formula that minimizes the accumulation of slime and environmental debris. It is completely soluble. It does not leave a carrier product (mesh, bag, etc.) to be clogged in the drain line.
FreshDuct Odor Eliminator is a powerful odor eliminator for use in HVAC systems, mold remediation projects.
322BP Cool Air AC Smartseal Quickshot Kit Up to 6 Tons
322 Cool Air AC Smartseal Quickshot Refill Up to 6 Tons
210 Cool Air AC Smartseal External Up to 5 mm. Leak
TR1180-01 Cool Air "FIX QUICK" Coil Repair Up to 1 mm. Leak
A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system. It is easily injected into the system, traveling with the refrigerant, searching for leaks.
EasySeal Direct Inject pumping down the unit is a thing of the past. Now the industry’s leading sealant has been combined with leak detection dye to give you EasySeal Direct Inject-UV.
RLF-8 comes with a dab-applicator. Radiant color & viscous formula exposes the smallest leaks. Freeze protected effective down to 0° F.
An easy way to locate gas leaks from any pressurized gas system. Thick fluid clings to surfaces even the underside of pipes, and produces a long lasting stream of bubbles.
EZ-Ject™ cartridges are versatile, and multi-dose. The injector easily overcomes system pressure. Add fluorescent dye with system off or running.
GLO-STICK® capsules are mess-free and single-dose. Add refrigerant & fluorescent dye in one step.
Item # Cartridges & Capsules Treats Brand SPE-GSDS-CS Glo-Seal Stick UV Dye and Sealant Capsule Up to 3.5 Tons
SPE-EZDS-CS Glo-Seal Stick UV Dye and Sealant Cartridge Up to 3.5 Tons
SPE-EZDSK-CS Glo-Seal Stick UV Dye and Sealant Kit Up to 7 Tons
CS-1CS Cool Seal™ EZ-Ject™ cartridge Up to 2 Tons
CS-3CS Cool Seal Capsule Up to 2 Tons
CS-100CS EZ-Ject™ Cool Sealer Injection Kit
BV-50 Bleed Valve for GLO-STICK Capsules
GLO Seal™ pinpoints the exact location of leak areas and seals micro-leaks from the inside making it a robust find-and-fix solution for AC&R systems.
EZ-Ject™ cartridges are versatile, and multi-dose. The injector easily overcomes system pressure. Add fluorescent dye with system off or running.
GLO-STICK® capsules are mess-free and single-dose. Add refrigerant & fluorescent dye in 1 step.
AC/ SmartSeal is ideal for pinhole repairs and is a 100% green product.
AC/SmartSeal External is a leak stop for any material. Seals leaks and Sets up in minutes.
Fix Quick is a new fast leak stop specifically formulated to repair in 20 seconds on flat and curved surfaces.
Fluorescent Gas Leak Detector is a complete product. Not only does it detect the smallest leak.
Big Blu - The Original Big Blu leak detector is used by industry professionals worldwide. This is the only bubble solution capable of detecting gas leakage down to 0.65 ounces per year.
5
Drain Pan Epoxy & Repair
System Flushing Products Brand Item # Vendor # Description Size
CHM00510 4300-09 16 oz. Rx11 Flush
CHM00410 4300-11 32 oz.
CHM00826 4300-08 Starter Kit - Hose / Gun / Valve / Can 16 oz.
CHM00997 4300-30 Non-Pressurized Liquid Flush 19.5 oz.
TOL03326 4300-51 Rx11 Flush Gun Nozzle
HSE01611 4300-52 Rx11 Flush Hose
TOL02895 4300-50 Rx11 Line Set Cone Flush Tool
TOL03481 4300-89 4300-89 Rx11 Injection Valve
CLEAN SHOT-5 CSSF-05 Clean Shot System Flush
up to 20 Ton System 5 lbs.
PF-KIT Pro-Flush Kit Kit
PF-16 Pro-Flush Flushing Solvent 16 oz.
981 Super Change - Up To 6 Tons 2 oz.
Pro-Flush is a flushing solvent for AC and refrigeration systems, compatible with all refrigerants and oils. The reusable tank lowers cost when you buy the refill cans.
