All information is believed to be accurate at the time of publication. Please contact customer service or visit www.XLM.com for the most updated product specifications. XtraLight ® reserves the right to change specifications without notice. www.XLM.com • (800) 678-6960 • [email protected]® Project Name Catalog # Type Date PROJECT INFORMATION PROUDLY ENGINEERED & MANUFACTURED HOUSTON, TX CSR LED 203010 CITYSAVER ® LED STREET LIGHT CSR LED FEATURES • Energy efficient family of LED luminaires for replacement of up to 400W HID. • Familiar cobra head style, optimized for LED operation and performance. • Tool-free access to mounting and electrical components. • Controls ready luminaire is standard for independent operation or remote management. • Multiple light distributions and lumen levels for diverse application requirements covering all roadway needs. • Ease of installation, long service life and minimal maintenance. • Operating temperature: -40°C to +50°C (-40°F to +122°F) CONSTRUCTION • Housing and door are one-piece die-cast aluminum with integral mounting for strength and durability. • Door is removable without tools and rear-hinged for ease of installation and service. • LED boards and drivers are mounted directly to the housing’s integral heat sink for thermal management and maximum service life. • No lens frame or secondary glass for maximum performance. • All fasteners are stainless steel. • Housing and door are protected with a thermoset TGIC-polyester powder coat finish using a tightly controlled multi-stage process to a uniform 3 mil thickness (min). This finish provides superior protection from corrosion and maximum environmental durability. MOUNTING • Integral horizontal mast arm mounting for 1-1/4” to 2”IP (1.66”- 2.38”OD) for compatibility and ease of installation. • Horizontal orientation with internal +/− 5° adjustment for leveling in 2.5° increments. • Bubble Level for lateral and longitudinal orientation provides quick visual reference, speeding installation. • Bird guard for arm diameters smaller than 2”IP (2.38” OD). OPTICS • Precision molded optics for superior uniformity, minimal light trespass and maximum pole spacing. • Optical grade polymer is UV stabilized and impact resistant. • IP66 rated LED light engines prevent dust and moisture from degrading performance. • Distributions: Type II, Type III, Type IV and Type V. • Best in class LEDs with 3000K, 4000K, 5000K and 5700K CCT (min 70 CRI). • Zero uplight (U0) is night sky friendly, reduces wasted light. • Lumen Maintenance: >100,000hrs L 70 @ 25°C. • Optional backlight shielding available for Type II, Type III and Type IV distributions protects against light trespass. ELECTRICAL • All serviceable components are assembled and pre-wired using quick connects. • Voltage: 120-277V 50/60Hz universal driver or optional 347/480V. • Surge Protection: 20kA standard. • Dimming: 0-10v dimmable driver is standard. • Controls: 5-pin twist-lock receptacle is standard (optional 7-pin) for controls ready operation. • Photocontrol or shorting cap required for operation, but not included. • Terminal block adjacent to arm mounting for ease of installation. • ANSI wattage labels provided as standard. • Passive Infrared (PIR) Photo/Motion Sensor available as an option. WARRANTY • Backed by XtraLight’s industry leading 10-year warranty. APPLICATIONS • Replacement of existing HID cobra head luminaires and new installations • Residential & Local Streets • Local & Major Roadways • Intersections & Cross-walks • Alleys and Pedestrian Walkways COMPLIANCE • ANSI C136.2, .3, .10, .14, .15, .22, .25, .31, .37 and .41 • ANSI/IES RP-8-14 Roadway Lighting • MSSLC Model Specification for LED Roadway Luminaires v2 (2014) T E N YE A R W A R R A N T Y APPROVALS • ETL listed. Complies with UL1598 and CSAC22.2#250.0.0:2008 • Suitable for wet locations • 3G Vibration Rated for Bridge/Overpass Applications per ANSI C136.31-2010, Test Level 2 • IP66 Optics and Housing • BAA Compliant • RoHS Compliant • Select models DLC Qualified. For a complete list of DLC Qualified products, please visit: www.xtralight.com/dlc or www.designlights.org/qpl • Appropriate parts/test guidelines were performed by ATAL www.ata-labs.com ®
Transcript
All information is believed to be accurate at the time of publication. Please contact customer service or visit www.XLM.com for the most updated product specifications. XtraLight® reserves the right to change specifications without notice.
FEATURES • Energy efficient family of LED luminaires for replacement of up
to 400W HID.
• Familiar cobra head style, optimized for LED operation and performance.
• Tool-free access to mounting and electrical components.
• Controls ready luminaire is standard for independent operation or remote management.
• Multiple light distributions and lumen levels for diverse application requirements covering all roadway needs.
• Ease of installation, long service life and minimal maintenance.
• Operating temperature: -40°C to +50°C (-40°F to +122°F)
CONSTRUCTION• Housing and door are one-piece die-cast aluminum with integral
mounting for strength and durability.
