+ All Categories
Home > Documents > Clear chromate

Clear chromate

Date post: 03-Jan-2017
Category:
Upload: truongtu
View: 219 times
Download: 0 times
Share this document with a friend
1
ing inspectors, painting contrac- tors, and automotive refinishers. Circle 412 on reader service card CLEAR CHROMATE Metalline Corp. www.jsamc2.com Metalline Sapphire 325 provides 300 hours in rack plating over chloride zinc and over 100 hours in barrel. Single-component, and easy to use, Sapphire 325 is ideal for high corrosion protection in difficult environments where yel- low chromate is unattractive. Circle 413 on reader service card cost polyimide film combined with a no-residue, fully cross-linked sili- cone adhesive. K-201, with its 1- mil fihn substrate, and K-202, with its 2-mil backing, provide flexible, durable resistance to chemicals, abrasion, contamination, and high temperature to produce the desired results. Its silicone adhesive oper- ates effectively between -100 to +500°F, suitable for almost every process environment. Circle 411 on reader service card COATING THICKNESS GAUGE Paul N. Gardner Co. Inc. www.gardco.com The PosiTest DFT Coating Thickness Gauge is available in two models. The PosiTest DFT Hea t~d TankEvaporator System TM shown with optional ET~Companlon TM Condenser for closedloop water recovery Call Now for More Information 12161391-POLY Heated Tank Evaporator System M The Poly Products Evaporator System evaporates water from processsolutions and waste waters under atmospheric conditions The highest evaporation rate can be achieved by heating the sotution prior to pumping it into the evaporator. This is accomplished by using our heated tank with either a ga~ fired burner, steam coiI or elecIdc heater The patented (#4790904) ET Evaporative Tank TM is molded out of polyethylene, with no weed seams, for leak-free operation With over 2,000 products ~n the field, the Poty Products evaporator has proven to be the leader in atmospheric evaporation of water. SYSTEM INCLUDES: • ET Evaporative Tank ~" Control panel with temperature control, , Stainles~ or carbon steel heated over temperature protection and level tank and fire tube controls , Gas fired burner, steam coil, or CPVC or stainless steel centrifugal pump electric heater • Optional filter press is available for ~,~ co~inuous solids removal Circle 037 on reader information card or go to www.thra.to/webconnect Ferrous measures nonmagnetic coatings on steel. The PosiTest DFT Combo measures both non- magnetic coatings on steel and nonconductive coatings on alu- minum, brass, etc. It automati- cally recognizes the substrate and takes a measurement. The gauges are suitable for powder coaters, paint applicators, coat- CLARIFIERS • 5-1000 GPM flow • Parallel plate design for efficient solids settling with removable plate racks • Ftoculation tank with mixer is standard • Optional catwalk and ladder available • Heavy duty epoxy coated steel construction • Meets EPA discharge limits for industrial waste water SLUDGE DRYERS • 1 75 cu ft capacity Uses low cost gas, steam, hot water or electrical heat source to reduce sludge up to 75% Stainless steel internal parts • Space saving design allows unit to fit under the filter press or elsewhere in the plant • Meets EPA requirement for sludge reduction NET! EM WASTE TREATMENT SYSTEMS • 1-300 GPM flow * Skid mounted or component installation in your plant • EPA compliance our specialty * Call about our used equipment inventory FILTER PRESSES • .5-200 cu. ft, capacity • Automatic hydraulic closure or our cost saving manual Closure • Heavy duty steel construction • Polypre gasketed or diaphram membrane plates • Standard sizes or custom built to your specs • Used in EPA approved treatment systems Competitive Prices • Fast Delivery • Excellent Quality 777 E 82 St., Cleveland, Ohio 44103 216-881-7900 • Fax: 216-881-8950 http://www.metchem,com e-mail: [email protected] Circle 031 on reader information card or go to www.thru.to/webconnect November 2004 55
Transcript
Page 1: Clear chromate

ing inspectors, paint ing contrac- tors, and automotive refinishers. Circle 412 on reader service card

