Date post: | 29-Mar-2015 |
Category: |
Documents |
Upload: | jeremy-scovil |
View: | 216 times |
Download: | 1 times |
Cladding panels
Bicycle shelter clad with perforated pre galvanised panels. The perforated sheet acts as a wind and rain screen. (9.5mm round holes 14.2mm staggered pitch in 2mm thick material)
Bicycle shelter clad with perforated pre galvanised panels.
The perforated sheet acts as a wind and rain screen. (9.5mm round holes 14.2mm staggered pitch in 2mm thick material)
Perforated & framed hot dipped galvanised steel painted balcony
dividers (9.5mm round holes 14.2mm staggered pitch in 3mm thick
material)
Low open area perforated mild steel galvanised & powder coated balcony
screens (9.5mm round holes with 24.59 staggered pitch)
Perforated pre galvanised and powder coated cladding
for a gate (13mm round holes 19mm staggered pitch
in 2mm thick material)
Perforated galvanised &
painted cladding for gate
(12.7mm round 19mm staggered
pitch in 3mm thick material
Perforated aluminium cladding on a pedestrian
bridge. The primary purpose of the perforated sheet in this application
was to stop people throwing things onto the trains
below. (20mm round holes with 30mm staggered pitch
4mm thick material)
Perforated aluminium cladding on a pedestrian bridge. The primary purpose of the perforated sheet in this application was
to stop people throwing things onto the trains below. (20mm round holes with 30mm
staggered pitch 4mm thick material)
Perforated pre galvanised & powder coated bin enclosure
(20mm round holes 30mm staggered pitch in 3mm thick
material)
Perforated lift shaft cladding with a clear powder lacquer finish (9.5mm round holes
14.2mm staggered pitch in 2mm thick material)
Perforated pre galvanised & powder coated cricket ball
screen (6.35mm round holes 9.5mm staggered
pitch in 2mm thick material)
High open area perforated pre
galvanised & powder coated perforated
sheet 3mm round with 4mm staggered pitch
Perforated 316 quality stainless
steel & woven mesh cladding
panels
Perforated 316 quality stainless steel & woven mesh cladding panels
Woven mesh cladding and ventilation panels (80mm mesh in 12mm high tensile wire hot dipped galvanised &
powder coated)
Woven mesh cladding and ventilation panels (80mm mesh in 12mm high tensile wire hot dipped galvanised & powder coated
Woven mesh ventilation and cladding panels
16mm mesh in 5mm wire
Galvanised woven mesh ventilation & cladding panels
50mm mesh in 8mm wire