• Door is removable without tools and rear-hinged for ease of installation and service.
• LED boards and drivers are mounted directly to the housing’s integral heat sink for thermal management and maximum service life.
• No lens frame or secondary glass for maximum performance.
• All fasteners are stainless steel.
• Housing and door are protected with a thermoset TGIC-polyester powder coat finish using a tightly controlled multi-stage process to a uniform 3 mil thickness (min). This finish provides superior protection from corrosion and maximum environmental durability.
MOUNTING• Integral horizontal mast arm mounting for 1-1/4” to 2”IP (1.66”-
2.38”OD) for compatibility and ease of installation.
• Horizontal orientation with internal +/− 5° adjustment for leveling in 2.5° increments.
• Bubble Level for lateral and longitudinal orientation provides quick visual reference, speeding installation.
• Bird guard for arm diameters smaller than 2”IP (2.38” OD).
OPTICS• Precision molded optics for superior uniformity, minimal light
trespass and maximum pole spacing.
• Optical grade polymer is UV stabilized and impact resistant.
• IP66 rated LED light engines prevent dust and moisture from degrading performance.
• Distributions: Type II, Type III, Type IV and Type V.
• Best in class LEDs with 3000K, 4000K, 5000K and 5700K CCT (min 70 CRI).
• Zero uplight (U0) is night sky friendly, reduces wasted light.
• Lumen Maintenance: >100,000hrs L70
@ 25°C.
• Optional backlight shielding available for Type II, Type III and Type IV distributions protects against light trespass.
ELECTRICAL• All serviceable components are assembled and pre-wired using
quick connects.
• Voltage: 120-277V 50/60Hz universal driver or optional 347/480V.
• Surge Protection: 20kA standard.
• Dimming: 0-10v dimmable driver is standard.
• Controls: 5-pin twist-lock receptacle is standard (optional 7-pin) for controls ready operation.
• Photocontrol or shorting cap required for operation, but not included.
• Terminal block adjacent to arm mounting for ease of installation.
• ANSI wattage labels provided as standard.• Passive Infrared (PIR) Photo/Motion Sensor available as an
option.
WARRANTY
• Backed by XtraLight’s industry leading 10-year warranty.
APPLICATIONS• Replacement of existing HID cobra
head luminaires and new installations• Residential & Local Streets
• Local & Major Roadways• Intersections & Cross-walks• Alleys and Pedestrian Walkways
COMPLIANCE• ANSI C136.2, .3, .10, .14, .15, .22, .25, .31, .37 and .41• ANSI/IES RP-8-14 Roadway Lighting• MSSLC Model Specification for LED Roadway Luminaires v2 (2014)
TEN YEAR
WARRANTY
APPROVALS• ETL listed. Complies with UL1598 and CSAC22.2#250.0.0:2008• Suitable for wet locations• 3G Vibration Rated for Bridge/Overpass Applications per ANSI
C136.31-2010, Test Level 2• IP66 Optics and Housing• BAA Compliant• RoHS Compliant• Select models DLC Qualified. For a complete list of DLC
Qualified products, please visit: www.xtralight.com/dlc or www.designlights.org/qpl
• Appropriate parts/test guidelines were performed by ATAL www.ata-labs.com
All information is believed to be accurate at the time of publication. Please contact customer service or visit www.XLM.com for the most updated product specifications. XtraLight® reserves the right to change specifications without notice.
1. Photocontrol not included.2. Single bracket/2-Bolt mount is standard on CSR-S, N/A on CSR-M.3. Dual bracket/4-Bolt mount is optional on CSR-S, standard on CSR-M.4. FSP-211 sensors are not to be used with twist-lock receptacles.5. 347V driver option only available for CSR-M 075 and CSR-M 096 mod-els.
CitySaver Small CitySaver Medium
SIDE
BOTTOM
TOP
REARFRONT
CITYSAVER SMALL FIXTURE
1CitySaver SMSHEET 1 OF 1
4/11/16RBS
NOT TO SCALE
REVDWG. NO.
ASIZE
TITLE:NAME DATE
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
DIMENSIONS ARE IN INCHESTOLERANCES:ANGULAR: MACH BEND 1THREE PLACE DECIMAL 0.020
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFXTRA LIGHT MFG. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OFXTRA LIGHT MFG. IS PROHIBITED.
SIDEFRONT REAR
BOTTOM
TOP
CITYSAVER MEDIUM FIXTURE
1CitySaver MedSHEET 1 OF 1
4/11/16RSS
NOT TO SCALE
REVDWG. NO.
ASIZE
TITLE:NAME DATE
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
DIMENSIONS ARE IN INCHESTOLERANCES:ANGULAR: MACH BEND 1THREE PLACE DECIMAL 0.020
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFXTRA LIGHT MFG. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OFXTRA LIGHT MFG. IS PROHIBITED.
