+ All Categories
Home > Documents > Circo - zenithinteriors.com · Circo Classically proportioned conference and light work chair....

Circo - zenithinteriors.com · Circo Classically proportioned conference and light work chair....

Date post: 13-Nov-2018
Category:
Upload: trantu
View: 222 times
Download: 0 times
Share this document with a friend
4
Circo
Transcript

zenithinteriors.com

Circo

CircoClassically proportioned conference and light work chair.

CIRCO WORK CHAIRFEATURESThe design has been realised from the development of a complex single injection moulded piece. The plastic parts are moulded in a choice of Light Grey or Black, the chair utilises a Light Grey or Black 3D spacer mesh for the back and an upholstered seat. To further enhance the abilities and performance of the chair a minimalist height adjustment and pivot mechanism has been developed that is housed within the chair frame itself. The chair is available on a 5-star base and can be specified with either castors or glides.

FINISHESBlack nylon chair frame with Black 3D spacer mesh back, Black gas column, Black GRP 5 star base and Black plastic glides.Black nylon chair frame with Black 3D spacer mesh back, Black gas column - 150kg, Black GRP 5 star base and Black 60mm hard wheel castor for soft floors.Light Grey nylon chair frame with Light Grey 3D spacer mesh back, Brushed Chrome gas column – 150kg, Llight Grey GRP 5 star base and Light Grey plastic glides.Light Grey nylon chair frame with Light Grey 3D spacer mesh back, Brushed Chrome gas column - 150kg, Light Grey GRP 5 star base and Black 65mm hard wheel castor for soft floors.

CERTIFICATION

DESIGN Justus Kolberg

DIMENSIONS

OW 700mmSW 490mm

H 8

90 –

101

0mm

AH

215

mm

SH 4

20 –

540

mm

OD 750mm SD 460mm

CIRCO WORK CHAIR

STANDARD FEATURES/FINISHES CR1Conference chair, static yoke with castors

CR2Conference chair, dynamic yoke with castors

CR3Conference chair, static yoke with glides

CR4Conference chair, dynamic yoke with glides

Weight 9.3kg 9.3kg 9.2kg 9.2kgBlack nylon chair frame with Black 3D spacer mesh back • • • •Dynamic Yoke, height adjustment and free-floating tilt – • – •Static Yoke, swivel only • – • –Black GRP 5 star base • • • •60mm hard wheel castors for soft floors • • – –Black plastic glides – – • •Black gas column - 150kg • • • •Light Grey nylon plastic components with grey 3D spacer mesh back + + + +Graphite plastic components with Black 3D spacer mesh back + + + +Graphite plastic components with Black 3D spacer mesh back polished aluminium base

+ + + +

Memory return column + – + –Alternative mesh colours available: Burnt Orange, Fresh Apple, Snow, Soft Cyan

+ + + +

• Standard feature – Not available + Optional feature

CIRCO WORK CHAIRCARE & MAINTENANCEPeriodic maintenance is necessary to ensure long term durability and customer satisfaction. All products should be closely inspected each month.If any items show any sign of structural failure it should be taken out of service immediately.Chrome FramesClean Chrome with a good grade Chrome cleaner to maintain bright finish. Occasionally Chrome leakage can occur on products that have just been delivered, again clean with cleaner to eliminate.Epoxy Powder FramesClean using a damp cloth with a mild solution of soap and water.Plastic/Felt FeetNeed to be inspected and replaced if wornWood Seating and TablesWood is a natural product and owes its inherent beauty to the variations in colour, texture and grain which are not considered defects. Because of this, Allermuir cannot guarantee the exact matching of any of the wood items. Allermuir is also not able to guarantee matching of colours between batches, as wood ages naturally through time and exposure to sunlight. A thorough inspection should be made monthly to ensure that the joints have not become too loose. Take out of service immediately if this has occurred. Joints may become loose when people continually rock back and forth.Wood can be cleaned with a water soluble solution to remove build-up of grease and grime (remove any excess water immediately). Wood products should not be subjected to extreme temperatures, particularly heat, moisture and direct sunlight.FabricPlease follow specific manufacturing guidelines on the cleaning of fabric. Cleaning with the wrong substance could damage the fabric.LeatherCan be cleaned with a mild saddle soap.Table TopsClean with a soft damp cloth and mild detergent solution.

UPHOLSTERY MATERIAL USED IN IMAGES: Cover Image: Circo – Blazer Camphill band 3 fabric


Recommended