22
© Schmalz, 02/16 I Article No. 29.01.03.01003 I Subject to technical changes without notice I Schmalz is a registered trademark
Efficient Clamping Systems
Vacuum Clamping SystemsClamping Solutions for Woodworking
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:15 Seite 2
Consistent customer orientation and groundbreaking innovations, excellent quality and comprehensive consultingcompetence make Schmalz the world's leading partner for vacuum technology in automation, handling, andclamping applications.
As a company that acts globally and offers innovative products and services, we provide our customers with efficient solutions tailored precisely to their particular applications’ requirements. We inspire our customers wherever production processes are designed more efficiently through the use of vacuum technology.
With our certifications, including ISO 9001 for quality management, ISO 14001 for environmental managementand ISO 50001 for energy management, we guarantee our partners standardized and sustainable processes.
Are you a machine manufacturer or integrator? Schmalz supplies complete clamping systems for your vacuum machine table, regardless of manufacturer and individually adapted to your needs. Please contact us: Tel. +49 7443 2403-109, [email protected].
Vacuum Clamping Systems from Schmalz
As a long-term partner of well-known machine manu -facturers, Schmalz offers considerable experience andexpertise in vacuum clamping technology. Whether initial equipment, retrofit solutions or spare parts –Schmalz offers a large selection of high-quality clampingequipment for your application. With the versatile vacuum clamping system Multi-Clamp,Schmalz developed a solution for the manual processingof workpieces, such as sawing, grinding, drilling or screwing.
World of Vacuum Technology
Schmalz
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 3
Console Table Systems 4Vacuum Blocks VCBL-K1 6For Consoles from Schmalz (1-Circuit Vacuum Systems) Vacuum Blocks VCBL-K2 12For Consoles from Schmalz (2-Circuit Vacuum Systems) Vacuum Blocks VCBL-B 18For Consoles from Biesse*
Vacuum Blocks VCBL-S 21For Consoles from SCM / Morbidelli*
Flat Table Systems 30Vacuum Blocks VCBL-G 32With Hose Connection, for Flat Tables
Innospann Vacuum Blocks 34With Hose Connection, for Flat Tables
Vacuum Blocks VCBL-T 36Hose-Free, for Flat Aluminum Tables
Clamping Equipment and Spare Parts
Order online now:www.schmalz.com
Contents
*Biesse and SCM / Morbidelli are registered and protected trademarks. The articles listed here are products of J. Schmalz GmbH that have been designed to fit CNC machining centers from these manufacturers.
Grid Table Systems 24Vacuum Blocks VCBL-R and 26Further Clamping Equipment For Grid Tables
Innospann Vacuum Blocks 28For Grid Tables
Vacuum Clamping System Innospann 38Steel-Plate 40Steel-Plate-T 42Accessories and Spare Parts 44Retrofitting Examples 45
Vacuum Clamping System Multi-Clamp 46Systems and Accessories 48
Modernization of CNC Machining Centers
Clamping Solutions for Manual Processing
Contact 51
VC_Holz_Katalog_EN_2016_EN 29.02.16 16:30 Seite 3
4
Whether you are using a 1-circuit or 2-circuit system, processing panels or producing window frames – consolevacuum blocks from Schmalz can be positioned preciselyand are quick and easy to replace when changing the order.Choose from our comprehensive program of high-qualityvacuum blocks and spare parts in original equipment manufacturer quality.
Efficiency Through Flexibility and Quality
Console Table Systems
Up to 950 N suction force and550 N horizontal force
Height of the vacuum blocksaccurate up to +/- 0.06 mm
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 4
5
Vacuum blocks VCBL-K2 forconsoles from Schmalz(p. 12)• For 2-circuit vacuum systems• Hose-free• Pre-fixation on the consolewith vacuum• Height 50, 75, 100 and 125 mm
Vacuum blocks VCBL-B for consoles from Biesse*(p. 18)• For 1-circuit vacuum systems• Hose-free• Pre-fixation in the vacuumblock mountings• Integrated touch valve• Height 29, 48 and 74 mm
Vacuum blocks VCBL-S for consoles from SCM / Morbidelli* (p. 21)• For 1-circuit vacuum systems• Hose-free• Mechanical pre-fixation onthe console• Integrated touch valve• Height 32.7 and 50 mm
Vacuum blocks VCBL-K1 forconsoles from Schmalz(p. 6)• For 1-circuit vacuum systems• Hose-free• Pre-fixation on the consolewith guide strips• Height 50, 100 and 125 mm
Introduction
Console Table Systems
www.schmalz.com/console-table
Design
Designation CodeDesignation code explained using the example of: VCBL-K2 125x75x100 D-360
VCBL-K2 125x75x100 D-360
Type Suction area L x B (length x width)
Height H
from 130 x 30 mmto 160 x 120 mm
from 29 mmto 125 mm
AS with lifting system
FI with fixing flap
L mounted lengthwise
Q mounted crosswise
TV with touch valve
S with hose connection
Product addition
VCBL-K2Vacuum block for Schmalz consoleswith 2-circuit vacuum system
VCBL-K1Vacuum block for Schmalz consoles with 1-circuit vacuum systemVCBL-BVacuum block for consoles from BiesseVCBL-SVacuum block for consoles from SCM / Morbidelli
125 x 75 mm 100 mm D-360 rotatable by 360°
*Biesse and SCM / Morbidelli are registered and protected trademarks. The articles listed here are products of J. Schmalz GmbH that have been designed to fit CNC machinig centers from these manufacturers.
Innospann system
1) Suction cup ISCUP
2) Mono-Base ISMB
3) Adapter-Plate ISAP-K2
4) Sealing magnet
1)
2)
3)
4)Mechanical clamp VCMC-K2
Vacuum block VCBL-K2
Example shows Schmalz 2-circuit consoles
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 5
• Plastic vacuum block with guide strips for Schmalz 1-circuit console• Top and bottom suction plates replaceable• The optional touch valve (TV) permits unused vacuum blocks to remain on the machine table
Application
Vacuum Block VCBL-K1 140x115
Vacuum block VCBL-K1 140x115x50
Vacuum block VCBLS-K1 140x115x50
Ordering data spare partsTypeTop suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateWearing parts set (guide strips + installation accessories)Wearing parts set (metal strips + installation accessories)Wearing parts set (touch valve + installation accessories)
• Plastic vacuum block with guide strips for Schmalz 1-circuit console• Top and bottom suction plates replaceable• The top part of the vacuum block is mounted crosswise (Q), lengthwise (L) or is rotatable by 360° (D-360) • The optional touch valve (TV) permits unused vacuum blocks to remain on the machine table
Vacuum Block VCBL-K1 125x75
Vacuum block VCBL-K1 125x75x50 L
Vacuum Blocks VCBL-K1 (1-Circuit Vacuum Systems)
Console Table Systems
Height 50 mm
Ordering data vacuum blockType Suction area L x B
[mm]140 x 115140 x 115140 x 115
Height H [mm] 505050
Part no.
10.01.12.0021010.01.12.0036910.01.12.00275
VCBL-K1 140x115x50VCBL-K1 140x115x50 TVVCBLS-K1 140x115x50*
Ordering data vacuum blockType Suction area L x B
[mm]125 x 75125 x 75125 x 75125 x 75125 x 75
Height H [mm] 5050505050
Part no.
10.01.12.0021110.01.12.0037010.01.12.0023010.01.12.0037110.01.12.00497
VCBL-K1 125x75x50 QVCBL-K1 125x75x50 Q TVVCBL-K1 125x75x50 LVCBL-K1 125x75x50 L TVVCBL-K1 125x75x50 D-360
*Top suction plate with two separate suction areas for the use of templates (not replaceable). Suction area 1 holds the tem-plate, suction area 2 clamps the workpiece onto the template.
www.schmalz.com/vcbl-k16
Part no.10.01.12.0048810.01.12.0350710.01.12.0022810.01.12.0125610.01.12.0061810.01.12.00920
Vacuum blocks VCBL-K1
• Hose-free vacuum clamping system for CNC machining centerswith console table (1-circuit system)• Provides damage-free clamping with the highest precision andholding force• The vacuum blocks are pre-fixed to the consoles via guide stripsand secured against movement during setup• Vacuum is used to clamp the vacuum blocks to the console andthe workpiece on the vacuum blocks at the same time
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 6
www.schmalz.com/vcbl-k1 7
Vacuum block VCBL-K1 120x50x50 L
Top suction plate with foam rubber seal
10.01.12.0001210.01.12.0022810.01.12.0125610.01.12.00618
• Plastic vacuum block with guide strips for Schmalz 1-circuit console, especially suitable for narrowworkpieces• Top suction plate replaceable completely or in individual components, bottom suction plate com-pletely replaceable• The top part of the vacuum block is mounted crosswise (Q), lengthwise (L) or is rotatable by 360°(D-360)
Vacuum Block VCBL-K1 130x30
Vacuum block VCBL-K1 130x30x50 Q
Ordering data spare partsType Part no.Top suction plate (supporting plate, sealing frame and friction plate)Top sealing frameTop friction plateBottom suction plateWearing parts set (guide strips + installation accessories)Wearing parts set (metal strips + installation accessories)
10.01.12.0070210.01.12.0080410.01.12.0080510.01.12.0022810.01.12.0125610.01.12.00618
Ordering data vacuum blockType Suction area L x B
[mm]130 x 30130 x 30130 x 30
Height H [mm] 505050
Part no.
10.01.12.0037910.01.12.0037810.01.12.01455
VCBL-K1 130x30x50 QVCBL-K1 130x30x50 LVCBL-K1 130x30x50 D-360
Vacuum Blocks VCBL-K1 (1-Circuit Vacuum Systems)
Console Table Systems
Height 50 mm
Vacuum Block VCBL-K1 125x75
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateWearing parts set (guide strips + installation accessories)Wearing parts set (metal strips + installation accessories)
10.01.12.0001110.01.12.0351110.01.12.0022810.01.12.0125610.01.12.00618
• Plastic vacuum block with guide strips for Schmalz 1-circuit console, suitable for narrow workpieces• Top and bottom suction plates replaceable• The top part of the vacuum block is mounted crosswise (Q), lengthwise (L) or is rotatable by 360°(D-360)
Vacuum Block VCBL-K1 120x50
Ordering data vacuum blockType Suction area L x B
[mm]120 x 50120 x 50120 x 50
Height H [mm] 505050
Part no.
10.01.12.0077010.01.12.0076910.01.12.00825
VCBL-K1 120x50x50 QVCBL-K1 120x50x50 LVCBL-K1 120x50x50 D-360
Ordering data spare partsType Part no.Top suction plateBottom suction plateWearing parts set (guide strips + installation accessories)Wearing parts set (metal strips + installation accessories)
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 7
www.schmalz.com/vcbl-k18
Vacuum Blocks VCBL-K1 (1-Circuit Vacuum Systems)
Console Table Systems
Height 50 mm
Ordering data spare partsType Part no.Wearing parts set (bolts + installation accessories) 10.01.12.01169
• Aluminum mechanical clamp for Schmalz 1-circuit console• For narrow and curved workpieces, such as frame parts • Pre-fixing on the console with a separate vacuum connection (hose outer diameter 6 mm)• Clamping force 700 N
Mechanical Clamp VCMC-K1 154x128
Ordering data mechanical clampType Dimensions
L x B x H [mm]154 x 128 x 50
Clamping range z[mm]12 – 80
Part no.
10.01.12.00781
Stroke [mm]10VCMC-K1 154x128x50 12-80Mechanical clamp VCMC-K1 154x128
• Adapter-Plate for flexible positioning of suction cups on Schmalz 1-circuit consoles• Especially suitable for narrow and curved workpieces • Mono-Bases serve as suction cup mountings• Pre-fixation by mechanical clamping• Application also possible in mixed operation with standard vacuum blocks
Adapter-Plate ISAP-K1
Ordering data Adapter-PlateType
Ordering data Mono-BaseType Dimensions L x B x H [mm]
80 x 80 x 2680 x 80 x 8
Part no.10.01.15.0021410.01.15.00188
ISMB 80x80x26 for ISAP-K1 300x200ISMB 80x80x8 for ISAP-K1 600x300
Adapter-Plate ISAP-K1 300x200x8
(shown here with Mono-Bases and
suction cups)
Ordering data suction cupType Suction area L x B
[mm]80 x 8080 x 4080 x 28
Height H [mm] 161616
Part no.
10.01.15.0020910.01.15.0021010.01.15.00211
ISCUP Cup 1 80x80x16 ISCUP Cup 2 80x40x16ISCUP Cup 3 80x28x16
ISAP-K1 300x200x8ISAP-K1 600x300x26 (XXL)
Dimensions L x B x H [mm]300 x 200 x 8600 x 300 x 26
Part no.10.01.14.0002510.01.14.00876
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 8
www.schmalz.com/vcbl-k1 9
• Plastic vacuum block with guide strips for Schmalz 1-circuit console • Top and bottom suction plates replaceable• The top part of the vacuum block is mounted crosswise (Q), lengthwise (L) or rotatable by 360° (D-360)
Vacuum Block VCBL-K1 125x75
Vacuum block VCBL-K1 125x75x100 Q
Ordering data spare partsType Part no.
