Date post: | 02-Mar-2018 |
Category: |
Documents |
Upload: | abraham-imam-muttaqin |
View: | 237 times |
Download: | 1 times |
of 12
7/26/2019 Chockfast Product
1/12
ProductOverviewEngineered Epoxy Systems
for Industrial Application
Worldwide
This page will help you become familiarwith the ChockfastFoundation SystemFamily of Products
Since 1959, ITWPhiladelphia Resinshas beenproviding solutions to difficult problems with
a complete line of epoxy products:
Grouting & Chocking Compounds
Auxiliary Products Adhesives and Repair Compounds Primers & Solvents Floor Systems & Speciality Coatings Secondary Containment Systems &
Chemical Resistant Coatings
Grouting & Chocking Compounds
High performance grouting and chocking systems for
machinery installation and foundation repair.
Find these products fast:
ChockfastRed ChockfastRed SG ChockfastBlue
ChockfastOrange
ChockfastBlack ChockfastGray ChockfastChock-Crete
Hot-Running Compressor installed withChockfast Foundation Systems
Chockfast Red Chockfast Red Advantages
Multi-purpose, high strength, deep-pourepoxy grout for fast, permanentalignment of reciprocating and rotating
equipment; also used as a polymerconcrete for fast reconstruction of wornor damaged foundations. ChockfastRed provides excellent vibrationdamping for static and dynamic loads,while its gentle exothermic cure allowsfor single pours from 2" to 18.
CHOCKFAST RED is a user-friendly, chemically resistant, low dusting epoxy grout withhigh compressive, tensile and shear strengths. Excellent compatibility with concrete andsteel minimizes or eliminates horizontal bond-line cracks, common to traditional epoxygrouts. This 24-hr cure structural epoxy is formulated to provide excellent vibration
damping for static and dynamic loads plus permanent monolithic support with intimatecontact between equipment bedplates and underlying concrete foundations. A gentleexothermic reaction during cure reduces cast-in stresses and allows single pours up to18. (For single pours deeper then 18, contact a CHOCKFAST Representative.) Deeppours expedite installation of new equipment. They also reduce costly downtime forfoundation repairs. Low dusting formulation simplifies installation and cleanupprocedures. Tools and mortar mixers can be cleaned with water.
7/26/2019 Chockfast Product
2/12
Turbo generator: Installed on thick-pour ChockfastRed and oil-resistant Chockfast Blue
Chockfast Red SG
PRODUCT APPLICATION AND INSTALLATION GUIDES
TECHNICAL BULLETINS
Bulletin # 559- Deep Pour CHOCKFAST RED VS CONCRETE
Bulletin # 617Q- CHOCKFAST RED - High Strength, Deep Pour Epoxy Grout
Bulletin # 618G- CHOCKFAST RED SG - Thin Pour, Rapid Cure Epoxy Grout
Bulletin # 619- CHOCKFAST RED APPLICATIONS - Special Precautions
Bulletin # 638- CHOCKFAST RED - Compatibility with Concrete and Steel
Bulletin # 669A- CHOCKFAST RED - Extended Aggregate
Bulletin # 1024- CHOCKFAST RED AND SG - Guidelines for Storing, Mixing &Pouring
Versin espaola- Boletn #617N- Boletn #618E- Boletn CFRED_Bombas
MSDS INFORMATION
CHOCKFAST RED
CHOCKFAST RED SG
High flow, rapid cure, high strengthepoxy grout for thinner pours (1 1/2 -4) under equipment skids andbedplates. Chockfast Red SG works
well in cooler temperatures.
Back to the top
Chockfast Blue Chockfast Blue Advantages
High chemical and temperature-resistant, high flow epoxy grout for newor retrofit installations in causticenvironments. Chockfast Blue canalso be used as a substitute for steelsoleplates or rails; normally used in a
thickness range of 1-1 1/2.
CHOCKFAST BLUE is a pourable epoxy compound with excellent resistance to highoperating temperatures. Developed especially for use under hot-running reciprocating
machinery, it provides a strong cap and an excellent oil seal on new foundations.CHOCKFAST BLUE eliminates the need for steel soleplates, which often causesubsequent cracks in foundations. It also strengthens and seals older foundations, whilerestoring their original heights.
