Industrial Water Treatment and Recycling Specialists

pH Control Systems

www.cleanawater.com.au1800 353 788

Cleanawater automated pH Control Systems, also referred to as pH Dosing and and pH Correction, are engineered to measure, control and regulate pH levels. Supplied as pre plumbed solutions complete in an IP65 enclosure systems are easy to integrate into your existing infrastructure.

pH Control Systems

For more information call us on 1800 353 788 or visit www.cleanawater.com.au

Automated Inline and recirculating systems – Ideal for retrofits or new installationsCleanawater’s range of pH control systems are adaptable to suit existing site retrofitting or for new installations. Inline systems complete with dosing panels, controller’s inline filters, pumps and submersible probes are available as complete turnkey packages. Agitators and recirculating pump add ons are available for larger scale flow and storage applications. Chlorine control systems also available for disinfection applications.

Cleanawater Recirculating pH Control System

Features of Cleanawater packaged pH control systems:

Single or dual pump systems for one way or two way dosing

Digital controllers for automated operation

Systems available to suit all flow rates

Adaptable to suit all industrial and commercial applications

Able to be retrofit into your existing process

Remote alarm notifications and SMS notifications

Systems available to measure the following parameters:

pH; RX (ORP)

Free and total chlorine residual

Hydraulic peroxidel peracetic acid

Chlorine dioxide

Temperature

Multi-paramater photometric analyzer

For more information call us on 1800 353 788 or visit www.cleanawater.com.au

pH Control Systems

Cleanawater Inline pH Control System

Benefits of Cleanawater packaged pH control systems:

Protecting you from unauthorized discharge

Ensuring you adhere to all regulations

Pre plumbed, factory pre commissioned, save on install costs

Automated, hassle free dosing solutions

Common Applications Include:Trade Waste Applications

Potable Water Applications

Industrial Water Applications

Manufacturing Process Water Applications

pH Control Systems

Recirculating pH Control SystemWater is consistently recirculated through a probe assembly providing a sample of stored water which may require pH correction. Water is filtered by an inline filter to ensure the sample point or probe is not contaminated. The probe sends a reading back to the digital controller and dosing pump 1 or dosing pump 2 may inject chemical through the re circulating line back to the water storage source if reading is out of pre programmed set points.

Inline pH Control SystemA submersible probe and probe holder is placed within the water storage source and connected to a digital pH controller. This probe provides live pH data within the storage source and the controller will activate the pH pump dosing pump to start pumping if the pH levels are out of pre programmed set points.

A cost effective solution to pH control.