10.01.12.0001110.01.12.0351110.01.12.0022810.01.12.00618
Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateWearing parts set (metal strips + installation accessories)
Ordering data vacuum blockType Suction area L x B
[mm]125 x 75125 x 75125 x 75125 x 75125 x 75
Height H[mm] 100100125125125
Part no.
10.01.12.0248210.01.12.0248310.01.12.0236410.01.12.0237010.01.12.02213
VCBL-K1 125x75x100 QVCBL-K1 125x75x100 LVCBL-K1 125x75x125 QVCBL-K1 125x75x125 LVCBL-K1 125x75x125 D-360
• Plastic vacuum block with guide strips for Schmalz 1-circuit console, suitable for narrow workpieces • Top and bottom suction plates replaceable• The top part of the vacuum block is mounted crosswise (Q), lengthwise (L) or is rotatable by 360°(D-360)
Vacuum Block VCBL-K1 120x50
Vacuum block VCBL-K1 120x50x125 Q
Ordering data vacuum block Type Suction area L x B
[mm]120 x 50120 x 50120 x 50120 x 50120 x 50
Height H[mm] 100100125125125
Part no.
10.01.12.0248410.01.12.0248510.01.12.0237110.01.12.0237210.01.12.02214
VCBL-K1 120x50x100 QVCBL-K1 120x50x100 LVCBL-K1 120x50x125 QVCBL-K1 120x50x125 LVCBL-K1 120x50x125 D-360
Vacuum Blocks VCBL-K1 (1-Circuit Vacuum Systems)
Console Table Systems
Height 100 mm and 125 mm
• Plastic vacuum block with guide strips for Schmalz 1-circuit console• Top and bottom suction plates replaceable
Vacuum Block VCBL-K1 140x115
Vacuum block VCBL-K1 140x115x125Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateWearing parts set (metal strips + installation accessories)
10.01.12.0048810.01.12.0350710.01.12.0022810.01.12.00618
Ordering data vacuum blockType Suction area L x B
[mm]140 x 115140 x 115
Height H[mm] 100125
Part no.
10.01.12.0248110.01.12.02363
VCBL-K1 140x115x100VCBL-K1 140x115x125
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 9
www.schmalz.com/vcbl-k110
• Plastic vacuum block with guide strips for Schmalz 1-circuit console, especially suitable for narrowworkpieces
• Top suction plate replaceable completely or in individual components, bottom suction plate completely replaceable
• The top part of the vacuum block is mounted crosswise (Q) or lengthwise (L)
Vacuum Block VCBL-K1 130x30
Vacuum block VCBL-K1 130x30x100 Q
Vacuum block VCBL-K1 160x120x125 L
Ordering data spare partsType Part no.Top sealing frameTop friction plateBottom suction plateWearing parts set (metal strips + installation accessories)Wearing parts set for H = 100 mm (supporting plate, sealing frame, friction plate)Wearing parts set for H = 125 mm (supporting plate, sealing frame, friction plate)
10.01.12.0080410.01.12.0080510.01.12.0022810.01.12.0061810.01.12.0072310.01.12.02348
Vacuum Block VCBL-K1 120x50
Ordering data spare partsType Part no.Top suction plateBottom suction plateWearing parts set (metal strips + installation accessories)
10.01.12.0001210.01.12.0022810.01.12.00618
Ordering data vacuum blockType Suction area L x B
[mm]130 x 30130 x 30130 x 30130 x 30
Height H [mm] 100100125125
Part no.
10.01.12.0248610.01.12.0248710.01.12.0237310.01.12.02374
VCBL-K1 130x30x100 QVCBL-K1 130x30x100 LVCBL-K1 130x30x125 QVCBL-K1 130x30x125 L
Vacuum block VCBL-K1 125x75x125 Q
• Aluminium vacuum block with guide strips for Schmalz 1-circuit console• Strong pre-fixation of vacuum block on the console• Special friction pad for rough and structured surfaces• Top and bottom sealing frame replaceable
Vacuum Block VCBL-K1 160x120 / 125x75 for Solid Woodworking
Ordering data spare partsType Part no.Top sealing frame for VCBL-K1 160x120Top sealing frame for VCBL-K1 125x75Bottom sealing frame
10.01.12.0324810.01.12.0324710.01.12.03246
Suction area L x B [mm]160 x 120125 x 75
Height H [mm] 125125
Part no.
10.01.12.0304210.01.12.03060
VCBL-K1 160x120x125 LVCBL-K1 125x75x125 Q
Vacuum Blocks VCBL-K1 (1-Circuit Vacuum Systems)
Console Table Systems
Height 100 mm and 125 mm
Ordering data vacuum blockType
VC_Holz_Katalog_EN_2016_EN 29.02.16 16:30 Seite 10
www.schmalz.com/vcbl-k1 11
Height 100 mm and 125 mm
Vacuum Blocks VCBL-K1 (1-Circuit Vacuum Systems)
Console Table Systems
• Aluminum mechanical clamp for Schmalz 1-circuit console• For narrow and curved workpieces, such as frame parts• Pre-fixation on the console via a separate vacuum connection (hose outer diameter 6 mm)• Clamping force 700 N
Mechanical Clamp VCMC-K1 154x128
Mechanical clamp VCMC-K1 154x128
Ordering data mechanical clampType Dimensions
L x B x H [mm]154 x 128 x 100154 x 128 x 125
Clamping range z[mm]
10 – 10010 – 100
Part no.
10.01.12.0331110.01.12.02497
Stroke [mm]4040
VCMC-K1 154x128x100 10-100VCMC-K1 154x128x125 10-100
Ordering data spare partsType Dimensions Ø x H [mm]
Ø 110 x 25Ø 110 x 14Ø 110 x 40
Part no.10.01.12.0193010.01.12.0198010.01.12.01936
Clamping disc, eccentric (standard)Clamping disc, eccentric (flat) Clamping disc, eccentric (high)
• Adapter-Plate for the flexible positioning of suction cups on Schmalz 1-circuit consoles• Especially suitable for narrow and curved workpieces • Mono-Bases serve as suction cup mountings, optionally with spacer ring for additional height• Application also possible in mixed operation with standard vacuum blocks
Adapter-Plate ISAP-K1
Adapter-Plate ISAP-K1 300x200x8
(shown here with Mono-Bases and
suction cups)
Ordering data suction cupTyp Suction area L x B
[mm]80 x 8080 x 4080 x 2880 x 8080 x 4080 x 28
Height H[mm] 161616303030
Part no.
10.01.15.0020910.01.15.0021010.01.15.0021110.01.15.0000310.01.15.0000410.01.15.00005
ISCUP Cup 1 80x80x16 ISCUP Cup 2 80x40x16ISCUP Cup 3 80x28x16ISCUP Cup 1 80x80x30ISCUP Cup 2 80x40x30ISCUP Cup 3 80x28x30
Ordering data Adapter-PlateType Dimensions L x B x H [mm]
300 x 200 x 8600 x 300 x 26
Part no.10.01.14.0002510.01.14.00876
ISAP-K1 300x200x8ISAP-K1 600x300x26 (XXL)
Ordering data Mono-BaseType Dimensions L x B x H [mm]
80 x 80 x 22Ø 80 x 36Ø 80 x 40Ø 80 x 61Ø 80 x 65
Part no.10.01.15.0000910.01.15.0060410.01.15.0004010.01.15.0060310.01.15.00602
ISMB 80x80x22Spacer ring ISZR-V 80x36Spacer ring ISZR-V 80x40Spacer ring ISZR-V 80x61Spacer ring ISZR-V 80x65
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 11
www.schmalz.com/vcbl-k212
Application
Vacuum blocks VCBL-K2
• Hose-free vacuum clamping system for CNC machining centerswith console table (2-circuit system)• The vacuum blocks are pre-fixed to the consoles and securedagainst movement during setup• Safe and precise clamping of the workpiece and the vacuumblocks on the console with the second vacuum• The optional touch valve (TV) enables unused vacuum blocks toremain on the machine table
• Plastic vacuum block for Schmalz 2-circuit console • Top and bottom suction plates replaceable• Optional lifting system (AS) for easier positioning of the workpiece
Vacuum Block VCBL-K2 140x115
Vacuum block VCBL-K2 140x115x100
Vacuum block VCBLS-K2 140x115x75
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateWearing parts set for lifting system AS (ball, socket and filter)Wearing parts set for lifting system AS (complete lifting system)Wearing parts set (metal strips + installation accessories)
10.01.12.0048810.01.12.0350710.01.12.0079810.01.12.0017310.01.12.0055410.01.12.00618
Ordering data vacuum blockType Suction area L x B
[mm]140 x 115140 x 115140 x 115140 x 115
Height H [mm] 10010010075
Part no.
10.01.12.0044510.01.12.0044610.01.12.0137310.01.12.00856
VCBL-K2 140x115x100VCBL-K2 140x115x100 ASVCBL-K2 140x115x100 TVVCBLS-K2 140x115x75*
Ordering data vacuum blockType Suction area L x B
[mm]125 x 75125 x 75125 x 75125 x 75125 x 75
Height H [mm] 100100100100100
Part no.
10.01.12.0044710.01.12.0119210.01.12.0050610.01.12.0127610.01.12.01079
VCBL-K2 125x75x100 QVCBL-K2 125x75x100 Q TVVCBL-K2 125x75x100 LVCBL-K2 125x75x100 L TVVCBL-K2 125x75x100 D-360
*Top suction plate with two separate suction areas for the use of templates (not replaceable). Suction area 1 holds the tem-plate, suction area 2 clamps the workpiece onto the template.
• Plastic vacuum block for Schmalz 2-circuit console • Top and bottom suction plates replaceable• The top part of the vacuum block is mounted crosswise (Q), lengthwise (L) or rotatable by 360° (D-360)
Vacuum Block VCBL-K2 125x75
Vacuum block VCBL-K2 125x75x100 Q
Vacuum Blocks VCBL-K2 (2-Circuit Vacuum Systems)
Console Table Systems
Height 100 mm
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 12
www.schmalz.com/vcbl-k2 13
• Plastic vacuum block for Schmalz 2-circuit console, suitable for narrow workpieces • Top and bottom suction plates replaceable• The top part of the vacuum block is mounted crosswise (Q), lengthwise (L) or is rotatable by 360° (D-360)
Vacuum Block VCBL-K2 120x50
Vacuum block VCBL-K2 120x50x100 L
Ordering data spare partsType Part no.Top suction plateBottom suction plateWearing parts set (metal strips + installation accessories)
10.01.12.0001210.01.12.0079810.01.12.00618
• Plastic vacuum block with guide strip for Schmalz 2-circuit console, especially suitable for narrowworkpieces • Top suction plate replaceable completely or in individual components, bottom suction plate com-pletely replaceable• The top part of the vacuum block is mounted crosswise (Q) or lengthwise (L)
Vacuum Block VCBL-K2 130x30
Vacuum block VCBL-K2 130x30x100 Q
Ordering data spare partsType Part no.Top suction plate (supporting plate, sealing frame, friction plate, O-ring and fastening screws)Top sealing frameTop friction plateBottom suction plateWearing parts set (metal strips + installation accessories)
10.01.12.0072310.01.12.0080410.01.12.0080510.01.12.0079810.01.12.00618
Vacuum Blocks VCBL-K2 (2-Circuit Vacuum Systems)
Console Table Systems
Height 100 mm
Ordering data vacuum blockType Suction area L x B
[mm]120 x 50120 x 50120 x 50120 x 50120 x 50
Height H [mm] 100100100100100
Part no.
10.01.12.0012610.01.12.0177710.01.12.0085310.01.12.0177610.01.12.01020
VCBL-K2 120x50x100 QVCBL-K2 120x50x100 Q TVVCBL-K2 120x50x100 LVCBL-K2 120x50x100 L TVVCBL-K2 120x50x100 D-360
Ordering data vacuum blockType Suction area L x B
[mm]130 x 30130 x 30
Height H [mm] 100100
Part no.
10.01.12.0085410.01.12.00855
VCBL-K2 130x30x100 QVCBL-K2 130x30x100 L
Vacuum Block VCBL-K2 125x75
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateWearing parts set (metal strips + installation accessories)
10.01.12.0001110.01.12.0351110.01.12.0079810.01.12.00618
Top suction plate with foam rubber seal
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 13
14
Vacuum Block VCBL-K2 160x120 / 125x75 for Solid Woodworking
Vacuum block VCBL-K2 160x120x100 L
Mechanical clamp
VCMC-K2 154x128x100 10-100 FI
Ordering data vacuum blockType Dimensions L x B
[mm]160 x 12075 x 125
Height H [mm] 100100
Part no.