7/26/2019 Chockfast Product
3/12
Back to the top
PRODUCT APPLICATION AND INSTALLATION GUIDES
TECHNICAL BULLETINS
Bulletin # 616J- CHOCKFAST BLUE - High Temperature & Chemical Resistant Grout
Versin espaola- Boletn #616
MSDS INFORMATION
CHOCKFAST BLUE
Chockfast Orange Chockfast Orange Advantages
Conveniently pourable, two-component,structural epoxy chock that replacestediously fitted steel shims (or steel
chocks) assuring intimate contact withmachined or un-machined equipmentbedplates. Virtually 100% effectivebearing underneath supported
equipment.
CHOCKFAST ORANGE chockunder a gas compressor engine.
CHOCKFAST ORANGE is a specially formulated for use as a chocking or groutingmaterial. CHOCKFAST ORANGE is designed to withstand severe marine andindustrial environments involving a high degree of both physical and thermal shock. Thecompound is non shrinking and has very high impact and compressive strength. Years of
successful in-service experience have shown the use of CHOCKFAST ORANGE to bea far superior yet less expensive method of establishing and permanently retainingprecise equipment alignment under extreme conditions. CHOCKFAST ORANGE isapproved or accepted for its intended marine use by American Bureau of Shipping,Lloyds Register, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd and most
other major regulatory agencies worldwide.
Back to the top
PRODUCT APPLICATION AND INSTALLATION GUIDES
TECHNICAL BULLETINS
Bulletin # 659- CHOCKFAST ORANGE - Epoxy Machinery Chocking Compound
Bulletin # 665A- CHOCKFAST ORANGE HARDENER RATIO GUIDE
Versin espaola- Boletn #659- Boletn #639
MSDS INFORMATION
CHOCKFAST ORANGE
Chockfast Black Chockfast Black Advantages
7/26/2019 Chockfast Product
4/12
Pourable, two-component, deep-pourstructural epoxy chock used to supportand maintain permanent framealignment under hot-running machinery;allows free flow of air betweenequipment and foundation to lower
foundation temperatures and minimizeupward thermal growth; virtually 100%effective bearing underneath supportedequipment; normally poured in
thickness of 1 1/4-2 1/2.
PRODUCT APPLICATION AND INSTALLATIONGUIDES
TECHNICAL BULLETINS
Bulletin # 666- CHOCKFAST BLACK - Epoxy
Machinery Chocking Compound
Versin espaola- Boletn #666- Boletn #629SP
MSDS INFORMATION
CHOCKFAST BLACK
CHOCKFAST BLACK is a cost effective method of maintaining permanent precisealignment of critical equipment. It will withstand severe environments involving highphysical and thermal shock. CHOCKFAST is ideal for use under hot runningreciprocating and rotating machinery due to its excellent resistance to creep and fatigueat high operating temperatures. It is non shrinking and has a very high impact andcompressive strength. Since these resin chocks (1) minimize heat build-up onfoundations, (2) assure precise and unsurpassed contact with bedplates, and (3) providea high coefficient of friction to help hold engines down tight...they reduce possible
bearing or crankshaft damage.
CHOCKFASTBLACK providea highcoefficient offriction tomaintain
alignment.
Backto the top
Chockfast Gray Chockfast Gray Advantages
Highly flowable, two-component, thinpour chock designed to maintainproper alignment and support ofmachinery and equipment; able towithstand severe industrialenvironments with a high degree of both
physical and thermal shock resistance.
PRODUCT APPLICATION AND INSTALLATIONGUIDES
TECHNICAL BULLETINS
Bulletin # 656- CHOCKFAST GRAY - AuxiliaryEquipment Chocking Compound
MSDS INFORMATION
CHOCKFAST GRAY
CHOCKFAST Gray was developed as a chocking or grouting compound for use undermarine deck machinery, pumps, generators and steering gears. Industrially, thecompound is used under diesel engines, generators, compressors, pumps, turbines,bearing blocks, crane rails and numerous other applications. CHOCKFAST Grayrequires no special tools or special skills as does chocking with steel. When cast,CHOCKFAST Gray flows readily into chock area filling all voids and conforming to allirregularities. This eliminates the machining of base plates or foundations for a perfectlyfitted chock.