Brand Item # Description
QT2000 Quick Check 2 Second Acid Test
CHM00413 4301-02 Rx Acid Scavenger
CHM00995 4301-05 Rx Acid Scavenger—Pressurized
45004 Rectorseal Acid Away Kit - Mineral Oil
45009 Rectorseal Acid Away Kit - POE Oil
1175 Cool Air N0-Acid—Acid Neutralizer
RK1349S1 Cool Air Acid-Test Universal Kit
AB-100CS Acid Buster™ Scavenging Injection Kit
AB-5CS Acid Buster™ EZ-Ject™ cartridge
CHM00414 Universal Acid Alert Test
Acid & Burnout Chemicals
Brand Item # Vendor # Description Coverage
2000-1PG PanSeal Gallons 160 Sq. Ft @ 10mils.
2000-PC PanSeal Cartridges 6 Sq. Ft @ 15mils.
CHM00492 4296-50 Nu-Calgon White Pan Spray
Pan Seal seals leaks immediately. Ideal for drain pans and cooling towers - works on most surfaces.
QT2000 Detects inorganic acid in 2-seconds down to 1 part per million. Unique patented disposable design.
Acid Buster™ is formulated for use with all lubricants - mineral, alkylbenzene and polyol ester. Direct, reusable injector eliminates the need for an oil pump. Works with the Spectroline EZ-Ject injector tool.
Super Change™ is the fast and easy way to complete an R22 system retrofit. It creates a strong compatibility link between all oils to any HFC refrigerants, including POE-based R407C & R410A – eliminating compressor downtime and line set flush.
Provides indication of the acid level. Phase separation of the chemicals eliminates interference from discolored oil.
Rx-Acid Scavenger is formulated for use with all lubricants - mineral, alkylbenzene and polyol ester.
Acid-Away® circulates quickly throughout the system and chemically neutralizes acids that are always left in an air conditioning or refrigeration system after a burnout occurs.
No Acid - Eliminates acid residues and stabilizes the PH level of the lubricant and even neutralizes the acid in the recovery station.
Acid-Test - Is an essential product detect the presence and the formation of acid in you HVAC system. Works with all HVAC oils.
Tools, valves and fittings - These convenient line of accessories make easy use of an assortment of NuCalgon pressurized and no-pressurized chemical applications.
Rx11-flush is ozone-safe, non-toxic, and non-flammable. It is powerful enough to flush away sludge, carbon residues, oils, acids, water and other particulate. Ideal for system flushing after burnouts, during retrofits and for flushing line sets.
Pan-Spray is a aerosol rubberized coating no chipping/flaking or peeling Repair leaky drain pans, cooling towers.
Clean Shot™ system flush is an ozone safe, nontoxic, liquefied gas, HFC solution designed to remove impurities, contaminants, and debris.
Descaling Chemicals RYDLYME is specifically designed to dissolve the toughest water scale, lime/mud and rust deposits from virtually any piece of water based equipment. This powerful, yet totally safe, liquid is non-toxic, non-flammable, non-hazardous, non-corrosive and biodegradable; so it will not harm your personnel, equipment or our environment.
This Premium low foaming descaler is perfect for maintaining cooling towers and water cooled systems.
Brand Item # Description Viscosity Size OIL00015 OEM Formula Compressor Oil 300 SUS 1 gal.
OIL00022 White Mineral Centrifugal Oil 300 SUS 2.5 gal.
OIL00031 Oil w/ Wear Additive 300 SUS 1 gal.
OIL00042 Oil w/ Lubricity Additive
150 SUS 1 gal.
OIL00045 300 SUS 1 gal.
MIN015001 150 SUS 1 gal. Mineral Refrigeration Oil
MIN015005 150 SUS 5 gal.
Item # Description Size Brand
CHM00834 Additive/Lubricant for R-22 / R-407C / R-410A 4 oz.
CHM01394 MJ-X LT Oil Additive 4 oz.