10.01.12.0320410.01.12.03201
VCBL-K2 160x120x100 LVCBL-K2 125x75x100 Q
Ordering data vacuum blockType Part no.Top sealing frame for VCBL-K2 160x120Top sealing frame for VCBL-K2 125x75Bottom sealing frame
10.01.12.0324810.01.12.0324710.01.12.02191
• Adapter-Plate for flexible positioning of suction cups on Schmalz 2-circuit consoles• Especially suitable for narrow and curved workpieces• Mono-Bases serve as suction cup mountings, mixed operation with standard vacuum blocks possible
Adapter-Plate ISAP-K2
Adapter-Plate ISAP-K2 200x200x28
(shown here with Mono-Bases and
suction cups)
Ordering data Mono-BaseType Suction area L x B
[mm]80 x 8080 x 4080 x 28
Height H [mm] 303030
Part no.
10.01.15.0000310.01.15.0000410.01.15.00005
ISCUP Cup 1 80x80x30ISCUP Cup 2 80x40x30ISCUP Cup 3 80x28x30
Ordering data Adapter-PlateType Dimensions L x B x H [mm]
200 x 200 x 28600 x 300 x 28
Part no.10.01.14.0002910.01.14.00897
ISAP-K2 200x200x28ISAP-K2 600x300x28 (XXL)
Ordering data Mono-BaseType Dimensions L x B x H [mm]
80 x 80 x 42Part no.
10.01.15.00078ISMB 80x80x42
• Aluminum mechanical clamp for Schmalz 2-circuit console, Clamping force 700 N• For narrow and curved workpieces, such as frame parts• Pre-fixing on the console via vacuum or optional fixing flap (FI)
Mechanical Clamp VCMC-K2 154x128
Ordering data mechanical clampType Dimensions
L x B x H [mm]154 x 128 x 100154 x 128 x 100
Clamping range z[mm]
10 – 10010 – 100
Stroke[mm]4040
Part no.
10.01.12.0188510.01.12.01962
VCMC-K2 154x128x100 10-100VCMC-K2 154x128x100 10-100 FI
Ordering data spare partsType Part no.Clamping disc, eccentric (standard)Clamping disc, eccentric (flat) Clamping disc, eccentric (high)Fixing flap
10.01.12.0193010.01.12.0198010.01.12.0193610.01.12.02122
Dimensions Ø x H [mm]Ø 110 x 25Ø 110 x 14Ø 110 x 40
-
Vacuum Blocks VCBL-K2 (2-Circuit Vacuum Systems)
Console Table Systems
Height 100 mm
• Aluminium vacuum block for Schmalz 2-circuit console• Special friction pad for rough and structured surfaces, sealing frame replaceable
www.schmalz.com/vcbl-k2
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 14
www.schmalz.com/vcbl-k2 15
Vacuum block VCBL-K2 140x115x50
Vacuum block VCBL-K2 125x75x75 Q
Top suction plate with foam rubber seal
Vacuum Blocks VC-K2 (2-Circuit Vacuum Systems)
Console Table Systems
Height 50 mm, 75 mm and 125 mm
*Top suction plate with two separate suction areas for the use of templates (not replaceable). Suction area 1 holds the tem-plate, suction area 2 clamps the workpiece onto the template.
• Plastic vacuum block for Schmalz 2-circuit console with replaceable suction plates• The optional touch valve (TV) enables unused vacuum blocks to remain on the machine table
Vacuum Block VCBL-K2 140x115
Ordering data vacuum blockType Suction area L x B
[mm]140 x 115140 x 115140 x 115140 x 115140 x 115140 x 115140 x 115
Height H[mm] 5050757512512550
Part no.
10.01.12.0062610.01.12.0062710.01.12.0213610.01.12.0219510.01.12.0211610.01.12.0212810.01.12.00636
VCBL-K2 140x115x50VCBL-K2 140x115x50 TVVCBL-K2 140x115x75VCBL-K2 140x115x75 TVVCBL-K2 140x115x125VCBL-K2 140x115x125 TVVCBLS-K2 140x115x50*
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateWearing parts set (touch valve + installation accessories)Wearing parts set (metal strips + installation accessories)
10.01.12.0048810.01.12.0350710.01.12.0079810.01.12.0092010.01.12.00618
• Plastic vacuum block for Schmalz 2-circuit console with replaceable suction plates• The top part of the vacuum block is mounted crosswise (Q), lengthwise (L) or is rotatable by 360°(D-360)• The optional touch valve (TV) enables unused vacuum blocks to remain on the machine table
Vacuum Block VCBL-K2 125x75
Ordering data vacuum blockType Suction area
L x B [mm]125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75125 x 75
Height H[mm] 50505050507575757575125125125125125
Part no.
10.01.12.0064410.01.12.0062810.01.12.0064510.01.12.0063710.01.12.0062910.01.12.0219910.01.12.0220010.01.12.0220110.01.12.0220210.01.12.0221110.01.12.0211810.01.12.0212410.01.12.0212910.01.12.0213210.01.12.02593
VCBL-K2 125x75x50 QVCBL-K2 125x75x50 LVCBL-K2 125x75x50 Q TVVCBL-K2 125x75x50 L TVVCBL-K2 125x75x50 D-360VCBL-K2 125x75x75 QVCBL-K2 125x75x75 LVCBL-K2 125x75x75 Q TVVCBL-K2 125x75x75 L TVVCBL-K2 125x75x75 D-360VCBL-K2 125x75x125 Q VCBL-K2 125x75x125 L VCBL-K2 125x75x125 Q TVVCBL-K2 125x75x125 L TVVCBL-K2 125x75x125 D-360
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateWearing parts set (metal strips + installation accessories)
10.01.12.0001110.01.12.0351110.01.12.0079810.01.12.00618
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 15
www.schmalz.com/vcbl-k216
Vacuum Block VCBL-K2 120x50
Ordering data vacuum blockType Suction area L x B [mm]
120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50
Height H [mm] 5050507575757575125125125125125
Part no.10.01.12.0077210.01.12.0077110.01.12.0087410.01.12.0220310.01.12.0220410.01.12.0220510.01.12.0220610.01.12.0221210.01.12.0211910.01.12.0212510.01.12.0213010.01.12.0213310.01.12.02594
VCBL-K2 120x50x50 Q VCBL-K2 120x50x50 L VCBL-K2 120x50x50 D-360VCBL-K2 120x50x75 Q VCBL-K2 120x50x75 L VCBL-K2 120x50x75 Q TV VCBL-K2 120x50x75 L TV VCBL-K2 120x50x75 D-360VCBL-K2 120x50x125 Q VCBL-K2 120x50x125 L VCBL-K2 120x50x125 Q TV VCBL-K2 120x50x125 L TV VCBL-K2 120x50x125 D-360
Vacuum Block VCBL-K2 130x30
Vacuum block VCBL-K2 130x30x75 Q
Ordering data vacuum blockType Suction area L x B [mm]
130 x 30130 x 30130 x 30130 x 30130 x 30130 x 30130 x 30130 x 30130 x 30130 x 30
Height H [mm] 505075757575125125125125
Part no.10.01.12.0064610.01.12.0064710.01.12.0220710.01.12.0220810.01.12.0220910.01.12.0221010.01.12.0212010.01.12.0212610.01.12.0213110.01.12.02134
VCBL-K2 130x30x50 Q VCBL-K2 130x30x50 L VCBL-K2 130x30x75 Q VCBL-K2 130x30x75 L VCBL-K2 130x30x75 Q TV VCBL-K2 130x30x75 L TV VCBL-K2 130x30x125 Q VCBL-K2 130x30x125 L VCBL-K2 130x30x125 Q TVVCBL-K2 130x30x125 L TV
Ordering data spare partsType Part no.Top suction plateBottom suction plateWearing parts set (metal strips + installation accessories)
10.01.12.0001210.01.12.0079810.01.12.00618
Ordering data spare partsType Part no.Top suction plate for H = 50 mm (supporting plate, sealing frame, friction plate, O-ring and fastening screws)Top suction plate for H = 75/125 mm (supporting plate, sealing frame, friction plate, O-ring and fastening screws)Top sealing frameTop friction plateBottom suction plateWearing parts set (metal strips + installation accessories)
10.01.12.00702
10.01.12.02348
10.01.12.0080410.01.12.0080510.01.12.0079810.01.12.00618
Height 50 mm, 75 mm and 125 mm
• Plastic vacuum block for Schmalz 2-circuit console, suitable for narrow workpieces • The top part of the vacuum block is mounted crosswise (Q), lengthwise (L) or is rotatable by 360° (D-360)• The optional touch valve (TV) enables unused vacuum blocks to remain on the machine table
Vacuum block VCBL-K2 120x50x75 Q
Vacuum Blocks VCBL-K2 (2-Circuit Vacuum Systems)
Console Table Systems
• Plastic vacuum block for Schmalz 2-circuit console, suitable for especially narrow workpieces • The top part of the vacuum block is mounted crosswise (Q) or lengthwise (L)• The optional touch valve (TV) enables unused vacuum blocks to remain on the machine table
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 16
www.schmalz.com/vcbl-k2 17
• Aluminum mechanical clamp for Schmalz 2-circuit console• For narrow and curved workpieces, such as frame parts• Pre-fixing on the console with vacuum• Clamping force 700 N
Mechanical Clamp VCMC-K2 154x128
Mechanical clamp VCMC-K2 154x128
Ordering data mechanical clampType Dimensions
L x B x H [mm]154 x 128 x 50154 x 128 x 75154 x 128 x 125
Clamping range z [mm]
12 – 8012 – 8010 – 100
Stroke[mm]
101040
Part no.
10.01.12.0073710.01.12.0221810.01.12.02217
VCMC-K2 154x128x50 12-80VCMC-K2 154x128x75 12-80VCMC-K2 154x128x125 10-100
Ordering data spare parts*Type Part no.Clamping disc, eccentric (standard)Clamping disc, eccentric (flat) Clamping disc, eccentric (high)
10.01.12.0193010.01.12.0198010.01.12.01936
Dimensions Ø x H [mm]Ø 110 x 25Ø 110 x 14Ø 110 x 40
*Only suitable for type VCMC-K2 154x128x125 10-100
• Adapter-Plate for flexible positioning of suction cups on Schmalz 2-circuit consoles• Especially suitable for narrow and curved workpieces• Mono-Bases serve as suction cup mountings, optionally with spacer ring for additional height• Application also possible in mixed operation with standard vacuum blocks
Adapter-Plate ISAP-K2
Ordering data suction cupType Suction area L x B
[mm]80 x 8080 x 4080 x 28
Height H [mm]
161616
Part no.
10.01.15.0020910.01.15.0021010.01.15.00211
ISCUP Cup 1 80x80x16 ISCUP Cup 2 80x40x16ISCUP Cup 3 80x28x16
Ordering data Adapter-PlateType Dimensions L x B x H [mm]
200 x 200 x 26600 x 300 x 26
Part no.10.01.14.0011710.01.14.01061
ISAP-K2 200x200x26ISAP-K2 600x300x26 (XXL)
Ordering data Mono-BaseType Dimensions L x B x H [mm]
80 x 80 x 8Ø 80 x 25Ø 80 x 75
Part no.10.01.15.0018810.01.15.0029510.01.15.00489
ISMB 80x80x8Spacer ring ISZR-V 80x25Spacer ring ISZR-V 80x75
Adapter-Plate ISAP-K2 200x200x26
(shown here with Mono-Bases and
suction cups)
Vacuum Blocks VCBL-K2 (2-Circuit Vacuum Systems)
Console Table Systems
Height 50 mm, 75 mm and 125 mm
VC_Holz_Katalog_EN_2016_EN 29.02.16 16:30 Seite 17
www.schmalz.com/vcbl-b18
Applications
Vacuum blocks VCBL-B
• Hose-free vacuum clamping system from Schmalz for consoletables from Biesse
• Fully compatible with the original vacuum blocks• The vacuum blocks can be inserted in any direction in15° increments in the standard mountings from Biesse
• Clamping straps on the vacuum block ring and magnets ensuresecure fixation in the vacuum block mounting
• The vacuum blocks are available in heights of 29 mm and 48 mm(for 3 and 4-axis machines) and 74 mm (for 5-axis machines)
• Plastic vacuum block for the vacuum block mountings from Biesse• Top suction plate can be replaced individually• The optional touch valve (TV) enables unused vacuum blocks to remain on the machine table
Vacuum Block VCBL-B 140x130
Vacuum block VCBL-B 140x130x74 TV
Ordering data vacuum blockType Height H
[mm]294874
Part no.