Conveyer Pierssupported onCHOCKFASTGray
Backto the top
Chockfast Chock-Crete Chock-Crete
High performance, precision non-shrink
cement grout.
CHOCK-CRETE is a high performance, non-shrink, precision grout that meets or
exceeds all requirements of the Corps of Engineers CRD C-621 and ASTM C-1107. It isdesigned for a wide range of consistencies from damp pack to high fluidity which meetsthe most demanding job conditions. It is recommended for grouting of anchor bolts,
7/26/2019 Chockfast Product
5/12
PRODUCT APPLICATION AND INSTALLATIONGUIDES
TECHNICAL BULLETINS
Bulletin # 625- CHOCK-CRETE - HighPerformance, Non-Shrink Cement Grout
MSDS INFORMATION
CHOCK-CRETE
baseplates, structural steel and precast columns, dowels, etc. which require non shrink,high tolerance, high strength performance. It is flowable for easy placement, adhereswell to concrete or steel, and exhibits good impact and vibration characteristics.
Back to the top
PRODUCT APPLICATION AND INSTALLATION GUIDES FORENGINEERED CHOCKFAST GROUTING & CHOCKING COMPOUNDS
TECHNICAL BULLETINS
Bulletin # 615B- GROUTING LARGE ANCHOR BOLTS
Bulletin # 639- MAINTENANCE OF ALIGNMENT FROM CHOCKFAST RESIN CHOCKS
Bulletin # 642- CHOCKFAST INSTALLATION PROCEDURE - Industrial Applications
Bulletin # 643- STANDARDIZED CHOCKFAST DESIGN FOR INTEGRAL GAS ENGINE COMPRESSORS
Bulletin # 660- COMMON HOLD DOWN BOLT ARRANGEMENTS
Bulletin # 661E- RESIN INJECTION INTO CRACKS IN CONCRETE
Bulletin # 662C- CHOCKFAST EXPANSION JOINT
Bulletin # 663A- PHYSICAL SPECIFICATIONS FOR EPOXY GROUTS
Bulletin # 667- EFFECT OF CHOCK DESIGN ON FOUNDATION OPERATING TEMPERATURE
Bulletin # 675- CHEMICAL RESISTANCE CHART
Bulletin # 691- CALCULATED ANCHOR BOLT PULL
Bulletin # 814- ITW PHILADELPHIA RESINS RELEASE AGENT
Bulletin # 1016- COMPARISON OF PHYSICAL CHARACTERISTICS - Grouting Compounds
Versin espaola- Boletn #639
Auxiliary Products
Auxiliary Products by ITW Philadelphia Resins are a system of epoxy products used for the general
maintenance and repair of industrial and commercial applications.
Auxiliary Products have a wide array of uses are often used in conjunction with other ITW Philadelphia ResinsProducts for repairs to concrete floors and machinery foundations. They are easy to prepare and provide quick,permanent solutions to your maintenance and repair problems.
TECHNICAL BULLETINS
Bulletin #1018Elastomeric Expansion Joint Compounds
Bulletin # 1015Fairing Compounds
Bulletin #1014Concrete Adhesive
Bulletin #1019/ Bulletin #1020Trowelable Floor Resurfacers(standard and acid resistant versions)
Bulletin #1021DRust Inhibitive Primers
Epoxy Floor Resurfacers
7/26/2019 Chockfast Product
6/12
Impax 5020 Floor Resurfacer andImpax 5020AR Acid-Resistant Floor ResurfacerImpax 5020 is a three component, trowelable epoxysurfacing and leveling compound for new or oldconcrete floors where a high degree of chemical andabrasion resistance is required. The physical
properties of Impax 5020 Floor Resurfacer are muchgreater than concrete. Excellent abrasion and impactresistance recommend it for high traffic areas. Its100% reactive epoxy formulation conforms to presentOSHA and USDA requirements, permittingapplications in any food processing facility. Thisseamless resurfacer provides a barrier to bacterialgrowth and is designed for use where a sanitary,
chemical resistant, anti-skid floor is required.
