CLEANABLE HEAT EXCHANGERIndoor Compact and Cleanable
Product Features• Koolant Koolers exclusive design
allows cleaning without removing refrigerant or fluid piping
• Prevents costly, non-cleanable heat exchanger maintenance
• Allows direct cooling of cutting fluids
• Available with the A Series for oil fluids only (115 SSU, 225 SSU or custom)
1 Refrigerant enters the exchanger tubes from the side as a cold liquid
2 Cold refrigerant makes four horizontal passes, absorbing heat from the process fluid
3 Heat absorption causes the liquid refrigerant to change states before it exits as a gas
4 Warm process fluid enters and is forced across the baffles, transferring heat from the fluid
5 Cool process fluid is sent out to cool your process
Glen Dimplex Thermal Solutions 2625 Emerald Drive, Kalamazoo, MI 49001
(800) 968-5665 dimplexthermal.com | [email protected]
LKKCHX2016
REV. 103117
1
3
45
2LIQUID
REFRIGERANT IN LIQUID REFRIGERANT
FLOW
GASEOUS REFRIGERANT
OUT
COLD PROCESS
FLUID
HOT PROCESS
FLUID
When Contaminants Create a Challenge, Consider a Cleanable Heat Exchanger.Industrial environments can be tough on your process fluids. Contaminants in machining processes will clog the narrow confines of ordinary heat exchangers.
Our cleanable heat exchanger with removable sides allows for thorough cleaning to ensure it remains contaminant free and efficient. Unlike most other exchangers, there is no need to disconnect process piping. Cleanable and efficient – the best of both worlds.