CLEAR CHROMATE Metalline Corp. www.jsamc2.com Metalline Sapphire 325 provides

300 hours in rack p la t ing over chloride zinc and over 100 hours in barrel. Single-component, and easy to use, Sapphire 325 is ideal for high corrosion protect ion in difficult environments where yel- low chromate is unattractive. Circle 413 on reader service card

cost polyimide film combined with a no-residue, fully cross-linked sili- cone adhesive. K-201, with its 1- mil fihn substrate, and K-202, with its 2-mil backing, provide flexible, durable resistance to chemicals, abrasion, contamination, and high temperature to produce the desired results. Its silicone adhesive oper- ates effectively between -100 to +500°F, suitable for almost every process environment. Circle 411 on reader service card

COATING THICKNESS GAUGE Paul N. Gardner Co. Inc. www.gardco.com The PosiTest DFT Coat ing Thickness Gauge is available in two models. The PosiTest DFT

Hea t~d Tank Evaporator System TM shown with optional ET~Companlon TM Condenser

for closed loop water recovery

Call Now fo r M o r e I n f o r m a t i o n

12161391-POLY

Heated Tank Evaporator S y s t e m M The Poly Products Evaporator System evaporates water from process solutions and waste waters under atmospheric conditions The highest evaporation rate can be achieved by heating the sotution prior to pumping it into the evaporator.

This is accomplished by using our heated tank with either a ga~ fired burner, steam coiI or elecIdc heater The patented (#4790904) ET Evaporative Tank TM is molded out of polyethylene, with no weed seams, for leak-free operation With over 2,000 products ~n the field, the Poty Products evaporator has proven to be the leader in atmospheric evaporation of water.

SYSTEM INCLUDES: • ET Evaporative Tank ~" • Control panel with temperature control, , Stainles~ or carbon steel heated over temperature protection and level

tank and fire tube controls

, Gas fired burner, steam coil, or • CPVC or stainless steel centrifugal pump electric heater • Optional filter press is available for

~,~ co~inuous solids removal

Circle 037 on reader information card or go to www.thra.to/webconnect

Ferrous measu re s nonmagnet ic coat ings on steel. The PosiTest DFT Combo measures both non- magnet ic coatings on steel and nonconduct ive coat ings on alu- minum, brass, etc. It automat i - cally recognizes the s u b s t r a t e and takes a measu remen t . The gauges are su i tab le for powder coaters, paint applicators, coat-

CLARIFIERS • 5-1000 GPM flow • Parallel plate design for

efficient solids settling with removable plate racks

• Ftoculation tank with mixer is standard

• Optional catwalk and ladder available

• Heavy duty epoxy coated steel construction

• Meets EPA discharge limits for industrial waste water

SLUDGE DRYERS • 1 7 5 cu f t

capacity • Uses low cost gas,

steam, hot water or electrical heat source to reduce sludge up to 75%

• Stainless steel internal parts

• Space saving design allows unit to fit under the filter press or elsewhere in the plant

• Meets EPA requirement for sludge reduction

NET! EM

WASTE TREATMENT SYSTEMS • 1-300 GPM flow * Skid mounted or

component installation in your plant

• EPA compliance our specialty

* Call about our used equipment inventory

FILTER PRESSES • .5-200 cu. ft,

capacity • Automatic

hydraulic closure or our cost saving manual Closure

• Heavy duty steel construction • Polypre gasketed or diaphram membrane plates • Standard sizes or custom built to your specs • Used in EPA approved treatment systems

Competitive Prices • Fast Delivery • Excellent Quality 777 E 82 St., Cleveland, Ohio 44103 216-881-7900 • Fax: 216-881-8950 http://www.metchem,com e-mail: [email protected]

Circle 031 on reader information card or go to www.thru.to/webconnect

November 2004 55

Recommended