Mineral Oil - For use with CFC & HCFC Refrigerants
Trane Approved mineral oil is specially recommended for lubrication of compressors containing ammonia, R-11, 12, 13, 22, 113, 114, 123, 500 and 502. Do not use with HFC refrigerants such as R-134A.
Vacuum Pump Oil
Trane Approved POE oil is recommended for lubrication of compressors containing R-134a, R-404A, R-507, R-407C, R-32, and R-410A.
Refrigeration Lubricant POE RL23HB OIL00080 ISO 32 1 gal.
OIL00094 Refrigeration Lubricant POE 32-3MA 300 SUS 1 qt.
OIL00048 POE Refrigerant Oil (ISO 68) 300 SUS 1 gal.
Oil Additives
Appion Premium Synthetic Blend improves vacuum pump performance and provides greater protection to internal pump components. It also lasts up to 8 times longer than mineral oil.
Oil Pumps and Accessories Item # Vendor # Description Brand
Oil pumps and injector can make a tough job clean and easy in commercial or residential applications
Nickel-Safe Ice Machine Cleaner is a food-grade product for removing scale deposits from ice makers with nickel-plated or tin-plated evaporators.
Start to Finish Mineral oil is the highest quality available anywhere. OEM approved with excellent low temperature properties.
POE Oil - For use with HFC Refrigerants
Refined with excellent thermal stability for maximum efficiency in any vacuum pump. ISO Viscosity Grade 46.
A/C Re-New provides significant saving in energy use. It quiets noisy systems and extends system life. This lubricant blends with the system oil, lasting for the life of the equipment, or until the oil is changed.
SEL00490 LOCTITE® 242™ Blue Liquid Threadlocker 1.3 oz.
SOV00004 LOCTITE® SF790 Chisel Gasket Remover 18 oz.
13228 Dow Corning High Vacuum Grease 150g
107408 Honeywell Heat Conductive Compound 4 oz.
4036 Airserco Liqui-Vac High Vacuum Sealant 1 Pint
CLL-1 General Purpose Thread Sealant Tube 1.3 oz.
RT200R Nylog RED Sealant for CFC/HCFC Systems 30 ml.
RT201B Nylog BLUE Sealant for all Systems 30 ml.
RT201BP Nylog BLUE Sealant for all Systems - 2pk. 30 ml.
Thread & Gasket Solutions
Conductive paste is ideal for optimizing thermistors and sensor wells to improve and assure proper temperature readings.
Liqui-Vac - Seal high vacuum leaks around threads, through flared connections, or wherever metal joins metal. Sealant remains flexible for easy disconnection.
Dow Vacuum Grease - Lubricates plug valves/control valves/ flow meter bearings/synthetic rubber gaskets and seals in high temperature applications. Seals vacuum and pressure systems.
Glycol-water mixtures are commonly used to provide freeze protection in closed loop heating and cooling systems. Glycol is also used to allow low temperature operation in thermal energy storage systems, where ice is made at night and used the next day to cool the building.
SL3190 STA-PLEX Premium Red Grease Cartridge 14 oz.
SLV051201 Trane E-Solv Degreasing Solvent Chemical 1 gal.
SOV00045 Nu-Calgon Degreasing Solvent EF Aerosol 17 oz.
SOV00046 Nu-Calgon Degreasing Solvent EF 1 gal.
Item # Description Size CO-1 Pull-a-Spout Oiler 4 oz.
CR-1 Rust Breaker 4 oz.
LUB00007 Loctite 76732 Silver Grade Anti-Seize 8 oz.
Lubricants, Cleaners & Degreasers
E-SOLV cleans electric motors, machined parts, coils, breakers, and other components. It is a safer alternative to chlorinated solvents.
Loctite Provides solutions for large and small projects, for complex or simple fixes 515 Gasket Eliminator/242 Threadlocker and SF790 Gasket remover helps get your important jobs done right.
Pro-Tite is formulated for use on metals and plastics. Impervious to most chemicals including refrigerants/petroleum products etc. Alcohol based.