10.01.12.0316510.01.12.0316910.01.12.03173
VCBL-B 140x130x29 TVVCBL-B 140x130x48 TVVCBL-B 140x130x74 TV
• Plastic vacuum block for the vacuum block mountings from Biesse• Top suction plate can be replaced individually• The optional touch valve (TV) enables unused vacuum blocks to remain on the machine table
Vacuum Block VCBL-B 125x75
Vacuum block VCBL-B 125x75x74 TV
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesTouch valve TV 4.3Adapter ring
10.01.12.0001110.01.12.0351110.01.12.0251410.01.12.03345
Ordering data vacuum blockType Suction area L x B
[mm]125 x 75125 x 75125 x 75
Height H [mm]
294874
Part no.
10.01.12.0316610.01.12.0317010.01.12.03174
VCBL-B 125x75x29 TV VCBL-B 125x75x48 TV VCBL-B 125x75x74 TV
*Biesse is a registered and protected trademark. The articles listed here areproducts of J. Schmalz GmbH that have been designed to fit CNC machiningcenters from Biesse.
Suction area L x B[mm]
140 x 130140 x 130140 x 130
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesTouch valve TV 4.3Adapter ring
10.01.12.0232510.01.12.0350610.01.12.0251410.01.12.03345
Vacuum Blocks VCBL-B for Consoles from Biesse*
Console Table Systems
Height 29 mm, 48 mm and 74 mm
VC_Holz_Katalog_EN_2016_EN 29.02.16 16:30 Seite 18
www.schmalz.com/vcbl-b 19
• Plastic vacuum block for the vacuum block mountings from Biesse, suitable for narrow workpieces• Top suction plate can be replaced individually• The optional touch valve (TV) enables unused vacuum blocks to remain on the machine table
Vacuum Block VCBL-B 120x50
Vacuum block VCBL-B 120x50x29 TV
Ordering data spare partsType Part no.Top suction plateTouch valve TV 4.3Adapter ring
10.01.12.0001210.01.12.0251410.01.12.03345
Ordering data vacuum block Type Suction area L x B
[mm]120 x 50120 x 50120 x 50
Height H[mm] 294874
Part no.
10.01.12.0316710.01.12.0317110.01.12.03175
VCBL-B 120x50x29 TV VCBL-B 120x50x48 TV VCBL-B 120x50x74 TV
• Plastic vacuum block for the vacuum block mountings from Biesse, especially suitable for narrowworkpieces• Top suction plate can be replaced completely or individually• The optional touch valve (TV) enables unused vacuum blocks to remain on the machine table
Vacuum Block VCBL-B 130x30
Vacuum block VCBL-B 130x30x74 TV
• Aluminum mechanical clamp for the vacuum block mountings from Biesse• Suitable for narrow and curved workpieces e.g. frame parts• Pre-fixation in the vacuum block mounting using screws • Clamping force 700 N
Mechanical Clamp VCMC-B
Mechanical clamp
VCMC-B 130x130x74 25-100
Ordering data spare partsType Part no.
10.01.12.0234810.01.12.0143810.01.12.0251410.01.12.03345
Ordering data vacuum block Type Suction area L x B
[mm]130 x 30130 x 30130 x 30
Height H[mm] 294874
Part no.
10.01.12.0316810.01.12.0317210.01.12.03176
VCBL-B 130x30x29 TV VCBL-B 130x30x48 TV VCBL-B 130x30x74 TV
Ordering data mechanical clampType Dimensions
Ø x H [mm]130 x 130 x 74
Clamping range z[mm]
25 – 100
Stroke [mm]40
Part no.
10.01.12.03129VCMC-B 130x130x74 25-100
Vacuum Blocks VCBL-B for Consoles from Biesse
Console Table Systems
Height 29 mm, 48 mm and 74 mm
Top suction plateTop friction plateTouch valve TV 4.3Adapter ring
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 19
www.schmalz.com/vcbl-b20
Vacuum Blocks VCBL-B for Console Tables from Biesse
Console Tables-Systems
Height 29 mm, 48 mm und 74 mm
• Adapter-Plate for the flexible positioning of suction cups on consoles from Biesse• Especially suitable for narrow and bent workpieces• The Mono-Base serves as a suction cup mounting, a spacer ring for additional height is optional• Application also possible in mixed operation with standard vacuum blocks
Adapter-Plate ISAP-B 195x195
Adapter-Plate ISAP-B 195x195
(shown here with Mono-Bases and
suction cups)
All VCBL-B types (p. 18 – 20) suitable
for this vacuum block mounting
Ordering data suction cupType Suction area L x B
[mm]80 x 8080 x 4080 x 28
Height H [mm] 161616
Part no.
10.01.15.0020910.01.15.0021010.01.15.00211
ISCUP Cup 1 80x80x16 ISCUP Cup 2 80x40x16ISCUP Cup 3 80x28x16
Ordering data Adapter-PlateType Dimensions L x B x H [mm]
195 x 195 x 5Part no.
10.01.14.00109ISAP-B 195x195x5
Ordering data Mono-BaseType Dimensions L x B x H [mm]
80 x 80 x 8Ø 80 x 19Ø 80 x 45
Part no.10.01.15.0018810.01.15.0038810.01.15.00054
ISMB 80x80x8Zwischenring ISZR-V 80x19Zwischenring ISZR-V 80x45
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 20
Application
• Hose-free vacuum clamping system from Schmalz for consoletables from SCM / Morbidelli• Flexible and inexpensive alternative to the original vacuumblocks; suction plates can be replaced individually when worn• The vacuum blocks are pre-fixed to the console• The integrated touch valve (TV) enables unused vacuum blocksto remain on the machine table• TV system from SCM = S1 system from Schmalz (width of the mounting 72.5 mm)• TVS system from SCM = S1…TV-S system from Schmalz withhose connection (width of the mounting 72.5 mm) • TVN system from SCM = S4 system from Schmalz (width of the mounting 109 mm)
www.schmalz.com/vcbl-s 21
*SCM / Morbidelli is a registered and protected trademark. The articles listed here are products of J. Schmalz GmbH that havebeen designed to fit CNC machining centers from SCM / Morbidelli.
Vacuum blocks VCBL-S
• Plastic vacuum block for TV and TVS systems from SCM / Morbidelli
Vacuum Block VCBL-S 120x120
Vacuum block VCBL-S1 120x120x32.7 TVOrdering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesTouch valve TV 4.3Bottom sealing frame S1**
10.01.12.0001010.01.12.0134110.01.12.0251410.01.12.02499
Ordering data vacuum blockType Suction area L x B
[mm]120 x 120120 x 120120 x 120
Height H [mm]32.732.750
Part no.
10.01.12.0231710.01.12.0238610.01.12.02969
• Plastic vacuum block for TVN systems from SCM / Morbidelli
Vacuum Block VCBL-S 140x130
Vacuum block VCBL-S4 140x130x50 TV
Application in mixed operation
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesTouch valve TV 4.3Bottom sealing frame S4**
10.01.12.0232510.01.12.0350610.01.12.0251410.01.12.03138
Ordering data vacuum blockType Suction area L x B
[mm]140 x 130
Height H [mm] 50
Part no.
10.01.12.02321VCBL-S4 140x130x50 TV
**from model year 2015
**from model year 2015
Vacuum Blocks VCBL-S for Consoles from SCM / Morbidelli*
Console Table Systems
Height 32.7 mm and 50 mm
VCBL-S1 120x120x32.7 TVVCBL-S1 120x120x32.7 TV-SVCBL-S1 120x120x50 TV
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 21
www.schmalz.com/vcbl-s22
• Plastic vacuum block for TV, TVS and TVN systems from SCM / Morbidelli
Vacuum Block VCBL-S 125x75
Vacuum block VCBL-S4 125x75x50
D-360 TV
*from model year 2015
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesTouch valve TV 4.3Bottom sealing frame S1*Bottom sealing frame S1 for D-360 versionBottom sealing frame S4*Bottom sealing frame S4 for D-360 version
10.01.12.0001110.01.12.0351110.01.12.0251410.01.12.0249910.01.14.0012410.01.12.0313810.01.14.00235
Ordering data vacuum blockType Suction area L x B [mm]
125 x 75125 x 75125 x 75125 x 75125 x 75
Height H [mm]32.732.732.75050
Part no.10.01.12.0231810.01.12.0238710.01.12.0130210.01.12.0232210.01.12.01473
VCBL-S1 125x75x32.7 TVVCBL-S1 125x75x32.7 TV-SVCBL-S1 125x75x32.7 D-360 TVVCBL-S4 125x75x50 TVVCBL-S4 125x75x50 D-360 TV
• Plastic vacuum block for TV, TVS and TVN systems from SCM / Morbidelli• Suitable for narrow workpieces
Vacuum Block VCBL-S 120x50
Vacuum block VCBL-S1 120x50x32.7
TV-S
Ordering data spare partsType Part no.Top suction plateTouch valve TV 4.3Bottom sealing frame S1/S4
Ordering data vacuum blockType Suction area L x B [mm]
120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50120 x 50
Height H [mm]32.732.732.750505050
Part no.10.01.12.0231910.01.12.0238810.01.12.0130110.01.12.0259110.01.12.0227110.01.12.0232310.01.12.01474
VCBL-S1 120x50x32.7 TVVCBL-S1 120x50x32.7 TV-SVCBL-S1 120x50x32.7 D-360 TVVCBL-S1 120x50x50 TVVCBL-S1 120x50x50 D-360 TVVCBL-S4 120x50x50 TVVCBL-S4 120x50x50 D-360 TV
• Plastic vacuum block for TV, TVS and TVN systems from SCM / Morbidelli• Suitable especially for narrow workpieces
Vacuum Block VCBL-S 130x30
Vacuum block VCBL-S1 130x30x32.7 TV
Ordering data vacuum blockType Suction area L x B [mm]
130 x 30130 x 30130 x 30130 x 30130 x 30130 x 30
Height H [mm]32.732.732.7505050
Part no.10.01.12.0232010.01.12.0238910.01.12.0130010.01.12.0294510.01.12.0232410.01.12.01475
VCBL-S1 130x30x32.7 TVVCBL-S1 130x30x32.7 TV-SVCBL-S1 130x30x32.7 D-360 TVVCBL-S1 130x30x50 TVVCBL-S4 130x30x50 TVVCBL-S4 130x30x50 D-360 TV
Vacuum Blocks VCBL-S for Consoles from SCM / Morbidelli
Console Table Systems
Height 32.7 mm and 50 mm
10.01.12.0001210.01.12.02514
See VCBL-S 125x75
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 22
www.schmalz.com/vcbl-s 23
Vacuum Blocks VCBL-S for Consoles from SCM / Morbidelli
Console Table Systems
Height 32.7 mm and 50 mm
Ordering data spare partsType Part no.Top sealing frameTop friction plateWearing parts set (suction plate and touch valve + installation accessories)Touch valve TV 4.3Bottom sealing frame S1*Bottom sealing frame S1 for D-360 versionBottom sealing frame S4*Bottom sealing frame S4 for D-360 version
10.01.12.0080410.01.12.0143810.01.12.0154310.01.12.0251410.01.12.0249910.01.14.0012410.01.12.0313810.01.14.00235
Vacuum Block VCBL-S 130x30
• Aluminum mechanical clamp for TV, TVS and TVN systems from SCM / Morbidelli• For narrow and curved workpieces, such as frame parts
Mechanical Clamp VCMC-S
Mechanical clamp
VCMC-S4 145x145x50
Ordering data mechanical clampType Dimensions
L x B x H [mm]120 x 120 x 50120 x 120 x 50145 x 145 x 50
Clamping range z*[mm]
12 – 8012 – 8012 – 80
Stroke [mm]
101010
Part no.
10.01.12.0176810.01.12.0227510.01.12.01481
VCMC-S1 120x120x50VCMC-S1 120x120x50 S**VCMC-S4 145x145x50*Clamping force 700 N **With hose connection for hose diameter 10-8
*Only suitable for type S4
• Adapter-Plate ISAP-S can accommodate up to four suction cup mountings Mono-Base • Application possible in mixed operation with standard vacuum blocks• Type S1 and type S4 suitable for TV / TVN consoles from SCM / Morbidelli
Adapter-Plate ISAP-S 195x195
Adapter-Plate ISAP-S1 195x195x8.7
Ordering data suction cupType Suction area L x B
[mm]80 x 8080 x 4080 x 28
Height H [mm]
161616
Part no.
