CLEANPAK CLEAN-TRAK BOTTOM-LOAD FLUSH · PDF fileA true flush concealed sprinkler head can be...

© Nortek Air Solutions, LLC CLEANPAK | 19855 SW 124th Ave, Tualatin, OR 97062 | 503.639.0113 | www.huntair.comProducts may be protected under one or more of the patents listed under www.nortekair.com/patents

CLEAN-TRAK BOTTOM-LOAD

FLUSH CEILING SYSTEM

CLEANPAK offers an extension to the patented Clean-Trak® flush ceiling system with its Bottom-Load

Flush ceiling. This extrusion is suited for applications where the space above the ceiling grid is limited

and where the application calls for the filters to contain gel rather than the ceiling grid. It enables you to

load filters, fan filter units, or blank pans straight up without tipping or rotating them through the grid

opening. The extrusion features a downward facing knife-edge to which the gel in the filter or

blank pan will seal. Also available in formed stainless steel.

KEY FEATURES

· Integral knife-edge extrusion. Optional formed stainless steel.

· Welded module grid with welded knife-edges miters. Optional stick-built grid with field caulked miters.

· Integral lighting--T8, T5, or LED.

· Continuous slot extrusion for the retaining clips allows for superior load capacity.

· ¼ turn filter retaining clips that do not generate particles (we do not use a screw receiver extrusion

since it generates particles).

· Closure strip for the slot to eliminate particle cavities.

· A true flush concealed sprinkler head can be used in the grid extrusion.

· Filters that are pre-gelled at the filter manufacturer’s facility.

· Option to be walkable on the filters, FFUs, or blank pans.

· Optional Equalizer can be used to balance the system with a center adjustment port in the filter.

· Optional plenum can.

· Of course, this system includes all the features and options of the patented Clean-Trak ceiling system such

as the flush ceiling, integrated lighting, built-in fire protection, Clean-Screens® , welded modular grids or

stickbuilt grids, modular plenums, special finishes for chemical resistance, and GelLink™ seal at module joints.

CONDENSED SPECIFICATION optional items noted in [ ]

The grid [plenum] system shall be Clean-Trak Bottom-Load Flush as manufactured by CLEANPAK International. The grid will have

a downward facing knife-edge that will accept pre-gelled filters. [Welded modules shall have welded knife-edge miters.] Filters,

blank pans, and FFUs shall be capable of being loaded from the bottom without tipping or rotating of the filters into the grid opening.

The grid extrusion shall have integrated flush lighting within the grid channel that is capable of 100% filter coverage of the entire

ceiling. The extrusion shall have a continuous slot to seat a nut to which the filter retaining clip shall attach. A screw receiver slot

extrusion shall not be used. The grid extrusion shall be capable of accepting a true flush sprinkler head within the width of the

extrusion. [The grid shall have a GelLink seal that flows gel between module joints.] [The grid shall have Clean-Screens at the grid

face that have perimeter slots to jet air underneath the grid member and wash out the area of particles.]

CLEANPAKa Nortek Air Solutions Brand


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 2 OF 46

B

TITLE:

2.6 BOTTOM LOAD

MASTER TOP ISO

ZC

2.6BottomLoad.idw

FILE NAME:

Bottom Load

SCALE 3/32

A AB B

CC

D D

E EF FG GH H

J JK KL L

M M

N N

P P

R R

T T

UU

VV

W W

YY

Z Z

AA AA

AB AB

AC AC

AD AD

AE AE

AF AF

AG AG

AH AH

AJ AJ AK AK

AL

AL

AM

AM

AN AN

AP AP

AR AR

AT AT

AU AU

AV AV

AW AW

BB

BB

BD BD

BF BF

BG BG

BHBH

BJ BJ


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 3 OF 46

E

TITLE:

2.6 BOTTOM LOAD

MASTER PLAN VIEW

Jon H

10/23/12

3/32

2.6BottomLoad.idw

FILE NAME:

PAINTWELDUOBQTYDESCRIPTION ITEMLEVEL

EXTR 2.6 BOT INT TB240-10-2011|

EXTR 2.6 BOT INT240-10-2042|

EXTR 2.6 BOT EXT240-10-2023|

EXTR 2.6 BOT EXT PLEN RVT240-10-2004|


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 4 OF 46

A

TITLE:

2.6 BOTTOM LOAD GRID

EXTRUSION PROFILES

Jon H

07/01/13

3/8

2.6BottomLoad.idw

FILE NAME:

4.540

2.600

2.625

4.540

2.625

2.600

2.625

1.300

8.000

2.625

8.460

1.300

5.050

7.610

2

1

3 4

SECTION A-A

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 5 OF 46

A

TITLE:


SPRINKLER CONCEALED HARD PIPED

TYPE "B" COUPLING

Jon H

10/23/12

1/2

2.6BottomLoad.idw

FILE NAME:

1" SCH 40 PIPE

(BY OTHERS)

TYPE "B" COUPLING

THREADED 1" FEMALE

EIGHT LUG

LOCKING NUT

MIRAGE CONCEALED

SPRINKLER

SECTION B-B

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 6 OF 46

A

TITLE:


SPRINKLER PENDANT HARD PIPED

TYPE "M" THREADED COUPLING

Jon H

10/23/12

1/2

2.6BottomLoad.idw

FILE NAME:

1" SCH 40 PIPE

(BY OTHERS)

EIGHT LUG

LOCKING NUT

SPRINKLER HEAD

(INSTALLED BY OTHERS)

TYPE "M" COUPLING

THREADED 1" FEMALE

SECTION C-C

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 7 OF 46

A

TITLE:


SPRINKLER FLEXIBLE HOSE

Jon H

10/23/12

1/2

2.6BottomLoad.idw

FILE NAME:

SPRINKLER HOSE

SPRINKLER HEAD

(INSTALLED BY OTHERS)

SPRINKLER PORT

SECTION D-D

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 8 OF 46

A

TITLE:


PORT

Jon H

10/23/12

1/2

2.6BottomLoad.idw

FILE NAME:

PORT

SECTION E-E

SCALE 5/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 9 OF 46

A

TITLE:


FILTER BOTTOM LOAD PLENUM STYLE

Jon H

10/23/12

5/16

2.6BottomLoad.idw

FILE NAME:

NOMINAL GRID CENTERLINES - 3.875"

SECTION F-F

SCALE 5/16 CLEANPAKa Nortek Air Solutions Brand

19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 10 OF 46

A

TITLE:


FILTER BOTTOM LOAD PLENUM STYLE

WITH TOP FLANGE

Jon H

10/23/12

5/16

2.6BottomLoad.idw

FILE NAME:

FILTER SIZED AT NOMINAL GRID CENTERLINES - 3.875"

SIZE COMPONENTS AT GRID NOMINAL CENTERLINES - 5.625"

TO FIT INTO THIS TOP FILTER LEDGE

5.341

DISTANCE INSIDE FILTER LEG IS GRID NOM CENTERLINES - 5.441"

SECTION G-G

SCALE 5/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 11 OF 46

A

TITLE:


FILTER BOTTOM LOAD TERMINAL

DUCTED FILTER STYLE

Jon H

10/23/12

5/16

2.6BottomLoad.idw

FILE NAME:


7.724

9.724

SECTION H-H

SCALE 5/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 12 OF 46

A

TITLE:


BOTTOM LOAD BLANK PAN GEL

Jon H

10/23/12

5/16

2.6BottomLoad.idw

FILE NAME:


.750

SECTION J-J

SCALE 5/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 13 OF 46

A

TITLE:


EQUALIZER ON

BOTTOM LOAD PLENUM FILTER

Jon H

10/23/12

5/16

2.6BottomLoad.idw

FILE NAME:

EQUALIZER SIZED AT



SECTION Y-Y

SCALE 5/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 14 OF 46

A

TITLE:


EQUALIZER REMOVEABLE ON

BOTTOM LOAD PLENUM STYLE

FILTER WITH TOP FLANGE

Jon H

04/12/13

5/16

2.6BottomLoad.idw

FILE NAME:

EQUALIZER SIZED AT



SECTION K-K

SCALE 5/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 15 OF 46

A

TITLE:


EQUALIZER IN GRID

NON-FILTERED APPLICATION

Jon H

10/23/12

5/16

2.6BottomLoad.idw

FILE NAME:


3.290

SECTION L-L

SCALE 5/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 16 OF 46

A

TITLE:


EQUALIZER ON GRID

Jon H

10/23/12

5/16

2.6BottomLoad.idw

FILE NAME:


7.657

8.620

SECTION BH-BH

SCALE 5/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 17 OF 46

A

TITLE:


CLEAN SCREEN 40%

Jon H

06/04/14

5/16

2.6BottomLoad.idw

FILE NAME:


40% OPEN STAGGERED

PERF PATTERN

SECTION Z-Z

SCALE 1/4


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 18 OF 46

A

TITLE:


FFU-AC1-EB ON BOTTOM LOAD

PLENUM STYLE FILTER

WITH TOP FLANGE

ZC

04/12/13

1/4

2.6BottomLoad.idw

FILE NAME:

FFU SIZED AT


15.591

14.591

5.341

10.250


CORNER PLATE

TYP. (4) LOCATIONS

SECTION AW-AW

SCALE 5/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 19 OF 46

A

TITLE:


FFU-DC-EB ON BOTTOM LOAD

PLENUM STYLE FILTER

WITH TOP FLANGE

JLH

02/12/14

5/16

2.6BottomLoad.idw

FILE NAME:


15.404

16.347

10.063

.943

FFU SIZED AT


5.341

CORNER PLATE

TYP. (4) LOCATIONS

INCOMING POWER LOCATION.

6" WIRE LEADS.

ELECTRICAL CONNECTION AND FLEX BY OTHERS.

LOCAL SPEED POT ADJUSTMENT

(IF APPLICABLE)

COMMUNICATION HOOKUP

(IF APPLICABLE)

SECTION BG-BG

SCALE 1/2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 20 OF 46

A

TITLE:

2.6 BOTTOM LOAD

FLUSH LIGHT LED

Jon H

04/23/14

1/2

2.6BottomLoad.idw

FILE NAME:

SECTION M-M

SCALE 2/3


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 21 OF 46

A

TITLE:


FLUSH LIGHT T5

Jon H

10/24/12

1/2

2.6BottomLoad.idw

FILE NAME:

SECTION N-N

SCALE 2/3


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 22 OF 46

A

TITLE:


FLUSH LIGHT T8

Jon H

10/24/12

1/2

2.6BottomLoad.idw

FILE NAME:

SECTION T-T

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 23 OF 46

A

TITLE:


GEL-LINK MODULE TO MODULE JOINT

MODULE SEAM LIGHTING (IF APPLICABLE)

Jon H

10/26/12

1/2

2.6BottomLoad.idw

FILE NAME:

5.05

TYP.

TACK WELD

.080 ALUMINUM

3/4 x 5/8 ANGLE

TO CREATE

TROUGH

5/16-18 WHIZ NUT

BOLT HOLES ARE TYPICALLY

SPACED 6.0" FROM EACH END

OF PLENUM AND 24.0" O.C.

EXTERIOR GRID PROFILE

5/16" WASHER

5/16-18 x 3/4" BOLT

EXTERIOR PUNCHED

FOR GEL SHARE

2.600

FIELD CAULKING

FIELD INSTALLED

LIGHT FIXTURE (IF APPLICABLE)

SECTION AG-AG

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 24 OF 46

A

TITLE:


MODULE TO MODULE JOINT

Jon H

05/19/13

1/2

2.6BottomLoad.idw

FILE NAME:

FIELD INSTALLED

LIGHT FIXTURE

FIELD CAULKING

5/16-18 WHIZ NUT

BOLT HOLES IN MODULES

ARE TYPICALLY



EXTERIOR GRID PROFILE

5/16" WASHER

5/16-18 x 3/4" BOLT

SECTION P-P

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 25 OF 46

A

TITLE:


PERIMETER GRID

Jon H

10/24/12

1/2

2.6BottomLoad.idw

FILE NAME:

5/16-18 WHIZ NUT


ARE TYPICALLY


OF PLENUM AND 24" O.C.

PERIMETER GRID PROFILE

5/16" WASHER

5/16-18 x 0.75" BOLT

5.050 TYP.

FACE PLATE W/ GRID CLIP

FIELD CAULKING

NOTES:

FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER MITERS ARE

TO BE DONE IN THE FIELD. SOME BOLT HOLES IN PERIMETER GRID

PIECES WILL NEED TO BE CUSTOM DRILLED IN THE FIELD.

SECTION V-V

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 26 OF 46

A

TITLE:


PERIMETER GRID

WITH CLOSURE PLATE TO WALL

Jon H

10/29/12

1/2

2.6BottomLoad.idw

FILE NAME:

PERIMETER GRID

PROFILE

5/16" WASHER

5/16-18 x .75"

BOLT

BOLT HOLES IN MODULES ARE

TYPICALLY SPACED

6.0" FROM EACH END

OF PLENUM AND

24.0" O.C.