• EPA: 0.72 sq ft
• 14 lbs.
• 25.8” L x 9.5” W x 5.1” H
• EPA: 1.14 sq ft
• 22 lbs.
• 29.5” L x 13.0” W x 5.2” H
ISO LinesDistance in Units of Mounting Height Values Based on 25 Foot Mounting Height.
Type II Medium
Type III Medium
Type IV Short
Type V Square Medium
N GYCSR
DIMENSIONAL DATA
PHOTOMETRIC DATA
CONTROLS
5 1 Twist-Lock recept. 5-pin
7 1 Twist-Lock recept. 7-pin
B 4 FSP-
D 4 FSP-
COLOR
GY Grey
CITYSAVER® LED STREET LIGHTCSR LED
SAMPLE CATALOG NUMBER: CSRM020753MNDIM40K2054GY
SIZE
S Small
M Medium
MODULE
01
02
03
MODEL
036
052
075
096
125
150
ORIENTA-TION
N Normal
OPTICS
2M Type II Medium
3M Type III Medium
DRIVER
DIM Dimmable 0-10V, Multi-Volt 120-277V
CCT
30K 3000K
40K 4000K
50K 5000K
57K 5700K
SURGE
20 20kV/20kA
OPTIONS
HS House Side Shield
MOUNT
22 2 bolt/ single bracket
43 4 bolt/ dual bracket
211L3@20’MH/40’DIA
211L7@40’MH/100’DIA
PRODUCT PERFORMANCEMODEL REPLACES LUMENS EFFICACY
CSR-S 36 & 52UP TO
150W HIDUP TO
7200UP TO
141
CSR-M 75, 96, 125 & 150UP TO
400W HIDUP TO
20500UP TO
131
Forward
All information is believed to be accurate at the time of publication. Please contact customer service or visit www.XLM.com for the most updated product specifications. XtraLight® reserves the right to change specifications without notice.
All information is believed to be accurate at the time of publication. Please contact customer service or visit www.XLM.com for the most updated product specifications. XtraLight® reserves the right to change specifications without notice.
FSP-L7 top and side coverage patterns0'10' 10'20' 20'30' 30'40' 40'
0'
27'
40'
50'50'50' 25' 0' 25' 50'
0'
50'
25'
25'
50'
100'
FSP-L7 dimensions
3.2”81.3mm
1.04”26.4mm
WWW.LEGRAND.US/WATTSTOPPER
WATTSTOPPER®FIXTURE SENSORS & CONTROLS
DescriptionThe FSP-211 mounts in an outdoor lighting fixture and provides multi-level control based on motion and/or daylight contribution. It controls 0-10 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, is rated for wet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles.
OperationTypically, the sensor ramps lighting On to the selected High mode level when motion is detected and the ambient light level is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. For dusk to dawn control, the integral photocell can switch the lights On and Off based on the ambient light level so that lighting remains on overnight even without motion detection.
Wireless Handheld Configuration ToolInitial setup and subsequent sensor adjustments are made using a handheld configuration tool (FSIR-100). This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cut off and more. The FSIR-100 is also used to initiate automatic calibration of the FSP-211 ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at low level when there is sufficient daylight. The wireless tool stores up to six sensor parameter profiles to speed configuration of multiple sensors.
ApplicationsThe slim, low-profile FSP-211 is designed for installation inside the bottom of a light fixture body. When fully assembled and installed in an IP66-rated fixture, the sensor and FSP-Lx lenses are IP66 outdoor rated. The sensor is ideal for areas such as parking facilities, gas stations, pedestrian pathways and warehouses. A choice of four lenses ensures complete coverage for mounting heights up to 40’.
LINE VOLTAGE HIGH/LOW/OFF PIR FIXTURE INTEGRATED OUT-DOOR PHOTO/MOTION SENSOR
FSP-211
• Provides line voltage On/Off switching and 0-10 VDC dimming control
• Works with ballasts or LED drivers
• High and low modes fully adjustable from 0 to 10V
• UL244A and UL508; IP66 rated (when fully assembled and installed) for use in wet locations
• This product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available
Features
Fully adjustable high and low dimmed light levels; optional
dusk to dawn control
Adjustable via handheld wireless configuration tool
Adjustable time delay and cut off delay
Designed for LED fixtures; rated for extreme
temperatures and up to 200,000 on/off cycles
IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8’ to 40’
Hold off setpoint with automatic calibration option
for convenience and added energy savings
WATTSTOPPER®
CITYSAVER® LED STREET LIGHTCSR LED
All information is believed to be accurate at the time of publication. Please contact customer service or visit www.XLM.com for the most updated product specifications. XtraLight® reserves the right to change specifications without notice.
All information is believed to be accurate at the time of publication. Please contact customer service or visit www.XLM.com for the most updated product specifications. XtraLight® reserves the right to change specifications without notice.