10.01.15.0020910.01.15.0021010.01.15.00211
ISCUP Cup 1 80x80x16 ISCUP Cup 2 80x40x16ISCUP Cup 3 80x28x16
Ordering data Adapter-PlateType Dimensions L x B x H [mm]
195 x 195 x 8,7195 x 195 x 11
Part no.10.01.14.0012310.01.14.00231
ISAP-S1 195x195x8.7ISAP-S4 195x195x11
Ordering data Mono-BaseType Dimensions L x B x H [mm]
80 x 80 x 8Ø 80 x 15
Part no.10.01.15.0018810.01.15.00052
ISMB 80x80x8Spacer ring ISZR-V 80x15*
Ordering data spare partsType Part no.Bottom sealing frame S1Bottom sealing frame S4
10.01.14.0012410.01.14.00235
*from model year 2015
VC_Holz_Katalog_EN_2016_EN 29.02.16 16:30 Seite 23
www.schmalz.com/24
Schmalz vacuum blocks for grid tables enable simple andflexi ble use; without complex installation. The non-slip fix-ings enable secure clamping of the workpieces even withhigh machining forces. This makes them ideal for complexfive-axis applications without a wear plate.
For Efficient Five-Axis Processing onGrid Tables
Grid Table Systems
Up to 1,500 N suction forceand 900 N horizontal force
Height of the vacuum blocksaccurate up to +/- 0.1 mm
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:16 Seite 24
25
Introduction
Grid Table Systems
Vacuum blocks VCBL-R (p. 26)• For all common grid tables • Fixation via positioning inserts• Integrated touch valve• Height 25, 45 and 125 mm
Vacuum blocks VCBL-B (p. 27)• For all common grid tables • Requires an adapter ring ISAP-R as vacuum block mounting• Integrated touch valve• Various heights possible
Innospann vacuum blocksfor grid tables (p. 28)• For all common grid tables • Consisting of a suction cupmounting and a suction cup • Various heights possible
Design
Designation CodeDesignation code explained using the example of: VCBL-R 160x160x45 30/50 TV
Innospann vacuum blocks
1) Suction cup ISCUP
2) Mono-Base ISMB
3) Mini-Plate ISMP-R
4) Sealing magnet
1)
2)
1)
2)
3)
4)
Vacuum blocks VCBL-B
1) Vacuum block VCBL-B
2) Adapter ring ISAP-R
Vacuum blocks VCBL-R
VCBL-R 160x160x45 30/50 TV
Type Suction area L x B (length x width)
Height H
from 130 x 30 mm to 160 x 160 mm
from 25 mmto 125 mm
Suitable for grid dimensions
30 x 30 mm40 x 40 mm50 x 50 mm
Product addition
VCBL-RVacuum block for grid tables
VCBL-BVacuum block for mounting with adapter ring ISAP-R
160 x 160 mm 45 mm TV with touchvalve
30 x 30 mm and 50 x 50 mm
www.schmalz.com/grid-table
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 25
www.schmalz.com/vcbl-r26
Height 25 mm, 45 mm and 125 mm
Application
Vacuum Block VCBL-R 110x110 / 160x160
Ordering data vacuum blockType Suction area L x B
[mm]110 x 110 160 x 160160 x 160160 x 160160 x 160160 x 160
VCBL-R 110x110x45 30 TVVCBL-R 160x160x45 30/50 TVVCBL-R 160x160x45 40 TVVCBL-R 160x160x25 30/50 TVVCBL-R 160x160x25 40 TVVCBL-R 160x160x125 30 TV
Part no.Spare parts set (6x positioning inserts, fastening screws)Spare parts set (seals, 4x friction pad)Touch valve TV 4.3
10.01.12.0269110.01.12.0269310.01.12.02514
Vacuum block VCBL-R 160x160x45
30/50 TV
Vacuum block VCBL-R for complex five-axis machining
• Vacuum clamping system for CNC machining centers with grid table
• Suitable for all common grid geometries(slot width 6 mm to 7.5 mm, slot depth 6 mm to 7 mm)
• Suitable for complex five-axis machining, such as the productionof recesses and the trimming of panels
• Simple and fast positioning of the vacuum blocks with thecorres ponding positioning inserts
• Safe and non-slip clamping of the workpiece with the specialfriction pad on the suction area
• Plastic vacuum block with positioning insert for all common grid tables, suitable for narrow workpieces
• The integrated touch valve (TV) enables unused vacuum blocks to remain on the machine table• Heights 25 mm, 45 mm and 125 mm
Vacuum Block VCBL-R 160x96
Ordering data vacuum blockType Suction area L x B
[mm]160 x 96160 x 96160 x 96160 x 96160 x 96
Height H [mm]
45452525125
For grid dimensions[mm]
30 x 30 / 50 x 5040 x 40
30 x 30 / 50 x 5040 x 40
30 x 30 / 50 x 50
Part no.
10.01.12.0267210.01.12.0267310.01.12.0267610.01.12.0267710.01.12.03422
VCBL-R 160x96x45 30/50 TVVCBL-R 160x96x45 40 TVVCBL-R 160x96x25 30/50 TVVCBL-R 160x96x25 40 TVVCBL-R 160x96x125 30/50 TV
Vacuum block VCBL-R 160x96x45
30/50 TV
• Plastic vacuum block with positioning insert for all common grid tables• The integrated touch valve (TV) enables unused vacuum blocks to remain on the machine table• Heights 25 mm, 45 mm and 125 mm
Height H[mm4545452525125
For grid dimensions[mm]
30 x 3030 x 30 / 50 x 50
40 x 4030 x 30 / 50 x 50
40 x 4030 x 30
Part no.
10.01.12.0288310.01.12.0267010.01.12.0267110.01.12.0267410.01.12.0267510.01.12.03249
Vacuum Blocks VCBL-R and Further Clamping Equipment
Grid Table Systems
Ordering data spare partsType
VC_Holz_Katalog_EN_2016_EN 29.02.16 16:30 Seite 26
Ordering data adapter ringType
• Mounting for vacuum block VCBL-B, suitable for all common grid geometries (slot dimensions 6 x 6 mm to 7 x 7 mm)
• Vacuum blocks can be rotated in increments of 15°
Adapter Ring ISAP-R for Vacuum Block VCBL-B
• Aluminum mechanical clamp for narrow and curved workpieces, such as frame parts• Is placed directly in the grid without an additional adapter ring• Clamping force 700 N, clamping range from 12 mm to 80 mm*
Mechanical Clamp ISMC-R
www.schmalz.com/vcbl-r 27
10.01.12.0269110.01.12.0269310.01.12.02514
Height H [mm]
29292929
Part no.
10.01.12.0316510.01.12.0316610.01.12.0316710.01.12.03168
VCBL-B 140x130x29 TVVCBL-B 125x75x29 TVVCBL-B 120x50x29 TVVCBL-B 130x30x29 TV
Dimensions L x B x H [mm]
130 x 130 x 16160 x 160 x 16
For grid dimensions[mm]
30 x 30 / 40 x 4050 x 50
Part no.
10.01.15.0027910.01.15.00296
ISAP-R 130x130x16 30/40 ISAP-R 160x160x16 50
Vacuum block VCBL-B 120x50x29 TV
(shown here with adapter ring)
Adapter ring ISAP-R 130x130x16
Ordering data mechanical clampType Dimensions
L x B x H [mm]120 x 120 x 45175 x 175 x 45212 x 212 x 45130 x 130 x 100
For grid dimensions[mm]
30 x 3050 x 5040 x 40
30 x 30 / 40 x 40
Stroke[mm]
10101040
Part no.
10.01.12.0294210.01.15.0024410.01.12.0172010.01.12.02705
Mechanical clamp ISMC-R
*10 mm to 100 mm for ISMC-R 130x130x100**Only suitable for aluminum grid tables
Height 25 mm, 45 mm and 125 mm
Vacuum Blocks VCBL-R and Further Clamping Equipment
Grid Table Systems
Ordering data spare partsType Part no.Spare parts set (6x positioning inserts, fastening screws)Spare parts set (seals, 4x friction pad)Touch valve TV 4.3
Vacuum Block VCBL-R 160x96
• Plastic vacuum block• To be used in combination with an adapter ring ISAP-R as vacuum block mounting (effective working height 45 mm)
• Top suction plate replaceable• The integrated touch valve (TV) enables unused vacuum blocks to remain on the machine table• Ordering data spare parts see page 18
Vacuum Block VCBL-B
Ordering data vacuum blockType Suction area L x B
[mm]140 x 130125 x 75120 x 50130 x 30
ISMC-R 120x120x45 12-80 30**ISMC-R 175x175x45 12-80 50ISMC-R 212x212x45 12-80 40ISMC-R 130x130x100 10-100 30/40
VC_Holz_Katalog_EN_2016_EN 29.02.16 16:30 Seite 27
Innospann Vacuum Blocks for Grid Tables
Grid Table Systems
Application
Innospann vacuum blocks for grid tables, freely positionable on the Mini-Plate ISMP-R
• Flexible vacuum clamping system for CNC machining centerswith grid table• Suitable for complex five-axis machining• The suction cup mountings are placed directly in the grid andfitted with suctions cups in accordance to the workpiece • Variable effective working height through various suction cupheights and optional spacer rings
www.schmalz.com/is-r28
• Mounting possibility for a single suction cup• The suction cups used are continuously rotatable• Suitable for grid geometries with slot dimensions from 5 x 5 mm to 7 x 7 mm
Step 1: Select Suction Cup Mounting
Mono-Base ISMB-R
Ordering data Mono-BaseType Dimensions
L x B x H [mm]96 x 96 x 1590 x 90 x 15
110 x 110 x 15
For grid dimensions [mm]
15 x 15 / 30 x 3040 x 4050 x 50
Part no.
10.01.15.0028610.01.15.0038010.01.15.00372
ISMB-R 96x96x15 15/30 ISMB-R 90x90x15 40x40ISMB-R 110x110x15 50x50
Ordering data Mono-BaseType Dimensions
L x B x H [mm]175 x 175 x 15
For grid dimensions [mm]
30 x 30 / 50 x 50
Part no.
10.01.15.00183ISQB-R 175x175x15 30/50
Odering data spare partsType Dimensions
L x B x H [mm]Ø 80 x 4
For grid dimensions [mm]
-
Part no.
10.01.15.00083Cover for Quad-Base
• Mounting possibility for up to four suction cups• The suction cups used are continuously rotatable• Includes covers for unused mountings• Suitable for grid geometries with slot dimensions from 6 x 6 mm to 7 x 7 mm
Mono-Base ISMB-R
Quad-Base ISQB-R
Quad-Base ISQB-R (shown here with
suction cups)
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 28
www.schmalz.com/is-r 29
Accessories and spare parts for Innospann systems can be found on page 44.
Step 2: Select Suction Cup
Step 3: Select Accessories and Spare Parts
Suction Cups ISCUP
Suction cup ISCUP Cup 2 80x40x30
(shown here with Mono-Base)
*Only for Mono-Base ISMB-R suction cup mounting
• Plastic suction cup for Innospann suction cup mountings• Top sealing frame and friction plate replaceable• The optional touch valve (TV) enables unused vacuum blocks to remain on the machine table
Ordering data suction cupType Suction area L x B
[mm]80 x 8080 x 8080 x 4080 x 4080 x 28
100 x 100100 x 100
Height H [mm]
30303030303030
Part no.
10.01.15.0000310.01.15.0030310.01.15.0000410.01.15.0030510.01.15.0000510.01.15.0040310.01.15.00405
ISCUP Cup 1 80x80x30ISCUP Cup 1 80x80x30 TVISCUP Cup 2 80x40x30ISCUP Cup 2 80x40x30 TVISCUP Cup 3 80x28x30ISCUP Cup 4 100x100x30*ISCUP Cup 4 100x100x30 TV*
Innospann Vacuum Blocks for Grid Tables
Grid Table Systems
Ordering data Mini-PlateType Dimensions L x B x H
[mm]175 x 175 x 7
For grid dimensions [mm]
30 x 30 / 50 x 50
Part no.
10.01.15.00184ISMP-R 175x175x7 30/50 5/7
Ordering data Mono-Base for Mini-Plate ISMP-RType Dimensions L x B x H
[mm]80 x 80 x 8
For grid dimensions[mm]
-
Part no.
10.01.15.00188ISMB 80x80x8
• Mounting possibility for up to four suction cups• Mono-Bases ISMB required as suction cup mountings, can be positioned freely on the Mini-Plate• With workpieces with a larger working surface, multiple Mini-Plates can be placed edge to edge• Unused vacuum openings are closed with sealing magnets• Suitable for grid geometries with slot dimensions from 6 x 6 mm to 7 x 7 mm
Mini-Plate ISMP-R
Mini-Plate ISMP-R (shown here with
Mono-Bases and suction cups)
VC_Holz_Katalog_EN_2016_EN 29.02.16 16:30 Seite 29
30
Schmalz clamping solutions enable the fast and easy setup ofCNC machining centers with flat table. First the vacuumblocks and then the workpiece are fixed for machining viatwo independent vacuum circuits. Schmalz provides vacuumblocks with a hose connection for universal flat tables and ahose-free version for flat aluminum tables with an integratedvacuum distribution.
