Date post: | 18-Dec-2015 |
Category: |
Documents |
Upload: | laura-watts |
View: | 217 times |
Download: | 1 times |
Cisco 1 - Networking Basics
Perrine. J Page 104/18/23
Chapter 10
Performing the Boolean function as a router would on the IP addresses 172.16.2.120 and 255.255.255.0, what is the subnet address?
1. 172.0.0.0
2. 172.16.0.0
3. 172.16.2.0
4. None of the above
Cisco 1 - Networking Basics
Perrine. J Page 204/18/23
Chapter 10
Performing the Boolean function as a router would on the IP addresses 172.16.2.120 and 255.255.255.0, what is the subnet address?
1. 172.0.0.0
2. 172.16.0.0
3. 172.16.2.0
4. None of the above
Cisco 1 - Networking Basics
Perrine. J Page 304/18/23
Chapter 10
Which of the following are benefits of subnetting? (Choose three.)
1. smaller broadcast domains
2. larger collision domains
3. low-level security provided
4. fewer broadcast domains
5. increased address flexibility
6. larger broadcast domains
Cisco 1 - Networking Basics
Perrine. J Page 404/18/23
Chapter 10
Which of the following are benefits of subnetting? (Choose three.)
1. smaller broadcast domains
2. larger collision domains
3. low-level security provided
4. fewer broadcast domains
5. increased address flexibility
6. larger broadcast domains
Cisco 1 - Networking Basics
Perrine. J Page 504/18/23
Chapter 10
What is the minimum number of bits that can be borrowed to form a subnet?
1. 1
2. 2
3. 4
4. None of the above
Cisco 1 - Networking Basics
Perrine. J Page 604/18/23
Chapter 10
What is the minimum number of bits that can be borrowed to form a subnet?
1. 1
2. 2
3. 4
4. None of the above
Cisco 1 - Networking Basics
Perrine. J Page 704/18/23
Chapter 10
Which of the following are link-state routing protocols? (Choose two.)
1. RIPv1
2. IGRP
3. OSPF
4. IS-IS
5. EIGRP
6. RIPv2
Cisco 1 - Networking Basics
Perrine. J Page 804/18/23
Chapter 10
Which of the following are link-state routing protocols? (Choose two.)
1. RIPv1
2. IGRP
3. OSPF
4. IS-IS
5. EIGRP
6. RIPv2
Cisco 1 - Networking Basics
Perrine. J Page 904/18/23
Chapter 10
Which of the following are metrics used with routing protocols? (Choose three.)
1. algorithm
2. delay
3. convergence
4. cost
5. reliability
6. optimization
Cisco 1 - Networking Basics
Perrine. J Page 1004/18/23
Chapter 10
Which of the following are metrics used with routing protocols? (Choose three.)
1. algorithm
2. delay
3. convergence
4. cost
5. reliability
6. optimization
Cisco 1 - Networking Basics
Perrine. J Page 1104/18/23
Chapter 10
Which three facts can be determined from the subnet mask 255.255.255.240? (Choose three.)
1. The network address of the last subnet will have 240 in the last octet.
2. The number of usable host addresses per subnet, regardless of major network class, will be 14.
3. The number of usable subnets, regardless of major network class, will be 14.
4. The broadcast address of the last usable subnet will have 240 in the last octet.
5. The network address of the first subnet will have 0 in the last octet.
6. The broadcast address of the first subnet will have 240 in the last octet.
Cisco 1 - Networking Basics
Perrine. J Page 1204/18/23
Chapter 10
Which three facts can be determined from the subnet mask 255.255.255.240? (Choose three.)
1. The network address of the last subnet will have 240 in the last octet.
2. The number of usable host addresses per subnet, regardless of major network class, will be 14.
3. The number of usable subnets, regardless of major network class, will be 14.
4. The broadcast address of the last usable subnet will have 240 in the last octet.
5. The network address of the first subnet will have 0 in the last octet.
6. The broadcast address of the first subnet will have 240 in the last octet.
Cisco 1 - Networking Basics
Perrine. J Page 1304/18/23
Chapter 10
What function allows routers to evaluate available routes to a destination and to establish the preferred handling of a packet?
1. Data linkage
2. Path determination
3. SDLC interface protocol
4. Frame Relay
Cisco 1 - Networking Basics
Perrine. J Page 1404/18/23
Chapter 10
What function allows routers to evaluate available routes to a destination and to establish the preferred handling of a packet?
