Date post: | 02-Jul-2015 |
Category: |
Technology |
Upload: | cleanairengr01 |
View: | 201 times |
Download: | 0 times |
Test equipment for mercury
measurements using sorbent traps
USEPA Method 30B
&
Flue Gas Adsorption Method (FAMS)
New regulatory requirements such as MATS will increase
stack tester demand for sorbent trap sampling
Right now the focus is on just measuring
mercury with sorbent traps…
But new sorbent materials and test protocols are in the works for hydrogen chloride and ammonia
H
Cl
N
HH
H
Mercury measurement applications currently include the relative accuracy test audit (RATA) of mercury monitoring systems…
…verification of Low Emitting EGU (LEE) status…
…collection of engineering data for air pollution control evaluations…
…and demonstrating compliance with equipment
performance guarantees.
CleanAir offers a range of products to meet the tester’s needs in all of these applications
EPA 30B Manual Sampling Console
Rugged
Simple
Reliable
EPA 30B Manual Sampling Console
Side ASide B
Two independent gas paths for dual gas sampling and metering
EPA 30B Manual Sampling Console
Easy-to-read flow meters
EPA 30B Manual Sampling Console
Built-in trap and umbilical digital temperature controllers
EPA 30B Manual Sampling Console
Separate 6-channel digital pyrometer
EPA 30B Manual Sampling Console
Digital total volume displays
EPA 30B Manual Sampling Console
Fine and course manual control valves
EPA 30B Manual Sampling Console
Total system vacuum pressure gauges
EPA 30B Manual Sampling Console
Type K thermocouple inputs
EPA 30B Manual Sampling Console
3-Pin electrical feeds for trap and umbilical heaters
EPA 30B Manual Sampling Console
Quick-connect stainless steel sample inlets
EPA 30B Manual Sampling Console
Two auxiliary electrical outlets
EPA 30B Manual Sampling Console
O2 sensors
EPA 30B Manual Sampling Console
Toggle Switches
EPA 30B Manual Sampling ConsoleWelded aluminum case
EPA 30B Manual Sampling Console
Three carrying handles
EPA 30B Manual Sampling Console
SPECIFICATIONS
Sample Pump: KNF Diaphragm, 120 Vac. 115V/60Hz, 9.5 lpm
Dry Gas Meter Timer: Digital LCD with Battery Backup
(Displays h, m, s) Umbilical Power Output Connection:
Amphenol 3-pin Fused Auxiliary Power Output Connection: 3 pin
120 V Receptacle Sample Inlet Connection: 1/4" Stainless
Steel Quick Connect with Stainless Steel Valves
Temperature Controllers: Solid State for Probe, Heated Sample Line, and 6 Channel Selector
Thermocouple Connections: K-Type Panel Mount
Cabinets: Welded Aluminum Access Doors: Quick-Release External Dimensions (h x w x d):
17.5" x 12" x 18.5 " Weight: 47 lb (21 kg)
Rugged
Simple
Reliable
EPA 30B Sampling Probes
EPA 30B Sampling Probes
Modular design provides flexibilityin length and heating options
EPA 30B Sampling Probes
Separate heated trap head
EPA 30B Sampling Probes
Quad and Dual configurations available
Quick-Change Trap Holders
Traps exchanged in seconds
without need for tools
Trap Head
accepts a
variety of trap
sizes and
includes our
patented
quick-change
system
EPA 30B Sampling Probes
Separate heated trap head
Custom-length sheath
EPA 30B Sampling Probes
Sample Line (Umbilical)(Heated and unheated options available)
Custom-length sheath
Separate heated trap head
EPA 30B Sampling ProbesBesides the probe and sampling console, a gas conditioning system is needed to dry the gas prior to metering.
CleanAir offers several options…
EPA 30B Sampling Probes
…from the simplicity of glass jar condensers…
EPA 30B Sampling Probes
…to a dry sorbent/coalescing filter combination…
EPA 30B Sampling Probes
…to a fully outfitted electronic gas conditioning system.
For a more hands-off approach, we offer the automated MET-80P™ sampler.
Portable, modular system based on the proven reliability of the MET-80™ platform used for permanent monitoring since 2007.
MET-80P
MET-80P
MET-80
Programmable and configurable.
Operate locally or remotely.
EPA Method 30B
RATA testing
LEE testing
Temporary Performance Specification 12B monitoring.
The MET-80P isideally suited for:
MET-80P Features
Fully automated gas sampler with mass flow controllers and high-capacity diaphragm pumps
FRONT VIEW
Fully automated gas sampler with mass flow controllers and high-capacity diaphragm pumps
FRONT VIEW
Gas sampler can be used as a stand-alone unit using just about any gas conditioning system…or
Combine with our OPTIONAL MET-80P gas conditioning system with refrigerated moisture condenser
FRONT VIEW
NEMA 4 containers allow hardware to be placed in all types of weather conditions
SIDE VIEW
SIDE VIEW
All interconnects accessed from outside using weather-proof fittings and plugs
Optional AC keeps electronics safe regardless of ambient temperatures
SIDE VIEW
Industrial PLC for control and data acquisition
REAR VIEW
Acid gas scrubbers to protect autosamplerand ensure dry gas sample
REAR VIEW
MET-80P Portable
Sorbent Trap Sampler
SPECIFICATIONS
Sample Pumps: KNF Diaphragm, 24 VDC, 12 lpm
Dual mass flow meters, 0-2 l/min NI CompactRIO Programmable Automation
Controller CleanAir METRICTM software Heated Sample Line Power Output
Connection: 3 pin 120V Receptacle Sample Probe Power Output Connection: 3
pin 120 V Receptacle Sample Inlet Connections: 1/4" Stainless
Steel Push-on Temperature Controllers: Solid State relays
for probe and heated sample line Thermocouple Connections: K-Type
weather-tight Cabinets: Water/air-tight, high-impact
copolymer resin AC (A): 460 Btu/hr, 14 lb
AC (B): 1,300 Btu/hr 21 lb External Dimensions (h x w x d):
(A) 14.5" x 24" x 36 “ (B) 22” x 24” x 36” Weight: 2 x 100 lb (2 x 45 kg) w/o AC units
For more information on CleanAir’s sorbent trap testing
and monitoring products, contact CleanAir today.800-991-3300
Thanks!