Cifa Shotcrete Telescopic
CST 8.20
Dimensions and Performances
CSTPAS 206DieselElectric(*)2 axles 4WD
Placing BoomPumping unitDriven modeShotcretingChassis
TruCk-mounTeD SPrayeDConCreTe Boom PumP
CIFA S.p.A.via Stati Uniti d’America, 2620030 Senago (Milano) - Italiatel.: +39.02.990131 - fax: +39.02.9981157www.cifa.com
Cifa Shotcrete Telescopic
CST 8.20
ISO 9001:2008
CST
_EN
G_0
412
(*) Available action in Diesel mode are: boom folding/unfolding and outrigger opening/closing Technical data and characteristics subject to modifications without notice
CSTPAS 206DieselElectric(*)2 axles 4WD
Placing BoomPumping unitDriven modeShotcretingChassis
TruCk-mounTeD SPrayeDConCreTe Boom PumP
Truck Chassis Technical Data
Boom Technical Data
Pumping unit Technical Data
model Shotruck 1
Installed power kW@rpm 72@2300
Turning circle m 3,2
Wheelbase m 3,785
Coupling angle 21°
Outlet angle 23°
Truck tyres 15x24
Net Weight (dry) Kg 10500
Max. Weight Kg 11500
model CST
Boom vertical rotation angle ±120°
1st section working angle (related to vertical position) -20° +75°
2nd section working angle (related to 1st section) +180°
1st section length m 4,2
2nd section (telescopic) length m 2,5
Telescopic stroke m 3,5
Longitudinal nozzle rotation 180°
Transversal nozzle rotation ±90°
model PaS 206
Theoretical output (Min ÷ Max) m3/h 3 ÷ 20
Max. pressure on concrete bar 55
Max. number of cycles per minute n° 16
Concrete cylinders (diam. x stroke) mm 200X650
Hopper capacity L 220
Hopper filling height mm 1290
Absobed power (electric) kW 37
Power supply 400V / 50Hz440V / 60Hz
Standard equipment•Diesel engine by Deutz D914L05 tier3/Step IIIA, power 72 kW•Electric motor 45 kW IE2•Uniflux H1.0 dosing system, with peristaltic pump with hydraulic drive
and electronic management, configurable in two capacities to meet the requirements of different flow rates. Suitable for all types of liquid additives. Keeps the preset percentage of additive constant, even when the pumping parameters of the concrete change•Manual wind cable device with 50 m cable E900•Water tank (82 L)•Additives alluminium tank 320 L with rapid connection for external
tanks•Electric vibrator on the grid•n°1 Proportional radio-remote control •Air pressure regulator•Hydraulically controlled high pressure water pump (16 l/min – 120 bars), with washing nozzle and 20 m of pipe•Catalytic silencer •Nebulization fluid handpump for concrete anti-adhesion protection (10 L)•Automatic lubrication in 6 points for “S” valve and hopper mixer•Manual lubrication for boom and slewing ring•Open FOPS cab, with reversible driving position•N°4 x 45W-4800 lumen xenon working light•N°1 x 70W light on hopper•Air compressor (55 kW, 8’900 L/min, max 6 bar)
optional•Nozzle brush movement•Manual wind cable device with 100 meters•Second proportional radio-remote control•Water-based silencer•Anti-particulatefilter(FAP)•Additives heating system•External plastic tank 1000 L for additives with 15 meters hose with
rapid connection•Cold climate oil•Low flamable oil•Foam fire suppression system (manual and automatic) on Diesel
engine trunk•ATEX cofiguration•Configuration complying with Swiss regulation for underground
operation (for Swiss market only)
CSTPAS 206DieselElectric(*)2 axles 4WD