1. Data linkage
2. Path determination
3. SDLC interface protocol
4. Frame Relay
Cisco 1 - Networking Basics
Perrine. J Page 1504/18/23
Chapter 10
Which of the following are routed protocols? (Choose three.)
1. IP
2. SNMP
3. IPX
4. DNS
5. AppleTalk
6. BGP
Cisco 1 - Networking Basics
Perrine. J Page 1604/18/23
Chapter 10
Which of the following are routed protocols? (Choose three.)
1. IP
2. SNMP
3. IPX
4. DNS
5. AppleTalk
6. BGP
Cisco 1 - Networking Basics
Perrine. J Page 1704/18/23
Chapter 10
Which statements describe the effects broadcast storms have on networking equipment? (Choose two.)
1. Switches can be overwhelmed.
2. Switches block broadcasts.
3. Switches handle broadcasts in similar fashion to routers.
4. Routers can be segmented to increase bandwidth.
5. Routers block broadcasts.
6. Routers and switches provide security and bandwidth control to overcome broadcast storms
Cisco 1 - Networking Basics
Perrine. J Page 1804/18/23
Chapter 10
Which statements describe the effects broadcast storms have on networking equipment? (Choose two.)
1. Switches can be overwhelmed.
2. Switches block broadcasts.
3. Switches handle broadcasts in similar fashion to routers.
4. Routers can be segmented to increase bandwidth.
5. Routers block broadcasts.
6. Routers and switches provide security and bandwidth control to overcome broadcast storms
Cisco 1 - Networking Basics
Perrine. J Page 1904/18/23
Chapter 10
Which processes occur each time a packet is switched from one router interface to another? (Choose two.)
1. encapsulation
2. ARP
3. RARP
4. de-encapsulation
5. circuit switching
6. FastForward switching
Cisco 1 - Networking Basics
Perrine. J Page 2004/18/23
Chapter 10
Which processes occur each time a packet is switched from one router interface to another? (Choose two.)
1. encapsulation
2. ARP
3. RARP
4. de-encapsulation
5. circuit switching
6. FastForward switching
Cisco 1 - Networking Basics
Perrine. J Page 2104/18/23
Chapter 10
Which of the following are considered parts of an IP packet header? (Choose three.)
1. HLEN
2. MAC address
3. Padding
4. Flags
5. invalidate
Cisco 1 - Networking Basics
Perrine. J Page 2204/18/23
Chapter 10
Which of the following are considered parts of an IP packet header? (Choose three.)
1. HLEN
2. MAC address
3. Padding
4. Flags
5. invalidate
Cisco 1 - Networking Basics
Perrine. J Page 2304/18/23
Chapter 10
Which of the following are routed protocols? (Choose three.)
1. IP
2. BGP
3. XNS
4. RIP
5. OSPF
6. DECnet
Cisco 1 - Networking Basics
Perrine. J Page 2404/18/23
Chapter 10
Which of the following are routed protocols? (Choose three.)
1. IP
2. BGP
3. XNS
4. RIP
5. OSPF
6. DECnet
Cisco 1 - Networking Basics
Perrine. J Page 2504/18/23
Chapter 10
Which of the following is a non-routable protocol?
1. IP
2. IPX
3. DECNET
4. NetBEUI
5. AppleTalk
Cisco 1 - Networking Basics
Perrine. J Page 2604/18/23
Chapter 10
Which of the following is a non-routable protocol?
1. IP
2. IPX
3. DECNET
4. NetBEUI
5. AppleTalk
Cisco 1 - Networking Basics
Perrine. J Page 2704/18/23
Chapter 10
Which IP packet field will prevent endless loops?
1. type-of-service
2. identification
3. time-to-live
4. flags
5. header checksum
Cisco 1 - Networking Basics
Perrine. J Page 2804/18/23
Chapter 10
Which IP packet field will prevent endless loops?
1. type-of-service
2. identification
3. time-to-live
4. flags
5. header checksum
Cisco 1 - Networking Basics
Perrine. J Page 2904/18/23
Chapter 10
Which protocol routes packets based only on a network number?
1. IPX
2. TCP
3. NetBeui
4. UDP
Cisco 1 - Networking Basics
Perrine. J Page 3004/18/23
Chapter 10
Which protocol routes packets based only on a network number?
1. IPX
2. TCP
3. NetBeui
4. UDP
Cisco 1 - Networking Basics
Perrine. J Page 3104/18/23
Chapter 10
Which of the following OSI layers offers reliable, connection-oriented data communication services?
1. session
2. transport
3. network
4. data link