Nylog Red/Blue - Gaskets/threaded connections coated with Nylog will block high pressure leaks by forming a hydraulic seal. Nylog can be used an assembly lube when installing shaft seals, o-rings, schraeder valves, ball valves, or other internal system components.
CRC - Chemical Solutions to Keep You Moving™. Professionals and do-it-yourselfers have relied on CRC for superior quality specialty chemical products to solve their general maintenance and repair needs since 1958. CRC highly-specialized formulas are developed to meet the unique needs of the automotive, industrial, electrical, marine, heavy truck, hardware and aviation markets.
Nu-Calgon Solvent EF is an environmentally friendly, ozone-safe, volatile solvent. It provides effective cleaning and controlled drying with no residue. Dielectric strength of over 26,000v.
GG-12 C02 Cartridges for Gallo Gun - 12pk GG-1A Gallo Gun Nozzle Adapter Kit for PVC 97795 Mighty Pump
The Gallo Gun is a lightweight (3 oz.) portable tool designed to blowout drain lines instantly. The cartridges now deliver 1200 PSI of oil-free CO2 to clear the line. Each unit comes equipped with a tapered fitting to work on 3/8” - 3/4” drain openings.
Mighty Pump clears drains with a powerful push/pull action from inside or outside of the building.
SEL01212 MSB-07-1 Replacement Low-Tack Bib Tape - 4” x 200’
1002
BS-32 2601
DST00857
Item # Description Unit Info Size Brand PAI00061 Commercial Executive Beige CVHE, CVHF, CVHG, CVHH, CVHS, CVHF, RAUC, RTHA, RTHC 12 oz. PAI00074 Residential Slate Gray 2-4TTB, 2-4TWB 2-4TTA, 2-4TWA, TCC, WCC, 2-4TCC, 2-4WCC, TWE 12 oz. PAI00086 Commercial Slate Gray YSC, TSC, WCS,TCD, 12 oz. PAI00246 Residential Tarpaulin Gray 2TTZ, 4TTZ, 2TTX, 2TTR, 4TTR 12 oz. PAI00248 Residential Anthracite Gray GAM & TAM Air Handlers 12 oz.
Item # Description Size V2404 General Purpose Black Spray Paint 12 oz.
18412 CRC Zinc-It Cold Galvanize Coating 12 oz.
GLYPAL Glyptal Red Enamel Insulating Paint 12 oz.
Glyptal was originally produced as an insulating coating for the treatment of coils and armatures, its outstanding resistance to corrosion, moisture, heat, acid, oil and dust has seen it employed in numerous industries as a adhesive, primer, sealer and protective finish.
OEM Touch-Up Paint
General Purpose & Insulating Paints
Chemical Tools & Supplies
97795
Sprayers, Pumps, Foggers and More
Coil Coating Aerosols Item # Description Size Brand 80400 GulfCoat Corrosion Protection - Clear 12 oz. 80401 GulfCoat Corrosion Protection - Blue 12 oz.
Sweat-Free is a spray-on insulation for cold water pipes, refrigeration and air conditioning lines. Stops sweating and dripping problems. Dries to a white, flexible and water-resistant coating. Adheres to galvanized, black iron, steel, brass, copper and PVC piping.
Wasp & Hornet Spray Instant knockdown formula kills wasps, hornets, yellow jackets on contact. Jet blast up to 22 feet lets you spray from a safe distance. Non-conductive up to 47,300 volts. Residual action kills wasps and hornets returning to the nest. For Outdoor use only.
TOL00201
MSB-KIT Includes bib/adjustable mounting brackets & 5 gallon bucket. Covers ductless unit up to 44” wide. Keeps walls and surroundings clean from overspray.
2602
Coil Gun - No pre-mixing as chemical and water are automatically blended in mixing head as you spray.
JET GUN is a practical portable high-pressure water jet machine with shoulder strap specifically designed be used indifferently with acid/alkaline cleaners, and water for cleaning indoor and outdoor equipment.
GulfCoat Blue and Clear corrosion resistant coatings are specifically designed for the protection of HVAC coils and components.