Quick and Simple Setup on Flat Surfaces
Flat Table Systems
Up to 850 N suction force and500 N horizontal force
Height of the vacuum blocksaccurate up to +/- 0.06 mm
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 30
31
Introduction
Flat Table Systems
Vacuum blocks VCBL-G withhose connection (p. 32)• For flat tables with 2-circuitvacuum system• Pre-fixation and fixationwith vacuum• Height 100 mm
Innospann vacuum blocks for flat tables with hose connection (p. 34)• For flat tables with 2-circuitvacuum system• Consisting of suction cup andsuction cup mounting• Pre-fixation and fixationwith vacuum• Various heights possible
Vacuum blocks VCBL-T hose-free (p. 36)• For flat aluminum tables • Pre-fixation and fixationwith vacuum• Height 100 mm
Design
Designation CodeDesignation code explained using the example of: VCBL-G 120x120x100 AS
Vacuum blocks VCBL-T
For flat aluminum tables
1)
2)
3)
Innospann vacuum blocks for flat tables
1) Suction cup ISCUP
2) Quad-Base ISQB-G
3) Cover for unused mountings
Vacuum blocks VCBL-G
For flat tables
VCBL-G 120x120x100 AS
Type Suction area L x B (length x width)
Height H
from 130 x 30 mmto 140 x 115 mm
100 mm SH with clamping lever
Product addition
VCBL-GVacuum block for flat tables
VCBL-TVacuum block for flat aluminum tables
120 x 120 mm 100 mm AS with lifting system
www.schmalz.com/flat-table
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 31
www.schmalz.com/vcbl-g32
Vacuum Blocks VCBL-G for Flat Tables
Flat Table Systems
• Plastic vacuum block with hose connection and optional touch valve (TV)• Top and bottom suction plates replaceable• Optional lifting system (AS) for easier positioning of the workpiece
Application
Vacuum Block VCBL-G 120x120
• Plastic vacuum block with hose connection and optional touch valve (TV)• Top and bottom suction plates replaceable
Vacuum block VCBL-G 120x120x100
Vacuum blocks VCBL-G
• Universal vacuum clamping system with hose connection forCNC machining centers with flat table (2-circuit system)• Hose nozzle diameter 10 mm• Enables damage-free clamping with highest precision andholding force
Vacuum Block VCBL-G 125x75
Vacuum block VCBL-G 125x75x100
Height 100 mm
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateWearing parts set for lifting system AS (ball, socket and filter)Wearing parts set for lifting system AS (complete system)Hose set (2 x 1.5 m hose)
10.01.12.0001010.01.12.0134110.01.12.0006310.01.12.0017310.01.12.0055410.01.12.00203
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom suction plateHose set (2 x 1.5 m hose)
10.01.12.0001110.01.12.0351110.01.12.0006310.01.12.00203
Ordering data vacuum blockType Suction area L x B
[mm]120 x 120120 x 120120 x 120120 x 120
Height H[mm]100100100100
Part no.
10.01.12.0005310.01.12.0005410.01.12.0090510.01.12.00419
VCBL-G 120x120x100VCBL-G 120x120x100 ASVCBL-G 120x120x100 TVVCBL-G 120x120x100 AS+TV
Ordering data vacuum blockType Suction area L x B
[mm]125 x 75125 x 75
Height H[mm]100100
Part no.
10.01.12.0005610.01.12.00906
VCBL-G 125x75x100VCBL-G 125x75x100 TV
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 32
www.schmalz.com/vcbl-g 33
• Plastic vacuum block with hose connection, especially suitable for narrow workpieces• Top suction plate replaceable completely or in individual components, bottom suction plate completely replaceable
Vacuum Block VCBL-G 130x30
Vacuum block VCBL-G 130x30x100Ordering data spare partsType Part no.Top suction plate (supporting plate, sealing frame, friction plate, O-ring and fastening screws)Top sealing frameTop friction plateBottom suction plateHose set (2 x 1.5 m hose)
10.01.12.0072310.01.12.0080410.01.12.0080510.01.12.0006310.01.12.00203
Ordering data vacuum blockType Suction area L x B
[mm]130 x 30
Height H [mm] 100
Part no.
10.01.12.00059VCBL-G 130x30x100
• Plastic vacuum block with hose connection, suitable for narrow workpieces• Top and bottom suction plates replaceable
Vacuum Block VCBL-G 120x50
Vacuum block VCBL-G 120x50x100Ordering data spare partsType Part no.Top suction plateBottom suction plateHose set (2 x 1.5 m hose)
Ordering data vacuum blockType Suction area L x B
[mm]120 x 50
Height H[mm]100
Part no.
10.01.12.00055VCBL-G 120x50x100
Vacuum Blocks VCBL-G for Flat Tables
Flat Table Systems
Height 100 mm
• Aluminum mechanical clamp with hose connection (hose outer diameter 8 mm)• For narrow and curved workpieces, such as frame parts• Clamping force 700 N
Mechanical Clamp VCMC-G 154x128
Mechanical clamp VCMC-G 154x128
Ordering data spare partsTyp Part no.Clamping disc, eccentric (standard)Clamping disc, eccentric (flat) Clamping disc, eccentric (high)
10.01.12.0193010.01.12.0198010.01.12.01936
Dimensions Ø x H [mm]Ø 110 x 25.5Ø 110 x 14Ø 110 x 40.5
Ordering data mechanical clampType Dimensions L x B x H
[mm]154 x 128 x 85154 x 128 x 100
Clamping range z[mm]
25 – 10010 – 100
Stroke [mm]2540
Part no.
10.01.12.0199510.01.12.01997
VCMC-G 154x128x85 25-100VCMC-G 154x128x100 10-100
10.01.12.0001210.01.12.0006310.01.12.00203
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 33
www.schmalz.com/is-g34
Vacuum Blocks VCBL-G for Flat Tables
Flat Table Systems
Innospann Vacuum Blocks for Flat Tables
Further Flat Table Systems
Application
Innospann on a flat table vacuum blocks for clamping frame parts
• Flexible vacuum clamping system with hose connection for CNCmachining centers with flat table• The suction cup mountings Mono-Base and Quad-Base areequipped with two vacuum connections and can be positionedfreely on the machine table • The suction cup mountings are pre-fixed onto the machine tablewith the first vacuum circuit• The second connection is used for the safe and precise clampingof the workpiece• Variable effective working height through various suction cupheights and optional spacer rings
• Plastic vacuum block with hose connection• Bottom suction plate replaceable, top suction plate not replaceable• Top suction plate with two separate suction areas for the use of templates; suction area 1 holdsthe template, suction area 2 clamps the workpiece onto the template
Vacuum Block VCBLS-G 140x115 for Templates
Vacuum block VCBLS-G 140x115x75
10.01.12.00063
Ordering data vacuum blockType Suction area L x B
[mm]140 x 115
Height H [mm] 75
Part no.
10.01.12.00875VCBLS-G 140x115x75
Ordering data spare partsType Part no.Bottom suction plate
www.schmalz.com/vcbl-g
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 34
www.schmalz.com/is-g 35
Innospann Vacuum Blocks for Flat Tables
Flat Table Systems
• Mounting possibility for a single suction cup with hose connection• The suction cups used are continuously rotatable
Step 1: Select Suction Cup Mounting
Mono-Base ISMB-G
Ordering data Mono-BaseType Dimensions L x B x H [mm]
80 x 80 x 5580 x 80 x 70
Part no.10.01.15.0012810.01.15.00156
ISMB-G 80x80x55ISMB-G 80x80x70
Ordering data Quad-BaseType Dimensions L x B x H [mm]
175 x 175 x 22Part no.
10.01.15.00007ISQB-G 175x175x22
• Mounting possibility for up to four suction cups, with hose connection• The suction cups used are continuously rotatable• Includes covers for unused mountings
Mono-Base ISMB-G
• Plastic suction cup for Innospann suction cup mountings• Top sealing frame and friction plate replaceable
Step 2: Select Suction Cup
Step 3: Select Accessories and Spare Parts
Suction Cups ISCUP
Suction cups ISCUP Cup 1 and 3 (shown
here with Mono-Base)
Quad-Base ISQB-G
Quad-Base ISQB-G (shown here with
suction cups)
Ordering data suction cupType Suction area L x B
[mm]80 x 8080 x 4080 x 28
Height H [mm]303030
Part no.
10.01.15.0000310.01.15.0000410.01.15.00005
ISCUP Cup 1 80x80x30ISCUP Cup 2 80x40x30ISCUP Cup 3 80x28x30
Accessories and spare parts for Innospann systems are found on page 44.
Odering data spare partsType Dimensions L x B x H [mm]
Ø 80 x 4Part no.
10.01.15.00083Cover for Quad-Base
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 35
www.schmalz.com/vcbl-t36
Vacuum Blocks VCBL-T for Flat Aluminum Tables
Flat Table Systems
• Hose-free plastic vacuum block• Top suction plate and bottom sealing frame replaceable• Optional lifting system (AS) for easier positioning of the workpiece
Application
Vacuum Block VCBL-T 120x120
• Hose-free plastic vacuum block• Top suction plate and bottom sealing frame replaceable
Vacuum block VCBL-T 120x120x100 AS
Vacuum blocks VCBL-T
• Hose-free vacuum clamping system for flat aluminum tableswith integrated vacuum line • The vacuum blocks can be positioned and pre-fixed freely on the machine table in accordance with the workpiece • The workpieces are then clamped safely and precisely for machining
Vacuum Block VCBL-T 125x75
Vacuum block VCBL-T 125x75x100
Height 100 mm
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom sealing frameWearing parts set for lifting system AS (ball, socket and filter)Wearing parts set for lifting system AS (complete system)
10.01.12.0001010.01.12.0134110.01.12.0001310.01.12.0017310.01.12.00554
Ordering data spare partsType Part no.Top suction plateTop suction plate with foam rubber seal for rough surfacesBottom sealing frame
10.01.12.0001110.01.12.0351110.01.12.00013
Ordering data vacuum blockType Suction area L x B
[mm]120 x 120120 x 120
Height H [mm]100100
Part no.
10.01.12.0000110.01.12.00002
VCBL-T 120x120x100VCBL-T 120x120x100 AS
Ordering data vacuum blockType Suction area L x B
[mm]125 x 75
Height H[mm]100
Part no.
10.01.12.00003VCBL-T 125x75x100
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 36
www.schmalz.com/vcbl-t 37
Vacuum Blocks VCBL-T for Flat Aluminum Tables
Flat Table Systems
Height 100 mm
• Hose-free plastic vacuum block, suitable for narrow workpieces• Top suction plate and bottom sealing frame replaceable• Optional mechanical clamping lever (SH) for additional clamping of narrow workpieces
Vacuum Block VCBL-T 120x50
Vacuum block VCBL-T 120x50x100 SH
Ordering data spare partsType Part no.Top suction plateBottom sealing frame
10.01.12.0001210.01.12.00013
• Hose-free plastic vacuum block, especially suitable for narrow workpieces• Top suction plate replaceable completely or in individual components, bottom suction plate completely replaceable
Vacuum Block VCBL-T 130x30
Vacuum block VCBL-T 130x30x100Ordering data spare partsType Part no.Top suction plate (supporting plate, sealing frame, friction plate, O-ring and fastening screws)Top sealing frameTop friction plateBottom sealing frame
10.01.12.0072310.01.12.0080410.01.12.0080510.01.12.00013
• Plastic vacuum block with hose connection• Bottom sealing frame replaceable, top suction plate not replaceable• Top suction plate with two separate suction areas for the use of templates; suction area 1 holdsthe template, suction area 2 clamps the workpiece onto the template
Vacuum Block VCBLS-T 140x115 for Templates
Vacuum block VCBLS-T 140x115x75
Ordering data spare partsType Part no.Bottom sealing frame 10.01.12.00013
Ordering data vacuum blockType Suction area L x B
[mm]120 x 50120 x 50
Height H [mm]100100
Part no.
10.01.12.0000410.01.12.00009
VCBL-T 120x50x100VCBL-T 120x50x100 SH
Ordering data vacuum blockType Suction area L x B
[mm]130 x 30
Height H[mm]100
Part no.
10.01.12.00117VCBL-T 130x30x100
Ordering data vacuum blockType Suction area L x B
[mm]140 x 115
Height H [mm]75
Part no.
10.01.12.00005VCBLS-T 140x115x75
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 37
www.schmalz.com/38
The vacuum clamping system Innospann enables every CNCmachining center to be retrofitted independently of manu -facturer or type. Modernization facilitates fast and flexiblechangeover with frequent product changes – for efficientmanufacturing processes starting from batch size ”one“.Schmalz thus provides an economic alternative to investmentin a new machine.