5/16-18 WHIZ NUT


FIELD GASKET OR

CAULKING BY OTHERS

CLOSURE PLATE TRIMED

TO WIDTH IN FIELD

FIELD CAULKING

NOTES:


TO BE DONE IN THE FIELD. BOLT HOLES IN PERIMETER GRID PIECES

WILL NEED TO BE CUSTOM DRILLED IN THE FIELD.

SECTION R-R

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 27 OF 46

A

TITLE:


PERIMETER GRID

WITH CLOSURE PLATE AND

GEL SEALED FUNCTIONAL WALL CLOSURE

Jon H

10/25/12

1/2

2.6BottomLoad.idw

FILE NAME:

PERIMETER GRID PROFILE

5/16" WASHER

5/16-18 x .75" BOLT

BOLT HOLES IN

MODULES ARE

TYPICALLY SPACED

6.0" FROM EACH

END OF PLENUM

AND 24.0" O.C.

5/16-18 WHIZ NUT

.080 ALUMINUM

3/4 x 5/8 ANGLE

TO CREATE

TROUGH

TACK WELD

CLOSURE PLATE TRIMMED

TO WIDTH IN FIELD

FACE PLATE WITH

GRID CLIP

FIELD CAULKING

FIELD CAULK

BY OTHERS

ATTACHMENT TO

WALL BY OTHERS

EXTERIOR PUNCHED

FOR GEL SHARE

FIELD GASKET OR

CAULKING BY OTHERS

NOTES:

FIELD CUTTING OF PERIMETER GRID INCLUDING CORNER

MITERS ARE TO BE DONE IN THE FIELD. SOME BOLT HOLES

IN PERIMETER GRID PIECES WILL NEED TO BE CUSTOM

DRILLED IN THE FIELD.

SECTION U-U

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 28 OF 46

A

TITLE:


PERIMETER GRID WITH ANGLE LEDGE

Jon H

10/29/12

1/2

2.6BottomLoad.idw

FILE NAME:

5/16-18 WHIZ NUT


ARE TYPICALLY



PERIMETER GRID

PROFILE

5/16" WASHER

5/16-18 x 3/4" BOLT

1"x1" ANGLE WELDED

TO SHIP LOOSE

PERIMETER GRID

FIELD CAULKING

NOTES:





SECTION W-W

SCALE 1 / 2


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 29 OF 46

A

TITLE:


PERIMETER GRID INTERFACE

TO WALL COVED

Jon H

10/30/12

1/2

2.6BottomLoad.idw

FILE NAME:

SHEET METAL

Z PIECE

BY OTHERS

WALL AND COVING

BY OTHERS

FIELD CAULKING

NOTES:


MITERS ARE TO BE DONE IN THE FIELD. BOLT HOLES IN

PERIMETER GRID PIECES WILL NEED TO BE CUSTOM



19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 30 OF 46

A

TITLE:


BOTTOM LOAD CLIP RETAINER

LAYOUT PLAN VIEW

Jon H

10/29/12

1/8

2.6BottomLoad.idw

FILE NAME:

Y

X

NOTES:

1. INSTALL CLIP RETAINER ASSEMBLIES 8.30" IN FROM

CENTERLINE OF GRID STICK ON THE LONG SIDES OF

GRID OPENINGS.

2. X AND Y ARE NOMINAL CENTERLINE DIMENSIONS OF GRID.

3. FOR FFUs OR WALKABLE PANS, ADD 4 CORNER PLATES

PER OPENING.

SECTION AA-AA

SCALE 1/4


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 31 OF 46

A

TITLE:

2.6 BOTTOM LOAD PLENUM

PERIMETER GRID

Jon H

04/15/13

1/2

2.6BottomLoad.idw

FILE NAME:

5/16-18 WHIZ NUT

PERIMETER GRID

PROFILE

5/16" WASHER

5/16-18 x 0.75"

BOLT

FACE PLATE W/

GRID CLIP

5.050

FIELD CAULKING

NOTES:


TO BE DONE IN THE FIELD. BOLT HOLES IN PERIMETER GRID PIECES

WILL NEED TO BE CUSTOM DRILLED IN THE FIELD.