TECHNICAL BULLETINS
Bulletin # 1019- IMPAX 5020 TROWELABLE FLOORRESURFACER
Bulletin # 1020- IMPAX 5020AR ACID-RESISTANT FLOORRESURFACER
Bulletin # 679D- IMPAX 5020AR CHEMICAL RESISTANCE CHART
MSDS INFORMATION
IMPAX 5020FLOOR RESURFACER CEMENT AGGREGATE
IMPAX 5020FLOOR RESURFACER DECK GRAY AGGREGATE
IMPAX 5020RESIN AND HARDENER
IMPAX 5020FLOOR RESURFACER HAZE GRAY AGGREGATE
IMPAX 5020FLOOR RESURFACER TILE RED AGGREGATE
IMPAX 5020ARACID RESISTANT FLOOR RESURFACER RESINAND HARDENER
Impax 5020 Floor Resurfacer is also available in an
acid-resistance version.
For detailed information, see Philadelphia ResinsBulletin #1019 and #1020
Back to the top
Adhesives and Repair Compounds
Super Repair Products manufactured by ITWPhiladelphia Resins provide tough, long-lastingspecialty repairs for a wide array of industrial andcommercial applications in aviation, chemicalprocessing, mining, pulp & paper, refining and allother industries. Super Repair Products are
engineered to:
Rebuild worn or damaged metal surfaces
Extend the life of new or reconditioned
equipment
Resist abrasion, impact, cavitations, corrosion,
erosion and chemical attack
Super Repair Products are easy to use with
convenient application to vertical, curved or overheadsurfaces. No heat, pressure or special tools areneeded to create an integral bond between these
7/26/2019 Chockfast Product
7/12
materials and the applied surfaces.
Back to the top
TECHNICAL BULLETINS
Bulletin # 672A- ITW PHILADELPHIA RESINS EXPANSION JOINT COMPOUND ESTIMATING CHART
Bulletin # 819- SUPER CERAMIC REPAIR LIQUID - Ceramic Abrasion & Erosion Resistant Coating
Bulletin # 820- SUPER ALLOY TITANIUM REPAIR COMPOUND - Machinable, Titanium Repair Putty
Bulletin # 821- SUPER CERAMIC REPAIR PUTTY - Ceramic Abrasion & Erosion Resistant Putty
Bulletin # 822A- Comparison of Physical Properties between SUPER ALLOY and Competitive Material
Bulletin # 913- WEAREX ARC - Abrasion Resistant Compound
Bulletin #965- PHILLYBOND # 6 - High Temperature Epoxy Putty
Bulletin # 1014- ITW PRC CONCRETE ADHESIVE *(Formerly Phillybond 1775/620TS)
Bulletin # 1015- ITW PRC REPAIR COMPOUND *(Formerly Phillybond Blue 6A)
Bulletin # 1018- ITW PRC EXPANSION JOINT COMPOUND *(Formerly Phillybond 7C)
MSDS INFORMATION
WEAREX ARC
PHILLYBOND #6
EXPANSION JOINT COMPOUND* (Formerly Phillybond 7C) COLOR BLUE DISCONTINUED
CONCRETE ADHESIVE, 1 GAL UNIT* (Formerly Phillybond 1775/620TS)
REPAIR COMPOUND, * (Formerly Phillybond Blue 6A)
SUPER CERAMIC REPAIR PUTTY
SUPER ALLOY TITANIUM REPAIR PUTTY
Primers & Solvents
7/26/2019 Chockfast Product
8/12
Primers & Solvents are a system of preparation products used in association with the following ITW
Philadelphia Resins products:
Engineered Grouting & Chocking Compounds ITW Philadelphia Resins Auxiliary Products
Adhesives and Repair Compounds Specialty Coatings Secondary Containment and Chemical Resistance Coatings
Our primers are two-component, high solids, zero VOC coatings that may be used alone to protect or sealmaterials like concrete, steel, wood and masonry or as an undercoating to enhance adhesion of top coatingsand resurfacers.
Our solvents enhance bonding of epoxies applied to any surface by removing petroleum - based materials andother foreign products. They may be used for clean up of tools and equipment or to thin some coating products.