Modernization of CNC Machining Centers
Vacuum Clamping System Innospann
Up to 80 percent lower setup times
Up to 50 percent higher holding force
Height of the vacuum blocksaccurate up to +/- 0.1 mm
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 38
www.schmalz.com/innospann 39
Introduction
Vacuum Clamping System Innospann
Solutions by Retrofitting the Machine TableThe machine table is retrofitted by installing a Steel-Plate on a grid plate. For grid tables, the existing grid can beused. Flat and console tables require an intermediate plate with grid. The grid can also be milled directly into aflat table. The integrated vacuum grooves avoid separate hosing. The vacuum blocks can be freely positioned onthe Steel-Plate.
Innospann Steel-Plate and Steel-Plate-T (p. 40)
Innospann Steel-Plate(-T)
• Of high-quality stainless steelor galvanized steel
• Integrated vacuum openings• A laser grid provides orientationassistance when positioning thevacuum blocks
Sealing magnets(Steel-Plate)
• For unused vacuum openings
• Steel-Plate-T with auto-matically activated mag-netic valves
Suction cup mountings
• Mono-Base: mountingpossibility for a singlesuction cup
• Quad-Base: mountingpossibility for up to foursuction cups
Suction cups
• Various geometriesavailable (also as amechanical clamp)
Sealing gasket
• Seals the vacuum system reliably
Innospann vacuum blocks for grid tables (p. 28)
Innospann vacuum blocks for flat tables(p. 34)
Vacuum blocks and Adapter-Plates forconsole tables (p. 6)
Grid table
• With flat and console tables,an additional grid plate isrequired (customer-side)
Solutions Without Retrofitting the Machine TableAs an alternative to a complete retrofit, Schmalz provides vacuum block models which can be set directly onto theexisting machine table. The Adapter-Plate for console tables provides additional flexibility in the positioning ofthe vacuum blocks.
VC_Holz_Katalog_EN_2016_EN 29.02.16 16:30 Seite 39
www.schmalz.com/steel-plate40
Steel-Plate
Vacuum Clamping System Innospann
Application
Innospann Steel-Plate with Mono-Bases and suction cups
• Vacuum clamping system for retrofitting CNC machining centerswith flat, grid or console table• Facilitates efficient and flexible batch size ”one“and smallseries production especially for the manufacture of furniture• The suction cup mountings Mono-Base and Quad-Base are fitted with suction cups and can be positioned freely on theSteel-Plate • A lasered grid of coordinates provides orientation assistance• Unused vacuum openings can be closed manually using sealingmagnets• Variable total height through various suction cup heights andoptional spacer rings
• 3 mm stainless-steel or galvanized steel (LC) plate with integrated vacuum openings• Individually adapted to the machine table
Step 1: Select Steel-Plate
Steel-Plate
Steel-Plate
Step 2: Select Suction Cup Mounting
• Mounting possibility for a single suction cup• Suction cups are continuously rotatable
Mono-Base ISMB
Ordering data Mono-BaseType Dimensions L x B x H [mm]
80 x 80 x 880 x 80 x 2280 x 80 x 4280 x 80 x 67
Part no.10.01.15.0018810.01.15.0000910.01.15.0007810.01.15.00079
ISMB 80x80x8ISMB 80x80x22ISMB 80x80x42ISMB 80x80x67Mono-Base ISMB (shown here with
suction cups)
Ordering data Steel-PlateType Dimensions
L x B [mm]variablevariablevariablevariable
Valve interval [mm]
approx. 75approx. 75approx. 150approx. 150
Part no.
on requeston requeston requeston request
Steel-Plate for Mono-BaseSteel-Plate-LC for Mono-BaseSteel-Plate for Quad-BaseSteel-Plate-LC for Quad-Base
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 40
www.schmalz.com/steel-plate 41
Steel-Plate
Vacuum Clamping System Innospann
• Mounting possibility for up to four suction cups• Suction cups are continuously rotatable• Includes covers for unused mountings
Quad-Base ISQB
Ordering data Quad-BaseType Dimensions L x B x H [mm]
175 x 175 x 22Part no.
10.01.15.00001ISQB 175x175x22
Quad-Base ISQB (shown here with
suction cups)
Step 3: Select Clamping Equipment
• Plastic suction cup for Innospann suction cup mountings• Sealing frame and friction plate are simple and quick to replace• Further suction cup heights available as accessories
Suction Cups ISCUP
Suction cup ISCUP Cup 2 80x40x30
• Mechanical clamp for narrow and curved workpieces, such as frame parts• Can be placed and positioned directly on the Steel-Plate (no suction cup mounting required)• Clamping force 700 N, Clamping range 12-80 mm
Mechanical Clamp ISMC-S
Mechanical clamp ISMC-S 175x175
Ordering data mechanical clampType Dimensions
L x B x H [mm]175 x 175 x 52175 x 175 x 72175 x 175 x 97
Total height incl.Steel-Plate [mm]
5575100
Part no.
10.01.15.0027010.01.15.0014010.01.15.00254
Stroke [mm]101010
ISMC-S 175x175x52 12-80ISMC-S 175x175x72 12-80ISMC-S 175x175x97 12-80
Accessories and spare parts for Innospann systems can be found on page 44.
Step 4: Select Accessories and Spare Parts
Ordering data suction cupType Suction area L x B
[mm]80 x 8080 x 4080 x 28
100 x 100
Height H[mm]30303030
Part no.
10.01.15.0000310.01.15.0000410.01.15.0000510.01.15.00403
ISCUP Cup 1 80x80x30ISCUP Cup 2 80x40x30ISCUP Cup 3 80x28x30ISCUP Cup 4 100x100x30
Odering data spare partsType Dimensions L x B x H [mm]
Ø 80 x 4Part no.
10.01.15.00083Cover for Quad-Base
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 41
www.schmalz.com/steel-plate-t42
Steel-Plate-T
Vacuum Clamping System Innospann
Application
Innospann Steel-Plate-T with Mono-Bases and suction cups
• Vacuum clamping system for retrofitting CNC machining centerswith flat, grid or console tables• Facilitates efficient and flexible single piece and small seriesproduction especially for the manufacture of furniture • The suction cup mountings Mono-Base and Quad-Base are fit-ted with suction cups and can be positioned freely on the Steel-Plate-T• A lasered grid of coordinates provides orientation assistance• Unused vacuum openings are sealed automatically thanks tointegrated magnetic valves• Variable total height through various suction cup heights andoptional spacer rings
• 3 mm stainless-steel or galvanized steel (LC) plate with integrated magnetic valves • Individually adapted to the machine table
Step 1: Select Steel-Plate-T
Steel-Plate-T
Steel-Plate-T
Step 2: Select Suction Cup Mounting
• Mounting possibility for a single suction cup• Suction cups are continuously rotatable
Mono-Base ISMB-T
Ordering data Mono-BaseType Dimensions L x B x H [mm]
80 x 80 x 2280 x 80 x 4280 x 80 x 67
Part no.10.01.15.0014510.01.15.0015410.01.15.00155
ISMB-T 80x80x22ISMB-T 80x80x42ISMB-T 80x80x67
Mono-Base ISMB-T (shown here with
suction cups)
Ordering data Steel-Plate-TType Dimensions
L x B [mm]variablevariablevariablevariable
Valve interval [mm]
approx. 75approx. 75approx. 150approx. 150
Part no.
on requeston requeston requeston request
Steel-Plate-T for Mono-BaseSteel-Plate-T-LC for Mono-BaseSteel-Plate-T for Quad-BaseSteel-Plate-T-LC for Quad-Base
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 42
www.schmalz.com/steel-plate-t 43
Steel-Plate-T
Vacuum Clamping System Innospann
• Mounting possibility for up to four suction cups• Suction cups are continuously rotatable• Includes covers for unused mountings
Quad-Base ISQB-T
Ordering data Quad-BaseType Dimensions L x B x H [mm]
175 x 175 x 22Part no.
10.01.15.00153ISQB-T 175x175x22
Quad-Base ISQB-T (shown here with
suction cups)
Step 3: Select Clamping Equipment
• Plastic suction cup for Innospann suction cup mountings• Sealing frame and friction plate are simple and quick to replace• Further suction cup heights available as accessories
Suction Cups ISCUP
Suction cup ISCUP Cup 2 80x40x30
• Mechanical clamp for narrow and curved workpieces, such as frame parts• Can be placed and positioned directly on the Steel-Plate-T (no suction cup mounting required)• Clamping force 700 N, clamping range 12– 80 mm
Mechanical Clamp ISMC-ST
Mechanical clamp ISMC-ST 175x175
Ordering data mechanical clampType Dimensions
L x B x H [mm]175 x 175 x 52175 x 175 x 72175 x 175 x 97
Total height incl.Steel-Plate-T [mm]
5575100
Part no.
10.01.15.0027310.01.15.0027210.01.15.00256
Stroke [mm]101010
ISMC-ST 175x175x52 12-80ISMC-ST 175x175x72 12-80ISMC-ST 175x175x97 12-80
Accessories and spare parts for Innospann systems can be found on page 44.
Step 4: Select Accessories and Spare Parts
Ordering data suction cupType Suction area L x B
[mm]80 x 8080 x 4080 x 28
100 x 100
Height H[mm]30303030
Part no.
10.01.15.0000310.01.15.0000410.01.15.0000510.01.15.00403
ISCUP Cup 1 80x80x30ISCUP Cup 2 80x40x30ISCUP Cup 3 80x28x30ISCUP Cup 4 100x100x30
Odering data spare partsType Dimensions L x B x H [mm]
Ø 80 x 4Part no.
10.01.15.00083Cover for Quad-Base
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 43
Type DimensionsL x B [mm]
66 x 6666 x 2666 x 1486 x 86Ø 11
Part no.
10.01.15.0001710.01.15.0001810.01.15.0001910.01.15.0040210.07.01.00085
For suction cup 80x80For suction cup 80x40For suction cup 80x28For suction cup 100x100Filter for friction plate
Friction Plates for Suction Cups
*Sealing frame made from foam rubber**Touch valve mounted with hollow screw for Innospann suction cups
www.schmalz.com/innospann44
Type Part no.
10.01.15.0020910.01.15.0021010.01.15.0021110.01.15.0000310.01.15.0037510.01.15.0000410.01.15.0037610.01.15.0000510.01.15.0052110.01.15.0040310.01.15.0030310.01.15.0030510.01.15.0040510.01.15.0026610.01.15.0019510.01.15.0034710.01.15.00083
Type DimensionsL x B x H [mm]Ø 80 x 19.580 x 50 x 7080 x 50 x 95 80 x 50 x 120
Part no.
10.01.15.0038410.01.15.0001210.01.15.0001310.01.15.00014
Vacuum stop, stroke = 19 mmMagnetic stop, H = 70 mm Magnetic stop, H = 95 mmMagnetic stop, H = 120 mm
Type Dimensions Øx H [mm]Ø 80 x 15Ø 80 x 20 Ø 80 x 34Ø 80 x 40Ø 80 x 45Ø 80 x 48
Part no.
10.01.15.0005210.01.15.0005310.01.15.0022810.01.15.0007310.01.15.0005410.01.15.00055
Spacer ring ISZR-V 80x15Spacer ring ISZR-V 80x20Spacer ring ISZR-V 80x34Spacer ring ISZR-V 80x40Spacer ring ISZR-V 80x45 Spacer ring ISZR-V 80x48
Limit Stop Systems
Type DimensionsL x B [mm]
81 x 8181 x 4381 x 31
100 x 100
Part no.
10.01.15.0002010.01.15.0002110.01.15.0002210.01.15.00404
For suction cup 80x80For suction cup 80x40For suction cup 80x28For suction cup 100x100
Type Dimensions[mm]
10 x 4 x 1,000Ø 8 x 1,000
Part no.
10.01.15.0006210.07.04.00002
For suction cupsFor underside of Quad-Base
Sealing Frames for Suction Cups
• Provides additional clamping height for suction cups
Spacer Rings
• Provides easy and accurate workpiece positioning
Type DimensionsØ [mm]
19
25
-
Part no.