SECTION AB-AB

SCALE 1 / 4


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 32 OF 46

A

TITLE:


PERIMETER GRID WITH ANGLE LEDGE

Jon H

04/15/13

1/2

2.6BottomLoad.idw

FILE NAME:

1"x1" ANGLE WELDED

TO SHIP LOOSE

PERIMETER GRID

PERIMETER GRID

PROFILE

5/16" WASHER

5/16-18 x 3/4" BOLT

BOLT HOLES IN MODULES ARE

TYPICALLY SPACED

6.0" FROM EACH END

OF PLENUM AND

24.0" O.C.

5/16-18 WHIZ NUT

FIELD CAULKING


NOTES:





SECTION AC-AC

SCALE 1/4


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 33 OF 46

A

TITLE:


PERIMETER GRID WITH

CLOSURE PLATE TO WALL

Jon H

04/16/13

1/4

2.6BottomLoad.idw

FILE NAME:

BOLT HOLES IN

MODULES ARE

TYPICALLY SPACED

6.0" FROM EACH END

OF PLENUM AND

24.0" O.C.

5/16-18 WHIZ NUT

5/16-18 x .75"

BOLT

PERIMETER GRID

PROFILE

5/16" WASHER

FIELD GASKET OR

CAULKING BY OTHERS


TO WIDTH IN FIELD

FACE PLATE W/

GRID CLIP

FIELD CAULKING

NOTES:





SECTION AD-AD

SCALE 1 / 4


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 34 OF 46

A

TITLE:


PERIMETER GRID WITH

CLOSURE PLATE TO WALL AND GEL

SEALED FUNCTIONAL WALL CLOSURE

Jon H

04/16/13

1/4

2.6BottomLoad.idw

FILE NAME:

FIELD GASKET OR

CAULKING BY OTHERS

FIELD CAULKING

FACE PLATE WITH

GRID CLIP

TACK WELD

.080 ALUMINUM

3/4 x 5/8 ANGLE

TO CREATE

TROUGH

5/16-18 WHIZ NUT

5/16" WASHER

5/16-18 x .75" BOLT

ATTACHMENT TO

WALL BY OTHERS


TO WIDTH IN FIELD

FIELD CAULK

BY OTHERS

NOTES:





SECTION AE-AE

SCALE 1 / 4


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 35 OF 46

A

TITLE:


PERIMETER GRID INTERFACE

TO WALL COVED

Jon H

04/29/13

1/4

2.6BottomLoad.idw

FILE NAME:

SHEET METAL

Z PIECE

BY OTHERS

5/16-18 x .75"

BOLT

5/16" WASHER

PERIMETER GRID

PROFILE

5/16-18 WHIZ NUT

FIELD CAULKING

WALL AND COVING

BY OTHERS

NOTES:





SECTION AF-AF

SCALE 1 / 4


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 36 OF 46

A

TITLE:


MODULE TO MODULE JOINT


Jon H

05/03/13

1/4

2.6BottomLoad.idw

FILE NAME:

FIELD CAULKING

FIELD INSTALLED

LIGHT FIXTURE

5/16-18 WHIZ NUT

5/16" WASHER

5/16-18 x .75"

BOLT

SECTION AH-AH

SCALE 1 / 4


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 37 OF 46

A

TITLE:


GEL-LINK MODULE TO MODULE JOINT


2.6BottomLoad.idw

FILE NAME:

5/16" WASHER

5/16-18 x .75"

BOLT

EXTERIOR GRID

PROFILE

5/16-18 WHIZ NUT

FIELD CAULKING

FIELD INSTALLED

LIGHT FIXTURE

IF APPLICABLE

GEL POURED IN FIELD

.080 ALUMINUM

3/4 x 5/8 ANGLE WELDED

FROM FACTORY

TO CREATE TROUGH

AT PERIMETER GRID SECTION AJ-AJ

SCALE 3/8

AT INTERIOR GRID SECTION AK-AK

SCALE 3/8


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 38 OF 46

A

TITLE:


WITH WALL INTERFACE

Jon H

05/16/13

3/8

2.6BottomLoad.idw

FILE NAME:

FIELD CAULKING

WALL TO HEAD

TRACK BY OTHERS

WALL TO HEAD

TRACK BY OTHERS

HEAD TRACK BY OTHERS

HEAD TRACK BY OTHERS

SECTION AL-AL

SCALE 3/16


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 39 OF 46

A

TITLE:


BOLTING DETAIL

WELDED PLENUM TO WELDED PLENUM

Jon H

05/16/13

3/16

2.6BottomLoad.idw

FILE NAME:

ATR BOLTED TO HOLE IN TOP OF PLENUM

(HANGING ATR AND HARDWARE BY OTHERS)

1. BOLT TOGETHER LOOSELY WHEN SUSPENDING MODULES

5. TIGHTEN SUSPENSION HARDWARE

4. BOLTS ALONG TOP OF PLENUM

3. BOLTS AT PLENUM

CORNERS

2. BOLTS AT PLENUM GRID

5/8"x1-1/4 A325

BOLT, TYP.