Back to the top
TECHNICAL BULLETINS
Bulletin # 812- IMPAX 33 PRIMER - 100% Solids Epoxy Primer
Bulletin # 848- IMPAX WATER-BASED EPOXY PRIMER GRAY
Bulletin # 849C- IMPAX WATER-BASED EPOXY PRIMER CLEAR
Bulletin # 859A- IMPAX IXT-59 SOLVENT
Bulletin # 1021- ITW PRC RUST INHIBITIVE PRIMER HS
MSDS INFORMATION
IMPAX 33 PRIMER
RUST INHIBITIVE PRIMER HS
IMPAX WATER BASED GRAY PRIMER
IMPAX WATER BASED CLEAR PRIMER
IMPAX IXT-59 SOLVENT
Floor Systems & Speciality Coatings
Floor Systems & Specialty Coatings manufactured
by ITW Philadelphia Resins provide tough, long-lasting solutions to new and existing floors subject toheavy traffic use, chemical attack and severe
environmental conditions.
Exceptional abrasion, corrosion and impact resistanceprovide considerable versatility with a wide array ofindustrial and commercial applications inwater/wastewater treatment plants, petroleumfacilities, pulp & paper mills, mining operations,chemical plants, hospitals, manufacturing areas andothers.
Heavy Duty Non-Skid Coatings
7/26/2019 Chockfast Product
9/12
IMPAX 2001 High-Solids Epoxy CoatingPhillyclad 2001 is a heavy-duty, interior/exterior, two component, catalyzed epoxy coating formulated fordemanding industrial applications. Cures rapidly to a tough, semi-gloss finish with excellent resistance to alkali,abrasion, corrosion and chemical attack. It meets USDA standards for maintenance protective coatings not indirect contact with food in federally inspected meat and poultry plants.
For more detailed information, see Philadelphia Resins Technical Bulletin # 1022
TECHNICAL BULLETINS
Bulletin # 1022- IMPAX 2001- High Solids General Purpose Epoxy Coating
MSDS INFORMATION
IMPAX 2001 - Deck Gray, Haze Gray, Red, Safety Yellow, Sandstone
IMPAX 200 Urethane Nonskid CoatingIMPAX 200 is a two component, moisture curednonskid urethane coating available in one grit size andsix colors. It is a tough, long wearing, protectivecoating that provides safe footing and excellenttraction for personnel and equipment. IMPAX 200can be applied at low temperatures (400F/40C), curesquickly and provides a flexible, UV resistant film.Recommended industrial uses include work areas,ramps, loading docks, walkways, industrial flooring,machinery spaces, tank roofs, steps, etc.For detailed information, request Philadelphia Resins'Bulletin #969.
TECHNICAL BULLETINS
Bulletin # 969H- IMPAX 200 NON SKID - Urethane, Heavy Duty Non-Skid Coating
MSDS INFORMATION
IMPAX 200 - GRAY, BLACK, GREEN, RED
IMPAX 300 Epoxy Nonskid CoatingIMPAX 300 is a catalyzed epoxy nonskid coating
that exhibits superior chemical resistance to acids,alkali's, solvents, fuels, etc. It is available in one gritsize and six colors and is recommended forenvironments where a tough, chemically resistant,heavy duty nonskid is required. Applications includewaste treatment plants, petroleum facilities, pulp andpaper mills, mining facilities, chemical plants, etc.For detailed information, see Philadelphia Resins'Bulletin #968.
Core Roller Application
TECHNICAL BULLETINS
Bulletin # 968G- IMPAX 300 NON SKID - Epoxy Heavy Duty Non-Skid Coating
7/26/2019 Chockfast Product
10/12
Bulletin # 677A- IMPAX 300 NON SKID CHEMICAL RESISTANCE CHART
MSDS INFORMATION
IMPAX 300
Self-Leveling Epoxies
State-of-the-art application methods using notchedsqueegee and spike roller.