10.01.14.00847
10.01.15.00133
10.01.15.00056
Sealing magnets set for Steel-Plateand Adapter-Plate (qty: 4)Magnetic valve for Steel-Plate-T(qty: 1)Cleaning magnet for Steel-Plate-T(qty: 1)
Sealing Magnets and Magnetic Valves
• To seal unused vacuum opening
ISCUP Cup 1 80x80x16ISCUP Cup 2 80x40x16ISCUP Cup 3 80x28x16ISCUP Cup 1 80x80x30ISCUP Cup 1 80x80x30 MOS*ISCUP Cup 2 80x40x30ISCUP Cup 2 80x40x30 MOS*ISCUP Cup 3 80x28x30ISCUP Cup 2 80x40x30 MOS*ISCUP Cup 4 100x100x30ISCUP Cup 1 80x80x30 TVISCUP Cup 2 80x40x30 TVISCUP Cup 4 100x100x30 TVISCUP 80x80x30 ASISCUP 80x80x45 ASWearing parts set VST*Cover for Quad-Base
Suctionarea L x B
[mm]80 x 8080 x 40 80 x 2880 x 8080 x 8080 x 4080 x 4080 x 2880 x 28
100 x 10080 x 8080 x 40
100 x 10080 x 8080 x 80
-Ø 80
Accessories and Spare Parts
Vacuum Clamping System Innospann
Suction cup with friction plate (1),
sealing frame (2) and touch valve (3)
Magnetic stop (1) and vacuum stop (2) Sealing magnet (1) and magnetic valve (2)Spacer ring
Suction Cups ISCUP Sealing Gaskets
HeightH
[mm]161616303030303030303030303045-4
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 44
www.schmalz.com/innospann 45
Innospann Steel-Plate | Retrofitting of a console table with Steel-Plate, Mono-Basesand diverse suction cups
Innospann Steel-Plate-T | Retrofitting of a flat table with Steel-Plate-T, Quad-Basesand diverse suction cups
Innospann Steel Plate-T | Retrofitting of a console table with Innospann Steel-Plate-T, Mono-Bases and suction cups
Innospann Steel-Plate-T | Retrofitting of a flat table with Steel-Plate-T, Mono-Basesand diverse suction cups, fixed on an intermediate plate
Innospann Steel-Plate | Retrofitting of a grid table with Steel-Plate, Mono-Basesand diverse suction cups
Retrofitting Examples
Vacuum Clamping System Innospann
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 45
46
The vacuum clamping system Multi-Clamp is the perfect toolfor quick and flexible clamping of small and medium-sizedworkpieces. They can be fixed in any position and processedall-round. The Multi-Clamp is portable and can be used in avariety of industrial, workshop and building-site contexts.
Manual Fixing and Machining of Workpieces
Vacuum Clamping SystemMulti-Clamp
Rotatable 360° for flexiblefive-side machining
Portable for mobile use
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 46
www.schmalz.com/multi-clamp 47
Introduction
Vacuum Clamping System Multi-Clamp
Application
• Multi-functional vacuum clamping system for manual machin-ing steps, such as sawing, grinding, drilling or screwing• Use to machine of small to medium-sized workpieces and theassembly of compact components• Workpieces can be fixed in any position and machined all-round without the need to reclamp • The Multi-Clamp can be secured to almost any even surface(using screws or by vacuum) and is suitable for mobile use
Complete system Multi-Clamp VC-M
DesignThe vacuum clamping system Multi-Clamp consists of a suction plate and the rotating and swiveling unit Multi-Base. The vacuum is generated via an integrated vacuum ejector or an external vacuum pump.
Continuously slewable 360° for flexibleall-round machining
Continuously rotatable 90° for the simpleprocessing of planes and edges
Base plate for screwing to the workbench(optional fixing with vacuum)
Multi-Clamp suction plate160 x 160 mm; for almost any workpiece
Rotating and swiveling unitMulti-BaseFig. shows Multi-Base VC-M-B
Multi-Clamp suction plate roundØ 210 mm; for wooden workpieces
Multi-Clamp suction plate oval200 x 55 mm and 300 x 100 mm; for narrow or lengthy workpieces
Clamping lever for quickly changing of theMulti-Clamp suction plate
Connection for compressed air supply
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 47
www.schmalz.com/multi-clamp48
Multi-Clamp Suction Plate as Stand-Alone Solution
• Multi-Clamp suction plate VC-M-SP with integrated vacuum generation (ejector)• Multi-Clamp suction plate VC-M-SPV for operation with external vacuum generation (e.g. Multi-Clamp vacuum pump)
Multi-Clamp Suction Plate VC-M-SP / VC-M-SPV
Multi-Clamp suction plate
VC-M-SP 160x160
Systems and Accessories
Vacuum Clamping System Multi-Clamp
Ordering data suction plateType Max.
vacuum[mbar]850-
Air consumption
[l/min]48-
Part no.
10.01.12.0183610.01.12.01853
Max. suctioncapacity[m3/h]2.3-
Weight
[kg]0.70.7
Suction plate VC-M-SP 160x160Suction plate VC-M-SPV 160x160
Multi-Clamp with Integrated Vacuum Generation
• Complete system consisting of rotating and swiveling unit Multi-Base VC-M-B and Multi-Clampsuction plate VC-M-SP 160x160
Multi-Clamp VC-M
Multi-Clamp complete system VC-M Ordering data accessoriesType Max.
vacuum[mbar]
-850850850850
Air consumption
[l/min]-48484848
Part no.
10.01.12.0185410.01.12.0183610.01.12.0205210.01.12.0200310.01.12.02002
Max. suctioncapacity[m3/h]
-2.32.32.32.3
Weight[kg]
3.90.71.90.81.6
Multi-Base VC-M-BSuction plate VC-M-SP 160x160Suction plate VC-M-SP 300x100Suction plate VC-M-SP 200x55Suction plate VC-M-SP 210
Ordering data complete systemType Max.
vacuum[mbar]850
Air consumption
[l/min]48
Part no.
10.01.12.01845
Max. suctioncapacity[m3/h]2.3
Weight[kg]
4.6Complete system VC-M
Multi-Clamp for Operation with External Vacuum Generation
• Complete system consisting of rotating and swiveling unit Multi-Base VC-M-BV and Multi-Clampsuction plate VC-M-SPV 160x160• Multi-Base VC-M-BV with suction-capable base plate and manual slide valve for quick activationand deactivation of the vacuum• An additional vacuum pump is required to generate the vacuum
Multi-Clamp VC-M-V
Multi-Clamp complete system VC-M-V
Ordering data complete systemTypeComplete system VC-M-V
Part no.10.01.12.01852
Weight [kg]4.7
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 48
www.schmalz.com/multi-clamp 49
Accessories
Foot switch FU with detent
Ordering dataType Part no.
10.01.12.0205510.01.12.0303610.01.12.0356410.01.12.0356510.01.12.02054
10.01.12.0206110.01.12.0200010.01.12.02056
Foot switch FU 5 3/2 for external vacuum generation (incl. hoses)Foot switch FU 5 3/2 R with detent for external vacuum generation (incl. hoses)Foot switch FU 7 3/2 for integrated vacuum generation (incl. hoses)Foot switch FU 7 3/2 R with detent for integrated vacuum generation (incl. hoses)Accessory set for the operation of two Multi-Clamps VC-M-V with one vacuum pump(hose set with pneumatic quick-connect coupling, y-piece and straight piece)Accessory for the operation of two Multi-Clamps VC-M with one ejector (y-piece)Friction pad REIB-INSSealing cord DI-SCHN (available by the meter)
Application AreasWhether sawing, grinding, drilling or screwing – Multi-Clamp facilitates quick and flexible workpiece clampingand reclamping during countless work steps.
• Portable vacuum pump in a robust case with an integrated cable drum and power plug• Simple vacuum monitoring via gauge; nominal diameter of vacuum connection 5 mm• Protection category IP 54
Multi-Clamp Vacuum Pump VC-M-PU
Multi-Clamp vacuum pump VC-M-PU
Ordering data vacuum pumpType Max.
vacuum[mbar]850850
Voltage
60 Hz-
110
50 Hz230-
Part no.
10.01.12.0204010.01.12.02051
Max. suctioncapacity[m3/h]3.94.0
Weight[kg]
8.58.5
VC-M-PU-4-AC 230VVC-M-PU-4-AC 110V
Multi-Clamp VC-M-V
Systems and Accessories
Vacuum Clamping System Multi-Clamp
Sawing Grinding Drilling Srewing
Ordering data accessoriesType Part no.
10.01.12.0205010.01.12.0185310.01.12.0205310.01.12.0200910.01.12.02008
Weight [kg]4.10.71.90.81.6
Multi-Base VC-M-BVSuction plate VC-M-SPV 160x160Suction plate VC-M-SPV 300x100Suction plate VC-M-SPV 200x55Suction plate VC-M-SPV 210
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 49
50
Further Clamping Systems from Schmalz
Reduce Set-up Times, Increase FlexibilityThe Schmalz Matrix-Plate guarantees minimal set-uptimes when clamping flat workpieces with flat under -sides on CNC machining centers. Using the vacuum clamping system, even components that are difficult toclamp mechanically (e.g. aluminum workpieces) can besecured precisely, quickly and without distortion. Flexibility is increased again when combined with theInnospann Steel-Plate. Productivity and set-up times canbe further optimized, particularly when workpieces arechanged frequently.
Clamping Systems for Metal and Plastic Processing
The Highest Level of Security and PrecisionSchmalz clamping solutions ensure flexible and efficientproduction processes in glass working. Suction cups withspecial friction pads are wear resistant and guaranteeprecise results, even in challenging operating conditions.Schmalz developed the Quick-Change System SQC espe-cially for machine tables with screw-attachment suctioncups. The quick-change suction cups offer minimal set-up times and maximum flexibility.
Clamping Systems for Glass Working
Complex Geometries under ControlWorkpieces with uneven, rounded or curved contourspresent a new challenge for clamping technology. Withthe Schmalz Basic Holding Fixture, complex componentsfor CNC machining and measurement processes can beclamped without a problem. With the Suction CupBalance SSCB, Schmalz has developed both a clampingsystem with precise positioning for 3D free-form surfacesand a gripping system equipped for automatic setupand simultaneous gripping.
3D Clamping Systems
www.schmalz.com/clamping-systems
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 50
Worldwide On-Site with Own Subsidiaries and Trade Partners in More than 80 Countries
Contact
Our sales network of local field representatives, international subsidiaries and trade partners ensures quick andcompetent information and advice.
Worldwide
Canada
India
Headquarters in GermanyJ. Schmalz GmbHAacher Strasse 2972293 Glatten
Tel. +49 7443 2403-0Fax +49 7443 [email protected]
Tel +1 919 713 0880Fax +1 919 713 [email protected]
United States
Schmalz Inc.5850 Oak Forest DriveRaleigh, NC 27616
Tel. +1 905 569 9520Fax +1 905 569 [email protected]
Schmalz Vacuum Technology Ltd.17-3190 Ridgeway DriveON L5L 5S8 MississaugaOntario
Tel +91 20 4072 5500Fax +91 20 4072 [email protected]
Schmalz India Pvt. Ltd.EL – 38 ‘J’ Block MIDCBhosari411026 Pune
You can find the Schmalz sales partner in your country atwww.schmalz.com/salesnetwork
www.schmalz.com/handling-systems
Vacuum handling systems from Schmalz have been atried-and-tested feature of the woodworking industryfor a number of decades. Ergonomic and secure hand -ling of workpieces rationalizes the loading of CNCmachining centers and panel saws.
Individually-tailored handling solutions from a singlesource• Ergonomic vacuum lifters (tube lifter Jumbo or lifting device VacuMaster)• Lightweight aluminum cranes (crane systems or jib cranes)• Comprehensive services ranging from consultation and project planning up to assembly and commissioning
Loading CNC Machining Centers Ergonomically
Vacuum Handling Systems
Complete handling system with vacuum tube lifter Jumbo and crane
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:17 Seite 51
11
World of Vacuum Technology
J. Schmalz GmbHAacher Strasse 29D-72293 GlattenTel. +49 7443 2403-0 Fax +49 7443 2403-259 [email protected]
Vacuum Components
Tel. +49 7443 2403-102 Tel. +49 7443 2403-107 Tel. +49 7443 2403-108 Tel. +49 7443 2403-109
Vacuum Handling Systems Vacuum Clamping SystemsVacuum Gripping Systems
CanadaSchmalz VacuumTechnology Ltd.Mississauga
ChinaSchmalz (Shanghai) Co. Ltd.Shanghai
FinlandOy Schmalz AbVantaa
FranceSchmalz S.A.S.Champs-sur-Marne
GermanyJ. Schmalz GmbHGlatten
IndiaSchmalz India Pvt. Ltd.Pune
ItalySchmalz S.r.l. a Socio UnicoNovara
JapanSchmalz K.K.Yokohama
MexicoSchmalz S.de R.L. de C.V.Querétaro
The NetherlandsSchmalz B.V.Hengelo
PolandSchmalz Sp. z o.o.Suchy Las (Poznan)
RussiaSchmalz RepresentationMoscow
South KoreaSchmalz Co. Ltd.Goyang
Schmalz Worldwide
Find your local sales partner by visitingwww.schmalz.com/salesnetwork
SpainSchmalz S.A.Erandio (Vizcaya)
SwitzerlandSchmalz GmbHNürensdorf
TurkeySchmalz VakumSan. ve Tic. Ltd. Şti.Istanbul
United StatesSchmalz Inc.Raleigh (NC)
Scan code to access the digital brochure
© Schmalz, 02/16 I Article No. 29.01.03.01003 I Subject to technical changes without notice I Schmalz is a registered trademark
VC_Holz_Katalog_EN_22-02-2016_EN 24.02.16 09:15 Seite 1