5/8" F436 FLAT

WASHER, TYP.

5/8" F436 FLAT

WASHER, TYP.

5/8" A194 GR2H

NUT, TYP.

5/16x3/4 GR5 BOLT

5/16" FLAT WASHER

5/16" WHIZNUT

NOTE:

NUMBERS INDICATE SEQUENCE ORDER

FOR MODULE INSTALLATION ASSEMBLY.

1

.

5

0

T

Y

P

.

1

.

5

0T

Y

P

.

SECTION AM-AM

SCALE 3/32


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 40 OF 46

A

TITLE:


TYPICAL PLENUM SPRINKLER PIPING

Jon H

05/20/13

3/32

2.6BottomLoad.idw

FILE NAME:

SPRINKLER HEAD INSTALLED IN FIELD BY OTHERS

WELDED SPRINKLER COUPLER

ROOF PANEL

SECTION AT-AT

TYPE 3B HANGER GRID TO GRID

LOAD CAPACITY: 3.75 Kips

SECTION AU-AU

TYPE 2B HANGER MIDSPAN


SECTION AV-AV

TYPE 4X HANGER CORNER



19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 41 OF 46

B

TITLE:

TYPICAL HANGERS 1/2" ATR

Jon H

07/12/13

1/4

2.6BottomLoad.idw

FILE NAME:

SECTION AN-AN

TYPE 3C HANGER GRID TO GRID


SECTION AP-AP

TYPE 3C HANGER MIDSPAN


SECTION AR-AR

TYPE 4Z HANGER CORNER



19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 42 OF 46

B

TITLE:

TYPICAL HANGERS 5/8" ATR

Jon H

07/12/13

2.6BottomLoad.idw

FILE NAME:

DETAIL BA

SECTION BB-BB

SCALE 3/32

BA


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 43 OF 46

A

TITLE:


TUBE HANDRAIL CONNECTION

Jon H

04/22/14

2.6BottomLoad.idw

FILE NAME:

9.000

2.000

HANDRAIL

DETAIL BC

SCALE 3/32

SECTION BD-BD

SCALE 3/32

BC


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 44 OF 46

A

TITLE:


STRUT HANDRAIL CONNECTION

Jon H

04/22/14

3/32

2.6BottomLoad.idw

FILE NAME:

9.000

HANDRAIL

DETAIL BE

SCALE 1/16

SECTION BF-BF

SCALE 1/4

BE


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 45 OF 46

A

TITLE:


GRATING LEDGE ANGLE

Jon H

04/22/14

N/A

2.6BottomLoad.idw

FILE NAME:

CLIENT TO SPECIFY

DISTANCE FROM TOP

OF LEDGE ANGLE TO

TOP OF PLENUM

GRATING

BY OTHERS

SUPPORT BY OTHERS

HARDWARE AND

HOLES BY OTHERS

SECTION BJ-BJ

SCALE 1 / 4


19855 SW 124th AVE.

TUALATIN, OR 97062

Phone (503) 639-0113

www.huntair.com

SIZE:DRAWING NO.:

JOB NO:

DRAWN BY:

ISSUED ON:

CHECKED BY:

SCALE:

THIS DRAWING IS THE

PROPERTY OF

HUNTAIR CLEANPAK

AND CAN NOT BE

REPRODUCED IN

WHOLE OR IN PART,

NOR DELIVERED TO

OTHERS

WITHOUT THE

EXPRESS WRITTEN

PERMISSION OF

HUNTAIR CLEANPAK.

SHEET 46 OF 46

A

TITLE:


PLENPAK

Jon H

06/17/14

1/4

2.6BottomLoad.idw

FILE NAME:

5.511

4.906

Date post:	21-Mar-2018
Category:	Documents
Upload:	trinhthuan
View:	219 times
Download:	6 times

CLEANPAK CLEAN-TRAK BOTTOM-LOAD FLUSH · PDF fileA true flush concealed sprinkler head can be...

Documents