IMPAX 650 RC/SL100% Solids Self Leveling EpoxyIMPAX 650RC/SL is a 100% solids, two component,self-leveling epoxy floor coating. This highperformance floor system provides a high gloss,seamless, hygienic surface that is extremely hardwearing and durable. It is available in five colors andmeets OSHA and State VOC regulations. It alsomeets USDA standards for maintenance protectivecoatings not in direct contact with food in federallyinspected meat and poultry plants. The coating can
also be applied to provide a non-slip texture.For detailed information, request Philadelphia Resins'
Bulletin #1009
Back to the top
TECHNICAL BULLETINS
Bulletin # 1009- IMPAX 65ORC - 100% Solids, Self-Leveling EpoxyCoating
MSDS INFORMATION
IMPAX 65ORC - Deck Gray, Haze Gray, Red, Sandstone, White
30/50 Flint Shot
Secondary Containment Systems & Chemical Resistant Coatings
Secondary Containment and Chemical-Resistant Coatings manufactured by ITW Philadelphia Resins providedurable, long-lasting maintenance products for protection of industrial applications subject to chemical attack
and severe environmental conditions.
Well suited for secondary containment applications, these coatings afford superior resistance to petroleum
products, acids, salts alkalis, solvents and other substances. Their superior abrasion, corrosion and impactresistance provide considerable adaptability in a wide array of industrial applications.
7/26/2019 Chockfast Product
11/12
Impax SCS Penetrating Epoxy Primer:
Impax SCS penetrating epoxy primer protects bare concrete, old or new, where a two component, penetratingsealer is recommended; especially in secondary containment systems. Its low viscosity and quick tack help to
ensure fast, efficient new installations, as well as very rapid turnarounds during downtimes.
For detailed information, see Philadelphia Resins Technical Bulletin # 1002B
TECHNICAL BULLETINS
Bulletin # 1002B- IMPAX SCS PENETRATING EPOXY PRIMER
MSDS INFORMATION
IMPAX SCSPENETRATING EPOXY PRIMER
IMPAX 6700 80% Solids, High - Build,Acid-Resistant Novolac Coating:
Phillyclad 6470 Heavy-Duty Coating:
IMPAX 6700 is a 80% solids, high-build,protective coating resists severe attackby chemicals, petrochemical, acids andalkalis. Protects concrete floors andwalls around storage tanks, pumps,process vessels and other equipmentfrom corrosive environments. Tough,durable and even impervious to spillsand splashes of concentrated 98%sulfuric acid. Low viscosity and
excellent adhesion characteristics insurea tight bond to clean sound concrete
surfaces.
For detailed information, see Philadelphia ResinsTechnical Bulletin # 1006
TECHNICAL BULLETINS
Bulletin # 1006- IMPAX 6700 - 80% Solids, High-Build Acid-Resistant Coating
MSDS INFORMATION
IMPAX 6700
Back tothe top
Phillyclad 6470 is a 100% solids, two component,high-build epoxy coating developed for severeenvironmental conditions. Phillyclad 6470 providesa tough, flexible coating with a dry film thickness of10-15 mils per coat. Excellent adhesivecharacteristics along with exceptional abrasion,erosion and impact resistance provides considerableversatility for a broad range of applications. Gooddielectric properties provide effective protectionagainst galvanic corrosion in applications involving
dissimilar metals.
For detailed information, see Philadelphia Resins Technical Bulletin #963
TECHNICAL BULLETINS
Bulletin # 963H-PHILLYCLAD 6470 - 100% Solids, High-Build,Heavy Duty Epoxy Coating
MSDS INFORMATION
PHILLYCLAD 6470
ITW Philadelphia Resins130 Commerce DriveMontgomeryville, PA 18936
Phone: 800-284-8450215-855-8450
Fax: 215-855-4688
ITW Philadelphia ResinsShannon Industrial EstateShannon Free Airport
County Clare, IrelandPhone: 353.61.471299Fax: 353.61.471285
7/26/2019 Chockfast Product
12/12
Email:[email protected]
Back tothe top
Email: [email protected]
HOME| ABOUT PHILLY| REGIONAL OFFICES| DISTRIBUTORS| PRODUCT OVERVIEW
REFERENCE DATA| SEMINARS| NEWS & EVENTS| MARINE VISITORS
Copyright 2003 ITW Philadelphia Resins. All rights reserved.
ChockfastProduct Catalog
(available in print)
Downloadable Zipped single PDF file of completeChockfastProduct Catalog
MachineryGrout Manual
(available in print)
Downloadable Zipped single PDF file of complete
Machinery Grout Manual